summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-09-24mt76: mt7915: simplify aggregation session checkFelix Fietkau
Use the txwi data as primary source information to avoid touching skb data Use bitfield instead of state variable + spinlock Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7615: remove mtxq->agg_ssn assignmentFelix Fietkau
It is not used anywhere for this driver Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: move mt76_check_agg_ssn to driver tx_prepare callsFelix Fietkau
mt7615 and newer drivers do not need this, since they use sequence number offload Moving this code also reduces the number of callsites to make it easier to review Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7915: enable offloading of sequence number assignmentFelix Fietkau
Preparation for supporting more offload features Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7915: increase tx retry countFelix Fietkau
Set it to 15 to match reference driver Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7915: clean up station stats polling and rate control updateFelix Fietkau
Queueing a per-sta work item from the tx free path can become very expensive under load. This work is only supposed to pull rate control stats every second and deal with rate control changes. Additionally, the rate control update code was wrong, because it was confusing bit masks and bit numbers in test_bit. Fix this by introducing a dedicated device work item for rate control updates, and by polling station stats from the phy mac work. Stations requiring polling or rate control updates are added to lists protected by dev->sta_poll_lock. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7915: do not do any work in napi poll after calling napi_complete_done()Felix Fietkau
Fixes a race condition where multiple tx cleanup or sta poll tasks could run in parallel. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7615: do not do any work in napi poll after calling napi_complete_done()Felix Fietkau
Fixes a race condition where multiple tx cleanup tasks could run in parallel Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt76x02: clean up and fix interrupt masking in the irq handlerFelix Fietkau
Only clear unmasked interrupts. If an interrupt is temporarily masked, its pending events need to be processed later, even if another interrupt happened in the mean time. Disable interrupts in one call before scheduling Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7615: only clear unmasked interrupts in irq taskletFelix Fietkau
If an interrupt is temporarily masked, its pending events need to be processed later, even if another interrupt happened in the mean time. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7915: clean up and fix interrupt masking in the irq handlerFelix Fietkau
Only clear unmasked interrupts. If an interrupt is temporarily masked, its pending events need to be processed later, even if another interrupt happened in the mean time. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: set interrupt mask register to 0 before requesting irqFelix Fietkau
Avoids spurious interrupts in case the hardware was running already Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: fix double DMA unmap of the first buffer on 7615/7915Felix Fietkau
A small part of the first skb buffer is passed to the firmware for parsing via DMA, while the full buffer is passed as part of the TXP. Avoid calling DMA unmap on the first part (with a different length than map) Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7915: fix crash on tx rate report for invalid stationsFelix Fietkau
Check wcid RCU pointer before using it Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7915: enable U-APSD on AP sideRyder Lee
Enable U-APSD support for AP interface. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt76s: get rid of unused variableLorenzo Bianconi
Remove unused state variable in mt76_sdio structure Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt76s: move tx/rx processing in 2 separate worksLorenzo Bianconi
In order to maximize parallelism, split status work in tx status work and rx net work Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt76s: move status processing in txrx wqLorenzo Bianconi
