| Age | Commit message (Collapse) | Author |
|---|
|
When CONFIG_PPC_IRQ_SOFT_MASK_DEBUG is enabled (uncommon), we have a
series of WARN_ON's in arch_local_irq_restore().
These are "should never happen" conditions, but if they do happen they
can flood the console and render the system unusable. So switch them
to WARN_ON_ONCE().
Fixes: e2b36d591720 ("powerpc/64: Don't trace code that runs with the soft irq mask unreconciled")
Fixes: 9b81c0211c24 ("powerpc/64s: make PACA_IRQ_HARD_DIS track MSR[EE] closely")
Fixes: 7c0482e3d055 ("powerpc/irq: Fix another case of lazy IRQ state getting out of sync")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190708061046.7075-1-mpe@ellerman.id.au
|
|
|
|
'for-5.3/logitech' and 'for-5.3/wacom' into for-linus
|
|
Fix sparse warning:
fs/nfsd/nfsctl.c:1221:22: warning:
symbol '__get_nfsdfs_client' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Fix sparse warnings:
fs/nfsd/nfs4state.c:1908:6: warning: symbol 'drop_client' was not declared. Should it be static?
fs/nfsd/nfs4state.c:2518:6: warning: symbol 'force_expire_client' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
|
|
Shenzhen Sipeed Technology Co., Ltd. is a company focused on development
kits, which also contains rebranded Lichee Pi series.
Add its vendor prefix binding.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Shenzhen SoChip Technology Co., Ltd. is a hardware vendor that produces
EVBs with Allwinner chips. There's also a SoC named S3 that is developed
by Allwinner (based on Allwinner V3/V3s) but branded SoChip.
Add the vendor prefix for SoChip.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
28eac2b74cc7 ("powerpc/fsl: Remove cell-index from PCI nodes"),
and for now it is still not used, drop it from doc.
Cc: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
"git diff" says:
\ No newline at end of file
after modifying the file.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The BIT() macro is available for defining the required bit-flags.
Since it operates on an unsigned value and expands to an unsigned result,
using it, instead of an expression like (1 << x), also fixes the problem
of shifting a signed 32-bit value by 31 bits (e.g. 1 << 31).
Signed-off-by: Amol Surati <suratiamol@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds support for enabling or disabling the flooding of
unknown multicast traffic on the CPU ports, depending on the value
of the switchdev SWITCHDEV_ATTR_ID_BRIDGE_MROUTER attribute.
The current behavior is kept unchanged but a user can now prevent
the CPU conduit to be flooded with a lot of unregistered traffic that
the network stack needs to filter in software with e.g.:
echo 0 > /sys/class/net/br0/multicast_router
Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 9903c8dc7342 changed TC_ETF defines to use _BITUL instead of BIT
but did not add the dependecy on linux/const.h. As a consequence,
importing the uapi headers into iproute2 causes builds to fail. Add
the dependency.
Fixes: 9903c8dc7342 ("etf: Don't use BIT() in UAPI headers.")
Cc: Vedang Patel <vedang.patel@intel.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
On commit ba2b232108d3 ("net: netsec: add XDP support") a static
declaration for netsec_set_tx_de() was added to make the diff easier
to read. Now that the patch is merged let's move the functions around
and get rid of that
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
While freeing tx buffers the memory has to be unmapped if the packet was
an skb or was used for .ndo_xdp_xmit using the same arguments. Get rid
of the unneeded extra 'else if' statement
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pablo Neira Ayuso says:
====================
netfilter: add hardware offload infrastructure
This patchset adds support for Netfilter hardware offloads.
This patchset reuses the existing block infrastructure, the
netdev_ops->ndo_setup_tc() interface, TC_SETUP_CLSFLOWER classifier and
the flow rule API.
Patch #1 adds flow_block_cb_setup_simple(), most drivers do the same thing
to set up flow blocks, to reduce the number of changes, consolidate
codebase. Use _simple() postfix as requested by Jakub Kicinski.
