summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-10-25hwmon: LTC4261 Hardware monitoring driverGuenter Roeck
This driver adds support for Linear Technology LTC4261 I2C Negative Voltage Hot Swap Controller. Reviewed-by: Ira W. Snyder <iws@ovro.caltech.edu> Reviewed-by: Tom Grennan <tom.grennan@ericsson.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-25hwmon: (lis3) add axes module parameter for custom axis-mappingTakashi Iwai
The axis-mapping of lis3dev device on many (rather most) HP machines doesn't follow the standard. When each new model appears, users need to adjust again. Testing this requires the rebuild of kernel, thus it's not trivial for end-users. This patch adds a module parameter "axes" to allow a custom axis-mapping without patching and recompiling the kernel driver. User can pass the parameter such as axes=3,2,1. Also it can be changed via sysfs. Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-by: Eric Piel <eric.piel@tremplin-utc.net> Cc: Jean Delvare <khali@linux-fr.org> Cc: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-25hwmon: (hp_accel) Add HP Mini 510x family supportMasanari Iida
This patch is an enhanced version of Takashi Iwai's [PATCH] hp_accel: Add quirks for HP ProBook 532x and HP Mini 5102 My HP Mini 5101 works fine with this patch. Confirmed with Tux Racer. Signed-off by: Masanari Iida <standby24x7@gmail.com> Acked-by: Takashi Iwai <tiwai@suse.de> Cc: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-25hwmon: (lis3) Add support for new LIS3DC / HP3DC chipTakashi Iwai
A new version of LIS3 chip has slight incompatibilities from former versions. This patch adds the minimal support for it. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-25x86/hwmon: remove inclusion of unnecessary headers from {core, pkg, ↵Jan Beulich
via-cpu}temp.c These likely originate from these drivers being clones of one another and/or other drivers which actually needed these includes. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-25x86/hwmon: (coretemp) cosmetic cleanupJan Beulich
"break" after "return" is at best bogus (good compilers even warn about the "break" being unreachable). Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-25x86/hwmon: {core, pkg, via}cpu_temp_device_remove() can all be __cpuinitJan Beulich
... as they're being called only from a __cpuinit function. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-25netfilter: fix module dependency issues with IPv6 defragmentation, ip6tables ↵KOVACS Krisztian
and xt_TPROXY One of the previous tproxy related patches split IPv6 defragmentation and connection tracking, but did not correctly add Kconfig stanzas to handle the new dependencies correctly. This patch fixes that by making the config options mirror the setup we have for IPv4: a distinct config option for defragmentation that is automatically selected by both connection tracking and xt_TPROXY/xt_socket. The patch also changes the #ifdefs enclosing IPv6 specific code in xt_socket and xt_TPROXY: we only compile these in case we have ip6tables support enabled. Signed-off-by: KOVACS Krisztian <hidden@balabit.hu> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-25[media] IR: initialize ir_raw_event in few more driversMaxim Levitsky
Few drivers still have assumption that ir_raw_event consists of duration and pulse flag. Fix that. Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-25[media] Guard a divide in v4l1 compat layerDr. David Alan Gilbert
Hi, I managed to trigger a divide by 0 in the v4l compat code with the mem2mem test module; I suspect perhaps it shouldn't have been returning a 0 pixel wide picture, but either way it seems right to guard this divide by 0 in the compatibility layer. Tested on 2.6.36 (ubuntu build, but the code in this is the same as upstream), but ***not tested with a real video device***. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> cc: stable.kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-25Merge branch 'nfs-for-2.6.37' of ↵Linus Torvalds
git://git.linux-nfs.org/projects/trondmy/nfs-2.6 * 'nfs-for-2.6.37' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: (67 commits) SUNRPC: Cleanup duplicate assignment in rpcauth_refreshcred nfs: fix unchecked value Ask for time_delta during fsinfo probe Revalidate caches on lock SUNRPC: After calling xprt_release(), we must restart from call_reserve NFSv4: Fix up the 'dircount' hint in encode_readdir NFSv4: Clean up nfs4_decode_dirent NFSv4: nfs4_decode_dirent must clear entry->fattr->valid NFSv4: Fix a regression in decode_getfattr NFSv4: Fix up decode_attr_filehandle() to handle the case of empty fh pointer NFS: Ensure we check all allocation return values in new readdir code NFS: Readdir plus in v4 NFS: introduce generic decode_getattr function NFS: check xdr_decode for errors NFS: nfs_readdir_filler catch all errors NFS: readdir with vmapped pages NFS: remove page size checking code NFS: decode_dirent should use an xdr_stream SUNRPC: Add a helper function xdr_inline_peek NFS: remove readdir plus limit ...