As it has been done for tx and rx processing, move tx/rx status processing into mt76s_txrx_wq workqueue Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7663s: move rx processing in txrx wqLorenzo Bianconi
Move rx processing to mt76s_txrx_wq in order to minimize the interval when the sdio bus is locked during rx Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt76s: move tx processing in a dedicated wqLorenzo Bianconi
Introduce mt76s_txrx_wq workqueue and move tx processing from kthread to a dedicated work. This is preliminary patch to improve mt7663s throughput Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt76s: fix oom in mt76s_tx_queue_skb_rawLorenzo Bianconi
Free the mcu skb in case of error in mt76s_tx_queue_skb_raw routine Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7615: reschedule runtime-pm receiving a tx interruptLorenzo Bianconi
Reschedule runtime-pm after receiving a tx interrupt. Update runtime-pm last activity before injecting packets Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: do not inject packets if MT76_STATE_PM is setLorenzo Bianconi
Do not tx packets in mt76_txq_send_burst() or mt76_txq_schedule_list() if the device is in runtime-pm Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7615: hold mt76 lock queueing wd in mt7615_queue_key_updateLorenzo Bianconi
wq queue is always updated holding mt76 spinlock. Grab mt76 lock in mt7615_queue_key_update() before putting a new element at the end of the queue. Fixes: eb99cc95c3b65 ("mt76: mt7615: introduce mt7663u support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7663s: move drv_own/fw_own in mt7615_mcu_opsLorenzo Bianconi
Initialize set_drv_ctrl and set_fw_ctrl function pointers in mt7663s_mcu_init. This is a preliminary patch to enable runtime-pm for mt7663s chipset. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7615: move drv_own/fw_own in mt7615_mcu_opsLorenzo Bianconi
Introduce set_drv_ctrl and set_fw_ctrl function pointers in mt7615_mcu_ops data structure. This is a preliminary patch to enable runtime-pm for non-pci chipsets Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7615: register ext_phy if DBDC is detectedShayne Chen
MT_EE_WIFI_CONF field can be used to detect if the chipset is MT7615D. Thus, add support to automatically register ext_phy if DBDC is detected. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24Merge tag 'mmc-v5.9-rc4-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fix from Ulf Hansson: "Fix build warning in mmc_spi when CONFIG_HAS_DMA is unset" * tag 'mmc-v5.9-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: mmc_spi: Fix mmc_spi_dma_alloc() return type for !HAS_DMA
2020-09-24Merge tag 'media/v5.9-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: - fix a regression at the CEC adapter core - two uAPI patches (one revert) for changes in this development cycle * tag 'media/v5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: dt-bindings: media: imx274: Convert to json-schema media: media/v4l2: remove V4L2_FLAG_MEMORY_NON_CONSISTENT flag media: cec-adap.c: don't use flush_scheduled_work()
2020-09-24Merge tag 'sound-5.9-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Just a handful small device-specific fixes including a couple of reverts" * tag 'sound-5.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: Revert "ALSA: usb-audio: Disable Lenovo P620 Rear line-in volume control" Revert "ALSA: hda - Fix silent audio output and corrupted input on MSI X570-A PRO" ALSA: usb-audio: Add delay quirk for H570e USB headsets ALSA: hda/realtek: Enable front panel headset LED on Lenovo ThinkStation P520 ALSA: hda/realtek - Couldn't detect Mic if booting with headset plugged ALSA: asihpi: fix iounmap in error handler
2020-09-24zd1201: simplify the return expression of zd1201_set_maxassoc()Qinglang Miao
Simplify the return expression. Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200921131115.93504-1-miaoqinglang@huawei.com
2020-09-24rtw88: Fix potential probe error handling race with wow firmware loadingAndreas Färber
If rtw_core_init() fails to load the wow firmware, rtw_core_deinit() will not get called to clean up the regular firmware. Ensure that an error loading the wow firmware does not produce an oops for the regular firmware by waiting on its completion to be signalled before returning. Also release the loaded firmware. Fixes: c8e5695eae99 ("rtw88: load wowlan firmware if wowlan is supported") Cc: Chin-Yen Lee <timlee@realtek.com> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200920132621.26468-3-afaerber@suse.de
