summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-05-22mmc: sdhci-iproc: suppress spurious interrupt with Multiblock readSrinath Mannam
The stingray SDHCI hardware supports ACMD12 and automatically issues after multi block transfer completed. If ACMD12 in SDHCI is disabled, spurious tx done interrupts are seen on multi block read command with below error message: Got data interrupt 0x00000002 even though no data operation was in progress. This patch uses SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 to enable ACM12 support in SDHCI hardware and suppress spurious interrupt. Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com> Reviewed-by: Ray Jui <ray.jui@broadcom.com> Reviewed-by: Scott Branden <scott.branden@broadcom.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Fixes: b580c52d58d9 ("mmc: sdhci-iproc: add IPROC SDHCI driver") Cc: <stable@vger.kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-05-22bonding: fix accounting of active ports in 3adJarod Wilson
As of 7bb11dc9f59d and 0622cab0341c, bond slaves in a 3ad bond are not removed from the aggregator when they are down, and the active slave count is NOT equal to number of ports in the aggregator, but rather the number of ports in the aggregator that are still enabled. The sysfs spew for bonding_show_ad_num_ports() has a comment that says "Show number of active 802.3ad ports.", but it's currently showing total number of ports, both active and inactive. Remedy it by using the same logic introduced in 0622cab0341c in __bond_3ad_get_active_agg_info(), so sysfs, procfs and netlink all report the number of active ports. Note that this means that IFLA_BOND_AD_INFO_NUM_PORTS really means NUM_ACTIVE_PORTS instead of NUM_PORTS, and thus perhaps should be renamed for clarity. Lightly tested on a dual i40e lacp bond, simulating link downs with an ip link set dev <slave2> down, was able to produce the state where I could see both in the same aggregator, but a number of ports count of 1. MII Status: up Active Aggregator Info: Aggregator ID: 1 Number of ports: 2 <--- Slave Interface: ens10 MII Status: up <--- Aggregator ID: 1 Slave Interface: ens11 MII Status: up Aggregator ID: 1 MII Status: up Active Aggregator Info: Aggregator ID: 1 Number of ports: 1 <--- Slave Interface: ens10 MII Status: down <--- Aggregator ID: 1 Slave Interface: ens11 MII Status: up Aggregator ID: 1 CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: netdev@vger.kernel.org Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-22net: atheros: atl2: don't return zero on failure path in atl2_probe()Alexey Khoroshilov
If dma mask checks fail in atl2_probe(), it breaks off initialization, deallocates all resources, but returns zero. The patch adds proper error code return value and make error code setup unified. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-22mmc: cavium: Fix probing race with regulatorJan Glauber
If the regulator probing is not yet finished this driver might catch a -EPROBE_DEFER. Returning after this condition did not remove the created platform device. On a repeated call to the probe function the of_platform_device_create fails. Calling of_platform_device_destroy after EPROBE_DEFER resolves this bug. Signed-off-by: Jan Glauber <jglauber@cavium.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-05-22of/platform: Make of_platform_device_destroy globally visibleJan Glauber
of_platform_device_destroy is the counterpart to of_platform_device_create which is a non-static function. After creating a platform device it might be neccessary to destroy it to deal with -EPROBE_DEFER where a repeated of_platform_device_create call would fail otherwise. Therefore also make of_platform_device_destroy globally visible. Signed-off-by: Jan Glauber <jglauber@cavium.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-05-22mmc: cavium: Prevent crash with incomplete DTJan Glauber
In case the DT specifies neither a regulator nor a gpio for the shared power the driver will crash accessing the regulator. Prevent the crash by checking the regulator before use. Use mmc_regulator_get_supply() instead of open coding the same logic. Signed-off-by: Jan Glauber <jglauber@cavium.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-05-22ipv6: fix out of bound writes in __ip6_append_data()Eric Dumazet