2010-10-25perf python scripting: Improve the syscalls-by-pid scriptArnaldo Carvalho de Melo
. Print message at script start telling how to get te summary . Print the syscall names . Accept both pid (if numeric) or COMM name Now it looks like this: [root@emilia tmp]# perf trace syscall-counts-by-pid Press control+C to stop and show the summary ^C syscall events by comm/pid: comm [pid]/syscalls count ---------------------------------------- ---------- automount [1670] futex 2 sshd [2322] rt_sigprocmask 4 select 2 write 1 read 1 perf [15178] read 2506 open 794 close 769 write 240 getdents 112 lseek 16 stat 9 perf_counter_open 5 fcntl 5 mmap 5 statfs 2 perf [15179] read 56701 open 499 stat 176 fstat 149 close 109 mmap 98 brk 75 rt_sigaction 66 munmap 42 mprotect 24 lstat 7 lseek 5 getdents 4 ioctl 3 readlink 2 futex 1 statfs 1 getegid 1 geteuid 1 getgid 1 getuid 1 getrlimit 1 fcntl 1 uname 1 write 1 [root@emilia tmp]# fg -bash: fg: current: no such job [root@emilia tmp]# perf trace syscall-counts-by-pid 2322 Press control+C to stop and show the summary ^C syscall events by comm/pid: comm [pid]/syscalls count ---------------------------------------- ---------- sshd [2322] rt_sigprocmask 4 select 2 write 1 read 1 [root@emilia tmp]# perf trace syscall-counts-by-pid sshd Press control+C to stop and show the summary ^C syscall events for sshd: comm [pid]/syscalls count ---------------------------------------- ---------- sshd [2322] rt_sigprocmask 4 select 2 write 1 read 1 [root@emilia tmp]# Cc: David S. Miller <davem@davemloft.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-10-25perf python scripting: print the syscall name on sctopArnaldo Carvalho de Melo
[root@emilia tmp]# perf trace sctop 1 syscall events: event count ---------------------------------------- ---------- read 215400 futex 4029 write 376 brk 33 rt_sigprocmask 24 select 17 lseek 2 fsync 1 ^C[root@emilia tmp]# Cc: David S. Miller <davem@davemloft.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-10-25perf python scripting: Improve the syscalls-counts scriptArnaldo Carvalho de Melo
. Print message at script start telling how to get te summary . Print the syscall name Now it looks like this: [root@emilia ~]# perf trace syscall-counts Press control+C to stop and show the summary ^C syscall events: event count ---------------------------------------- ----------- read 102752 open 1293 close 878 write 319 stat 185 fstat 149 getdents 116 mmap 98 brk 80 rt_sigaction 66 munmap 42 mprotect 24 lseek 21 lstat 7 rt_sigprocmask 4 futex 3 statfs 3 ioctl 3 readlink 2 select 2 getegid 1 geteuid 1 getgid 1 getuid 1 getrlimit 1 fcntl 1 uname 1 [root@emilia ~]# Cc: David S. Miller <davem@davemloft.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-10-25Merge branch 'omap-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (163 commits) omap: complete removal of machine_desc.io_pg_offst and .phys_io omap: UART: fix wakeup registers for OMAP24xx UART2 omap: Fix spotty MMC voltages ASoC: OMAP4: MCPDM: Remove unnecessary include of plat/control.h serial: omap-serial: fix signess error OMAP3: DMA: Errata i541: sDMA FIFO draining does not finish omap: dma: Fix buffering disable bit setting for omap24xx omap: serial: Fix the boot-up crash/reboot without CONFIG_PM OMAP3: PM: fix scratchpad memory accesses for off-mode omap4: pandaboard: enable the ehci port on pandaboard omap4: pandaboard: Fix the init if CONFIG_MMC_OMAP_HS is not set omap4: pandaboard: remove unused hsmmc definition OMAP: McBSP: Remove null omap44xx ops comment OMAP: McBSP: Swap CLKS source definition OMAP: McBSP: Fix CLKR and FSR signal muxing OMAP2+: clock: reduce the amount of standard debugging while disabling unused clocks OMAP: control: move plat-omap/control.h to mach-omap2/control.h OMAP: split plat-omap/common.c OMAP: McBSP: implement functional clock switching via clock framework OMAP: McBSP: implement McBSP CLKR and FSR signal muxing via mach-omap2/mcbsp.c ... Fixed up trivial conflicts in arch/arm/mach-omap2/ {board-zoom-peripherals.c,devices.c} as per Tony
