summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-02-10iwlwifi: dvm: remove a wrong dependency on mEmmanuel Grumbach
This was wronly added when the dependency on IWLWIFI was removed. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=112201 Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-02-10drm/i915: fix error path in intel_setup_gmbus()Rasmus Villemoes
This fails to undo the setup for pin==0; moreover, something interesting happens if the setup failed already at pin==0. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Fixes: f899fc64cda8 ("drm/i915: use GMBUS to manage i2c links") Cc: stable@vger.kernel.org Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1455048677-19882-3-git-send-email-linux@rasmusvillemoes.dk (cherry picked from commit 2417c8c03f508841b85bf61acc91836b7b0e2560) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-02-10arm64: debug: re-enable irqs before sending breakpoint SIGTRAPWill Deacon
force_sig_info can sleep under an -rt kernel, so attempting to send a breakpoint SIGTRAP with interrupts disabled yields the following BUG: BUG: sleeping function called from invalid context at /kernel-source/kernel/locking/rtmutex.c:917 in_atomic(): 0, irqs_disabled(): 128, pid: 551, name: test.sh CPU: 5 PID: 551 Comm: test.sh Not tainted 4.1.13-rt13 #7 Hardware name: Freescale Layerscape 2085a RDB Board (DT) Call trace: dump_backtrace+0x0/0x128 show_stack+0x24/0x30 dump_stack+0x80/0xa0 ___might_sleep+0x128/0x1a0 rt_spin_lock+0x2c/0x40 force_sig_info+0xcc/0x210 brk_handler.part.2+0x6c/0x80 brk_handler+0xd8/0xe8 do_debug_exception+0x58/0xb8 This patch fixes the problem by ensuring that interrupts are enabled prior to sending the SIGTRAP if they were already enabled in the user context. Reported-by: Yang Shi <yang.shi@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-02-10drm/i915/skl: Fix typo in DPLL_CFGCR1 definitionLyude
We accidentally point both cfgcr registers for the second shared DPLL to the same location in i915_reg.h. This results in a lot of hw pipe state mismatches whenever we try to do a modeset that requires allocating the DPLL to a CRTC: [drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in dpll_hw_state.cfgcr1 (expected 0x80000168, found 0x000004a5) [drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in base.adjusted_mode.crtc_clock (expected 108000, found 49500) [drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in port_clock (expected 108000, found 49500) This usually ends up causing blank monitors, since the DPLL never can get set to the right clock. Fixes: 086f8e84a085 ("drm/i915: Prefix raw register defines with underscore") Signed-off-by: Lyude <cpaul@redhat.com> Cc: drm-intel-fixes@lists.freedesktop.org Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1454600601-21900-1-git-send-email-cpaul@redhat.com (cherry picked from commit da3b891b0fb88605bb2d16adaf1ef2a1f16403ba) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-02-10mmc: sh_mmcif: Correct TX DMA channel allocationChris Paterson
Commit 27cbd7e815a8 ("mmc: sh_mmcif: rework dma channel handling") introduced a typo causing the TX DMA channel allocation to be overwritten by the requested RX DMA channel. Fixes: 27cbd7e815a8 ("mmc: sh_mmcif: rework dma channel handling") Signed-off-by: Chris Paterson <chris.paterson2@renesas.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-02-10drm/i915/skl: Don't skip mst encoders in skl_ddi_pll_select()Lyude
We don't actually check for INTEL_OUTPUT_DP_MST at all in here, as a result we skip assigning a DPLL to any DP MST ports, which makes link training fail: [ 1442.933896] [drm:intel_power_well_enable] enabling DDI D power well [ 1442.933905] [drm:skl_set_power_well] Enabling DDI D power well [ 1442.933957] [drm:intel_mst_pre_enable_dp] 0 [ 1442.935474] [drm:intel_dp_set_signal_levels] Using signal levels 00000000 [ 1442.935477] [drm:intel_dp_set_signal_levels] Using vswing level 0 [ 1442.935480] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0 [ 1442.936190] [drm:intel_dp_set_signal_levels] Using signal levels 05000000 [ 1442.936193] [drm:intel_dp_set_signal_levels] Using vswing level 1 [ 1442.936195] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 1 [ 