| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
OSD has a configurable limitation of max write size. OSD return
error if write request size is larger than the limitation. For now,
set max write size to CEPH_MSG_MAX_DATA_LEN. It should be small
enough.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
libceph returns -EIO when read size > CEPH_MSG_MAX_DATA_LEN.
Link: http://tracker.ceph.com/issues/20528
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Ville Syrjälä spotted that PGETBL_CTL was losing its enable bit upon a
reset. That was causing the display to show garbage on his 945gm. On my
i915gm the effect was far more severe; re-enabling the display following
the reset without PGETBL_CTL being enabled lead to an immediate hard
hang.
We do have a routine to re-enable PGETBL_CTL which is applicable to
gen2-4, although on gen4 it is documented that a graphics reset doesn't
alter the register (no such wording is given for gen3) and should be safe
to call to punch back in the enable bit. However, that leaves the question
of whether we need to completely re-initialise the register and the
rest of the GSM. For g33/pnv/gen4+, where we do have a configurable
page table, its contents do seem to be kept, and so we should be able to
recover without having to reinitialise the GTT from scratch (as prior to
g33, that register is configured by the BIOS and we leave alone except
for the enable bit).
This appears to have been broken by commit 5fbd0418eef2 ("drm/i915:
Re-enable GGTT earlier during resume on pre-gen6 platforms"), which
moved the intel_enable_gtt() from i915_gem_init_hw() (also used by
reset) to add it earlier during hw init and resume, missing the reset
path.
v2: Find the culprit, rearrange ggtt_enable to be before gem_init_hw to
match init/resume
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: 5fbd0418eef2 ("drm/i915: Re-enable GGTT earlier during resume on pre-gen6 platforms")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101852
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170906111405.27110-1-chris@chris-wilson.co.uk
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit 0db8c961209153498fe7e279b8f0d3deb81808f0)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Add the missing __user to the urelocs cast to fix the following sparse
warning:
i915_gem_execbuffer.c:1541:47: warning: cast removes address space of expression
i915_gem_execbuffer.c:1541:62: warning: incorrect type in argument 2 (different address spaces)
i915_gem_execbuffer.c:1541:62: expected void const [noderef] <asn:1>*from
i915_gem_execbuffer.c:1541:62: got char *
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Fixes: 2889caa92321 ("drm/i915: Eliminate lots of iterations over the execobjects array")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170901165434.24636-1-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> #irc
(cherry picked from commit 908a610557f4d8b46a0f82c01e31b30f5c998580)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Commit 6c6b6f28b333 ("loop: set physical block size to PAGE_SIZE")
caused mkfs.xfs to barf on ppc64 [1]. Always using PAGE_SIZE as the
physical block size still makes the most sense semantically, but let's
just lie and always set it to the same value as the logical block size
(same goes for io_min). In the future we might want to at least bump up
io_min to PAGE_SIZE but I'm sick of these stupid changes so let's play
it safe.
1: https://marc.info/?l=linux-xfs&m=150459024723753&w=2
Tested-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Omit an extra message for a memory allocation failure in this function.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
This field hasn't been used since commit 57b691819ee2 ("NFS: Cache
access checks more aggressively").
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
When a byte range lock (or flock) is taken out on an NFS file, the
validity of the cached data is checked and the inode is marked
NFS_INODE_INVALID_DATA. However the cached data isn't flushed from
the page cache.
This is sufficient for future read() requests or mmap() requests as
they call nfs_revalidate_mapping() which performs the flush if
necessary.
However an existing mapping is not affected. Accessing data through
that mapping will continue to return old data even though the inode is
marked NFS_INODE_INVALID_DATA.
This can easily be confirmed using the 'nfs' tool in
git://github.com/okirch/twopence-nfs.git
and running
nfs coherence FILENAME
on one client, and
nfs coherence -r FILENAME
on another client.
It appears that prior to Linux 2.6.0 this worked correctly.
However commit:
http://git.kernel.org/cgit/linux/kernel/git/history/history.git/commit/?id=ca9268fe3ddd075714005adecd4afbd7f9ab87d0
removed the call to inode_invalidate_pages() from nfs_zap_caches(). I
haven't tested this code, but inspection suggests that prior to this
commit, file locking would invalidate all inode pages.
