summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-10-29sh: mach-systemh: Kill off dead board.Paul Mundt
This code has been untouched since it was merged many years ago, and has severely bitrotted since, suggesting that the board has no real users left. Notice of intent to remove has been sent out over the last few years, with no takers. Kill it off. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-29sh: mach-snapgear: Kill off machtype, consolidate board def.Paul Mundt
Only the secureedge5410 was ever supported by this code, so make the board specification explicit rather than perpetuating a mach group. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-29sh: mach-snapgear: Rip out superfluous PIO routines.Paul Mundt
None of these PIO routines do anything other than basic error checking, get rid of them and use the generic fallbacks. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-29oprofile: Remove deprecated use of flush_scheduled_work()Tejun Heo
flush_scheduled_work() is deprecated and scheduled to be removed. sync_stop() currently cancels cpu_buffer works inside buffer_mutex and flushes the system workqueue outside. Instead, split end_cpu_work() into two parts - stopping further work enqueues and flushing works - and do the former inside buffer_mutex and latter outside. For stable kernels v2.6.35.y and v2.6.36.y. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@kernel.org Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-10-29oprofile: Fix the hang while taking the cpu offlineSantosh Shilimkar
The kernel build with CONFIG_OPROFILE and CPU_HOTPLUG enabled. The oprofile is initialised using system timer in absence of hardware counters supports. Oprofile isn't started from userland. In this setup while doing a CPU offline the kernel hangs in infinite for loop inside lock_hrtimer_base() function This happens because as part of oprofile_cpu_notify(, it tries to stop an hrtimer which was never started. These per-cpu hrtimers are started when the oprfile is started. echo 1 > /dev/oprofile/enable This problem also existwhen the cpu is booted with maxcpus parameter set. When bringing the remaining cpus online the timers are started even if oprofile is not yet enabled. This patch fix this issue by adding a state variable so that these hrtimer start/stop is only attempted when oprofile is started For stable kernels v2.6.35.y and v2.6.36.y. Reported-by: Jan Sebastien <s-jan@ti.com> Tested-by: sricharan <r.sricharan@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: stable@kernel.org Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-10-29braino in internal.hAl Viro
wrong return type... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-29sh: mach-microdev: SuperIO-relative ioport mapping.Paul Mundt
The microdev only has to contend with silly PIO mangling on anything within the SuperIO range. As each of the SuperIO modules is already speciail cased, we just shift that logic over to the ioport map. With microdev PCI never being merged (and being fudamentally broken in hardware), and the ethernet chip only doing 16-bit accesses already, there's no need to maintain any of the extra special casing. Kill it all off. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-29convert simple cases of nfs-related ->get_sb() to ->mount()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-29convert btrfsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-29convert cephAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-29convert gfs2Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-29convert afsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-29convert ecryptfsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-29convert sysfsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-29convert cgroup and cpusetAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-29switch get_sb_ns() usersAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-29switch procfs to ->mount()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-29setting ->proc_mnt doesn't belong in proc_get_sb()Al Viro
take that to kern_mount_data()-using callers Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-29convert cifsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-29convert nilfsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-29switch logfs to ->mount()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-29logfs: fix a leak in get_sbAl Viro
a) switch ->put_device() to logfs_super * b) actually call it on early failures in logfs_get_sb_device() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-29logfs get_sb, part 3Al Viro
take logfs_get_sb_device() calls to logfs_get_sb() itself Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-29logfs get_sb, part 2Al Viro
