summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-01-07usb: gadget: remove unused variable in gr_queue_int()Wei Yongjun
The variable 'dev' is initialized but never used otherwise, so remove the unused variable. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-07usb: gadget: s3c-hsotg: remove duplicated include from s3c-hsotg.cWei Yongjun
Remove duplicated include. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-07USB: ftdi_sio: added CS5 quirk for broken smartcard readersColin Leitner
Genuine FTDI chips support only CS7/8. A previous fix in commit 8704211f65a2 ("USB: ftdi_sio: fixed handling of unsupported CSIZE setting") enforced this limitation and reported it back to userspace. However, certain types of smartcard readers depend on specific driver behaviour that requests 0 data bits (not 5) to change into a different operating mode if CS5 has been set. This patch reenables this behaviour for all FTDI devices. Tagged to be added to stable, because it affects a lot of users of embedded systems which rely on these readers to work properly. Cc: stable <stable@vger.kernel.org> Reported-by: Heinrich Siebmanns <H.Siebmanns@t-online.de> Tested-by: Heinrich Siebmanns <H.Siebmanns@t-online.de> Signed-off-by: Colin Leitner <colin.leitner@gmail.com> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-07usb: chipidea: imx: set CI_HDRC_IMX28_WRITE_FIX for imx28Peter Chen
Due to imx28 needs ARM swp instruction for writing, we set CI_HDRC_IMX28_WRITE_FIX for imx28. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Tested-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-07usb: doc: rename ci13xxx-imx.txt to ci-hdrc-imx.txtPeter Chen
We have already renamed the file name, change doc name at this patch. Cc: devicetree@vger.kernel.org Cc: linux-doc@vger.kernel.org Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-07usb: chipidea: mark register map as "const" and convert to u8Marc Kleine-Budde
This patch makes the controller register map ci_regs_nolpm and ci_regs_lpm as "const". Further, as all offset fit into a single byte, the type is changed from uintptr_t to u8. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-07usb: chipidea: move malloced regmap directly into struct hw_bankMarc Kleine-Budde
Without this patch a seperate chunk of memory is allocated for the regmap array. As the regmap is always used it makes no sense to allocate a seperate memory block for it, this patch moves the regmap array directly into the struct hw_bank. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-07USB: wusbcore: fix up coding style issues in wa-nep.cRahul Bedarkar
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-07USB: wusbcore: fix up coding style issues in wa-rpipe.cRahul Bedarkar
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-07USB: wusbcore: fix up coding style issues in wusbhc.c and wusbhc.hRahul Bedarkar
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-07USB: wusbcore: fix up line break coding style issues in mmc.cRahul Bedarkar
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-07USB: wusbcore: fix up line break coding style issues in security.cRahul Bedarkar
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-07USB: wusbcore: fix up line break coding style issues in wa-hc.hRahul Bedarkar
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-07USB: wusbcore: fix up minor coding style issues in cbaf.cRahul Bedarkar
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-07USB: wusbcore: correct spelling mistakes in comments and error stringRahul Bedarkar