This patch adds a call to nfs_revalidate_mapping() after a
successful SETLK so that invalid data is flushed. With this patch the
above test passes. To minimize impact (and possibly avoid a GETATTR
call) this only happens if the mapping might be mapped into
userspace.
Cc: Olaf Kirch <okir@suse.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
RPC_TASK_NO_RETRANS_TIMEOUT is set when cl_noretranstimeo
is set, which happens when RPC_CLNT_CREATE_NO_RETRANS_TIMEOUT is set,
which happens when NFS_CS_NO_RETRANS_TIMEOUT is set.
This flag means "don't resend on a timeout, only resend if the
connection gets broken for some reason".
cl_discrtry is set when RPC_CLNT_CREATE_DISCRTRY is set, which
happens when NFS_CS_DISCRTRY is set.
This flag means "always disconnect before resending".
NFS_CS_NO_RETRANS_TIMEOUT and NFS_CS_DISCRTRY are both only set
in nfs4_init_client(), and it always sets both.
So we will never have a situation where only one of the flags is set.
So this code, which tests if timeout retransmits are allowed, and
disconnection is required, will never run.
So it makes sense to remove this code as it cannot be tested and
could confuse people reading the code (like me).
(alternately we could leave it there with a comment saying
it is never actually used).
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Commit fbe77c30e9ab ("NFS: move rw_mode to nfs_pageio_header")
reintroduced some pointless code that commit 518662e0fcb9 ("NFS: fix
usage of mempools.") had recently removed.
Remove it again.
Cc: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Don't populate the arrays cdb on the stack, instead make them static.
Makes the object code smaller by 230 bytes:
Before:
text data bss dec hex filename
3797 240 0 4037 fc5 drivers/ata/libata-zpodd.o
After:
text data bss dec hex filename
3407 400 0 3807 edf drivers/ata/libata-zpodd.o
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Intel AHCI controllers that also hide NVMe devices in their bar
can't use MSI interrupts, so disable them.
Reported-by: John Loy <john.robert.loy@gmail.com>
Tested-by: John Loy <john.robert.loy@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Fixes: d684a90d38e2 ("ahci: per-port msix support")
Cc: stable@vger.kernel.org # v4.5+
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Most importantly, solve a crash where %llu was used to format signed
numbers. This would cause a buffer overflow when reading sysfs
writeback_rate_debug, as only 20 bytes were allocated for this and
%llu writes 20 characters plus a null.
Always use the units mechanism rather than having different output
paths for simplicity.
Also, correct problems with display output where 1.10 was a larger
number than 1.09, by multiplying by 10 and then dividing by 1024 instead
of dividing by 100. (Remainders of >= 1000 would print as .10).
Minor changes: Always display the decimal point instead of trying to
omit it based on number of digits shown. Decide what units to use
based on 1000 as a threshold, not 1024 (in other words, always print
at most 3 digits before the decimal point).
Signed-off-by: Michael Lyle <mlyle@lyle.org>
Reported-by: Dmitry Yu Okunev <dyokunev@ut.mephi.ru>
Acked-by: Kent Overstreet <kent.overstreet@gmail.com>
Reviewed-by: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
continue_at() doesn't have a return statement anymore.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Coly Li <colyli@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In olden times, closure_return() used to have a hidden return built in.
