| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"One regression fix to TRIM ioctl.
The range cannot be used as its meaning can be confusing regarding
physical and logical addresses. This confusion in code led to
potential corruptions when the range overlapped data.
The original patch made it to several stable kernels and was promptly
reverted, the version for master branch is different due to additional
changes but the change is effectively the same"
* tag 'for-5.2-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: Always trim all unallocated space in btrfs_trim_free_extents
|
|
There are several scenarios that keyboard can NOT wake up system
from suspend, e.g., if a keyboard is depressed between system
device suspend phase and device noirq suspend phase, the keyboard
ISR will be called and both keyboard depress and release interrupts
will be disabled, then keyboard will no longer be able to wake up
system. Another scenario would be, if a keyboard is kept depressed,
and then system goes into suspend, the expected behavior would be
when keyboard is released, system will be waked up, but current
implementation can NOT achieve that, because both depress and release
interrupts are disabled in ISR, and the event check is still in
progress.
To fix these issues, need to make sure keyboard's depress or release
interrupt is enabled after noirq device suspend phase, this patch
moves the suspend/resume callback to noirq suspend/resume phase, and
enable the corresponding interrupt according to current keyboard status.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
These strings may come from untrusted sources (e.g. file xattrs) so they
need to be properly escaped.
Reproducer:
# setenforce 0
# touch /tmp/test
# setfattr -n security.selinux -v 'kuřecí řízek' /tmp/test
# runcon system_u:system_r:sshd_t:s0 cat /tmp/test
(look at the generated AVCs)
Actual result:
type=AVC [...] trawcon=kuřecí řízek
Expected result:
type=AVC [...] trawcon=6B75C5996563C3AD20C599C3AD7A656B
Fixes: fede148324c3 ("selinux: log invalid contexts in AVCs")
Cc: stable@vger.kernel.org # v5.1+
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Acked-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Restore the read memory barrier in __ptrace_may_access() that was deleted
a couple years ago. Also add comments on this barrier and the one it pairs
with to explain why they're there (as far as I understand).
Fixes: bfedb589252c ("mm: Add a user_ns owner to mm_struct and fix ptrace permission checks")
Cc: stable@vger.kernel.org
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
The qp priv rcd pointer doesn't match the context being used for verbs
causing issues when 9B and kdeth packets are processed by different
receive contexts and hence different CPUs.
When running on different CPUs the following panic can occur:
WARNING: CPU: 3 PID: 2584 at lib/list_debug.c:59 __list_del_entry+0xa1/0xd0
list_del corruption. prev->next should be ffff9a7ac31f7a30, but was ffff9a7c3bc89230
CPU: 3 PID: 2584 Comm: z_wr_iss Kdump: loaded Tainted: P OE ------------ 3.10.0-862.2.3.el7_lustre.x86_64 #1
Call Trace:
<IRQ> [<ffffffffb7b0d78e>] dump_stack+0x19/0x1b
[<ffffffffb74916d8>] __warn+0xd8/0x100
[<ffffffffb749175f>] warn_slowpath_fmt+0x5f/0x80
[<ffffffffb7768671>] __list_del_entry+0xa1/0xd0
[<ffffffffc0c7a945>] process_rcv_qp_work+0xb5/0x160 [hfi1]
[<ffffffffc0c7bc2b>] handle_receive_interrupt_nodma_rtail+0x20b/0x2b0 [hfi1]
[<ffffffffc0c70683>] receive_context_interrupt+0x23/0x40 [hfi1]
[<ffffffffb7540a94>] __handle_irq_event_percpu+0x44/0x1c0
[<ffffffffb7540c42>] handle_irq_event_percpu+0x32/0x80
[<ffffffffb7540ccc>] handle_irq_event+0x3c/0x60
[<ffffffffb7543a1f>] handle_edge_irq+0x7f/0x150
[<ffffffffb742d504>] handle_irq+0xe4/0x1a0
