summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-09-17watchdog: ziirave_wdt: Zero out only what's necessaryAndrey Smirnov
Instead of zeroing out all of the packet and then overwriting a significant portion of those zeros via memcpy(), zero out only a portion of the packet that is known to not contain any data. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-11-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Fix incorrect use of ARRAY_SIZEAndrey Smirnov
Both memset() and ziirave_firm_write_block_data() expect length in bytes as an argument, not a number of elements in array. It just happens that in this particular case both values are equal. Modify the code to use sizeof() instead. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-10-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Skip zeros when calculating checksumAndrey Smirnov
Zeros don't contribute anything to checksum value, so we can skip unused portion of the packet when calculating its checksum. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-9-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Check packet length only onceAndrey Smirnov
We don't need to check for packet length more than once, so drop the extra check in ziirave_firm_upload(). While at it move the check at the very start of __ziirave_firm_write_pkt(), as to not waste any time preparing a packet we'll never use. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-8-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Simplify ziirave_firm_write_pkt()Andrey Smirnov
There no reason why ziirave_firm_write_pkt() has to take firmware data via 'struct ihex_binrec' and it can just take address, data pointer and data length as individual arguments. Make this change to allow us to drastically simplify handling page crossing case by removing all of the extra code required to split 'struct ihex_binrec' into two. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-7-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Log bootloader/firmware info during probeAndrey Smirnov
Log bootloader/firmware info during probe. This information is available via sysfs already, but it's really helpful to have this in kernel log during startup as well. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-6-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Don't bail out on unexpected timeout valueAndrey Smirnov
Reprogramming bootloader on watchdog MCU will result in reported default timeout value of "0". That in turn will be unnecessarily rejected by the driver as invalid device (-ENODEV). Simplify probe to read stored timeout value, set it to a sane default if it is bogus, and then program that value unconditionally. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-5-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Be more verbose during firmware updateAndrey Smirnov
Add more error logging to ziirave_firm_upload() for diagnostics. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-4-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Be verbose about errors in probe()Andrey Smirnov
The driver is quite silent in case of probe failure, which makes it more difficult to diagnose problem from the kernel log. Add logging to all of the silent error paths ziirave_wdt_probe() to improve that. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-3-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Add missing newlineAndrey Smirnov
Add missing newline. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-2-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: imx_sc: Remove unnecessary error logAnson Huang
An error message is already displayed by watchdog_register_device() when failed, so no need to have error log again for failure of calling devm_watchdog_register_device(). Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812084434.13316-1-Anson.Huang@nxp.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: imx2_wdt: fix min() calculation in imx2_wdt_set_timeoutRasmus Villemoes
Converting from ms to s requires dividing by 1000, not multiplying. So this is currently taking the smaller of new_timeout and 1.28e8, i.e. effectively new_timeout. The driver knows what it set max_hw_heartbeat_ms to, so use that value instead of doing a division at run-time. FWIW, this can easily be tested by booting into a busybox shell and doing "watchdog -t 5 -T 130 /dev/watchdog" - without this patch, the watchdog fires after 130&127 == 2 seconds. Fixes: b07e228eee69 "watchdog: imx2_wdt: Fix set_timeout for big timeout values" Cc: stable@vger.kernel.org # 5.2 plus anything the above got backported to Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812131356.23039-1-linux@rasmusvillemoes.dk Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: cpwd: use generic compat_ptr_ioctlArnd Bergmann