We removed the hidden return but forgot to add a new return here. If
"c" were NULL we would oops on the next line, but fortunately "c" is
never NULL. Let's just remove the if statement.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
gc and write-back get raced (see the email "bcache get stucked" I sended
before):
gc thread write-back thread
| |bch_writeback_thread()
|bch_gc_thread() |
| |==>read_dirty()
|==>bch_btree_gc() |
|==>btree_root() //get btree root |
| //node write locker |
|==>bch_btree_gc_root() |
| |==>read_dirty_submit()
| |==>write_dirty()
| |==>continue_at(cl,
| | write_dirty_finish,
| | system_wq);
| |==>write_dirty_finish()//excute
| | //in system_wq
| |==>bch_btree_insert()
| |==>bch_btree_map_leaf_nodes()
| |==>__bch_btree_map_nodes()
| |==>btree_root //try to get btree
| | //root node read
| | //lock
| |-----stuck here
|==>bch_btree_set_root()
|==>bch_journal_meta()
|==>bch_journal()
|==>journal_try_write()
|==>journal_write_unlocked() //journal_full(&c->journal)
| //condition satisfied
|==>continue_at(cl, journal_write, system_wq); //try to excute
| //journal_write in system_wq
| //but work queue is excuting
| //write_dirty_finish()
|==>closure_sync(); //wait journal_write execute
| //over and wake up gc,
|-------------stuck here
|==>release root node write locker
This patch alloc a separate work-queue for write-back thread to avoid such
race.
(Commit log re-organized by Coly Li to pass checkpatch.pl checking)
Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn>
Acked-by: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In currently, we only alloc 6 open buckets for each cache set,
but in usually, we always attach about 10 or so backend devices for
each cache set, and the each bcache device are always accessed by
about 10 or so threads in top application layer. So 6 open buckets
are too few, It has led to that each of the same thread write data
to different buckets, which would cause low efficiency write-back,
and also cause buckets inefficient, and would be Very easy to run
out of.
I add debug message in bch_open_buckets_alloc() to print alloc bucket
info, and test with ten bcache devices with a cache set, and each
bcache device is accessed by ten threads.
From the debug message, we can see that, after the modification, One
bucket is more likely to assign to the same thread, and the data from
the same thread are more likely to write the same bucket. Usually the
same thread always write/read the same backend device, so it is good
for write-back and also promote the usage efficiency of buckets.
Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn>
Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If you encounter any errors in bch_cached_dev_attach it will return
a negative error code. The variable 'v' which stores the result is
unsigned, thus user space sees a very large value returned for bytes
written which can cause incorrect user space behavior. Utilize 1
signed variable to use throughout the function to preserve error return
capability.
Signed-off-by: Tony Asleson <tasleson@redhat.com>
Acked-by: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
__update_write_rate() uses a Proportion-Differentiation Controller
algorithm to control writeback rate. A dirty target number is used in
this PD controller to control writeback rate. A larger target number
will make the writeback rate smaller, on the versus, a smaller target
number will make the writeback rate larger.
bcache uses the following steps to calculate the target number,
1) cache_sectors = all-buckets-of-cache-set * buckets-size
2) cache_dirty_target = cache_sectors * cached-device-writeback_percent
3) target = cache_dirty_target *
(sectors-of-cached-device/sectors-of-all-cached-devices-of-this-cache-set)
The calculation at step 1) for cache_sectors is incorrect, which does
not consider dirty blocks occupied by flash only volume.
A flash only volume can be took as a bcache device without cached
device. All data sectors allocated for it are persistent on cache device
and marked dirty, they are not touched by bcache writeback and garbage
collection code. So data blocks of flash only volume should be ignore
when calculating cache_sectors of cache set.
Current code does not subtract dirty sectors of flash only volume, which
results a larger target number from the above 3 steps. And in sequence
the cache device's writeback rate is smaller then a correct value,
writeback speed is slower on all cached devices.
This patch fixes the incorrect slower writeback rate by subtracting
dirty sectors of flash only volumes in __update_writeback_rate().
(Commit log composed by Coly Li to pass checkpatch.pl checking)
Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn>
Reviewed-by: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
I try to execute the following command to trigger gc thread:
[root@localhost internal]# echo 1 > trigger_gc
But it does not work, I debug the code in gc_should_run(), It works only
if in invalidating or sectors_to_gc < 0. So set sectors_to_gc to -1 to
meet the condition when we trigger gc by manual command.
(Code comments aded by Coly Li)
Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn>
Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Although llist provides proper APIs, they are not used. Make them used.
Signed-off-by: Byungchul Park <byungchul.park@lge.com>
Acked-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Since bypassed IOs use no bucket, so do not subtract sectors_to_gc to
trigger gc thread.