1442.936858] [drm:intel_dp_set_signal_levels] Using signal levels 08000000 [ 1442.936862] [drm:intel_dp_set_signal_levels] Using vswing level 2 … [ 1442.998253] [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up [ 1442.998512] [drm:intel_dp_start_link_train [i915]] *ERROR* failed to train DP, aborting After which the pipe state goes completely out of sync: [ 70.075596] [drm:check_crtc_state] [CRTC:25] [ 70.075696] [drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in ddi_pll_sel (expected 0x00000000, found 0x00000001) [ 70.075747] [drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in shared_dpll (expected -1, found 0) [ 70.075798] [drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in dpll_hw_state.ctrl1 (expected 0x00000000, found 0x00000021) [ 70.075840] [drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in dpll_hw_state.cfgcr1 (expected 0x00000000, found 0x80400173) [ 70.075884] [drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in dpll_hw_state.cfgcr2 (expected 0x00000000, found 0x000003a5) [ 70.075954] [drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in base.adjusted_mode.crtc_clock (expected 262750, found 72256) [ 70.075999] [drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in port_clock (expected 540000, found 148500) And if you're especially lucky, it keeps going downhill: [ 83.309256] Kernel panic - not syncing: Timeout: Not all CPUs entered broadcast exception handler [ 83.309265] [ 83.309265] ================================= [ 83.309266] [ INFO: inconsistent lock state ] [ 83.309267] 4.5.0-rc1Lyude-Test #265 Not tainted [ 83.309267] --------------------------------- [ 83.309268] inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. [ 83.309270] Xorg/1194 [HC0[1]:SC0[0]:HE1:SE1] takes: [ 83.309293] (&(&dev_priv->uncore.lock)->rlock){?.-...}, at: [<ffffffffa02a6073>] gen9_write32+0x63/0x400 [i915] [ 83.309293] {IN-HARDIRQ-W} state was registered at: [ 83.309297] [<ffffffff810e84f4>] __lock_acquire+0x9c4/0x1d00 [ 83.309299] [<ffffffff810ea1be>] lock_acquire+0xce/0x1c0 [ 83.309302] [<ffffffff8177d936>] _raw_spin_lock_irqsave+0x56/0x90 [ 83.309321] [<ffffffffa02a5492>] gen9_read32+0x52/0x3d0 [i915] [ 83.309332] [<ffffffffa024beea>] gen8_irq_handler+0x27a/0x6a0 [i915] [ 83.309337] [<ffffffff810fdbc1>] handle_irq_event_percpu+0x41/0x300 [ 83.309339] [<ffffffff810fdeb9>] handle_irq_event+0x39/0x60 [ 83.309341] [<ffffffff811010b4>] handle_edge_irq+0x74/0x130 [ 83.309344] [<ffffffff81009073>] handle_irq+0x73/0x120 [ 83.309346] [<ffffffff817805f1>] do_IRQ+0x61/0x120 [ 83.309348] [<ffffffff8177e6d6>] ret_from_intr+0x0/0x20 [ 83.309351] [<ffffffff815f5105>] cpuidle_enter_state+0x105/0x330 [ 83.309353] [<ffffffff815f5367>] cpuidle_enter+0x17/0x20 [ 83.309356] [<ffffffff810dbe1a>] call_cpuidle+0x2a/0x50 [ 83.309358] [<ffffffff810dc1dd>] cpu_startup_entry+0x26d/0x3a0 [ 83.309360] [<ffffffff817701da>] rest_init+0x13a/0x140 [ 83.309363] [<ffffffff81f2af8e>] start_kernel+0x475/0x482 [ 83.309365] [<ffffffff81f2a315>] x86_64_start_reservations+0x2a/0x2c [ 83.309367] [<ffffffff81f2a452>] x86_64_start_kernel+0x13b/0x14a Fixes: 82d354370189 ("drm/i915/skl: Implementation of SKL DPLL programming") Signed-off-by: Lyude <cpaul@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1454428183-994-1-git-send-email-cpaul@redhat.com (cherry picked from commit 78385cb398748debb7ea2e36d6d2001830c172bc) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-02-10pinctrl: rockchip: add support for the rk3399David Wu
The pinctrl of rk3399 is much different from other's, especially the 3bits of drive strength. Signed-off-by: David Wu <david.wu@rock-chips.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-10MIPS: Octeon: Update OCTEON_FEATURE_PCIE for Octeon IIIZubair Lutfullah Kakakhel
Currently the driver tries to probe the pci driver and oops. Add CN7XXX to case so that driver probes the pcie driver. Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Cc: david.daney@cavium.com Cc: matt.redfearn@imgtec.com Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12530/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-02-10drm/imx: Add missing DRM_FORMAT_RGB565 to ipu_plane_formatsEnrico Jorns
