summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-09-11pinctrl: iproc-gpio: Fix incorrect pinconf configurationsLi Jin
Fix drive strength for AON/CRMU controller; fix pull-up/down setting for CCM/CDRU controller. Fixes: 616043d58a89 ("pinctrl: Rename gpio driver from cygnus to iproc") Signed-off-by: Li Jin <li.jin@broadcom.com> Link: https://lore.kernel.org/r/1567054348-19685-2-git-send-email-srinath.mannam@broadcom.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-09-11dt-bindings: arm: Convert Realtek board/soc bindings to json-schemaRob Herring
Convert Realtek SoC bindings to DT schema format using json-schema. Andreas is the only author and we agreed in person on licensing to be GPL2+/BSD. Cc: "Andreas Färber" <afaerber@suse.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: devicetree@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2019-09-11dt-bindings: arm: Convert Actions Semi bindings to jsonschemaRob Herring
Convert Actions Semi SoC bindings to DT schema format using json-schema. Cc: "Andreas Färber" <afaerber@suse.de> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: devicetree@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2019-09-11cfg80211: Purge frame registrations on iftype changeDenis Kenzior
Currently frame registrations are not purged, even when changing the interface type. This can lead to potentially weird situations where frames possibly not allowed on a given interface type remain registered due to the type switching happening after registration. The kernel currently relies on userspace apps to actually purge the registrations themselves, this is not something that the kernel should rely on. Add a call to cfg80211_mlme_purge_registrations() to forcefully remove any registrations left over prior to switching the iftype. Cc: stable@vger.kernel.org Signed-off-by: Denis Kenzior <denkenz@gmail.com> Link: https://lore.kernel.org/r/20190828211110.15005-1-denkenz@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-09-11lib/Kconfig: fix OBJAGG in lib/ menu structureRandy Dunlap
Keep the "Library routines" menu intact by moving OBJAGG into it. Otherwise OBJAGG is displayed/presented as an orphan in the various config menus. Fixes: 0a020d416d0a ("lib: introduce initial implementation of object aggregation manager") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jiri Pirko <jiri@mellanox.com> Cc: Ido Schimmel <idosch@mellanox.com> Cc: David S. Miller <davem@davemloft.net> Tested-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11Merge tag 'mlx5-updates-2019-09-10' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2019-09-10 Misc build warnings cleanup for mlx5: 1) Reduce stack usage in FW trace 2) Fix addr's type in mlx5dr_icm_dm 3) Fix rt's type in dr_action_create_reformat_action ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11Merge branch 'stmmac-next'David S. Miller
Jose Abreu says: ==================== net: stmmac: Improvements for -next Misc patches for -next. It includes: - Two fixes for features in -next only - New features support for GMAC cores (which includes GMAC4 and GMAC5) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11net: stmmac: ARP Offload for GMAC4+ CoresJose Abreu
Implement the ARP Offload feature in GMAC4 and GMAC5 cores. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11net: stmmac: Add support for VLAN Insertion Offload in GMAC4+Jose Abreu
Adds support for TX VLAN Offload using descriptors based features available in GMAC4/5. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11net: stmmac: Add support for SA Insertion/Replacement in GMAC4+Jose Abreu
Add the support for Source Address Insertion and Replacement in GMAC4 and GMAC5 cores. Two methods are supported: Descriptor based and register based. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11net: stmmac: xgmac: Reinitialize correctly a variableJose Abreu
'value' was being or'ed with a value from another register. This is a typo and could cause new written value to be wrong. Fix it. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11net: stmmac: Add VLAN HASH filtering support in GMAC4+Jose Abreu
Adds the support for VLAN HASH Filtering in GMAC4/5 cores. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11net: stmmac: Prevent divide-by-zeroJose Abreu
When RX Coalesce settings are set to all zero (which is a valid setting) we will currently get a divide-by-zero error. Fix it. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11net: sonic: replace dev_kfree_skb in sonic_send_packetMao Wenan
sonic_send_packet will be processed in irq or non-irq context, so it would better use dev_kfree_skb_any instead of dev_kfree_skb. Fixes: d9fb9f384292 ("*sonic/natsemi/ns83829: Move the National Semi-conductor drivers") Signed-off-by: Mao Wenan <maowenan@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11wimax: i2400: fix memory leakNavid Emamdoost
