| Age | Commit message (Collapse) | Author |
|---|
|
[BUG]
Syzbot reported a weird ASSERT() triggered inside prepare_to_merge().
assertion failed: root->reloc_root == reloc_root, in fs/btrfs/relocation.c:1919
------------[ cut here ]------------
kernel BUG at fs/btrfs/relocation.c:1919!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 9904 Comm: syz-executor.3 Not tainted
6.4.0-syzkaller-08881-g533925cb7604 #0
Hardware name: Google Google Compute Engine/Google Compute Engine,
BIOS Google 05/27/2023
RIP: 0010:prepare_to_merge+0xbb2/0xc40 fs/btrfs/relocation.c:1919
Code: fe e9 f5 (...)
RSP: 0018:ffffc9000325f760 EFLAGS: 00010246
RAX: 000000000000004f RBX: ffff888075644030 RCX: 1481ccc522da5800
RDX: ffffc90005c09000 RSI: 00000000000364ca RDI: 00000000000364cb
RBP: ffffc9000325f870 R08: ffffffff816f33ac R09: 1ffff9200064bea0
R10: dffffc0000000000 R11: fffff5200064bea1 R12: ffff888075644000
R13: ffff88803b166000 R14: ffff88803b166560 R15: ffff88803b166558
FS: 00007f4e305fd700(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000056080679c000 CR3: 00000000193ad000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
relocate_block_group+0xa5d/0xcd0 fs/btrfs/relocation.c:3749
btrfs_relocate_block_group+0x7ab/0xd70 fs/btrfs/relocation.c:4087
btrfs_relocate_chunk+0x12c/0x3b0 fs/btrfs/volumes.c:3283
__btrfs_balance+0x1b06/0x2690 fs/btrfs/volumes.c:4018
btrfs_balance+0xbdb/0x1120 fs/btrfs/volumes.c:4402
btrfs_ioctl_balance+0x496/0x7c0 fs/btrfs/ioctl.c:3604
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl+0xf8/0x170 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f4e2f88c389
[CAUSE]
With extra debugging, the offending reloc_root is for quota tree (rootid 8).
Normally we should not use the reloc tree for quota root at all, as reloc
trees are only for subvolume trees.
But there is a race between quota enabling and relocation, this happens
after commit 85724171b302 ("btrfs: fix the btrfs_get_global_root return value").
Before that commit, for quota and free space tree, we exit immediately
if we cannot grab it from fs_info.
But now we would try to read it from disk, just as if they are fs trees,
this sets ROOT_SHAREABLE flags in such race:
Thread A | Thread B
---------------------------------+------------------------------
btrfs_quota_enable() |
| | btrfs_get_root_ref()
| | |- btrfs_get_global_root()
| | | Returned NULL
| | |- btrfs_lookup_fs_root()
| | | Returned NULL
|- btrfs_create_tree() | |
| Now quota root item is | |
| inserted | |- btrfs_read_tree_root()
| | | Got the newly inserted quota root
| | |- btrfs_init_fs_root()
| | | Set ROOT_SHAREABLE flag
[FIX]
Get back to the old behavior by returning PTR_ERR(-ENOENT) if the target
objectid is not a subvolume tree or data reloc tree.
Reported-and-tested-by: syzbot+ae97a827ae1c3336bbb4@syzkaller.appspotmail.com
Fixes: 85724171b302 ("btrfs: fix the btrfs_get_global_root return value")
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When the call to btrfs_reloc_clone_csums in cow_file_range returns an
error, we jump to the out_unlock label with the extent_reserved variable
set to false. The cleanup at the label will then call
extent_clear_unlock_delalloc on the range from start to end. But we've
already added cur_alloc_size to start before the jump, so there might no
range be left from the newly incremented start to end. Move the check for
'start < end' so that it is reached by also for the !extent_reserved case.
CC: stable@vger.kernel.org # 6.1+
Fixes: a315e68f6e8b ("Btrfs: fix invalid attempt to free reserved space on failure to cow range")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
__extent_writepage could have started on more pages than the one it was
called for. This happens regularly for zoned file systems, and in theory
could happen for compressed I/O if the worker thread was executed very
quickly. For such pages extent_write_cache_pages waits for writeback
to complete before moving on to the next page, which is highly inefficient
as it blocks the flusher thread.
Port over the PageDirty check that was added to write_cache_pages in
commit 515f4a037fb ("mm: write_cache_pages optimise page cleaning") to
fix this.
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
extent_write_cache_pages stops writing pages as soon as nr_to_write hits
zero. That is the right thing for opportunistic writeback, but incorrect
for data integrity writeback, which needs to ensure that no dirty pages
are left in the range. Thus only stop the writeback for WB_SYNC_NONE
if nr_to_write hits 0.
This is a port of write_cache_pages changes in commit 05fe478dd04e
("mm: write_cache_pages integrity fix").
Note that I've only trigger the problem with other changes to the btrfs
writeback code, but this condition seems worthwhile fixing anyway.
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
[ updated comment ]
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The PCSpecialist Elimina Pro 16 M laptop model is a Zen laptop which
needs to use the MADT IRQ settings override and which does not have
an INT_SRC_OVR entry for IRQ 1 in its MADT.
So this model needs a DMI quirk to enable the MADT IRQ settings override
to fix its keyboard not working.
