| Age | Commit message (Collapse) | Author |
|---|
|
A couple of ARM defconfig files (and one for sh) still refer to the
IRDA options that were removed in linux-4.14. Remove the entries
as well now.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
A lot of Kconfig options have changed over the years, and we tend
to not do a blind 'make defconfig' to refresh the files, to ensure
we catch options that should not have gone away.
I used some a bit of scripting to only rework the bits where an
option moved around in any of the defconfig files, without also
dropping any of the other lines, to make it clearer which options
we no longer have.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
On pcb8291, can0 and the network driver share some of the GPIOs so only
1 device can be active. Therefore disable can0 as we want to enable the
network driver.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220719201158.1696168-3-horatiu.vultur@microchip.com
|
|
The pcb8291 can be rebooted by toggling the GPIO 56. Therefore enable
this in DT.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220719201158.1696168-2-horatiu.vultur@microchip.com
|
|
Current implementation is not able to configure more than 32 pins
due to incorrect data type. So type casting with unsigned long
to avoid it.
Fixes: 02b3f84d9080 ("xilinx: Switch to use bitmap APIs")
Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
A scheduling-while-atomic fix for drm/scheduler, a locking fix for TTM,
a typo fix for panel-edp and a resource removal fix for imx/dcss
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220721085550.hrwbukj34y56rzva@houat
|
|
In bcm5421_init(), we should call of_node_put() for the reference
returned by of_get_parent() which has increased the refcount.
Fixes: 3c326fe9cb7a ("[PATCH] ppc64: Add new PHY to sungem")
Signed-off-by: Liang He <windhl@126.com>
Link: https://lore.kernel.org/r/20220720131003.1287426-1-windhl@126.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
While phylink_pcs_ops :: pcs_get_state does return void, xpcs_get_state()
does check for a non-zero return code from xpcs_get_state_c37_sgmii()
and prints that as a message to the kernel log.
However, a non-zero return code from xpcs_read() is translated into
"return false" (i.e. zero as int) and the I/O error is therefore not
printed. Fix that.
Fixes: b97b5331b8ab ("net: pcs: add C37 SGMII AN support for intel mGbE controller")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220720112057.3504398-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ub->mutex is used to protecting reading and writing ub->mm, then the
following lockdep warning is triggered.
Fix it by using one dedicated spin lock for protecting ub->mm.
[1] lockdep warning
[ 25.046186] ======================================================
[ 25.048886] WARNING: possible circular locking dependency detected
[ 25.051610] 5.19.0-rc4_for-v5.20+ #149 Not tainted
[ 25.053665] ------------------------------------------------------
[ 25.056334] ublk/989 is trying to acquire lock:
[ 25.058296] ffff975d0329a918 (&disk->open_mutex){+.+.}-{3:3}, at: bd_register_pending_holders+0x2a/0x110
[ 25.063678]
[ 25.063678] but task is already holding lock:
[ 25.066246] ffff975d1df59708 (&ub->mutex){+.+.}-{3:3}, at: ublk_ctrl_uring_cmd+0x2df/0x730
[ 25.069423]
[ 25.069423] which lock already depends on the new lock.
