summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-08-20ACPI: export symbol acpi_get_table_with_sizeAlex Deucher
We need it in the radeon drm module to fetch and verify the vbios image on UEFI systems. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2012-08-20drm/radeon: implement ACPI VFCT vbios fetch (v3)David Lamparter
This is required for pure UEFI systems. The vbios is stored in ACPI rather than at the legacy vga location. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=26891 V2: fix #ifdefs as per Greg's comments V3: fix it harder Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Cc: stable@vger.kernel.org
2012-08-20drm/radeon/kms: extend the Fujitsu D3003-S2 board connector quirk to cover ↵Tvrtko Ursulin
later silicon stepping There is a more recent APU stepping with a new PCI ID shipping in the same board by Fujitsu which needs the same quirk to correctly mark the back plane connectors. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@onelan.co.uk> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2012-08-20drm/radeon: fix checking of MSAA renderbuffers on r600-r700Marek Olšák
The MSAA checking was mostly unimplemented on r600-r700. The userspace submits GPU commands and the kernel driver computes how much memory the GPU will access and checks if it's all within buffer bounds the userspace allocated. This patch fixes the computations of the size of MSAA surfaces in memory. Signed-off-by: Marek Olšák <maraeo@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-20drm/radeon: allow CMASK and FMASK in the CS checker on r600-r700Marek Olšák
MSAA is impossible without them. Signed-off-by: Marek Olšák <maraeo@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com>
2012-08-20drm/radeon: init lockup timeout on ring initChristian König
Reset the lockup timeout on ring (re-)initialisation. Otherwise we get error messages like this on gpu resets: [ 1559.949177] radeon 0000:01:00.0: GPU lockup CP stall for more than 1482270msec Signed-off-by: Christian König <deathsimple@vodafone.de> cc: stable@vger.kernel.org Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
2012-08-20drm/radeon: avoid turning off spread spectrum for used pllJerome Glisse
If spread spectrum is enabled and in use for a given pll we should not turn it off as it will lead to turning off display for crtc that use the pll (this behavior was observed on chelsea edp). Signed-off-by: Jerome Glisse <jglisse@redhat.com> Cc: stable@vger.kernel.org Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-20mac80211: clean up ieee80211_subif_start_xmitJohannes Berg
There's no need to carry around a return value that is always NETDEV_TX_OK anyway. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20mac80211: pass channel to ieee80211_send_probe_reqJohannes Berg
In multi-channel scenarios, the channel that we will transmit a probe request on isn't always the current channel (which will be NULL anyway) but will instead be the channel that the AP is on. Pass the channel to the ieee80211_send_probe_req() function so it can be used in the different scenarios. The scan code continues to pass the current channel, of course. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20mac80211: convert ops checks to WARN_ONJohannes Berg
There's no need to BUG_ON when a driver registers invalid operations, warn and return an error. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20mac80211: check operating channel in scanJohannes Berg
The optimisation of scanning only on the current channel should check the operating channel. Also modify it to compare channel pointer rather than the frequency. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20mac80211: use RX status band instead of current bandJohannes Berg
Even for single-channel devices it is possible that we switch the channel temporarily (e.g. for scanning) but while doing so process a received frame that was still received on the old channel, so checking the current band is racy. Use the band from status instead. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20mac80211: don't assume channel is set in tracingJohannes Berg
With the move to multi-channel and away from drv_config(), hw.conf.channel will not always be set, only for devices using the current API instead of the new channel context APIs. Check the channel is set before adding its frequency to the trace data. Also break some overly long lines in the code. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20mac80211: use oper_channel in rate initJohannes Berg
Using hw.conf.channel is wrong as it could be the temporary channel if the station is added from the workqueue while the device is already on another channel. Use oper_channel instead. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20mac80211: remove freq/chantype from debugfsJohannes Berg
You can now get these values through iw, and they conflict with multi-channel work. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20mac80211: remove almost unused local variableJohannes Berg
