summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-08-03Merge branch 'pm-devfreq'Rafael J. Wysocki
* pm-devfreq: PM / devfreq: Fix the wrong end with semicolon PM / devfreq: Fix indentaion of devfreq_summary debugfs node PM / devfreq: Clean up the devfreq instance name in sysfs attr memory: samsung: exynos5422-dmc: Add module param to control IRQ mode memory: samsung: exynos5422-dmc: Adjust polling interval and uptreshold memory: samsung: exynos5422-dmc: Use delayed timer as default PM / devfreq: Add support delayed timer for polling mode dt-bindings: devfreq: rk3399_dmc: Add rockchip,pmu phandle PM / devfreq: tegra: Add Dmitry as a maintainer PM / devfreq: event: Fix trivial spelling PM / devfreq: rk3399_dmc: Fix kernel oops when rockchip,pmu is absent
2020-08-03mac80211: Do not report beacon loss if beacon filtering enabledLoic Poulain
mac80211.h says: Beacon filter support is advertised with the IEEE80211_VIF_BEACON_FILTER interface capability. The driver needs to enable beacon filter support whenever power save is enabled, that is IEEE80211_CONF_PS is set. When power save is enabled, the stack will not check for beacon loss and the driver needs to notify about loss of beacons with ieee80211_beacon_loss(). Some controllers may want to dynamically enable the beacon filter capabilities on power save entry (CONF_PS) and disable it on exit. This is the case for the wcn36xx driver which only supports beacon filtering in PS mode (no CONNECTION_MONITOR support). When the mac80211 beacon monitor timer expires, the beacon filter flag must be checked again in case it as been changed in between (e.g. vif moved to PS mode). Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Link: https://lore.kernel.org/r/1592471863-31402-1-git-send-email-loic.poulain@linaro.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-08-03Merge branch 'locking/nmi' into locking/core, to pick up completed topic branchIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-08-03netfilter: flowtable: Set offload timeout when adding flowRoi Dayan
On heavily loaded systems the GC can take time to go over all existing conns and reset their timeout. At that time other calls like from nf_conntrack_in() can call of nf_ct_is_expired() and see the conn as expired. To fix this when we set the offload bit we should also reset the timeout instead of counting on GC to finish first iteration over all conns before the initial timeout. Fixes: 90964016e5d3 ("netfilter: nf_conntrack: add IPS_OFFLOAD status bit") Signed-off-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-08-03netfilter: conntrack: Move nf_ct_offload_timeout to header fileRoi Dayan
To be used by callers from other modules. [ Rename DAY to NF_CT_DAY to avoid possible symbol name pollution issue --Pablo ] Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Oz Shlomo <ozsh@mellanox.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-08-03selftests: netfilter: add meta iif/oif match testFlorian Westphal
simple test case, but would have caught this: FAIL: iifgroupcount, want "packets 2", got table inet filter { counter iifgroupcount { packets 0 bytes 0 } } Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-08-03mac80211: fix misplaced while instead of ifJohannes Berg
This never was intended to be a 'while' loop, it should've just been an 'if' instead of 'while'. Fix this. I noticed this while applying another patch from Ben that intended to fix a busy loop at this spot. Cc: stable@vger.kernel.org Fixes: b16798f5b907 ("mac80211: mark station unauthorized before key removal") Reported-by: Ben Greear <greearb@candelatech.com> Link: https://lore.kernel.org/r/20200803110209.253009ae41ff.I3522aad099392b31d5cf2dcca34cbac7e5832dde@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-08-03nl80211: use eth_zero_addr() to clear mac addressMiaohe Lin
Use eth_zero_addr() to clear mac address instead of memset(). Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Link: https://lore.kernel.org/r/1596273349-24333-1-git-send-email-linmiaohe@huawei.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-08-03mac80211: use eth_zero_addr() to clear mac addressMiaohe Lin
Use eth_zero_addr() to clear mac address instead of memset(). Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Link: https://lore.kernel.org/r/1596273158-24183-1-git-send-email-linmiaohe@huawei.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-08-03mac8211: fix struct initialisationJohn Crispin