Andrey Konovalov and idaifish@gmail.com reported crashes caused by one skb shared_info being overwritten from __ip6_append_data() Andrey program lead to following state : copy -4200 datalen 2000 fraglen 2040 maxfraglen 2040 alloclen 2048 transhdrlen 0 offset 0 fraggap 6200 The skb_copy_and_csum_bits(skb_prev, maxfraglen, data + transhdrlen, fraggap, 0); is overwriting skb->head and skb_shared_info Since we apparently detect this rare condition too late, move the code earlier to even avoid allocating skb and risking crashes. Once again, many thanks to Andrey and syzkaller team. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Andrey Konovalov <andreyknvl@google.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> Reported-by: <idaifish@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-22ALSA: hda - Update the list of quirk modelsTakashi Iwai
I've forgotten to sync the documentation with the actually available options for some time. Now all updated. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-05-22ALSA: hda - Provide dual-codecs model option for a few Realtek codecsTakashi Iwai
Recently some laptops and mobos are equipped with the dual Realtek codecs that require special quirks. For making the debugging easier, add the model "dual-codecs" to be passed via module option. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-05-22ALSA: hda - Apply dual-codec quirk for MSI Z270-Gaming moboTakashi Iwai
MSI Z270-Gamin mobo has also two ALC1220 codecs like Gigabyte AZ370- Gaming mobo. Apply the same quirk to this one. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-05-22drm/i915/g33: Improve reset reliabilityMika Kuoppala
We improved the reset reliablity on gen4 with stopping all engines before commencing reset, in commit 2c80353f3cd0 ("drm/i915/g4x: Improve gpu reset reliability") Evidence indicates that this same trick works with g33. v2: proper gen naming, comment readability (Chris) Testcase: igt/gem_busy/*-hang #blb-e6850 Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tomi Sarvela <tomi.p.sarvela@intel.com> Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/20170522090244.2557-1-mika.kuoppala@intel.com
2017-05-22Revert "drm/i915: Restore lost "Initialized i915" welcome message"Daniel Vetter
This reverts commit bc5ca47c0af4f949ba889e666b7da65569e36093. Gabriel put this back into generic code with commit 75f6dfe3e652e1adef8cc1b073c89f3e22103a8f Author: Gabriel Krisman Bertazi <krisman@collabora.co.uk> Date: Wed Dec 28 12:32:11 2016 -0200 drm: Deduplicate driver initialization message but somehow he missed Chris' patch to add the message meanwhile. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101025 Fixes: 75f6dfe3e652 ("drm: Deduplicate driver initialization message") Cc: Gabriel Krisman Bertazi <krisman@collabora.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: <stable@vger.kernel.org> # v4.11+ Reviewed-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170517131557.7836-1-daniel.vetter@ffwll.ch
2017-05-22i2c: designware: Fix bogus sda_hold_time due to uninitialized varsJan Kiszka
We need to initializes those variables to 0 for platforms that do not provide ACPI parameters. Otherwise, we set sda_hold_time to random values, breaking e.g. Galileo and IOT2000 boards. Fixes: 9d6408433019 ("i2c: designware: don't infer timings described by ACPI from clock rate") Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-05-22i2c: i2c-tiny-usb: fix buffer not being DMA capableSebastian Reichel
Since v4.9 i2c-tiny-usb generates the below call trace and longer works, since it can't communicate with the USB device. The reason is, that since v4.9 the USB stack checks, that the buffer it should transfer is DMA capable. This was a requirement since v2.2 days, but it usually worked nevertheless. [ 17.504959] ------------[ cut here ]------------ [ 17.505488] WARNING: CPU: 0 PID: 93 at drivers/usb/core/hcd.c:1587 usb_hcd_map_urb_for_dma+0x37c/0x570 [ 17.506545] transfer buffer not dma capable [ 17.507022] Modules linked in: [ 17.507370] CPU: 0 PID: 93 Comm: i2cdetect Not tainted 4.11.0-rc8+ #10 [ 17.508103] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 [ 17.509039] Call Trace: [ 17.509320] ? dump_stack+0x5c/0x78 [ 17.509714] ? __warn+0xbe/0xe0 [ 17.510073] ? warn_slowpath_fmt+0x5a/0x80 [ 17.510532] ? nommu_map_sg+0xb0/0xb0 [ 17.510949] ? usb_hcd_map_urb_for_dma+0x37c/0x570 [ 17.511482] ? usb_hcd_submit_urb+0x336/0xab0 [ 17.511976] ? wait_for_completion_timeout+0x12f/0x1a0 [ 17.512549] ? wait_for_completion_timeout+0x65/0x1a0 [ 17.513125] ? usb_start_wait_urb+0x65/0x160 [ 17.513604] ? usb_control_msg+0xdc/0x130 [ 17.514061] ? usb_xfer+0xa4/0x2a0 [ 17.514445] ? __i2c_transfer+0x108/0x3c0 [ 17.514899] ? i2c_transfer+0x57/0xb0 [ 17.515310] ? i2c_smbus_xfer_emulated+0x12f/0x590 [ 17.515851] ? _raw_spin_unlock_irqrestore+0x11/0x20 [ 17.516408] ? i2c_smbus_xfer+0x125/0x330 [ 17.516876] ? i2c_smbus_xfer+0x125/0x330 [ 17.517329] ? i2cdev_ioctl_smbus+0x1c1/0x2b0 [ 17.517824] ? i2cdev_ioctl+0x75/0x1c0 [ 17.518248] ? do_vfs_ioctl+0x9f/0x600 [ 17.518671] ? vfs_write+0x144/0x190 [ 17.519078] ? SyS_ioctl+0x74/0x80 [ 17.519463] ? entry_SYSCALL_64_fastpath+0x1e/0xad [ 17.519959] ---[ end trace d047c04982f5ac50 ]--- Cc: <stable@vger.kernel.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Till Harbaum <till@harbaum.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-05-22drm/amd: include <linux/delay.h> instead of "linux/delay.h"Masahiro Yamada