DRM_FORMAT_RGB565 is missing from ipu_plane_formats. The support is there, just need to make it available to userspace. Signed-off-by: Enrico Jorns <ejo@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-02-10drm/imx: notify DRM core about CRTC vblank stateLucas Stach
Make sure the DRM core is aware that there will be no vblank interrupts incoming if the CRTC is disabled. That way the core will reject any attempts from userspace to wait on a vblank event on a disabled CRTC. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-02-10gpu: ipu-v3: Reset IPU before activating IRQDavid Jander
If we don't come out of a clean reset, make sure no IRQ is fired before everything is setup by resetting the IPU before activating the interrupt handlers. Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-02-10gpu: ipu-v3: Do not bail out on missing optional port nodesPhilipp Zabel
The port nodes are documented as optional, treat them accordingly. Reported-by: Martin Fuzzey <mfuzzey@parkeon.com> Reported-by: Chris Healy <Chris.Healy@zii.aero> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Fixes: 304e6be652e2 ("gpu: ipu-v3: Assign of_node of child platform devices to corresponding ports")
2016-02-10efi: Do variable name validation tests in utf8Peter Jones
Actually translate from ucs2 to utf8 before doing the test, and then test against our other utf8 data, instead of fudging it. Signed-off-by: Peter Jones <pjones@redhat.com> Acked-by: Matthew Garrett <mjg59@coreos.com> Tested-by: Lee, Chun-Yi <jlee@suse.com> Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
2016-02-10efi: Use ucs2_as_utf8 in efivarfs instead of open coding a bad versionPeter Jones
Translate EFI's UCS-2 variable names to UTF-8 instead of just assuming all variable names fit in ASCII. Signed-off-by: Peter Jones <pjones@redhat.com> Acked-by: Matthew Garrett <mjg59@coreos.com> Tested-by: Lee, Chun-Yi <jlee@suse.com> Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
2016-02-10lib/ucs2_string: Add ucs2 -> utf8 helper functionsPeter Jones
This adds ucs2_utf8size(), which tells us how big our ucs2 string is in bytes, and ucs2_as_utf8, which translates from ucs2 to utf8.. Signed-off-by: Peter Jones <pjones@redhat.com> Tested-by: Lee, Chun-Yi <jlee@suse.com> Acked-by: Matthew Garrett <mjg59@coreos.com> Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
2016-02-10KVM: s390: bail out early on fatal signal in dirty loggingChristian Borntraeger
A KVM_GET_DIRTY_LOG ioctl might take a long time. This can result in fatal signals seemingly being ignored. Lets bail out during the dirty bit sync, if a fatal signal is pending. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-02-10KVM: s390: do not block CPU on dirty loggingChristian Borntraeger
When doing dirty logging on huge guests (e.g.600GB) we sometimes get rcu stall timeouts with backtraces like [ 2753.194083] ([<0000000000112fb2>] show_trace+0x12a/0x130) [ 2753.194092] [<0000000000113024>] show_stack+0x6c/0xe8 [ 2753.194094] [<00000000001ee6a8>] rcu_pending+0x358/0xa48 [ 2753.194099] [<00000000001f20cc>] rcu_check_callbacks+0x84/0x168 [ 2753.194102] [<0000000000167654>] update_process_times+0x54/0x80 [ 2753.194107] [<00000000001bdb5c>] tick_sched_handle.isra.16+0x4c/0x60 [ 2753.194113] [<00000000001bdbd8>] tick_sched_timer+0x68/0x90 [ 2753.194115] [<0000000000182a88>] __run_hrtimer+0x88/0x1f8 [ 2753.194119] [<00000000001838ba>] hrtimer_interrupt+0x122/0x2b0 [ 2753.194121] [<000000000010d034>] do_extint+0x16c/0x170 [ 2753.194123] [<00000000005e206e>] ext_skip+0x38/0x3e [ 2753.194129] [<000000000012157c>] gmap_test_and_clear_dirty+0xcc/0x118 [ 2753.194134] ([<00000000001214ea>] gmap_test_and_clear_dirty+0x3a/0x118) [ 2753.194137] [<0000000000132da4>] kvm_vm_ioctl_get_dirty_log+0xd4/0x1b0 [ 2753.194143] [<000000000012ac12>] kvm_vm_ioctl+0x21a/0x548 [ 2753.194146] [<00000000002b57f6>] do_vfs_ioctl+0x30e/0x518 [ 2753.194149] [<00000000002b5a9c>] SyS_ioctl+0x9c/0xb0 [ 2753.194151] [<00000000005e1ae6>] sysc_tracego+0x14/0x1a [ 2753.194153] [<000003ffb75f3972>] 0x3ffb75f3972 We should do a cond_resched in here. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-02-10KVM: s390: do not take mmap_sem on dirty log queryChristian Borntraeger
