| Age | Commit message (Collapse) | Author |
|---|
|
Some functions in the au0828 driver are only used when CONFIG_MEDIA_CONTROLLER
is enabled, and otherwise defined as empty functions:
media/usb/au0828/au0828-core.c:208:13: error: 'au0828_media_graph_notify' defined but not used [-Werror=unused-function]
media/usb/au0828/au0828-core.c:262:12: error: 'au0828_enable_source' defined but not used [-Werror=unused-function]
media/usb/au0828/au0828-core.c:412:13: error: 'au0828_disable_source' defined but not used [-Werror=unused-function]
This moves the #ifdef so the entire definitions are hidden in this case.
[mchehab@osg.samsung.com: As pointed by Shuah Khan, a return 0 can be removed]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
EMP202 chip inside Terratec Grabby (hw rev 2) seems to require some time
before accessing reliably its registers. Otherwise it returns some values
previously put on the I2C bus.
To account for that period, we delay card setup until we have a proof that
accessing AC97 registers is reliable. We get this proof by polling
AC97_RESET until the expected value is read. We also check that unrelated
registers don't return the same value. This second check handles the case
where the expected value is constantly returned no matter which register
is accessed.
Signed-off-by: Matthieu Rogez <matthieu.rogez@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Add missing prefixes for DVB, V4L, and ALSA interface types.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Switch attribute wakeup_data from binary to a text attribute.
This makes it easier to handle in userspace and allows to
use the output of tools like mode2 almost as is to set a
wakeup sequence.
Changing to a text format and values in microseconds also
makes the userspace interface independent of the setting of
SAMPLE_PERIOD in the driver.
In addition document the new sysfs attribute in
Documentation/ABI/testing/sysfs-class-rc-nuvoton.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
The plane order is YUV, not YVU.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Fix the null pointer dereference in v4l_vb2q_enable_media_source().
DVB only drivers don't have valid struct v4l2_fh pointer.
[ 548.443272] BUG: unable to handle kernel NULL pointer dereference
at 0000000000000010
[ 548.452036] IP: [<ffffffffc020ffc9>]
v4l_vb2q_enable_media_source+0x9/0x50 [videodev]
[ 548.460792] PGD b820e067 PUD bb3df067 PMD 0
[ 548.465582] Oops: 0000 [#1] SMP
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Reported-by: Olli Salonen <olli.salonen@iki.fi>
Tested-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Add device managed APIs for regmap_add_irq_chip() and
regmap_del_irq_chip() so that it can be managed by
device framework for freeing it.
This helps on following:
1. Maintaining the sequence of resource allocation and deallocation
regmap_add_irq_chip(&d);
devm_requested_threaded_irq(virq)
On free path:
regmap_del_irq_chip(d);
and then removing the irq registration.
On this case, regmap irq is deleted before the irq is free.
This force to use normal irq registration.
By using devm apis, the sequence can be maintain properly:
devm_regmap_add_irq_chip(&d);
devm_requested_threaded_irq(virq);
and resource deallocation will be done in reverse order
by device framework.
2. No need to delete the regmap_irq_chip in error path or remove
callback and hence there is less code on this path.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Rockchip_spi_set_cs could be called by spi_setup, but
spi_setup may be called by device driver after runtime suspend.
Then the spi clock is closed, rockchip_spi_set_cs may access the
spi registers, which causes cpu block in some socs.
Fixes: 64e36824b32 ("spi/rockchip: add driver for Rockchip RK3xxx")
Signed-off-by: Huibin Hong <huibin.hong@rock-chips.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
commit 23b92e4cf5fd ("regmap: remove regmap_write_bits()")
removed regmap_write_bits(), but MFD driver was using it.
So, commit e30fccd6771d ("regmap: Keep regmap_write_bits()")
turns out it, but it is using original style.
This patch uses regmap_update_bits_base() for regmap_write_bits()
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvcimm fix from Dan Williams:
"One straggling fix for NVDIMM support.
The KVM/QEMU enabling for NVDIMMs has recently reached the point where
it is able to accept some ACPI _DSM requests from a guest VM. However
they immediately found that the 4.5-rc kernel is unusable because the
kernel's 'nfit' driver fails to load upon seeing a valid "not
supported" response from the virtual BIOS for an address range scrub
command.
It is not mandatory that a platform implement address range scrubbing,
so this fix from Vishal properly treats the 'not supported' response
as 'skip scrubbing and continue loading the driver'"
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
nfit: Continue init even if ARS commands are unimplemented
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two fairly simple fixes.
