summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-12-23drm/radeon: Bump version for CIK DCE tiling fixAlex Deucher
Note when CIK DCE tiling was fixed. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-12-23drm/radeon: set correct number of banks for CIK chips in DCEMarek Olšák
We don't have the NUM_BANKS parameter, so we have to calculate it from the other parameters. NUM_BANKS is not constant on CIK. This fixes 2D tiling for the display engine on CIK. Signed-off-by: Marek Olšák <marek.olsak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-12-23usb: musb: Rework USB and USB_GADGET dependencyEzequiel Garcia
This USB controller can work in as host-only, gadget-only or dual-role modes. Rework the dependency on the USB and USB_GADGET configs in order to allow building the driver when !USB or !USG_GADGET. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-23drm/radeon: set correct pipe config for Hawaii in DCEMarek Olšák
Signed-off-by: Marek Olšák <marek.olsak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-12-23usb: phy: fix some Kconfig descriptionsAaro Koskinen
Some module names are not up to date in Kconfig help texts. Fix that. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-23usb: phy: isp1301-omap: fix smatch warningsAaro Koskinen
phy-isp1301-omap produces the following smatch warnings: drivers/usb/phy/phy-isp1301-omap.c:1280 isp1301_set_host() warn: variable dereferenced before check 'otg' (see line 1278) drivers/usb/phy/phy-isp1301-omap.c:1336 isp1301_set_peripheral() warn: variable dereferenced before check 'otg' (see line 1334) drivers/usb/phy/phy-isp1301-omap.c:1417 isp1301_start_srp() warn: variable dereferenced before check 'otg' (see line 1414) drivers/usb/phy/phy-isp1301-omap.c:1445 isp1301_start_hnp() warn: variable dereferenced before check 'otg' (see line 1442) Fix by deleting bogus NULL pointer checks. The USB framework will always call us with a valid OTG pointer. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-23usb: phy: tahvo: fix smatch warningsAaro Koskinen
phy-tahvo introduced the following smatch warnings: drivers/usb/phy/phy-tahvo.c:203 tahvo_usb_set_host() warn: variable dereferenced before check 'otg' (see line 199) drivers/usb/phy/phy-tahvo.c:235 tahvo_usb_set_peripheral() warn: variable dereferenced before check 'otg' (see line 231) Fix by deleting bogus NULL pointer checks. The USB framework will always call us with a valid OTG pointer. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-23usb: phy-twl6030: Add missing bracesSachin Kamat
Silences the below warning: WARNING: sizeof *twl should be sizeof(*twl) Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-23usb: phy-fsm: Staticize local symbolsSachin Kamat
Local symbols appearing only in this file are made static. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-23usb: phy-keystone: Remove redundant of_match_ptr helperSachin Kamat
'keystone_usbphy_ids' is always compiled in. Hence the helper macro is not needed. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: WingMan Kwok <w-kwok2@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-23drm/radeon: expose render backend mask to the userspaceMarek Olšák
This will allow userspace to correctly program the PA_SC_RASTER_CONFIG register, so it can be considered a fix. Signed-off-by: Marek Olšák <marek.olsak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-12-23drm/radeon: fix render backend setup for SI and CIKMarek Olšák
Only the render backends of the first shader engine were enabled. The others were erroneously disabled. Enabling the other render backends improves performance a lot. Unigine Sanctuary on Bonaire: Before: 15 fps After: 90 fps Judging from the fan noise, the GPU was also underclocked when the other render backends were disabled, resulting in horrible performance. The fan is a lot noisy under load now. Signed-off-by: Marek Olšák <marek.olsak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-12-23drm/radeon: 0x9649 is SUMO2 not SUMOAlex Deucher
Fixes rendering corruption due to incorrect gfx configuration. bug: https://bugs.freedesktop.org/show_bug.cgi?id=63599 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-12-23drm/radeon: fix UVD 256MB checkChristian König
Otherwise the kernel might reject our decoding requests. Signed-off-by: Christian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-12-23ASoC: blackfin: Don't set unused struct snd_pcm_hardware fieldsLars-Peter Clausen