[<ffffffffb7b23f7d>] do_IRQ+0x4d/0xf0
[<ffffffffb7b16362>] common_interrupt+0x162/0x162
<EOI> [<ffffffffb775a326>] ? memcpy+0x6/0x110
[<ffffffffc109210d>] ? abd_copy_from_buf_off_cb+0x1d/0x30 [zfs]
[<ffffffffc10920f0>] ? abd_copy_to_buf_off_cb+0x30/0x30 [zfs]
[<ffffffffc1093257>] abd_iterate_func+0x97/0x120 [zfs]
[<ffffffffc10934d9>] abd_copy_from_buf_off+0x39/0x60 [zfs]
[<ffffffffc109b828>] arc_write_ready+0x178/0x300 [zfs]
[<ffffffffb7b11032>] ? mutex_lock+0x12/0x2f
[<ffffffffb7b11032>] ? mutex_lock+0x12/0x2f
[<ffffffffc1164d05>] zio_ready+0x65/0x3d0 [zfs]
[<ffffffffc04d725e>] ? tsd_get_by_thread+0x2e/0x50 [spl]
[<ffffffffc04d1318>] ? taskq_member+0x18/0x30 [spl]
[<ffffffffc115ef22>] zio_execute+0xa2/0x100 [zfs]
[<ffffffffc04d1d2c>] taskq_thread+0x2ac/0x4f0 [spl]
[<ffffffffb74cee80>] ? wake_up_state+0x20/0x20
[<ffffffffc115ee80>] ? zio_taskq_member.isra.7.constprop.10+0x80/0x80 [zfs]
[<ffffffffc04d1a80>] ? taskq_thread_spawn+0x60/0x60 [spl]
[<ffffffffb74bae31>] kthread+0xd1/0xe0
[<ffffffffb74bad60>] ? insert_kthread_work+0x40/0x40
[<ffffffffb7b1f5f7>] ret_from_fork_nospec_begin+0x21/0x21
[<ffffffffb74bad60>] ? insert_kthread_work+0x40/0x40
Fix by reading the map entry in the same manner as the hardware so that
the kdeth and verbs contexts match.
Cc: <stable@vger.kernel.org>
Fixes: 5190f052a365 ("IB/hfi1: Allow the driver to initialize QP priv struct")
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
The call to sdma_progress() is called outside the wait lock.
In this case, there is a race condition where sdma_progress() can return
false and the sdma_engine can idle. If that happens, there will be no
more sdma interrupts to cause the wakeup and the user_sdma xmit will hang.
Fix by moving the lock to enclose the sdma_progress() call.
Also, delete busycount. The need for this was removed by:
commit bcad29137a97 ("IB/hfi1: Serve the most starved iowait entry first")
Cc: <stable@vger.kernel.org>
Fixes: 7724105686e7 ("IB/hfi1: add driver files")
Reviewed-by: Gary Leshner <Gary.S.Leshner@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
The opcode range for fault injection from user should be validated before
it is applied to the fault->opcodes[] bitmap to avoid out-of-bound
error.
Cc: <stable@vger.kernel.org>
Fixes: a74d5307caba ("IB/hfi1: Rework fault injection machinery")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Stefano Brivio says:
====================
Don't assume linear buffers in error handlers for VXLAN and GENEVE
Guillaume noticed the same issue fixed by commit 26fc181e6cac ("fou, fou6:
do not assume linear skbs") for fou and fou6 is also present in VXLAN and
GENEVE error handlers: we can't assume linear buffers there, we need to
use pskb_may_pull() instead.
====================
Acked-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In commit a07966447f39 ("geneve: ICMP error lookup handler") I wrongly
assumed buffers from icmp_socket_deliver() would be linear. This is not
the case: icmp_socket_deliver() only guarantees we have 8 bytes of linear
data.
Eric fixed this same issue for fou and fou6 in commits 26fc181e6cac
("fou, fou6: do not assume linear skbs") and 5355ed6388e2 ("fou, fou6:
avoid uninit-value in gue_err() and gue6_err()").
Use pskb_may_pull() instead of checking skb->len, and take into account
the fact we later access the GENEVE header with udp_hdr(), so we also
need to sum skb_transport_header() here.
Reported-by: Guillaume Nault <gnault@redhat.com>
Fixes: a07966447f39 ("geneve: ICMP error lookup handler")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In commit c3a43b9fec8a ("vxlan: ICMP error lookup handler") I wrongly
assumed buffers from icmp_socket_deliver() would be linear. This is not
the case: icmp_socket_deliver() only guarantees we have 8 bytes of linear
data.
