| Age | Commit message (Collapse) | Author |
|---|
|
Pull the intel i915 hibernation memory corruption fix from Dave Airlie:
"I tracked down the misc memory corruption after i915 hibernate to the
blinking fbcon cursor, and realised the i915 driver wasn't doing the
fbdev suspend/resume calls at all. nouveau and radeon have done these
calls for a long time.
This has been fairly well tested and is definitely the main culprit in
hibernate not working."
Yay.
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/i915: suspend fbdev device around suspend/hibernate
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into fixes
* 'for-3.4/fixes-for-rc1-and-v3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra:
ARM: tegra: Fix device tree AUXDATA for USB/EHCI
|
|
During a complex merge for v3.4, one line of the commit
c20b909be9ba27173294a52d08cab293ec030a2c ("ARM: LPC32xx: Ethernet support") was
reverted wrongly ("lpc-eth.0" -> "lpc-net.0") while the other conflicts were
merged correctly. This patch re-applies the clock name "lpc-eth.0".
Signed-off-by: Roland Stigge <stigge@antcom.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
turbostat -s
cuts down on the amount of output, per user request.
also treak some output whitespace and the man page.
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Conflicts:
arch/arm/mach-omap1/board-htcherald.c
arch/arm/mach-omap2/board-rx51-peripherals.c
arch/arm/plat-omap/include/plat/gpio.h
drivers/input/serio/ams_delta_serio.c
|
|
|
|
Fix the compilation break observed on latest mainline caused
by 9f97da78 (Disintegrate asm/system.h for ARM):
arch/arm/mach-omap1/pm.c: In function 'omap_pm_prepare':
arch/arm/mach-omap1/pm.c:587: error: implicit declaration of function 'disable_hlt'
arch/arm/mach-omap1/pm.c: In function 'omap_pm_finish':
arch/arm/mach-omap1/pm.c:624: error: implicit declaration of function 'enable_hlt'
arch/arm/mach-omap1/pm.c: In function 'omap_pm_init':
arch/arm/mach-omap1/pm.c:681: error: 'arm_pm_idle' undeclared (first use in this function)
...
arch/arm/mach-omap2/pm.c: In function 'omap_pm_begin':
arch/arm/mach-omap2/pm.c:239: error: implicit declaration of function 'disable_hlt'
arch/arm/mach-omap2/pm.c: In function 'omap_pm_end':
arch/arm/mach-omap2/pm.c:247: error: implicit declaration of function 'enable_hlt'
Signed-off-by: Govindraj.R <govindraj.raja@ti.com>
Acked-by: Kevin Hilman <khilman@ti.com>
[tony@atomide.com: updated to fix omap1 too]
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Fix module parameter data type to eliminate build warnings.
sound/isa/opti9xx/opti92x-ad1848.c:87:1: warning: return from incompatible pointer type
sound/isa/opti9xx/opti92x-ad1848.c:87:1: warning: return from incompatible pointer type
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Fix module parameter data type to eliminate build warning.
sound/oss/msnd_pinnacle.c:1727:1: warning: return from incompatible pointer type
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: A few more updates for 3.4
The cleanup of the dmaengine parameter messup and a tweak to some
callibration values for WM1811.
|
|
Update my email address.
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Since all references to OMAP_GPIO_IRQ macro are replaced now
with gpio_to_irq(), this can be removed altogether.
Signed-off-by: Tarun Kanti DebBarma <tarun.kanti@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Even though ams-delta-serio input driver uses gpio_to_irq() in all
relevent places to get irq number, the ams_delta_serio_exit() still
uses OMAP_GPIO_IRQ macro. Fix this.
Signed-off-by: Tarun Kanti DebBarma <tarun.kanti@ti.com>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
The following commits change gpio-omap to use dynamic
IRQ allocation:
25db711 gpio/omap: Fix IRQ handling for SPARSE_IRQ
384ebe1 gpio/omap: Add DT support to GPIO driver
With dynamic allocation of IRQ the usage of OMAP_GPIO_IRQ
is no longer valid. We must be using gpio_to_irq() instead.
Signed-off-by: Tarun Kanti DebBarma <tarun.kanti@ti.com>
[tony@atomide.com: updated comments]
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
The commit 89812fc81f8d ("perf tools: Add parser generator for events
parsing") changed event parsing engine but missed the ref-cycles event.
