| Age | Commit message (Collapse) | Author |
|---|
|
Instead of blanket returning -EUCLEAN for all the failures in
btrfs_check_leaf, use btrfs_tree_block_status and return the appropriate
status for each failure. Rename the helper to __btrfs_check_leaf and
then make a wrapper of btrfs_check_leaf that will return -EUCLEAN to
non-clean error codes. This will allow us to have the
__btrfs_check_leaf variant in btrfs-progs while keeping the behavior in
the kernel consistent.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We have a variety of item specific errors that can occur. For now
simply put these under the umbrella of BTRFS_TREE_BLOCK_INVALID_ITEM,
this can be fleshed out as we need in the future.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We use this in btrfs-progs to determine if we can fix different types of
corruptions. We don't care about this in the kernel, however it would
be good to share this code between the kernel and btrfs-progs, so add
the status definitions so we can start converting the tree-checker code
over to using these status flags instead of blanket returning -EUCLEAN.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We have two helpers for checking leaves, because we have an extra check
for debugging in btrfs_mark_buffer_dirty(), and at that stage we may
have item data that isn't consistent yet. However we can handle this
case internally in the helper, if BTRFS_HEADER_FLAG_WRITTEN is set we
know the buffer should be internally consistent, otherwise we need to
skip checking the item data.
Simplify this helper down a single helper and handle the item data
checking logic internally to the helper.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We just pass in btrfs_header_level(eb) for the level, and we're passing
in the eb already, so simply get the level from the eb inside of
btrfs_set_block_flags.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This is completely related to block rsv's, move it out of the free space
cache code and into block-rsv.c.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
For P/Q stripe scrub, we have quite some duplicated read IO:
- Data stripes read for verification
This is triggered by the scrub_submit_initial_read() inside
scrub_raid56_parity_stripe().
- Data stripes read (again) for P/Q stripe verification
This is triggered by scrub_assemble_read_bios() from scrub_rbio().
Although we can have hit rbio cache and avoid unnecessary read, the
chance is very low, as scrub would easily flush the whole rbio cache.
This means, even we're just scrubbing a single P/Q stripe, we would read
the data stripes twice for the best case scenario. If we need to
recover some data stripes, it would cause more reads on the same data
stripes, again and again.
However before we call raid56_parity_submit_scrub_rbio() we already
have all data stripes repaired and their contents ready to use.
But RAID56 cache is unaware about the scrub cache, thus RAID56 layer
itself still needs to re-read the data stripes.
To avoid such cache miss, this patch would:
- Introduce a new helper, raid56_parity_cache_data_pages()
This function would grab the pages from an array, and copy the content
to the rbio, marking all the involved sectors uptodate.
The page copy is unavoidable because of the cache pages of rbio are all
self managed, thus can not utilize outside pages without screwing up
the lifespan.
- Use the repaired data stripes as cache inside
scrub_raid56_parity_stripe()
By this, we ensure all the data sectors of the scrub rbio are already
uptodate, and no need to read them again from disk.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Removing a free space entry from an in memory space cache requires having
the corresponding btrfs_free_space_ctl's 'tree_lock' held. We have several
code paths that remove an entry, so add assertions where appropriate to
verify we are holding the lock, as the lock is acquired by some other
function up in the call chain, which makes it easy to miss in the future.
Note: for this to work we need to lock the local btrfs_free_space_ctl at
load_free_space_cache(), which was not being done because it's local,
declared on the stack, so no other task has access to it.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When linking a free space entry, at link_free_space(), the caller should
be holding the spinlock 'tree_lock' of the given btrfs_free_space_ctl
argument, which is necessary for manipulating the red black tree of free
space entries (done by tree_insert_offset(), which already asserts the
lock is held) and for manipulating the 'free_space', 'free_extents',
'discardable_extents' and 'discardable_bytes' counters of the given
struct btrfs_free_space_ctl.
