summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-01-22soc: fsl: guts: Add a NULL check for devm_kasprintf()Fabio Estevam
devm_kasprintf() may fail, so we should better add a NULL check and propagate an error on failure. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2018-01-22f2fs: allow to recover node blocks given updated checkpointJaegeuk Kim
If fsck.f2fs changes crc, we have no way to recover some inode blocks by roll- forward recovery. Let's relax the condition to recover them. Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-01-22f2fs: recover some i_inline flagsJaegeuk Kim
This fixes lost i_inline flags during roll-forward. Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-01-22f2fs: correct removexattr behavior for null valued extended attributeDaeho Jeong
__vfs_removexattr() transfers "NULL" value to the setxattr handler of the f2fs filesystem in order to remove the extended attribute. But, __f2fs_setxattr() just ignores the removal request when the value of the extended attribute is already NULL. We have to remove the extended attribute itself even if the value of that is already NULL. We can reporduce this bug with the below: 1. touch file 2. setfattr -n "user.foo" file 3. setfattr -x "user.foo" file 4. getfattr -d file > user.foo Signed-off-by: Daeho Jeong <daeho.jeong@samsung.com> Signed-off-by: Youngjin Gil <youngjin.gil@samsung.com> Tested-by: Hobin Woo <hobin.woo@samsung.com> Tested-by: Chao Yu <yuchao0@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-01-22f2fs: drop page cache after fs shutdownChao Yu
Don't remain dirtied page cache in f2fs after shutdown, it can mitigate memory pressure of whole system, in order to keep other modules working properly. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-01-22f2fs: stop gc/discard thread after fs shutdownChao Yu
Once filesystem shuts down, daemons like gc/discard thread should be aware of it, and do exit, in addtion, drop all cached pending discard commands and turn off real-time discard mode. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-01-22f2fs: hanlde error case in f2fs_ioc_shutdownChao Yu
This patch makes f2fs_ioc_shutdown handling error case correctly. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-01-22f2fs: split need_inplace_updateChao Yu
This patch splits need_inplace_update to two functions: a. should_update_inplace() includes all conditions that we must use IPU. b. should_update_outplace() includes all conditions that we must use OPU. So that, in f2fs_ioc_set_pin_file() and f2fs_defragment_range(), we can use corresponding function to check whether we can trigger OPU/IPU or not. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-01-22f2fs: fix to update last_disk_size correctlyChao Yu
This patch fixes to update last_disk_size only when writing out page successfully. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-01-22f2fs: kill F2FS_INLINE_XATTR_ADDRS for cleanupChao Yu
Use get_inline_xattr_addrs directly instead of F2FS_INLINE_XATTR_ADDRS. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-01-22f2fs: clean up error path of fill_superChao Yu
This patch cleans up error path of fille_super to avoid unneeded release step. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-01-22f2fs: avoid hungtask when GC encrypted block if io_bits is setSheng Yong
When io_bits is set, GCing encrypted block may hit the following hungtask. Since io_bits requires aligned block address, f2fs_submit_page_write may return -EAGAIN if new_blkaddr does not satisify io_bits alignment. As a result, the encrypted page will never be writtenback. This patch makes move_data_block aware the EAGAIN error and cancel the writeback. [ 246.751371] INFO: task kworker/u4:4:797 blocked for more than 90 seconds. [ 246.752423] Not tainted 4.15.0-rc4+ #11 [ 246.754176] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 246.755336] kworker/u4:4 D25448 797 2 0x80000000 [ 246.755597] Workqueue: writeback wb_workfn (flush-7:0) [ 246.755616] Call Trace: [ 246.755695] ? __schedule+0x322/0xa90 [ 246.755761] ? blk_init_request_from_bio+0x120/0x120 [ 246.755773] ? pci_mmcfg_check_reserved+0xb0/0xb0 [ 246.755801] ? __radix_tree_create+0x19e/0x200 [ 246.755813] ? delete_node+0x136/0x370 [ 246.755838] schedule+0x43/0xc0 [ 246.755904] io_schedule+0x17/0x40 [ 246.755939] wait_on_page_bit_common+0x17b/0x240 [ 246.755950] ? wake_page_function+0xa0/0xa0 [ 246.755961] ? add_to_page_cache_lru+0x160/0x160 [ 246.755972] ? page_cache_tree_insert+0x170/0x170 [ 246.755983] ? __lru_cache_add+0x96/0xb0 [ 246.756086] __filemap_fdatawait_range+0x14f/0x1c0 [ 246.756097] ? wait_on_page_bit_common+0x240/0x240 [ 246.756120] ? __wake_up_locked_key_bookmark+0x20/0x20 [ 246.756167] ? wait_on_all_pages_writeback+0xc9/0x100 [ 246.756179] ? __remove_ino_entry+0x120/0x120 [ 246.756192] ? wait_woken+0x100/0x100 [ 246.756204] filemap_fdatawait_range+0x9/0x20 [ 246.756216] write_checkpoint+0x18a1/0x1f00 [ 246.756254] ? blk_get_request+0x10/0x10 [ 246.756265] ? cpumask_next_and+0x43/0x60 [ 246.756279] ? f2fs_sync_inode_meta+0x160/0x160 [ 246.756289] ? remove_element.isra.4+0xa0/0xa0 [ 246.756300] ? __put_compound_page+0x40/0x40 [ 246.756310] ? f2fs_sync_fs+0xec/0x1c0 [ 246.756320] ? f2fs_sync_fs+0x120/0x1c0 [ 246.756329] f2fs_sync_fs+0x120/0x1c0 [ 246.756357] ? trace_event_raw_event_f2fs__page+0x260/0x260 [ 246.756393] ? ata_build_rw_tf+0x173/0x410 [ 246.756397] f2fs_balance_fs_bg+0x198/0x390 [ 246.756405] ? drop_inmem_page+0x230/0x230 [ 246.756415] ? ahci_qc_prep+0x1bb/0x2e0 [ 246.756418] ? ahci_qc_issue+0x1df/0x290 [ 246.756422] ? __accumulate_pelt_segments+0x42/0xd0 [ 246.756426] ? f2fs_write_node_pages+0xd1/0x380 [ 246.756429] f2fs_write_node_pages+0xd1/0x380 [ 246.756437] ? sync_node_pages+0x8f0/0x8f0 [ 246.756440] ? update_curr+0x53/0x220 [ 246.756444] ? __accumulate_pelt_segments+0xa2/0xd0 [ 246.756448] ? __update_load_avg_se.isra.39+0x349/0x360 [ 246.756452] ? do_writepages+0x2a/0xa0 [ 246.756456] do_writepages+0x2a/0xa0 [ 246.756460] __writeback_single_inode+0x70/0x490 [ 246.756463] ? check_preempt_wakeup+0x199/0x310 [ 246.756467] writeback_sb_inodes+0x2a2/0x660 [ 246.756471] ? is_empty_dir_inode+0x40/0x40 [ 246.756474] ? __writeback_single_inode+0x490/0x490 [ 246.756477] ? string+0xbf/0xf0 [ 246.756480] ? down_read_trylock+0x35/0x60 [ 246.756484] __writeback_inodes_wb+0x9f/0xf0 [ 246.756488] wb_writeback+0x41d/0x4b0 [ 246.756492] ? writeback_inodes_wb.constprop.55+0x150/0x150 [ 246.756498] ? set_worker_desc+0xf7/0x130 [ 246.756502] ? current_is_workqueue_rescuer+0x60/0x60 [ 246.756511] ? _find_next_bit+0x2c/0xa0 [ 246.756514] ? wb_workfn+0x400/0x5d0 [ 246.756518] wb_workfn+0x400/0x5d0 [ 246.756521] ? finish_task_switch+0xdf/0x2a0 [ 246.756525] ? inode_wait_for_writeback+0x30/0x30 [ 246.756529] process_one_work+0x3a7/0x6f0 [ 246.756533] worker_thread+0x82/0x750 [ 246.756537] kthread+0x16f/0x1c0 [ 246.756541] ? trace_event_raw_event_workqueue_work+0x110/0x110 [ 246.756544] ? kthread_create_worker_on_cpu+0xb0/0xb0 [ 246.756548] ret_from_fork+0x1f/0x30 Signed-off-by: Sheng Yong <shengyong1@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-01-22f2fs: allow quota to use reserved blocksJaegeuk Kim
This patch allows quota to use reserved blocks all the time. Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-01-22f2fs: fix to drop all inmem pages correctlyChao Yu
In commit 57864ae5ce3a ("f2fs: limit # of inmemory pages"), we have limited memory footprint of all inmem pages with 20% of total memory, otherwise, if we exceed the threshold, we will try to drop all inmem pages to avoid excessive memory pressure resulting in performance regression. But in some unrelated error paths, we will also drop all inmem pages, which should be wrong, fix it in this patch. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-01-22f2fs: speed up defragment on sparse fileChao Yu
We have supported to get next page offset with valid mapping crossing hole in f2fs_map_blocks, utilizing it to speed up defragment on sparse file. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-01-22f2fs: support F2FS_IOC_PRECACHE_EXTENTSChao Yu
This patch introduces a new ioctl F2FS_IOC_PRECACHE_EXTENTS to precache extent info like ext4, in order to gain better performance during triggering AIO by eliminating synchronous waiting of mapping info. Referred commit: 7869a4a6c5ca ("ext4: add support for extent pre-caching") In addition, with newly added extent precache abilitiy, this patch add to support FIEMAP_FLAG_CACHE in ->fiemap. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-01-22f2fs: add an ioctl to disable GC for specific fileJaegeuk Kim