Sparse showed up with the following error. net/mac80211/agg-rx.c:480:43: warning: Using plain integer as NULL pointer Fixes: 2ab45876756f (mac80211: add support for the ADDBA extension element) Signed-off-by: John Crispin <john@phrozen.org> Link: https://lore.kernel.org/r/20200803084540.179908-1-john@phrozen.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-08-03mac80211: Handle special status codes in SAE commitJouni Malinen
SAE authentication has been extended with H2E (IEEE 802.11 REVmd) and PK (WFA) options. Those extensions use special status code values in the SAE commit messages (Authentication frame with transaction sequence number 1) to identify which extension is in use. mac80211 was interpreting those new values as the AP denying authentication and that resulted in failure to complete SAE authentication in some cases. Fix this by adding exceptions for the new status code values 126 and 127. Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Link: https://lore.kernel.org/r/20200731183830.18735-1-jouni@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-08-03Revert "ALSA: hda: call runtime_allow() for all hda controllers"Hui Wang
This reverts commit 9a6418487b56 ("ALSA: hda: call runtime_allow() for all hda controllers"). The reverted patch already introduced some regressions on some machines: - on gemini-lake machines, the error of "azx_get_response timeout" happens in the hda driver. - on the machines with alc662 codec, the audio jack detection doesn't work anymore. Fixes: 9a6418487b56 ("ALSA: hda: call runtime_allow() for all hda controllers") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=208511 Cc: <stable@vger.kernel.org> Signed-off-by: Hui Wang <hui.wang@canonical.com> Link: https://lore.kernel.org/r/20200803064638.6139-1-hui.wang@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-08-02md/raid5: Allow degraded raid6 to do rmwChangSyun Peng
Degraded raid6 always do reconstruct-write now. With raid6 xor supported, we can do rmw in degraded raid6. This patch can reduce many read IOs to improve performance. If the failed disk is P, Q or the disk we want to write to, we may need to do reconstruct-write in max degraded raid6. In this situation we can not read enough data from handle_stripe_dirtying() so we have to set force_rcw in handle_stripe_fill() to read all data. Reviewed-by: Alex Wu <alexwu@synology.com> Reviewed-by: BingJing Chang <bingjingc@synology.com> Reviewed-by: Danny Shih <dannyshih@synology.com> Signed-off-by: ChangSyun Peng <allenpeng@synology.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2020-08-02md/raid5: Fix Force reconstruct-write io stuck in degraded raid5ChangSyun Peng
In degraded raid5, we need to read parity to do reconstruct-write when data disks fail. However, we can not read parity from handle_stripe_dirtying() in force reconstruct-write mode. Reproducible Steps: 1. Create degraded raid5 mdadm -C /dev/md2 --assume-clean -l5 -n3 /dev/sda2 /dev/sdb2 missing 2. Set rmw_level to 0 echo 0 > /sys/block/md2/md/rmw_level 3. IO to raid5 Now some io may be stuck in raid5. We can use handle_stripe_fill() to read the parity in this situation. Cc: <stable@vger.kernel.org> # v4.4+ Reviewed-by: Alex Wu <alexwu@synology.com> Reviewed-by: BingJing Chang <bingjingc@synology.com> Reviewed-by: Danny Shih <dannyshih@synology.com> Signed-off-by: ChangSyun Peng <allenpeng@synology.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2020-08-03ALSA: hda/ca0132 - Fix AE-5 microphone selection commands.Connor McAdams
The ca0113 command had the wrong group_id, 0x48 when it should've been 0x30. The front microphone selection should now work. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200803002928.8638-3-conmanx360@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-08-03ALSA: hda/ca0132 - Add new quirk ID for Recon3D.Connor McAdams
Add a new quirk ID for the Recon3D, as tested by me. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200803002928.8638-2-conmanx360@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-08-03ALSA: hda/ca0132 - Fix ZxR Headphone gain control get value.Connor McAdams
