summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-09-11mwifiex: remove AMSDU_AGGR_CTRL command response handlerAmitkumar Karwar
HostCmd_CMD_AMSDU_AGGR_CTRL is never called with GET action. So the code in mwifiex_ret_amsdu_aggr_ctrl() becomes redundant. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11mwifiex: remove 11N_CFG command response handlerAmitkumar Karwar
HostCmd_CMD_11N_CFG is never called with GET action. So the code in mwifiex_ret_11n_cfg() becomes redundant. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11mwifiex: remove get operation code for SUBSCRIBE EVENT commandAmitkumar Karwar
We don't send this command with GET action. Redundant code in mwifiex_ret_subsc_evt() is removed in this patch. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k_hw: add 8 points for 5G temp slopRajkumar Manoharan
Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k_hw: use peak detection for 5GHzRajkumar Manoharan
Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k_hw: Wait BT calibration to completeRajkumar Manoharan
Whenever BT calibration requested, WLAN has to wait for the calibration to be completed. But right now we defer the waiting which might cause BT calibration to fail. Fix that. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11rndis_wlan: remove pointless check from rndis_scan()Wei Yongjun
In rndis_scan(), 'request' is actually always valid pointer and the !request check is unneeded, so remove it. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k: Add PCI ID for AR9565Sujith Manoharan
Enable AR9565. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k_hw: Program correct PLL value for AR9565Sujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k_hw: Fix spur mitigation for AR9565Sujith Manoharan
Exclude CCK spur mitigation, freq 2437 for OFDM and add AR9565-specific logic. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k: Set correct max streams for AR9565Sujith Manoharan
Also, set the correct chainmask. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k_hw: Add AR9565 HW supportSujith Manoharan
Various parts of the code require AR9565 checks, this patch adds them. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k_hw: Add AR9565 initvalsSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k_hw: Add version/revision macros for AR9565Sujith Manoharan
And recognize the device in the init path. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11p54: fix off-by-one null pointer bug in p54_tx_80211Christian Lamparter
This patch fixes a regression which was introduced in: "mac80211: move TX station pointer and restructure TX" IP: p54_tx_80211+0x21/0x513 [p54common] Oops: 0000 [#1] SMP Modules linked in: p54usb p54common [...] Pid: 13394, comm: hostapd 3.6.0-rc4-wl+ RIP: 0010:p54_tx_80211+0x21/0x513 RSP: 0018:... EFLAGS: 00010292 [...] Process hostapd Stack: [...] Call Trace: p54_bss_info_changed+0x204/0x21e [p54common] ieee80211_del_station+0x16/0x32 [mac80211] ieee80211_start_ap+0x10f/0x157 [mac80211] nl80211_start_ap+0x315/0x361 [cfg80211] p54_tx_80211 function is called as part of the beacon update. The caller p54_bss_info_changed has to supply a valid tx control struct, or the control->sta will lead to a null pointer dereference. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11drivers/net/wireless/ath/ath9k/ar9003_mac.c: removes unnecessary semicolonPeter Senna Tschudin
removes unnecessary semicolon Found by Coccinelle: http://coccinelle.lip6.fr/ Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k: Add Generic hardware timer interrupt in debugfsMohammed Shafi Shajakhan
Having generic hardware timer interrupt in debugfs would come handy when we are debugging 3 WIRE BTCOEX issues. Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k_hw: Read and configure thermocal for AR9462Rajkumar Manoharan
Read and configure thermometer calibration results read from OTP card. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k_hw: Read and apply thermometer settings from EEPROMRajkumar Manoharan
Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11drivers/net/wireless/rtlwifi/rtl8192de/phy.c: removes unnecessary semicolonPeter Senna Tschudin
removes unnecessary semicolon Found by Coccinelle: http://coccinelle.lip6.fr/ Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11wireless: at76c50x: eliminate hex2str()Andy Shevchenko
The hex2str() is substituted by '%*phD' specificator. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k_htc: Cancel BTCOEX related work before disabling BTCOEXMohammed Shafi Shajakhan
Before disabling BTCOEX in the h/w cancel all BTCOEX related works. This is similar to the commit in ath9k(c32cdbd8) ath9k: Stop the BTCOEX timers before disabling BTCOEX Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k_htc: Add a modparam to enable BTCOEX rather than defaultMohammed Shafi Shajakhan
