summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-01-24locking/lockdep: Avoid triggering hardlockup from debug_show_all_locks()Tejun Heo
debug_show_all_locks() iterates all tasks and print held locks whole holding tasklist_lock. This can take a while on a slow console device and may end up triggering NMI hardlockup detector if someone else ends up waiting for tasklist_lock. Touch the NMI watchdog while printing the held locks to avoid spuriously triggering the hardlockup detector. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kernel-team@fb.com Link: http://lkml.kernel.org/r/20180122220055.GB1771050@devbig577.frc2.facebook.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-24futex: Fix OWNER_DEAD fixupPeter Zijlstra
Both Geert and DaveJ reported that the recent futex commit: c1e2f0eaf015 ("futex: Avoid violating the 10th rule of futex") introduced a problem with setting OWNER_DEAD. We set the bit on an uninitialized variable and then entirely optimize it away as a dead-store. Move the setting of the bit to where it is more useful. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Reported-by: Dave Jones <davej@codemonkey.org.uk> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@us.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: c1e2f0eaf015 ("futex: Avoid violating the 10th rule of futex") Link: http://lkml.kernel.org/r/20180122103947.GD2228@hirez.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-23vmxnet3: repair memory leakNeil Horman
with the introduction of commit b0eb57cb97e7837ebb746404c2c58c6f536f23fa, it appears that rq->buf_info is improperly handled. While it is heap allocated when an rx queue is setup, and freed when torn down, an old line of code in vmxnet3_rq_destroy was not properly removed, leading to rq->buf_info[0] being set to NULL prior to its being freed, causing a memory leak, which eventually exhausts the system on repeated create/destroy operations (for example, when the mtu of a vmxnet3 interface is changed frequently. Fix is pretty straight forward, just move the NULL set to after the free. Tested by myself with successful results Applies to net, and should likely be queued for stable, please Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Reported-By: boyang@redhat.com CC: boyang@redhat.com CC: Shrikrishna Khare <skhare@vmware.com> CC: "VMware, Inc." <pv-drivers@vmware.com> CC: David S. Miller <davem@davemloft.net> Acked-by: Shrikrishna Khare <skhare@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-23ipv6: Fix getsockopt() for sockets with default IPV6_AUTOFLOWLABELBen Hutchings
Commit 513674b5a2c9 ("net: reevalulate autoflowlabel setting after sysctl setting") removed the initialisation of ipv6_pinfo::autoflowlabel and added a second flag to indicate whether this field or the net namespace default should be used. The getsockopt() handling for this case was not updated, so it currently returns 0 for all sockets for which IPV6_AUTOFLOWLABEL is not explicitly enabled. Fix it to return the effective value, whether that has been set at the socket or net namespace level. Fixes: 513674b5a2c9 ("net: reevalulate autoflowlabel setting after sysctl ...") Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-23pppoe: take ->needed_headroom of lower device into account on xmitGuillaume Nault
In pppoe_sendmsg(), reserving dev->hard_header_len bytes of headroom was probably fine before the introduction of ->needed_headroom in commit f5184d267c1a ("net: Allow netdevices to specify needed head/tailroom"). But now, virtual devices typically advertise the size of their overhead in dev->needed_headroom, so we must also take it into account in skb_reserve(). Allocation size of skb is also updated to take dev->needed_tailroom into account and replace the arbitrary 32 bytes with the real size of a PPPoE header. This issue was discovered by syzbot, who connected a pppoe socket to a gre device which had dev->header_ops->create == ipgre_header and dev->hard_header_len == 0. Therefore, PPPoE didn't reserve any headroom, and dev_hard_header() crashed when ipgre_header() tried to prepend its header to skb->data. skbuff: skb_under_panic: text:000000001d390b3a len:31 put:24 head:00000000d8ed776f data:000000008150e823 tail:0x7 end:0xc0 dev:gre0 ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:104! invalid opcode: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 1 PID: 3670 Comm: syzkaller801466 Not tainted 4.15.0-rc7-next-20180115+ #97 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:skb_panic+0x162/0x1f0 