The ASoC core assumes that the PCM component of the ASoC card transparently moves data around and does not impose any restrictions on the memory layout or the transfer speed. It ignores all fields from the snd_pcm_hardware struct for the PCM driver that are related to this. Setting these fields in the PCM driver might suggest otherwise though, so rather not set them. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-23ALSA: hiface: Fix typo in 352800 rate definitionMichael Trimarchi
The Vaughan device support the 352800 rate and not the 352000 Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-12-23Merge tag 'drm-intel-fixes-2013-12-18' of ↵Dave Airlie
git://people.freedesktop.org/~danvet/drm-intel into drm-fixes Besides the 2 fixes for tricky corner cases in gem from Chris I've promised already two patche from Paulo to fix pc8 warnings (both ported from -next, bug report from Dave Jones) and one patch from to fix vga enable/disable on snb+. That one is a really old bug, but apparently it can cause machine hangs if you try hard enough with vgacon/efifb handover. * tag 'drm-intel-fixes-2013-12-18' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: Use the correct GMCH_CTRL register for Sandybridge+ drm/i915: get a PC8 reference when enabling the power well drm/i915: change CRTC assertion on LCPLL disable drm/i915: Fix erroneous dereference of batch_obj inside reset_status drm/i915: Prevent double unref following alloc failure during execbuffer
2013-12-23Merge branch 'drm-fixes-3.13' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes - fix for a long standing corruption bug on some Trinity/Richland parts. - Stability fix for cayman dpm - audio fixes for dce6+ * 'drm-fixes-3.13' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: fix asic gfx values for scrapper asics drm/radeon: check for 0 count in speaker allocation and SAD code drm/radeon/dpm: disable ss on Cayman drm/radeon/dce6: set correct number of audio pins
2013-12-23drm/ttm: Fix swapin regressionThomas Hellstrom
Commit "drm/ttm: Don't move non-existing data" didn't take the swapped-out corner case into account. This patch corrects that. Fixes blank screen after attempted suspend / hibernate on vmwgfx. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-12-23gpu: fix qxl missing crc32_leRandy Dunlap
Fix build error: qxl uses crc32 functions so it needs to select CRC32. Also use angle quotes around a kernel header file name. drivers/built-in.o: In function `qxl_display_read_client_monitors_config': (.text+0x19d754): undefined reference to `crc32_le' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-12-22ipv4: consistent reporting of pmtu data in case of corkingHannes Frederic Sowa
We report different pmtu values back on the first write and on further writes on an corked socket. Also don't include the dst.header_len (respectively exthdrlen) as this should already be dealt with by the interface mtu of the outgoing (virtual) interface and policy of that interface should dictate if fragmentation should happen. Instead reduce the pmtu data by IP options as we do for IPv6. Make the same changes for ip_append_data, where we did not care about options or dst.header_len at all. Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-22drivers: net : cpsw: pass proper device name while requesting irqMugunthan V N
During checking the interrupts with "cat /proc/interrupts", it is showing device name as (null), this change was done with commit id aa1a15e2d where request_irq is changed to devm_request_irq also changing the irq name from platform device name to net device name, but the net device is not registered at this point with the network frame work, so devm_request_irq is called with device name as NULL, by which it is showed as "(null)" in "cat /proc/interrupts". So this patch changes back irq name to platform device name itself in devm_request_irq so that the device name shows as below. Previous to this patch root@am335x-evm:~# cat /proc/interrupts CPU0 28: 2265 INTC 12 edma 30: 80 INTC 14 edma_error 56: 0 INTC 40 (null) 57: 1794 INTC 41 (null) 58: 7 INTC 42 (null) 59: 0 INTC 43 (null) With this patch root@am335x-evm:~# cat /proc/interrupts CPU0 28: 213 INTC 12 edma 30: 9 INTC 14 edma_error 56: 0 INTC 40 4a100000.ethernet 57: 16097 INTC 41 4a100000.ethernet 58: 11964 INTC 42 4a100000.ethernet 59: 0 INTC 43 4a100000.ethernet Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-22Merge branch 'cxgb4'David S. Miller