Eric fixed this same issue for fou and fou6 in commits 26fc181e6cac
("fou, fou6: do not assume linear skbs") and 5355ed6388e2 ("fou, fou6:
avoid uninit-value in gue_err() and gue6_err()").
Use pskb_may_pull() instead of checking skb->len, and take into account
the fact we later access the VXLAN header with udp_hdr(), so we also
need to sum skb_transport_header() here.
Reported-by: Guillaume Nault <gnault@redhat.com>
Fixes: c3a43b9fec8a ("vxlan: ICMP error lookup handler")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In order to create an internal vport, internal_dev_create() is used and
that calls register_netdevice() internally.
If register_netdevice() fails, it calls dev->priv_destructor() to free
private data of netdev. actually, a private data of this is a vport.
Hence internal_dev_create() should not free and use a vport after failure
of register_netdevice().
Test command
ovs-dpctl add-dp bonding_masters
Splat looks like:
[ 1035.667767] kasan: GPF could be caused by NULL-ptr deref or user memory access
[ 1035.675958] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
[ 1035.676916] CPU: 1 PID: 1028 Comm: ovs-vswitchd Tainted: G B 5.2.0-rc3+ #240
[ 1035.676916] RIP: 0010:internal_dev_create+0x2e5/0x4e0 [openvswitch]
[ 1035.676916] Code: 48 c1 ea 03 80 3c 02 00 0f 85 9f 01 00 00 4c 8b 23 48 b8 00 00 00 00 00 fc ff df 49 8d bc 24 60 05 00 00 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 86 01 00 00 49 8b bc 24 60 05 00 00 e8 e4 68 f4
[ 1035.713720] RSP: 0018:ffff88810dcb7578 EFLAGS: 00010206
[ 1035.713720] RAX: dffffc0000000000 RBX: ffff88810d13fe08 RCX: ffffffff84297704
[ 1035.713720] RDX: 00000000000000ac RSI: 0000000000000000 RDI: 0000000000000560
[ 1035.713720] RBP: 00000000ffffffef R08: fffffbfff0d3b881 R09: fffffbfff0d3b881
[ 1035.713720] R10: 0000000000000001 R11: fffffbfff0d3b880 R12: 0000000000000000
[ 1035.768776] R13: 0000607ee460b900 R14: ffff88810dcb7690 R15: ffff88810dcb7698
[ 1035.777709] FS: 00007f02095fc980(0000) GS:ffff88811b400000(0000) knlGS:0000000000000000
[ 1035.777709] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1035.777709] CR2: 00007ffdf01d2f28 CR3: 0000000108258000 CR4: 00000000001006e0
[ 1035.777709] Call Trace:
[ 1035.777709] ovs_vport_add+0x267/0x4f0 [openvswitch]
[ 1035.777709] new_vport+0x15/0x1e0 [openvswitch]
[ 1035.777709] ovs_vport_cmd_new+0x567/0xd10 [openvswitch]
[ 1035.777709] ? ovs_dp_cmd_dump+0x490/0x490 [openvswitch]
[ 1035.777709] ? __kmalloc+0x131/0x2e0
[ 1035.777709] ? genl_family_rcv_msg+0xa54/0x1030
[ 1035.777709] genl_family_rcv_msg+0x63a/0x1030
[ 1035.777709] ? genl_unregister_family+0x630/0x630
[ 1035.841681] ? debug_show_all_locks+0x2d0/0x2d0
[ ... ]
Fixes: cf124db566e6 ("net: Fix inconsistent teardown and release of private netdev state.")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Reviewed-by: Greg Rose <gvrose8192@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The below patch fixes an incorrect zerocopy refcnt increment when
appending with MSG_MORE to an existing zerocopy udp skb.
send(.., MSG_ZEROCOPY | MSG_MORE); // refcnt 1
send(.., MSG_ZEROCOPY | MSG_MORE); // refcnt still 1 (bar frags)
But it missed that zerocopy need not be passed at the first send. The
right test whether the uarg is newly allocated and thus has extra
refcnt 1 is not !skb, but !skb_zcopy.
send(.., MSG_MORE); // <no uarg>
send(.., MSG_ZEROCOPY); // refcnt 1
Fixes: 100f6d8e09905 ("net: correct zerocopy refcnt with udp MSG_MORE")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
[What]
readptr read always returns zero, since most likely
these blocks are either power or clock gated.