net/core/skbuff.c:100 RSP: 0018:ffff8801d9bd7840 EFLAGS: 00010282 RAX: 0000000000000083 RBX: ffff8801d4f083c0 RCX: 0000000000000000 RDX: 0000000000000083 RSI: 1ffff1003b37ae92 RDI: ffffed003b37aefc RBP: ffff8801d9bd78a8 R08: 1ffff1003b37ae8a R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: ffffffff86200de0 R13: ffffffff84a981ad R14: 0000000000000018 R15: ffff8801d2d34180 FS: 00000000019c4880(0000) GS:ffff8801db300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000208bc000 CR3: 00000001d9111001 CR4: 00000000001606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: skb_under_panic net/core/skbuff.c:114 [inline] skb_push+0xce/0xf0 net/core/skbuff.c:1714 ipgre_header+0x6d/0x4e0 net/ipv4/ip_gre.c:879 dev_hard_header include/linux/netdevice.h:2723 [inline] pppoe_sendmsg+0x58e/0x8b0 drivers/net/ppp/pppoe.c:890 sock_sendmsg_nosec net/socket.c:630 [inline] sock_sendmsg+0xca/0x110 net/socket.c:640 sock_write_iter+0x31a/0x5d0 net/socket.c:909 call_write_iter include/linux/fs.h:1775 [inline] do_iter_readv_writev+0x525/0x7f0 fs/read_write.c:653 do_iter_write+0x154/0x540 fs/read_write.c:932 vfs_writev+0x18a/0x340 fs/read_write.c:977 do_writev+0xfc/0x2a0 fs/read_write.c:1012 SYSC_writev fs/read_write.c:1085 [inline] SyS_writev+0x27/0x30 fs/read_write.c:1082 entry_SYSCALL_64_fastpath+0x29/0xa0 Admittedly PPPoE shouldn't be allowed to run on non Ethernet-like interfaces, but reserving space for ->needed_headroom is a more fundamental issue that needs to be addressed first. Same problem exists for __pppoe_xmit(), which also needs to take dev->needed_headroom into account in skb_cow_head(). Fixes: f5184d267c1a ("net: Allow netdevices to specify needed head/tailroom") Reported-by: syzbot+ed0838d0fa4c4f2b528e20286e6dc63effc7c14d@syzkaller.appspotmail.com Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Reviewed-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-23tracing: Update stack trace skipping for ORC unwinderSteven Rostedt (VMware)
With the addition of ORC unwinder and FRAME POINTER unwinder, the stack trace skipping requirements have changed. I went through the tracing stack trace dumps with ORC and with frame pointers and recalculated the proper values. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-01-23ftrace, orc, x86: Handle ftrace dynamically allocated trampolinesSteven Rostedt (VMware)
The function tracer can create a dynamically allocated trampoline that is called by the function mcount or fentry hook that is used to call the function callback that is registered. The problem is that the orc undwinder will bail if it encounters one of these trampolines. This breaks the stack trace of function callbacks, which include the stack tracer and setting the stack trace for individual functions. Since these dynamic trampolines are basically copies of the static ftrace trampolines defined in ftrace_*.S, we do not need to create new orc entries for the dynamic trampolines. Finding the return address on the stack will be identical as the functions that were copied to create the dynamic trampolines. When encountering a ftrace dynamic trampoline, we can just use the orc entry of the ftrace static function that was copied for that trampoline. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-01-23Merge tag 'pci-v4.15-fixes-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fix from Bjorn Helgaas: "Fix AMD regression due to not re-enabling the big window on resume (Christian König)" * tag 'pci-v4.15-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: x86/PCI: Enable AMD 64-bit window on resume
2018-01-23arm64: Turn on KPTI only on CPUs that need itJayachandran C
Whitelist Broadcom Vulcan/Cavium ThunderX2 processors in unmap_kernel_at_el0(). These CPUs are not vulnerable to CVE-2017-5754 and do not need KPTI when KASLR is off. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Jayachandran C <jnair@caviumnetworks.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-01-23arm64: Branch predictor hardening for Cavium ThunderX2Jayachandran C
Use PSCI based mitigation for speculative execution attacks targeting the branch predictor. We use the same mechanism as the one used for Cortex-A CPUs, we expect the PSCI version call to have a side effect of clearing the BTBs. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Jayachandran C <jnair@caviumnetworks.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-01-23Merge tag 'nfs-rdma-for-4.16-1' of ↵Trond Myklebust