2010-10-25perf python scripting: Improve the failed-syscalls-by-pid scriptArnaldo Carvalho de Melo
. Print message at script start telling how to get te summary . Print the syscall name using the audit-lib-python package, if installed . Print the errno string . Accept both pid (if numeric) or COMM name Now it looks like this: [root@emilia ~]# perf trace failed-syscalls-by-pid Press control+C to stop and show the summary ^C syscall errors: comm [pid] count ------------------------------ ---------- automount [1670] syscall: futex err = ETIMEDOUT 39 irqbalance [1462] syscall: openat err = ENOENT 4 perf [7888] syscall: lseek err = ESPIPE 1 syscall: open err = ENOENT 24 perf [7889] syscall: ioctl err = EINVAL 1 syscall: readlink err = EINVAL 2 syscall: open err = ENOENT 389 syscall: stat err = ENOENT 141 syscall: lseek err = ESPIPE 3 [root@emilia ~]# [root@emilia ~]# perf trace failed-syscalls-by-pid 1670 Press control+C to stop and show the summary ^C syscall errors: comm [pid] count ------------------------------ ---------- automount [1670] syscall: futex err = ETIMEDOUT 2 [root@emilia ~]# [root@emilia ~]# [root@emilia ~]# [root@emilia ~]# perf trace failed-syscalls-by-pid automount Press control+C to stop and show the summary ^C syscall errors for automount: comm [pid] count ------------------------------ ---------- automount [1669] syscall: futex err = ETIMEDOUT 1 automount [1670] syscall: futex err = ETIMEDOUT 5 [root@emilia ~]# Cc: David S. Miller <davem@davemloft.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-10-25tunnels: add _rcu annotationsEric Dumazet
(struct ip6_tnl)->next is rcu protected : (struct ip_tunnel)->next is rcu protected : (struct xfrm6_tunnel)->next is rcu protected : add __rcu annotation and proper rcu primitives. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-25net/802: add __rcu annotationsEric Dumazet
(struct net_device)->garp_port is rcu protected : (struct garp_port)->applicants is rcu protected : add __rcu annotation and proper rcu primitives. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-25ipv6: ip6_ptr rcu annotationsEric Dumazet
(struct net_device)->ip6_ptr is rcu protected : add __rcu annotation and proper rcu primitives. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-25vlan: rcu annotationsEric Dumazet
(struct net_device)->vlgrp is rcu protected : add __rcu annotation and proper rcu primitives. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-25tms380tr: Use mdelay() in tms380tr_wait().David S. Miller
This driver tries to do up to half-second udelay() calls, which overflows on x86-64. Reported-by: Andi Kleen <andi@firstfloor.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-25net: Increase xmit RECURSION_LIMIT to 10.David S. Miller
Three is definitely too low, and we know from reports that GRE tunnels stacked as deeply as 37 levels cause stack overflows, so pick some reasonable value between those two. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-25mlx4_en: Fix out of bounds array accessEli Cohen
When searching for a free entry in either mlx4_register_vlan() or mlx4_register_mac(), and there is no free entry, the loop terminates without updating the local variable free thus causing out of array bounds access. Fix this by adding a proper check outside the loop. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-25macb: Don't re-enable interrupts while in polling modeJoshua Hoke
On a busy network, the macb driver could get stuck in the interrupt handler, quickly triggering the watchdog, due to a confluence of factors: 1. macb_poll re-enables interrupts unconditionally, even when it will be called again because it exhausted its rx budget 2. macb_interrupt only disables interrupts after scheduling macb_poll, but scheduling fails when macb_poll is already scheduled because it didn't call napi_complete 3. macb_interrupt loops until the interrupt status register is clear, which will never happen in this case if the driver doesn't disable the RX interrupt Since macb_interrupt runs in interrupt context, this effectively locks up the machine, triggering the hardware watchdog. This issue was readily reproducible on a flooded network with a modified 2.6.27.48 kernel. The same problem appears to still be in the 2.6.36-rc8 driver code, so I am submitting this patch against that version. I have not tested this version of the patch except to make sure the kernel compiles. Signed-off-by: Joshua Hoke <joshua.hoke@sixnet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-25be2net: Fix CSO for UDP packetsSomnath Kotur