Add it.
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1333016517-10591-1-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When we use autodefrag, we forget to update the index which indicates
the last page we've dirty. And we'll set dirty flags on a same set of
pages again and again.
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
$ mkfs.btrfs /dev/sdb7
$ mount /dev/sdb7 /mnt/btrfs/ -oautodefrag
$ dd if=/dev/zero of=/mnt/btrfs/foobar bs=4k count=10 oflag=direct 2>/dev/null
$ filefrag -v /mnt/btrfs/foobar
Filesystem type is: 9123683e
File size of /mnt/btrfs/foobar is 40960 (10 blocks, blocksize 4096)
ext logical physical expected length flags
0 0 3072 10 eof
/mnt/btrfs/foobar: 1 extent found
Now we have a big real extent [0, 40960), but autodefrag will still defrag it.
$ sync
$ filefrag -v /mnt/btrfs/foobar
Filesystem type is: 9123683e
File size of /mnt/btrfs/foobar is 40960 (10 blocks, blocksize 4096)
ext logical physical expected length flags
0 0 3082 10 eof
/mnt/btrfs/foobar: 1 extent found
So if we already find a big real extent, we're ok about that, just skip it.
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
If our file's layout is as follows:
| hole | data1 | hole | data2 |
we do not need to defrag this file, because this file has holes and
cannot be merged into one extent.
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
$ mkfs.btrfs disk
$ mount disk /mnt -o autodefrag
$ dd if=/dev/zero of=/mnt/foobar bs=4k count=10 2>/dev/null && sync
$ for i in `seq 9 -2 0`; do dd if=/dev/zero of=/mnt/foobar bs=4k count=1 \
seek=$i conv=notrunc 2> /dev/null; done && sync
then we'll get to defrag "foobar" again and again.
So does option "-o autodefrag,compress".
Reasons:
When the cleaner kthread gets to fetch inodes from the defrag tree and defrag
them, it will dirty pages and submit them, this will comes to another DATA COW
where the processing inode will be inserted to the defrag tree again.
This patch sets a rule for COW code, i.e. insert an inode when we're really
going to make some defragments.
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
commit 600a45e1d5e376f679ff9ecc4ce9452710a6d27c
(Btrfs: fix deadlock on page lock when doing auto-defragment)
fixes the deadlock on page, but it also introduces another bug.
A page may have been truncated after unlock & lock.
So we need to find it again to get the right one.
And since we've held i_mutex lock, inode size remains unchanged and
we can drop isize overflow checks.
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
The bug is from running xfstests 209 with autodefrag.
The race is as follows:
t1 t2(autodefrag)
direct IO
invalidate pagecache
dio(old data) add_inode_defrag
invalidate pagecache
endio
direct IO
invalidate pagecache
run_defrag
readpage(old data)
set page dirty (old data)
dio(new data, rewrite)
invalidate pagecache (*)
endio
t2(autodefrag) will get old data into pagecache via readpage and set
pagecache dirty. Meanwhile, invalidate pagecache(*) will fail due to
dirty flags in pages. So the old data may be flushed into disk by
flush thread, which will lead to data loss.
And so does the case of user defragment progs.
The patch fixes this race by holding i_mutex when we readpage and set page dirty.
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
This deadlock comes from xfstests 251.
We'll hold the chunk_mutex throughout the whole of a chunk allocation.
But if we find that we've used up system chunk space, we need to allocate a
new system chunk, but this will lead to a recursion of chunk allocation and end
up with a deadlock on chunk_mutex.
So instead we need to allocate the system chunk first if we find we're in ENOSPC.
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
o For space info, the type of space info is useful for debug.
o For transaction handle, its transid is useful.
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
The MPC8569 Rev2.0 has the correct SNUM table as QE Reference Manual, we
must follow it.
However the Rev1.0 silicon need the old SNUM table as workaround due to
Rev1.0 silicon SNUM erratum.
So, we support both snum table, and choose the one FDT tell us.
And u-boot will fixup FDT according to SPRN_SVR.
Signed-off-by: Liu Yu <yu.liu@freescale.com>
Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
|
|
The association in the decice tree between PCI and MSI
using fsl,msi property was an artificial one and it does
not reflect the actual hardware.