This patch gives a flag to disable GC on given file, which would be useful, when user wants to keep its block map. It also conducts in-place-update for dontmove file. Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-01-22tun: avoid calling xdp_rxq_info_unreg() twiceCong Wang
Similarly to tx ring, xdp_rxq_info is only registered when !tfile->detached, so we need to avoid calling xdp_rxq_info_unreg() twice too. The helper tun_cleanup_tx_ring() already checks for this properly, so it is correct to put xdp_rxq_info_unreg() just inside there. Reported-by: syzbot+1c788d7ce0f0888f1d7f@syzkaller.appspotmail.com Fixes: 8565d26bcb2f ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net") Cc: Jason Wang <jasowang@redhat.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-22orangefs: initialize op on loop restart in orangefs_devreq_readMartin Brandenburg
In orangefs_devreq_read, there is a loop which picks an op off the list of pending ops. If the loop fails to find an op, there is nothing to read, and it returns EAGAIN. If the op has been given up on, the loop is restarted via a goto. The bug is that the variable which the found op is written to is not reinitialized, so if there are no more eligible ops on the list, the code runs again on the already handled op. This is triggered by interrupting a process while the op is being copied to the client-core. It's a fairly small window, but it's there. Signed-off-by: Martin Brandenburg <martin@omnibond.com> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-01-22orangefs: use list_for_each_entry_safe in purge_waiting_opsMartin Brandenburg
set_op_state_purged can delete the op. Signed-off-by: Martin Brandenburg <martin@omnibond.com> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-01-22Merge branch 'net-sched-add-extack-support-for-cls-offloads'David S. Miller
Jakub Kicinski says: ==================== net: sched: add extack support for cls offloads I've dropped the tests from the series because test_offloads.py changes will conflict with bpf-next patches. I will send four more patches with tests once bpf-next is merged back, hopefully still making it into 4.16 :) v4: - rebase on top of Alex's changes. --- Quentin says: This series tries to improve user experience when eBPF hardware offload hits error paths at load time. In particular, it introduces netlink extended ack support in the nfp driver. To that aim, transmission of the pointer to the extack object is piped through the `change()` operation of the existing classifiers (patch 1 to 6). Then it is used for TC offload in the nfp driver (patch 8) and in netdevsim (patch 9, selftest in patch 10). Patch 7 adds a helper to handle extack messages in the core when TC offload is disabled on the net device. For completeness extack is propagated for classifiers other than cls_bpf, but it's up to the drivers to make use of it. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-22nfp: bpf: use extack support to improve debuggingQuentin Monnet
Use the recently added extack support for eBPF offload in the driver. Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-22nfp: bpf: plumb extack into functions related to XDP offloadQuentin Monnet
Pass a pointer to an extack object to nfp_app_xdp_offload() in order to prepare for extack usage in the nfp driver. Next step will be to forward this extack pointer to nfp_net_bpf_offload(), once this function is able to use it for printing error messages. Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-22net: sched: create tc_can_offload_extack() wrapperQuentin Monnet
Create a wrapper around tc_can_offload() that takes an additional extack pointer argument in order to output an error message if TC offload is disabled on the device. In this way, the error message is handled by the core and can be the same for all drivers. Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-22net: sched: add extack support for offload via tc_cls_common_offloadQuentin Monnet
Add extack support for hardware offload of classifiers. In order to achieve this, a pointer to a struct netlink_ext_ack is added to the struct tc_cls_common_offload that is passed to the callback for setting up the classifier. Function tc_cls_common_offload_init() is updated to support initialization of this new attribute. Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-22net: sched: cls_bpf: plumb extack support in filter for hardware offloadQuentin Monnet