[ 25.069423]
[ 25.072603]
[ 25.072603] the existing dependency chain (in reverse order) is:
[ 25.074908]
[ 25.074908] -> #3 (&ub->mutex){+.+.}-{3:3}:
[ 25.076386] __mutex_lock+0x93/0x870
[ 25.077470] ublk_ch_mmap+0x3a/0x140
[ 25.078494] mmap_region+0x375/0x5a0
[ 25.079386] do_mmap+0x33a/0x530
[ 25.080168] vm_mmap_pgoff+0xb9/0x150
[ 25.080979] ksys_mmap_pgoff+0x184/0x1f0
[ 25.081838] do_syscall_64+0x37/0x80
[ 25.082653] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 25.083730]
[ 25.083730] -> #2 (&mm->mmap_lock#2){++++}-{3:3}:
[ 25.084707] __might_fault+0x55/0x80
[ 25.085344] _copy_from_user+0x1e/0xa0
[ 25.086020] get_sg_io_hdr+0x26/0xb0
[ 25.086651] scsi_ioctl+0x42f/0x960
[ 25.087267] sr_block_ioctl+0xe8/0x100
[ 25.087734] blkdev_ioctl+0x134/0x2b0
[ 25.088196] __x64_sys_ioctl+0x8a/0xc0
[ 25.088677] do_syscall_64+0x37/0x80
[ 25.089044] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 25.089548]
[ 25.089548] -> #1 (&cd->lock){+.+.}-{3:3}:
[ 25.090072] __mutex_lock+0x93/0x870
[ 25.090452] sr_block_open+0x64/0xe0
[ 25.090837] blkdev_get_whole+0x26/0x90
[ 25.091445] blkdev_get_by_dev.part.0+0x1ce/0x2f0
[ 25.092203] blkdev_open+0x52/0x90
[ 25.092617] do_dentry_open+0x1ca/0x360
[ 25.093499] path_openat+0x78d/0xcb0
[ 25.094136] do_filp_open+0xa1/0x130
[ 25.094759] do_sys_openat2+0x76/0x130
[ 25.095454] __x64_sys_openat+0x5c/0x70
[ 25.096078] do_syscall_64+0x37/0x80
[ 25.096637] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 25.097304]
[ 25.097304] -> #0 (&disk->open_mutex){+.+.}-{3:3}:
[ 25.098229] __lock_acquire+0x12e2/0x1f90
[ 25.098789] lock_acquire+0xbf/0x2c0
[ 25.099256] __mutex_lock+0x93/0x870
[ 25.099706] bd_register_pending_holders+0x2a/0x110
[ 25.100246] device_add_disk+0x209/0x370
[ 25.100712] ublk_ctrl_uring_cmd+0x405/0x730
[ 25.101205] io_issue_sqe+0xfe/0x2ac0
[ 25.101665] io_submit_sqes+0x352/0x1820
[ 25.102131] __do_sys_io_uring_enter+0x848/0xdc0
[ 25.102646] do_syscall_64+0x37/0x80
[ 25.103087] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 25.103640]
[ 25.103640] other info that might help us debug this:
[ 25.103640]
[ 25.104549] Chain exists of:
[ 25.104549] &disk->open_mutex --> &mm->mmap_lock#2 --> &ub->mutex
[ 25.104549]
[ 25.105611] Possible unsafe locking scenario:
[ 25.105611]
[ 25.106258] CPU0 CPU1
[ 25.106677] ---- ----
[ 25.107100] lock(&ub->mutex);
[ 25.107446] lock(&mm->mmap_lock#2);
[ 25.108045] lock(&ub->mutex);
[ 25.108802] lock(&disk->open_mutex);
[ 25.109265]
[ 25.109265] *** DEADLOCK ***
[ 25.109265]
[ 25.110117] 2 locks held by ublk/989:
[ 25.110490] #0: ffff975d07bbf8a8 (&ctx->uring_lock){+.+.}-{3:3}, at: __do_sys_io_uring_enter+0x83e/0xdc0
[ 25.111249] #1: ffff975d1df59708 (&ub->mutex){+.+.}-{3:3}, at: ublk_ctrl_uring_cmd+0x2df/0x730
[ 25.111943]
[ 25.111943] stack backtrace:
[ 25.112557] CPU: 2 PID: 989 Comm: ublk Not tainted 5.19.0-rc4_for-v5.20+ #149
[ 25.113137] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-1.fc33 04/01/2014
[ 25.113792] Call Trace:
[ 25.114130] <TASK>
[ 25.114417] dump_stack_lvl+0x71/0xa0
[ 25.114771] check_noncircular+0xdf/0x100
[ 25.115137] ? register_lock_class+0x38/0x470
[ 25.115524] __lock_acquire+0x12e2/0x1f90
[ 25.115887] ? find_held_lock+0x2b/0x80
[ 25.116244] lock_acquire+0xbf/0x2c0
[ 25.116590] ? bd_register_pending_holders+0x2a/0x110
[ 25.117009] __mutex_lock+0x93/0x870
[ 25.117362] ? bd_register_pending_holders+0x2a/0x110