When the ZxR headphone gain control was added, the ca0132_switch_get function was not updated, which meant that the changes to the control state were not saved when entering/exiting alsamixer. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200803002928.8638-1-conmanx360@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-08-03Merge branch 'for-next' into for-linusTakashi Iwai
2020-08-02raid5: don't duplicate code for different paths in handle_stripeGuoqing Jiang
As we can see, R5_LOCKED is set and s.locked is increased whether R5_ReWrite is set or not, so move it to common path. Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2020-08-02raid5-cache: hold spinlock instead of mutex in r5c_journal_mode_showGuoqing Jiang
Replace mddev_lock with spin_lock to align with other show methods in raid5_attrs. Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2020-08-02md: print errno in super_writtenGuoqing Jiang
It is better to print errno instead of bi_status. Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2020-08-02md/raid5: remove the redundant setting of STRIPE_HANDLEGuoqing Jiang
The flag is already set before compare rcw with rmw, so it is not necessary to do it again. Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2020-08-02md: register new md sysfs file 'uuid' read-onlySebastian Parschauer
Report the UUID of the MD array in the following format: xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx This is useful if you don't want to wait for udev to identify array. And it is also easy for script to monitor it with the format. Signed-off-by: Sebastian Parschauer <s.parschauer@gmx.de> [Guoqing: mention the change in md.rst] Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2020-08-02md: fix max sectors calculation for super 1.0Xiao Ni
To grow size of super 1.0 raid array, it is necessary to check the device max usable size. Now it uses rdev->sectors for max usable size. If one disk is 500G and the raid device only uses the 100GB of this disk. rdev->sectors can't tell the real max usable size. The max usable size should be dev_size-(superblock_size+bitmap_size+badblock_size). Also, remove unnecessary sb_start update in super_1_rdev_size_change(). Signed-off-by: Xiao Ni <xni@redhat.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2020-08-02list: add "list_del_init_careful()" to go with "list_empty_careful()"Linus Torvalds
That gives us ordering guarantees around the pair. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-02mm: rewrite wait_on_page_bit_common() logicLinus Torvalds
It turns out that wait_on_page_bit_common() had several problems, ranging from just unfair behavioe due to re-queueing at the end of the wait queue when re-trying, and an outright bug that could result in missed wakeups (but probably never happened in practice). This rewrites the whole logic to avoid both issues, by simply moving the logic to check (and possibly take) the bit lock into the wakeup path instead. That makes everything much more straightforward, and means that we never need to re-queue the wait entry: if we get woken up, we'll be notified through WQ_FLAG_WOKEN, and the wait queue entry will have been removed, and everything will have been done for us. Link: https://lore.kernel.org/lkml/CAHk-=wjJA2Z3kUFb-5s=6+n0qbTs8ELqKFt9B3pH85a8fGD73w@mail.gmail.com/ Link: https://lore.kernel.org/lkml/alpine.LSU.2.11.2007221359450.1017@eggly.anvils/ Reported-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Hugh Dickins <hughd@google.com> Cc: Michal Hocko <mhocko@suse.com> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-02Linux 5.8v5.8Linus Torvalds
2020-08-02Merge tag 'x86-urgent-2020-08-02' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fix from Ingo Molnar: "A single fix for a potential deadlock when printing a message about spurious interrupts" * tag 'x86-urgent-2020-08-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/i8259: Use printk_deferred() to prevent deadlock
2020-08-02Merge tag 'kbuild-fixes-v5.8-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - clean the generated moc file for xconfig - fix xconfig bugs, and revert some bad commits * tag 'kbuild-fixes-v5.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: remove redundant FORCE definition in scripts/Makefile.modpost kconfig: qconf: remove wrong ConfigList::firstChild() Revert "kconfig: qconf: don't show goback button on splitMode" Revert "kconfig: qconf: Change title for the item window" kconfig: qconf: remove "goBack" debug message kconfig: qconf: use delete[] instead of delete to free array kconfig: qconf: compile moc object separately kconfig: qconf: use if_changed for qconf.moc rule modpost: explain why we can't use strsep