2020-09-24rtw88: Fix probe error handling race with firmware loadingAndreas Färber
In case of rtw8822be, a probe failure after successful rtw_core_init() has been observed to occasionally lead to an oops from rtw_load_firmware_cb(): [ 3.924268] pci 0001:01:00.0: [10ec:b822] type 00 class 0xff0000 [ 3.930531] pci 0001:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 3.936360] pci 0001:01:00.0: reg 0x18: [mem 0x00000000-0x0000ffff 64bit] [ 3.944042] pci 0001:01:00.0: supports D1 D2 [ 3.948438] pci 0001:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 3.957312] pci 0001:01:00.0: BAR 2: no space for [mem size 0x00010000 64bit] [ 3.964645] pci 0001:01:00.0: BAR 2: failed to assign [mem size 0x00010000 64bit] [ 3.972332] pci 0001:01:00.0: BAR 0: assigned [io 0x10000-0x100ff] [ 3.986240] rtw_8822be 0001:01:00.0: enabling device (0000 -> 0001) [ 3.992735] rtw_8822be 0001:01:00.0: failed to map pci memory [ 3.998638] rtw_8822be 0001:01:00.0: failed to request pci io region [ 4.005166] rtw_8822be 0001:01:00.0: failed to setup pci resources [ 4.011580] rtw_8822be: probe of 0001:01:00.0 failed with error -12 [ 4.018827] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 4.029121] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 4.050828] Unable to handle kernel paging request at virtual address edafeaac9607952c [ 4.058975] Mem abort info: [ 4.058980] ESR = 0x96000004 [ 4.058990] EC = 0x25: DABT (current EL), IL = 32 bits [ 4.070353] SET = 0, FnV = 0 [ 4.073487] EA = 0, S1PTW = 0 [ 4.073501] dw-apb-uart 98007800.serial: forbid DMA for kernel console [ 4.076723] Data abort info: [ 4.086415] ISV = 0, ISS = 0x00000004 [ 4.087731] Freeing unused kernel memory: 1792K [ 4.090391] CM = 0, WnR = 0 [ 4.098091] [edafeaac9607952c] address between user and kernel address ranges [ 4.105418] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 4.111129] Modules linked in: [ 4.114275] CPU: 1 PID: 31 Comm: kworker/1:1 Not tainted 5.9.0-rc5-next-20200915+ #700 [ 4.122386] Hardware name: Realtek Saola EVB (DT) [ 4.127223] Workqueue: events request_firmware_work_func [ 4.132676] pstate: 60000005 (nZCv daif -PAN -UAO BTYPE=--) [ 4.138393] pc : rtw_load_firmware_cb+0x54/0xbc [ 4.143040] lr : request_firmware_work_func+0x44/0xb4 [ 4.148217] sp : ffff800010133d70 [ 4.151616] x29: ffff800010133d70 x28: 0000000000000000 [ 4.157069] x27: 0000000000000000 x26: 0000000000000000 [ 4.162520] x25: 0000000000000000 x24: 0000000000000000 [ 4.167971] x23: ffff00007ac21908 x22: ffff00007ebb2100 [ 4.173424] x21: ffff00007ad35880 x20: edafeaac96079504 [ 4.178877] x19: ffff00007ad35870 x18: 0000000000000000 [ 4.184328] x17: 00000000000044d8 x16: 0000000000004310 [ 4.189780] x15: 0000000000000800 x14: 00000000ef006305 [ 4.195231] x13: ffffffff00000000 x12: ffffffffffffffff [ 4.200682] x11: 0000000000000020 x10: 0000000000000003 [ 4.206135] x9 : 0000000000000000 x8 : ffff00007e73f680 [ 4.211585] x7 : 0000000000000000 x6 : ffff80001119b588 [ 4.217036] x5 : ffff00007e649c80 x4 : ffff00007e649c80 [ 4.222487] x3 : ffff80001119b588 x2 : ffff8000108d1718 [ 4.227940] x1 : ffff800011bd5000 x0 : ffff00007ac21600 [ 4.233391] Call trace: [ 4.235906] rtw_load_firmware_cb+0x54/0xbc [ 4.240198] request_firmware_work_func+0x44/0xb4 [ 4.245027] process_one_work+0x178/0x1e4 [ 4.249142] worker_thread+0x1d0/0x268 [ 4.252989] kthread+0xe8/0xf8 [ 4.256127] ret_from_fork+0x10/0x18 [ 4.259800] Code: f94013f5 a8c37bfd d65f03c0 f9000260 (f9401681) [ 4.266049] ---[ end trace f822ebae1a8545c2 ]--- To avoid this, wait on the completion callbacks in rtw_core_deinit() before releasing firmware and continuing teardown. Note that rtw_wait_firmware_completion() was introduced with c8e5695eae9959fc5774c0f490f2450be8bad3de ("rtw88: load wowlan firmware if wowlan is supported"), so backports to earlier branches may need to inline wait_for_completion(&rtwdev->fw.completion) instead. Fixes: e3037485c68e ("rtw88: new Realtek 802.11ac driver") Fixes: c8e5695eae99 ("rtw88: load wowlan firmware if wowlan is supported") Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200920132621.26468-2-afaerber@suse.de
2020-09-24brcmfmac: check return value of driver_for_each_device()Zhang Changzhong