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-07USB: core: correct spelling mistakes in comments and warningRahul Bedarkar
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-07Watchdog: pcwd_usb: remove CONFIG_USB_DEBUG usageGreg Kroah-Hartman
CONFIG_USB_DEBUG is going away, and all of the other USB drivers no longer rely on "debug" module parameters for debugging lines, so move the pcwd_usb driver to use the dynamic debug infrastructure to be more in line with the rest of the kernel. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Wim Van Sebroeck <wim@iguana.be> Reviewed-by: Guenter Roeck <linux@roeck-us.net>
2014-01-07USB: c67x00: move URB private data allocation from under spinlockMax Filippov
This fixes the following warning: BUG: sleeping function called from invalid context at mm/slub.c:940 in_atomic(): 1, irqs_disabled(): 1, pid: 17, name: khubd CPU: 0 PID: 17 Comm: khubd Not tainted 3.12.0-00004-g938dd60-dirty #1 __might_sleep+0xbe/0xc0 kmem_cache_alloc_trace+0x36/0x170 c67x00_urb_enqueue+0x5c/0x254 usb_hcd_submit_urb+0x66e/0x724 usb_submit_urb+0x2ac/0x308 usb_start_wait_urb+0x2c/0xb8 usb_control_msg+0x8c/0xa8 hub_port_init+0x191/0x718 hub_thread+0x804/0xe14 kthread+0x72/0x78 ret_from_kernel_thread+0x8/0xc Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: Peter Korsgaard <peter@korsgaard.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-07USB: c67x00: add proper delays to HPI read/writeMax Filippov
According to CY7C67300 specification HPI read and write cycle duration Tcyc must be at least 6T long, where T is 1/48MHz, which is 125ns. Without this delay fast host processor cannot write to chip registers. Add proper ndelay to hpi_{read,write}_reg. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: Peter Korsgaard <peter@korsgaard.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-07Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller
Pablo Neira Ayuso says: ==================== The following patchset contains two patches: * fix the IRC NAT helper which was broken when adding (incomplete) IPv6 support, from Daniel Borkmann. * Refine the previous bugtrap that Jesper added to catch problems for the usage of the sequence adjustment extension in IPVs in Dec 16th, it may spam messages in case of finding a real bug. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-07tipc: correctly unlink packets from deferred packet queueErik Hugne
When we pull a received packet from a link's 'deferred packets' queue for processing, its 'next' pointer is not cleared, and still refers to the next packet in that queue, if any. This is incorrect, but caused no harm before commit 40ba3cdf542a469aaa9083fa041656e59b109b90 ("tipc: message reassembly using fragment chain") was introduced. After that commit, it may sometimes lead to the following oops: general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC Modules linked in: tipc CPU: 4 PID: 0 Comm: swapper/4 Tainted: G W 3.13.0-rc2+ #6 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007 task: ffff880017af4880 ti: ffff880017aee000 task.ti: ffff880017aee000 RIP: 0010:[<ffffffff81710694>] [<ffffffff81710694>] skb_try_coalesce+0x44/0x3d0 RSP: 0018:ffff880016603a78 EFLAGS: 00010212 RAX: 6b6b6b6bd6d6d6d6 RBX: ffff880013106ac0 RCX: ffff880016603ad0 RDX: ffff880016603ad7 RSI: ffff88001223ed00 RDI: ffff880013106ac0 RBP: ffff880016603ab8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: ffff88001223ed00 R13: ffff880016603ad0 R14: 000000000000058c R15: ffff880012297650 FS: 0000000000000000(0000) GS:ffff880016600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 000000000805b000 CR3: 0000000011f5d000 CR4: 