One is a regression with ipr firmware loading caused by one of the
trivial patches in the last merge window which failed to strip the \n
from the file name string, so now the firmware loader no longer works
leading to a lot of unhappy ipr users; fix by stripping the \n.
The second is a memory leak within SCSI: the BLK_PREP_INVALID state
was introduced a recent fix but we forgot to account for it correctly
when freeing state, resulting in memory leakage. Add the correct
state freeing in scsi_prep_return()"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
ipr: Fix regression when loading firmware
SCSI: Free resources when we return BLKPREP_INVALID
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata fixes from Tejun Heo:
"Assorted fixes for libata drivers.
- Turns out HDIO_GET_32BIT ioctl was subtly broken all along.
- Recent update to ahci external port handling was incorrectly
marking hotpluggable ports as external making userland handle
devices connected to those ports incorrectly.
- ahci_xgene needs its own irq handler to work around a hardware
erratum. libahci updated to allow irq handler override.
- Misc driver specific updates"
* 'for-4.5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
ata: ahci: don't mark HotPlugCapable Ports as external/removable
ahci: Workaround for ThunderX Errata#22536
libata: Align ata_device's id on a cacheline
Adding Intel Lewisburg device IDs for SATA
pata-rb532-cf: get rid of the irq_to_gpio() call
libata: fix HDIO_GET_32BIT ioctl
ahci_xgene: Implement the workaround to fix the missing of the edge interrupt for the HOST_IRQ_STAT.
ata: Remove the AHCI_HFLAG_EDGE_IRQ support from libahci.
libahci: Implement the capability to override the generic ahci interrupt handler.
|
|
Pull block fixes from Jens Axboe:
"Round 2 of this. I cut back to the bare necessities, the patch is
still larger than it usually would be at this time, due to the number
of NVMe fixes in there. This pull request contains:
- The 4 core fixes from Ming, that fix both problems with exceeding
the virtual boundary limit in case of merging, and the gap checking
for cloned bio's.
- NVMe fixes from Keith and Christoph:
- Regression on larger user commands, causing problems with
reading log pages (for instance). This touches both NVMe,
and the block core since that is now generally utilized also
for these types of commands.
- Hot removal fixes.
- User exploitable issue with passthrough IO commands, if !length
is given, causing us to fault on writing to the zero
page.
- Fix for a hang under error conditions
- And finally, the current series regression for umount with cgroup
writeback, where the final flush would happen async and hence open
up window after umount where the device wasn't consistent. fsck
right after umount would show this. From Tejun"
* 'for-linus2' of git://git.kernel.dk/linux-block:
block: support large requests in blk_rq_map_user_iov
block: fix blk_rq_get_max_sectors for driver private requests
nvme: fix max_segments integer truncation
nvme: set queue limits for the admin queue
writeback: flush inode cgroup wb switches instead of pinning super_block
NVMe: Fix 0-length integrity payload
NVMe: Don't allow unsupported flags
NVMe: Move error handling to failed reset handler
NVMe: Simplify device reset failure
NVMe: Fix namespace removal deadlock
NVMe: Use IDA for namespace disk naming
NVMe: Don't unmap controller registers on reset
block: merge: get the 1st and last bvec via helpers
block: get the 1st and last bvec via helpers
block: check virt boundary in bio_will_gap()
block: bio: introduce helpers to get the 1st and last bvec
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull rdma fixes from Doug Ledford:
"Additional 4.5-rc6 fixes.
I have four patches today. I had previously thought I had submitted
two of them last week, but they were accidentally skipped :-(.
- One fix to an error path in the core
- One fix for RoCE in the core
- Two related fixes for the core/mlx5"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
IB/core: Use GRH when the path hop-limit > 0
IB/{core, mlx5}: Fix input len in vendor part of create_qp/srq
IB/mlx5: Avoid using user-index for SRQs
IB/core: Fix missed clean call in registration path
|
|
Pull drm fixes from Dave Airlie:
"This contains one i915 patch twice, as I merged it locally for
testing, and then pulled some stuff in on top, and then Jani sent to
me, I didn't think it was worth redoing all the merges of what I had
tested.
Summary:
- amdgpu/radeon fixes for some more power management and VM races.
- Two i915 fixes, one for the a recent regression, one another power
management fix for skylake.
- Two tegra dma mask fixes for a regression.