Use <...> notation to include headers located in include/linux. While we are here, tweak the includes order a bit to sort them alphabetically. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1495082612-10385-1-git-send-email-yamada.masahiro@socionext.com
2017-05-22drm: Add DRM_MODE_ROTATE_ and DRM_MODE_REFLECT_ to UAPIRobert Foss
Add DRM_MODE_ROTATE_ and DRM_MODE_REFLECT_ defines to the UAPI as a convenience. Ideally the DRM_ROTATE_ and DRM_REFLECT_ property ids are looked up through the atomic API, but realizing that userspace is likely to take shortcuts and assume that the enum values are what is sent over the wire. As a result these defines are provided purely as a convenience to userspace applications. Changes since v3: - Switched away from past tense in comments - Add define name change to previously mis-spelled DRM_REFLECT_X comment - Improved the comment for the DRM_MODE_REFLECT_<axis> comment Changes since v2: - Changed define prefix from DRM_MODE_PROP_ to DRM_MODE_ - Fix compilation errors - Changed comment formatting - Deduplicated comment lines - Clarified DRM_MODE_PROP_REFLECT_ comment Changes since v1: - Moved defines from drm.h to drm_mode.h - Changed define prefix from DRM_ to DRM_MODE_PROP_ - Updated uses of the defines to the new prefix - Removed include from drm_rect.c - Stopped using the BIT() macro Signed-off-by: Robert Foss <robert.foss@collabora.com> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170519205017.23307-2-robert.foss@collabora.com
2017-05-22drm/vgem: Fix return value check in vgem_init()Wei Yongjun
In case of error, the function platform_device_register_simple() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Fixes: af33a9190d02 ("drm/vgem: Enable dmabuf import interfaces") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Fix fixes: tag per Chris' review.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170521011939.8111-1-weiyj.lk@gmail.com
2017-05-22drm/blend: Fix comment typ-oRobert Foss
Fix DRM_REFELCT_Y -> DRM_REFLECT_Y. Signed-off-by: Robert Foss <robert.foss@collabora.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170519205017.23307-1-robert.foss@collabora.com
2017-05-22drm/stm: remove unneeded -Iinclude/drm compiler flagMasahiro Yamada
With the include directives under include/drm/ fixed, this flag is no longer needed. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1495081793-9707-13-git-send-email-yamada.masahiro@socionext.com
2017-05-22drm/vc4: fix include notation and remove -Iinclude/drm flagMasahiro Yamada
Include <drm/*.h> instead of relative path from include/drm, then remove the -Iinclude/drm compiler flag. While we are here, use <...> instead of "..." for include/linux/*.h and include/sound/*.h headers too. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1495081793-9707-2-git-send-email-yamada.masahiro@socionext.com
2017-05-22drm/i915/huc: Update GLK HuC versionAnusha Srivatsa
Update version of HuC from 01.07.1748 to the version 02.00.1748 Cc: Ander Conselvan <ander.conselvan.de.oliveira@intel.com> Cc: John Spotswood <john.a.spotswood@intel.com> Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1495129631-2930-1-git-send-email-anusha.srivatsa@intel.com
2017-05-22drm/radeon: Fix oops upon driver load on PowerXpress laptopsLukas Wunner
Nicolai Stange reports the following oops which is caused by dereferencing rdev->pdev before it's subsequently set by radeon_device_init(). Fix it. BUG: unable to handle kernel NULL pointer dereference at 00000000000007cb IP: radeon_driver_load_kms+0xeb/0x230 [radeon] ... Call Trace: drm_dev_register+0x146/0x1d0 [drm] drm_get_pci_dev+0x9a/0x180 [drm] radeon_pci_probe+0xb8/0xe0 [radeon] local_pci_probe+0x45/0xa0 pci_device_probe+0x14f/0x1a0 driver_probe_device+0x29c/0x450 __driver_attach+0xdf/0xf0 ? driver_probe_device+0x450/0x450 bus_for_each_dev+0x6c/0xc0 driver_attach+0x1e/0x20 bus_add_driver+0x170/0x270 driver_register+0x60/0xe0 ? 0xffffffffc0508000 __pci_register_driver+0x4c/0x50 drm_pci_init+0xeb/0x100 [drm] ? vga_switcheroo_register_handler+0x6a/0x90 ? 0xffffffffc0508000 radeon_init+0x98/0xb6 [radeon] do_one_initcall+0x52/0x1a0 ? __vunmap+0x81/0xb0 ? kmem_cache_alloc_trace+0x159/0x1b0 ? do_init_module+0x27/0x1f8 do_init_module+0x5f/0x1f8 load_module+0x27ce/0x2be0 SYSC_finit_module+0xdf/0x110 ? SYSC_finit_module+0xdf/0x110 SyS_finit_module+0xe/0x10 do_syscall_64+0x67/0x150 entry_SYSCALL64_slow_path+0x25/0x25 Fixes: 7ffb0ce31cf9 ("drm/radeon: Don't register Thunderbolt eGPU with vga_switcheroo") Reported-and-tested-by: Nicolai Stange <nicstange@gmail.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Link: http://patchwork.freedesktop.org/patch/msgid/cfb91ba052af06117137eec0637543a2626a7979.1495135190.git.lukas@wunner.de