This new function resides in net/core/flow_offload.c
Patch #2 renames TC_BLOCK_{UN}BIND to FLOW_BLOCK_{UN}BIND.
Patch #3 renames TCF_BLOCK_BINDER_TYPE_* to FLOW_BLOCK_BINDER_TYPE_*.
Patch #4 adds flow_block_cb_alloc() and flow_block_cb_free() helper
functions, this is the first patch of the flow block API.
Patch #5 adds the helper to deal with list operations in the flow block API.
This includes flow_block_cb_lookup(), flow_block_cb_add() and
flow_block_cb_remove().
Patch #6 adds flow_block_cb_priv(), flow_block_cb_incref() and
flow_block_cb_decref() which completes the flow block API.
Patch #7 updates the cls_api to use the flow block API from the new
tcf_block_setup(). This infrastructure transports these objects
via list (through the tc_block_offload object) back to the core
for registration.
CLS_API DRIVER
TC_SETUP_BLOCK ----------> setup flow_block_cb object &
it adds object to flow_block_offload->cb_list
|
CLS_API <-----------------------'
registers list with flow blocks
flow_block_cb & travels back to
calls ->reoffload the core for registration
drivers allocate and sets up (configure the blocks), then
registration happens from the core (cls_api and netfilter).
Patch #8 updates drivers to use the flow block API.
Patch #9 removes the tcf block callback API, which is replaced by the
flow block API.
Patch #10 adds the flow_block_cb_is_busy() helper to check if the block
is already used by a subsystem. This helper is invoked from
drivers. Once drivers are updated to support for multiple
subsystems, they can remove this check.
Patch #11 rename tc structure and definitions for the block bind/unbind
path.
Patch #12 introduces basic netfilter hardware offload infrastructure
for the ingress chain. This includes 5-tuple exact matching
and accept / drop rule actions. Only basechains are supported
at this stage, no .reoffload callback is implemented either.
Default policy to "accept" is only supported for now.
table netdev filter {
chain ingress {
type filter hook ingress device eth0 priority 0; flags offload;
ip daddr 192.168.0.10 tcp dport 22 drop
}
}
This patchset reuses the existing tcf block callback API and it places it
in the flow block callback API in net/core/flow_offload.c.
This series aims to address Jakub and Jiri's feedback, please see specific
patches in this batch for changelog in this v4.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds hardware offload support for nftables through the
existing netdev_ops->ndo_setup_tc() interface, the TC_SETUP_CLSFLOWER
classifier and the flow rule API. This hardware offload support is
available for the NFPROTO_NETDEV family and the ingress hook.
Each nftables expression has a new ->offload interface, that is used to
populate the flow rule object that is attached to the transaction
object.
There is a new per-table NFT_TABLE_F_HW flag, that is set on to offload
an entire table, including all of its chains.
This patch supports for basic metadata (layer 3 and 4 protocol numbers),
5-tuple payload matching and the accept/drop actions; this also includes
basechain hardware offload only.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
And any other existing fields in this structure that refer to tc.
Specifically:
* tc_cls_flower_offload_flow_rule() to flow_cls_offload_flow_rule().
* TC_CLSFLOWER_* to FLOW_CLS_*.
* tc_cls_common_offload to tc_cls_common_offload.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds a function to check if flow block callback is already in
use. Call this new function from flow_block_cb_setup_simple() and from
drivers.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Unused, now replaced by flow block API.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch updates flow_block_cb_setup_simple() to use the flow block API.
Several drivers are also adjusted to use it.
This patch introduces the per-driver list of flow blocks to account for
blocks that are already in use.
Remove tc_block_offload alias.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds tcf_block_setup() which uses the flow block API.
This infrastructure takes the flow block callbacks coming from the
driver and register/unregister to/from the cls_api core.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch completes the flow block API to introduce:
* flow_block_cb_priv() to access callback private data.
* flow_block_cb_incref() to bump reference counter on this flow block.
* flow_block_cb_decref() to decrement the reference counter.