Fixes: a9c4a912b7dc ("ACPI: resource: Remove "Zen" specific match and quirks")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217394#c18
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Recently we've been having mysterious hangs while running generic/475 on
the CI system. This turned out to be something like this:
Task 1
dmsetup suspend --nolockfs
-> __dm_suspend
-> dm_wait_for_completion
-> dm_wait_for_bios_completion
-> Unable to complete because of IO's on a plug in Task 2
Task 2
wb_workfn
-> wb_writeback
-> blk_start_plug
-> writeback_sb_inodes
-> Infinite loop unable to make an allocation
Task 3
cache_block_group
->read_extent_buffer_pages
->Waiting for IO to complete that can't be submitted because Task 1
suspended the DM device
The problem here is that we need Task 2 to be scheduled completely for
the blk plug to flush. Normally this would happen, we normally wait for
the block group caching to finish (Task 3), and this schedule would
result in the block plug flushing.
However if there's enough free space available from the current caching
to satisfy the allocation we won't actually wait for the caching to
complete. This check however just checks that we have enough space, not
that we can make the allocation. In this particular case we were trying
to allocate 9MiB, and we had 10MiB of free space, but we didn't have
9MiB of contiguous space to allocate, and thus the allocation failed and
we looped.
We specifically don't cycle through the FFE loop until we stop finding
cached block groups because we don't want to allocate new block groups
just because we're caching, so we short circuit the normal loop once we
hit LOOP_CACHING_WAIT and we found a caching block group.
This is normally fine, except in this particular case where the caching
thread can't make progress because the DM device has been suspended.
Fix this by not only waiting for free space to >= the amount of space we
want to allocate, but also that we make some progress in caching from
the time we start waiting. This will keep us from busy looping when the
caching is taking a while but still theoretically has enough space for
us to allocate from, and fixes this particular case by forcing us to
actually sleep and wait for forward progress, which will flush the plug.
With this fix we're no longer hanging with generic/475.
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
i40e_package_header
One-element and zero-length arrays are deprecated. So, replace
one-element array in struct i40e_package_header with flexible-array
member.
The `+ sizeof(u32)` adjustments ensure that there are no differences
in binary output.
Link: https://github.com/KSPP/linux/issues/335
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Fix a -Wmissing-prototypes warning and add the gather_data_sampling()
stub macro call for real.
Fixes: 0fddfe338210 ("driver core: cpu: Unify redundant silly stubs")
Closes: https://lore.kernel.org/oe-kbuild-all/202308101956.oRj1ls7s-lkp@intel.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/202308101956.oRj1ls7s-lkp@intel.com
|
|
The assertion added to verify the difference in bits set of the
addresses of srso_untrain_ret_alias() and srso_safe_ret_alias() would fail
to link in LLVM's ld.lld linker with the following error:
ld.lld: error: ./arch/x86/kernel/vmlinux.lds:210: at least one side of
the expression must be absolute
ld.lld: error: ./arch/x86/kernel/vmlinux.lds:211: at least one side of
the expression must be absolute
Use ABSOLUTE to evaluate the expression referring to at least one of the
symbols so that LLD can evaluate the linker script.
Also, add linker version info to the comment about XOR being unsupported
in either ld.bfd or ld.lld until somewhat recently.
Fixes: fb3bd914b3ec ("x86/srso: Add a Speculative RAS Overflow mitigation")
Closes: https://lore.kernel.org/llvm/CA+G9fYsdUeNu-gwbs0+T6XHi4hYYk=Y9725-wFhZ7gJMspLDRA@mail.gmail.com/
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reported-by: Daniel Kolesa <daniel@octaforge.org>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Suggested-by: Sven Volkinsfeld <thyrc@gmx.net>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://github.com/ClangBuiltLinux/linux/issues/1907
Link: https://lore.kernel.org/r/20230809-gds-v1-1-eaac90b0cbcc@google.com
|
|
Add a note about the dependency of the User->User mitigation on the
previous Spectre v2 IBPB selection.
Make the layout moar pretty.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230809102700.29449-4-bp@alien8.de
|
|
Make them all a weak function, aliasing to a single function which
issues the "Not affected" string.
No functional changes.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Link: https://lore.kernel.org/r/20230809102700.29449-3-bp@alien8.de
|
|
Most of the index.rst files in Documentation/ refer to other rst files
without their file extension in the name. Do that here too.
No functional changes.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230809102700.29449-2-bp@alien8.de
|
|
The dma-buf backend is supposed to provide its own vm_ops, but some
implementation just have nothing special to do and leave vm_ops
untouched, probably expecting this field to be zero initialized (this
is the case with the system_heap implementation for instance).
Let's reset vma->vm_ops to NULL to keep things working with these
implementations.
Fixes: 26d3ac3cb04d ("drm/shmem-helpers: Redirect mmap for imported dma-buf")
Cc: <stable@vger.kernel.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reported-by: Roman Stratiienko <r.stratiienko@gmail.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Tested-by: Roman Stratiienko <r.stratiienko@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230724112610.60974-1-boris.brezillon@collabora.com
|
|
Ditch it, it has been replace it by the GC transaction API and it has no
clients anymore.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Set on the NFT_SET_ELEM_DEAD_BIT flag on this element, instead of
performing element removal which might race with an ongoing transaction.
Enable gc when dynamic flag is set on since dynset deletion requires
garbage collection after this patch.
Fixes: d0a8d877da97 ("netfilter: nft_dynset: support for element deletion")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Use the GC transaction API to replace the old and buggy gc API and the
busy mark approach.
No set elements are removed from async garbage collection anymore,
instead the _DEAD bit is set on so the set element is not visible from
lookup path anymore. Async GC enqueues transaction work that might be
aborted and retried later.
rbtree and pipapo set backends does not set on the _DEAD bit from the
sync GC path since this runs in control plane path where mutex is held.
In this case, set elements are deactivated, removed and then released
via RCU callback, sync GC never fails.