Signed-off-by: Diana CRACIUN <Diana.Craciun@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
|
|
The "memory" clobber tells the compiler to ensure that all writes to memory
are committed before the hypercall is made.
"memory" is only necessary for hcalls where the Hypervisor will read or
write guest memory. However, we add it to all hcalls because the impact is
minimal, and we want to ensure that it's present for the hcalls that need
it.
Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
|
|
Enable I2C char dev interface for user space testing of I2C controler.
Enable the I2C driver on 64-bit builds (corenet64_smp_defconfig) as it
was missing.
Signed-off-by: Shaveta Leekha <shaveta@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
|
|
Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
|
|
Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
|
|
Remove the check for CONFIG_PPC_85xx and CONFIG_PPC_86xx from fsl_guts.h.
The check was originally intended to allow the same header file to
be used on 85xx and 86xx systems, even though the Global Utilities
register could be different. It turns out that they're not actually
different, and so the check is not necessary. In addition, neither
macro is defined for 64-bit e5500 kernels, so that causes a build
break.
Signed-off-by: Timur Tabi <timur@freescale.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
|
|
Otherwise, we get a warning or error similar to this when building with
CONFIG_NFSD_V4 disabled:
ERROR: "nfsd4_cld_block" [fs/nfsd/nfsd.ko] undefined!
Fix this by wrapping the calls to rpc_pipefs_notifier_register and
..._unregister in another function and providing no-op replacements
when CONFIG_NFSD_V4 is disabled.
Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
The default netlink message size limit might be exceeded when dumping a
lot of algorithms to userspace. As a result, not all of the instantiated
algorithms dumped to userspace. So calculate an upper bound on the message
size and call netlink_dump_start() with that value.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
We lookup algorithms with crypto_alg_mod_lookup() when instantiating via
crypto_add_alg(). However, algorithms that are wrapped by an IV genearator
(e.g. aead or genicv type algorithms) need special care. The userspace
process hangs until it gets a timeout when we use crypto_alg_mod_lookup()
to lookup these algorithms. So export the lookup functions for these
algorithms and use them in crypto_add_alg().
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
We use the active cpumask to determine the superset of cpus
to use for parallelization. However, the active cpumask is
for internal usage of the scheduler and therefore not the
appropriate cpumask for these purposes. So use the online
cpumask instead.
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
We don't remove the cpu that went offline from our cpumasks
on cpu hotplug. This got lost somewhere along the line, so
restore it. This fixes a hang of the padata instance on cpu
hotplug.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
We use the active cpumask to determine the superset of cpus
to use for parallelization. However, the active cpumask is
for internal usage of the scheduler and therefore not the
appropriate cpumask for these purposes. So use the online
cpumask instead.
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add a reference to the padata api documentation at Documentation/padata.txt
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Merge reason: It has not gone upstream via the ARM tree, merge it via
the scheduler tree.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Notify get_robust_list users that the syscall is going away.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Darren Hart <dvhart@linux.intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Serge E. Hallyn <serge.hallyn@canonical.com>
Cc: kernel-hardening@lists.openwall.com
Cc: spender@grsecurity.net
Link: http://lkml.kernel.org/r/20120323190855.GA27213@www.outflux.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
It was possible to extract the robust list head address from a setuid
process if it had used set_robust_list(), allowing an ASLR info leak. This
changes the permission checks to be the same as those used for similar
info that comes out of /proc.
Running a setuid program that uses robust futexes would have had:
cred->euid != pcred->euid
cred->euid == pcred->uid
so the old permissions check would allow it. I'm not aware of any setuid
programs that use robust futexes, so this is just a preventative measure.
(This patch is based on changes from grsecurity.)
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Darren Hart <dvhart@linux.intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Serge E. Hallyn <serge.hallyn@canonical.com>
Cc: kernel-hardening@lists.openwall.com
Cc: spender@grsecurity.net
Link: http://lkml.kernel.org/r/20120319231253.GA20893@www.outflux.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
We respect node affinity of devices already in the irq descriptor
allocation, but we ignore it for the initial interrupt affinity
setup, so the interrupt might be routed to a different node.
Restrict the default affinity mask to the node on which the irq
descriptor is allocated.