The cpwd_compat_ioctl() contains a bogus mutex that dates back to a leftover BKL instance. Simplify the implementation by using the new compat_ptr_ioctl() helper function that will do the right thing for all calls here. Note that WIOCSTART/WIOCSTOP don't take any arguments, so the compat_ptr() conversion is not needed here, but it also doesn't hurt. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190814204259.120942-6-arnd@arndb.de Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: diag288_wdt: Remove leftover includes from conversion to watchdog APIGuenter Roeck
Commit f7a94db4e959 ("s390/watchdog: use watchdog API") converted the driver to use the watchdog API, but some includes as well as MODULE_ALIAS_MISCDEV() were missed. Cc: Philipp Hachtmann <phacht@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17Merge branch 'linux-5.4' of git://github.com/skeggsb/linux into drm-nextDave Airlie
A couple of fixes from Thierry fixing issues as a result of the reservation object rework in this cycle, as well as a fix from Lyude to allow the driver to load on Thinkpad P71. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Ben Skeggs <skeggsb@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CACAvsv5bLthhq7kh04A0JKxGnBdOTCxiu0hs7FZ1x3_9Rc9YoA@mail.gmail.com
2019-09-17mailbox: qcom-apcs: fix max_register valueJorge Ramirez-Ortiz
The mailbox length is 0x1000 hence the max_register value is 0xFFC. Fixes: c6a8b171ca8e ("mailbox: qcom: Convert APCS IPC driver to use regmap") Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2019-09-17mailbox: qcom: Add support for IPQ8074 APCSGokul Sriram Palanisamy
Add support of IPQ8074 with IPC register offset as 8. Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org> Signed-off-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2019-09-17dt-bindings: mailbox: qom: Add ipq8074 APPS compatibleGokul Sriram Palanisamy
Add mailbox support required in IPQ8074 SoCs. Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org> Signed-off-by: Sricharan R <sricharan@codeaurora.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2019-09-17mailbox: qcom: Add support for Qualcomm SM8150 and SC7180 SoCsSibi Sankar
Add the corresponding APSS shared offset for SM8150 and SC7180 SoCs. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2019-09-17dt-bindings: mailbox: Add APSS shared for SM8150 and SC7180 SoCsSibi Sankar
Add SM8150 and SC7180 APSS shared to the list of possible bindings. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2019-09-17mbox: qcom: replace integer with valid macroJorge Ramirez-Ortiz
Use the correct macro when registering the platform device. Co-developed-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2019-09-17mbox: qcom: add APCS child device for QCS404Jorge Ramirez-Ortiz
There is clock controller functionality in the APCS hardware block of qcs404 devices similar to msm8916. Co-developed-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2019-09-17Merge tag 'drm-intel-next-fixes-2019-09-11' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next Few fixes on GGTT and PPGTT around pin, locks, fence and vgpu. This also includes GVT fixes with two recent fixes: one for recent guest hang regression and another for guest reset fix. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190911233309.GA18449@intel.com
2019-09-17mailbox: mediatek: cmdq: clear the event in cmdq initial flowBibby Hsieh
GCE hardware stored event information in own internal sysram, if the initial value in those sysram is not zero value it will cause a situation that gce can wait the event immediately after client ask gce to wait event but not really trigger the corresponding hardware. In order to make sure that the wait event function is exactly correct, we need to clear the sysram value in cmdq initial flow. Fixes: 623a6143a845 ("mailbox: mediatek: Add Mediatek CMDQ driver") Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com> Reviewed-by: CK Hu <ck.hu@mediatek.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2019-09-17mailbox: mediatek: cmdq: support mt8183 gce functionBibby Hsieh
add mt8183 compatible name for supporting gce function Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com> Reviewed-by: CK Hu <ck.hu@mediatek.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2019-09-17mailbox: mediatek: cmdq: move the CMDQ_IRQ_MASK into cmdq driver dataBibby Hsieh