[ 25.117780] ? bd_register_pending_holders+0x2a/0x110
[ 25.118201] ? kobject_add+0x71/0x90
[ 25.118546] ? bd_register_pending_holders+0x2a/0x110
[ 25.118958] bd_register_pending_holders+0x2a/0x110
[ 25.119373] device_add_disk+0x209/0x370
[ 25.119732] ublk_ctrl_uring_cmd+0x405/0x730
[ 25.120109] ? rcu_read_lock_sched_held+0x3c/0x70
[ 25.120514] io_issue_sqe+0xfe/0x2ac0
[ 25.120863] io_submit_sqes+0x352/0x1820
[ 25.121228] ? rcu_read_lock_sched_held+0x3c/0x70
[ 25.121626] ? __do_sys_io_uring_enter+0x83e/0xdc0
[ 25.122028] ? find_held_lock+0x2b/0x80
[ 25.122390] ? __do_sys_io_uring_enter+0x848/0xdc0
[ 25.122791] __do_sys_io_uring_enter+0x848/0xdc0
[ 25.123190] ? syscall_enter_from_user_mode+0x20/0x70
[ 25.123606] ? syscall_enter_from_user_mode+0x20/0x70
[ 25.124024] do_syscall_64+0x37/0x80
[ 25.124383] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 25.124829] RIP: 0033:0x7f120a762af6
[ 25.125223] Code: 45 c1 41 89 c2 41 b9 08 00 00 00 41 83 ca 10 f6 87 d0 00 00 00 01 8b bf cc 00 00 00 44 0f 44 d0 45 31 c0c
[ 25.126576] RSP: 002b:00007ffdcb3c5518 EFLAGS: 00000246 ORIG_RAX: 00000000000001aa
[ 25.127153] RAX: ffffffffffffffda RBX: 00000000013aef50 RCX: 00007f120a762af6
[ 25.127748] RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000004
[ 25.128351] RBP: 000000000000000b R08: 0000000000000000 R09: 0000000000000008
[ 25.128956] R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffdcb3c74a6
[ 25.129524] R13: 00000000013aef50 R14: 0000000000000000 R15: 00000000000003df
[ 25.130121] </TASK>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220721153117.591394-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When trying to load modules built for RISC-V which include assembly files
the kernel loader errors with "unexpected relocation type 'R_RISCV_ALIGN'"
due to R_RISCV_ALIGN relocations being generated by the assembler.
The R_RISCV_ALIGN relocations can be removed at the expense of code space
by adding -mno-relax to gcc and as. In commit 7a8e7da42250138
("RISC-V: Fixes to module loading") -mno-relax is added to the build
variable KBUILD_CFLAGS_MODULE. See [1] for more info.
The issue is that when kbuild builds a .S file, it invokes gcc with
the -mno-relax flag, but this is not being passed through to the
assembler. Adding -Wa,-mno-relax to KBUILD_AFLAGS_MODULE ensures that
the assembler is invoked correctly. This may have now been fixed in
gcc[2] and this addition should not stop newer gcc and as from working.
[1] https://github.com/riscv/riscv-elf-psabi-doc/issues/183
[2] https://github.com/gcc-mirror/gcc/commit/3b0a7d624e64eeb81e4d5e8c62c46d86ef521857
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Link: https://lore.kernel.org/r/20220529152200.609809-1-ben.dooks@codethink.co.uk
Fixes: ab1ef68e5401 ("RISC-V: Add sections of PLT and GOT for kernel module")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD fix from Richard Weinberger:
"A aingle NAND controller fix:
- gpmi: Fix busy timeout setting (wrong calculation, yes again)"
* tag 'mtd/fixes-for-5.19-final' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: rawnand: gpmi: Set WAIT_FOR_READY timeout based on program/erase times
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from can.
Still no major regressions, most of the changes are still due to data
races fixes, plus the usual bunch of drivers fixes.