00000000000006e0 Stack: ffff880016603a88 ffffffff810a38ed ffff880016603aa8 ffff88001223ed00 0000000000000001 ffff880012297648 ffff880016603b68 ffff880012297650 ffff880016603b08 ffffffffa0006c51 ffff880016603b08 00ffffffa00005fc Call Trace: <IRQ> [<ffffffff810a38ed>] ? trace_hardirqs_on+0xd/0x10 [<ffffffffa0006c51>] tipc_link_recv_fragment+0xd1/0x1b0 [tipc] [<ffffffffa0007214>] tipc_recv_msg+0x4e4/0x920 [tipc] [<ffffffffa00016f0>] ? tipc_l2_rcv_msg+0x40/0x250 [tipc] [<ffffffffa000177c>] tipc_l2_rcv_msg+0xcc/0x250 [tipc] [<ffffffffa00016f0>] ? tipc_l2_rcv_msg+0x40/0x250 [tipc] [<ffffffff8171e65b>] __netif_receive_skb_core+0x80b/0xd00 [<ffffffff8171df94>] ? __netif_receive_skb_core+0x144/0xd00 [<ffffffff8171eb76>] __netif_receive_skb+0x26/0x70 [<ffffffff8171ed6d>] netif_receive_skb+0x2d/0x200 [<ffffffff8171fe70>] napi_gro_receive+0xb0/0x130 [<ffffffff815647c2>] e1000_clean_rx_irq+0x2c2/0x530 [<ffffffff81565986>] e1000_clean+0x266/0x9c0 [<ffffffff81985f7b>] ? notifier_call_chain+0x2b/0x160 [<ffffffff8171f971>] net_rx_action+0x141/0x310 [<ffffffff81051c1b>] __do_softirq+0xeb/0x480 [<ffffffff819817bb>] ? _raw_spin_unlock+0x2b/0x40 [<ffffffff810b8c42>] ? handle_fasteoi_irq+0x72/0x100 [<ffffffff81052346>] irq_exit+0x96/0xc0 [<ffffffff8198cbc3>] do_IRQ+0x63/0xe0 [<ffffffff81981def>] common_interrupt+0x6f/0x6f <EOI> This happens when the last fragment of a message has passed through the the receiving link's 'deferred packets' queue, and at least one other packet was added to that queue while it was there. After the fragment chain with the complete message has been successfully delivered to the receiving socket, it is released. Since 'next' pointer of the last fragment in the released chain now is non-NULL, we get the crash shown above. We fix this by clearing the 'next' pointer of all received packets, including those being pulled from the 'deferred' queue, before they undergo any further processing. Fixes: 40ba3cdf542a4 ("tipc: message reassembly using fragment chain") Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Reported-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-07ipv6: pcpu_tstats.syncp should be initialised in ip6_vti.cLi RongQing
initialise pcpu_tstats.syncp to kill the calltrace [ 11.973950] Call Trace: [ 11.973950] [<819bbaff>] dump_stack+0x48/0x60 [ 11.973950] [<819bbaff>] dump_stack+0x48/0x60 [ 11.973950] [<81078dcf>] __lock_acquire.isra.22+0x1bf/0xc10 [ 11.973950] [<81078dcf>] __lock_acquire.isra.22+0x1bf/0xc10 [ 11.973950] [<81079fa7>] lock_acquire+0x77/0xa0 [ 11.973950] [<81079fa7>] lock_acquire+0x77/0xa0 [ 11.973950] [<817ca7ab>] ? dev_get_stats+0xcb/0x130 [ 11.973950] [<817ca7ab>] ? dev_get_stats+0xcb/0x130 [ 11.973950] [<8183862d>] ip_tunnel_get_stats64+0x6d/0x230 [ 11.973950] [<8183862d>] ip_tunnel_get_stats64+0x6d/0x230 [ 11.973950] [<817ca7ab>] ? dev_get_stats+0xcb/0x130 [ 11.973950] [<817ca7ab>] ? dev_get_stats+0xcb/0x130 [ 11.973950] [<811cf8c1>] ? __nla_reserve+0x21/0xd0 [ 11.973950] [<811cf8c1>] ? __nla_reserve+0x21/0xd0 [ 11.973950] [<817ca7ab>] dev_get_stats+0xcb/0x130 [ 11.973950] [<817ca7ab>] dev_get_stats+0xcb/0x130 [ 11.973950] [<817d5409>] rtnl_fill_ifinfo+0x569/0xe20 [ 11.973950] [<817d5409>] rtnl_fill_ifinfo+0x569/0xe20 [ 11.973950] [<810352e0>] ? kvm_clock_read+0x20/0x30 [ 11.973950] [<810352e0>] ? kvm_clock_read+0x20/0x30 [ 11.973950] [<81008e38>] ? sched_clock+0x8/0x10 [ 11.973950] [<81008e38>] ? sched_clock+0x8/0x10 [ 11.973950] [<8106ba45>] ? sched_clock_local+0x25/0x170 [ 11.973950] [<8106ba45>] ? sched_clock_local+0x25/0x170 [ 11.973950] [<810da6bd>] ? __kmalloc+0x3d/0x90 [ 