git://git.linux-nfs.org/projects/anna/linux-nfs NFS-over-RDMA client updates for Linux 4.16 New features: - xprtrdma tracepoints Bugfixes and cleanups: - Fix memory leak if rpcrdma_buffer_create() fails - Fix allocating extra rpcrdma_reps for the backchannel - Remove various unused and redundant variables and lock cycles - Fix IPv6 support in xprt_rdma_set_port() - Fix memory leak by calling buf_free for callback replies - Fix "bytes registered" accounting - Fix kernel-doc comments - SUNRPC tracepoint cleanups for consistent information - Optimizations for __rpc_execute()
2018-01-23nvme-pci: Fix queue double allocationsKeith Busch
The queue count says the highest queue that's been allocated, so don't reallocate a queue lower than that. Fixes: 147b27e4bd0 ("nvme-pci: allocate device queues storage space at probe") Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-01-23x86/ftrace: Fix ORC unwinding from ftrace handlersJosh Poimboeuf
Steven Rostedt discovered that the ftrace stack tracer is broken when it's used with the ORC unwinder. The problem is that objtool is instructed by the Makefile to ignore the ftrace_64.S code, so it doesn't generate any ORC data for it. Fix it by making the asm code objtool-friendly: - Objtool doesn't like the fact that save_mcount_regs pushes RBP at the beginning, but it's never restored (directly, at least). So just skip the original RBP push, which is only needed for frame pointers anyway. - Annotate some functions as normal callable functions with ENTRY/ENDPROC. - Add an empty unwind hint to return_to_handler(). The return address isn't on the stack, so there's nothing ORC can do there. It will just punt in the unlikely case it tries to unwind from that code. With all that fixed, remove the OBJECT_FILES_NON_STANDARD Makefile annotation so objtool can read the file. Link: http://lkml.kernel.org/r/20180123040746.ih4ep3tk4pbjvg7c@treble Reported-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-01-23SUNRPC: Fix null rpc_clnt dereference in rpc_task_queued tracepointBenjamin Coddington
Backchannel tasks will not have a reference to the rpc_clnt. Return -1 for cl_clid in that case. Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Trond Myklebust <trondmy@gmail.com>
2018-01-23signal/memory-failure: Use force_sig_mceerr and send_sig_mceerrEric W. Biederman
Delegate filling out struct siginfo to functions in kernel/signal.c to simplify the code. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-01-23mm/memory_failure: Remove unused trapno from memory_failureEric W. Biederman
Today 4 architectures set ARCH_SUPPORTS_MEMORY_FAILURE (arm64, parisc, powerpc, and x86), while 4 other architectures set __ARCH_SI_TRAPNO (alpha, metag, sparc, and tile). These two sets of architectures do not interesect so remove the trapno paramater to remove confusion. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-01-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix divide by zero in mlx5, from Talut Batheesh. 2) Guard against invalid GSO packets coming from untrusted guests and arriving in qdisc_pkt_len_init(), from Eric Dumazet. 3) Similarly add such protection to the various protocol GSO handlers. From Willem de Bruijn. 4) Fix regression added to IGMP source address checking for IGMPv3 reports, from Felix Feitkau. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: tls: Correct length of scatterlist in tls_sw_sendpage be2net: restore properly promisc mode after queues reconfiguration net: igmp: fix source address check for IGMPv3 reports gso: validate gso_type in GSO handlers net: qdisc_pkt_len_init() should be more robust ibmvnic: Allocate and request vpd in init_resources ibmvnic: Revert to previous mtu when unsupported value requested ibmvnic: Modify buffer size and number of queues on failover rds: tcp: compute m_ack_seq as offset from ->write_seq usbnet: silence an unnecessary warning cxgb4: fix endianness for vlan value in cxgb4_tc_flower cxgb4: set filter type to 1 for ETH_P_IPV6 net/mlx5e: Fix fixpoint divide exception in mlx5e_am_stats_compare
2018-01-23IB/srp: Add target_can_queue login parameterBart Van Assche
Although I'm not sure this parameter is useful for regular SRP users, setting this parameter to 1 has shown to be invaluable for testing the block layer core, SCSI core and device mapper queue running mechanisms. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-01-23IB/srp: Add RDMA/CM supportBart Van Assche