Dirty log query can take a long time for huge guests. Holding the mmap_sem for very long times can cause some unwanted latencies. Turns out that we do not need to hold the mmap semaphore. We hold the slots_lock for gfn->hva translation and walk the page tables with that address, so no need to look at the VMAs. KVM also holds a reference to the mm, which should prevent other things going away. During the walk we take the necessary ptl locks. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-02-10KVM: s390: usage hint for adapter mappingsCornelia Huck
The interface for adapter mappings was designed with code in mind that maps each address only once; let's document this. Otherwise, duplicate mappings are added to the list, which makes the code ineffective and uses up the limited amount of mapping needlessly. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-02-10KVM: s390: add documentation of KVM_S390_VM_CRYPTODavid Hildenbrand
Let's properly document KVM_S390_VM_CRYPTO and its attributes. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-02-10KVM: s390: add documentation of KVM_S390_VM_TODDavid Hildenbrand
Let's properly document KVM_S390_VM_TOD and its attributes. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-02-10KVM: s390: remove old fragment of vector registersDavid Hildenbrand
Since commit 9977e886cbbc ("s390/kernel: lazy restore fpu registers"), vregs in struct sie_page is unsed. We can safely remove the field and the definition. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-02-10KVM: s390: instruction-fetching exceptions on SIE faultsDavid Hildenbrand
On instruction-fetch exceptions, we have to forward the PSW by any valid ilc and correctly use that ilc when injecting the irq. Injection will already take care of rewinding the PSW if we injected a nullifying program irq, so we don't need special handling prior to injection. Until now, autodetection would have guessed an ilc of 0. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-02-10KVM: s390: provide prog irq ilc on SIE faultsDavid Hildenbrand
On SIE faults, the ilc cannot be detected automatically, as the icptcode is 0. The ilc indicated in the program irq will always be 0. Therefore we have to manually specify the ilc in order to tell the guest which ilen was used when forwarding the PSW. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-02-10KVM: s390: irq delivery should not rely on icptcodeDavid Hildenbrand
Program irq injection during program irq intercepts is the last candidates that injects nullifying irqs and relies on delivery to do the right thing. As we should not rely on the icptcode during any delivery (because that value will not be migrated), let's add a flag, telling prog IRQ delivery to not rewind the PSW in case of nullifying prog IRQs. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-02-10KVM: s390: clean up prog irq injection on prog irq icptsDavid Hildenbrand
__extract_prog_irq() is used only once for getting the program check data in one place. Let's combine it with an injection function to avoid a memset and to prevent misuse on injection by simplifying the interface to only have the VCPU as parameter. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-02-10KVM: s390: read the correct opcode on SIE faultsDavid Hildenbrand
Let's use our fresh new function read_guest_instr() to access guest storage via the correct addressing schema. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-02-10KVM: s390: gaccess: implement instruction fetching modeDavid Hildenbrand
When an instruction is to be fetched, special handling applies to secondary-space mode and access-register mode. The instruction is to be fetched from primary space. We can easily support this by selecting the right asce for translation. Access registers will never be used during translation, so don't include them in the interface. As we only want to read from the current PSW address for now, let's also hide that detail. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-02-10KVM: s390: gaccess: introduce access modesDavid Hildenbrand
We will need special handling when fetching instructions, so let's introduce new guest access modes GACC_FETCH and GACC_STORE instead of a write flag. An additional patch will then introduce GACC_IFETCH. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-02-10KVM: s390: migration / injection of prog irq ilcDavid Hildenbrand