In ieee80211_beacon_get_tim() we can use the txrc.sband instead of a separate local variable. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20mac80211: mesh: don't use global channel typeJohannes Berg
Using local->_oper_channel_type in the mesh code is completely wrong as this value is the combination of the various interface channel types and can be a different value from the mesh interface in case there are multiple virtual interfaces. Use sdata->vif.bss_conf.channel_type instead as it tracks the per-vif channel type. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20mac80211: simplify buffers in aes_128_cmac_vectorJohannes Berg
There's no need to use a single scratch buffer and calculate offsets into it, just use two separate buffers for the separate variables. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20mac80211_hwsim: add support for P2P DeviceJohannes Berg
Advertise support for P2P Device in hwsim to be able to test it. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20mac80211: add IEEE80211_HW_P2P_DEV_ADDR_FOR_INTFJohannes Berg
Some devices like the current iwlwifi implementation require that the P2P interface address match the P2P Device address (only one P2P interface is supported.) Add the HW flag IEEE80211_HW_P2P_DEV_ADDR_FOR_INTF that allows drivers to request that P2P Interfaces added while a P2P Device is active get the same MAC address by default. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20mac80211: support P2P Device abstractionJohannes Berg
After cfg80211 got a P2P Device abstraction, add support to mac80211. Whether it really is supported or not will depend on whether or not the driver has support for it, but mac80211 needs to change to be able to support drivers that need a P2P Device. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20cfg80211: add P2P Device abstractionJohannes Berg
In order to support using a different MAC address for the P2P Device address we must first have a P2P Device abstraction that can be assigned a MAC address. This abstraction will also be useful to support offloading P2P operations to the device, e.g. periodic listen for discoverability. Currently, the driver is responsible for assigning a MAC address to the P2P Device, but this could be changed by allowing a MAC address to be given to the NEW_INTERFACE command. As it has no associated netdev, a P2P Device can only be identified by its wdev identifier but the previous patches allowed using the wdev identifier in various APIs, e.g. remain-on-channel. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20mac80211: make ieee80211_beacon_connection_loss_work staticJohannes Berg
There's no need to declare the function in the header file since it's only used in a single place, so make it static. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20mac80211: check size of channel switch IE when parsingJohannes Berg
The channel switch IE has a fixed size, so we can discard it in parsing if it's not the right size and use the right struct pointer. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20mac80211: fix CSA handling timerJohannes Berg
The time until the channel switch is in TU, not in milliseconds, so use TU_TO_EXP_TIME() to correctly program the timer. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20mac80211: clean up CSA handling codeJohannes Berg
Clean up the CSA handling code by moving some of it out of the if and using a C99 initializer for the struct passed to the driver method. While at it, also add a comment that we should wait for a beacon after switching the channel. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20mac80211: remove unneeded 'bssid' variableJohannes Berg
There's no need to copy the BSSID just to print it, remove the unnecessary variable. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20mac80211: support A-MPDU status reportingJohannes Berg
Support getting A-MPDU status information from the drivers and reporting it to userspace via radiotap in the standard fields. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20wireless: add radiotap A-MPDU status fieldJohannes Berg
Define the A-MPDU status field in radiotap, also update the radiotap parser for it and the MCS field that was apparently missed last time. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20mac80211: add supported rates change notification in IBSSAntonio Quartulli
In IBSS it is possible that the supported rates set for a station changes over time (e.g. it gets first initialised as an empty set because of no available information about rates and updated later). In this case the driver has to be notified about the change in order to update its internal table accordingly (if needed). This behaviour is needed by all those drivers that handle rc internally but leave stations management to mac80211 Reported-by: Gui Iribarren <gui@altermundi.net> Signed-off-by: Antonio Quartulli <ordex@autistici.org> [Johannes - add docs, validate IBSS mode only, fix compilation] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20mac80211: clean up mpath_move_to_queue()Thomas Pedersen