In i2400m_op_rfkill_sw_toggle cmd buffer should be released along with skb response. Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11Merge branch 'hns3-next'David S. Miller
Huazhong Tan says: ==================== net: hns3: add a feature & bugfixes & cleanups This patch-set includes a VF feature, bugfixes and cleanups for the HNS3 ethernet controller driver. [patch 01/07] adds ethtool_ops.set_channels support for HNS3 VF driver [patch 02/07] adds a recovery for setting channel fail. [patch 03/07] fixes an error related to shaper parameter algorithm. [patch 04/07] fixes an error related to ksetting. [patch 05/07] adds cleanups for some log pinting. [patch 06/07] adds a NULL pointer check before function calling. [patch 07/07] adds some debugging information for reset issue. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11net: hns3: add some DFX info for reset issueHuazhong Tan
This patch adds more information for reset DFX. Also, adds some cleanups to reset info, move reset_fail_cnt into struct hclge_rst_stats, and modifies some print formats. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11net: hns3: check NULL pointer before useGuangbin Huang
This patch checks ops->set_default_reset_request whether is NULL before using it in function hns3_slot_reset. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11net: hns3: modify some logs formatGuangbin Huang
The pfc_en and pfc_map need to be displayed in hexadecimal notation, printing dma address should use %pad, and the end of printed string needs to be add "\n". This patch modifies them. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11net: hns3: fix port setting handle for fibre portGuangbin Huang
For hardware doesn't support use specified speed and duplex to negotiate, it's unnecessary to check and modify the port speed and duplex for fibre port when autoneg is on. Fixes: 22f48e24a23d ("net: hns3: add autoneg and change speed support for fibre port") Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11net: hns3: fix shaper parameter algorithmYonglong Liu
Currently when hns3 driver configures the tm shaper to limit bandwidth below 20Mbit using the parameters calculated by hclge_shaper_para_calc(), the actual bandwidth limited by tm hardware module is not accurate enough, for example, 1.28 Mbit when the user is configuring 1 Mbit. This patch adjusts the ir_calc to be closer to ir, and always calculate the ir_b parameter when user is configuring a small bandwidth. Also, removes an unnecessary parenthesis when calculating denominator. Fixes: 848440544b41 ("net: hns3: Add support of TX Scheduler & Shaper to HNS3 driver") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11net: hns3: revert to old channel when setting new channel num failPeng Li
After setting new channel num, it needs free old ring memory and allocate new ring memory. If there is no enough memory and allocate new ring memory fail, the ring may initialize fail. To make sure the network interface can work normally, driver should revert the channel to the old configuration. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11net: hns3: add ethtool_ops.set_channels support for HNS3 VF driverGuangbin Huang
This patch adds ethtool_ops.set_channels support for HNS3 VF driver, and updates related TQP information and RSS information, to support modification of VF TQP number, and uses current rss_size instead of max_rss_size to initialize RSS. Also, fixes a format error in hclgevf_get_rss(). Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11mac80211_hwsim: Register support for HE meshpointSven Eckelmann
Some features of 802.11ax without central organizing (AP) STA can also be used in mesh mode. hwsim can be used to assist initial development of these features without having access to HW. Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Link: https://lore.kernel.org/r/20190813063657.7544-1-sven@narfation.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-09-11nl80211: Fix possible Spectre-v1 for CQM RSSI thresholdsMasashi Honma
commit 1222a1601488 ("nl80211: Fix possible Spectre-v1 for CQM RSSI thresholds") was incomplete and requires one more fix to prevent accessing to rssi_thresholds[n] because user can control rssi_thresholds[i] values to make i reach to n. For example, rssi_thresholds = {-400, -300, -200, -100} when last is -34. Cc: stable@vger.kernel.org Fixes: 1222a1601488 ("nl80211: Fix possible Spectre-v1 for CQM RSSI thresholds") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Masashi Honma <masashi.honma@gmail.com> Link: https://lore.kernel.org/r/20190908005653.17433-1-masashi.honma@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-09-11mac80211: allow drivers to set max MTUWen Gong