2017-05-21Linux 4.12-rc2v4.12-rc2Linus Torvalds
2017-05-21x86: fix 32-bit case of __get_user_asm_u64()Linus Torvalds
The code to fetch a 64-bit value from user space was entirely buggered, and has been since the code was merged in early 2016 in commit b2f680380ddf ("x86/mm/32: Add support for 64-bit __get_user() on 32-bit kernels"). Happily the buggered routine is almost certainly entirely unused, since the normal way to access user space memory is just with the non-inlined "get_user()", and the inlined version didn't even historically exist. The normal "get_user()" case is handled by external hand-written asm in arch/x86/lib/getuser.S that doesn't have either of these issues. There were two independent bugs in __get_user_asm_u64(): - it still did the STAC/CLAC user space access marking, even though that is now done by the wrapper macros, see commit 11f1a4b9755f ("x86: reorganize SMAP handling in user space accesses"). This didn't result in a semantic error, it just means that the inlined optimized version was hugely less efficient than the allegedly slower standard version, since the CLAC/STAC overhead is quite high on modern Intel CPU's. - the double register %eax/%edx was marked as an output, but the %eax part of it was touched early in the asm, and could thus clobber other inputs to the asm that gcc didn't expect it to touch. In particular, that meant that the generated code could look like this: mov (%eax),%eax mov 0x4(%eax),%edx where the load of %edx obviously was _supposed_ to be from the 32-bit word that followed the source of %eax, but because %eax was overwritten by the first instruction, the source of %edx was basically random garbage. The fixes are trivial: remove the extraneous STAC/CLAC entries, and mark the 64-bit output as early-clobber to let gcc know that no inputs should alias with the output register. Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: stable@kernel.org # v4.8+ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-21Clean up x86 unsafe_get/put_user() type handlingLinus Torvalds
Al noticed that unsafe_put_user() had type problems, and fixed them in commit a7cc722fff0b ("fix unsafe_put_user()"), which made me look more at those functions. It turns out that unsafe_get_user() had a type issue too: it limited the largest size of the type it could handle to "unsigned long". Which is fine with the current users, but doesn't match our existing normal get_user() semantics, which can also handle "u64" even when that does not fit in a long. While at it, also clean up the type cast in unsafe_put_user(). We actually want to just make it an assignment to the expected type of the pointer, because we actually do want warnings from types that don't convert silently. And it makes the code more readable by not having that one very long and complex line. [ This patch might become stable material if we ever end up back-porting any new users of the unsafe uaccess code, but as things stand now this doesn't matter for any current existing uses. ] Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-21acpi, nfit: Fix the memory error check in nfit_handle_mce()Vishal Verma
The check for an MCE being a memory error in the NFIT mce handler was bogus. Use the new mce_is_memory_error() helper to detect the error properly. Reported-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20170519093915.15413-3-bp@alien8.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-05-21x86/MCE: Export memory_error()Borislav Petkov
Export the function which checks whether an MCE is a memory error to other users so that we can reuse the logic. Drop the boot_cpu_data use, while at it, as mce.cpuvendor already has the CPU vendor in there. Integrate a piece from a patch from Vishal Verma <vishal.l.verma@intel.com> to export it for modules (nfit). The main reason we're exporting it is that the nfit handler nfit_handle_mce() needs to detect a memory error properly before doing its recovery actions. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20170519093915.15413-2-bp@alien8.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-05-21Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull misc uaccess fixes from Al Viro: "Fix for unsafe_put_user() (no callers currently in mainline, but anyone starting to use it will step into that) + alpha osf_wait4() infoleak fix" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: osf_wait4(): fix infoleak fix unsafe_put_user()