Signed-off-by: tang.junhui <tang.junhui@zte.com.cn>
Acked-by: Coly Li <colyli@suse.de>
Reviewed-by: Eric Wheeler <bcache@linux.ewheeler.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Sequential write IOs were tested with bs=1M by FIO in writeback cache
mode, these IOs were expected to be bypassed, but actually they did not.
We debug the code, and find in check_should_bypass():
if (!congested &&
mode == CACHE_MODE_WRITEBACK &&
op_is_write(bio_op(bio)) &&
(bio-＞bi_opf & REQ_SYNC))
goto rescale
that means, If in writeback mode, a write IO with REQ_SYNC flag will not
be bypassed though it is a sequential large IO, It's not a correct thing
to do actually, so this patch remove these codes.
Signed-off-by: tang.junhui <tang.junhui@zte.com.cn>
Reviewed-by: Kent Overstreet <kent.overstreet@gmail.com>
Reviewed-by: Eric Wheeler <bcache@linux.ewheeler.net>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If blkdev_get_by_path() in register_bcache() fails, we try to lookup the
block device using lookup_bdev() to detect which situation we are in to
properly report error. However we never drop the reference returned to
us from lookup_bdev(). Fix that.
Signed-off-by: Jan Kara <jack@suse.cz>
Acked-by: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When an RX BA session is started by the driver, and it has to tell
mac80211 about it, the corresponding bit in tid_rx_manage_offl gets
set and the BA session work is scheduled. Upon testing this bit, it
will call __ieee80211_start_rx_ba_session(), thus deadlocking as it
already holds the ampdu_mlme.mtx, which that acquires again.
Fix this by adding ___ieee80211_start_rx_ba_session(), a version of
the function that requires the mutex already held.
Cc: stable@vger.kernel.org
Fixes: 699cb58c8a52 ("mac80211: manage RX BA session offload without SKB queue")
Reported-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Commit 7a7c0a6438b8 ("mac80211: fix TX aggregation start/stop callback race")
added a cancellation of the ampdu work after the loop that stopped the
Tx and Rx BA sessions. However, in some cases, e.g., during HW reconfig,
the low level driver might call mac80211 APIs to complete the stopping
of the BA sessions, which would queue the ampdu work to handle the actual
completion. This work needs to be performed as otherwise mac80211 data
structures would not be properly synced.
Fix this by checking if BA session STOP_CB bit is set after the BA session
cancellation and properly clean the session.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
[Johannes: the work isn't flushed because that could do other things we
don't want, and the locking situation isn't clear]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi into 4.14-features
spi: Remove board check from the Falcon driver
MIPS is removing this board check so support a cross tree merge.
|
|
Commit 34c2f668d0f6 ("MIPS: microMIPS: Add unaligned access support.")
added handling of microMIPS instructions to manipulate the stack
pointer. The code that was added violates code style rules with long
lines caused by lots of nested conditionals.
The added code interprets (inline) any known stack pointer manipulation
instruction to find the stack frame size. Handling the microMIPS cases
added quite a bit of complication to this function.
Refactor is_sp_move_ins to perform the interpretation of the immediate
as the instruction manipulating the stack pointer is found. This reduces
the amount of indentation required in get_frame_info, and more closely
matches the operation of is_ra_save_ins.
Suggested-by: Maciej W. Rozycki <macro@imgtec.com>
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16958/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
The stack unwinding code uses the mips_instuction union to decode the
instructions it finds. That union uses the __BITFIELD_FIELD macro to
reorder depending on endianness. The stack unwinding code always places
16bit instructions in halfword 1 of the union. This makes the union
accesses correct for little endian systems. Similarly, 32bit
instructions are reordered such that they are correct for little endian
systems. This handling leaves unwinding the stack on big endian systems
broken, as the mips_instruction union will then look for the fields in
the wrong halfword.
To fix this, use a logical shift to place the 16bit instruction into the
correct position in the word field of the union. Use the same shifting
to order the 2 halfwords of 32bit instuctions. Then replace accesses to
the halfword with accesses to the shifted word.
In the case of the ADDIUS5 instruction, switch to using the
mm16_r5_format union member to avoid the need for a 16bit shift.
Fixes: 34c2f668d0f6 ("MIPS: microMIPS: Add unaligned access support.")