Fixes: 3c4287f62044 ("nf_tables: Add set type for arbitrary concatenation of ranges")
Fixes: 8d8540c4f5e0 ("netfilter: nft_set_rbtree: add timeout support")
Fixes: 9d0982927e79 ("netfilter: nft_hash: add support for timeouts")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The set types rhashtable and rbtree use a GC worker to reclaim memory.
From system work queue, in periodic intervals, a scan of the table is
done.
The major caveat here is that the nft transaction mutex is not held.
This causes a race between control plane and GC when they attempt to
delete the same element.
We cannot grab the netlink mutex from the work queue, because the
control plane has to wait for the GC work queue in case the set is to be
removed, so we get following deadlock:
cpu 1 cpu2
GC work transaction comes in , lock nft mutex
`acquire nft mutex // BLOCKS
transaction asks to remove the set
set destruction calls cancel_work_sync()
cancel_work_sync will now block forever, because it is waiting for the
mutex the caller already owns.
This patch adds a new API that deals with garbage collection in two
steps:
1) Lockless GC of expired elements sets on the NFT_SET_ELEM_DEAD_BIT
so they are not visible via lookup. Annotate current GC sequence in
the GC transaction. Enqueue GC transaction work as soon as it is
full. If ruleset is updated, then GC transaction is aborted and
retried later.
2) GC work grabs the mutex. If GC sequence has changed then this GC
transaction lost race with control plane, abort it as it contains
stale references to objects and let GC try again later. If the
ruleset is intact, then this GC transaction deactivates and removes
the elements and it uses call_rcu() to destroy elements.
Note that no elements are removed from GC lockless path, the _DEAD bit
is set and pointers are collected. GC catchall does not remove the
elements anymore too. There is a new set->dead flag that is set on to
abort the GC transaction to deal with set->ops->destroy() path which
removes the remaining elements in the set from commit_release, where no
mutex is held.
To deal with GC when mutex is held, which allows safe deactivate and
removal, add sync GC API which releases the set element object via
call_rcu(). This is used by rbtree and pipapo backends which also
perform garbage collection from control plane path.
Since element removal from sets can happen from control plane and
element garbage collection/timeout, it is necessary to keep the set
structure alive until all elements have been deactivated and destroyed.
We cannot do a cancel_work_sync or flush_work in nft_set_destroy because
its called with the transaction mutex held, but the aforementioned async
work queue might be blocked on the very mutex that nft_set_destroy()
callchain is sitting on.
This gives us the choice of ABBA deadlock or UaF.
To avoid both, add set->refs refcount_t member. The GC API can then
increment the set refcount and release it once the elements have been
free'd.
Set backends are adapted to use the GC transaction API in a follow up
patch entitled:
("netfilter: nf_tables: use gc transaction API in set backends")
This is joint work with Florian Westphal.
Fixes: cfed7e1b1f8e ("netfilter: nf_tables: add set garbage collection helpers")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Pull smb server fixes from Steve French:
"Two ksmbd server fixes, both also for stable:
- improve buffer validation when multiple EAs returned
- missing check for command payload size"
* tag '6.5-rc5-ksmbd-server' of git://git.samba.org/ksmbd:
ksmbd: fix wrong next length validation of ea buffer in smb2_set_ea()
ksmbd: validate command request size
|
|
Add a 200ms delay after sending a ctrl report to Quadro,
Octo, D5 Next and Aquaero to give them enough time to
process the request and save the data to memory. Otherwise,
under heavier userspace loads where multiple sysfs entries
are usually set in quick succession, a new ctrl report could
be requested from the device while it's still processing the
previous one and fail with -EPIPE. The delay is only applied
if two ctrl report operations are near each other in time.
Reported by a user on Github [1] and tested by both of us.
[1] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/issues/82
Fixes: 752b927951ea ("hwmon: (aquacomputer_d5next) Add support for Aquacomputer Octo")
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20230807172004.456968-1-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Revert a patch that unconditionally resolved addresses to inlines in
callchains, something that was done before when DWARF mode was asked
for, but could as well be done when just frame pointers (the default)
was selected.
This enriches the callchains with inlines but the way to resolve it
is gross right now, relying on addr2line, and even if we come up with
an efficient way of processing all the associated DWARF info for a
big file as vmlinux is, this has to be something people opt-in, as it
will still result in overheads, so revert it until we get this done
in a saner way.
- Update the x86 msr-index.h header with the kernel original, no change
in tooling output, just addresses a tools/perf build warning.
- Resolve a regression where special "tool events", such as
"duration_time" were being presented for all CPUs, when it only
makes sense to show it for the workload, that is, just once.
* tag 'perf-tools-fixes-for-v6.5-3-2023-08-09' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf stat: Don't display zero tool counts
tools arch x86: Sync the msr-index.h copy with the kernel sources
Revert "perf report: Append inlines to non-DWARF callchains"
|
|
Commit 16d7fd3cfa72 ("zonefs: use iomap for synchronous direct writes")
changes zonefs code from a self-built zone append BIO to using iomap for
synchronous direct writes. This change relies on iomap submit BIO
callback to change the write BIO built by iomap to a zone append BIO.
However, this change overlooked the fact that a write BIO may be very
large as it is split when issued. The change from a regular write to a
zone append operation for the built BIO can result in a block layer
warning as zone append BIO are not allowed to be split.