[How]
fetch rptr after amdgpu_ring_alloc() which informs
the power management code that the block is about to be
used and hence the gating is turned off.
Signed-off-by: Louis Li <Ching-shih.Li@amd.com>
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
The ioctl argument was parsed as the wrong type.
Fixes: b21d9c435f93 ("ovl: support the FS_IOC_FS[SG]ETXATTR ioctls")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
In RV32, udelay would delay the wrong cycle. When it shifts right
"UDELAY_SHIFT" bits, it either delays 0 cycle or 1 cycle. It only works
correctly in RV64. Because the 'ucycles' always needs to be 64 bits
variable.
Signed-off-by: Nick Hu <nickhu@andestech.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
[paul.walmsley@sifive.com: fixed minor spelling error]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
|
|
Booting up with DMA_API_DEBUG_SG=y generates a warning due to the driver
forgot to set dma_parms appropriately. Set it just after vmw_dma_masks()
in vmw_driver_load().
DMA-API: vmwgfx 0000:00:0f.0: mapping sg segment longer than device
claims to support [len=2097152] [max=65536]
WARNING: CPU: 2 PID: 261 at kernel/dma/debug.c:1232
debug_dma_map_sg+0x360/0x480
Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop
Reference Platform, BIOS 6.00 04/13/2018
RIP: 0010:debug_dma_map_sg+0x360/0x480
Call Trace:
vmw_ttm_map_dma+0x3b1/0x5b0 [vmwgfx]
vmw_bo_map_dma+0x25/0x30 [vmwgfx]
vmw_otables_setup+0x2a8/0x750 [vmwgfx]
vmw_request_device_late+0x78/0xc0 [vmwgfx]
vmw_request_device+0xee/0x4e0 [vmwgfx]
vmw_driver_load.cold+0x757/0xd84 [vmwgfx]
drm_dev_register+0x1ff/0x340 [drm]
drm_get_pci_dev+0x110/0x290 [drm]
vmw_probe+0x15/0x20 [vmwgfx]
local_pci_probe+0x7a/0xc0
pci_device_probe+0x1b9/0x290
really_probe+0x1b5/0x630
driver_probe_device+0xa3/0x1a0
device_driver_attach+0x94/0xa0
__driver_attach+0xdd/0x1c0
bus_for_each_dev+0xfe/0x150
driver_attach+0x2d/0x40
bus_add_driver+0x290/0x350
driver_register+0xdc/0x1d0
__pci_register_driver+0xda/0xf0
vmwgfx_init+0x34/0x1000 [vmwgfx]
do_one_initcall+0xe5/0x40a
do_init_module+0x10f/0x3a0
load_module+0x16a5/0x1a40
__se_sys_finit_module+0x183/0x1c0
__x64_sys_finit_module+0x43/0x50
do_syscall_64+0xc8/0x606
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: fb1d9738ca05 ("drm/vmwgfx: Add DRM driver for VMware Virtual GPU")
Co-developed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
|
|
Commit bf0102a0fdd9 ("riscv: call pm_power_off from machine_halt /
machine_power_off") removed the export of pm_power_off, but it is used by
several modules:
ERROR: "pm_power_off" [drivers/mfd/rk808.ko] undefined!
ERROR: "pm_power_off" [drivers/mfd/max8907.ko] undefined!
ERROR: "pm_power_off" [drivers/mfd/axp20x.ko] undefined!
ERROR: "pm_power_off" [drivers/char/ipmi/ipmi_poweroff.ko] undefined!
Signed-off-by: Andreas Schwab <schwab@suse.de>
Fixes: bf0102a0fdd9 ("riscv: call pm_power_off from machine_halt / machine_power_off")
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
|
|
When building sg tables, honor the device sg list segment size limitation.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
|
|
Enable PRCI clock driver and serial console by default, so the default
upstream defconfig is bootable to a serial console.
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
|
|
The HB port may not be available for various reasons. Either it has been
disabled by a config option or by the hypervisor for other reasons.
In that case, make sure we have a backup plan and use the backdoor port
instead with a performance penalty.