Pass the extack pointer obtained in the `->change()` filter operation to cls_bpf_offload() and then to cls_bpf_offload_cmd(). This makes it possible to use this extack pointer in drivers offloading BPF programs in a future patch. Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-22net: sched: cls_u32: propagate extack support for filter offloadQuentin Monnet
Propagate the extack pointer from the `->change()` classifier operation to the function used for filter replacement in cls_u32. This makes it possible to use netlink extack messages in the future at replacement time for this filter, although it is not used at this point. Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-22net: sched: cls_matchall: propagate extack support for filter offloadQuentin Monnet
Propagate the extack pointer from the `->change()` classifier operation to the function used for filter replacement in cls_matchall. This makes it possible to use netlink extack messages in the future at replacement time for this filter, although it is not used at this point. Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-22net: sched: cls_flower: propagate extack support for filter offloadQuentin Monnet
Propagate the extack pointer from the `->change()` classifier operation to the function used for filter replacement in cls_flower. This makes it possible to use netlink extack messages in the future at replacement time for this filter, although it is not used at this point. Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-22tls: Correct length of scatterlist in tls_sw_sendpageDave Watson
The scatterlist is reused by both sendmsg and sendfile. If a sendmsg of smaller number of pages is followed by a sendfile of larger number of pages, the scatterlist may be too short, resulting in a crash in gcm_encrypt. Add sg_unmark_end to make the list the correct length. tls_sw_sendmsg already calls sg_unmark_end correctly when it allocates memory in alloc_sg, or in zerocopy_from_iter. Signed-off-by: Dave Watson <davejwatson@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-22hv_netvsc: Use the num_online_cpus() for channel limitHaiyang Zhang
Since we no longer localize channel/CPU affiliation within one NUMA node, num_online_cpus() is used as the number of channel cap, instead of the number of processors in a NUMA node. This patch allows a bigger range for tuning the number of channels. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-22be2net: restore properly promisc mode after queues reconfigurationIvan Vecera
The commit 622190669403 ("be2net: Request RSS capability of Rx interface depending on number of Rx rings") modified be_update_queues() so the IFACE (HW representation of the netdevice) is destroyed and then re-created. This causes a regression because potential promiscuous mode is not restored properly during be_open() because the driver thinks that the HW has promiscuous mode already enabled. Note that Lancer is not affected by this bug because RX-filter flags are disabled during be_close() for this chipset. Cc: Sathya Perla <sathya.perla@broadcom.com> Cc: Ajit Khaparde <ajit.khaparde@broadcom.com> Cc: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Cc: Somnath Kotur <somnath.kotur@broadcom.com> Fixes: 622190669403 ("be2net: Request RSS capability of Rx interface depending on number of Rx rings") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-22net: hns3: converting spaces into tabs to avoid checkpatch.pl warningSalil Mehta
Spaces were mistakenly used instead of tabs in some of the code related to reset functionality, which caused checkpatch.pl errors. These were missed earlier so fixing them now. Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-22net: igmp: fix source address check for IGMPv3 reportsFelix Fietkau
Commit "net: igmp: Use correct source address on IGMPv3 reports" introduced a check to validate the source address of locally generated IGMPv3 packets. Instead of checking the local interface address directly, it uses inet_ifa_match(fl4->saddr, ifa), which checks if the address is on the local subnet (or equal to the point-to-point address if used). This breaks for point-to-point interfaces, so check against ifa->ifa_local directly. Cc: Kevin Cernekee <cernekee@chromium.org> Fixes: a46182b00290 ("net: igmp: Use correct source address on IGMPv3 reports") Reported-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-22cxgb3: assign port id to net_device->dev_portArjun Vynipadath