We're setting skb->ip_summed to CHECKSUM_NONE for all non-TCP pkts, making the stack recompute checksum.This is a bug for UDP pkts for which cso must be used. Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-25be2net: Call netif_carier_off() after register_netdev()Somnath Kotur
Calling netif_carrier_off before register_netdev was causing the network interface to miss a linkwatch pending event leading to an inconsistent state if the link is not up when interface is initialized.This is now invoked after register_netdev. Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-25cxgb3: fix device opening error pathDivy Le Ray
Only negative return from bind_qsets() should be considered an error and propagated. It fixes an issue reported by IBM on P Series platform. Signed-off-by: Divy Le Ray <divy@chelsio.com> Tested-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-25iwlwifi: quiet a noisy printkDon Fry
Timing issues in microcode for some devices can cause a compressed BA to be sent to the driver prior to returning any a-MPDU notification. Traces show RTS-CTS is exchanged and then the timer fires which causes an empty BA to be sent which acknowledges nothing. This results in a noisy printk. Only print the message if the bitmap is non-zero. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-25ath9k: resume aggregation immediately after a hardware resetFelix Fietkau
Since aggregation is usually triggered by tx completion, a hardware reset (because of beacon stuck, tx hang or baseband hang) can significantly delay the transmission of the next AMPDU (until the next tx completion event). Fix this by rescheduling aggregation after such a reset. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-25carl9170: fix scheduling while atomicChristian Lamparter
This patch fixes the following mishap: BUG: scheduling while atomic: wpa_supplicant/4164/0x00000002 Modules linked in: carl9170 mac80211 [...] Pid: 4164, comm: wpa_supplicant Not tainted 2.6.36-wl+ #119 Call Trace: [<c13779a9>] ? schedule+0x349/0x4c0 [<c13780d6>] ? schedule_timeout+0x106/0x1e0 [<c1037f50>] ? process_timeout+0x0/0x10 [<c1377e8d>] ? wait_for_common+0x9d/0x140 [<c1029110>] ? default_wake_function+0x0/0x10 [<f80c6080>] ? carl9170_exec_cmd+0xf0/0x250 [carl9170] [<f80c695e>] ? carl9170_set_mac_reg+0x5e/0x70 [carl9170] [<f80c3f76>] ? carl9170_op_add_interface+0x176/0x310 [carl9170] [...] rcu_read_unlock() call was erroneously placed after the sync. function carl9170_mod_virtual_mac. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-25mac80211: Fix ibss station got expired immediatelyRajkumar Manoharan
Station addition in ieee80211_ibss_rx_queued_mgmt is not updating sta->last_rx which is causing station expiry in ieee80211_ibss_work path. So sta addition and deletion happens repeatedly. CC: stable@kernel.org Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-25b43: N-PHY: fix infinite-loop-typoRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-25wl1251: fix module namesGrazvydas Ignotas
The wl1251 move accidently renamed wl1251_sdio and wl1251_spi modules to just sdio and spi. Restore proper module names. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Acked-by: Kalle Valo <kvalo@adurom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-25ath9k: fix handling of rate control probe framesFelix Fietkau
The ath9k aggregation code was already checking the rate control probe flag to prevent starting an aggregate frame with a sampling rate. What was missing was closing an aggregate before adding a probing frame to it. Without that, rate control cannot have precise control over probing, which delays using faster rates when the channel conditions improve. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-25ath9k: fix crash in ath_update_survey_statsFelix Fietkau