- One ast fix for a typo I made transcribing the userspace driver,
that I'd like to get into stable so I don't forget about it"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
gpu: host1x: Set DMA ops on device creation
gpu: host1x: Set DMA mask
drm/amdgpu: return from atombios_dp_get_dpcd only when error
drm/amdgpu/cz: remove commented out call to enable vce pg
drm/amdgpu/powerplay/cz: enable/disable vce dpm independent of vce pg
drm/amdgpu/cz: enable/disable vce dpm even if vce pg is disabled
drm/amdgpu/gfx8: specify which engine to wait before vm flush
drm/amdgpu: apply gfx_v8 fixes to gfx_v7 as well
drm/amd/powerplay: send event to notify powerplay all modules are initialized.
drm/amd/powerplay: export AMD_PP_EVENT_COMPLETE_INIT task to amdgpu.
drm/radeon/pm: update current crtc info after setting the powerstate
drm/amdgpu/pm: update current crtc info after setting the powerstate
drm/i915: Balance assert_rpm_wakelock_held() for !IS_ENABLED(CONFIG_PM)
drm/i915/skl: Fix power domain suspend sequence
drm/ast: Fix incorrect register check for DRAM width
drm/i915: Balance assert_rpm_wakelock_held() for !IS_ENABLED(CONFIG_PM)
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management and ACPI fixes from Rafael Wysocki:
"Two build fixes for cpufreq drivers (including one for breakage
introduced recently) and a fix for a graph tracer crash when used over
suspend-to-RAM on x86.
Specifics:
- Prevent the graph tracer from crashing when used over suspend-to-
RAM on x86 by pausing it before invoking do_suspend_lowlevel() and
un-pausing it when that function has returned (Todd Brandt).
- Fix build issues in the qoriq and mediatek cpufreq drivers related
to broken dependencies on THERMAL (Arnd Bergmann)"
* tag 'pm+acpi-4.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM / sleep / x86: Fix crash on graph trace through x86 suspend
cpufreq: mediatek: allow building as a module
cpufreq: qoriq: allow building as module with THERMAL=m
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fix from Will Deacon:
"Arm64 fix for -rc7. Without it, our struct page array can overflow
the vmemmap region on systems with a large PHYS_OFFSET.
Nothing else on the radar at the moment, so hopefully that's it for
4.5 from us.
Summary: Ensure struct page array fits within vmemmap area"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: vmemmap: use virtual projection of linear region
|
|
Pull jffs2 fixes from David Woodhouse:
"This contains two important JFFS2 fixes marked for stable:
- a lock ordering problem between the page lock and the internal
f->sem mutex, which was causing occasional deadlocks in garbage
collection
- a scan failure causing moved directories to sometimes end up
appearing to have hard links.
There are also a couple of trivial MAINTAINERS file updates"
* tag 'for-linus-20160304' of git://git.infradead.org/linux-mtd:
MAINTAINERS: add maintainer entry for FREESCALE GPMI NAND driver
Fix directory hardlinks from deleted directories
jffs2: Fix page lock / f->sem deadlock
Revert "jffs2: Fix lock acquisition order bug in jffs2_write_begin"
MAINTAINERS: update Han's email
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs fix from Chris Mason:
"Filipe nailed down a problem where tree log replay would do some work
that orphan code wasn't expecting to be done yet, leading to BUG_ON"
* 'for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: fix loading of orphan roots leading to BUG_ON
|
|
Offending Commit: 6e94119 "mtd: nand: return consistent error codes in
ecc.correct() implementations"
The new error code was not being handled properly in double bit error
detection.
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Tested-by: Franklin S Cooper Jr <fcooper@ti.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"A feature was added in 4.3 that allowed users to filter trace points
on a tasks "comm" field. But this prevented filtering on a comm field
that is within a trace event (like sched_migrate_task).
When trying to filter on when a program migrated, this change
prevented the filtering of the sched_migrate_task.
To fix this, the event fields are examined first, and then the extra
fields like "comm" and "cpu" are examined. Also, instead of testing
to assign the comm filter function based on the field's name, the
generic comm field is given a new filter type (FILTER_COMM). When
this field is used to filter the type is checked. The same is done
for the cpu filter field.
Two new special filter types are added: "COMM" and "CPU". This allows
users to still filter the tasks comm for events that have "comm" as
one of their fields, in cases that users would like to filter
sched_migrate_task on the comm of the task that called the event, and
not the comm of the task that is being migrated"
* tag 'trace-fixes-v4.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Do not have 'comm' filter override event 'comm' field
|
|
If firmware doesn't implement any of the ARS commands, take that to
mean that ARS is unsupported, and continue to initialize regions without
bad block lists. We cannot make the assumption that ARS commands will be
unconditionally supported on all NVDIMMs.