Use skb_queue_walk_safe instead, and fix a few issues: - didn't free old skbs on moving - didn't react to failed skb alloc - needlessly held a local pointer to the destination frame queue - didn't check destination queue length before adding skb Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20mac80211: use skb_queue_walk() in mesh_path_assign_nexthopThomas Pedersen
Since all we really want is just to iterate over all skbs, do just that and avoid (de)queueing to a clusmy tmpq. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20mac80211: avoid using synchronize_rcu in ieee80211_set_probe_respEyal Shapira
This could take a while (100ms+) and may delay sending assoc resp in AP mode with WPS or P2P GO (as setting the probe resp takes place there). We've encountered situations where the delay was big enough to cause connection problems with devices like Galaxy Nexus. Switch to using call_rcu with a free handler. [Arik - rework to use plain buffer and instead of skb] Signed-off-by: Eyal Shapira <eyal@wizery.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20netfilter: nf_conntrack: remove unnecessary RTNL lockingPatrick McHardy
Locking the rtnl was added to nf_conntrack_l{3,4}_proto_unregister() for walking the network namespace list. This is not done anymore since we have proper namespace support in the protocols now, so we don't need to take the RTNL anymore. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2012-08-20netfilter: sparse endian fixesPatrick McHardy
Fix a couple of endian annotation in net/netfilter: net/netfilter/nfnetlink_acct.c:82:30: warning: cast to restricted __be64 net/netfilter/nfnetlink_acct.c:86:30: warning: cast to restricted __be64 net/netfilter/nfnetlink_cthelper.c:77:28: warning: cast to restricted __be16 net/netfilter/xt_NFQUEUE.c:46:16: warning: restricted __be32 degrades to integer net/netfilter/xt_NFQUEUE.c:60:34: warning: restricted __be32 degrades to integer net/netfilter/xt_NFQUEUE.c:68:34: warning: restricted __be32 degrades to integer net/netfilter/xt_osf.c:272:55: warning: cast to restricted __be16 Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2012-08-20netfilter: nfnetlink_log: fix NLA_PUT macro removal bugPatrick McHardy
Commit 1db20a52 (nfnetlink_log: Stop using NLA_PUT*().) incorrectly converted a NLA_PUT_BE16 macro to nla_put_be32() in nfnetlink_log: - NLA_PUT_BE16(inst->skb, NFULA_HWTYPE, htons(skb->dev->type)); + if (nla_put_be32(inst->skb, NFULA_HWTYPE, htons(skb->dev->type)) Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2012-08-20net: tcp: move sk_rx_dst_set call after tcp_create_openreq_child()Neal Cardwell
This commit removes the sk_rx_dst_set calls from tcp_create_openreq_child(), because at that point the icsk_af_ops field of ipv6_mapped TCP sockets has not been set to its proper final value. Instead, to make sure we get the right sk_rx_dst_set variant appropriate for the address family of the new connection, we have tcp_v{4,6}_syn_recv_sock() directly call the appropriate function shortly after the call to tcp_create_openreq_child() returns. This also moves inet6_sk_rx_dst_set() to avoid a forward declaration with the new approach. Signed-off-by: Neal Cardwell <ncardwell@google.com> Reported-by: Artem Savkov <artem.savkov@gmail.com> Cc: Eric Dumazet <edumazet@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-20net/core/dev.c: fix kernel-doc warningRandy Dunlap
Fix kernel-doc warning: Warning(net/core/dev.c:5745): No description found for parameter 'dev' Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-20netconsole: remove a redundant netconsole_target_put()Amerigo Wang
This netconsole_target_put() is obviously redundant, and it causes a kernel segfault when removing a bridge device which has netconsole running on it. This is caused by: commit 8d8fc29d02a33e4bd5f4fa47823c1fd386346093 Author: Amerigo Wang <amwang@redhat.com> Date: Thu May 19 21:39:10 2011 +0000 netpoll: disable netpoll when enslave a device Cc: David Miller <davem@davemloft.net> (for all 3.x stable releases) Cc: stable@vger.kernel.org Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-20pwm: Improve Kconfig help textThierry Reding
The Kconfig help text should help the user understand what functionality is provided by an option. This is especially true for new subsystems. An improved help text is provided by this commit in the hopes of clarifying the usefulness of the PWM framework. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Acked-by: Borislav Petkov <bp@alien8.de>
2012-08-20net: ipv6: fix oops in inet_putpeer()Patrick McHardy