If ah->curchan is uninitialized, the channel index is bogus, which leads to invalid memory access when the cycle counters are updated. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-25ath9k_hw: Fix divide by zero cases in paprd.Senthil Balasubramanian
We are not handling all divide by zero cases in paprd. Add additional checks for divide by zero cases in papard. This patch has fixes intended for kernel 2.6.36. Cc: stable@kernel.org Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-25ath9k_hw: Fix TX carrier leakage for IEEE compliance on AR9003 2.2Luis R. Rodriguez
This updates the initvals for the AR9003 2.2 chipsets. The initvals are the initial register values we use for our registers upon hardware reset. This synchs up the initvals to match what our latest recommendation from our systems engineering team. The description of changes in this update: Improves ability to support very strong Rx conditions. Enhances DFS support for AP-mode. Improves performance of Tx carrier leak calibration. Adds support for Japan channel 14 Tx filtering requirements. Improves Tx power accuracy. Impact: Update required to address degraded throughput at very short range. Update required for AP-mode DFS certification. Update required to comply to IEEE Tx carrier leak specification. May not meet expected +/- 2 dB Tx power accuracy without update. The most important fix here would be the TX carrier leakage required to comply with IEEE 802.11 specifications. The group of changes have been tested all together in one release. References: Osprey 2.2 header file ver #33 Checksums: $ ./initvals -f ar9003-2p2 0x000000004a488fc7 ar9300_2p2_radio_postamble 0x0000000046cb1300 ar9300Modes_lowest_ob_db_tx_gain_table_2p2 0x00000000e912711f ar9300Modes_fast_clock_2p2 0x0000000037ac0ee8 ar9300_2p2_radio_core 0x00000000047a7700 ar9300Common_rx_gain_table_merlin_2p2 0x0000000003f783bb ar9300_2p2_mac_postamble 0x00000000301fc841 ar9300_2p2_soc_postamble 0x000000005ec8075f ar9200_merlin_2p2_radio_core 0x0000000083372ffa ar9300_2p2_baseband_postamble 0x00000000c4f59974 ar9300_2p2_baseband_core 0x00000000e20d2e72 ar9300Modes_high_power_tx_gain_table_2p2 0x000000007fd55c70 ar9300Modes_high_ob_db_tx_gain_table_2p2 0x0000000029495000 ar9300Common_rx_gain_table_2p2 0x0000000042cb1300 ar9300Modes_low_ob_db_tx_gain_table_2p2 0x00000000c4739cd6 ar9300_2p2_mac_core 0x000000003521a300 ar9300Common_wo_xlna_rx_gain_table_2p2 0x00000000a15ccf1b ar9300_2p2_soc_preamble 0x0000000029734396 ar9300PciePhy_pll_on_clkreq_disable_L1_2p2 0x000000002d834396 ar9300PciePhy_clkreq_enable_L1_2p2 0x0000000029834396 ar9300PciePhy_clkreq_disable_L1_2p2 $ ./initvals -f ar9003-2p2 | sha1sum 0ceddb5cf66737610fb51f04cf3e9ff71870c7b4 - Cc: stable@kernel.org Cc: Yixiang Li <yixiang.li@atheros.com> Cc: Don Breslin <don.breslin@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-25cfg80211: fix regression on processing country IEsLuis R. Rodriguez
The patch 4f366c5: wireless: only use alpha2 regulatory information from country IE removed some complex intersection we were always doing between the AP's country IE info and what we got from CRDA. When CRDA sent us back a regulatory domain we would do some sanity checks on that regulatory domain response we just got. Part of these sanity checks included checking that we already had performed an intersection for the request of NL80211_REGDOM_SET_BY_COUNTRY_IE type. This mean that cfg80211 was only processing country IEs for cases where we already had an intersection, but since we removed enforcing this this is no longer required, we should just apply the country IE country hint with the data received from CRDA. This patch has fixes intended for kernels >= 2.6.36. Cc: stable@kernel.org Reported-by: Easwar Krishnan <easwar.krishnan@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-25carl9170: fix memory leak issue in async cmd macro wrappersChristian Lamparter
