| Age | Commit message (Collapse) | Author |
|---|
|
When re-using the CMA area for kdump there is a risk of pending DMA into
pinned user pages in the CMA area.
Pages residing in CMA areas can usually not get long-term pinned and are
instead migrated away from the CMA area, so long-term pinning is typically
not a concern. (BUGs in the kernel might still lead to long-term pinning
of such pages if everything goes wrong.)
Pages pinned without FOLL_LONGTERM remain in the CMA and may possibly be
the source or destination of a pending DMA transfer.
Although there is no clear specification how long a page may be pinned
without FOLL_LONGTERM, pinning without the flag shows an intent of the
caller to only use the memory for short-lived DMA transfers, not a
transfer initiated by a device asynchronously at a random time in the
future.
Add a delay of CMA_DMA_TIMEOUT_SEC seconds before starting the kdump
kernel, giving such short-lived DMA transfers time to finish before the
CMA memory is re-used by the kdump kernel.
Set CMA_DMA_TIMEOUT_SEC to 10 seconds - chosen arbitrarily as both a huge
margin for a DMA transfer, yet not increasing the kdump time too
significantly.
Link: https://lkml.kernel.org/r/aEqpgDIBndZ5LXSo@dwarf.suse.cz
Signed-off-by: Jiri Bohac <jbohac@suse.cz>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Donald Dutile <ddutile@redhat.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Philipp Rudo <prudo@redhat.com>
Cc: Pingfan Liu <piliu@redhat.com>
Cc: Tao Liu <ltao@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Describe the new crashkernel ",cma" suffix in Documentation/
Link: https://lkml.kernel.org/r/aEqpQwUy6gqSiUkV@dwarf.suse.cz
Signed-off-by: Jiri Bohac <jbohac@suse.cz>
Cc: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Donald Dutile <ddutile@redhat.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Philipp Rudo <prudo@redhat.com>
Cc: Pingfan Liu <piliu@redhat.com>
Cc: Tao Liu <ltao@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
reserve_crashkernel_cma() reserves CMA ranges for the crash kernel. If
allocating the requested size fails, try to reserve in smaller blocks.
Store the reserved ranges in the crashk_cma_ranges array and the number of
ranges in crashk_cma_cnt.
Link: https://lkml.kernel.org/r/aEqpBwOy_ekm0gw9@dwarf.suse.cz
Signed-off-by: Jiri Bohac <jbohac@suse.cz>
Cc: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Donald Dutile <ddutile@redhat.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Philipp Rudo <prudo@redhat.com>
Cc: Pingfan Liu <piliu@redhat.com>
Cc: Tao Liu <ltao@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "kdump: crashkernel reservation from CMA", v5.
This series implements a way to reserve additional crash kernel memory
using CMA.
Currently, all the memory for the crash kernel is not usable by the 1st
(production) kernel. It is also unmapped so that it can't be corrupted by
the fault that will eventually trigger the crash. This makes sense for
the memory actually used by the kexec-loaded crash kernel image and initrd
and the data prepared during the load (vmcoreinfo, ...). However, the
reserved space needs to be much larger than that to provide enough
run-time memory for the crash kernel and the kdump userspace. Estimating
the amount of memory to reserve is difficult. Being too careful makes
kdump likely to end in OOM, being too generous takes even more memory from
the production system. Also, the reservation only allows reserving a
single contiguous block (or two with the "low" suffix). I've seen systems
where this fails because the physical memory is fragmented.
By reserving additional crashkernel memory from CMA, the main crashkernel
reservation can be just large enough to fit the kernel and initrd image,
minimizing the memory taken away from the production system. Most of the
run-time memory for the crash kernel will be memory previously available
to userspace in the production system. As this memory is no longer
wasted, the reservation can be done with a generous margin, making kdump
more reliable. Kernel memory that we need to preserve for dumping is
normally not allocated from CMA, unless it is explicitly allocated as
movable. Currently this is only the case for memory ballooning and zswap.
Such movable memory will be missing from the vmcore. User data is
typically not dumped by makedumpfile. When dumping of user data is
intended this new CMA reservation cannot be used.
There are five patches in this series:
The first adds a new ",cma" suffix to the recenly introduced generic
crashkernel parsing code. parse_crashkernel() takes one more argument to
store the cma reservation size.
The second patch implements reserve_crashkernel_cma() which performs the
reservation. If the requested size is not available in a single range,
multiple smaller ranges will be reserved.
The third patch updates Documentation/, explicitly mentioning the
potential DMA corruption of the CMA-reserved memory.
The fourth patch adds a short delay before booting the kdump kernel,
allowing pending DMA transfers to finish.
The fifth patch enables the functionality for x86 as a proof of
concept. There are just three things every arch needs to do:
- call reserve_crashkernel_cma()
- include the CMA-reserved ranges in the physical memory map
- exclude the CMA-reserved ranges from the memory available
through /proc/vmcore by excluding them from the vmcoreinfo
PT_LOAD ranges.
Adding other architectures is easy and I can do that as soon as this
series is merged.
With this series applied, specifying
crashkernel=100M craskhernel=1G,cma
on the command line will make a standard crashkernel reservation
of 100M, where kexec will load the kernel and initrd.
An additional 1G will be reserved from CMA, still usable by the production
system. The crash kernel will have 1.1G memory available. The 100M can
be reliably predicted based on the size of the kernel and initrd.
The new cma suffix is completely optional. When no
crashkernel=size,cma is specified, everything works as before.
This patch (of 5):
Add a new cma_size parameter to parse_crashkernel(). When not NULL, call
__parse_crashkernel to parse the CMA reservation size from
"crashkernel=size,cma" and store it in cma_size.
Set cma_size to NULL in all calls to parse_crashkernel().