Enable BTCOEX for WB193(which seems to be the only supported ath9k_htc BTCOEX chipset)only when it is enabled via modparam, rather than enabling it by default. Cc: Vivek Natarajan <nataraja@qualcomm.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k_htc: minor cleanup in ath9k_htc_add_stationMohammed Shafi Shajakhan
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k: Cleanup add/change_interface callbacksMohammed Shafi Shajakhan
*Remove all the checks that will be handled by cfg80211 based on the interface combination advertised. For instance, driver supports at the maximum 8 beaconing interface, while we advertise maximum 8 beaconing interface in the interface combination support. *cfg80211 will take care of not allowing us to add an interface that is not supported by the driver, further if the change_interface changes the old interface to a beaconing interface while we had reached the max limit of 8 beaconing interface, again cfg80211 takes care of this stuff! So remove all these checks. *Beautify placing PS wrappers in the appropriate position. Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k: Remove an obselete function declarationMohammed Shafi Shajakhan
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k: Make use of ath_stop_ani wrapperMohammed Shafi Shajakhan
Additionally it has a neat debug message informing us that we are stopping the ANI algorithm. Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k: Fix BTCOEX timer triggering comparisionMohammed Shafi Shajakhan
Its more correct to convert btcoex_period to 'us' while comparing with btcoex_no_stomp which is in 'us'. Did not find any functionality issues being fixed, as the generic hardware timer triggers are usually refreshed with the newer duty cycle. Cc: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k_hw: Fix invalid MCI GPM index access/cachingMohammed Shafi Shajakhan
There is a possibility that AR_MCI_GPM_1 register can return 0xdeadbeef and this results in caching of invalid GPM index in ar9003_mci_is_gpm_valid. Ensure we have appropriate checks to avoid this. Cc: xijin luo <xijin@qca.qualcomm.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11brcm80211: Remove bogus memcpy in ai_detachAndi Kleen
gcc 4.8 warns for this memcpy. While the copy size is correct, the whole copy seems to be a nop because the destination is never used, and there's no need to use memcpy to copy pointers anyways. And the type of the pointer was wrong, but at least those are always the same. Just remove it. /backup/lsrc/git/linux-lto-2.6/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c: In function 'ai_detach': /backup/lsrc/git/linux-lto-2.6/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c:539:32: warning: argument to 'sizeof' in 'memcpy' call is the same pointer type 'struct si_pub **' as the destination; expected 'struct si_pub *' or an explicit length [-Wsizeof-pointer-memaccess] memcpy(&si_local, &sih, sizeof(struct si_pub **)); ^ Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11zd1211rw: enable support for MFPJussi Kivilinna
zd1211rw lacks hardware encryption, so enabling 802.11w is only matter of enabling IEEE80211_HW_MFP_CAPABLE flag. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11rt2x00: add MediaTek/RaLink Rt3352 WiSoCDaniel Golle
Support for the RT3352 WiSoC was developed for and tested with the ALL5002 devboard running OpenWrt. For now, this supports only devices with internal TXALC. Corrections were made according to the remarks of Stanislaw Gruszka and Gertjan van Wingerde, thank you guys for reviewing! Signed-off-by: Daniel Golle <dgolle@allnet.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11drm/i915: fix up the IBX transcoder B checkDaniel Vetter
This has been added in commit de9a35abb3b343a25065449234e47a76c4f3454a Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Tue Jun 5 11:03:40 2012 +0200 drm/i915: assert that the IBX port transcoder select w/a is implemented Unfortunately I've failed to notice that these checks are not just called for the port that is about to be disabled, but for all (which makes sense for an assert ...), and the WARN missfired when disabling another pipe than the one with the dp port. Hence also check whether the port is actually disabled. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54688 Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-11ALSA: hda_intel: add position_fix quirk for Asus K53ECatalin Iacob
Commit c20c5a841cbe47f5b7812b57bd25397497e5fbc0 changed some chipsets to default to POS_FIX_COMBO so they now use POS_FIX_LPIB instead of POS_FIX_POSBUF. Since then I've been getting artifacts on playback, including repeated sounds on my Asus laptop. My hardware is Cougar Point which the commit log of c20c5a841cbe47f5b7812b57bd25397497e5fbc0 mentions as tested so POS_FIX_COMBO probably works in general but apparently it doesn't on Asus K53E therefore the need for the quirk. Signed-off-by: Catalin Iacob <iacobcatalin@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-11ALSA: compress_core: fix open flags test in snd_compr_open()Dan Carpenter