take setting s_bdev/s_mtd/s_devops to callers of logfs_get_sb_device(), don't bother passing them separately Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-29logfs get_sb massage, part 1Al Viro
move allocation of logfs_super to logfs_get_sb, pass it to logfs_get_sb_...(). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-29convert v9fsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-29convert ubifsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-29convert get_sb_pseudo() usersAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-29convert get_sb_nodev() usersAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-29convert get_sb_single() usersAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-29convert get_sb_mtd() users to ->mount()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-29new helper: mount_bdev()Al Viro
... and switch of the obvious get_sb_bdev() users to ->mount() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-29beginning of transtion: ->mount()Al Viro
eventual replacement for ->get_sb() - does *not* get vfsmount, return ERR_PTR(error) or root of subtree to be mounted. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-29fix open/umount raceAl Viro
nameidata_to_filp() drops nd->path or transfers it to opened file. In the former case it's a Bad Idea(tm) to do mnt_drop_write() on nd->path.mnt, since we might race with umount and vfsmount in question might be gone already. Fix: don't drop it, then... IOW, have nameidata_to_filp() grab nd->path in case it transfers it to file and do path_drop() in callers. After they are through with accessing nd->path... Reported-by: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-29a couple of open-coded ihold() introduced by nfs mergeAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-29x86-32: Restore irq stacks NUMA-aware allocationsEric Dumazet
Commit 22d4cd4c4d ("Allocate irq stacks seperate from percpu area") removed NUMA affinity of IRQ stacks as side-effect of the fix. Using alloc_pages_node() instead of __get_free_pages() is safe, even if the target node has no available LOWMEM pages : alloc_pages_node() fallbacks to another node. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Brian Gerst <brgerst@gmail.com> Cc: tj@kernel.org Cc: torvalds@linux-foundation.org Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1288276854.2649.607.camel@edumazet-laptop> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-10-29md: tidy up device searches in read_balance.NeilBrown
The code for searching through the device list to read-balance in raid1 is rather clumsy and hard to follow. Try to simplify it a bit. No important functionality change here. Signed-off-by: NeilBrown <neilb@suse.de>
2010-10-29md/raid1: fix some typos in comments.NeilBrown
Signed-off-by: NeilBrown <neilb@suse.de>
2010-10-29md/raid1: discard unused variable.NeilBrown
This structure field (flushing_bio_list) is never used, so remove it. Signed-off-by: NeilBrown <neilb@suse.de>
2010-10-29md: unplug writes to external bitmaps.NeilBrown
When writing to an 'external' bitmap we don't currently unplug the device before waiting, so we can get a 3msec delay each time; So use REQ_UNPLUG to force and unplug. Signed-off-by: NeilBrown <neilb@suse.de>
2010-10-28x86, uv: More Westmere support on SGI UVRuss Anderson
Enable Westmere support for all APIC modes on SGI UV. Signed-off-by: Russ Anderson <rja@sgi.com> LKML-Reference: <20101028224132.GB15804@sgi.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-10-28Input: bu21013_ts - fix null dereference in error handlingDan Carpenter
bu21013_data could be NULL so better not reference it. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-10-28Input: ad7879 - prevent invalid finger data reportsMichael Hennerich
Considering following scenario - the touch is present on the screen at the beginning of the last conversion sequence, but by the time the last sequence is finished, the finger is lift off. The AD7879 data available interrupt signals (DAV) completion, however some X,Y values are not valid because the screen inputs were floating during the acquisition. The AD7877 acts differently here, since it only asserts DAV if the touch is still present when the conversion sequence finished. Based on the fact that this can only happen in the last sample of the repeated conversion sequence, we simply skip the last (short glitches are filtered by the AD7879 internal median and average filters). This doesn't cause noticeable side effects, since the minimum conversion interval is 9.44ms. We receive ~100 waypoint samples per second, so we simply delay the result by 9.44ms. We also reject samples where pressure is greater than pressure_max. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-10-29kconfig: Have streamline_config process menuconfigs tooSteven Rostedt