2020-08-02netfilter: nf_tables: report EEXIST on overlapsPablo Neira Ayuso
Replace EBUSY by EEXIST in the following cases: - If the user adds a chain with a different configuration such as different type, hook and priority. - If the user adds a non-base chain that clashes with an existing basechain. - If the user adds a { key : value } mapping element and the key exists but the value differs. - If the device already belongs to an existing flowtable. User describe that this error reporting is confusing: - https://bugzilla.netfilter.org/show_bug.cgi?id=1176 - https://bugzilla.netfilter.org/show_bug.cgi?id=1413 Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-08-02Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM fixes from Paolo Bonzini: "Bugfixes and strengthening the validity checks on inputs from new userspace APIs. Now I know why I shouldn't prepare pull requests on the weekend, it's hard to concentrate if your son is shouting about his latest Minecraft builds in your ear. Fortunately all the patches were ready and I just had to check the test results..." * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: SVM: Fix disable pause loop exit/pause filtering capability on SVM KVM: LAPIC: Prevent setting the tscdeadline timer if the lapic is hw disabled KVM: arm64: Don't inherit exec permission across page-table levels KVM: arm64: Prevent vcpu_has_ptrauth from generating OOL functions KVM: nVMX: check for invalid hdr.vmx.flags KVM: nVMX: check for required but missing VMCS12 in KVM_SET_NESTED_STATE selftests: kvm: do not set guest mode flag
2020-08-02brcmfmac: Set timeout value when configuring power saveNicolas Saenz Julienne
Set the timeout value as per cfg80211's set_power_mgmt() request. If the requested value value is left undefined we set it to 2 seconds, the maximum supported value. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200721112302.22718-1-nsaenzjulienne@suse.de
2020-08-02bcma: gpio: Use irqchip templateLinus Walleij
This makes the driver use the irqchip template to assign properties to the gpio_irq_chip instead of using the explicit call to gpiochip_irqchip_add(). The irqchip is instead added while adding the gpiochip. Cc: Rafał Miłecki <rafal@milecki.pl> Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200722111725.210923-1-linus.walleij@linaro.org
2020-08-02drivers: bcma: remove set but not used variable `addrh` and `sizeh`Zheng Yongjun
Fixes gcc '-Wunused-but-set-variable' warning: drivers/bcma/scan.c: In function 'bcma_erom_get_addr_desc': drivers/bcma/scan.c:219 warning: variable `addrh` and `sizeh` set but not used [-Wunused-but-set-variable] Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200721083935.13306-1-zhengyongjun3@huawei.com
2020-08-02wl1251: fix always return 0 errorWang Hai
wl1251_event_ps_report() should not always return 0 because wl1251_ps_set_mode() may fail. Change it to return 'ret'. Fixes: f7ad1eed4d4b ("wl1251: retry power save entry") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200730073939.33704-1-wanghai38@huawei.com
2020-08-02airo: use generic power managementVaibhav Gupta
Drivers using legacy power management .suspen()/.resume() callbacks have to manage PCI states and device's PM states themselves. They also need to take care of standard configuration registers. Switch to generic power management framework using a single "struct dev_pm_ops" variable to take the unnecessary load from the driver. This also avoids the need for the driver to directly call most of the PCI helper functions and device power state control functions, as through the generic framework PCI Core takes care of the necessary operations, and drivers are required to do only device-specific jobs. Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200728114128.1218310-1-vaibhavgupta40@gmail.com
2020-08-02intersil: fix wiki website urlFlavio Suligoi
In some Intersil files, the wiki url is still the old "wireless.kernel.org" instead of the new "wireless.wiki.kernel.org" Signed-off-by: Flavio Suligoi <f.suligoi@asem.it> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200723135254.594984-1-f.suligoi@asem.it