We have to migrate the program irq ilc and someday we will have to specify the ilc without KVM trying to autodetect the value. Let's reuse one of the spare fields in our program irq that should always be set to 0 by user space. Because we also want to make use of 0 ilcs ("not available"), we need a validity indicator. If no valid ilc is given, we try to autodetect the ilc via the current icptcode and icptstatus + parameter and store the valid ilc in the irq structure. This has a nice effect: QEMU's making use of KVM_S390_IRQ / KVM_S390_SET_IRQ_STATE / KVM_S390_GET_IRQ_STATE for migration will directly migrate the ilc without any changes. Please note that we use bit 0 as validity and bit 1,2 for the ilc, so by applying the ilc mask we directly get the ilen which is usually what we work with. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-02-10KVM: s390: PSW forwarding / rewinding / ilc reworkDavid Hildenbrand
We have some confusion about ilc vs. ilen in our current code. So let's correctly use the term ilen when dealing with (ilc << 1). Program irq injection didn't take care of the correct ilc in case of irqs triggered by EXECUTE functions, let's provide one function kvm_s390_get_ilen() to take care of all that. Also, manually specifying in intercept handlers the size of the instruction (and sometimes overwriting that value for EXECUTE internally) doesn't make too much sense. So also provide the functions: - kvm_s390_retry_instr to retry the currently intercepted instruction - kvm_s390_rewind_psw to rewind the PSW without internal overwrites - kvm_s390_forward_psw to forward the PSW Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-02-10KVM: s390: sync of fp registers via kvm_runDavid Hildenbrand
As we already store the floating point registers in the vector save area in floating point register format when we don't have MACHINE_HAS_VX, we can directly expose them to user space using a new sync flag. The floating point registers will be valid when KVM_SYNC_FPRS is set. The fpc will also be valid when KVM_SYNC_FPRS is set. Either KVM_SYNC_FPRS or KVM_SYNC_VRS will be enabled, never both. Let's also change two positions where we access vrs, making the code easier to read and one comment superfluous. Suggested-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-02-10KVM: s390: allow sync of fp registers via vregsDavid Hildenbrand
If we have MACHINE_HAS_VX, the floating point registers are stored in the vector register format, event if the guest isn't enabled for vector registers. So we can allow KVM_SYNC_VRS as soon as MACHINE_HAS_VX is available. This can in return be used by user space to support floating point registers via struct kvm_run when the machine has vector registers. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-02-10[media] tvp5150: add internal signal generator to HW input listJavier Martinez Canillas
Some tvp5150 variants, have an internal generator that can generate a black screen output. Since this is a HW block, it should be in the HW inputs list. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-10[media] tvp5150: store dev id and rom versionJavier Martinez Canillas
Not all tvp5150 variants support the same, for example some have an internal signal generator that can output a black screen. So the device id and rom version have to be stored in the driver's state to know what variant is a given device. While being there, remove some redundant comments about the device version since there is already calls to v4l2_info() with that info. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-10[media] tvp5150: put endpoint node on errorJavier Martinez Canillas
If the parallel mbus configuration is not correct, the endpoint device node isn't currently put again in the error path. Fix it. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-10[media] v4l2-async: call registered_async after subdev registrationJavier Martinez Canillas