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c:1576:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable] 1576 | int ret; | ^~~ driver_for_each_device() has been declared with __must_check, so the return value should be checked. Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1600481191-14250-1-git-send-email-zhangchangzhong@huawei.com
2020-09-25scripts/kallsyms: skip ppc compiler stub *.long_branch.* / *.plt_branch.*Masahiro Yamada
PowerPC allmodconfig often fails to build as follows: LD .tmp_vmlinux.kallsyms1 KSYM .tmp_vmlinux.kallsyms1.o LD .tmp_vmlinux.kallsyms2 KSYM .tmp_vmlinux.kallsyms2.o LD .tmp_vmlinux.kallsyms3 KSYM .tmp_vmlinux.kallsyms3.o LD vmlinux SORTTAB vmlinux SYSMAP System.map Inconsistent kallsyms data Try make KALLSYMS_EXTRA_PASS=1 as a workaround make[2]: *** [../Makefile:1162: vmlinux] Error 1 Setting KALLSYMS_EXTRA_PASS=1 does not help. This is caused by the compiler inserting stubs such as *.long_branch.* and *.plt_branch.* $ powerpc-linux-nm -n .tmp_vmlinux.kallsyms2 [ snip ] c00000000210c010 t 00000075.plt_branch.da9:19 c00000000210c020 t 00000075.plt_branch.1677:5 c00000000210c030 t 00000075.long_branch.memmove c00000000210c034 t 00000075.plt_branch.9e0:5 c00000000210c044 t 00000075.plt_branch.free_initrd_mem ... Actually, the problem mentioned in scripts/link-vmlinux.sh comments; "In theory it's possible this results in even more stubs, but unlikely" is happening here, and ends up with another kallsyms step required. scripts/kallsyms.c already ignores various compiler stubs. Let's do similar to make kallsysms for PowerPC always succeed in 2 steps. Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: Guenter Roeck <linux@roeck-us.net>
2020-09-24mm: fix misplaced unlock_page in do_wp_page()Linus Torvalds
Commit 09854ba94c6a ("mm: do_wp_page() simplification") reorganized all the code around the page re-use vs copy, but in the process also moved the final unlock_page() around to after the wp_page_reuse() call. That normally doesn't matter - but it means that the unlock_page() is now done after releasing the page table lock. Again, not a big deal, you'd think. But it turns out that it's very wrong indeed, because once we've released the page table lock, we've basically lost our only reference to the page - the page tables - and it could now be free'd at any time. We do hold the mmap_sem, so no actual unmap() can happen, but madvise can come in and a MADV_DONTNEED will zap the page range - and free the page. So now the page may be free'd just as we're unlocking it, which in turn will usually trigger a "Bad page state" error in the freeing path. To make matters more confusing, by the time the debug code prints out the page state, the unlock has typically completed and everything looks fine again. This all doesn't happen in any normal situations, but it does trigger with the dirtyc0w_child LTP test. And it seems to trigger much more easily (but not expclusively) on s390 than elsewhere, probably because s390 doesn't do the "batch pages up for freeing after the TLB flush" that gives the unlock_page() more time to complete and makes the race harder to hit. Fixes: 09854ba94c6a ("mm: do_wp_page() simplification") Link: https://lore.kernel.org/lkml/a46e9bbef2ed4e17778f5615e818526ef848d791.camel@redhat.com/ Link: https://lore.kernel.org/linux-mm/c41149a8-211e-390b-af1d-d5eee690fecb@linux.alibaba.com/ Reported-by: Qian Cai <cai@redhat.com> Reported-by: Alex Shi <alex.shi@linux.alibaba.com> Bisected-and-analyzed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Tested-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-09-24gpio: aspeed: fix ast2600 bank propertiesTao Ren
GPIO_U is mapped to the least significant byte of input/output mask, and the byte in "output" mask should be 0 because GPIO_U is input only. All the other bits need to be 1 because GPIO_V/W/X support both input and output modes. Similarly, GPIO_Y/Z are mapped to the 2 least significant bytes, and the according bits need to be 1 because GPIO_Y/Z support both input and output modes. Fixes: ab4a85534c3e ("gpio: aspeed: Add in ast2600 details to Aspeed driver") Signed-off-by: Tao Ren <rentao.bupt@gmail.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-09-24mt76: mt7615: reduce maximum VHT MPDU length to 7991Felix Fietkau