So assert that the spinlock 'tree_lock' of the given btrfs_free_space_ctl
is held by the current task. We have multiple code paths that end up
calling link_free_space(), and all currently take the lock before calling
it.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When searching for a free space entry by offset, at tree_search_offset(),
we are supposed to have the btrfs_free_space_ctl's 'tree_lock' held, so
assert that. We have multiple callers of tree_search_offset(), and all
currently hold the necessary lock before calling it.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There are multiple code paths leading to tree_insert_offset(), and each
path takes the necessary locks before tree_insert_offset() is called,
since they do other things that require those locks to be held. This makes
it easy to miss the locking somewhere, so make tree_insert_offset() assert
that the required locks are being held by the calling task.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
For the in-memory component of space caching (free space cache and free
space tree), three of the arguments passed to tree_insert_offset() can
always be taken from the new free space entry that we are about to add.
So simplify tree_insert_offset() to take the new entry instead of the
'offset', 'node' and 'bitmap' arguments. This will also allow to make
further changes simpler.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The are two computations of end offsets at do_trimming() that are not
necessary, as they were previously computed and stored in local const
variables. So just use the variables instead, to make the source code
shorter and easier to read.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
At try_merge_free_space(), avoid calling twice rb_prev() to find the
previous node, as that requires looping through the red black tree, so
store the result of the rb_prev() call and then use it.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
At copy_free_space_cache(), we add a new entry to the block group's ctl
before we free the entry from the temporary ctl. Adding a new entry
requires the allocation of a new struct btrfs_free_space, so we can
avoid a temporary extra allocation by freeing the entry from the
temporary ctl before we add a new entry to the main ctl, which possibly
also reduces the chances for a memory allocation failure in case of very
high memory pressure. So just do that.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
A small code simplification, move the default value of transid to its
initialization and remove the else-statement.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[PROBLEM]
When relocation fails (mostly due to checksum mismatch), we only got
very cryptic error messages like:
BTRFS info (device dm-4): relocating block group 13631488 flags data
BTRFS warning (device dm-4): csum failed root -9 ino 257 off 0 csum 0x373e1ae3 expected csum 0x98757625 mirror 1
BTRFS error (device dm-4): bdev /dev/mapper/test-scratch1 errs: wr 0, rd 0, flush 0, corrupt 1, gen 0
BTRFS info (device dm-4): balance: ended with status: -5
The end user has to decipher the above messages and use various tools to
locate the affected files and find a way to fix the problem (mostly
deleting the file). This is not an easy work even for experienced
developer, not to mention the end users.
[SCRUB IS DOING BETTER]
By contrast, scrub is providing much better error messages:
BTRFS error (device dm-4): unable to fixup (regular) error at logical 13631488 on dev /dev/mapper/test-scratch1 physical 13631488
BTRFS warning (device dm-4): checksum error at logical 13631488 on dev /dev/mapper/test-scratch1, physical 13631488, root 5, inode 257, offset 0, length 4096, links 1 (path: file)
BTRFS info (device dm-4): scrub: finished on devid 1 with status: 0
Which provides the affected files directly to the end user.
[IMPROVEMENT]
Instead of the generic data checksum error messages, which is not doing
a good job for data reloc inodes, this patch introduce a scrub like
backref walking based solution.
When a sector fails its checksum for data reloc inode, we go the
following workflow:
- Get the real logical bytenr
For data reloc inode, the file offset is the offset inside the block
group.
Thus the real logical bytenr is @file_off + @block_group->start.
- Do an extent type check
If it's tree blocks it's much easier to handle, just go through
all the tree block backref.
- Do a backref walk and inode path resolution for data extents
This is mostly the same as scrub.
But unfortunately we can not reuse the same function as the output
format is different.
Now the new output would be more user friendly:
BTRFS info (device dm-4): relocating block group 13631488 flags data
BTRFS warning (device dm-4): csum failed root -9 ino 257 off 0 logical 13631488 csum 0x373e1ae3 expected csum 0x98757625 mirror 1
BTRFS warning (device dm-4): checksum error at logical 13631488 mirror 1 root 5 inode 257 offset 0 length 4096 links 1 (path: file)
BTRFS error (device dm-4): bdev /dev/mapper/test-scratch1 errs: wr 0, rd 0, flush 0, corrupt 2, gen 0
BTRFS info (device dm-4): balance: ended with status: -5
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Now that btrfs_wq_submit_bio is never called for synchronous I/O,
the hipri_workers workqueue is not used anymore and can be removed.
Reviewed-by: Chris Mason <clm@fb.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The writeback_control structure already passes down the information about
a writeback being synchronous from the core VM code, and thus information
is propagated into the bio REQ_SYNC flag through the wbc_to_write_flags
helper.