Hariprasad Shenai says: ==================== This patch series provides miscelleneous fixes for Chelsio T4/T5 adapters related to server entries and server filter entries. Also, fixes a bug in ULD (Upper Level Driver) like iw_cxgb4 where-in it calculates wrong tuple values on T5 adapter. So, a new API cxgb4_select_ntuple is exported so as to enable Upper Lever Drivers like iw_cxgb4 to correctly calculate tuple values. The patches series is created agains David Miller's 'net' tree. And includes patches on cxgb4 and iw_cxgb4 driver. Patch 8/8 (RDMA-cxgb4-Use-cxgb4_select_ntuple-to-correctly-calc.patch) has a build dependency on Patch 5/8 (cxgb4-Add-API-to-correctly-calculate-tuple-fields.patch). Also, Patch 6/8 (RDMA-cxgb4-Calculate-the-filter-server-TID-properly.patch) has a functional dependency on Patch 3/8 (cxgb4-Assign-filter-server-TIDs-properly.patch) We would like to request this patch series to get merged via David Miller's 'net' tree. We have included all the maintainers of respective drivers. Kindly review the change and let us know in case of any review comments. V2 changes: - Removed earlier patch which added sftids_in_use counter. However, the counter was actually not used anywhere in this patch series. Thanks to David Miller for spotting this. We have dropped this patch in V2 and will submit a more complete patch which uses sftids_in_use counter later on. - Fixed a 'checkpatch.pl --strict' warning on Patch 5/8 (cxgb4-Add-API-to-correctly-calculate-tuple-fields.patch). - Removed some un-used #defines from Patch 5/8 (cxgb4-Add-API-to-correctly-calculate-tuple-fields.patch). ==================== Signed-off-by: David S. Miller <davem@davemloft.net> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
2013-12-22RDMA/cxgb4: Use cxgb4_select_ntuple to correctly calculate ntuple fieldsKumar Sanghvi
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-22RDMA/cxgb4: Server filters are supported only for IPv4Kumar Sanghvi
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-22RDMA/cxgb4: Calculate the filter server TID properlyKumar Sanghvi
Based on original work by Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-22cxgb4: Add API to correctly calculate tuple fieldsKumar Sanghvi
Adds API cxgb4_select_ntuple so as to enable Upper Level Drivers to correctly calculate the tuple fields. Adds constant definitions for TP_VLAN_PRI_MAP for the Compressed Filter Tuple field widths and structures and uses them. Also, the CPL Parameters field for T5 is 40 bits so we need to prototype cxgb4_select_ntuple() to calculate and return u64 values. Based on original work by Casey Leedom <leedom@chelsio.com> Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-22cxgb4: Account for stid entries properly in case of IPv6Kumar Sanghvi
IPv6 uses 2 TIDs with CLIP enabled and 4 TIDs without CLIP. Currently we are incrementing STIDs in use by 1 for both IPv4 and IPv6 which is wrong. Further, driver currently does not have interface to query if CLIP is programmed for particular IPv6 address. So, in this patch we increment/decrement TIDs in use by 4 for IPv6 assuming absence of CLIP. Such assumption keeps us on safe side and we don't end up allocating more stids for IPv6 than actually supported. Based on original work by Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-22cxgb4: Assign filter server TIDs properlyKumar Sanghvi
The LE workaround code is incorrectly reusing the TCAM TIDs (meant for allocation by firmware in case of hash collisions) for filter servers. This patch assigns the filter server TIDs properly starting from sftid_base index. Based on original work by Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-22cxgb4: Include TCP as protocol when creating server filtersKumar Sanghvi
We were creating LE Workaround Server Filters without specifying IPPROTO_TCP (6) in the filters (when F_PROTOCOL is set in TP_VLAN_PRI_MAP). This meant that UDP packets with matching IP Addresses/Ports would get caught up in the filter and be delivered to ULDs like iw_cxgb4. So, include the protocol information in the server filter properly. Based on original work by Casey Leedom <leedom@chelsio.com> Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-22cxgb4: Reserve stid 0 for T4/T5 adaptersKumar Sanghvi
When creating offload server entries, an IPv6 passive connection request can trigger a reply with a null STID, whereas the driver would expect the reply 'STID to match the value used for the request. This happens due to h/w limitation on T4 and T5. This patch ensures that STID 0 is never used if the stid range starts from zero. Based on original work by Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-22Linux 3.13-rc5v3.13-rc5Linus Torvalds