Reported-by: Haozhong Zhang <haozhong.zhang@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Acked-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Tested-by: Haozhong Zhang <haozhong.zhang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Allow zero size updates. This makes set_memory_xx() consistent with x86, s390 and arm64 and makes apply_to_page_range() not to BUG() when loading modules.
Signed-off-by: Mika Penttilä mika.penttila@nextfour.com
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
git://anongit.freedesktop.org/tegra/linux into drm-fixes
drm/tegra: Fixes for v4.5-rc7
Two small fixes that restore PRIME support.
* tag 'drm/tegra/for-4.5-rc7' of git://anongit.freedesktop.org/tegra/linux:
gpu: host1x: Set DMA ops on device creation
gpu: host1x: Set DMA mask
|
|
Avoid sending a partially initialised `siginfo_t' structure along SIGFPE
signals issued from `do_ov' and `do_trap_or_bp', leading to information
leaking from the kernel stack.
Signed-off-by: Maciej W. Rozycki <macro@imgtec.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
* pm-cpufreq-fixes:
cpufreq: mediatek: allow building as a module
cpufreq: qoriq: allow building as module with THERMAL=m
* pm-sleep-fixes:
PM / sleep / x86: Fix crash on graph trace through x86 suspend
|
|
A function that does the same as i8254.c's muldiv64 has been added
(for KVM's own use, in fact!) in include/linux/math64.h. Use it
instead of muldiv64.
Reviewed-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add support for the format change of MClientReply/MclientCaps.
Also add code that denies access to inodes with pool_ns layouts.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
Reviewed-by: Sage Weil <sage@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2016-03-04
this is a pull request for net/master.
There is one patch from Ed Spiridonov, which increases the performance of the
mcp251x SPI CAN driver, by avoiding to write to error flag register if it's
unnecessary.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently host1x-instanciated devices have their dma_ops left to NULL,
which makes any DMA operation (like buffer import) on ARM64 fallback
to the dummy_dma_ops and fail with an error.
This patch calls of_dma_configure() with the host1x node when creating
such a device, so the proper DMA operations are set.
Suggested-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The default DMA mask covers a 32 bits address range, but host1x devices
can address a larger range on TK1 and TX1. Set the DMA mask to the range
addressable when we use the IOMMU to prevent the use of bounce buffers.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Commit 9f61668073a8d "tracing: Allow triggers to filter for CPU ids and
process names" added a 'comm' filter that will filter events based on the
current tasks struct 'comm'. But this now hides the ability to filter events
that have a 'comm' field too. For example, sched_migrate_task trace event.
That has a 'comm' field of the task to be migrated.
echo 'comm == "bash"' > events/sched_migrate_task/filter
will now filter all sched_migrate_task events for tasks named "bash" that
migrates other tasks (in interrupt context), instead of seeing when "bash"
itself gets migrated.
This fix requires a couple of changes.
1) Change the look up order for filter predicates to look at the events
fields before looking at the generic filters.
2) Instead of basing the filter function off of the "comm" name, have the
generic "comm" filter have its own filter_type (FILTER_COMM). Test
against the type instead of the name to assign the filter function.
3) Add a new "COMM" filter that works just like "comm" but will filter based
on the current task, even if the trace event contains a "comm" field.
Do the same for "cpu" field, adding a FILTER_CPU and a filter "CPU".
Cc: stable@vger.kernel.org # v4.3+
Fixes: 9f61668073a8d "tracing: Allow triggers to filter for CPU ids and process names"
Reported-by: Matt Fleming <matt@codeblueprint.co.uk>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Give a special invalid index to the root of the walk, so that we
can check the consistency of kvm_mmu_pages and mmu_page_path.
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
[Extracted from a bigger patch proposed by Guangrong. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
kvm_mmu_pages_init is doing some really yucky stuff. It is setting
up a sentinel for mmu_page_clear_parents; however, because of a) the
way levels are numbered starting from 1 and b) the way mmu_page_path
sizes its arrays with PT64_ROOT_LEVEL-1 elements, the access can be
out of bounds. This is harmless because the code overwrites up to the
first two elements of parents->idx and these are initialized, and
because the sentinel is not needed in this case---mmu_page_clear_parents
exits anyway when it gets to the end of the array. However ubsan
complains, and everyone else should too.