Some menuconfigs in the Kconfig files have prompts and dependencies. Currently, streamline_config misses these, and this can cause streamline_config to keep modules enabled that should not be, and even worse, not enable those that should. This patch makes streamline_config process menuconfigs just like it would process a config. Reported-by: member graysky <graysky@archlinux.us> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-10-29kconfig: Fix streamline_config to read multi line deps in Kconfig filesSteven Rostedt
I noticed that some Kconfig files have multi line dependencies that continue with a backslash. Those dependencies on the next line will be missed by streamline_config. For example: config CS89x0 tristate "CS89x0 support" depends on NET_ETHERNET && (ISA || EISA || MACH_IXDP2351 \ || ARCH_IXDP2X01 || MACH_MX31ADS) The "|| ARCH_IXDP2X01 || MACH_MX31ADS)" will not be processed. This patch adds code to handle this case. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-10-29kconfig: Fix missing declaration of variable $dir in streamline_config.plhiromu
On Fri, Aug 17, 2010 at 01:43PM +0800, Américo Wang wrote: > Acked-by: WANG Cong <xiyou.wangcong@gmail.com> > > BTW, I think we should add "use strict;" too. Then I added "use strict;" to streamline_config.pl, I saw another warning. > Global symbol "$dir" requires explicit package name at scripts/kconfig/streamline_config.pl line 286. > Global symbol "$dir" requires explicit package name at scripts/kconfig/streamline_config.pl line 287. > Global symbol "$dir" requires explicit package name at scripts/kconfig/streamline_config.pl line 288. Then I added "my $dir;" to line 285. Cc: Américo Wang <xiyou.wangcong@gmail.com> Cc: Toralf Foerster <toralf.foerster@gmx.de> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Hiromu Yakura <hiromu1996@gmail.com> LKML-Reference: <1282042158.7160.9.camel@hiromu-Macbook> [ changed to just add my in front of $dir instead of new line ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-10-29kconfig: Fix variable name typo %prompts in streamline_config.plhiromu yagura
When I added "use strict;" to streamline_config.pl, I saw the following warnings: > Global symbol "%prompt" requires explicit package name at scripts/kconfig/streamline_config.pl line 183. > Global symbol "%prompt" requires explicit package name at scripts/kconfig/streamline_config.pl line 368. The declaration of %prompt was incorrect, and should have been %prompts. Cc: Toralf Foerster <toralf.foerster@gmx.de> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Hiromu Yakura <hiromu1996@gmail.com> LKML-Reference: <1281845597.11566.5.camel@camp10-laptop> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-10-29kconfig: Make localmodconfig handle environment variablesSteven Rostedt
The commit 838a2e55e6a4e9e8a10451ed2ef0f7a08dabdb04 kbuild: migrate all arch to the kconfig mainmenu upgrade Broke make localmodconfig. The reason was that it added a environment variable to the kconfig source, which the streamline_config.pl could not handle. This patch changes streamline_config.pl to handle kconfig sources using environment variables in their names. Cc: Arnaud Lacombe <lacombar@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Michal Marek <mmarek@suse.cz> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-10-29cifs: Cleanup and thus reduce smb session structure and fields used during ↵Shirish Pargaonkar
authentication Removed following fields from smb session structure cryptkey, ntlmv2_hash, tilen, tiblob and ntlmssp_auth structure is allocated dynamically only if the auth mech in NTLMSSP. response field within a session_key structure is used to initially store the target info (either plucked from type 2 challenge packet in case of NTLMSSP or fabricated in case of NTLMv2 without extended security) and then to store Message Authentication Key (mak) (session key + client response). Server challenge or cryptkey needed during a NTLMSSP authentication is now part of ntlmssp_auth structure which gets allocated and freed once authenticaiton process is done. Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-10-29NTLM auth and sign - Use appropriate server challengeShirish Pargaonkar
Need to have cryptkey or server challenge in smb connection (struct TCP_Server_Info) for ntlm and ntlmv2 auth types for which cryptkey (Encryption Key) is supplied just once in Negotiate Protocol response during an smb connection setup for all the smb sessions over that smb connection. For ntlmssp, cryptkey or server challenge is provided for every smb session in type 2 packet of ntlmssp negotiation, the cryptkey provided during Negotiation Protocol response before smb connection does not count. Rename cryptKey to cryptkey and related changes. Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
generated by cgit (git 2.34.1) at 2025-09-14 06:10:54 +0000