Since the SRP_LOGIN_REQ defined in the SRP standard is larger than what fits in the RDMA/CM login request private data, introduce a new login request format for the RDMA/CM. Note: since srp_daemon and ibsrpdm rely on the subnet manager and since there is no equivalent of the IB subnet manager in non-IB networks, login has to be performed manually for non-IB networks. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-01-23kobject: Export kobj_ns_grab_current() and kobj_ns_drop()Bart Van Assche
Make it possible to call these two functions from a kernel module. Note: despite their name, these two functions can be used meaningfully independent of kobjects. A later patch will add calls to these functions from the SRP driver because this patch series modifies the SRP driver such that it can hold a reference to a namespace that can last longer than the lifetime of the process through which the namespace reference was obtained. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-01-23arm64: Run enable method for errata work arounds on late CPUsSuzuki K Poulose
When a CPU is brought up after we have finalised the system wide capabilities (i.e, features and errata), we make sure the new CPU doesn't need a new errata work around which has not been detected already. However we don't run enable() method on the new CPU for the errata work arounds already detected. This could cause the new CPU running without potential work arounds. It is upto the "enable()" method to decide if this CPU should do something about the errata. Fixes: commit 6a6efbb45b7d95c84 ("arm64: Verify CPU errata work arounds on hotplugged CPU") Cc: Will Deacon <will.deacon@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Andre Przywara <andre.przywara@arm.com> Cc: Dave Martin <dave.martin@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-01-23block: Set BIO_TRACE_COMPLETION on new bio during splitGoldwyn Rodrigues
We inadvertently set it again on the source bio, but we need to set it on the new split bio instead. Fixes: fbbaf700e7b1 ("block: trace completion of all bios.") Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-23arm64: Move BP hardening to check_and_switch_contextMarc Zyngier
We call arm64_apply_bp_hardening() from post_ttbr_update_workaround, which has the unexpected consequence of being triggered on every exception return to userspace when ARM64_SW_TTBR0_PAN is selected, even if no context switch actually occured. This is a bit suboptimal, and it would be more logical to only invalidate the branch predictor when we actually switch to a different mm. In order to solve this, move the call to arm64_apply_bp_hardening() into check_and_switch_context(), where we're guaranteed to pick a different mm context. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-01-23SUNRPC: Micro-optimize __rpc_executeChuck Lever
The common case: There are 13 to 14 actions per RPC, and tk_callback is non-NULL in only one of them. There's no need to store a NULL in the tk_callback field during each FSM step. This slightly improves throughput results in dbench and other multi- threaded benchmarks on my two-socket client on 56Gb InfiniBand, but will probably be inconsequential on slower systems. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-01-23SUNRPC: task_run_action should display tk_callbackChuck Lever
This shows up in every RPC: kworker/4:1-19772 [004] 3467.373443: rpc_task_run_action: task:4711@2 flags=0e81 state=0005 status=0 action=call_status kworker/4:1-19772 [004] 3467.373444: rpc_task_run_action: task:4711@2 flags=0e81 state=0005 status=0 action=call_status What's actually going on is that the first iteration of the RPC scheduler is invoking the function in tk_callback (in this case, xprt_timer), then invoking call_status on the next iteration. Feeding do_action, rather than tk_action, to the "task_run_action" trace point will now always display the correct FSM step. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-01-23sunrpc: Format RPC events consistently for displayChuck Lever
Clean up: Make it easier to use text search when browsing a trace report. Other events use "status=%d". Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-01-23SUNRPC: Trace xprt_timer eventsChuck Lever
Track RPC timeouts: report the XID and the server address to match the content of network capture. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-01-23xprtrdma: Correct some documenting commentsChuck Lever
Fix kernel-doc warnings in net/sunrpc/xprtrdma/ . net/sunrpc/xprtrdma/verbs.c:1575: warning: No description found for parameter 'count' net/sunrpc/xprtrdma/verbs.c:1575: warning: Excess function parameter 'min_reqs' description in 'rpcrdma_ep_post_extra_recv' net/sunrpc/xprtrdma/backchannel.c:288: warning: No description found for parameter 'r_xprt' net/sunrpc/xprtrdma/backchannel.c:288: warning: Excess function parameter 'xprt' description in 'rpcrdma_bc_receive_call' Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-01-23xprtrdma: Fix "bytes registered" accountingChuck Lever