Previous releases - regressions:
- tcp/udp: make early_demux back namespacified.
- dsa: fix issues with vlan_filtering_is_global
Previous releases - always broken:
- ip: fix data-races around ipv4_net_table (round 2, 3 & 4)
- amt: fix validation and synchronization bugs
- can: fix detection of mcp251863
- eth: iavf: fix handling of dummy receive descriptors
- eth: lan966x: fix issues with MAC table
- eth: stmmac: dwmac-mediatek: fix clock issue
Misc:
- dsa: update documentation"
* tag 'net-5.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (107 commits)
mlxsw: spectrum_router: Fix IPv4 nexthop gateway indication
net/sched: cls_api: Fix flow action initialization
tcp: Fix data-races around sysctl_tcp_max_reordering.
tcp: Fix a data-race around sysctl_tcp_abort_on_overflow.
tcp: Fix a data-race around sysctl_tcp_rfc1337.
tcp: Fix a data-race around sysctl_tcp_stdurg.
tcp: Fix a data-race around sysctl_tcp_retrans_collapse.
tcp: Fix data-races around sysctl_tcp_slow_start_after_idle.
tcp: Fix a data-race around sysctl_tcp_thin_linear_timeouts.
tcp: Fix data-races around sysctl_tcp_recovery.
tcp: Fix a data-race around sysctl_tcp_early_retrans.
tcp: Fix data-races around sysctl knobs related to SYN option.
udp: Fix a data-race around sysctl_udp_l3mdev_accept.
ip: Fix data-races around sysctl_ip_prot_sock.
ipv4: Fix data-races around sysctl_fib_multipath_hash_fields.
ipv4: Fix data-races around sysctl_fib_multipath_hash_policy.
ipv4: Fix a data-race around sysctl_fib_multipath_use_neigh.
can: rcar_canfd: Add missing of_node_put() in rcar_canfd_probe()
can: mcp251xfd: fix detection of mcp251863
Documentation: fix udp_wmem_min in ip-sysctl.rst
...
|
|
This patch slightly reworks the s390 arch_get_random_seed_{int,long}
implementation: Make sure the CPACF trng instruction is never
called in any interrupt context. This is done by adding an
additional condition in_task().
Justification:
There are some constrains to satisfy for the invocation of the
arch_get_random_seed_{int,long}() functions:
- They should provide good random data during kernel initialization.
- They should not be called in interrupt context as the TRNG
instruction is relatively heavy weight and may for example
make some network loads cause to timeout and buck.
However, it was not clear what kind of interrupt context is exactly
encountered during kernel init or network traffic eventually calling
arch_get_random_seed_long().
After some days of investigations it is clear that the s390
start_kernel function is not running in any interrupt context and
so the trng is called:
Jul 11 18:33:39 t35lp54 kernel: [<00000001064e90ca>] arch_get_random_seed_long.part.0+0x32/0x70
Jul 11 18:33:39 t35lp54 kernel: [<000000010715f246>] random_init+0xf6/0x238
Jul 11 18:33:39 t35lp54 kernel: [<000000010712545c>] start_kernel+0x4a4/0x628
Jul 11 18:33:39 t35lp54 kernel: [<000000010590402a>] startup_continue+0x2a/0x40
The condition in_task() is true and the CPACF trng provides random data
during kernel startup.