Cc: stable@vger.kernel.org
Fixes: 89da76fde68d ("drm/vmwgfx: Add VMWare host messaging capability")
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
|
|
If the leftmost parent node of the tree has does not have a child
on the left side, then trie_get_next_key (and bpftool map dump) will
not look at the child on the right. This leads to the traversal
missing elements.
Lookup is not affected.
Update selftest to handle this case.
Reproducer:
bpftool map create /sys/fs/bpf/lpm type lpm_trie key 6 \
value 1 entries 256 name test_lpm flags 1
bpftool map update pinned /sys/fs/bpf/lpm key 8 0 0 0 0 0 value 1
bpftool map update pinned /sys/fs/bpf/lpm key 16 0 0 0 0 128 value 2
bpftool map dump pinned /sys/fs/bpf/lpm
Returns only 1 element. (2 expected)
Fixes: b471f2f1de8b ("bpf: implement MAP_GET_NEXT_KEY command for LPM_TRIE")
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
This reverts commit d4b13963f217dd947da5c0cabd1569e914d21699.
The commit introduced a regression in glusterfs-fuse.
Reported-by: Sander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Check for exact and correct return value to snd_i2c_sendbytes
call for EWS/DMX 6Fire (snd_ice1712).
Fixes a systemic error on every boot starting from kernel 5.1
onwards to snd_ice1712 driver ("cannot send pca") on Terratec
EWS/DMX 6Fire PCI soundcards.
Check for exact and correct return value to snd_i2c_sendbytes
call for EWS/DMX 6Fire (snd_ice1712).
Fixes a systemic error on every boot to snd_ice1712 driver
("cannot send pca") on Terratec EWS/DMX 6Fire PCI soundcards.
Fixes: c99776cc4018 ("ALSA: ice1712: fix a missing check of snd_i2c_sendbytes")
Signed-off-by: Rui Nuno Capela <rncbc@rncbc.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Stanton SCS.1m can transfer isochronous packet with Multi Bit Linear
Audio data channels, therefore it allows software to capture PCM
substream. However, ALSA oxfw driver doesn't.
This commit changes the driver to add one PCM substream for capture
direction.
Fixes: de5126cc3c0b ("ALSA: oxfw: add stream format quirk for SCS.1 models")
Cc: <stable@vger.kernel.org> # v4.5+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The data for isochronous resources is not destroyed in expected place.
This commit fixes the bug.
Cc: <stable@vger.kernel.org> # v4.12+
Fixes: 9b2bb4f2f4a2 ("ALSA: firewire-motu: add stream management functionality")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
s390:tinyconfig fails to build with gcc 8.3.0.
arch/s390/include/asm/ctl_reg.h:52:2: error: impossible constraint in 'asm'
asm volatile( \
^~~
arch/s390/include/asm/ctl_reg.h:62:2: note: in expansion of macro '__ctl_store'
__ctl_store(reg, cr, cr);
^~~~~~~~~~~
s390/include/asm/ctl_reg.h:41:2: error: impossible constraint in 'asm'
asm volatile( \
^~~
arch/s390/include/asm/ctl_reg.h:64:2:
note: in expansion of macro '__ctl_load'
__ctl_load(reg, cr, cr);
^~~~~~~~~~
Marking __ctl_set_bit and __ctl_clear_bit as __always_inline fixes the
problem.
Fixes: 9012d011660e ("compiler: allow all arches to enable CONFIG_OPTIMIZE_INLINING")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
Get rid of gcc9 warnings like this:
arch/s390/boot/ipl_report.c: In function 'find_bootdata_space':
arch/s390/boot/ipl_report.c:42:26: warning: taking address of packed member of 'struct ipl_rb_components' may result in an unaligned pointer value [-Waddress-of-packed-member]
42 | for_each_rb_entry(comp, comps)
| ^~~~~
This is effectively the s390 variant of commit 20c6c1890455
("x86/boot: Disable the address-of-packed-member compiler warning").
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
It's not needed after [1] is applied, because usb_debug_root is created
by usb common core but not usbcore now.
[1] 812086d362a1 ("USB: move usb debugfs directory creation to the usb common core")
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Pull block cgroup symlink revert from Jens Axboe:
"I talked to Tejun about this offline, and he's not a huge fan of the
symlink.