The contents of seg->mr_len changed when ->ro_map stopped returning the full chunk length in the first segment. Count the full length of each Write chunk, not the length of the first segment (which now can only be as large as a page). Fixes: 9d6b04097882 ("xprtrdma: Place registered MWs on a ... ") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-01-23xprtrdma: Instrument allocation/release of rpcrdma_req/rep objectsChuck Lever
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-01-23xprtrdma: Add trace points to instrument QP and CQ access upcallsChuck Lever
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-01-23xprtrdma: Add trace points in the client-side backchannel code pathsChuck Lever
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-01-23xprtrdma: Add trace points for connect eventsChuck Lever
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-01-23xprtrdma: Add trace points to instrument MR allocation and recoveryChuck Lever
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-01-23xprtrdma: Add trace points to instrument memory invalidationChuck Lever
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-01-23xprtrdma: Add trace points in reply decoder pathChuck Lever
This includes decoding Write and Reply chunks, and fixing up inline payloads. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-01-23xprtrdma: Add trace points to instrument memory registrationChuck Lever
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-01-23xprtrdma: Add trace points in the RPC Reply handler pathsChuck Lever
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-01-23xprtrdma: Add trace points in RPC Call transmit pathsChuck Lever
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-01-23rpcrdma: infrastructure for static trace points in rpcrdma.koChuck Lever
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-01-23rdma/ib: Add trace point macros to display human-readable valuesChuck Lever
These can be shared with all kernel ULPs, and more can easily be added as needed. Note: checkpatch.pl has some heartburn with the TRACE_DEFINE_ENUM macros and the LIST macros. These follow the same style as other header files under include/tracing/events , thus should be considered acceptable exceptions. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Acked-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-01-23GFS2: Log the reason for log flushes in every log headerBob Peterson
This patch just adds the capability for GFS2 to track which function called gfs2_log_flush. This should make it easier to diagnose problems based on the sequence of events found in the journals. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
2018-01-23GFS2: Introduce new gfs2_log_header_v2Bob Peterson
This patch adds a new structure called gfs2_log_header_v2 which is used to store expanded fields into previously unused areas of the log headers (i.e., this change is backwards compatible). Some of these are used for debug purposes so we can backtrack when problems occur. Others are reserved for future expansion. This patch is based on a prototype from Steve Whitehouse. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2018-01-23perf trace: Remove audit-libs dependency if syscall tables are presentHendrik Brueckner
Change the Makefile and build process to no longer require audit-libs interfaces when the architecture provides system call tables. Committer notes: Its not enough to hook into the NO_LIBAUDIT makefile block, we need to define a CONFIG_TRACE that gets selected by both architectures generating the syscall tables from the kernel headers and from detecting the availability of libaudit. With that in place we will not link against libaudit even if the necessary files are available for that, in fact we will not even try to detect its availability, speeding up a bit the feature detection phase. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: linux-s390@vger.kernel.org LPU-Reference: 1516352177-11106-6-git-send-email-brueckner@linux.vnet.ibm.com Link: https://lkml.kernel.org/n/tip-j68lub6ipm8apvy52vd3l4cm@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-23perf trace: Obtain errno strings by using arch_syscalls__strerrno()Hendrik Brueckner