After fixing mac80211 to allow larger A-MSDUs in some cases, there have been reports of performance regressions and packet loss with some clients. It appears that the issue occurs when the hardware is transmitting A-MSDUs bigger than 8k. Limit the local VHT MPDU size capability to 7991, matching the value used for MT7915 as well. Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200923052442.24141-1-nbd@nbd.name
2020-09-24gpio/aspeed-sgpio: don't enable all interrupts by defaultJeremy Kerr
Currently, the IRQ setup for the SGPIO driver enables all interrupts in dual-edge trigger mode. Since the default handler is handle_bad_irq, any state change on input GPIOs will trigger bad IRQ warnings. This change applies sensible IRQ defaults: single-edge trigger, and all IRQs disabled. Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Fixes: 7db47faae79b ("gpio: aspeed: Add SGPIO driver") Reviewed-by: Joel Stanley <joel@jms.id.au> Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-09-24gpio/aspeed-sgpio: enable access to all 80 input & output sgpiosJeremy Kerr
Currently, the aspeed-sgpio driver exposes up to 80 GPIO lines, corresponding to the 80 status bits available in hardware. Each of these lines can be configured as either an input or an output. However, each of these GPIOs is actually an input *and* an output; we actually have 80 inputs plus 80 outputs. This change expands the maximum number of GPIOs to 160; the lower half of this range are the input-only GPIOs, the upper half are the outputs. We fix the GPIO directions to correspond to this mapping. This also fixes a bug when setting GPIOs - we were reading from the input register, making it impossible to set more than one output GPIO. Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Fixes: 7db47faae79b ("gpio: aspeed: Add SGPIO driver") Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-09-24gpio: pca953x: Fix uninitialized pending variableYe Li
When pca953x_irq_pending returns false, the pending parameter won't be set. But pca953x_irq_handler continues using this uninitialized variable as pending irqs and will cause problem. Fix the issue by initializing pending to 0. Fixes: 064c73afe738 ("gpio: pca953x: Synchronize interrupt handler properly") Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-09-24spi: bcm-qspi: Fix probe regression on iProc platformsRay Jui
iProc chips have QSPI controller that does not have the MSPI_REV offset. Reading from that offset will cause a bus error. Fix it by having MSPI_REV query disabled in the generic compatible string. Fixes: 3a01f04d74ef ("spi: bcm-qspi: Handle lack of MSPI_REV offset") Link: https://lore.kernel.org/linux-arm-kernel/20200909211857.4144718-1-f.fainelli@gmail.com/T/#u Signed-off-by: Ray Jui <ray.jui@broadcom.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20200910152539.45584-3-ray.jui@broadcom.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-24platform/x86: intel_pmc_core: do not create a static struct deviceGreg Kroah-Hartman
A struct device is a dynamic structure, with reference counting. "Tricking" the kernel to make a dynamic structure static, by working around the driver core release detection logic, is not nice. Because of this, this code has been used as an example for others on "how to do things", which is just about the worst thing possible to have happen. Fix this all up by making the platform device dynamic and providing a real release function. Cc: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com> Cc: Vishwanath Somayaji <vishwanath.somayaji@intel.com> Cc: Darren Hart <dvhart@infradead.org> Cc: Andy Shevchenko <andy@infradead.org> Cc: Rajat Jain <rajatja@google.com> Cc: platform-driver-x86@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reported-by: Maximilian Luz <luzmaximilian@gmail.com> Fixes: b02f6a2ef0a1 ("platform/x86: intel_pmc_core: Attach using APCI HID "INT33A1"") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Rajat Jain <rajatja@google.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-09-24platform/x86: mlx-platform: Fix extended topology configuration for power ↵Vadim Pasternak
supply units Fix topology configuration for power supply units in structure 'mlxplat_mlxcpld_ext_pwr_items_data', due to hardware change. Note: no need to backport the fix, since there is no such hardware yet (equipped with four power) at the filed. Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-09-24platform/x86: pcengines-apuv2: Fix typo on define of ↵Ed Wildgoose