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Cc: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16956/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
When the immediate encoded in the instruction is accessed, it is sign
extended due to being a signed value being assigned to a signed integer.
The ISA specifies that this operation is an unsigned operation.
The sign extension leads us to incorrectly decode:
801e9c8e: cbf1 sw ra,68(sp)
As having an immediate of 1073741809.
Since the instruction format does not specify signed/unsigned, and this
is currently the only location to use this instuction format, change it
to an unsigned immediate.
Fixes: bb9bc4689b9c ("MIPS: Calculate microMIPS ra properly when unwinding the stack")
Suggested-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Cc: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Cc: Miodrag Dinic <miodrag.dinic@imgtec.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16957/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Commit 34c2f668d0f6 ("MIPS: microMIPS: Add unaligned access support.")
added handling of microMIPS instructions to manipulate the stack
pointer. Unfortunately the decoding of the addiusp instruction was
incorrect, and performed a left shift by 2 bits to the raw immediate,
rather than decoding the immediate and then performing the shift, as
documented in the ISA.
This led to incomplete stack traces, due to incorrect frame sizes being
calculated. For example the instruction:
801faee0 <do_sys_poll>:
801faee0: 4e25 addiu sp,sp,-952
As decoded by objdump, would be interpreted by the existing code as
having manipulated the stack pointer by +1096.
Fix this by changing the order of decoding the immediate and applying
the left shift. Also change to accessing the instuction through the
union to avoid the endianness problem of accesing halfword[0], which
will fail on big endian systems.
Cope with the special behaviour of immediates 0x0, 0x1, 0x1fe and 0x1ff
by XORing with 0x100 again if mod(immediate) < 4. This logic was tested
with the following test code:
int main(int argc, char **argv)
{
unsigned int enc;
int imm;
for (enc = 0; enc < 512; ++enc) {
int tmp = enc << 2;
imm = -(signed short)(tmp | ((tmp & 0x100) ? 0xfe00 : 0));
unsigned short tmp = enc;
tmp = (tmp ^ 0x100) - 0x100;
if ((unsigned short)(tmp + 2) < 4)
tmp ^= 0x100;
imm = -(signed short)(tmp << 2);
printf("%#x\t%d\t->\t(%#x\t%d)\t%#x\t%d\n",
enc, enc,
(short)tmp, (short)tmp,
imm, imm);
}
return EXIT_SUCCESS;
}
Which generates the table:
input encoding -> tmp (matching manual) frame size
-----------------------------------------------------------------------
0 0 -> (0x100 256) 0xfffffc00 -1024
0x1 1 -> (0x101 257) 0xfffffbfc -1028
0x2 2 -> (0x2 2) 0xfffffff8 -8
0x3 3 -> (0x3 3) 0xfffffff4 -12
...
0xfe 254 -> (0xfe 254) 0xfffffc08 -1016
0xff 255 -> (0xff 255) 0xfffffc04 -1020
0x100 256 -> (0xffffff00 -256) 0x400 1024
0x101 257 -> (0xffffff01 -255) 0x3fc 1020
...
0x1fc 508 -> (0xfffffffc -4) 0x10 16
0x1fd 509 -> (0xfffffffd -3) 0xc 12
0x1fe 510 -> (0xfffffefe -258) 0x408 1032
0x1ff 511 -> (0xfffffeff -257) 0x404 1028
Thanks to James Hogan for the test code & verifying the logic.
Fixes: 34c2f668d0f6 ("MIPS: microMIPS: Add unaligned access support.")
Suggested-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16955/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
The addiusp instruction uses the pool16d opcode, with bit 0 of the
immediate set. The test for the addiusp opcode erroneously did a logical
and of the immediate with mm_addiusp_func, which has value 1, so this
test always passes when the immediate is non-zero.
Fix the test by replacing the logical and with a bitwise and.
Fixes: 34c2f668d0f6 ("MIPS: microMIPS: Add unaligned access support.")
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16954/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Commit 34c2f668d0f6b ("MIPS: microMIPS: Add unaligned access support.")
added fairly broken support for handling 16bit microMIPS instructions in
get_frame_info(). It adjusts the instruction pointer by 16bits in the
case of a 16bit sp move instruction, but not any other 16bit
instruction.