The interrupt mask and thread number has positive correlation, so we move the CMDQ_IRQ_MASK into cmdq driver data and calculate it by thread number. Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com> Reviewed-by: CK Hu <ck.hu@mediatek.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2019-09-17dt-binding: gce: add binding for gce client reg propertyBibby Hsieh
cmdq driver provide a function that get the relationship of sub system number from device node for client. add specification for #subsys-cells, mediatek,gce-client-reg. Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2019-09-17dt-binding: gce: add gce header file for mt8183Bibby Hsieh
Add documentation for the mt8183 gce. Add gce header file defined the gce hardware event, subsys number and constant for mt8183. Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2019-09-17dt-binding: gce: remove thread-num propertyBibby Hsieh
"thread-num" is an unused property so we remove it from example. Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2019-09-17mailbox: armada-37xx-rwtm: Use device-managed registration APIChuhong Yuan
Use devm_mbox_controller_register to get rid of redundant remove function. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2019-09-17Merge tag 'drm-misc-next-fixes-2019-09-06' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next - A significant number of panfrost fixes for runtime_pm, MMU and GEM support - A fix for DCS transfers on mcde Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190906070500.dfxacpgxoxalcha3@flea
2019-09-17Merge tag 'drm-msm-next-2019-09-06' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/msm into drm-next + move msm8998 (snapdragon 835) display support + dpu fixes/cleanup + better async commit support for cursor updates (for dpu for now, I'll add mdp5 and possibly mdp4 once the movers deliver boxes full of my older hardware, so for v5.5) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGuKVayu9bCuVe1RhzS6N6sHTrv4SVAh=qyCrmubX24Xag@mail.gmail.com
2019-09-17drm/nouveau/bar/gm20b: Avoid BAR1 teardown during initThierry Reding
Writing the 0x1704 (BUS_BAR1_BLOCK) register causes the GPU to probe the memory region at the programmed address. The result is an address decode error in the external memory controller because address 0, which is what is written to the register, is not designated as accessible to devices. Avoid triggering DMA from the GPU by removing teardown of the BAR1. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2019-09-17drm/nouveau: Fix ordering between TTM and GEM releaseThierry Reding
When the last reference to a TTM BO is dropped, ttm_bo_release() will acquire the DMA reservation object's wound/wait mutex while trying to clean up (ttm_bo_cleanup_refs_or_queue() via ttm_bo_release()). It is therefore essential that drm_gem_object_release() be called after the TTM BO has been uninitialized, otherwise drm_gem_object_release() has already destroyed the wound/wait mutex (via dma_resv_fini()). Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2019-09-17drm/nouveau/prime: Extend DMA reservation object lockThierry Reding
Prior to commit 019cbd4a4feb ("drm/nouveau: Initialize GEM object before TTM object"), the reservation object was locked across all of the buffer object creation. After splitting nouveau_bo_new() into separate nouveau_bo_alloc() and nouveau_bo_init() functions, the reservation object is passed to the latter, so the lock needs to be held across that function as well. Fixes: 019cbd4a4feb ("drm/nouveau: Initialize GEM object before TTM object") Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2019-09-17drm/nouveau: Fix fallout from reservation object reworkThierry Reding
Commit 019cbd4a4feb ("drm/nouveau: Initialize GEM object before TTM object") introduced a subtle change in how the buffer allocation size is handled. Prior to that change, the size would get aligned to at least a page, whereas after that change a non-page-aligned size would get passed through unmodified. This ultimately causes a BUG_ON() to trigger in drm_gem_private_object_init() and crashes the system. Fix this by restoring the code that align the allocation size. Fixes: 019cbd4a4feb ("drm/nouveau: Initialize GEM object before TTM object") Reported-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2019-09-17drm/nouveau/kms/nv50-: Don't create MSTMs for eDP connectorsLyude Paul