The network traffic however, is more difficult. A typical call stack
looks like this:
Jul 06 17:37:07 t35lp54 kernel: [<000000008b5600fc>] extract_entropy.constprop.0+0x23c/0x240
Jul 06 17:37:07 t35lp54 kernel: [<000000008b560136>] crng_reseed+0x36/0xd8
Jul 06 17:37:07 t35lp54 kernel: [<000000008b5604b8>] crng_make_state+0x78/0x340
Jul 06 17:37:07 t35lp54 kernel: [<000000008b5607e0>] _get_random_bytes+0x60/0xf8
Jul 06 17:37:07 t35lp54 kernel: [<000000008b56108a>] get_random_u32+0xda/0x248
Jul 06 17:37:07 t35lp54 kernel: [<000000008aefe7a8>] kfence_guarded_alloc+0x48/0x4b8
Jul 06 17:37:07 t35lp54 kernel: [<000000008aeff35e>] __kfence_alloc+0x18e/0x1b8
Jul 06 17:37:07 t35lp54 kernel: [<000000008aef7f10>] __kmalloc_node_track_caller+0x368/0x4d8
Jul 06 17:37:07 t35lp54 kernel: [<000000008b611eac>] kmalloc_reserve+0x44/0xa0
Jul 06 17:37:07 t35lp54 kernel: [<000000008b611f98>] __alloc_skb+0x90/0x178
Jul 06 17:37:07 t35lp54 kernel: [<000000008b6120dc>] __napi_alloc_skb+0x5c/0x118
Jul 06 17:37:07 t35lp54 kernel: [<000000008b8f06b4>] qeth_extract_skb+0x13c/0x680
Jul 06 17:37:07 t35lp54 kernel: [<000000008b8f6526>] qeth_poll+0x256/0x3f8
Jul 06 17:37:07 t35lp54 kernel: [<000000008b63d76e>] __napi_poll.constprop.0+0x46/0x2f8
Jul 06 17:37:07 t35lp54 kernel: [<000000008b63dbec>] net_rx_action+0x1cc/0x408
Jul 06 17:37:07 t35lp54 kernel: [<000000008b937302>] __do_softirq+0x132/0x6b0
Jul 06 17:37:07 t35lp54 kernel: [<000000008abf46ce>] __irq_exit_rcu+0x13e/0x170
Jul 06 17:37:07 t35lp54 kernel: [<000000008abf531a>] irq_exit_rcu+0x22/0x50
Jul 06 17:37:07 t35lp54 kernel: [<000000008b922506>] do_io_irq+0xe6/0x198
Jul 06 17:37:07 t35lp54 kernel: [<000000008b935826>] io_int_handler+0xd6/0x110
Jul 06 17:37:07 t35lp54 kernel: [<000000008b9358a6>] psw_idle_exit+0x0/0xa
Jul 06 17:37:07 t35lp54 kernel: ([<000000008ab9c59a>] arch_cpu_idle+0x52/0xe0)
Jul 06 17:37:07 t35lp54 kernel: [<000000008b933cfe>] default_idle_call+0x6e/0xd0
Jul 06 17:37:07 t35lp54 kernel: [<000000008ac59f4e>] do_idle+0xf6/0x1b0
Jul 06 17:37:07 t35lp54 kernel: [<000000008ac5a28e>] cpu_startup_entry+0x36/0x40
Jul 06 17:37:07 t35lp54 kernel: [<000000008abb0d90>] smp_start_secondary+0x148/0x158
Jul 06 17:37:07 t35lp54 kernel: [<000000008b935b9e>] restart_int_handler+0x6e/0x90
which confirms that the call is in softirq context. So in_task() covers exactly
the cases where we want to have CPACF trng called: not in nmi, not in hard irq,
not in soft irq but in normal task context and during kernel init.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Juergen Christ <jchrist@linux.ibm.com>
Link: https://lore.kernel.org/r/20220713131721.257907-1-freude@linux.ibm.com
Fixes: e4f74400308c ("s390/archrandom: simplify back to earlier design and initialize earlier")
[agordeev@linux.ibm.com changed desc, added Fixes and Link, removed -stable]
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Jann reported a race between munmap() and unmap_mapping_range(), where
unmap_mapping_range() will no-op once unmap_vmas() has unlinked the
VMA; however munmap() will not yet have invalidated the TLBs.
Therefore unmap_mapping_range() will complete while there are still
(stale) TLB entries for the specified range.
Mitigate this by force flushing TLBs for VM_PFNMAP ranges.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Now that architectures are no longer allowed to override
tlb_{start,end}_vma() re-arrange code so that there is only one
implementation for each of these functions.