2013-12-22Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "Much smaller batch of fixes this week. Biggest one is a revert of an OMAP display change that removed some non-DT pinmux code that was still needed for 3.13 to get DSI displays to work. There's also a fix that resolves some misdescribed GPIO controller resources on shmobile. The rest are mostly smaller fixes, a couple of MAINTAINERS updates, etc" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: Revert "ARM: OMAP2+: Remove legacy mux code for display.c" MAINTAINERS: Add keystone clock drivers MAINTAINERS: Add keystone git tree information ARM: s3c64xx: dt: Fix boot failure due to double clock initialization ARM: shmobile: r8a7790: Fix GPIO resources in DTS irqchip: renesas-intc-irqpin: Fix register bitfield shift calculation ARM: shmobile: lager: phy fixup needs CONFIG_PHYLIB
2013-12-22Merge tag 'firewire-fix' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394 Pull firewire fixlet from Stefan Richter: "A one-liner to reenable WRITE SAME over SBP-2 like in v3.8...v3.12. Buggy targets which could malfunction when being subjected to this command are already sufficiently protected by a scsi_level check in sd + SCSI core" * tag 'firewire-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire: sbp2: bring back WRITE SAME support
2013-12-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds
Pull SCSI target fixes from Nicholas Bellinger: "Mostly minor items this time around, the most notable being a FILEIO backend change to enforce hw_max_sectors based upon the current block_size to address a bug where large sized I/Os (> 1M) where being rejected" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: qla2xxx: Fix scsi_host leak on qlt_lport_register callback failure target: Remove extra percpu_ref_init target/file: Update hw_max_sectors based on current block_size iser-target: Move INIT_WORK setup into isert_create_device_ib_res iscsi-target: Fix incorrect np->np_thread NULL assignment qla2xxx: Fix schedule_delayed_work() for target timeout calculations iser-target: fix error return code in isert_create_device_ib_res() iscsi-target: Fix-up all zero data-length CDBs with R/W_BIT set target: Remove write-only stats fields and lock from struct se_node_acl iscsi-target: return -EINVAL on oversized configfs parameter
2013-12-22Merge git://git.kvack.org/~bcrl/aio-nextLinus Torvalds
Pull AIO leak fixes from Ben LaHaise: "I've put these two patches plus Linus's change through a round of tests, and it passes millions of iterations of the aio numa migratepage test, as well as a number of repetitions of a few simple read and write tests. The first patch fixes the memory leak Kent introduced, while the second patch makes aio_migratepage() much more paranoid and robust" * git://git.kvack.org/~bcrl/aio-next: aio/migratepages: make aio migrate pages sane aio: fix kioctx leak introduced by "aio: Fix a trinity splat"
2013-12-22aio: clean up and fix aio_setup_ring page mappingLinus Torvalds
Since commit 36bc08cc01709 ("fs/aio: Add support to aio ring pages migration") the aio ring setup code has used a special per-ring backing inode for the page allocations, rather than just using random anonymous pages. However, rather than remembering the pages as it allocated them, it would allocate the pages, insert them into the file mapping (dirty, so that they couldn't be free'd), and then forget about them. And then to look them up again, it would mmap the mapping, and then use "get_user_pages()" to get back an array of the pages we just created. Now, not only is that incredibly inefficient, it also leaked all the pages if the mmap failed (which could happen due to excessive number of mappings, for example). So clean it all up, making it much more straightforward. Also remove some left-overs of the previous (broken) mm_populate() usage that was removed in commit d6c355c7dabc ("aio: fix race in ring buffer page lookup introduced by page migration support") but left the pointless and now misleading MAP_POPULATE flag around. Tested-and-acked-by: Benjamin LaHaise <bcrl@kvack.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-12-22staging: iio: hmc5843: Remove redundant of_match_ptr helperSachin Kamat
'hmc5843_of_match' is always compiled in. Hence the helper macro is not needed. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-12-22iio: cm36651: Remove redundant of_match_ptr helperSachin Kamat