11.973950] [<810da6bd>] ? __kmalloc+0x3d/0x90 [ 11.973950] [<817b8c10>] ? __kmalloc_reserve.isra.41+0x20/0x70 [ 11.973950] [<817b8c10>] ? __kmalloc_reserve.isra.41+0x20/0x70 [ 11.973950] [<810da81a>] ? slob_alloc_node+0x2a/0x60 [ 11.973950] [<810da81a>] ? slob_alloc_node+0x2a/0x60 [ 11.973950] [<817b919a>] ? __alloc_skb+0x6a/0x2b0 [ 11.973950] [<817b919a>] ? __alloc_skb+0x6a/0x2b0 [ 11.973950] [<817d8795>] rtmsg_ifinfo+0x65/0xe0 [ 11.973950] [<817d8795>] rtmsg_ifinfo+0x65/0xe0 [ 11.973950] [<817cbd31>] register_netdevice+0x531/0x5a0 [ 11.973950] [<817cbd31>] register_netdevice+0x531/0x5a0 [ 11.973950] [<81892b87>] ? ip6_tnl_get_cap+0x27/0x90 [ 11.973950] [<81892b87>] ? ip6_tnl_get_cap+0x27/0x90 [ 11.973950] [<817cbdb6>] register_netdev+0x16/0x30 [ 11.973950] [<817cbdb6>] register_netdev+0x16/0x30 [ 11.973950] [<81f574a6>] vti6_init_net+0x1c4/0x1d4 [ 11.973950] [<81f574a6>] vti6_init_net+0x1c4/0x1d4 [ 11.973950] [<81f573af>] ? vti6_init_net+0xcd/0x1d4 [ 11.973950] [<81f573af>] ? vti6_init_net+0xcd/0x1d4 [ 11.973950] [<817c16df>] ops_init.constprop.11+0x17f/0x1c0 [ 11.973950] [<817c16df>] ops_init.constprop.11+0x17f/0x1c0 [ 11.973950] [<817c1779>] register_pernet_operations.isra.9+0x59/0x90 [ 11.973950] [<817c1779>] register_pernet_operations.isra.9+0x59/0x90 [ 11.973950] [<817c18d1>] register_pernet_device+0x21/0x60 [ 11.973950] [<817c18d1>] register_pernet_device+0x21/0x60 [ 11.973950] [<81f574b6>] ? vti6_init_net+0x1d4/0x1d4 [ 11.973950] [<81f574b6>] ? vti6_init_net+0x1d4/0x1d4 [ 11.973950] [<81f574c7>] vti6_tunnel_init+0x11/0x68 [ 11.973950] [<81f574c7>] vti6_tunnel_init+0x11/0x68 [ 11.973950] [<81f572a1>] ? mip6_init+0x73/0xb4 [ 11.973950] [<81f572a1>] ? mip6_init+0x73/0xb4 [ 11.973950] [<81f0cba4>] do_one_initcall+0xbb/0x15b [ 11.973950] [<81f0cba4>] do_one_initcall+0xbb/0x15b [ 11.973950] [<811a00d8>] ? sha_transform+0x528/0x1150 [ 11.973950] [<811a00d8>] ? sha_transform+0x528/0x1150 [ 11.973950] [<81f0c544>] ? repair_env_string+0x12/0x51 [ 11.973950] [<81f0c544>] ? repair_env_string+0x12/0x51 [ 11.973950] [<8105c30d>] ? parse_args+0x2ad/0x440 [ 11.973950] [<8105c30d>] ? parse_args+0x2ad/0x440 [ 11.973950] [<810546be>] ? __usermodehelper_set_disable_depth+0x3e/0x50 [ 11.973950] [<810546be>] ? __usermodehelper_set_disable_depth+0x3e/0x50 [ 11.973950] [<81f0cd27>] kernel_init_freeable+0xe3/0x182 [ 11.973950] [<81f0cd27>] kernel_init_freeable+0xe3/0x182 [ 11.973950] [<81f0c532>] ? do_early_param+0x7a/0x7a [ 11.973950] [<81f0c532>] ? do_early_param+0x7a/0x7a [ 11.973950] [<819b5b1b>] kernel_init+0xb/0x100 [ 11.973950] [<819b5b1b>] kernel_init+0xb/0x100 [ 11.973950] [<819cebf7>] ret_from_kernel_thread+0x1b/0x28 [ 11.973950] [<819cebf7>] ret_from_kernel_thread+0x1b/0x28 [ 11.973950] [<819b5b10>] ? rest_init+0xc0/0xc0 [ 11.973950] [<819b5b10>] ? rest_init+0xc0/0xc0 Before 469bdcefdc ("ipv6: fix the use of pcpu_tstats in ip6_vti.c"), the pcpu_tstats.syncp is not used to pretect the 64bit elements of pcpu_tstats, so not appear this calltrace. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-07gpio: f7188x: set can_sleep attributeSimon Guinot
Since request_muxed_region() is used to synchronize access on the Super-I/O controller, then the can_sleep attribute must be set for the f7188x GPIO chips. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-07gpio: samsung: Update documentationSachin Kamat
hardware.h inclusion is no longer needed. Update the documentation section related to it and fix a file path. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-07gpio: samsung: Remove hardware.h inclusionSachin Kamat