So let's revert this for now, and Paolo can do this properly for 5.3
instead"
* tag 'for-linus-20190610' of git://git.kernel.dk/linux-block:
cgroup/bfq: revert bfq.weight symlink change
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"Just one driver specific fix here, for a boot regression introduced
during some modernization work on the tps6507x driver"
* tag 'regulator-fix-v5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: tps6507x: Fix boot regression due to testing wrong init_data pointer
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A small set of fixes here.
One core fix for error handling when we fail to set up the hardware
before initiating a transfer and another one reverting a change in the
core which broke Raspberry Pi in common use cases as part of some
optimization work.
There's also a couple of driver specific fixes"
* tag 'spi-fix-v5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: abort spi_sync if failed to prepare_transfer_hardware
spi: spi-fsl-spi: call spi_finalize_current_message() at the end
spi: bitbang: Fix NULL pointer dereference in spi_unregister_master
spi: Fix Raspberry Pi breakage
|
|
While adding handling for dying task group leaders c03cd7738a83
("cgroup: Include dying leaders with live threads in PROCS
iterations") added an inverted cset skip condition to
css_task_iter_advance_css_set(). It should skip cset if it's
completely empty but was incorrectly testing for the inverse condition
for the dying_tasks list. Fix it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: c03cd7738a83 ("cgroup: Include dying leaders with live threads in PROCS iterations")
Reported-by: syzbot+d4bba5ccd4f9a2a68681@syzkaller.appspotmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into char-misc-linus
Vinod writes:
soundwire fixes for v5.2-rc4
Srinivas Kandagatla fixed by bunch of issues, two in core for locking
and out of bound access and one in intel driver copy-paste
* tag 'soundwire-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: intel: set dai min and max channels correctly
soundwire: stream: fix bad unlock balance
soundwire: stream: fix out of boundary access on port properties
|
|
Remove unneeded variable ret in function sisusb_set_default_mode.
Change return type of sisusb_set_default_mode from int to void
as it never fails.
Issue identified by coccicheck
Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com>
-----
changes in v2: Change return type of sisusb_set_default_mode from int to
void as it never fails
changes in v3: Update changelog
----
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Panfrost depends on the simple_ondemand governor, and therefore
it's a required configuration. Select it.
Fixes: f3617b449d0b ("drm/panfrost: Select devfreq")
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190605184859.9432-1-ezequiel@collabora.com
|
|
Devfreq runtime usage was made mandatory, thus making panfrost fail to probe
on Amlogic S912 SoCs missing the "operating-points-v2" property.
Make it optional again, leaving PM_DEVFREQ selected by default.
Fixes: f3617b449d0b ("drm/panfrost: Select devfreq")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190605150233.32722-1-narmstrong@baylibre.com
|
|
Right now, the BO is mapped as a cached region when ->vmap() is called
and the underlying object is not a dmabuf.
Doing that makes cache management a bit more complicated (you'd need
to call dma_map/unmap_sg() on the ->sgt field everytime the BO is about
to be passed to the GPU/CPU), so let's map the BO with writecombine
attributes instead (as done in most drivers).
Fixes: 2194a63a818d ("drm: Add library for shmem backed GEM objects")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190529065121.13485-1-boris.brezillon@collabora.com
|
|
Our HW engineers informed us that HS400 is not working on these SoC
revisions.
Fixes: 0f4e2054c971 ("mmc: renesas_sdhi: disable HS400 on H3 ES1.x and M3-W ES1.[012]")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
When calling kmalloc with GFP_KERNEL in case CONFIG_SLOB is unset,
kmem_cache_alloc_trace is called.
In case CONFIG_TRACING is set, kmem_cache_alloc_trace will ball
slab_alloc, which will call slab_pre_alloc_hook which might_sleep_if.