[ tglx: Massaged changelog ]
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Link: http://lkml.kernel.org/r/1332788538-17425-1-git-send-email-prarit@redhat.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
The only place irq_finalize_oneshot() is called with force parameter set
is the threaded handler error exit path. But IRQTF_RUNTHREAD is dropped
at this point and irq_wake_thread() is not going to set it again,
since PF_EXITING is set for this thread already. So irq_finalize_oneshot()
will drop the threads bit in threads_oneshot anyway and hence the force
parameter is superfluous.
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Link: http://lkml.kernel.org/r/20120321162234.GP24806@dhcp-26-207.brq.redhat.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
exit_irq_thread() clears IRQTF_RUNTHREAD flag and drops the thread's bit in
desc->threads_oneshot then. The bit must not be set again in between and it
does not, since irq_wake_thread() sees PF_EXITING flag first and returns.
Due to above the order or checking PF_EXITING and IRQTF_RUNTHREAD flags in
irq_wake_thread() is important. This change just makes it more visible in the
source code.
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Link: http://lkml.kernel.org/r/20120321162212.GO24806@dhcp-26-207.brq.redhat.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
This adopts a trimmed down version of the MIPS port mangling interface
limited to the I/O swabbing for platforms that can't use little endian
accessors. For platforms with mixed I/O spaces involving PCI it will
still be necessary to enable byte swapping at the host controller level.
Attention needs to be paid to all of host controller endianness, CPU
endianness, and whether I/O accesses are explicitly swapped or not via
SWAP_IO_SPACE. Fortunately the platforms that need this are in the
minority.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
|
|
Looking at hibernate overwriting I though it looked like a cursor,
so I tracked down this missing piece to stop the cursor blink
timer. I've no idea if this is sufficient to fix the hibernate
problems people are seeing, but please test it.
Both radeon and nouveau have done this for a long time.
I've run this personally all night hib/resume cycles with no fails.
Reviewed-by: Keith Packard <keithp@keithp.com>
Reported-by: Petr Tesarik <kernel@tesarici.cz>
Reported-by: Stanislaw Gruszka <sgruszka@redhat.com>
Reported-by: Lots of misc segfaults after hibernate across the world.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=37142
Tested-by: Dave Airlie <airlied@redhat.com>
Tested-by: Bojan Smojver <bojan@rexursive.com>
Tested-by: Andreas Hartmann <andihartmann@01019freenet.de>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
If schedule is called from an interrupt handler __schedule_bug()
will call show_regs() with the registers saved during the
interrupt handling done in do_IRQ(). This means we'll see the
registers and the backtrace for the process that was interrupted
and not the full backtrace explaining who called schedule().
This is due to 838225b ("sched: use show_regs() to improve
__schedule_bug() output", 2007-10-24) which improperly assumed
that get_irq_regs() would return the registers for the current
stack because it is being called from within an interrupt
handler. Simply remove the show_reg() code so that we dump a
backtrace for the interrupt handler that called schedule().
[ I ran across this when I was presented with a scheduling while
atomic log with a stacktrace pointing at spin_unlock_irqrestore().
It made no sense and I had to guess what interrupt handler could
be called and poke around for someone calling schedule() in an
interrupt handler. A simple test of putting an msleep() in
an interrupt handler works better with this patch because you
can actually see the msleep() call in the backtrace. ]
Also-reported-by: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Cc: Satyam Sharma <satyam@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1332979847-27102-1-git-send-email-sboyd@codeaurora.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
These are obsolete: cpu_*_mask provides (const) pointers.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
This has been obsolescent for a while, fix documentation and
misc comments.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
This has been obsolescent for a while; time for the final push.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Dave Jones <davej@redhat.com>
Cc: cpufreq@vger.kernel.org
Cc: Sundar Iyer <sundar.iyer@stericsson.com>
Cc: Martin Persson <martin.persson@stericsson.com>
Cc: Jonas Aaberg <jonas.aberg@stericsson.com>
|
|
This has been obsolescent for a while; time for the final push.
In adjacent context, replaced old cpus_* with cpumask_*.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: David S. Miller <davem@davemloft.net> (arch/sparc)
Acked-by: Chris Metcalf <cmetcalf@tilera.com> (arch/tile)
Cc: user-mode-linux-devel@lists.sourceforge.net
Cc: Russell King <linux@arm.linux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: linux-hexagon@vger.kernel.org
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Helge Deller <deller@gmx.de>
Cc: sparclinux@vger.kernel.org
|