These functions are taken from the existing tcf_block_cb_priv(),
tcf_block_cb_incref() and tcf_block_cb_decref().
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds the list handling functions for the flow block API:
* flow_block_cb_lookup() allows drivers to look up for existing flow blocks.
* flow_block_cb_add() adds a flow block to the per driver list to be registered
by the core.
* flow_block_cb_remove() to remove a flow block from the list of existing
flow blocks per driver and to request the core to unregister this.
The flow block API also annotates the netns this flow block belongs to.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a new helper function to allocate flow_block_cb objects.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Rename from TCF_BLOCK_BINDER_TYPE_* to FLOW_BLOCK_BINDER_TYPE_* and
remove temporary tcf_block_binder_type alias.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Rename from TC_BLOCK_{UN}BIND to FLOW_BLOCK_{UN}BIND and remove
temporary tc_block_command alias.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Most drivers do the same thing to set up the flow block callbacks, this
patch adds a helper function to do this.
This preparation patch reduces the number of changes to adapt the
existing drivers to use the flow block callback API.
This new helper function takes a flow block list per-driver, which is
set to NULL until this driver list is used.
This patch also introduces the flow_block_command and
flow_block_binder_type enumerations, which are renamed to use
FLOW_BLOCK_* in follow up patches.
There are three definitions (aliases) in order to reduce the number of
updates in this patch, which go away once drivers are fully adapted to
use this flow block API.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Jiangfeng Xiao says:
====================
net: hisilicon: Add support for HI13X1 to hip04_eth
The main purpose of this patch series is to extend the
hip04_eth driver to support HI13X1_GMAC.
The offset and bitmap of some registers of HI13X1_GMAC
are different from hip04_eth common soc. In addition,
the definition of send descriptor and parsing descriptor
are different from hip04_eth common soc. So the macro
of the register offset is redefined to adapt the HI13X1_GMAC.
Clean up the sparse warning by the way.
Change since v1:
* Add a cover letter.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
HI13X1 changed the offsets and bitmaps for tx_desc
registers in the same peripheral device on different
models of the hip04_eth.
Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
HI13X1 changed the offsets and bitmaps for rx_desc
registers in the same peripheral device on different
models of the hip04_eth.
Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The buf unit size of HI13X1_GMAC is cache_line_size,
which is 64, so the address we write to the buf register
needs to be shifted right by 6 bits.
The 31st bit of the PPE_CFG_CPU_ADD_ADDR register
of HI13X1_GMAC indicates whether to release the buffer
of the message, and the low indicates that it is valid.
Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In general, group is the same as the port, but some
boards specify a special group for better load
balancing of each processing unit.
Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In general, group is the same as the port, but some
boards specify a special group for better load
balancing of each processing unit.
Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
HI13X1_GMAC delete request for soft reset at first,
otherwise, the subsequent initialization will not
take effect.
Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
HI13X1_GMAC changed the offsets and bitmaps for
GE_TX_LOCAL_PAGE_REG registers in the same peripheral
device on different models of the hip04_eth. With the
default configuration, HI13X1_GMAC can also work without
any writes to the GE_TX_LOCAL_PAGE_REG register.
Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch fixes the following warning from sparse:
hip04_eth.c:533:23: warning: cast to restricted __be16
hip04_eth.c:533:23: warning: cast to restricted __be16
hip04_eth.c:533:23: warning: cast to restricted __be16
hip04_eth.c:533:23: warning: cast to restricted __be16
hip04_eth.c:534:23: warning: cast to restricted __be32
hip04_eth.c:534:23: warning: cast to restricted __be32
hip04_eth.c:534:23: warning: cast to restricted __be32
hip04_eth.c:534:23: warning: cast to restricted __be32
hip04_eth.c:534:23: warning: cast to restricted __be32
hip04_eth.c:534:23: warning: cast to restricted __be32
Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch fixes the following warning from sparse:
hip04_eth.c:468:25: warning: incorrect type in assignment
hip04_eth.c:468:25: expected unsigned int [usertype] send_addr
hip04_eth.c:468:25: got restricted __be32 [usertype]
hip04_eth.c:469:25: warning: incorrect type in assignment
hip04_eth.c:469:25: expected unsigned int [usertype] send_size
hip04_eth.c:469:25: got restricted __be32 [usertype]
hip04_eth.c:470:19: warning: incorrect type in assignment
hip04_eth.c:470:19: expected unsigned int [usertype] cfg
hip04_eth.c:470:19: got restricted __be32 [usertype]
hip04_eth.c:472:23: warning: incorrect type in assignment
hip04_eth.c:472:23: expected unsigned int [usertype] wb_addr
hip04_eth.c:472:23: got restricted __be32 [usertype]
Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Extend the hip04_eth driver to support HI13X1_GMAC.