This much simplifies trying to figure out what they actually do.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The previous patch removed the tlb_flush_end() implementation which
used tlb_flush_range(). This means:
- csky did double invalidates, a range invalidate per vma and a full
invalidate at the end
- csky actually has range invalidates and as such the generic
tlb_flush implementation is more efficient for it.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Will Deacon <will@kernel.org>
Tested-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Scattered across the archs are 3 basic forms of tlb_{start,end}_vma().
Provide two new MMU_GATHER_knobs to enumerate them and remove the per
arch tlb_{start,end}_vma() implementations.
- MMU_GATHER_NO_FLUSH_CACHE indicates the arch has flush_cache_range()
but does *NOT* want to call it for each VMA.
- MMU_GATHER_MERGE_VMAS indicates the arch wants to merge the
invalidate across multiple VMAs if possible.
With these it is possible to capture the three forms:
1) empty stubs;
select MMU_GATHER_NO_FLUSH_CACHE and MMU_GATHER_MERGE_VMAS
2) start: flush_cache_range(), end: empty;
select MMU_GATHER_MERGE_VMAS
3) start: flush_cache_range(), end: flush_tlb_range();
default
Obviously, if the architecture does not have flush_cache_range() then
it also doesn't need to select MMU_GATHER_NO_FLUSH_CACHE.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Will Deacon <will@kernel.org>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently the command 'lx-symbols' in gdb exits with the error`Function
"do_init_module" not defined in "kernel/module.c"`. This occurs because
the file kernel/module.c was moved to kernel/module/main.c.
Fix this breakage by changing the path to "kernel/module/main.c" in
LoadModuleBreakpoint.
Signed-off-by: Khalid Masum <khalid.masum.92@gmail.com>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Fixes: cfc1d277891e ("module: Move all into module/")
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Sedat Dilek noticed that I had an extraneous semicolon at the end of a
line in the previous patch.
It's harmless, but unintentional, and while compilers just treat it as
an extra empty statement, for all I know some other tooling might warn
about it. So clean it up before other people notice too ;)
Fixes: 353f7988dd84 ("watchqueue: make sure to serialize 'wqueue->defunct' properly")
Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
|
|
__blk_get_queue is only called by blk_get_queue, so merge the two.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220721063432.1714609-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
To undo the all initialization from blk_mq_init_allocated_queue in case
of a probe failure where add_disk is never called we have to call
blk_mq_exit_queue from put_disk.
This relies on the fact that drivers always call blk_mq_free_tag_set
after calling put_disk in the probe error path if they have a gendisk
at all.
We should be doing this in general, but can't do it for the normal
teardown case (yet) as the tagset can be gone by the time the disk is
released once it was added. I hope to sort this out properly eventually
but for now this isolated hack will do it.
Fixes: 6f8191fdf41d ("block: simplify disk shutdown")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220720130541.1323531-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
To fully clean up the queue if the disk allocation fails we need to
call blk_mq_destroy_queue and not just blk_put_queue.
Fixes: 6f8191fdf41d ("block: simplify disk shutdown")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220720130541.1323531-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Defer allocating the gendisk and request_queue until UBLK_CMD_START_DEV
is called. This avoids funky life times where a disk is allocated
and then can be added and removed multiple times, which has never been
supported by the block layer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220721130916.1869719-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Looking at the hctxs and cpumap is not safe without at very last a RCU
reference. It also requires the queue to be set up before starting the
device, which leads to rather awkward life time rules.
Instead rewrite ublk_ctrl_get_queue_affinity to just build the cpumask
directly from the mq_map in the tag set, similar to hctx->cpumask is
built.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220721130916.1869719-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Fold __ublk_create_dev into its only caller to avoid the packing and
unpacking of the return value into an ERR_PTR.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220721130916.1869719-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Move all per-command work into the per-command ublk_ctrl_* helpers
instead of being split over those, ublk_ctrl_cmd_validate, and the main
ublk_ctrl_uring_cmd handler. To facilitate that, the old
ublk_ctrl_stop_dev function that just contained two function calls is
folded into both callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220721130916.1869719-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
fops->open and fops->release are always paired. Use simple atomic bit
ops ot indicate if the device is opened instead of a count that can
only be 0 and 1 and a useless cmpxchg loop in ublk_ch_release.