On the ThinkPad P71, we have one eDP connector exposed along with 5 DP connectors, resulting in a total of 11 TMDS encoders. Since the GPU on this system is also capable of MST, we create an additional 4 fake MST encoders for each DP port. Unfortunately, we also do this for the eDP port as well, resulting in: 1 eDP port: +1 TMDS encoder +4 DPMST encoders 5 DP ports: +2 TMDS encoders +4 DPMST encoders *5 ports == 35 encoders Which breaks things, since DRM has a hard coded limit of 32 encoders. So, fix this by not creating MSTMs for any eDP connectors. This brings us down to 31 encoders, although we can do better. This fixes driver probing for nouveau on the ThinkPad P71. Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2019-09-16Merge tag 'platform-drivers-x86-v5.4-1' of ↵Linus Torvalds
git://git.infradead.org/linux-platform-drivers-x86 Pull x86 platform-drivers updates from Andy Shevchenko: - ASUS WMI driver got a couple of updates, i.e. support of FAN is fixed for recent products and the charge threshold support has been added - Two uknown key events for Dell laptops are being ignored now to avoid spamming users with harmless messages - HP ZBook 17 G5 and ASUS Zenbook UX430UNR got accelerometer support. - Intel CherryTrail platforms had a regression with wake up. Now it's fixed - Intel PMC driver got fixed in order to work nicely in Xen environment - Intel Speed Select driver provides bucket vs core count relationship. Besides that the tools has been updated for better output - The PrivacyGuard is enabled on Lenovo ThinkPad laptops - Three tablets - Trekstor Primebook C11B 2-in-1, Irbis TW90 and Chuwi Surbook Mini - got touchscreen support * tag 'platform-drivers-x86-v5.4-1' of git://git.infradead.org/linux-platform-drivers-x86: (53 commits) MAINTAINERS: Switch PDx86 subsystem status to Odd Fixes platform/x86: asus-wmi: Refactor charge threshold to use the battery hooking API platform/x86: asus-wmi: Rename CHARGE_THRESHOLD to RSOC platform/x86: asus-wmi: Reorder ASUS_WMI_CHARGE_THRESHOLD tools/power/x86/intel-speed-select: Display core count for bucket platform/x86: ISST: Allow additional TRL MSRs tools/power/x86/intel-speed-select: Fix memory leak tools/power/x86/intel-speed-select: Output success/failed for command output tools/power/x86/intel-speed-select: Output human readable CPU list tools/power/x86/intel-speed-select: Change turbo ratio output to maximum turbo frequency tools/power/x86/intel-speed-select: Switch output to MHz tools/power/x86/intel-speed-select: Simplify output for turbo-freq and base-freq tools/power/x86/intel-speed-select: Fix cpu-count output tools/power/x86/intel-speed-select: Fix help option typo tools/power/x86/intel-speed-select: Fix package typo tools/power/x86/intel-speed-select: Fix a read overflow in isst_set_tdp_level_msr() platform/x86: intel_int0002_vgpio: Use device_init_wakeup platform/x86: intel_int0002_vgpio: Fix wakeups not working on Cherry Trail platform/x86: compal-laptop: Initialize "value" in ec_read_u8() platform/x86: touchscreen_dmi: Add info for the Trekstor Primebook C11B 2-in-1 ...
2019-09-16Merge branch 'x86-vmware-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 vmware updates from Ingo Molnar: "This updates the VMWARE guest driver with support for VMCALL/VMMCALL based hypercalls" * 'x86-vmware-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: input/vmmouse: Update the backdoor call with support for new instructions drm/vmwgfx: Update the backdoor call with support for new instructions x86/vmware: Add a header file for hypercall definitions x86/vmware: Update platform detection code for VMCALL/VMMCALL hypercalls
2019-09-16Merge branch 'x86-hyperv-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 hyperv updates from Ingo Molnar: "Misc updates related to page size abstractions within the HyperV code, in preparation for future features" * 'x86-hyperv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: drivers: hv: vmbus: Replace page definition with Hyper-V specific one x86/hyperv: Add functions to allocate/deallocate page for Hyper-V x86/hyperv: Create and use Hyper-V page definitions
2019-09-16Merge branch 'x86-platform-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 platform update from Ingo Molnar: "The biggest change is the rework of the intel/iosf_mbi locking code which used a few non-standard locking patterns, to make it work under lockdep" * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/platform/uv: Fix kmalloc() NULL check routine x86/platform/intel/iosf_mbi Rewrite locking
2019-09-16Merge branch 'x86-mm-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 mm updates from Ingo Molnar: - Make cpumask_of_node() more robust against invalid node IDs - Simplify and speed up load_mm_cr4() - Unexport and remove various unused set_memory_*() APIs - Misc cleanups * 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Fix cpumask_of_node() error condition x86/mm: Remove the unused set_memory_wt() function x86/mm: Remove set_pages_x() and set_pages_nx() x86/mm: Remove the unused set_memory_array_*() functions x86/mm: Unexport set_memory_x() and set_memory_nx() x86/fixmap: Cleanup outdated comments x86/kconfig: Remove X86_DIRECT_GBPAGES dependency on !DEBUG_PAGEALLOC x86/mm: Avoid redundant interrupt disable in load_mm_cr4()