WARNING: CPU: 18 PID: 202210 at block/bio.c:1644 bio_split+0x288/0x350
Call Trace:
? __warn+0xc9/0x2b0
? bio_split+0x288/0x350
? report_bug+0x2e6/0x390
? handle_bug+0x41/0x80
? exc_invalid_op+0x13/0x40
? asm_exc_invalid_op+0x16/0x20
? bio_split+0x288/0x350
bio_split_rw+0x4bc/0x810
? __pfx_bio_split_rw+0x10/0x10
? lockdep_unlock+0xf2/0x250
__bio_split_to_limits+0x1d8/0x900
blk_mq_submit_bio+0x1cf/0x18a0
? __pfx_iov_iter_extract_pages+0x10/0x10
? __pfx_blk_mq_submit_bio+0x10/0x10
? find_held_lock+0x2d/0x110
? lock_release+0x362/0x620
? mark_held_locks+0x9e/0xe0
__submit_bio+0x1ea/0x290
? __pfx___submit_bio+0x10/0x10
? seqcount_lockdep_reader_access.constprop.0+0x82/0x90
submit_bio_noacct_nocheck+0x675/0xa20
? __pfx_bio_iov_iter_get_pages+0x10/0x10
? __pfx_submit_bio_noacct_nocheck+0x10/0x10
iomap_dio_bio_iter+0x624/0x1280
__iomap_dio_rw+0xa22/0x18a0
? lock_is_held_type+0xe3/0x140
? __pfx___iomap_dio_rw+0x10/0x10
? lock_release+0x362/0x620
? zonefs_file_write_iter+0x74c/0xc80 [zonefs]
? down_write+0x13d/0x1e0
iomap_dio_rw+0xe/0x40
zonefs_file_write_iter+0x5ea/0xc80 [zonefs]
do_iter_readv_writev+0x18b/0x2c0
? __pfx_do_iter_readv_writev+0x10/0x10
? inode_security+0x54/0xf0
do_iter_write+0x13b/0x7c0
? lock_is_held_type+0xe3/0x140
vfs_writev+0x185/0x550
? __pfx_vfs_writev+0x10/0x10
? __handle_mm_fault+0x9bd/0x1c90
? find_held_lock+0x2d/0x110
? lock_release+0x362/0x620
? find_held_lock+0x2d/0x110
? lock_release+0x362/0x620
? __up_read+0x1ea/0x720
? do_pwritev+0x136/0x1f0
do_pwritev+0x136/0x1f0
? __pfx_do_pwritev+0x10/0x10
? syscall_enter_from_user_mode+0x22/0x90
? lockdep_hardirqs_on+0x7d/0x100
do_syscall_64+0x58/0x80
This error depends on the hardware used, specifically on the max zone
append bytes and max_[hw_]sectors limits. Tests using AMD Epyc machines
that have low limits did not reveal this issue while runs on Intel Xeon
machines with larger limits trigger it.
Manually splitting the zone append BIO using bio_split_rw() can solve
this issue but also requires issuing the fragment BIOs synchronously
with submit_bio_wait(), to avoid potential reordering of the zone append
BIO fragments, which would lead to data corruption. That is, this
solution is not better than using regular write BIOs which are subject
to serialization using zone write locking at the IO scheduler level.
Given this, fix the issue by removing zone append support and using
regular write BIOs for synchronous direct writes. This allows preseving
the use of iomap and having identical synchronous and asynchronous
sequential file write path. Zone append support will be reintroduced
later through io_uring commands to ensure that the needed special
handling is done correctly.
Reported-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Fixes: 16d7fd3cfa72 ("zonefs: use iomap for synchronous direct writes")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Xu Kuohai says:
====================
bug fixes and a new test case for sockmap.
v3:
fix bpf ci failure
v2: https://lore.kernel.org/bpf/20230803064838.108784-1-xukuohai@huaweicloud.com
add a test case
v1:
https://lore.kernel.org/bpf/20230728105649.3978774-1-xukuohai@huaweicloud.com
https://lore.kernel.org/bpf/20230728105717.3978849-1-xukuohai@huaweicloud.com
====================
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Add a test case to check whether sockmap redirection works correctly
when data length returned by stream_parser is less than skb->len.
In addition, this test checks whether strp_done is called correctly.
The reason is that we returns skb->len - 1 from the stream_parser, so
the last byte in the skb will be held by strp->skb_head. Therefore,
if strp_done is not called to free strp->skb_head, we'll get a memleak
warning.
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Link: https://lore.kernel.org/r/20230804073740.194770-5-xukuohai@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
BPF CI has reported the following failure:
Error: #200/79 sockmap_listen/sockmap VSOCK test_vsock_redir
Error: #200/79 sockmap_listen/sockmap VSOCK test_vsock_redir
./test_progs:vsock_unix_redir_connectible:1506: egress: write: Transport endpoint is not connected
vsock_unix_redir_connectible:FAIL:1506
./test_progs:vsock_unix_redir_connectible:1506: ingress: write: Transport endpoint is not connected
vsock_unix_redir_connectible:FAIL:1506
./test_progs:vsock_unix_redir_connectible:1506: egress: write: Transport endpoint is not connected
vsock_unix_redir_connectible:FAIL:1506
./test_progs:vsock_unix_redir_connectible:1514: ingress: recv() err, errno=11
vsock_unix_redir_connectible:FAIL:1514
./test_progs:vsock_unix_redir_connectible:1518: ingress: vsock socket map failed, a != b
vsock_unix_redir_connectible:FAIL:1518
./test_progs:vsock_unix_redir_connectible:1525: ingress: want pass count 1, have 0
It’s because the recv(... MSG_DONTWAIT) syscall in the test case is
called before the queued work sk_psock_backlog() in the kernel finishes
executing. So the data to be read is still queued in psock->ingress_skb
and cannot be read by the user program. Therefore, the non-blocking
recv() reads nothing and reports an EAGAIN error.
So replace recv(... MSG_DONTWAIT) with xrecv_nonblock(), which calls
select() to wait for data to be readable or timeout before calls recv().