Commit b6c7a324df37 ("MIPS: Fix get_frame_info() handling of microMIPS
function size") goes some way to fixing get_frame_info() to iterate over
microMIPS instuctions, but the instruction pointer is still manipulated
using a postincrement, and is of union mips_instruction type. Since the
union is sized to the largest member (a word), but microMIPS
instructions are a mix of halfword and word sizes, the function does not
always iterate correctly, ending up misaligned with the instruction
stream and interpreting it incorrectly.
Since the instruction modifying the stack pointer is usually the first
in the function, that one is usually handled correctly. But the
instruction which saves the return address to the sp is some variable
number of instructions into the frame and is frequently missed due to
not being on a word boundary, leading to incomplete walking of the
stack.
Fix this by incrementing the instruction pointer based on the size of
the previously decoded instruction (& remove the hack introduced by
commit 34c2f668d0f6b ("MIPS: microMIPS: Add unaligned access support.")
which adjusts the instruction pointer in the case of a 16bit sp move
instruction, but not any other).
Fixes: 34c2f668d0f6b ("MIPS: microMIPS: Add unaligned access support.")
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16953/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Honor the NL80211_RRF_NO_HT40{MINUS,PLUS} flags in
reg_process_ht_flags_channel. Not doing so leads can lead
to a firmware assert in iwlwifi for example.
Fixes: b0d7aa59592b ("cfg80211: allow wiphy specific regdomain management")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Make the behaviour of clk_get_rate consistent with common clk's
clk_get_rate by accepting NULL clocks as parameter. Some device
drivers rely on this, and will cause an OOPS otherwise.
Fixes: 3f0a06b0368d ("MIPS: ralink: adds clkdev code")
Reported-by: Mathias Kresin <dev@kresin.me>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Cc: John Crispin <john@phrozen.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16778/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Make the behaviour of clk_get_rate consistent with common clk's
clk_get_rate by accepting NULL clocks as parameter, as some device
drivers rely on this.
Make the behaviour of clk_get_rate consistent with common clk's
clk_get_rate by accepting NULL clocks as parameter. Some device
drivers rely on this, and will cause an OOPS otherwise.
Fixes: f8ede0f700f5 ("MIPS: Loongson 2F: Add CPU frequency scaling support")
Reported-by: Mathias Kresin <dev@kresin.me>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16777/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Make the behaviour of clk_get_rate consistent with common clk's
clk_get_rate by accepting NULL clocks as parameter. Some device
drivers rely on this, and will cause an OOPS otherwise.
Fixes: e7300d04bd08 ("MIPS: BCM63xx: Add support for the Broadcom BCM63xx family of SOCs.")
Reported-by: Mathias Kresin <dev@kresin.me>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16776/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Make the behaviour of clk_get_rate consistent with common clk's
clk_get_rate by accepting NULL clocks as parameter. Some device
drivers rely on this, and will cause an OOPS otherwise.
Fixes: 780019ddf02f ("MIPS: AR7: Implement clock API")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reported-by: Mathias Kresin <dev@kresin.me>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16775/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
The channels are only 0x40 bytes large, so 0x40 would be the next one's
CHANCFG_REG. Also the position makes it clear that this was intended to
be 0x04. So clearly a typo.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: bcm-kernel-feedback-list@broadcom.com
Patchwork: https://patchwork.linux-mips.org/patch/15316/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
On allocating the interrupts routed via a wire-to-MSI bridge, the allocator
iterates over the MSI descriptors to build the hierarchy, but fails to use
the descriptor interrupt number, and instead uses the base number,
generating the wrong IRQ domain mappings.
The fix is to use the MSI descriptor interrupt number when setting up
the interrupt instead of the base interrupt for the allocation range.
The only saving grace is that although the MSI descriptors are allocated
in bulk, the wired interrupts are only allocated one by one (so
desc->irq == virq) and the bug went unnoticed so far.
Fixes: 2145ac9310b60 ("genirq/msi: Add msi_domain_populate_irqs")
Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20170906103540.373864a2.john@metanate.com
|