2020-08-02qtnfmac: Missing platform_device_unregister() on error in qtnf_core_mac_alloc()Wang Hai
Add the missing platform_device_unregister() before return from qtnf_core_mac_alloc() in the error handling case. Fixes: 616f5701f4ab ("qtnfmac: assign each wiphy to its own virtual platform device") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Reviewed-by: Sergey Matyukevich <geomatsi@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200730064910.37589-1-wanghai38@huawei.com
2020-08-02ipw2x00: switch from 'pci_' to 'dma_' APIChristophe JAILLET
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated in 'ipw2100_msg_allocate()' (ipw2100.c), GFP_KERNEL can be used because it is called from the probe function. The call chain is: ipw2100_pci_init_one (the probe function) --> ipw2100_queues_allocate --> ipw2100_msg_allocate Moreover, 'ipw2100_msg_allocate()' already uses GFP_KERNEL for some other memory allocations. When memory is allocated in 'status_queue_allocate()' (ipw2100.c), GFP_KERNEL can be used because it is called from the probe function. The call chain is: ipw2100_pci_init_one (the probe function) --> ipw2100_queues_allocate --> ipw2100_rx_allocate --> status_queue_allocate Moreover, 'ipw2100_rx_allocate()' already uses GFP_KERNEL for some other memory allocations. When memory is allocated in 'bd_queue_allocate()' (ipw2100.c), GFP_KERNEL can be used because it is called from the probe function. The call chain is: ipw2100_pci_init_one (the probe function) --> ipw2100_queues_allocate --> ipw2100_rx_allocate --> bd_queue_allocate Moreover, 'ipw2100_rx_allocate()' already uses GFP_KERNEL for some other memory allocations. When memory is allocated in 'ipw2100_tx_allocate()' (ipw2100.c), GFP_KERNEL can be used because it is called from the probe function. The call chain is: ipw2100_pci_init_one (the probe function) --> ipw2100_queues_allocate --> ipw2100_tx_allocate Moreover, 'ipw2100_tx_allocate()' already uses GFP_KERNEL for some other memory allocations. When memory is allocated in 'ipw_queue_tx_init()' (ipw2200.c), GFP_KERNEL can be used because it is called from a call chain that already uses GFP_KERNEL and no spin_lock is taken in the between. The call chain is: ipw_up --> ipw_load --> ipw_queue_reset --> ipw_queue_tx_init 'ipw_up()' already uses GFP_KERNEL for some other memory allocations. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200722101716.26185-1-christophe.jaillet@wanadoo.fr
2020-08-02ipw2100: Use GFP_KERNEL instead of GFP_ATOMIC in some memory allocationChristophe JAILLET
The call chain is: ipw2100_pci_init_one (the probe function) --> ipw2100_queues_allocate --> ipw2100_tx_allocate No lock is taken in the between. So it is safe to use GFP_KERNEL in 'ipw2100_tx_allocate()'. BTW, 'ipw2100_queues_allocate()' also calls 'ipw2100_msg_allocate()' which already allocates some memory using GFP_KERNEL. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200722101701.26126-1-christophe.jaillet@wanadoo.fr
2020-08-02hostap: use generic power managementVaibhav Gupta
Drivers using legacy power management .suspen()/.resume() callbacks have to manage PCI states and device's PM states themselves. They also need to take care of standard configuration registers. Switch to generic power management framework using a single "struct dev_pm_ops" variable to take the unnecessary load from the driver. This also avoids the need for the driver to directly call most of the PCI helper functions and device power state control functions as through the generic framework, PCI Core takes care of the necessary operations, and drivers are required to do only device-specific jobs. Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200721150547.371763-1-vaibhavgupta40@gmail.com
2020-08-02b43legacy: Replace HTTP links with HTTPS onesAlexander A. Klimov
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200719111124.58167-1-grandmaster@al2klimov.de
2020-08-02b43: Replace HTTP links with HTTPS onesAlexander A. Klimov
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200719110115.58085-1-grandmaster@al2klimov.de
2020-08-02ipw2x00: Replace HTTP links with HTTPS onesAlexander A. Klimov
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200718100240.98593-1-grandmaster@al2klimov.de
2020-08-02rt2x00: pci: use generic power managementVaibhav Gupta