Fixes: d61bd8c1fd02 ("selftests/bpf: add a test case for vsock sockmap")
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Link: https://lore.kernel.org/r/20230804073740.194770-4-xukuohai@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
strp_done is only called when psock->progs.stream_parser is not NULL,
but stream_parser was set to NULL by sk_psock_stop_strp(), called
by sk_psock_drop() earlier. So, strp_done can never be called.
Introduce SK_PSOCK_RX_ENABLED to mark whether there is strp on psock.
Change the condition for calling strp_done from judging whether
stream_parser is set to judging whether this flag is set. This flag is
only set once when strp_init() succeeds, and will never be cleared later.
Fixes: c0d95d3380ee ("bpf, sockmap: Re-evaluate proto ops when psock is removed from sockmap")
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20230804073740.194770-3-xukuohai@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
sock_map_del_link() operates on both SOCKMAP and SOCKHASH, although
both types have member named "progs", the offset of "progs" member in
these two types is different, so "progs" should be accessed with the
real map type.
Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20230804073740.194770-2-xukuohai@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Fix a refcount underflow problem reported by syzbot that can happen
when a system is running out of memory. If xp_alloc_tx_descs() fails,
and it can only fail due to not having enough memory, then the error
path is triggered. In this error path, the refcount of the pool is
decremented as it has incremented before. However, the reference to
the pool in the socket was not nulled. This means that when the socket
is closed later, the socket teardown logic will think that there is a
pool attached to the socket and try to decrease the refcount again,
leading to a refcount underflow.
I chose this fix as it involved adding just a single line. Another
option would have been to move xp_get_pool() and the assignment of
xs->pool to after the if-statement and using xs_umem->pool instead of
xs->pool in the whole if-statement resulting in somewhat simpler code,
but this would have led to much more churn in the code base perhaps
making it harder to backport.
Fixes: ba3beec2ec1d ("xsk: Fix possible crash when multiple sockets are created")
Reported-by: syzbot+8ada0057e69293a05fd4@syzkaller.appspotmail.com
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230809142843.13944-1-magnus.karlsson@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Vladimir Oltean says:
====================
Improve the taprio qdisc's relationship with its children
v1: https://lore.kernel.org/lkml/20230531173928.1942027-1-vladimir.oltean@nxp.com/
Prompted by Vinicius' request to consolidate some child Qdisc
dereferences in taprio:
https://lore.kernel.org/netdev/87edmxv7x2.fsf@intel.com/
I remembered that I had left some unfinished work in this Qdisc, namely
commit af7b29b1deaa ("Revert "net/sched: taprio: make qdisc_leaf() see
the per-netdev-queue pfifo child qdiscs"").
This patch set represents another stab at, essentially, what's in the
title. Not only does taprio not properly detect when it's grafted as a
non-root qdisc, but it also returns incorrect per-class stats.
Eventually, Vinicius' request is addressed too, although in a different
form than the one he requested (which was purely cosmetic).
Review from people more experienced with Qdiscs than me would be
appreciated. I tried my best to explain what I consider to be problems.
I am deliberately targeting net-next because the changes are too
invasive for net - they were reverted from stable once already.
====================
Link: https://lore.kernel.org/r/20230807193324.4128292-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The reason behind commit af7b29b1deaa ("Revert "net/sched: taprio: make
qdisc_leaf() see the per-netdev-queue pfifo child qdiscs"") was that the
patch it reverted caused a crash when attaching a CBS shaper to one of
the taprio classes. Prevent that from happening again by adding a test
case for it, which now passes correctly in both offload and software
modes.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Link: https://lore.kernel.org/r/20230807193324.4128292-12-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Check that the "Can only be attached as root qdisc" error message from
taprio is effective by attempting to attach it to a class of another
taprio qdisc. That operation should fail.
In the bug that was squashed by change "net/sched: taprio: try again to
report q->qdiscs[] to qdisc_leaf()", grafting a child taprio to a root
software taprio would be misinterpreted as a change() to the root
taprio. Catch this by looking at whether the base-time of the root
taprio has changed to follow the base-time of the child taprio,
something which should have absolutely never happened assuming correct
semantics.
Vinicius points out that looking at "base_time" in the tc qdisc show
output is unreliable because user space is in a race with the kernel
applying the setting. So we create a helper bash script which waits
while there is any pending schedule.
Link: https://lore.kernel.org/netdev/87il9w0xx7.fsf@intel.com/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Link: https://lore.kernel.org/r/20230807193324.4128292-11-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For offloaded tc-taprio testing with netdevsim, the mock-up PHC driver
is used.
Suggested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230807193324.4128292-10-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To be able to use netdevsim for tc-testing with an offloaded tc-taprio
schedule, it needs to report a PTP clock (which it now does), and to
accept ndo_setup_tc(TC_SETUP_QDISC_TAPRIO) calls.
Since netdevsim has no packet I/O, this doesn't do anything intelligent,
it only allows taprio offload code paths to go through some level of
automated testing.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230807193324.4128292-9-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
I'd like to make netdevsim offload tc-taprio, but currently, this Qdisc
emits a ETHTOOL_GET_TS_INFO call to the driver to make sure that it has
a PTP clock, so that it is reasonably capable of offloading the schedule.
By using the mock PHC driver, that becomes possible.
Hardware timestamping is not necessary, and netdevsim does not support
packet I/O anyway.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230807193324.4128292-8-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are several cases where virtual net devices may benefit from
having a PTP clock, and these have to do with testing. I can see at
least netdevsim and veth as potential users of a common mock-up PTP
hardware clock driver.
The proposed idea is to create an object which emulates PTP clock
operations on top of the unadjustable CLOCK_MONOTONIC_RAW plus a
software-controlled time domain via a timecounter/cyclecounter and then
link that PHC to the netdevsim device.
The driver is fully functional for its intended purpose, and it
successfully passes the PTP selftests.