2017-05-21Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fix from Thomas Gleixner: "A single scheduler fix: Prevent idle task from ever being preempted. That makes sure that synchronize_rcu_tasks() which is ignoring idle task does not pretend that no task is stuck in preempted state. If that happens and idle was preempted on a ftrace trampoline the machine crashes due to inconsistent state" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/core: Call __schedule() from do_idle() without enabling preemption
2017-05-21Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "A set of small fixes for the irq subsystem: - Cure a data ordering problem with chained interrupts - Three small fixlets for the mbigen irq chip" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Fix chained interrupt data ordering irqchip/mbigen: Fix the clear register offset calculation irqchip/mbigen: Fix potential NULL dereferencing irqchip/mbigen: Fix memory mapping code
2017-05-21bridge: start hello_timer when enabling KERNEL_STP in br_stp_startXin Long
Since commit 76b91c32dd86 ("bridge: stp: when using userspace stp stop kernel hello and hold timers"), bridge would not start hello_timer if stp_enabled is not KERNEL_STP when br_dev_open. The problem is even if users set stp_enabled with KERNEL_STP later, the timer will still not be started. It causes that KERNEL_STP can not really work. Users have to re-ifup the bridge to avoid this. This patch is to fix it by starting br->hello_timer when enabling KERNEL_STP in br_stp_start. As an improvement, it's also to start hello_timer again only when br->stp_enabled is KERNEL_STP in br_hello_timer_expired, there is no reason to start the timer again when it's NO_STP. Fixes: 76b91c32dd86 ("bridge: stp: when using userspace stp stop kernel hello and hold timers") Reported-by: Haidong Li <haili@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Reviewed-by: Ivan Vecera <cera@cera.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-21smsc95xx: Support only IPv4 TCP/UDP csum offloadNisar Sayed
When TX checksum offload is used, if the computed checksum is 0 the LAN95xx device do not alter the checksum to 0xffff. In the case of ipv4 UDP checksum, it indicates to receiver that no checksum is calculated. Under ipv6, UDP checksum yields a result of zero must be changed to 0xffff. Hence disabling checksum offload for ipv6 packets. Signed-off-by: Nisar Sayed <Nisar.Sayed@microchip.com> Reported-by: popcorn mix <popcornmix@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-21Merge branch 'arp-always-override-existing-neigh-entries-with-gratuitous-ARP'David S. Miller
Ihar Hrachyshka says: ==================== arp: always override existing neigh entries with gratuitous ARP This patchset is spurred by discussion started at https://patchwork.ozlabs.org/patch/760372/ where we figured that there is no real reason for enforcing override by gratuitous ARP packets only when arp_accept is 1. Same should happen when it's 0 (the default value). changelog v2: handled review comments by Julian Anastasov - fixed a mistake in a comment; - postponed addr_type calculation to as late as possible. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-21arp: always override existing neigh entries with gratuitous ARPIhar Hrachyshka
Currently, when arp_accept is 1, we always override existing neigh entries with incoming gratuitous ARP replies. Otherwise, we override them only if new replies satisfy _locktime_ conditional (packets arrive not earlier than _locktime_ seconds since the last update to the neigh entry). The idea behind locktime is to pick the very first (=> close) reply received in a unicast burst when ARP proxies are used. This helps to avoid ARP thrashing where Linux would switch back and forth from one proxy to another. This logic has nothing to do with gratuitous ARP replies that are generally not aligned in time when multiple IP address carriers send them into network. This patch enforces overriding of existing neigh entries by all incoming gratuitous ARP packets, irrespective of their time of arrival. This will make the kernel honour all incoming gratuitous ARP packets. Signed-off-by: Ihar Hrachyshka <ihrachys@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-21arp: postpone addr_type calculation to as late as possibleIhar Hrachyshka