Use that information to decide if checksums calculation is offloaded to
a workqueue instead of btrfs_inode::sync_writers field that not only
bloats the inode but also has too wide scope, being inode wide instead
of limited to the actual writeback request.
The sync writes were set in:
- btrfs_do_write_iter - regular IO, sync status is set
- start_ordered_ops - ordered write start, writeback with WB_SYNC_ALL
mode
- btrfs_write_marked_extents - write marked extents, writeback with
WB_SYNC_ALL mode
Reviewed-by: Chris Mason <clm@fb.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Most modern hardware supports very fast accelerated crc32c calculation.
If that is supported the CPU overhead of the checksum calculation is
very limited, and offloading the calculation to special worker threads
has a lot of overhead for no gain.
E.g. on an Intel Optane device is actually very much slows down even
1M buffered writes with fio:
Unpatched:
write: IOPS=3316, BW=3316MiB/s (3477MB/s)(200GiB/61757msec); 0 zone resets
With synchronous CRCs:
write: IOPS=4882, BW=4882MiB/s (5119MB/s)(200GiB/41948msec); 0 zone resets
With a lot of variation during the unpatched run going down as low as
1100MB/s, while the synchronous CRC version has about the same peak write
speed but much lower dips, and fewer kworkers churning around.
Both tests had fio saturated at 100% CPU.
(thanks to Jens Axboe via Chris Mason for the benchmarking)
Reviewed-by: Chris Mason <clm@fb.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Using SECTOR_SHIFT to convert LBA to physical address makes it more
readable.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Use SECTOR_SHIFT while converting a physical address to an LBA, makes
it more readable.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Improve the leaf dump behavior by:
- Always dump the leaf first, then the error message
- Output the slot number if possible
Especially in __btrfs_free_extent() the leaf dump of extent tree can
be pretty large.
With an extra slot number it's much easier to locate the problem.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Since print-tree infrastructure only prints the content of a tree block,
we can make them to accept const extent buffer pointer.
This removes a forced type convert in extent-tree, where we convert a
const extent buffer pointer to regular one, just to avoid compiler
warning.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
bitmap_test_range_all_{set,zero} defined in subpage.c are useful for other
components. Move them to misc.h and use them in zoned.c. Also, as
find_next{,_zero}_bit take/return "unsigned long" instead of "unsigned
int", convert the type to "unsigned long".
While at it, also rewrite the "if (...) return true; else return false;"
pattern and add const to the input bitmap.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When checking siblings keys, before moving keys from one node/leaf to a
sibling node/leaf, it's very unexpected to have the last key of the left
sibling greater than or equals to the first key of the right sibling, as
that means we have a (serious) corruption that breaks the key ordering
properties of a b+tree. Since this is unexpected, surround the comparison
with the unlikely macro, which helps the compiler generate better code
for the most expected case (no existing b+tree corruption). This is also
what we do for other unexpected cases of invalid key ordering (like at
btrfs_set_item_key_safe()).
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The function btrfs_free_device() is never used outside of volumes.c, so
make it static and remove its prototype declaration at volumes.h.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Recently a Meta-internal workload encountered subvolume creation taking
up to 2s each, significantly slower than directory creation. As they
were hoping to be able to use subvolumes instead of directories, and
were looking to create hundreds, this was a significant issue. After
Josef investigated, it turned out to be due to the transaction commit
currently performed at the end of subvolume creation.
This change improves the workload by not doing transaction commit for every
subvolume creation, and merely requiring a transaction commit on fsync.
In the worst case, of doing a subvolume create and fsync in a loop, this
should require an equal amount of time to the current scheme; and in the
best case, the internal workload creating hundreds of subvolumes before
fsyncing is greatly improved.
While it would be nice to be able to use the log tree and use the normal
fsync path, log tree replay can't deal with new subvolume inodes
presently.
It's possible that there's some reason that the transaction commit is
necessary for correctness during subvolume creation; however,
git logs indicate that the commit dates back to the beginning of
subvolume creation, and there are no notes on why it would be necessary.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
btrfs_prev_leaf() is not used outside ctree.c, so there's no need to
export it at ctree.h - just make it static at ctree.c and move its
definition above btrfs_search_slot_for_read(), since that function
calls it.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Add q6apm mmap and copy compress DAI callbacks to support compress
offload playback.