$ cd tools/testing/selftests/ptp/
$ ./phc.sh /dev/ptp2
TEST: settime [ OK ]
TEST: adjtime [ OK ]
TEST: adjfreq [ OK ]
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230807193324.4128292-7-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This makes a difference for the software scheduling mode, where
dev_queue->qdisc_sleeping is the same as the taprio root Qdisc itself,
but when we're talking about what Qdisc and stats get reported for a
traffic class, the root taprio isn't what comes to mind, but q->qdiscs[]
is.
To understand the difference, I've attempted to send 100 packets in
software mode through class 8001:5, and recorded the stats before and
after the change.
Here is before:
$ tc -s class show dev eth0
class taprio 8001:1 root leaf 8001:
Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:2 root leaf 8001:
Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:3 root leaf 8001:
Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:4 root leaf 8001:
Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:5 root leaf 8001:
Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:6 root leaf 8001:
Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:7 root leaf 8001:
Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:8 root leaf 8001:
Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
and here is after:
class taprio 8001:1 root
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:2 root
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:3 root
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:4 root
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:5 root
Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:6 root
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:7 root
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
class taprio 8001:8 root leaf 800d:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
window_drops 0
The most glaring (and expected) difference is that before, all class
stats reported the global stats, whereas now, they really report just
the counters for that traffic class.
Finally, Pedro Tammela points out that there is a tc selftest which
checks specifically which handle do the child Qdiscs corresponding to
each class have. That's changing here - taprio no longer reports
tcm->tcm_info as the same handle "1:" as itself (the root Qdisc), but 0
(the handle of the default pfifo child Qdiscs). Since iproute2 does not
print a child Qdisc handle of 0, adjust the test's expected output.
Link: https://lore.kernel.org/netdev/3b83fcf6-a5e8-26fb-8c8a-ec34ec4c3342@mojatatu.com/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230807193324.4128292-6-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As mentioned in commit af7b29b1deaa ("Revert "net/sched: taprio: make
qdisc_leaf() see the per-netdev-queue pfifo child qdiscs"") - unlike
mqprio, taprio doesn't use q->qdiscs[] only as a temporary transport
between Qdisc_ops :: init() and Qdisc_ops :: attach().
Delete the comment, which is just stolen from mqprio, but there, the
usage patterns are a lot different, and this is nothing but confusing.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230807193324.4128292-5-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This is another stab at commit 1461d212ab27 ("net/sched: taprio: make
qdisc_leaf() see the per-netdev-queue pfifo child qdiscs"), later
reverted in commit af7b29b1deaa ("Revert "net/sched: taprio: make
qdisc_leaf() see the per-netdev-queue pfifo child qdiscs"").
I believe that the problems that caused the revert were fixed, and thus,
this change is identical to the original patch.
Its purpose is to properly reject attaching a software taprio child
qdisc to a software taprio parent. Because unoffloaded taprio currently
reports itself (the root Qdisc) as the return value from qdisc_leaf(),
then the process of attaching another taprio as child to a Qdisc class
of the root will just result in a Qdisc_ops :: change() call for the
root. Whereas that's not we want. We want Qdisc_ops :: init() to be
called for the taprio child, in order to give the taprio child a chance
to check whether its sch->parent is TC_H_ROOT or not (and reject this
configuration).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230807193324.4128292-4-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Normally, Qdiscs have one reference on them held by their owner and one
held for each TXQ to which they are attached, however this is not the
case with the children of an offloaded taprio. Instead, the taprio qdisc
currently lives in the following fragile equilibrium.
In the software scheduling case, taprio attaches itself (the root Qdisc)
to all TXQs, thus having a refcount of 1 + the number of TX queues. In
this mode, the q->qdiscs[] children are not visible directly to the
Qdisc API. The lifetime of the Qdiscs from this private array lasts
until qdisc_destroy() -> taprio_destroy().
In the fully offloaded case, the root taprio has a refcount of 1, and
all child q->qdiscs[] also have a refcount of 1. The child q->qdiscs[]
are attached to the netdev TXQs directly and thus are visible to the
Qdisc API, however taprio loses a reference to them very early - during
qdisc_graft(parent==NULL) -> taprio_attach(). At that time, taprio frees
the q->qdiscs[] array to not leak memory, but interestingly, it does not
release a reference on these qdiscs because it doesn't effectively own
them - they are created by taprio but owned by the Qdisc core, and will
be freed by qdisc_graft(parent==NULL, new==NULL) -> qdisc_put(old) when
the Qdisc is deleted or when the child Qdisc is replaced with something
else.
My interest is to change this equilibrium such that taprio also owns a
reference on the q->qdiscs[] child Qdiscs for the lifetime of the root
Qdisc, including in full offload mode. I want this because I would like
taprio_leaf(), taprio_dump_class(), taprio_dump_class_stats() to have
insight into q->qdiscs[] for the software scheduling mode - currently
they look at dev_queue->qdisc_sleeping, which is, as mentioned, the same
as the root taprio.
The following set of changes is necessary:
- don't free q->qdiscs[] early in taprio_attach(), free it late in
taprio_destroy() for consistency with software mode. But:
- currently that's not possible, because taprio doesn't own a reference
on q->qdiscs[]. So hold that reference - once during the initial
attach() and once during subsequent graft() calls when the child is
changed.
- always keep track of the current child in q->qdiscs[], even for full
offload mode, so that we free in taprio_destroy() what we should, and
not something stale.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230807193324.4128292-3-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This is a simple code transformation with no intended behavior change,
just to make it absolutely clear that q->qdiscs[] is only attached to
the child taprio classes in full offload mode.