2019-09-16Merge branch 'x86-entry-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 entry updates from Ingo Molnar: "This contains x32 and compat syscall improvements, the biggest one of which splits x32 syscalls into their own table, which allows new syscalls to share the x32 and x86-64 number - which turns the 512-547 special syscall numbers range into a legacy wart that won't be extended going forward" * 'x86-entry-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/syscalls: Split the x32 syscalls into their own table x86/syscalls: Disallow compat entries for all types of 64-bit syscalls x86/syscalls: Use the compat versions of rt_sigsuspend() and rt_sigprocmask() x86/syscalls: Make __X32_SYSCALL_BIT be unsigned long
2019-09-16Merge branch 'x86-cpu-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cpu-feature updates from Ingo Molnar: - Rework the Intel model names symbols/macros, which were decades of ad-hoc extensions and added random noise. It's now a coherent, easy to follow nomenclature. - Add new Intel CPU model IDs: - "Tiger Lake" desktop and mobile models - "Elkhart Lake" model ID - and the "Lightning Mountain" variant of Airmont, plus support code - Add the new AVX512_VP2INTERSECT instruction to cpufeatures - Remove Intel MPX user-visible APIs and the self-tests, because the toolchain (gcc) is not supporting it going forward. This is the first, lowest-risk phase of MPX removal. - Remove X86_FEATURE_MFENCE_RDTSC - Various smaller cleanups and fixes * 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits) x86/cpu: Update init data for new Airmont CPU model x86/cpu: Add new Airmont variant to Intel family x86/cpu: Add Elkhart Lake to Intel family x86/cpu: Add Tiger Lake to Intel family x86: Correct misc typos x86/intel: Add common OPTDIFFs x86/intel: Aggregate microserver naming x86/intel: Aggregate big core graphics naming x86/intel: Aggregate big core mobile naming x86/intel: Aggregate big core client naming x86/cpufeature: Explain the macro duplication x86/ftrace: Remove mcount() declaration x86/PCI: Remove superfluous returns from void functions x86/msr-index: Move AMD MSRs where they belong x86/cpu: Use constant definitions for CPU models lib: Remove redundant ftrace flag removal x86/crash: Remove unnecessary comparison x86/bitops: Use __builtin_constant_p() directly instead of IS_IMMEDIATE() x86: Remove X86_FEATURE_MFENCE_RDTSC x86/mpx: Remove MPX APIs ...
2019-09-16Merge branch 'x86-build-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 build cleanup from Ingo Molnar: "A single change that removes unnecessary asm-generic wrappers" * 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/build: Remove unneeded uapi asm-generic wrappers
2019-09-16Merge branch 'x86-boot-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 boot code cleanup from Ingo Molnar: "Clean up the BUILD_BUG_ON() definition which can cause build warnings" * 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/boot: Use common BUILD_BUG_ON
2019-09-16Merge branch 'x86-asm-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 asm updates from Ingo Molnar: - Add UMIP emulation/spoofing for 64-bit processes as well, because of Wine based gaming. - Clean up symbols/labels in low level asm code - Add an assembly optimized mul_u64_u32_div() implementation on x86-64. * 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/umip: Add emulation (spoofing) for UMIP covered instructions in 64-bit processes as well x86/asm: Make some functions local labels x86/asm/suspend: Get rid of bogus_64_magic x86/math64: Provide a sane mul_u64_u32_div() implementation for x86_64
2019-09-16Merge branch 'sched-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Ingo Molnar: - MAINTAINERS: Add Mark Rutland as perf submaintainer, Juri Lelli and Vincent Guittot as scheduler submaintainers. Add Dietmar Eggemann, Steven Rostedt, Ben Segall and Mel Gorman as scheduler reviewers. As perf and the scheduler is getting bigger and more complex, document the status quo of current responsibilities and interests, and spread the review pain^H^H^H^H fun via an increase in the Cc: linecount generated by scripts/get_maintainer.pl. :-) - Add another series of patches that brings the -rt (PREEMPT_RT) tree closer to mainline: split the monolithic CONFIG_PREEMPT dependencies into a new