Commit 97bab73f (inet: Hide route peer accesses behind helpers.) introduced a bug in xfrm6_policy_destroy(). The xfrm_dst's _rt6i_peer member is not initialized, causing a false positive result from inetpeer_ptr_is_peer(), which in turn causes a NULL pointer dereference in inet_putpeer(). Pid: 314, comm: kworker/0:1 Not tainted 3.6.0-rc1+ #17 To Be Filled By O.E.M. To Be Filled By O.E.M./P4S800D-X EIP: 0060:[<c03abf93>] EFLAGS: 00010246 CPU: 0 EIP is at inet_putpeer+0xe/0x16 EAX: 00000000 EBX: f3481700 ECX: 00000000 EDX: 000dd641 ESI: f3481700 EDI: c05e949c EBP: f551def4 ESP: f551def4 DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068 CR0: 8005003b CR2: 00000070 CR3: 3243d000 CR4: 00000750 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: ffff0ff0 DR7: 00000400 f551df04 c0423de1 00000000 f3481700 f551df18 c038d5f7 f254b9f8 f551df28 f34f85d8 f551df20 c03ef48d f551df3c c0396870 f30697e8 f24e1738 c05e98f4 f5509540 c05cd2b4 f551df7c c0142d2b c043feb5 f5509540 00000000 c05cd2e8 [<c0423de1>] xfrm6_dst_destroy+0x42/0xdb [<c038d5f7>] dst_destroy+0x1d/0xa4 [<c03ef48d>] xfrm_bundle_flo_delete+0x2b/0x36 [<c0396870>] flow_cache_gc_task+0x85/0x9f [<c0142d2b>] process_one_work+0x122/0x441 [<c043feb5>] ? apic_timer_interrupt+0x31/0x38 [<c03967eb>] ? flow_cache_new_hashrnd+0x2b/0x2b [<c0143e2d>] worker_thread+0x113/0x3cc Fix by adding a init_dst() callback to struct xfrm_policy_afinfo to properly initialize the dst's peer pointer. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-20net/stmmac: fix issue of clk_get for Loongson1B.Kelvin Cheung
When getting clock, give a chance to the CPUs without DT support, which use Common Clock Framework, such as Loongson1B. Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-20caif: Do not dereference NULL in chnl_recv_cb()Jesper Juhl
In net/caif/chnl_net.c::chnl_recv_cb() we call skb_header_pointer() which may return NULL, but we do not check for a NULL pointer before dereferencing it. This patch adds such a NULL check and properly free's allocated memory and return an error (-EINVAL) on failure - much better than crashing.. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Acked-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-20Merge git://1984.lsi.us.es/nfDavid S. Miller
Pable Neira Ayuso says: ==================== The following five patches contain fixes for 3.6-rc, they are: * Two fixes for message parsing in the SIP conntrack helper, from Patrick McHardy. * One fix for the SIP helper introduced in the user-space cthelper infrastructure, from Patrick McHardy. * fix missing appropriate locking while modifying one conntrack entry from the nfqueue integration code, from myself. * fix possible access to uninitiliazed timer in the nf_conntrack expectation infrastructure, from myself. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-20team: add support for non-ethernet devicesJiri Pirko
This is resolved by two things: 1) allow dev_addr of different length than ETH_ALEN 2) during port add, check for dev->type and change it if necessary Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-20Merge branch 'topic/ca0132-fix' into for-linusTakashi Iwai
This is a series of fixes for CA0132, especially the missing SPDIF I/O and the mixer build errors.
2012-08-20af_packet: don't emit packet on orig fanout groupEric Leblond
If a packet is emitted on one socket in one group of fanout sockets, it is transmitted again. It is thus read again on one of the sockets of the fanout group. This result in a loop for software which generate packets when receiving one. This retransmission is not the intended behavior: a fanout group must behave like a single socket. The packet should not be transmitted on a socket if it originates from a socket belonging to the same fanout group. This patch fixes the issue by changing the transmission check to take fanout group info account. Reported-by: Aleksandr Kotov <a1k@mail.ru> Signed-off-by: Eric Leblond <eric@regit.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-20ALSA: hda - don't create dysfunctional mixer controls for ca0132David Henningsson
It's possible that these amps are settable somehow, e g through secret codec verbs, but for now, don't create the controls (as they won't be working anyway, and cause errors in amixer). Cc: stable@kernel.org BugLink: https://bugs.launchpad.net/bugs/1038651 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-20drivers/net/irda: fix error return codeJulia Lawall
Convert a nonnegative error return code to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier ret; expression e1,e2; @@ if (ret < 0) { ... return ret; } ... when != ret = e1 when forall *if(...) { ... when != ret = e2 * return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-20drivers/net/wan/dscc4.c: fix error return codeJulia Lawall
Move up the initialization of rc so that failure of pci_alloc_consistent returns -ENOMEM as well. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier ret; expression e1,e2; @@ if (ret < 0) { ... return ret; } ... when != ret = e1 when forall *if(...) { ... when != ret = e2 * return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-24 12:53:06 +0000