Enable it with CONFIG_HI13X1_GMAC option.
Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Biao Huang says:
====================
stmmac: fix out-of-boundary issue and add taller hash table support
Fix mac address out-of-boundary issue in net-next tree.
and resend the patch which was discussed in
https://lore.kernel.org/patchwork/patch/1082117
but with no further progress.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
1. get hash table size in hw feature reigster, and add support
for taller hash table(128/256) in dwmac4.
2. only clear GMAC_PACKET_FILTER bits used in this function,
to avoid side effect to functions of other bits.
stmmac selftests output log with flow control on:
ethtool -t eth0
The test result is PASS
The test extra info:
1. MAC Loopback 0
2. PHY Loopback -95
3. MMC Counters 0
4. EEE -95
5. Hash Filter MC 0
6. Perfect Filter UC 0
7. MC Filter 0
8. UC Filter 0
9. Flow Control 0
Signed-off-by: Biao Huang <biao.huang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The mac address array size is GMAC_MAX_PERFECT_ADDRESSES,
so the 'reg' should be less than it, or will affect other registers.
Signed-off-by: Biao Huang <biao.huang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Lucas Bates says:
====================
tc-testing: Add plugin for simple traffic generation
This series supersedes the previous submission that included a patch for test
case verification using JSON output. It adds a new tdc plugin, scapyPlugin, as
a way to send traffic to test tc filters and actions.
The first patch makes a change to the TdcPlugin module that will allow tdc
plugins to examine the test case currently being executed, so plugins can
play a more active role in testing by accepting information or commands from
the test case. This is required for scapyPlugin to work.
The second patch adds scapyPlugin itself, and an example test case file to
demonstrate how the scapy block works in the test cases.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The scapyPlugin allows for simple traffic generation in tdc to
test various tc features. It was tested with scapy v2.4.2, but
should work with any successive version.
In order to use the plugin's functionality, scapy must be
installed. This can be done with:
pip3 install scapy
or to install 2.4.2:
pip3 install scapy==2.4.2
If the plugin is unable to import the scapy module, it will
terminate the tdc run.
The plugin makes use of a new key in the test case data, 'scapy'.
This block contains three other elements: 'iface', 'count', and
'packet':
"scapy": {
"iface": "$DEV0",
"count": 1,
"packet": "Ether(type=0x800)/IP(src='16.61.16.61')/ICMP()"
},
* iface is the name of the device on the host machine from which
the packet(s) will be sent. Values contained within tdc_config.py's
NAMES dict can be used here - this is useful if paired with
nsPlugin
* count is the number of copies of this packet to be sent
* packet is a string detailing the different layers of the packet
to be sent. If a property isn't explicitly set, scapy will set
default values for you.
Layers in the packet info are separated by slashes. For info about
common TCP and IP properties, see:
https://blogs.sans.org/pen-testing/files/2016/04/ScapyCheatSheet_v0.2.pdf
Caution is advised when running tests using the scapy functionality,
since the plugin blindly sends the packet as defined in the test case
data.
See creating-testcases/scapy-example.json for sample test cases;
the first test is intended to pass while the second is intended to
fail.