Make it possibly for drivers to adjust the default max_mtu by storing it in the hardware struct and using that value for all interfaces. Signed-off-by: Wen Gong <wgong@codeaurora.org> Link: https://lore.kernel.org/r/1567738137-31748-1-git-send-email-wgong@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-09-11cfg80211: Do not compare with boolean in nl80211_common_reg_change_eventzhong jiang
With the help of boolinit.cocci, we use !nl80211_reg_change_event_fill instead of (nl80211_reg_change_event_fill == false). Meanwhile, Clean up the code. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Link: https://lore.kernel.org/r/1567657537-65472-1-git-send-email-zhongjiang@huawei.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-09-11mac80211: IBSS: send deauth when expiring inactive STAsJohannes Berg
When we expire an inactive station, try to send it a deauth. This helps if it's actually still around, and just has issues with beacon distribution (or we do), and it will not also remove us. Then, if we have shared state, this may not be reset properly, causing problems; for example, we saw a case where aggregation sessions weren't removed properly (due to the TX start being offloaded to firmware and it relying on deauth for stop), causing a lot of traffic to get lost due to the SN reset after remove/add of the peer. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20190830112451.21655-9-luca@coelho.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-09-11mac80211: don't check if key is NULL in ieee80211_key_link()Luca Coelho
We already assume that key is not NULL and dereference it in a few other places before we check whether it is NULL, so the check is unnecessary. Remove it. Fixes: 96fc6efb9ad9 ("mac80211: IEEE 802.11 Extended Key ID support") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20190830112451.21655-8-luca@coelho.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-09-11mac80211: clear crypto tx tailroom counter upon keys enableLior Cohen
In case we got a fw restart while roaming from encrypted AP to non-encrypted one, we might end up with hitting a warning on the pending counter crypto_tx_tailroom_pending_dec having a non-zero value. The following comment taken from net/mac80211/key.c explains the rational for the delayed tailroom needed: /* * The reason for the delayed tailroom needed decrementing is to * make roaming faster: during roaming, all keys are first deleted * and then new keys are installed. The first new key causes the * crypto_tx_tailroom_needed_cnt to go from 0 to 1, which invokes * the cost of synchronize_net() (which can be slow). Avoid this * by deferring the crypto_tx_tailroom_needed_cnt decrementing on * key removal for a while, so if we roam the value is larger than * zero and no 0->1 transition happens. * * The cost is that if the AP switching was from an AP with keys * to one without, we still allocate tailroom while it would no * longer be needed. However, in the typical (fast) roaming case * within an ESS this usually won't happen. */ The next flow lead to the warning eventually reported as a bug: 1. Disconnect from encrypted AP 2. Set crypto_tx_tailroom_pending_dec = 1 for the key 3. Schedule work 4. Reconnect to non-encrypted AP 5. Add a new key, setting the tailroom counter = 1 6. Got FW restart while pending counter is set ---> hit the warning While on it, the ieee80211_reset_crypto_tx_tailroom() func was merged into its single caller ieee80211_reenable_keys (previously called ieee80211_enable_keys). Also, we reset the crypto_tx_tailroom_pending_dec and remove the counters warning as we just reset both. Signed-off-by: Lior Cohen <lior2.cohen@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20190830112451.21655-7-luca@coelho.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-09-11mac80211: remove unnecessary key conditionJohannes Berg
When we reach this point, the key cannot be NULL. Remove the condition that suggests otherwise. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20190830112451.21655-6-luca@coelho.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-09-11mac80211: list features in WEP/TKIP disable in better orderJohannes Berg
"HE/HT/VHT" is a bit confusing since really the order of development (and possible support) is different - change this to "HT/VHT/HE". Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20190830112451.21655-4-luca@coelho.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-09-11cfg80211: always shut down on HW rfkillJohannes Berg
When the RFKILL subsystem isn't available, then rfkill_blocked() always returns false. In the case of hardware rfkill this will be wrong though, as if the hardware reported being killed then it cannot operate any longer. Since we only ever call the rfkill_sync work in this case, just rename it to rfkill_block and always pass "true" for the blocked parameter, rather than passing rfkill_blocked(). We rely on the underlying driver to still reject any new attempt to bring up the device by itself. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20190830112451.21655-2-luca@coelho.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-09-11mac80211: vht: add support VHT EXT NSS BW in parsing VHTMordechay Goodstein