The contents of this header file are not referenced in the driver. Remove its inclusion. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-07gpio: xtensa: depend on HAVE_XTENSA_GPIO32Baruch Siach
Prevent build failure when the selected variant does not support GPIO32. Acked-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-07ASoC: dpcm: Explicitly set BE DAI link supported stream directionsLiam Girdwood
Some BE DAIs can be "dummy" (when the DSP is controlling the DAI) and as such wont have set a minimum number of playback or capture channels required for BE DAI registration (to establish supported stream directions). Force machine drivers to explicitly set whether they support playback and capture stream directions for every BE DAIs. Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-07ASoC: docs: Update the Overview documentLiam Girdwood
Update the ASoC overview to bring it up to date with the current code base and include multi-component. Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-07gpio: clps711x: Enable driver compilation with COMPILE_TESTAlexander Shiyan
This helps increasing build testing coverage. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-07Revert "ARM: 7908/1: mm: Fix the arm_dma_limit calculation"Russell King
This reverts commit 787b0d5c1ca7ff24feb6f92e4c7f4410ee7d81a8 since it is no longer required after 7909/1 was applied, and it causes build regressions when ARM_PATCH_PHYS_VIRT is disabled and DMA_ZONE is enabled. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-01-07gpio: clps711x: Use of_match_ptr()Alexander Shiyan
There is no reason to keep the OF data if the driver was compiled without DT support. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-07net: rfkill: gpio: convert to descriptor-based GPIO interfaceHeikki Krogerus
Convert to the safer gpiod_* family of API functions. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Stephen Warren <swarren@nvidia.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-07leds: s3c24xx: Fix build failureTushar Behera
Commit c67d0f29262b ("ARM: s3c24xx: get rid of custom <mach/gpio.h>") removed the usage of mach/gpio.h file, but we need to include> plat/gpio-cfg.h to avoid following build error. Fixes following build error. drivers/leds/leds-s3c24xx.c: In function ‘s3c24xx_led_probe’: drivers/leds/leds-s3c24xx.c:100:2: error: implicit declaration of function ‘s3c_gpio_setpull’ [-Werror=implicit-function-declaration] Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Bryan Wu <cooloney@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-07ALSA: compress: add num_sample_rates in snd_codec_descVinod Koul
this gives ability to convey the valid values of supported rates in sample_rates array Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-01-07USB: fix race between hub_disconnect and recursively_mark_NOTATTACHEDAlan Stern
There is a race in the hub driver between hub_disconnect() and recursively_mark_NOTATTACHED(). This race can be triggered if the driver is unbound from a device at the same time as the bus's root hub is removed. When the race occurs, it can cause an oops: BUG: unable to handle kernel NULL pointer dereference at 0000015c IP: [<c16d5fb0>] recursively_mark_NOTATTACHED+0x20/0x60 Call Trace: [<c16d5fc4>] recursively_mark_NOTATTACHED+0x34/0x60 [<c16d5fc4>] recursively_mark_NOTATTACHED+0x34/0x60 [<c16d5fc4>] recursively_mark_NOTATTACHED+0x34/0x60 [<c16d5fc4>] recursively_mark_NOTATTACHED+0x34/0x60 [<c16d6082>] usb_set_device_state+0x92/0x120 [<c16d862b>] usb_disconnect+0x2b/0x1a0 [<c16dd4c0>] usb_remove_hcd+0xb0/0x160 [<c19ca846>] ? _raw_spin_unlock_irqrestore+0x26/0x50 [<c1704efc>] ehci_mid_remove+0x1c/0x30 [<c1704f26>] ehci_mid_stop_host+0x16/0x30 [<c16f7698>] penwell_otg_work+0xd28/0x3520 [<c19c945b>] ? __schedule+0x39b/0x7f0 [<c19cdb9d>] ? sub_preempt_count+0x3d/0x50 [<c125e97d>] process_one_work+0x11d/0x3d0 [<c19c7f4d>] ? mutex_unlock+0xd/0x10 [<c125e0e5>] ? manage_workers.isra.24+0x1b5/0x270 [<c125f009>] worker_thread+0xf9/0x320 [<c19ca846>] ? _raw_spin_unlock_irqrestore+0x26/0x50 [<c125ef10>] ? rescuer_thread+0x2b0/0x2b0 [<c1264ac4>] kthread+0x94/0xa0 [<c19d0f77>] ret_from_kernel_thread+0x1b/0x28 [<c1264a30>] ? kthread_create_on_node+0xc0/0xc0 One problem is that recursively_mark_NOTATTACHED() uses the intfdata value and hub->hdev->maxchild while hub_disconnect() is clearing them. Another problem is that it uses hub->ports[i] while the port device is being released. To fix this race, we need to hold the device_state_lock while hub_disconnect() changes the values. (Note that usb_disconnect() and hub_port_connect_change() already acquire this lock at similar critical times during a USB device's life cycle.) We also need to remove the port devices after maxchild has been set to 0, instead of before. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: "Du, Changbin" <changbinx.du@intel.com> Tested-by: "Du, Changbin" <changbinx.du@intel.com> CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-07USB: fix: ohci-at91 mismerge build errorArnd Bergmann
After commit 99f14bd4d1 "Merge 3.13-rc5 into usb-next" (in linux-next as of today), I'm getting this error building any at91 kernel: drivers/usb/host/ohci-at91.c: In function 'usb_hcd_at91_probe': drivers/usb/host/ohci-at91.c:190:4: error: label 'err' used but not defined goto err; ^ drivers/usb/host/ohci-at91.c: At top level: drivers/usb/host/ohci-at91.c:206:2: warning: data definition has no type or storage class [enabled by default] at91_stop_hc(pdev); ^ ... The problem is obviously a mismerge between two unrelated changes that resulted in missing opening braces. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Boris BREZILLON <b.brezillon@overkiz.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-07ASoC: pcm: Fix lack of platform bespoke_trigger() callJean-Francois Moine
When the platform driver has no ops, the platform function bespoke_trigger() is no more called. The problem was introduced by the commit c5914b0aaea6494aaa9e415cbd32f8b7eb604af0 "ASoC: pcm: Check for ops before deferencing them" Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-07pinctrl: sh-pfc: r8a7791: Add I2C pinsValentine Barshak
This adds I2C[0-4] pinmux support to R8A7791 SoC. Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-07pinctrl: sh-pfc: r8a7791: Add VIN pinsValentine Barshak
This adds VIN[0-2] pinmux support to r8a7791 SoC. VIN1 B mirror is also added along with the primary configuration since it's the only one that provides access to all 24 data bits on VIN1. Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-07pinctrl: sh-pfc: r8a7791: Group USB PWEN and OVC pins togetherValentine Barshak
This groups USB PWEN and OVC pins together on R8A7791 SoC, the same way it's done on R8A7790, since both are needed for a USB device. Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-07pinctrl: sh-pfc: r8a7790: Fix vsync value in the vin3_sync_mux arrayValentine Barshak
This fixes a typo in the vin3_sync_mux array (s/VI2/VI3/). Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-07ASoC: simple-card: keep the property's name the same patternXiubo Li