This fix does three things. First it makes the mmu_page_path arrays
PT64_ROOT_LEVEL elements in size, so that we can write to them without
checking the level in advance. Second it disintegrates kvm_mmu_pages_init
between mmu_unsync_walk (to reset the struct kvm_mmu_pages) and
for_each_sp (to place the NULL sentinel at the end of the current path).
This is okay because the mmu_page_path is only used in
mmu_pages_clear_parents; mmu_pages_clear_parents itself is called within
a for_each_sp iterator, and hence always after a call to mmu_pages_next.
Third it changes mmu_pages_clear_parents to just use the sentinel to
stop iteration, without checking the bounds on level.
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Reported-by: Mike Krinkin <krinkin.m.u@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The goto and temporary variable are unnecessary, just use return
statements.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Reviewed-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
For the kvm_is_error_hva, ubsan complains if the uninitialized writable
is passed to __direct_map, even though the value itself is not used
(__direct_map goes to mmu_set_spte->set_spte->set_mmio_spte but never
looks at that argument).
Ensuring that __gfn_to_pfn_memslot initializes *writable is cheap and
avoids this kind of issue.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes:
User visible changes:
- Check existence of frontend/backed stalled cycles in 'perf stat' (Andi Kleen)
- Implement CSV metrics output in 'perf stat' (Andi Kleen)
- Support metrics in 'perf stat' --per-core/socket mode (Andi Kleen)
- Avoid installing .o files from tools/lib/ into the python extension (Jiri Olsa)
- Rename the tracepoint '/format' field that carries the syscall ID from 'nr',
that is also the name of some syscalls arguments, to "__syscall_nr", to
avoid having multiple fields with the same name, that was breaking the
python script skeleton generator from perf.data files (Taeung Song)
- Support converting data from bpf events in 'perf data' (Wang Nan)
- Fix segfault in 'perf test' hists related entries (Arnaldo Carvalho de Melo)
- Fix output of %llu for 64 bit values read on 32 bit machines in libtraceevent (Steven Rostedt)
- Fix time stamp rounding issue in libtraceevent (Chaos.Chen)
Infrastructure changes:
- Fix setlocale() breakage in the pmu parsing code (Jiri Olsa)
- Split libtraceevent's pevent_print_event() (Steven Rostedt)
- Librarize some 'perf record' bits to allow handling multiple perf.data
files per session (Wang Nan)
- Ensure return non-zero rc when mmap fails in 'perf record' (Wang Nan)
- Fix double free on 'command_line' in a error path in 'perf script' (Colin Ian King)
- Initialize struct sigaction 'sa_flags' field in a 'perf test' entry (Colin Ian King)
- Fix various build warnings in turbostat, detected with gcc6 (Colin Ian King)
- Use .s extension for preprocessed assembler code (Masahiro Yamada)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The newly added functions have an extra semicolon, which
prevents compilation, and they need to be marked inline:
In file included from ../include/media/tuner.h:23:0,
from ../drivers/media/tuners/tuner-simple.c:10:
../include/media/v4l2-mc.h:233:1: error: expected identifier or '(' before '{' token
Remove spurious return, remove copy-and-pasted semi-colons, add static
inline.
Fixes: a77bf7048add ("v4l2-mc.h: Add stubs for the V4L2 PM/pipeline routines")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Document possible races between readers and concurrent update to the
ioctl.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
We can do it just once.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
channels has offset 0 and correct size now, but that can change.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
PIT is known at that point.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
kvm isn't ever used and pit can be accessed with container_of.
If you *really* need kvm, pit_state_to_pit(ps)->kvm.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Could be easier to read, but git history will become deeper.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Locks are gone, so we don't need to duplicate error paths.
Use goto everywhere.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Discard policy doesn't rely on information from notifiers, so we don't
need to register notifiers unconditionally. We kept correct counts in
case userspace switched between policies during runtime, but that can be
avoided by reseting the state.
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
- kvm_create_pit had to lock only because it exposed kvm->arch.vpit very
early, but initialization doesn't use kvm->arch.vpit since the last
patch, so we can drop locking.
- kvm_free_pit is only run after there are no users of KVM and therefore
is the sole actor.
- Locking in kvm_vm_ioctl_reinject doesn't do anything, because reinject
is only protected at that place.
- kvm_pit_reset isn't used anywhere and its locking can be dropped if we
hide it.
Removing useless locking allows to see what actually is being protected
by PIT state lock (values accessible from the guest).
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