T3 devices have different ports on same PCI function, so using dev_port to identify ports. Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-22bridge: return boolean instead of integer in br_multicast_is_routerGustavo A. R. Silva
Return statements in functions returning bool should use true/false instead of 1/0. This issue was detected with the help of Coccinelle. Fixes: 85b352693264 ("bridge: Fix build error when IGMP_SNOOPING is not enabled") Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-22net: stmmac: Fix reception of Broadcom switches tagsFlorian Fainelli
Broadcom tags inserted by Broadcom switches put a 4 byte header after the MAC SA and before the EtherType, which may look like some sort of 0 length LLC/SNAP packet (tcpdump and wireshark do think that way). With ACS enabled in stmmac the packets were truncated to 8 bytes on reception, whereas clearing this bit allowed normal reception to occur. In order to make that possible, we need to pass a net_device argument to the different core_init() functions and we are dependent on the Broadcom tagger padding packets correctly (which it now does). To be as little invasive as possible, this is only done for gmac1000 when the network device is DSA-enabled (netdev_uses_dsa() returns true). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-22Merge branch 'hns3-new-features'David S. Miller
Peng Li says: ==================== add some features to hns3 driver This patchset adds some features to hns3 driver, include the support for ethtool command -d, -p and support for manager table. [Patch 1/4] adds support for ethtool command -d, its ops is get_regs. driver will send command to command queue, and get regs number and regs value from command queue. [Patch 2/4] adds manager table initialization for hardware. [Patch 3/4] adds support for ethtool command -p. For fiber ports, driver sends command to command queue, and IMP will write SGPIO regs to control leds. [Patch 4/4] adds support for net status led for fiber ports. Net status include port speed, total rx/tx packets and link status. Driver send the status to command queue, and IMP will write SGPIO to control leds. --- Change log: V1 -> V2: 1, fix comments from Andrew Lunn, remove the patch "net: hns3: add ethtool -p support for phy device". ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-22net: hns3: add net status led support for fiber portJian Shen
Check the net status per second, include port speed, total rx/tx packets and link status. Updating the led status for fiber port. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-22net: hns3: add ethtool -p support for fiber portJian Shen
Add led location support for fiber port. The led will keep blinking when locating. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-22net: hns3: add manager table initialization for hardwareFuyun Liang
The manager table is empty by default. If it is not initialized, the management pkgs like LLDP will be dropped by hardware. Default entries need to be added to manager table. Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-22net: hns3: add support for get_regsFuyun Liang
This patch adds get_regs support for ethtool cmd. Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-22gso: validate gso_type in GSO handlersWillem de Bruijn
Validate gso_type during segmentation as SKB_GSO_DODGY sources may pass packets where the gso_type does not match the contents. Syzkaller was able to enter the SCTP gso handler with a packet of gso_type SKB_GSO_TCPV4. On entry of transport layer gso handlers, verify that the gso_type matches the transport protocol. Fixes: 90017accff61 ("sctp: Add GSO support") Link: http://lkml.kernel.org/r/<001a1137452496ffc305617e5fe0@google.com> Reported-by: syzbot+fee64147a25aecd48055@syzkaller.appspotmail.com Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-22net: qdisc_pkt_len_init() should be more robustEric Dumazet