O_RDONLY is zero so the original test (f->f_flags & O_RDONLY) is always false and it will never do compress capture. The test for O_WRONLY is also slightly off. The original test would consider "->flags = (O_WRONLY | O_RDWR)" as write only instead of rejecting it as invalid. I've also removed the pr_err() because that could flood dmesg. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-11ARM: clk-imx35: Fix SSI clock registrationFabio Estevam
SSI block has two types of clock: ipg: bus clock, the clock needed for accessing registers. per: peripheral clock, the clock needed for generating the bit rate. Currently SSI driver only supports slave mode and only need to handle the ipg clock, because the peripheral clock comes from the master codec. Only register the ipg clock and do not register the peripheral clock for ssi. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Tested-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Cc: stable@vger.kernel.org
2012-09-11ARM: clk-imx25: Fix SSI clock registrationFabio Estevam
SSI block has two types of clock: ipg: bus clock, the clock needed for accessing registers. per: peripheral clock, the clock needed for generating the bit rate. Currently SSI driver only supports slave mode and only need to handle the ipg clock, because the peripheral clock comes from the master codec. Only register the ipg clock and do not register the peripheral clock for ssi. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Cc: stable@vger.kernel.org
2012-09-11net: qmi_wwan: fix Gobi device probing for un2430Pierre Sauter
HP un2430 is a Gobi 3000 device. It was mistakenly treated as Gobi 1000 in patch b9f90eb2740203ff2592efe640409ad48335d1c2. I own this device and qmi_wwan works again with this fix. Signed-off-by: Pierre Sauter <pierre.sauter@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-11crypto: authenc - Fix crash with zero-length assoc dataHerbert Xu
The authenc code doesn't deal with zero-length associated data correctly and ends up constructing a zero-length sg entry which causes a crash when it's fed into the crypto system. This patch fixes this by avoiding the code-path that triggers the SG construction if we have no associated data. This isn't the most optimal fix as it means that we'll end up using the fallback code-path even when we could still execute the digest function. However, this isn't a big deal as nobody but the test path would supply zero-length associated data. Reported-by: Romain Francoise <romain@orebokech.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Tested-by: Romain Francoise <romain@orebokech.com>
2012-09-11kbuild: add symbol prefix arg to kallsymsJames Hogan
Commit 1f2bfbd00e466ff3489b2ca5cc75b1cccd14c123 ("kbuild: link of vmlinux moved to a script") introduced in v3.5-rc1 broke kallsyms on architectures which have symbol prefixes. The --symbol-prefix argument used to be added to the KALLSYMS command line from the architecture Makefile, however this isn't picked up by the new scripts/link-vmlinux.sh. This resulted in symbols like kallsyms_addresses being added which weren't correctly overriding the weak symbols such as _kallsyms_addresses. These could then trigger BUG_ONs in kallsyms code. This is fixed by removing the KALLSYMS addition from the architecture Makefile, and using CONFIG_SYMBOL_PREFIX in the link-vmlinux.sh script to determine whether to add the --symbol-prefix argument. Signed-off-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-09-11Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "I had actually prepared this fix set before I left for KS + Plumbers, so it's been incubating much longer than it should have. I'll be picking up my three week backlog this week, so more fixes will then be forthcoming This set consist of three minor and one fairly major (the device not ready causing offlining problem which is a serious regression introduced by the media change update) fixes. Signed-off-by: James Bottomley <JBottomley@Parallels.com>" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: [SCSI] Fix 'Device not ready' issue on mpt2sas [SCSI] scsi_lib: fix scsi_io_completion's SG_IO error propagation [SCSI] megaraid_sas: Move poll_aen_lock initializer [SCSI] mpt2sas: Fix for Driver oops, when loading driver with max_queue_depth command line option to a very small value
2012-09-11Merge tag 'kvm-3.6-2' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM updates from Avi Kivity: "A trio of KVM fixes: incorrect lookup of guest cpuid, an uninitialized variable fix, and error path cleanup fix." * tag 'kvm-3.6-2' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: fix error paths for failed gfn_to_page() calls KVM: x86: Check INVPCID feature bit in EBX of leaf 7 KVM: PIC: fix use of uninitialised variable.