Right now we use the q->qdiscs[] variable in taprio_attach() for
software mode too, but that is quite confusing and avoidable. We use
it only to reach the netdev TX queue, but we could as well just use
netdev_get_tx_queue() for that.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230807193324.4128292-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Saeed Mahameed says:
====================
mlx5: Expose NIC temperature via hwmon API
Expose NIC temperature by implementing hwmon kernel API, which turns
current thermal zone kernel API to redundant.
For each one of the supported and exposed thermal diode sensors, expose
the following attributes:
1) Input temperature.
2) Highest temperature.
3) Temperature label.
4) Temperature critical max value:
refers to the high threshold of Warning Event. Will be exposed as
`tempY_crit` hwmon attribute (RO attribute). For example for
ConnectX5 HCA's this temperature value will be 105 Celsius, 10
degrees lower than the HW shutdown temperature).
5) Temperature reset history: resets highest temperature.
====================
Link: https://lore.kernel.org/r/20230807180507.22984-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Expose NIC temperature by implementing hwmon kernel API, which turns
current thermal zone kernel API to redundant.
For each one of the supported and exposed thermal diode sensors, expose
the following attributes:
1) Input temperature.
2) Highest temperature.
3) Temperature label:
Depends on the firmware capability, if firmware doesn't support
sensors naming, the fallback naming convention would be: "sensorX",
where X is the HW spec (MTMP register) sensor index.
4) Temperature critical max value:
refers to the high threshold of Warning Event. Will be exposed as
`tempY_crit` hwmon attribute (RO attribute). For example for
ConnectX5 HCA's this temperature value will be 105 Celsius, 10
degrees lower than the HW shutdown temperature).
5) Temperature reset history: resets highest temperature.
For example, for dualport ConnectX5 NIC with a single IC thermal diode
sensor will have 2 hwmon directories (one for each PCI function)
under "/sys/class/hwmon/hwmon[X,Y]".
Listing one of the directories above (hwmonX/Y) generates the
corresponding output below:
$ grep -H -d skip . /sys/class/hwmon/hwmon0/*
Output
=======================================================================
/sys/class/hwmon/hwmon0/name:mlx5
/sys/class/hwmon/hwmon0/temp1_crit:105000
/sys/class/hwmon/hwmon0/temp1_highest:48000
/sys/class/hwmon/hwmon0/temp1_input:46000
/sys/class/hwmon/hwmon0/temp1_label:asic
grep: /sys/class/hwmon/hwmon0/temp1_reset_history: Permission denied
In addition, displaying the sensors data via lm_sensors generates the
corresponding output below:
$ sensors
Output
=======================================================================
mlx5-pci-0800
Adapter: PCI adapter
asic: +46.0°C (crit = +105.0°C, highest = +48.0°C)
mlx5-pci-0801
Adapter: PCI adapter
asic: +46.0°C (crit = +105.0°C, highest = +48.0°C)
CC: Jean Delvare <jdelvare@suse.com>
Signed-off-by: Adham Faris <afaris@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230807180507.22984-3-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make mlx5_query_module_num() defined in port.c, a non-static, so it can
be used by other files.
CC: Jean Delvare <jdelvare@suse.com>
CC: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Adham Faris <afaris@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230807180507.22984-2-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The upcoming (and nearly finalized):
https://datatracker.ietf.org/doc/draft-collink-6man-pio-pflag/
will update the IPv6 RA to include a new flag in the PIO field,
which will serve as a hint to perform DHCPv6-PD.
As we don't want DHCPv6 related logic inside the kernel, this piece of
information needs to be exposed to userspace. The simplest option is to
simply expose the entire PIO through the already existing mechanism.
Even without this new flag, the already existing PIO R (router address)
flag (from RFC6275) cannot AFAICT be handled entirely in kernel,
and provides useful information that should be exposed to userspace
(the router's global address, for use by Mobile IPv6).
Also cc'ing stable@ for inclusion in LTS, as while technically this is
not quite a bugfix, and instead more of a feature, it is absolutely
trivial and the alternative is manually cherrypicking into all Android
Common Kernel trees - and I know Greg will ask for it to be sent in via
LTS instead...
Cc: Jen Linkova <furry@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: YOSHIFUJI Hideaki / 吉藤英明 <yoshfuji@linux-ipv6.org>
Cc: stable@vger.kernel.org
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Link: https://lore.kernel.org/r/20230807102533.1147559-1-maze@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
I'm looking to enable -Wmissing-variable-declarations behind W=1. 0day
bot spotted the following instances:
net/llc/llc_conn.c:44:5: warning: no previous extern declaration for
non-static variable 'sysctl_llc2_ack_timeout'
[-Wmissing-variable-declarations]
44 | int sysctl_llc2_ack_timeout = LLC2_ACK_TIME * HZ;
| ^
net/llc/llc_conn.c:44:1: note: declare 'static' if the variable is not
intended to be used outside of this translation unit
44 | int sysctl_llc2_ack_timeout = LLC2_ACK_TIME * HZ;
| ^
net/llc/llc_conn.c:45:5: warning: no previous extern declaration for
non-static variable 'sysctl_llc2_p_timeout'
[-Wmissing-variable-declarations]
45 | int sysctl_llc2_p_timeout = LLC2_P_TIME * HZ;
| ^
net/llc/llc_conn.c:45:1: note: declare 'static' if the variable is not
intended to be used outside of this translation unit
45 | int sysctl_llc2_p_timeout = LLC2_P_TIME * HZ;
| ^
net/llc/llc_conn.c:46:5: warning: no previous extern declaration for
non-static variable 'sysctl_llc2_rej_timeout'
[-Wmissing-variable-declarations]
46 | int sysctl_llc2_rej_timeout = LLC2_REJ_TIME * HZ;
| ^
net/llc/llc_conn.c:46:1: note: declare 'static' if the variable is not
intended to be used outside of this translation unit
46 | int sysctl_llc2_rej_timeout = LLC2_REJ_TIME * HZ;
| ^
net/llc/llc_conn.c:47:5: warning: no previous extern declaration for
non-static variable 'sysctl_llc2_busy_timeout'
[-Wmissing-variable-declarations]
47 | int sysctl_llc2_busy_timeout = LLC2_BUSY_TIME * HZ;
| ^
net/llc/llc_conn.c:47:1: note: declare 'static' if the variable is not
intended to be used outside of this translation unit
47 | int sysctl_llc2_busy_timeout = LLC2_BUSY_TIME * HZ;
| ^
These symbols are referenced by more than one translation unit, so make
include the correct header for their declarations. Finally, sort the
list of includes to help keep them tidy.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/llvm/202308081000.tTL1ElTr-lkp@intel.com/
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230808-llc_static-v1-1-c140c4c297e4@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
IPV6_ADDRFORM socket option is evil, because it can change sock->ops
while other threads might read it. Same issue for sk->sk_family
being set to AF_INET.