Without proper validation of DODGY packets, we might very well feed qdisc_pkt_len_init() with invalid GSO packets. tcp_hdrlen() might access out-of-bound data, so let's use skb_header_pointer() and proper checks. Whole story is described in commit d0c081b49137 ("flow_dissector: properly cap thoff field") We have the goal of validating DODGY packets earlier in the stack, so we might very well revert this fix in the future. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Jason Wang <jasowang@redhat.com> Reported-by: syzbot+9da69ebac7dddd804552@syzkaller.appspotmail.com Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-22MIPS: MSA: Update helpers to use new asm macrosJames Hogan
Update MSA control register access helpers to use the new helpers for parsing register names and creating custom assembly macro instructions. This allows the move via $at to be dropped (saving a total of about 20 bytes of kernel code). Note, this does not alter the equivalent code in .S files, which still uses the $at trick. Signed-off-by: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@mips.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17776/
2018-01-22MIPS: XPA: Standardise readx/writex accessorsJames Hogan
Now that we are using assembler macros to implement XPA instructions on toolchains which don't support them, pass Cop0 register names to the __{readx,writex}_32bit_c0_register macros in $n format rather than register numbers. Also pass a register select which may be useful in future (for example for MemoryMapID field of WatchHi registers on I6500). This is to make them consistent with the normal Cop0 register access macros which they were originally based on. Signed-off-by: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17777/
2018-01-22MIPS: XPA: Allow use of $0 (zero) to MTHC0James Hogan
Tweak __writex_32bit_c0_register() to allow the compiler to use $0 (the zero register) as an input to the mthc0 instruction. Signed-off-by: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17774/
2018-01-22MIPS: XPA: Use XPA instructions in assemblyJames Hogan
Utilise XPA instructions MFHC0 & MTHC0 in inline assembly instead of directly encoding them with the _ASM_INSN* macros, and transparently implement these instructions as assembler macros if the toolchain doesn't support them natively, using the recently introduced assembler macro helpers. The old direct encodings were restricted to using the register $at, so this allows the extra register moves to go away (saving a grand total of 24 bytes). Signed-off-by: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17775/
2018-01-22MIPS: VZ: Pass GC0 register names in $n formatJames Hogan
Now that we are using assembler macros to implement VZ instructions on toolchains which don't support them, pass VZ guest Cop0 register names to the __{read,write}_{32bit,ulong,64bit}_gc0_register macros in $n format rather than register numbers. This is to make them consistent with the normal root Cop0 register access macros which they were originally based on. Signed-off-by: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17773/
2018-01-22MIPS: VZ: Update helpers to use new asm macrosJames Hogan
Update VZ guest register & guest TLB access helpers to use the new assembly macros for parsing register names and creating custom assembly macro instructions, which has a number of advantages: - Better code can be generated on toolchains which don't support VZ, more closely matching those which do, since there is no need to bounce values via the $at register. Some differences still remain due to the inability to safely fill branch delay slots and R6 compact branch forbidden slots with explicitly encoded instructions, resulting in some extra NOPs added by the assembler. - Some code duplication between toolchains which do and don't support VZ instructions is removed, since the helpers are only implemented once. When the toolchain doesn't implement the instruction an assembly macro implements it instead. - Instruction encodings are kept together in the source. On a generic kernel with KVM VZ support enabled this change saves about 2.5KiB of kernel code when TOOLCHAIN_SUPPORTS_VIRT=n, bringing it down to about 0.5KiB more than when TOOLCHAIN_SUPPORTS_VIRT=y on r6, and just 68 bytes more on r2. Signed-off-by: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17772/
generated by cgit (git 2.34.1) at 2025-09-23 23:09:06 +0000