The context in which it is called in this case, the
intel_sst_interrupt_mrfld, calling a sleeping kmalloc generates a BUG():
Fixes: 972b0d456e64 ("ASoC: Intel: remove GFP_ATOMIC, use GFP_KERNEL")
[ 20.250671] BUG: sleeping function called from invalid context at mm/slab.h:422
[ 20.250683] in_atomic(): 1, irqs_disabled(): 1, pid: 1791, name: Chrome_IOThread
[ 20.250690] CPU: 0 PID: 1791 Comm: Chrome_IOThread Tainted: G W 4.19.43 #61
[ 20.250693] Hardware name: GOOGLE Kefka, BIOS Google_Kefka.7287.337.0 03/02/2017
[ 20.250697] Call Trace:
[ 20.250704] <IRQ>
[ 20.250716] dump_stack+0x7e/0xc3
[ 20.250725] ___might_sleep+0x12a/0x140
[ 20.250731] kmem_cache_alloc_trace+0x53/0x1c5
[ 20.250736] ? update_cfs_rq_load_avg+0x17e/0x1aa
[ 20.250740] ? cpu_load_update+0x6c/0xc2
[ 20.250746] sst_create_ipc_msg+0x2d/0x88
[ 20.250752] intel_sst_interrupt_mrfld+0x12a/0x22c
[ 20.250758] __handle_irq_event_percpu+0x133/0x228
[ 20.250764] handle_irq_event_percpu+0x35/0x7a
[ 20.250768] handle_irq_event+0x36/0x55
[ 20.250773] handle_fasteoi_irq+0xab/0x16c
[ 20.250779] handle_irq+0xd9/0x11e
[ 20.250785] do_IRQ+0x54/0xe0
[ 20.250791] common_interrupt+0xf/0xf
[ 20.250795] </IRQ>
[ 20.250800] RIP: 0010:__lru_cache_add+0x4e/0xad
[ 20.250806] Code: 00 01 48 c7 c7 b8 df 01 00 65 48 03 3c 25 28 f1 00 00 48 8b 48 08 48 89 ca 48 ff ca f6 c1 01 48 0f 44 d0 f0 ff 42 34 0f b6 0f <89> ca fe c2 88 17 48 89 44 cf 08 80 fa 0f 74 0e 48 8b 08 66 85 c9
[ 20.250809] RSP: 0000:ffffa568810bfd98 EFLAGS: 00000202 ORIG_RAX: ffffffffffffffd6
[ 20.250814] RAX: ffffd3b904eb1940 RBX: ffffd3b904eb1940 RCX: 0000000000000004
[ 20.250817] RDX: ffffd3b904eb1940 RSI: ffffa10ee5c47450 RDI: ffffa10efba1dfb8
[ 20.250821] RBP: ffffa568810bfda8 R08: ffffa10ef9c741c1 R09: dead000000000100
[ 20.250824] R10: 0000000000000000 R11: 0000000000000000 R12: ffffa10ee8d52a40
[ 20.250827] R13: ffffa10ee8d52000 R14: ffffa10ee5c47450 R15: 800000013ac65067
[ 20.250835] lru_cache_add_active_or_unevictable+0x4e/0xb8
[ 20.250841] handle_mm_fault+0xd98/0x10c4
[ 20.250848] __do_page_fault+0x235/0x42d
[ 20.250853] ? page_fault+0x8/0x30
[ 20.250858] do_page_fault+0x3d/0x17a
[ 20.250862] ? page_fault+0x8/0x30
[ 20.250866] page_fault+0x1e/0x30
[ 20.250872] RIP: 0033:0x7962fdea9304
[ 20.250875] Code: 0f 11 4c 17 f0 c3 48 3b 15 f1 26 31 00 0f 83 e2 00 00 00 48 39 f7 72 0f 74 12 4c 8d 0c 16 4c 39 cf 0f 82 63 01 00 00 48 89 d1 <f3> a4 c3 80 fa 08 73 12 80 fa 04 73 1e 80 fa 01 77 26 72 05 0f b6
[ 20.250879] RSP: 002b:00007962f4db5468 EFLAGS: 00010206
[ 20.250883] RAX: 00003c8cc9d47008 RBX: 0000000000000000 RCX: 0000000000001b48
[ 20.250886] RDX: 0000000000002b40 RSI: 00003c8cc9551000 RDI: 00003c8cc9d48000
[ 20.250890] RBP: 00007962f4db5820 R08: 0000000000000000 R09: 00003c8cc9552b48
[ 20.250893] R10: 0000562dd1064d30 R11: 00003c8cc825b908 R12: 00003c8cc966d3c0
[ 20.250896] R13: 00003c8cc9e280c0 R14: 0000000000000000 R15: 0000000000000000
Signed-off-by: Alex Levin <levinale@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Move the client_mutex lock to snd_soc_unbind_card() before
removing link components. This prevents the deadlock
in the error path in snd_soc_instantiate_card().