Signed-off-by: Lucas Bates <lucasb@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Instead of only passing the test case name and ID, pass the
entire current test case down to the plugins. This change
allows plugins to start accepting commands and directives
from the test cases themselves, for greater flexibility
in testing.
Signed-off-by: Lucas Bates <lucasb@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
KASAN shows the following splat during boot:
BUG: KASAN: unknown-crash in unwind_next_frame+0x3f6/0x490
Read of size 8 at addr ffffffff84007db0 by task swapper/0
CPU: 0 PID: 0 Comm: swapper Tainted: G T 5.2.0-rc6-00013-g7457c0d #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
Call Trace:
dump_stack+0x19/0x1b
print_address_description+0x1b0/0x2b2
__kasan_report+0x10f/0x171
kasan_report+0x12/0x1c
__asan_load8+0x54/0x81
unwind_next_frame+0x3f6/0x490
unwind_next_frame+0x1b/0x23
arch_stack_walk+0x68/0xa5
stack_trace_save+0x7b/0xa0
save_trace+0x3c/0x93
mark_lock+0x1ef/0x9b1
lock_acquire+0x122/0x221
__mutex_lock+0xb6/0x731
mutex_lock_nested+0x16/0x18
_vm_unmap_aliases+0x141/0x183
vm_unmap_aliases+0x14/0x16
change_page_attr_set_clr+0x15e/0x2f2
set_memory_4k+0x2a/0x2c
check_bugs+0x11fd/0x1298
start_kernel+0x793/0x7eb
x86_64_start_reservations+0x55/0x76
x86_64_start_kernel+0x87/0xaa
secondary_startup_64+0xa4/0xb0
Memory state around the buggy address:
ffffffff84007c80: 00 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1
ffffffff84007d00: f1 00 00 00 00 00 00 00 00 00 f2 f2 f2 f3 f3 f3
>ffffffff84007d80: f3 79 be 52 49 79 be 00 00 00 00 00 00 00 00 f1
It turns out that int3_selftest() is corrupting the stack. The problem is
that the KASAN-ified version of int3_magic() is much less trivial than the
C code appears. It clobbers several unexpected registers. So when the
selftest's INT3 is converted to an emulated call to int3_magic(), the
registers are clobbered and Bad Things happen when the function returns.
Fix this by converting int3_magic() to the trivial ASM function it should
be, avoiding all calling convention issues. Also add ASM_CALL_CONSTRAINT to
the INT3 ASM, since it contains a 'CALL'.
[peterz: cribbed changelog from josh]
Fixes: 7457c0da024b ("x86/alternatives: Add int3_emulate_call() selftest")
Reported-by: kernel test robot <rong.a.chen@intel.com>
Debugged-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20190709125744.GB3402@hirez.programming.kicks-ass.net
|
|
INFO: task syz-executor.5:8634 blocked for more than 143 seconds.
Not tainted 5.2.0-rc5+ #3
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
syz-executor.5 D25632 8634 8224 0x00004004
Call Trace:
context_switch kernel/sched/core.c:2818 [inline]
__schedule+0x658/0x9e0 kernel/sched/core.c:3445
schedule+0x131/0x1d0 kernel/sched/core.c:3509
schedule_timeout+0x9a/0x2b0 kernel/time/timer.c:1783
do_wait_for_common+0x35e/0x5a0 kernel/sched/completion.c:83
__wait_for_common kernel/sched/completion.c:104 [inline]
wait_for_common kernel/sched/completion.c:115 [inline]
wait_for_completion+0x47/0x60 kernel/sched/completion.c:136
kthread_stop+0xb4/0x150 kernel/kthread.c:559
io_sq_thread_stop fs/io_uring.c:2252 [inline]
io_finish_async fs/io_uring.c:2259 [inline]
io_ring_ctx_free fs/io_uring.c:2770 [inline]
io_ring_ctx_wait_and_kill+0x268/0x880 fs/io_uring.c:2834