Replace the errno_to_name() from the audit-libs with the newly introduced arch_syscalls__strerrno() function. With this change: 1. With replacing errno_to_name() from audit-libs, perf trace does no longer require audit-lib interfaces. 2. In addition to 1, the audit-libs dependency can be removed for architectures that support syscall tables in perf. This is achieved in a follow-up commit. 3. With the architecture specific errno number/name mapping, perf trace reports can work across architectures. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: linux-s390@vger.kernel.org LPU-Reference: 1516352177-11106-5-git-send-email-brueckner@linux.vnet.ibm.com Link: https://lkml.kernel.org/n/tip-xjvoqzhwmu4wn4kl9ng11rvs@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-23perf util: Introduce architecture specific errno/name mappingHendrik Brueckner
Introduce a script that generates a mapping of errno numbers to their names for each architecture that is supported by perf (i.e. has a subdirectory in tools/perf/arch/). The errno mapping is generated as part of the trace beautifiers and can be used by including the trace/beauty/arch_errno_names.c file. Then, use arch_syscalls__strerrno() to look up an errno value to obtain the errno name (e.g. ENOENT) for a particular architecture. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: linux-s390@vger.kernel.org LPU-Reference: 1516352177-11106-4-git-send-email-brueckner@linux.vnet.ibm.com Link: https://lkml.kernel.org/n/tip-8zlsjnuoep2ww39aq5z41fno@git.kernel.org [ Make x86 be the first arch, most common, add newline to last line, fixing build on centos:5 ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-23tools include asm-generic: Grab errno.h and errno-base.hHendrik Brueckner
This is a pre-req to generate an architecture specific mapping of errno numbers to their names. This errno mapping can be used by perf trace to support cross-architecture trace reports and to get rid of the audit-libs dependency. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: linux-s390@vger.kernel.org LPU-Reference: 1516352177-11106-3-git-send-email-brueckner@linux.vnet.ibm.com Link: https://lkml.kernel.org/n/tip-q13ystrw4sjz4wyvd3654cnm@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-23tools include arch: Grab a copy of errno.h for arch's supported by perfHendrik Brueckner
For each arch in tools/perf/arch, grab a copy of errno.h. This is a pre-req to generate an architecture specific mapping of errno numbers to their names. This errno mapping can be used by perf trace to support cross-architecture trace reports and to get rid of the audit-libs dependency. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: linux-s390@vger.kernel.org LPU-Reference: 1516352177-11106-2-git-send-email-brueckner@linux.vnet.ibm.com Link: https://lkml.kernel.org/n/tip-73azjhrzpjsskwi129020i2u@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-23perf build: Display EXTRA features for VF=1 buildJiri Olsa
Display the state of the rest of the features (FEATURE_TESTS_EXTRA) on a 'make VF=1' build. These features are detected manually by perf's Makefile.config so they can't be displayed with the main list, but only after we're done in Makefile.config. $ make VF=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... dwarf_getlocations: [ on ] ... glibc: [ on ] ... gtk2: [ on ] SNIP ... timerfd: [ on ] ... sched_getcpu: [ on ] ... sdt: [ on ] ... setns: [ on ] extra features: ... bionic: [ OFF ] ... compile-32: [ on ] ... compile-x32: [ OFF ] ... cplus-demangle: [ on ] ... hello: [ OFF ] ... libbabeltrace: [ on ] ... liberty: [ on ] ... liberty-z: [ on ] ... libunwind-debug-frame: [ OFF ] ... libunwind-debug-frame-arm: [ OFF ] ... libunwind-debug-frame-aarch64: [ OFF ] SNIP Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180109092646.GB11520@krava Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-23perf report: Fix regression when decoding intel_pt tracesMathieu Poirier
Commit (93d10af26bb7 perf tools: Optimize sample parsing for ordered events) breaks intelPT trace decoding by invariably returning an error if the event type isn't a PERF_SAMPLE_TIME. With this patch the timestamp is initialised and processing is allowed to continue if the error returned by function perf_evlist__parse_sample_timestamp() is not a fault. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Fixes: 93d10af26bb7 ("perf tools: Optimize sample parsing for ordered events") Link: http://lkml.kernel.org/r/1515616312-27645-1-git-send-email-mathieu.poirier@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-12 21:18:18 +0000