'cm36651_of_match' is always compiled in. Hence the helper macro is not needed. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-12-21Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless John W. Linville says: ==================== Please consider pulling this batch of fixes for the 3.13 stream... For the mac80211 bits, Johannes says: "Here's a fix for another potential radiotap parser buffer overrun thanks to Evan Huus, and a fix for a cfg80211 warning in a certain corner case (reconnecting to the same BSS)." For the bluetooth bits, Gustavo says: "Two patches in this pull request. An important fix from Marcel in the permission check for HCI User Channels, there was a extra check for CAP_NET_RAW, and it was now removed. These channels should only require CAP_NET_ADMIN. The other patch is a device id addition." On top of that... Sujith Manoharan provides a workaround for a hardware problem that can result in lost interrupts. Larry Finger fixes an oops when unloading the rtlwifi driver (Red Hat bug 852761). Mathy Vanhoef fixes a somewhat minor MAC address privacy issue (CVE-2013-4579). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-21hyperv: Fix race between probe and open callsHaiyang Zhang
Moving the register_netdev to the end of probe to prevent possible open call happens before NetVSP is connected. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-22powercap / RAPL: add support for ValleyView SocJacob Pan
This patch adds support for RAPL on Intel ValleyView based SoC platforms, such as Baytrail. Besides adding CPU ID, special energy unit encoding is handled for ValleyView. Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-12-21staging: line6: Add support for POD HD400 to line6usb driverChris Bajumpaa
This patch adds support for the Line 6 POD HD400 to the line6usb driver. Signed-off-by: Chris Bajumpaa <cbajumpa@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-21USB: core: remove CONFIG_USB_DEBUG usageGreg Kroah-Hartman
CONFIG_USB_DEBUG is going away, so remove the few places in the USB core that relied on them. This means that we always now do the "debug" checks for every urb submitted, which is a good idea, as who knows how many driver bugs we have been ignoring when people forget to enable this option. Also, with the overall speed of USB, doing these extra checks should not cause any additional overhead. Also, no longer announce all devices being added to the system if CONFIG_USB_DEBUG is enabled, as it's not going to be around much longer. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-21USB: gadget: fix up some comments about CONFIG_USB_DEBUGGreg Kroah-Hartman
These two gadget drivers said that their #endif was for CONFIG_USB_DEBUG, but they really were not, so fix them up to be correct. Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-21Merge tag 'for-usb-next-2013-12-20' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/sarah/xhci into usb-next Sarah writes: xhci: Cleanups, non-urgent fixes for 3.14. Happy Holidays, Greg! Here's four patches to be queued to usb-next for 3.14. One adds a module parameter to the xHCI driver to allow users to enable xHCI quirks without recompiling their kernel, which you've already said is fine. The second patch is a bug fix for new usbtest code that's only in usb-next. The third patch is simple cleanup. The last patch is a non-urgent bug fix for xHCI platform devices. The bug has been in the code since 3.9. You've been asking me to hold off on non-urgent bug fixes after -rc4/-rc5, so it can go into usb-next, and be backported to stable once 3.14 is out. These have all been tested over the past week. I did run across one oops, but it turned out to be a bug in 3.12, and therefore not related to any of these patches. Please queue these for usb-next and 3.14. Thanks, Sarah Sharp
2013-12-22PM / sleep: Fix memory leak in pm_vt_switch_unregister().Masami Ichikawa
kmemleak reported a memory leak as below. unreferenced object 0xffff880118f14700 (size 32): comm "swapper/0", pid 1, jiffies 4294877401 (age 123.283s) hex dump (first 32 bytes): 00 01 10 00 00 00 ad de 00 02 20 00 00 00 ad de .......... ..... 00 d4 d2 18 01 88 ff ff 01 00 00 00 00 04 00 00 ................ backtrace: [<ffffffff814edb1e>] kmemleak_alloc+0x4e/0xb0 [<ffffffff811889dc>] kmem_cache_alloc_trace+0x1ec/0x260 [<ffffffff810aba66>] pm_vt_switch_required+0x76/0xb0 [<ffffffff812f39f5>] register_framebuffer+0x195/0x320 [<ffffffff8130af18>] efifb_probe+0x718/0x780 [<ffffffff81391495>] platform_drv_probe+0x45/0xb0 [<ffffffff8138f407>] driver_probe_device+0x87/0x3a0 [<ffffffff8138f7f3>] __driver_attach+0x93/0xa0 [<ffffffff8138d413>] bus_for_each_dev+0x63/0xa0 [<ffffffff8138ee5e>] driver_attach+0x1e/0x20 [<ffffffff8138ea40>] bus_add_driver+0x180/0x250 [<ffffffff8138fe74>] driver_register+0x64/0xf0 [<ffffffff813913ba>] __platform_driver_register+0x4a/0x50 [<ffffffff8191e028>] efifb_driver_init+0x12/0x14 [<ffffffff8100214a>] do_one_initcall+0xfa/0x1b0 [<ffffffff818e40e0>] kernel_init_freeable+0x17b/0x201 In pm_vt_switch_required(), "entry" variable is allocated via kmalloc(). So, in pm_vt_switch_unregister(), it needs to call kfree() when object is deleted from list. Signed-off-by: Masami Ichikawa <masami256@gmail.com> Reviewed-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-12-22cpufreq: Use CONFIG_CPU_FREQ_DEFAULT_* to set initial policy for setpolicy ↵Jason Baron
drivers When configuring a default governor (via CONFIG_CPU_FREQ_DEFAULT_*) with the intel_pstate driver, the desired default policy is not properly set. For example, setting 'CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE' ends up with the 'powersave' policy being set. Fix by configuring the correct default policy, if either 'powersave' or 'performance' are requested. Otherwise, fallback to what the driver originally set via its 'init' routine. Signed-off-by: Jason Baron <jbaron@akamai.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-12-22cpufreq: remove sysfs files for CPUs which failed to come back after resumeViresh Kumar
There are cases where cpufreq_add_dev() may fail for some CPUs during system resume. With the current code we will still have sysfs cpufreq files for those CPUs and struct cpufreq_policy would be already freed for them. Hence any operation on those sysfs files would result in kernel warnings. Example of problems resulting from resume errors (from Bjørn Mork): WARNING: CPU: 0 PID: 6055 at fs/sysfs/file.c:343 sysfs_open_file+0x77/0x212() missing sysfs attribute operations for kobject: (null) Modules linked in: [stripped as irrelevant] CPU: 0 PID: 6055 Comm: grep Tainted: G D 3.13.0-rc2 #153 Hardware name: LENOVO 2776LEG/2776LEG, BIOS 6EET55WW (3.15 ) 12/19/2011 0000000000000009 ffff8802327ebb78 ffffffff81380b0e 0000000000000006 ffff8802327ebbc8 ffff8802327ebbb8 ffffffff81038635 0000000000000000 ffffffff811823c7 ffff88021a19e688 ffff88021a19e688 ffff8802302f9310 Call Trace: [<ffffffff81380b0e>] dump_stack+0x55/0x76 [<ffffffff81038635>] warn_slowpath_common+0x7c/0x96 [<ffffffff811823c7>] ? sysfs_open_file+0x77/0x212 [<ffffffff810386e3>] warn_slowpath_fmt+0x41/0x43 [<ffffffff81182dec>] ? sysfs_get_active+0x6b/0x82 [<ffffffff81182382>] ? sysfs_open_file+0x32/0x212 [<ffffffff811823c7>] sysfs_open_file+0x77/0x212 [<ffffffff81182350>] ? sysfs_schedule_callback+0x1ac/0x1ac [<ffffffff81122562>] do_dentry_open+0x17c/0x257 [<ffffffff8112267e>] finish_open+0x41/0x4f [<ffffffff81130225>] do_last+0x80c/0x9ba [<ffffffff8112dbbd>] ? inode_permission+0x40/0x42 [<ffffffff81130606>] path_openat+0x233/0x4a1 [<ffffffff81130b7e>] do_filp_open+0x35/0x85 [<ffffffff8113b787>] ? __alloc_fd+0x172/0x184 [<ffffffff811232ea>] do_sys_open+0x6b/0xfa [<ffffffff811233a7>] SyS_openat+0xf/0x11 [<ffffffff8138c812>] system_call_fastpath+0x16/0x1b To fix this, remove those sysfs files or put the associated kobject in case of such errors. Also, to make it simple, remove the cpufreq sysfs links from all the CPUs (except for the policy->cpu) during suspend, as that operation won't result in a loss of sysfs file permissions and we can create those links during resume just fine. Fixes: 5302c3fb2e62 ("cpufreq: Perform light-weight init/teardown during suspend/resume") Reported-and-tested-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: 3.12+ <stable@vger.kernel.org> # 3.12+ [rjw: Changelog] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-12-21aio/migratepages: make aio migrate pages saneBenjamin LaHaise
The arbitrary restriction on page counts offered by the core migrate_page_move_mapping() code results in rather suspicious looking fiddling with page reference counts in the aio_migratepage() operation. To fix this, make migrate_page_move_mapping() take an extra_count parameter that allows aio to tell the code about its own reference count on the page being migrated. While cleaning up aio_migratepage(), make it validate that the old page being passed in is actually what aio_migratepage() expects to prevent misbehaviour in the case of races. Signed-off-by: Benjamin LaHaise <bcrl@kvack.org>
generated by cgit (git 2.34.1) at 2025-09-21 17:24:25 +0000