Also don't bother clearing file->private_data is the file is about to
be freed anyway.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220721130916.1869719-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
No need to define empty versions, they can just be left out.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220721130916.1869719-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
REQ_PREFLUSH is turned into REQ_OP_FLUSH by the flush state machine
and thus never seen by a blk-mq based driver.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220721130916.1869719-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Make get_maintainers.pl work for ublk.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220721130916.1869719-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
RSPI IP on RZ/{A, G2L} SoC's has the same signal for both interrupt
and DMA transfer request. Setting DMARS register for DMA transfer
makes the signal to work as a DMA transfer request signal and
subsequent interrupt requests to the interrupt controller
are masked.
PIO fallback does not work as interrupt signal is disabled.
This patch fixes this issue by re-enabling the interrupts by
calling dmaengine_synchronize().
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20220721143449.879257-1-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
IRQ override isn't needed on modern AMD Zen systems.
There's an active low keyboard IRQ on AMD Ryzen 6000 and it will stay
this way on newer platforms. This IRQ override breaks keyboards for
almost all Ryzen 6000 laptops currently on the market.
Skip this IRQ override for all AMD Zen platforms because this IRQ
override is supposed to be a workaround for buggy ACPI DSDT and we can't
have a long list of all future AMD CPUs/Laptops in the kernel code.
If a device with buggy ACPI DSDT shows up, a separated list containing
just them should be created.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216118
Suggested-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Acked-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: XiaoYan Li <lxy.lixiaoyan@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Since commit 488dac0c9237 ("libfs: fix error cast of negative value in
simple_attr_write()"), the EINJ debugfs interface no longer accepts
negative values as input. Attempt to do so will result in EINVAL.
Fixes: 488dac0c9237 ("libfs: fix error cast of negative value in simple_attr_write()")
Signed-off-by: Qifu Zhang <zhangqifu@bytedance.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Currently, `pcl->length' records the longest decompressed length
as long as the pcluster itself isn't reclaimed. However, such
number is unneeded for the general cases since it doesn't indicate
the exact decompressed size in this round.
Instead, let's record the decompressed size for this round instead,
thus `pcl->nr_pages' can be completely dropped and pageofs_out is
also designed to be kept in sync with `pcl->length'.
Acked-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220715154203.48093-16-hsiangkao@linux.alibaba.com
|
|
Both out_bvecs and in_bvecs share the common logic for decompressed
buffers. So let's make a helper for this.
Acked-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220715154203.48093-15-hsiangkao@linux.alibaba.com
|
|
For the most cases, small pclusters can be decompressed with page
arrays on stack.
Try to leave both (de)compressed_pages on stack if possible as before.
Acked-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220715154203.48093-14-hsiangkao@linux.alibaba.com
|
|
Let's introduce struct z_erofs_decompress_backend in order to pass
on the decompression backend context between helper functions more
easier and avoid too many arguments.
Acked-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220715154203.48093-13-hsiangkao@linux.alibaba.com
|
|
In order to introduce multi-reference pclusters for compressed data
deduplication, let's get rid of the global page array for now since
it needs to be re-designed then at least.
Acked-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220715154203.48093-12-hsiangkao@linux.alibaba.com
|
|
`enum z_erofs_collectmode' is really ambiguous, but I'm not quite
sure if there are better naming, basically it's used to judge whether
inplace I/O can be used due to the current status of pclusters in
the chain.
Rename it as `enum z_erofs_pclustermode' instead.
Acked-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220715154203.48093-11-hsiangkao@linux.alibaba.com
|
|
Remove it since pagevec[] is no longer used.
Acked-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220715154203.48093-10-hsiangkao@linux.alibaba.com
|
|
Since all decompressed offsets have been integrated to bvecs[], this
patch avoids all sub-indexes so that page->private only includes a
part count and an eio flag, thus in the future folio->private can have
the same meaning.