This fixes was missed in parsing the vht capabilities max bw support. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Fixes: e80d642552a3 ("mac80211: copy VHT EXT NSS BW Support/Capable data to station") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20190830114057.22197-1-luca@coelho.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-09-11cfg80211: fix boundary value in ieee80211_frequency_to_channel()Arend van Spriel
The boundary value used for the 6G band was incorrect as it would result in invalid 6G channel number for certain frequencies. Reported-by: Amar Singhal <asinghal@codeaurora.org> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Link: https://lore.kernel.org/r/1567510772-24263-1-git-send-email-arend.vanspriel@broadcom.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-09-10scsi: hisi_sas: Fix the conflict between device gone and host resetXiang Chen
When device gone, it will check whether it is during reset, if not, it will send internal task abort. Before internal task abort returned, reset begins, and it will check whether SAS_PHY_UNUSED is set, if not, it will call hisi_sas_init_device(), but at that time domain_device may already be freed or part of it is freed, so it may referenece null pointer in hisi_sas_init_device(). It may occur as follows: thread0 thread1 hisi_sas_dev_gone() check whether in RESET(no) internal task abort reset prep soft_reset ... (part of reset_done) internal task abort failed release resource anyway clear_itct device->lldd_dev=NULL hisi_sas_reset_init_all_device check sas_dev->dev_type is SAS_PHY_UNUSED and !device set dev_type SAS_PHY_UNUSED sas_free_device hisi_sas_init_device ... Semaphore hisi_hba.sema is used to sync the processes of device gone and host reset. To solve the issue, expand the scope that semaphore protects and let them never occur together. And also some places will check whether domain_device is NULL to judge whether the device is gone. So when device gone, need to clear sas_dev->sas_device. Link: https://lore.kernel.org/r/1567774537-20003-14-git-send-email-john.garry@huawei.com Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-09-10scsi: hisi_sas: Add BIST support for phy loopbackXiang Chen
Add BIST (built in self test) support for phy loopback. Through the new debugfs interface, the user can configure loopback mode/linkrate/phy id/code mode before enabling it. And also user can enable/disable BIST function. Link: https://lore.kernel.org/r/1567774537-20003-13-git-send-email-john.garry@huawei.com Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-09-10scsi: hisi_sas: Add hisi_sas_debugfs_alloc() to centralise allocationLuo Jiaxing
We extract the code of memory allocate and construct an new function for it. We think it's convenient for subsequent optimization. Link: https://lore.kernel.org/r/1567774537-20003-12-git-send-email-john.garry@huawei.com Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-09-10scsi: hisi_sas: Remove some unused function argumentsLuo Jiaxing
Some function arguments are unused, so remove them. Also move the timeout print in for wait_cmds_complete_timeout_vX_hw() callsites into that same function. Link: https://lore.kernel.org/r/1567774537-20003-11-git-send-email-john.garry@huawei.com Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-09-10scsi: hisi_sas: Remove redundant work declarationXiang Chen
Remove redundant work declaration in HISI_SAS_DECLARE_RST_WORK_ON_STACK Link: https://lore.kernel.org/r/1567774537-20003-10-git-send-email-john.garry@huawei.com Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-09-10scsi: hisi_sas: Remove hisi_sas_hw.slot_completeLuo Jiaxing
We never call hisi_sas_hw.slot_complete, so remove it. Link: https://lore.kernel.org/r/1567774537-20003-9-git-send-email-john.garry@huawei.com Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-09-10scsi: hisi_sas: Assign NCQ tag for all NCQ commandsXiang Chen
Currently the NCQ tag is only assigned for FPDMA READ and FPDMA WRITE commands, and for other NCQ commands (such as FPDMA SEND), their NCQ tags are set in the delivery command to 0. So for all the NCQ commands, we also need to assign normal NCQ tag for them, so drop the command type check in hisi_sas_get_ncq_tag() [drop hisi_sas_get_ncq_tag() altogether actually], and always use the ATA command NCQ tag when appropriate. Link: https://lore.kernel.org/r/1567774537-20003-8-git-send-email-john.garry@huawei.com Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-09-10scsi: hisi_sas: Update all the registers after suspend and resumeXiang Chen