CONFIG_PREEMPTION category that will allow the eventual introduction of CONFIG_PREEMPT_RT. Still a few more hundred patches to go though. - Extend the CPU cgroup controller with uclamp.min and uclamp.max to allow the finer shaping of CPU bandwidth usage. - Micro-optimize energy-aware wake-ups from O(CPUS^2) to O(CPUS). - Improve the behavior of high CPU count, high thread count applications running under cpu.cfs_quota_us constraints. - Improve balancing with SCHED_IDLE (SCHED_BATCH) tasks present. - Improve CPU isolation housekeeping CPU allocation NUMA locality. - Fix deadline scheduler bandwidth calculations and logic when cpusets rebuilds the topology, or when it gets deadline-throttled while it's being offlined. - Convert the cpuset_mutex to percpu_rwsem, to allow it to be used from setscheduler() system calls without creating global serialization. Add new synchronization between cpuset topology-changing events and the deadline acceptance tests in setscheduler(), which were broken before. - Rework the active_mm state machine to be less confusing and more optimal. - Rework (simplify) the pick_next_task() slowpath. - Improve load-balancing on AMD EPYC systems. - ... and misc cleanups, smaller fixes and improvements - please see the Git log for more details. * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits) sched/psi: Correct overly pessimistic size calculation sched/fair: Speed-up energy-aware wake-ups sched/uclamp: Always use 'enum uclamp_id' for clamp_id values sched/uclamp: Update CPU's refcount on TG's clamp changes sched/uclamp: Use TG's clamps to restrict TASK's clamps sched/uclamp: Propagate system defaults to the root group sched/uclamp: Propagate parent clamps sched/uclamp: Extend CPU's cgroup controller sched/topology: Improve load balancing on AMD EPYC systems arch, ia64: Make NUMA select SMP sched, perf: MAINTAINERS update, add submaintainers and reviewers sched/fair: Use rq_lock/unlock in online_fair_sched_group cpufreq: schedutil: fix equation in comment sched: Rework pick_next_task() slow-path sched: Allow put_prev_task() to drop rq->lock sched/fair: Expose newidle_balance() sched: Add task_struct pointer to sched_class::set_curr_task sched: Rework CPU hotplug task selection sched/{rt,deadline}: Fix set_next_task vs pick_next_task sched: Fix kerneldoc comment for ia64_set_curr_task ...
2019-09-16cifs: update internal module version numberSteve French
To 2.23 Signed-off-by: Steve French <stfrench@microsoft.com>
2019-09-16Merge branch 'perf-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates from Ingo Molnar: "Kernel side changes: - Improved kbprobes robustness - Intel PEBS support for PT hardware tracing - Other Intel PT improvements: high order pages memory footprint reduction and various related cleanups - Misc cleanups The perf tooling side has been very busy in this cycle, with over 300 commits. This is an incomplete high-level summary of the many improvements done by over 30 developers: - Lots of updates to the following tools: 'perf c2c' 'perf config' 'perf record' 'perf report' 'perf script' 'perf test' 'perf top' 'perf trace' - Updates to libperf and libtraceevent, and a consolidation of the proliferation of x86 instruction decoder libraries. - Vendor event updates for Intel and PowerPC CPUs, - Updates to hardware tracing tooling for ARM and Intel CPUs, - ... and lots of other changes and cleanups - see the shortlog and Git log for details" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (322 commits) kprobes: Prohibit probing on BUG() and WARN() address perf/x86: Make more stuff static x86, perf: Fix the dependency of the x86 insn decoder selftest objtool: Ignore intentional differences for the x86 insn decoder objtool: Update sync-check.sh from perf's check-headers.sh perf build: Ignore intentional differences for the x86 insn decoder perf intel-pt: Use shared x86 insn decoder perf intel-pt: Remove inat.c from build dependency list perf: Update .gitignore file objtool: Move x86 insn decoder to a common location perf metricgroup: Support multiple events for metricgroup perf metricgroup: Scale the metric result perf pmu: Change convert_scale from static to global perf symbols: Move mem_info and branch_info out of symbol.h perf auxtrace: Uninline functions that touch perf_session perf tools: Remove needless evlist.h include directives perf tools: Remove needless evlist.h include directives perf tools: Remove needless thread_map.h include directives perf tools: Remove needless thread.h include directives perf tools: Remove needless map.h include directives ...
generated by cgit (git 2.34.1) at 2025-09-15 23:39:15 +0000