Even though we might not have rigor rule for the simple card property names, according to the existing ones, they are all in a same pattern: [simple-audio-card,]XXX; Rename simple-audio-routing to simple-audio-card,routing, and make the simple card's properties has one unified name. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-07ASoC: simple-card: fix the DAPM routes map parsingXiubo Li
The simple-card's DAPM route maping is optional. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-07ASoC: ux500: Dramatically reduce the size of the DAI driver data structLee Jones
We no longer have a means to differentiate between MSP devices at probe time, mainly because we don't really have to. So rather than have an over- sized static data structure in place, where the only difference between devices is the ID and name (which are unused), we'll just create one succinct, statically assigned and shared one instead. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-07ASoC: ux500_pcm: Differentiate between pdata and DT initialisationLee Jones
If booting with full DT support (i.e. DMA too, the last piece of the puzzle), then we don't need to use the compatible_request_channel call back or require some of the historical bumph which probably isn't required by a platform data start-up now either. This will also be ripped out in upcoming commits. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-07ASoC: ux500_pcm: Take out pointless dev_dbg() callLee Jones
Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-07ASoC: ux500: Store DMA data in the DAI differently in the pdata and DT caseLee Jones
In this patch we do two things. Firstly, instead of open coding the store of DMA data in to the DAI for later use, we use the API provided. Secondly we create and store similar DMA data for the DT case, only this time we use 'struct snd_dmaengine_dai_dma_data' which is provided by the core for this very reason. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-07ASoC: ux500_pcm: Extend Device Tree support to deal with DMA dataLee Jones
Soon we will strip out pdata support from the Ux500 set of ASoC drivers. When this happens it will have to supply a DMA slave_config to the dmaengine. At the moment a great deal of this comes from pdata via AUXDATA. We need to become independent of this soon. This patch starts the process by allocating memory for the associated data structures and fetches the MSP id used for const struct indexing. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-07ASoC: ux500_pcm: Expect different saved DMA data when obtaining from DAI storeLee Jones
In preparation for full Device Tree enablement we must differentiate between the two varying ways DMA data can be held in the DAI store. If we're booting with Device Tree the provided 'snd_dmaengine_dai_dma_data' data structure shall be used, whereas in order to avoid breaking legacy platform data we also need to be able to translate DMA data stored using the UX500 specific 'ux500_msp_dma_params' method. Once we move over to solely use Device Tree, we can enforce the use of 'snd_dmaengine_dai_dma_data' and this code can be removed altogether. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-07ASoC: ux500_pcm: Stop pretending that we support varying address widthsLee Jones
The Slave Config's addr_width attribute is populated by data_width of dma_cfg, which in turn is derived from dma_params' data_size attribute and that comes from the slot_width which is always 16 bits (2 Bytes). We're cutting out the middle man here and just setting the DMA Slave Config directly. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
generated by cgit (git 2.34.1) at 2025-09-18 22:59:58 +0000