Co-developed-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Signed-off-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230619101653.9750-12-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add q6apm compress DAI callbacks for setting params and metadata to support
compress offload playback.
Co-developed-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Signed-off-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230619101653.9750-11-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add q6apm trigger and pointer compress DAI callbacks to support
compress offload playback.
Co-developed-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Signed-off-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230619101653.9750-10-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add q6apm get compress DAI capabilities and codec capabilities callbacks
to support compress offload playback.
Co-developed-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Signed-off-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230619101653.9750-9-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add q6apm open and free compress DAI callbacks to support compress
offload playback.
Include compress event handler callback also.
Co-developed-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Signed-off-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230619101653.9750-8-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add support for setting EOS delay command and receive the
EOS response from ADSP, for seamless compress offload
playback feature.
Co-developed-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Signed-off-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230619101653.9750-7-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add function for setting compress params.
Signed-off-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Co-developed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230619101653.9750-6-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add placeholder decoder graph module for compressed playback feature.
Co-developed-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Signed-off-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230619101653.9750-5-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Some of the Audioreach commands take a u32 value,
ex: PARAM_ID_MODULE_ENABLE.
It makes more sense to provide a helper function so that other new
commands can reuse this.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230619101653.9750-4-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
EOS event from dsp is currently not sent to the dai drivers, add the
missing callback.
Signed-off-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230619101653.9750-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add support to set backend params such as sampling rate and
number of channels using backend params fixup callback.
Also add no pcm check for hardware params constraints setting.
Signed-off-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230619101653.9750-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The rt5682 can only support single register read and write operations
so does not benefit from block writes. This means it gets no benefit from
using the rbtree register cache over the maple tree register cache so
convert it to use maple trees instead, it is more modern.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-asoc-rt-maple-v1-16-729c6553cdcf@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The rt5670 can only support single register read and write operations
so does not benefit from block writes. This means it gets no benefit from
using the rbtree register cache over the maple tree register cache so
convert it to use maple trees instead, it is more modern.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-asoc-rt-maple-v1-15-729c6553cdcf@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The rt5668 can only support single register read and write operations
so does not benefit from block writes. This means it gets no benefit from
using the rbtree register cache over the maple tree register cache so
convert it to use maple trees instead, it is more modern.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-asoc-rt-maple-v1-14-729c6553cdcf@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The rt5665 can only support single register read and write operations
so does not benefit from block writes. This means it gets no benefit from
using the rbtree register cache over the maple tree register cache so
convert it to use maple trees instead, it is more modern.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-asoc-rt-maple-v1-13-729c6553cdcf@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The rt5663 can only support single register read and write operations
so does not benefit from block writes. This means it gets no benefit from
using the rbtree register cache over the maple tree register cache so
convert it to use maple trees instead, it is more modern.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-asoc-rt-maple-v1-12-729c6553cdcf@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The rt5660 can only support single register read and write operations
so does not benefit from block writes. This means it gets no benefit from
using the rbtree register cache over the maple tree register cache so
convert it to use maple trees instead, it is more modern.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-asoc-rt-maple-v1-11-729c6553cdcf@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The rt5651 can only support single register read and write operations
so does not benefit from block writes. This means it gets no benefit from
using the rbtree register cache over the maple tree register cache so
convert it to use maple trees instead, it is more modern.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-asoc-rt-maple-v1-10-729c6553cdcf@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The rt5645 can only support single register read and write operations
so does not benefit from block writes. This means it gets no benefit from
using the rbtree register cache over the maple tree register cache so
convert it to use maple trees instead, it is more modern.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-asoc-rt-maple-v1-9-729c6553cdcf@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The rt5640 can only support single register read and write operations
so does not benefit from block writes. This means it gets no benefit from
using the rbtree register cache over the maple tree register cache so
convert it to use maple trees instead, it is more modern.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-asoc-rt-maple-v1-8-729c6553cdcf@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The rt5631 can only support single register read and write operations
so does not benefit from block writes. This means it gets no benefit from
using the rbtree register cache over the maple tree register cache so
convert it to use maple trees instead, it is more modern.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230609-asoc-rt-maple-v1-7-729c6553cdcf@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