After suspend and resume, the HW registers will be set back to their initial value. We use init_reg_v3_hw() to set some registers, but some registers are set via firmware in ACPI "_RST" method, so add reset handler before init_reg_v3_hw(). Link: https://lore.kernel.org/r/1567774537-20003-7-git-send-email-john.garry@huawei.com Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-09-10scsi: hisi_sas: Retry 3 times TMF IO for SAS disks when init deviceXiang Chen
When init device for SAS disks, it will send TMF IO to clear disks. At that time TMF IO is broken by some operations such as injecting controller reset from HW RAs event, the TMF IO will be timeout, and at last device will be gone. Print is as followed: hisi_sas_v3_hw 0000:74:02.0: dev[240:1] found ... hisi_sas_v3_hw 0000:74:02.0: controller resetting... hisi_sas_v3_hw 0000:74:02.0: phyup: phy7 link_rate=10(sata) hisi_sas_v3_hw 0000:74:02.0: phyup: phy0 link_rate=9(sata) hisi_sas_v3_hw 0000:74:02.0: phyup: phy1 link_rate=9(sata) hisi_sas_v3_hw 0000:74:02.0: phyup: phy2 link_rate=9(sata) hisi_sas_v3_hw 0000:74:02.0: phyup: phy3 link_rate=9(sata) hisi_sas_v3_hw 0000:74:02.0: phyup: phy6 link_rate=10(sata) hisi_sas_v3_hw 0000:74:02.0: phyup: phy5 link_rate=11 hisi_sas_v3_hw 0000:74:02.0: phyup: phy4 link_rate=11 hisi_sas_v3_hw 0000:74:02.0: controller reset complete hisi_sas_v3_hw 0000:74:02.0: abort tmf: TMF task timeout and not done hisi_sas_v3_hw 0000:74:02.0: dev[240:1] is gone sas: driver on host 0000:74:02.0 cannot handle device 5000c500a75a860d, error:5 To improve the reliability, retry TMF IO max of 3 times for SAS disks which is the same as softreset does. Link: https://lore.kernel.org/r/1567774537-20003-6-git-send-email-john.garry@huawei.com Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-09-10scsi: hisi_sas: Remove sleep after issue phy reset if sas_smp_phy_control() ↵Luo Jiaxing
fails At expander environment, we delay after issue phy reset to wait for hardware to handle phy reset. But if sas_smp_phy_control() fails, the delay is unnecessary so remove it. Link: https://lore.kernel.org/r/1567774537-20003-5-git-send-email-john.garry@huawei.com Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-09-10scsi: hisi_sas: Directly return when running I_T_nexus reset if phy disabledLuo Jiaxing
At hisi_sas_debug_I_T_nexus_reset(), we call sas_phy_reset() to reset a phy. But if the phy is disabled, sas_phy_reset() will directly return -ENODEV without issue a phy reset request. If so, We can directly return -ENODEV to libsas before issue a phy reset. Link: https://lore.kernel.org/r/1567774537-20003-4-git-send-email-john.garry@huawei.com Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-09-10scsi: hisi_sas: Use true/false as input parameter of sas_phy_reset()Luo Jiaxing
When calling sas_phy_reset(), we need to specify whether the reset type is hard reset or link reset - use true/false for clarity. Link: https://lore.kernel.org/r/1567774537-20003-3-git-send-email-john.garry@huawei.com Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-09-10scsi: hisi_sas: add debugfs auto-trigger for internal abort time outLuo Jiaxing
This trigger is add at _hisi_sas_internal_task_abort() Link: https://lore.kernel.org/r/1567774537-20003-2-git-send-email-john.garry@huawei.com Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-09-10scsi: virtio_scsi: unplug LUNs when events missedMatt Lupfer
The event handler calls scsi_scan_host() when events are missed, which will hotplug new LUNs. However, this function won't remove any unplugged LUNs. The result is that hotunplug doesn't work properly when the number of unplugged LUNs exceeds the event queue size (currently 8). Scan existing LUNs when events are missed to check if they are still present. If not, remove them. Link: https://lore.kernel.org/r/20190905181903.29756-1-mlupfer@ddn.com Signed-off-by: Matt Lupfer <mlupfer@ddn.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-09-10scsi: scsi_dh_rdac: zero cdb in send_mode_select()Martin Wilck
cdb in send_mode_select() is not zeroed and is only partially filled in rdac_failover_get(), which leads to some random data getting to the device. Users have reported storage responding to such commands with INVALID FIELD IN CDB. Code before commit 327825574132 was not affected, as it called blk_rq_set_block_pc(). Fix this by zeroing out the cdb first. Identified & fix proposed by HPE. Fixes: 327825574132 ("scsi_dh_rdac: switch to scsi_execute_req_flags()") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20190904155205.1666-1-martin.wilck@suse.com Signed-off-by: Martin Wilck <mwilck@suse.com> Acked-by: Ales Novak <alnovak@suse.cz> Reviewed-by: Shane Seymour <shane.seymour@hpe.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit (git 2.34.1) at 2025-09-23 20:31:36 +0000