Adding READ_ONCE() over sock->ops reads is needed for sockets
that might be impacted by IPV6_ADDRFORM.
Note that mptcp_is_tcpsk() can also overwrite sock->ops.
Adding annotations for all sk->sk_family reads will require
more patches :/
BUG: KCSAN: data-race in ____sys_sendmsg / do_ipv6_setsockopt
write to 0xffff888109f24ca0 of 8 bytes by task 4470 on cpu 0:
do_ipv6_setsockopt+0x2c5e/0x2ce0 net/ipv6/ipv6_sockglue.c:491
ipv6_setsockopt+0x57/0x130 net/ipv6/ipv6_sockglue.c:1012
udpv6_setsockopt+0x95/0xa0 net/ipv6/udp.c:1690
sock_common_setsockopt+0x61/0x70 net/core/sock.c:3663
__sys_setsockopt+0x1c3/0x230 net/socket.c:2273
__do_sys_setsockopt net/socket.c:2284 [inline]
__se_sys_setsockopt net/socket.c:2281 [inline]
__x64_sys_setsockopt+0x66/0x80 net/socket.c:2281
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
read to 0xffff888109f24ca0 of 8 bytes by task 4469 on cpu 1:
sock_sendmsg_nosec net/socket.c:724 [inline]
sock_sendmsg net/socket.c:747 [inline]
____sys_sendmsg+0x349/0x4c0 net/socket.c:2503
___sys_sendmsg net/socket.c:2557 [inline]
__sys_sendmmsg+0x263/0x500 net/socket.c:2643
__do_sys_sendmmsg net/socket.c:2672 [inline]
__se_sys_sendmmsg net/socket.c:2669 [inline]
__x64_sys_sendmmsg+0x57/0x60 net/socket.c:2669
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
value changed: 0xffffffff850e32b8 -> 0xffffffff850da890
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 4469 Comm: syz-executor.1 Not tainted 6.4.0-rc5-syzkaller-00313-g4c605260bc60 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/25/2023
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230808135809.2300241-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Li Zetao says:
====================
Remove redundant functions and use generic functions
This patch set removes some redundant functions. In the network module,
two generic functions are provided to convert u64 value and Ethernet
MAC address. Using generic functions helps reduce redundant code and
improve code readability.
====================
Link: https://lore.kernel.org/r/20230808114504.4036008-1-lizetao1@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The rvu_npc_exact_mac2u64() is used to convert an Ethernet MAC address
into a u64 value, as this is exactly what ether_addr_to_u64() does.
Use ether_addr_to_u64() to replace the rvu_npc_exact_mac2u64().
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Acked-by: Geethasowjanya Akula <gakula@marvell.com>
Link: https://lore.kernel.org/r/20230808114504.4036008-4-lizetao1@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use u64_to_ether_addr() to convert a u64 value to an Ethernet MAC address,
instead of directly calculating, as this is exactly what this
function does.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Acked-by: Geethasowjanya Akula <gakula@marvell.com>
Link: https://lore.kernel.org/r/20230808114504.4036008-3-lizetao1@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The mac2u64() is used to convert an Ethernet MAC address into a u64 value,
as this is exactly what ether_addr_to_u64() does. Similarly, the cfg2mac()
is also the case. Use ether_addr_to_u64() and u64_to_ether_addr() instead
of these two.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Acked-by: Geethasowjanya Akula <gakula@marvell.com>
Link: https://lore.kernel.org/r/20230808114504.4036008-2-lizetao1@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Petr Machata says:
====================
mlxsw: Set port STP state on bridge enslavement
When the first port joins a LAG that already has a bridge upper, an
instance of struct mlxsw_sp_bridge_port is created for the LAG to keep
track of it as a bridge port. The bridge_port's STP state is initialized to
BR_STATE_DISABLED. This made sense previously, because mlxsw would only
ever allow a port to join a LAG if the LAG had no uppers. Thus if a
bridge_port was instantiated, it must have been because the LAG as such is
joining a bridge, and the STP state is correspondingly disabled.
However as of commit 2c5ffe8d7226 ("mlxsw: spectrum: Permit enslavement to
netdevices with uppers"), mlxsw allows a port to join a LAG that is already
a member of a bridge. The STP state may be different than disabled in that
case. Initialize it properly by querying the actual state.
This bug may cause an issue as traffic on ports attached to a bridged LAG
gets dropped on ingress with discard_ingress_general counter bumped.
The above fix in patch #1. Patch #2 contains a selftest that would
sporadically reproduce the issue.
====================
Link: https://lore.kernel.org/r/cover.1691498735.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