io_uring_release+0x5d/0x70 fs/io_uring.c:2842
__fput+0x2e4/0x740 fs/file_table.c:280
____fput+0x15/0x20 fs/file_table.c:313
task_work_run+0x17e/0x1b0 kernel/task_work.c:113
tracehook_notify_resume include/linux/tracehook.h:185 [inline]
exit_to_usermode_loop arch/x86/entry/common.c:168 [inline]
prepare_exit_to_usermode+0x402/0x4f0 arch/x86/entry/common.c:199
syscall_return_slowpath+0x110/0x440 arch/x86/entry/common.c:279
do_syscall_64+0x126/0x140 arch/x86/entry/common.c:304
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x412fb1
Code: 80 3b 7c 0f 84 c7 02 00 00 c7 85 d0 00 00 00 00 00 00 00 48 8b 05 cf
a6 24 00 49 8b 14 24 41 b9 cb 2a 44 00 48 89 ee 48 89 df <48> 85 c0 4c 0f
45 c8 45 31 c0 31 c9 e8 0e 5b 00 00 85 c0 41 89 c7
RSP: 002b:00007ffe7ee6a180 EFLAGS: 00000293 ORIG_RAX: 0000000000000003
RAX: 0000000000000000 RBX: 0000000000000004 RCX: 0000000000412fb1
RDX: 0000001b2d920000 RSI: 0000000000000000 RDI: 0000000000000003
RBP: 0000000000000001 R08: 00000000f3a3e1f8 R09: 00000000f3a3e1fc
R10: 00007ffe7ee6a260 R11: 0000000000000293 R12: 000000000075c9a0
R13: 000000000075c9a0 R14: 0000000000024c00 R15: 000000000075bf2c
=============================================
There is an wrong logic, when kthread_park running
in front of io_sq_thread.
CPU#0 CPU#1
io_sq_thread_stop: int kthread(void *_create):
kthread_park()
__kthread_parkme(self); <<< Wrong
kthread_stop()
<< wait for self->exited
<< clear_bit KTHREAD_SHOULD_PARK
ret = threadfn(data);
|
|- io_sq_thread
|- kthread_should_park() << false
|- schedule() <<< nobody wake up
stuck CPU#0 stuck CPU#1
So, use a new variable sqo_thread_started to ensure that io_sq_thread
run first, then io_sq_thread_stop.
Reported-by: syzbot+94324416c485d422fe15@syzkaller.appspotmail.com
Suggested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jackie Liu <liuyun01@kylinos.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This is done through IORING_OP_RECVMSG. This opcode uses the same
sqe->msg_flags that IORING_OP_SENDMSG added, and we pass in the
msghdr struct in the sqe->addr field as well.
We use MSG_DONTWAIT to force an inline fast path if recvmsg() doesn't
block, and punt to async execution if it would have.
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This is done through IORING_OP_SENDMSG. There's a new sqe->msg_flags
for the flags argument, and the msghdr struct is passed in the
sqe->addr field.
We use MSG_DONTWAIT to force an inline fast path if sendmsg() doesn't
block, and punt to async execution if it would have.
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The restructuring of the driver got the dependencies wrong: without
CONFIG_NET_DSA we get this build failure:
WARNING: unmet direct dependencies detected for NET_DSA_VITESSE_VSC73XX
Depends on [n]: NETDEVICES [=y] && HAVE_NET_DSA [=y] && OF [=y] && NET_DSA [=n]
Selected by [m]:
- NET_DSA_VITESSE_VSC73XX_PLATFORM [=m] && NETDEVICES [=y] && HAVE_NET_DSA [=y] && HAS_IOMEM [=y]
ERROR: "dsa_unregister_switch" [drivers/net/dsa/vitesse-vsc73xx-core.ko] undefined!
ERROR: "dsa_switch_alloc" [drivers/net/dsa/vitesse-vsc73xx-core.ko] undefined!
ERROR: "dsa_register_switch" [drivers/net/dsa/vitesse-vsc73xx-core.ko] undefined!
Add the appropriate dependencies.
Fixes: 95711cd5f0b4 ("net: dsa: vsc73xx: Split vsc73xx driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