V4L2 sub-devices might need to do initialization that depends on being registered with a V4L2 device. As an example, sub-devices with Media Controller support may need to register entities and create pad links. Execute the registered_async callback after the sub-device has been registered with the V4L2 device so the driver can do any needed init. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-10[media] v4l2-subdev: add registered_async subdev core operationJavier Martinez Canillas
V4L2 sub-devices that are registered asynchronously have no way to know when they have been registration with a V4L2 device but they might need to take some action after this. So let's add a callback that can be executed by the V4L2 async core to allow sub-devices drivers to do any needed initialization that depends on the registration. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-10[media] tea575x: convert to libraryAndy Shevchenko
The module is used only as a library for now. Remove module init and exit routines to show this. While here, remove FSF snail address and attach EXPORT_SYMBOL() macros to corresponding functions. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-10[media] v4l2-ctrls: remove unclaimed v4l2_ctrl_add_ctrl() interfaceVladimir Zapolskiy
v4l2_ctrl_add_ctrl() interface has no users since its introduction in commit 0996517cf8ea ("V4L/DVB: v4l2: Add new control handling framework") and its functionality is covered by v4l2_ctrl_new() and derivative interfaces, so it is safe to remove the interface from the kernel. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-10[media] adv7511: add support to for the content type controlHans Verkuil
This transmitter now supports configuring the IT content type of the incoming video. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-10[media] adv7842: add support to for the content type controlHans Verkuil
This receiver now supports reading the IT content type of the incoming video. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-10[media] adv7604: add support to for the content type controlHans Verkuil
This receiver now supports reading the IT content type of the incoming video. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-10[media] DocBook media: document the new V4L2_CID_DV_RX/TX_IT_CONTENT_TYPE ↵Hans Verkuil
controls Document these new controls. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-10[media] v4l2-ctrls: add V4L2_CID_DV_RX/TX_IT_CONTENT_TYPE controlsHans Verkuil
HDMI and DisplayPort both support IT Content Type information that tells the receiver what type of material the video is, graphics such as from a PC desktop, Photo, Cinema or Game (low-latency). This patch adds controls for receivers and transmitters to get/set this information. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-10[media] media: i2c: adv7604: Use v4l2-dv-timings helpersJean-Michel Hautbois
Use the helper to enumerate and set DV timings instead of a custom code. This will ease debugging too, as it is consistent with other drivers. Signed-off-by: Jean-Michel Hautbois <jean-michel.hautbois@veo-labs.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-10[media] media: platform: vivid: vivid-osd: Remove unnecessary cast to kfreeAmitoj Kaur Chawla
Remove an unnecassary cast in the argument to kfree. Found using Coccinelle. The semantic patch used to find this is as follows: //<smpl> @@ type T; expression *f; @@ - kfree((T *)(f)); + kfree(f); //</smpl> Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-10[media] V4L: ov9650: fix control clustersGuennadi Liakhovetski
Auto-gain and auto-exposure clusters in the ov9650 driver have both a size of 2, not 3 controls. Fix this. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-10[media] media: i2c/adp1653: probe: fix erroneous return valueAnton Protopopov
The adp1653_probe() function may return positive value EINVAL which is obviously wrong. Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-10[media] media: davinci_vpfe: fix missing unlock on error in ↵Wei Yongjun
vpfe_prepare_pipeline() Add the missing unlock before return from function vpfe_prepare_pipeline() in the error handling case. video->lock is lock/unlock in function vpfe_open(), and no need to unlock it here, so remove unlock video->lock. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
generated by cgit (git 2.34.1) at 2025-09-30 12:45:59 +0000