The addr_type retrieval can be costly, so it's worth trying to avoid its calculation as much as possible. This patch makes it calculated only for gratuitous ARP packets. This is especially important since later we may want to move is_garp calculation outside of arp_accept block, at which point the costly operation will be executed for all setups. The patch is the result of a discussion in net-dev: http://marc.info/?l=linux-netdev&m=149506354216994 Suggested-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Ihar Hrachyshka <ihrachys@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-21arp: decompose is_garp logic into a separate functionIhar Hrachyshka
The code is quite involving already to earn a separate function for itself. If anything, it helps arp_process readability. Signed-off-by: Ihar Hrachyshka <ihrachys@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-21arp: fixed error in a commentIhar Hrachyshka
the is_garp code deals just with gratuitous ARP packets, not every unsolicited packet. This patch is a result of a discussion in netdev: http://marc.info/?l=linux-netdev&m=149506354216994 Suggested-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Ihar Hrachyshka <ihrachys@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-21tcp: initialize rcv_mss to TCP_MIN_MSS instead of 0Wei Wang
When tcp_disconnect() is called, inet_csk_delack_init() sets icsk->icsk_ack.rcv_mss to 0. This could potentially cause tcp_recvmsg() => tcp_cleanup_rbuf() => __tcp_select_window() call path to have division by 0 issue. So this patch initializes rcv_mss to TCP_MIN_MSS instead of 0. Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Wei Wang <weiwan@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-21osf_wait4(): fix infoleakAl Viro
failing sys_wait4() won't fill struct rusage... Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-05-21fix unsafe_put_user()Al Viro
__put_user_size() relies upon its first argument having the same type as what the second one points to; the only other user makes sure of that and unsafe_put_user() should do the same. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-05-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter/IPVS fixes for net The following patchset contains Netfilter/IPVS fixes for your net tree, they are: 1) When using IPVS in direct-routing mode, normal traffic from the LVS host to a back-end server is sometimes incorrectly NATed on the way back into the LVS host. Patch to fix this from Julian Anastasov. 2) Calm down clang compilation warning in ctnetlink due to type mismatch, from Matthias Kaehlcke. 3) Do not re-setup NAT for conntracks that are already confirmed, this is fixing a problem that was introduced in the previous nf-next batch. Patch from Liping Zhang. 4) Do not allow conntrack helper removal from userspace cthelper infrastructure if already in used. This comes with an initial patch to introduce nf_conntrack_helper_put() that is required by this fix. From Liping Zhang. 5) Zero the pad when copying data to userspace, otherwise iptables fails to remove rules. This is a follow up on the patchset that sorts out the internal match/target structure pointer leak to userspace. Patch from the same author, Willem de Bruijn. This also comes with a build failure when CONFIG_COMPAT is not on, coming in the last patch of this series. 6) SYNPROXY crashes with conntrack entries that are created via ctnetlink, more specifically via conntrackd state sync. Patch from Eric Leblond. 7) RCU safe iteration on set element dumping in nf_tables, from Liping Zhang. 8) Missing sanitization of immediate date for the bitwise and cmp expressions in nf_tables. 9) Refcounting logic for chain and objects from set elements does not integrate into the nf_tables 2-phase commit protocol. 10) Missing sanitization of target verdict in ebtables arpreply target, from Gao Feng. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-21x86/boot: Use CROSS_COMPILE prefix for readelfRob Landley
The boot code Makefile contains a straight 'readelf' invocation. This causes build warnings in cross compile environments, when there is no unprefixed readelf accessible via $PATH. Add the missing $(CROSS_COMPILE) prefix. [ tglx: Rewrote changelog ] Fixes: 98f78525371b ("x86/boot: Refuse to build with data relocations") Signed-off-by: Rob Landley <rob@landley.net> Acked-by: Kees Cook <keescook@chromium.org> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Paul Bolle <pebolle@tiscali.nl> Cc: "H.J. Lu" <hjl.tools@gmail.