2012-09-11Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse Pull FUSE fixes from Miklos Szeredi: "This contains bugfixes for FUSE and CUSE and a compile warning fix." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: fix retrieve length fuse: mark variables uninitialized cuse: kill connection on initialization error cuse: fix fuse_conn_kill()
2012-09-10drm/omap: add more new timings fieldsRob Clark
Without these, DVI is broken. Signed-off-by: Rob Clark <rob@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-10drm/omap: update for interlacedRob Clark
'struct omap_video_timings' was updated w/ a 'bool interlaced'. Without a matching update in omap_connector, this field could have undefined values from the stack, which isn't quite ideal. Update the fxns to convert omapdss<->drm timings structs, and zero-init 'struct omap_video_timings' when it is declared on stack to avoid issues like this in the future. Signed-off-by: Rob Clark <rob@ti.com> Reviewed-by: Sumit Semwal <sumit.semwal@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-10EHCI: Update qTD next pointer in QH overlay region during unlinkPavankumar Kondeti
There is a possibility of QH overlay region having reference to a stale qTD pointer during unlink. Consider an endpoint having two pending qTD before unlink process begins. The endpoint's QH queue looks like this. qTD1 --> qTD2 --> Dummy To unlink qTD2, QH is removed from asynchronous list and Asynchronous Advance Doorbell is programmed. The qTD1's next qTD pointer is set to qTD2'2 next qTD pointer and qTD2 is retired upon controller's doorbell interrupt. If QH's current qTD pointer points to qTD1, transfer overlay region still have reference to qTD2. But qtD2 is just unlinked and freed. This may cause EHCI system error. Fix this by updating qTD next pointer in QH overlay region with the qTD next pointer of the current qTD. Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-10staging: r8712u: fix bug in r8712_recv_indicatepkt()Eric Dumazet
64bit arches have a buggy r8712u driver, let's fix it. skb->tail must be set properly or network stack behavior is undefined. Addresses https://bugzilla.redhat.com/show_bug.cgi?id=847525 Addresses https://bugzilla.kernel.org/show_bug.cgi?id=45071 Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Dave Jones <davej@redhat.com> Cc: stable <stable@vger.kernel.org> [2.6.37+] Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-10USB: cdc-wdm: fix wdm_find_device* return valueBjørn Mork
A logic error made the wdm_find_device* functions return a bogus pointer into static data instead of the intended NULL no matching device was found. Cc: stable <stable@vger.kernel.org> # v3.4+ Cc: Oliver Neukum <oliver@neukum.org> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-11Merge branch 'for-linus' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull CIFS fixes from Steve French. * 'for-linus' of git://git.samba.org/sfrench/cifs-2.6: CIFS: Fix endianness conversion CIFS: Fix error handling in cifs_push_mandatory_locks
2012-09-11Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull UDF and ext3 fixes from Jan Kara: "One UDF data corruption fix and one ext3 fix where we didn't write everything to disk on fsync in one corner case." * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: udf: Fix data corruption for files in ICB ext3: Fix fdatasync() for files with only i_size changes
generated by cgit (git 2.34.1) at 2025-09-11 18:48:57 +0000