This patch continues where the previous commit: "carl9170: fix async command buffer leak" left off. Similar to carl9170_reboot/carl9170_powersave, the carl9170_async_regwrite* macros would leak the temporary command buffer, if __carl9170_exec_cmd fails to upload the command to the device. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-25mac80211: don't sanitize invalid ratesChristian Lamparter
I found this bug while poking around with a pure-gn AP. Commit: cfg80211/mac80211: Use more generic bitrate mask for rate control Added some sanity checks to ensure that each tx rate index is included in the configured mask and it would change any rate indexes if it wasn't. But, the current implementation doesn't take into account that the invalid rate index "-1" has a special meaning (= no further attempts) and it should not be "changed". Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-25carl9170: fix async command buffer leakChristian Lamparter
If __carl9170_exec_cmd fails to upload an asynchronous command to the device, the functions: carl9170_reboot and carl9170_powersave will leak the temporary command assembly buffer. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-25ath5k: Properly initialize ath_common->cc_lock.Ben Greear
Otherwise, lockdep splats, at the least: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. Pid: 0, comm: swapper Not tainted 2.6.36-rc8-wl+ #32 Call Trace: [<c075d940>] ? printk+0xf/0x17 [<c045507a>] register_lock_class+0x5a/0x29e [<c0456af5>] __lock_acquire+0xa2/0xb8c [<c0455be2>] ? mark_lock+0x1e/0x1de [<c041a540>] ? acpi_get_override_irq+0x85/0x8c [<c0455536>] ? trace_hardirqs_off+0xb/0xd [<c0457639>] lock_acquire+0x5a/0x78 [<f8126835>] ? ath5k_ani_calibration+0x24/0x52b [ath5k] [<c075f6ed>] _raw_spin_lock_bh+0x20/0x2f [<f8126835>] ? ath5k_ani_calibration+0x24/0x52b [ath5k] [<f8126835>] ath5k_ani_calibration+0x24/0x52b [ath5k] [<c0438f99>] ? tasklet_action+0x3b/0xc6 [<f8123c2b>] ath5k_tasklet_ani+0x18/0x22 [ath5k] [<c0438fd1>] tasklet_action+0x73/0xc6 [<c043945f>] __do_softirq+0x86/0x111 [<c0439520>] do_softirq+0x36/0x5a [<c0439659>] irq_exit+0x35/0x69 [<c0403fb9>] do_IRQ+0x86/0x9a [<c04034ee>] common_interrupt+0x2e/0x40 [<c045007b>] ? do_adjtimex+0x223/0x55e [<c0408245>] ? mwait_idle+0x5c/0x6c [<c040227f>] cpu_idle+0x4e/0x6b [<c074b6e9>] rest_init+0x8d/0x92 [<c09758ea>] start_kernel+0x320/0x325 [<c09750d0>] i386_start_kernel+0xd0/0xd7 Signed-off-by: Ben Greear <greearb@candelatech.com> Acked-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-25ath9k: Properly initialize ath_common->cc_lock.Ben Greear
Otherwise, lockdep splats, at the least: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. Pid: 2240, comm: ip Not tainted 2.6.36-rc8-wl+ #32 Call Trace: [<c075d940>] ? printk+0xf/0x17 [<c045507a>] register_lock_class+0x5a/0x29e [<c0455be2>] ? mark_lock+0x1e/0x1de [<c0456af5>] __lock_acquire+0xa2/0xb8c [<c0455be2>] ? mark_lock+0x1e/0x1de [<c0457639>] lock_acquire+0x5a/0x78 [<f8c5115b>] ? ath9k_config+0x274/0x3d8 [ath9k] [<c075f602>] _raw_spin_lock_irqsave+0x2f/0x3f [<f8c5115b>] ? ath9k_config+0x274/0x3d8 [ath9k] [<f8c5115b>] ath9k_config+0x274/0x3d8 [ath9k] [<f8c0ba2e>] ieee80211_hw_config+0x11b/0x125 [mac80211] [<f8c17edf>] ieee80211_do_open+0x3c5/0x466 [mac80211] [<f8c171d6>] ? ieee80211_check_concurrent_iface+0x21/0x13a [mac80211] [<f8c17fdb>] ieee80211_open+0x5b/0x5e [mac80211] [<c06ce76b>] __dev_open+0x80/0xae [<c06cc99b>] __dev_change_flags+0xa0/0x115 [<c06ce6bf>] dev_change_flags+0x13/0x3f [<c06d7e78>] do_setlink+0x23a/0x51b [<c0455037>] ? register_lock_class+0x17/0x29e [<c06d847c>] rtnl_newlink+0x269/0x431 [<c06d8291>] ? rtnl_newlink+0x7e/0x431 [<c0455be2>] ? mark_lock+0x1e/0x1de [<c0455de9>] ? mark_held_locks+0x47/0x5f [<c075ebcf>] ? __mutex_lock_common+0x2bb/0x2d6 [<c0456045>] ? trace_hardirqs_on_caller+0x104/0x125 [<c075ebe0>] ? __mutex_lock_common+0x2cc/0x2d6 [<c06d8213>] ? rtnl_newlink+0x0/0x431 [<c06d79e2>] rtnetlink_rcv_msg+0x182/0x198 [<c06d7860>] ? rtnetlink_rcv_msg+0x0/0x198 [<c06e503c>] netlink_rcv_skb+0x30/0x77 [<c06d7859>] rtnetlink_rcv+0x1b/0x22 [<c06e4e77>] netlink_unicast+0xbe/0x119 [<c06e5a15>] netlink_sendmsg+0x234/0x24c [<c06bf93a>] __sock_sendmsg+0x51/0x5a [<c06bfba4>] sock_sendmsg+0x93/0xa7 [<c04968cf>] ? might_fault+0x47/0x81 [<c0496904>] ? might_fault+0x7c/0x81 [<c06c7904>] ? copy_from_user+0x8/0xa [<c06c7c2d>] ? verify_iovec+0x3e/0x6d [<c06bfd8c>] sys_sendmsg+0x149/0x193 [<c0455037>] ? register_lock_class+0x17/0x29e [<c0455be2>] ? mark_lock+0x1e/0x1de [<c0498d7a>] ? __do_fault+0x1fc/0x3a5 [<c048690a>] ? unlock_page+0x40/0x43 [<c0498ef7>] ? __do_fault+0x379/0x3a5 [<c04576dd>] ? lock_release_non_nested+0x86/0x1d8 [<c04968cf>] ? might_fault+0x47/0x81 [<c04968cf>] ? might_fault+0x47/0x81 [<c06c148b>] sys_socketcall+0x15e/0x1a5 [<c0402f1c>] sysenter_do_call+0x12/0x38 Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-25mac80211: cancel restart_work explicitly instead of depending on ↵Tejun Heo
flush_scheduled_work() iee80211_hw->restart_work is the only work which uses the system workqueue. Instead of calling flush_scheduled_work() during iee80211_exit(), cancel the work during unregistration. This is to prepare for the deprecation and removal of flush_scheduled_work(). Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-25hfsplus: fix double lock typo in ioctlDan Carpenter
This was supposed to be a mutex_unlock() instead of a mutex_lock(). Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Christoph Hellwig <hch@tuxera.com>
2010-10-25ALSA: hda - Change BTL amp level on some HP notebooksVitaliy Kulikov
Some HP laptops have lower amplifier levels for speakers in comparison with headphone outputs. This patch changes the BTL amp level for these machines to balance both the speaker and headphone output levels. Signed-off-by: Vitaliy Kulikov <Vitaliy.Kulikov@idt.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-10-25Merge branch 'davinci-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci * 'davinci-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci: (50 commits) davinci: fix remaining board support after io_pgoffst removal davinci: mityomapl138: make file local data static arm/davinci: remove duplicated include davinci: Initial support for Omapl138-Hawkboard davinci: MityDSP-L138/MityARM-1808 read MAC address from I2C Prom davinci: add tnetv107x touchscreen platform device input: add driver for tnetv107x touchscreen controller davinci: add keypad config for tnetv107x evm board davinci: add tnetv107x keypad platform device input: add driver for tnetv107x on-chip keypad controller net: davinci_emac: cleanup unused cpdma code net: davinci_emac: switch to new cpdma layer net: davinci_emac: separate out cpdma code net: davinci_emac: cleanup unused mdio emac code omap: cleanup unused davinci mdio arch code davinci: cleanup mdio arch code and switch to phy_id net: davinci_emac: switch to new mdio omap: add mdio platform devices davinci: add mdio platform devices net: davinci_emac: separate out davinci mdio ... Fix up trivial conflict in drivers/input/keyboard/Kconfig (two entries added next to each other - one from the davinci merge, one from the input merge)
2010-10-25x86-32, mm: Remove duplicated #includeBorislav Petkov
b40827fa7268fda8a62490728a61c2856f33830b added an include directive which is needless and is taken care of by a previous one. Remove it. Caught-by: Jaswinder Singh Rajput <jaswinderlinux@gmail.com> Signed-off-by: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Jaswinder Singh Rajput <jaswinderlinux@gmail.com> Cc: H. Peter Anvin <hpa@linux.intel.com> LKML-Reference: <20101025162523.GA4712@a1.tnic> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-10-25Merge branch 'linus' into x86/urgentIngo Molnar
Merge reason: We want to queue up a dependent fix. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-10-25IB/core: Add link layer type information to sysfsEli Cohen
Since an IB transport port may use either IB or Ethernet as its link layer, add the file /sys/class/infiniband/<device>/ports/<port_num>/link_layer to show the link layer for the port. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
generated by cgit (git 2.34.1) at 2025-09-17 07:08:16 +0000