Drivers using legacy PM have to manage PCI states and device's PM states themselves. They also need to take care of configuration registers. With improved and powerful support of generic PM, PCI Core takes care of above mentioned, device-independent, jobs. The callbacks make use of PCI helper functions like pci_save/restore_state(), pci_enable/disable_device() and pci_set_power_state() to do required operations. In generic mode, they are no longer needed. Change function parameter in both .suspend() and .resume() to "struct device*" type. Use dev_get_drvdata() to get drv data. The .suspend() callback is invoking rt2x00lib_suspend() which needs to be modified as generic rt2x00pci_suspend() has no pm_message_t type argument, passed to it, which is required by it according to its declaration. Although this variable remained unused in the function body. Hence, remove it from the function definition & declaration. rt2x00lib_suspend() is also invoked by rt2x00usb_suspend() and rt2x00soc_suspend(). Thus, modify the functional call accordingly in their function body. Earlier, .suspend() & .resume() were exported and were used by the following drivers: - drivers/net/wireless/ralink/rt2x00/rt2400pci.c - drivers/net/wireless/ralink/rt2x00/rt2500pci.c - drivers/net/wireless/ralink/rt2x00/rt2800pci.c - drivers/net/wireless/ralink/rt2x00/rt61pci.c Now, we only need to bind "struct dev_pm_ops" variable to "struct pci_driver". Thus, make the callbacks static. Declare an "extern const struct dev_pm_ops" variable and bind PM callbacks to it. Now, export the variable instead and use it in respective drivers. Compile-tested only. Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200717110928.454867-1-vaibhavgupta40@gmail.com
2020-08-02wilc1000: Move wilc1000 SDIO ID's from driver source to common header fileAjay Singh
Moved macros used for Vendor/Device ID from wilc1000 driver to common header file and changed macro name for consistency with other macros. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Pali Rohár <pali@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200717051134.19160-1-ajay.kathat@microchip.com
2020-08-02mt7601u: add missing release on skb in mt7601u_mcu_msg_sendNavid Emamdoost
In the implementation of mt7601u_mcu_msg_send(), skb is supposed to be consumed on all execution paths. Release skb before returning if test_bit() fails. Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Acked-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200718052630.11032-1-navid.emamdoost@gmail.com
2020-08-02iwlwifi: yoyo: don't print failure if debug firmware is missingWolfram Sang
Missing this firmware is not fatal, my wifi card still works. Even more, I couldn't find any documentation what it is or where to get it. So, I don't think the users should be notified if it is missing. If you browse the net, you see the message is present is in quite some logs. Better remove it. Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200625165210.14904-1-wsa@kernel.org
2020-08-02rtw88: 8821c: coex: add functions and parametersPing-Cheng Chen
Without this patch, RTL8821CE will not have coex support, and will crash the system because of the NULL pointers for the coex functions. While RTL8822C series are WiFi + BT combo chips, it needs the co-existence mechanism for the device to work on both WiFi and BT without interfering each other. And the coex support has already been added before, most of the mechanisms are implemented. The driver should just add corresponding functions to operate on different types of chips and its coex parameters. Fixes: f745eb9ca5bf ("rtw88: 8821c: Add 8821CE to Kconfig and Makefile") Signed-off-by: Ping-Cheng Chen <pc.chen@realtek.com> Signed-off-by: Tzu-En Huang <tehuang@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200724054208.31115-1-yhchuang@realtek.com
2020-08-02rtw88: 8821c: make symbol 'rtw8821c_rtw_pwr_track_tbl' staticWei Yongjun
The sparse tool complains as follows: drivers/net/wireless/realtek/rtw88/rtw8821c.c:1374:32: warning: symbol 'rtw8821c_rtw_pwr_track_tbl' was not declared. Should it be static? This variable is not used outside of rtw8821c.c, so this commit marks it static. Fixes: 3a4312828ce1 ("rtw88: 8821c: add power tracking") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200721134901.33968-1-weiyongjun1@huawei.com
generated by cgit (git 2.34.1) at 2025-09-12 08:02:00 +0000