Fixes: 34ac3c3eb8 (ASoC: core: lock client_mutex while removing
link components)
Reported-by: kernelci.org bot <bot@kernelci.org>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial fixes for 5.2-rc5
Here are some new device ids for option and pl2303.
All have been in linux-next with no reported issues.
Signed-off-by: Johan Hovold <johan@kernel.org>
* tag 'usb-serial-5.2-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: add Telit 0x1260 and 0x1261 compositions
USB: serial: pl2303: add Allied Telesis VT-Kit3
USB: serial: option: add support for Simcom SIM7500/SIM7600 RNDIS mode
|
|
There's some discussion on how to do this the best, and Tejun prefers
that BFQ just create the file itself instead of having cgroups support
a symlink feature.
Hence revert commit 54b7b868e826 and 19e9da9e86c4 for 5.2, and this
can be done properly for 5.3.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Active level of the mmc1 cd gpio needs to be low instead of high.
Fix PCM-953 and phyBOARD-WEGA.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
usb4_tm is unsed on dra72 and accessing the module
with ti,sysc is causing a boot crash hence disable its target
module.
Fixes: 549fce068a3112 ("ARM: dts: dra7: Add l4 interconnect hierarchy and ti-sysc data")
Reported-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Packets received at the NFP driver may be redirected to egress of another
netdev (e.g. in the case of OvS internal ports). On the egress path, some
processes, like TC egress hooks, may expect the network header offset
field in the skb to be correctly set. If this is not the case there is
potential for abnormal behaviour and even the triggering of BUG() calls.
Set the skb network header field before the mac header pull when doing a
packet redirect.
Fixes: 27f54b582567 ("nfp: allow fallback packets from non-reprs")
Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 794200d66273 ("tcp: undo cwnd on Fast Open spurious SYNACK
retransmit") may cause tcp_fastretrans_alert() to warn about pending
retransmission in Open state. This is triggered when the Fast Open
server both sends data and has spurious SYNACK retransmission during
the handshake, and the data packets were lost or reordered.
The root cause is a bit complicated:
(1) Upon receiving SYN-data: a full socket is created with
snd_una = ISN + 1 by tcp_create_openreq_child()
(2) On SYNACK timeout the server/sender enters CA_Loss state.
(3) Upon receiving the final ACK to complete the handshake, sender
does not mark FLAG_SND_UNA_ADVANCED since (1)
Sender then calls tcp_process_loss since state is CA_loss by (2)
(4) tcp_process_loss() does not invoke undo operations but instead
mark REXMIT_LOST to force retransmission
(5) tcp_rcv_synrecv_state_fastopen() calls tcp_try_undo_loss(). It
changes state to CA_Open but has positive tp->retrans_out
(6) Next ACK triggers the WARN_ON in tcp_fastretrans_alert()
The step that goes wrong is (4) where the undo operation should
have been invoked because the ACK successfully acknowledged the
SYN sequence. This fixes that by specifically checking undo
when the SYN-ACK sequence is acknowledged. Then after
tcp_process_loss() the state would be further adjusted based
in tcp_fastretrans_alert() to avoid triggering the warning in (6).
Fixes: 794200d66273 ("tcp: undo cwnd on Fast Open spurious SYNACK retransmit")
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
MPLS routing code relies on sysctl to work, so let it select PROC_SYSCTL.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Suggested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Thomas Falcon says:
====================
ibmvnic: Fixes for device reset handling
This series contains three unrelated fixes to issues seen during
device resets. The first patch fixes an error when the driver requests
to deactivate the link of an uninitialized device, resulting in a
failure to reset. Next, a patch to fix multicast transmission
failures seen after a driver reset. The final patch fixes mishandling
of memory allocation failures during device initialization, which
caused a kernel oops.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The return values for these memory allocations are unchecked,
which may cause an oops if the driver does not handle them after
a failure. Fix by checking the function's return code.
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It was observed that multicast packets were no longer received after
a device reset. The fix is to resend the current multicast list to
the backing device after recovery.
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