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/ced18878-693a-9576-a024-113ef39a22c0@landley.net Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-05-20Merge tag 'trace-v4.12-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: - Fix a bug caused by not cleaning up the new instance unique triggers when deleting an instance. It also creates a selftest that triggers that bug. - Fix the delayed optimization happening after kprobes boot up self tests being removed by freeing of init memory. - Comment kprobes on why the delay optimization is not a problem for removal of modules, to keep other developers from searching that riddle. - Fix another case of rcu not watching in stack trace tracing. * tag 'trace-v4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Make sure RCU is watching before calling a stack trace kprobes: Document how optimized kprobes are removed from module unload selftests/ftrace: Add test to remove instance with active event triggers selftests/ftrace: Fix bashisms ftrace: Remove #ifdef from code and add clear_ftrace_function_probes() stub ftrace/instances: Clear function triggers when removing instances ftrace: Simplify glob handling in unregister_ftrace_function_probe_func() tracing/kprobes: Enforce kprobes teardown after testing tracing: Move postpone selftests to core from early_initcall
2017-05-20Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "A small collection of fixes that should go into this cycle. - a pull request from Christoph for NVMe, which ended up being manually applied to avoid pulling in newer bits in master. Mostly fibre channel fixes from James, but also a few fixes from Jon and Vijay - a pull request from Konrad, with just a single fix for xen-blkback from Gustavo. - a fuseblk bdi fix from Jan, fixing a regression in this series with the dynamic backing devices. - a blktrace fix from Shaohua, replacing sscanf() with kstrtoull(). - a request leak fix for drbd from Lars, fixing a regression in the last series with the kref changes. This will go to stable as well" * 'for-linus' of git://git.kernel.dk/linux-block: nvmet: release the sq ref on rdma read errors nvmet-fc: remove target cpu scheduling flag nvme-fc: stop queues on error detection nvme-fc: require target or discovery role for fc-nvme targets nvme-fc: correct port role bits nvme: unmap CMB and remove sysfs file in reset path blktrace: fix integer parse fuseblk: Fix warning in super_setup_bdi_name() block: xen-blkback: add null check to avoid null pointer dereference drbd: fix request leak introduced by locking/atomic, kref: Kill kref_sub()
2017-05-20nvmet: release the sq ref on rdma read errorsVijay Immanuel
On rdma read errors, release the sq ref that was taken when the req was initialized. This avoids a hang in nvmet_sq_destroy() when the queue is being freed. Signed-off-by: Vijay Immanuel <vijayi@attalasystems.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-20nvmet-fc: remove target cpu scheduling flagJames Smart
Remove NVMET_FCTGTFEAT_NEEDS_CMD_CPUSCHED. It's unnecessary. Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-20nvme-fc: stop queues on error detectionJames Smart
Per the recommendation by Sagi on: http://lists.infradead.org/pipermail/linux-nvme/2017-April/009261.html Rather than waiting for reset work thread to stop queues and abort the ios, immediately stop the queues on error detection. Reset thread will restop the queues (as it's called on other paths), but it does not appear to have a side effect. Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-20nvme-fc: require target or discovery role for fc-nvme targetsJames Smart
In order to create an association, the remoteport must be serving either a target role or a discovery role. Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-20nvme-fc: correct port role bitsJames Smart
FC Port roles is a bit mask, not individual values. Correct nvme definitions to unique bits. Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-20nvme: unmap CMB and remove sysfs file in reset pathJon Derrick
CMB doesn't get unmapped until removal while getting remapped on every reset. Add the unmapping and sysfs file removal to the reset path in nvme_pci_disable to match the mapping path in nvme_pci_enable. Fixes: 202021c1a ("nvme : Add sysfs entry for NVMe CMBs when appropriate") Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Acked-by: Keith Busch <keith.busch@intel.com> Reviewed-By: Stephen Bates <sbates@raithlin.com> Cc: <stable@vger.kernel.org> # 4.9+ Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
generated by cgit (git 2.34.1) at 2025-09-12 23:05:31 +0000