In addition, PG_error will not be used anymore after this patch and
we're heading to use page->private (later folio->private) and
page->mapping (later folio->mapping) only.
Acked-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220715154203.48093-9-hsiangkao@linux.alibaba.com
|
|
Convert compressed_pages[] to bufvec in order to avoid using
page->private to keep onlinepage_index (decompressed offset)
for inplace I/O pages.
In the future, we only rely on folio->private to keep a countdown
to unlock folios and set folio_uptodate.
Acked-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220715154203.48093-8-hsiangkao@linux.alibaba.com
|
|
`z_erofs_decompress_pcluster()' is too long therefore it'd be better
to introduce another helper to parse compressed pages (or laterly,
compressed bvecs.)
BTW, since `compressed_bvecs' is too long as a part of the function
name, `in_bvecs' is used here instead.
Acked-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220715154203.48093-7-hsiangkao@linux.alibaba.com
|
|
Remove the old pagevec approach but keep z_erofs_page_type for now.
It will be reworked in the following commits as well.
Also rename Z_EROFS_NR_INLINE_PAGEVECS as Z_EROFS_INLINE_BVECS with
the new value 2 since it's actually enough to bootstrap.
Acked-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220715154203.48093-6-hsiangkao@linux.alibaba.com
|
|
For each pcluster, the total compressed buffers are determined in
advance, yet the number of decompressed buffers actually vary. Too
many decompressed pages can be recorded if one pcluster is highly
compressed or its pcluster size is large. That takes extra memory
footprints compared to uncompressed filesystems, especially a lot of
I/O in flight on low-ended devices.
Therefore, similar to inplace I/O, pagevec was introduced to reuse
page cache to store these pointers in the time-sharing way since
these pages are actually unused before decompressing.
In order to make it more flexable, a cleaner bufvec is used to
replace the old pagevec stuffs so that
- Decompressed offsets can be stored inline, thus it can be used
for the upcoming feature like compressed data deduplication.
It's calculated by `page_offset(page) - map->m_la';
- Towards supporting large folios for compressed inodes since
our final goal is to completely avoid page->private but use
folio->private only for all page cache pages.
Acked-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220715154203.48093-5-hsiangkao@linux.alibaba.com
|
|
`z_erofs_decompress_pcluster()' is too long therefore it'd be better
to introduce another helper to parse decompressed pages (or laterly,
decompressed bvecs.)
BTW, since `decompressed_bvecs' is too long as a part of the function
name, `out_bvecs' is used instead.
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Acked-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220715154203.48093-4-hsiangkao@linux.alibaba.com
|
|
Rearrange the code and get rid of all gotos.
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Acked-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220715154203.48093-3-hsiangkao@linux.alibaba.com
|
|
Since commit 5c6dcc57e2e5 ("erofs: get rid of
`struct z_erofs_collector'"), these arguments can be dropped as well.
No logic changes.
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Acked-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220715154203.48093-2-hsiangkao@linux.alibaba.com
|
|
READV cannot recycle buffers as it would lose some of the data required to
reimport that buffer.
Reported-by: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Fixes: b66e65f41426 ("io_uring: never call io_buffer_select() for a buffer re-select")
Signed-off-by: Dylan Yudaken <dylany@fb.com>
Link: https://lore.kernel.org/r/20220721131325.624788-1-dylany@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
in the error path of io_register_pbuf_ring, only free bl if it was
allocated.
Reported-by: Dipanjan Das <mail.dipanjan.das@gmail.com>
Fixes: c7fb19428d67 ("io_uring: add support for ring mapped supplied buffers")
Signed-off-by: Dylan Yudaken <dylany@fb.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/all/CANX2M5bXKw1NaHdHNVqssUUaBCs8aBpmzRNVEYEvV0n44P7ioA@mail.gmail.com/
Link: https://lore.kernel.org/all/CANX2M5YiZBXU3L6iwnaLs-HHJXRvrxM8mhPDiMDF9Y9sAvOHUA@mail.gmail.com/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