AMD_FCH_GPIO_REG_GPIO55_DEVSLP0 Schematics show that the GPIO number is 55 (not 59). Trivial typo. Signed-off-by: Ed Wildgoose <lists@wildgooses.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-09-24platform/x86: fix kconfig dependency warning for FUJITSU_LAPTOPNecip Fazil Yildiran
When FUJITSU_LAPTOP is enabled and NEW_LEDS is disabled, it results in the following Kbuild warning: WARNING: unmet direct dependencies detected for LEDS_CLASS Depends on [n]: NEW_LEDS [=n] Selected by [y]: - FUJITSU_LAPTOP [=y] && X86 [=y] && X86_PLATFORM_DEVICES [=y] && ACPI [=y] && INPUT [=y] && BACKLIGHT_CLASS_DEVICE [=y] && (ACPI_VIDEO [=n] || ACPI_VIDEO [=n]=n) The reason is that FUJITSU_LAPTOP selects LEDS_CLASS without depending on or selecting NEW_LEDS while LEDS_CLASS is subordinate to NEW_LEDS. Honor the kconfig menu hierarchy to remove kconfig dependency warnings. Reported-by: Hans de Goede <hdegoede@redhat.com> Fixes: d89bcc83e709 ("platform/x86: fujitsu-laptop: select LEDS_CLASS") Signed-off-by: Necip Fazil Yildiran <fazilyildiran@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-09-24platform/x86: fix kconfig dependency warning for LG_LAPTOPNecip Fazil Yildiran
When LG_LAPTOP is enabled and NEW_LEDS is disabled, it results in the following Kbuild warning: WARNING: unmet direct dependencies detected for LEDS_CLASS Depends on [n]: NEW_LEDS [=n] Selected by [y]: - LG_LAPTOP [=y] && X86 [=y] && X86_PLATFORM_DEVICES [=y] && ACPI [=y] && ACPI_WMI [=y] && INPUT [=y] The reason is that LG_LAPTOP selects LEDS_CLASS without depending on or selecting NEW_LEDS while LEDS_CLASS is subordinate to NEW_LEDS. Honor the kconfig menu hierarchy to remove kconfig dependency warnings. Fixes: dbf0c5a6b1f8 ("platform/x86: Add LG Gram laptop special features driver") Signed-off-by: Necip Fazil Yildiran <fazilyildiran@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Acked-by: mark gross <mgross@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-09-24platform/x86: thinkpad_acpi: initialize tp_nvram_state variableTom Rix
clang static analysis flags this represenative problem thinkpad_acpi.c:2523:7: warning: Branch condition evaluates to a garbage value if (!oldn->mute || ^~~~~~~~~~~ In hotkey_kthread() mute is conditionally set by hotkey_read_nvram() but unconditionally checked by hotkey_compare_and_issue_event(). So the tp_nvram_state variable s[2] needs to be initialized. Fixes: 01e88f25985d ("ACPI: thinkpad-acpi: add CMOS NVRAM polling for hot keys (v9)") Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Acked-by: mark gross <mgross@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-09-24platform/x86: intel-vbtn: Fix SW_TABLET_MODE always reporting 1 on the HP ↵Hans de Goede
Pavilion 11 x360 Commit cfae58ed681c ("platform/x86: intel-vbtn: Only blacklist SW_TABLET_MODE on the 9 / "Laptop" chasis-type") restored SW_TABLET_MODE reporting on the HP stream x360 11 series on which it was previously broken by commit de9647efeaa9 ("platform/x86: intel-vbtn: Only activate tablet mode switch on 2-in-1's"). It turns out that enabling SW_TABLET_MODE reporting on devices with a chassis-type of 10 ("Notebook") causes SW_TABLET_MODE to always report 1 at boot on the HP Pavilion 11 x360, which causes libinput to disable the kbd and touchpad. The HP Pavilion 11 x360's ACPI VGBS method sets bit 4 instead of bit 6 when NOT in tablet mode at boot. Inspecting all the DSDTs in my DSDT collection shows only one other model, the Medion E1239T ever setting bit 4 and it always sets this together with bit 6. So lets treat bit 4 as a second bit which when set indicates the device not being in tablet-mode, as we already do for bit 6. While at it also prefix all VGBS constant defines with "VGBS_". Fixes: cfae58ed681c ("platform/x86: intel-vbtn: Only blacklist SW_TABLET_MODE on the 9 / "Laptop" chasis-type") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Mark Gross <mgross@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-09-24platform/x86: asus-wmi: Add BATC battery name to the list of supportedMarius Iacob
The Intel Atom Cherry Trail platform reports a new battery name (BATC). Tested on ASUS Transformer Mini T103HAF. Signed-off-by: Marius Iacob <themariusus@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
generated by cgit (git 2.34.1) at 2025-09-15 18:56:16 +0000