Link: https://lkml.kernel.org/r/aEqnxxfLZMllMC8I@dwarf.suse.cz
Link: https://lkml.kernel.org/r/aEqoQckgoTQNULnh@dwarf.suse.cz
Signed-off-by: Jiri Bohac <jbohac@suse.cz>
Cc: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Donald Dutile <ddutile@redhat.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Philipp Rudo <prudo@redhat.com>
Cc: Pingfan Liu <piliu@redhat.com>
Cc: Tao Liu <ltao@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
All of the ID tables based on <linux/mod_devicetable.h> (of_device_id,
pci_device_id, ...) require their arrays to end in an empty sentinel
value. That's usually spelled with an empty initializer entry (e.g.,
"{}"), but also sometimes with explicit 0 entries, field initializers
(e.g., '.id = ""'), or even a macro entry (like PCMCIA_DEVICE_NULL).
Without a sentinel, device-matching code may read out of bounds.
I've found a number of such bugs in driver reviews, and we even
occasionally commit one to the tree. See commit 5751eee5c620 ("i2c:
nomadik: Add missing sentinel to match table") for example.
Teach checkpatch to find these ID tables, and complain if it looks like
there wasn't a sentinel value.
Test output:
$ git format-patch -1 a0d15cc47f29be6d --stdout | scripts/checkpatch.pl -
ERROR: missing sentinel in ID array
#57: FILE: drivers/i2c/busses/i2c-nomadik.c:1073:
+static const struct of_device_id nmk_i2c_eyeq_match_table[] = {
{
.compatible = "XXXXXXXXXXXXXXXXXX",
.data = (void *)(NMK_I2C_EYEQ_FLAG_32B_BUS | NMK_I2C_EYEQ_FLAG_IS_EYEQ5),
},
};
total: 1 errors, 0 warnings, 66 lines checked
NOTE: For some of the reported defects, checkpatch may be able to
mechanically convert to the typical style using --fix or --fix-inplace.
"[PATCH] i2c: nomadik: switch from of_device_is_compatible() to" has style problems, please review.
NOTE: If any of the errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.
When run across the entire tree (scripts/checkpatch.pl -q --types
MISSING_SENTINEL -f ...), false positives exist:
* where macros are used that hide the table from analysis
(e.g., drivers/gpu/drm/radeon/radeon_drv.c / radeon_PCI_IDS).
There are fewer than 5 of these.
* where such tables are processed correctly via ARRAY_SIZE() (fewer than
5 instances). This is by far not the typical usage of *_device_id
arrays.
* some odd parsing artifacts, where ctx_statement_block() seems to quit
in the middle of a block due to #if/#else/#endif.
Also, not every "struct *_device_id" is in fact a sentinel-requiring
structure, but even with such types, false positives are very rare.
Link: https://lkml.kernel.org/r/20250702235245.1007351-1-briannorris@chromium.org
Signed-off-by: Brian Norris <briannorris@chromium.org>
Acked-by: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Brian Norris <briannorris@chromium.org>
Cc: Dwaipayan Ray <dwaipayanray1@gmail.com>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add the set_syscall_info test binary to .gitignore to avoid tracking build
artifacts in the ptrace selftests directory.
Link: https://lkml.kernel.org/r/20250623183405.133434-2-moonhee.lee.ca@gmail.com
Signed-off-by: Moon Hee Lee <moonhee.lee.ca@gmail.com>
Cc: "Dmitry V. Levin" <ldv@strace.io>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When commit d3556babd7fa ("ocfs2: fix d_splice_alias() return code
checking") was merged into v3.18-rc3, d_splice_alias() was returning one
of a valid dentry, NULL or an ERR_PTR.
When commit b5ae6b15bd73 ("merge d_materialise_unique() into
d_splice_alias()") was merged into v3.19-rc1, d_splice_alias() started
returning -ELOOP as one of ERR_PTR values.
Now, when syzkaller mounts a crafted ocfs2 filesystem image that hits
d_splice_alias() == -ELOOP case from ocfs2_lookup(), ocfs2_lookup() fails
to handle -ELOOP case and generic_shutdown_super() hits "VFS: Busy inodes
after unmount" message.
Instead of calling ocfs2_dentry_attach_lock() or ocfs2_dentry_attach_gen()
when d_splice_alias() returned an ERR_PTR value, change ocfs2_lookup() to
bail out immediately.
Also, ocfs2_lookup() needs to call dupt() when ocfs2_dentry_attach_lock()
returned an ERR_PTR value.
Link: https://lkml.kernel.org/r/da5be67d-2a0b-4b93-85d6-42f3b7440135@I-love.SAKURA.ne.jp
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: syzbot <syzbot+1134d3a5b062e9665a7a@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=1134d3a5b062e9665a7a
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Tetsuo Handa <penguin-kernel@i-love-sakura.ne.jp>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
There are two cleanups for vmcore_add_device_dump(). Return -ENOMEM
directly rather than goto the label to simplify the code and use
scoped_guard() to simplify the lock/unlock code.
Link: https://lkml.kernel.org/r/20250626105440.1053139-1-suhui@nfschina.com
Signed-off-by: Su Hui <suhui@nfschina.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Suhui <suhui@nfschina.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
As previous contributions were made with the older email address, which is
no longer in use. Update my new address to map the old one.
Link: https://lkml.kernel.org/r/20250624141220.1264691-1-sachin.mokashi@intel.com
Signed-off-by: Sachin Mokashi <sachin.mokashi@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Since lockdep_set_class() uses stringified key name via macro, calling
lockdep_set_class() with an array causes lockdep warning messages to
report variable name than actual index number.
Change ocfs2_init_locked_inode() to pass actual index number for better
readability of lockdep reports. This patch does not change behavior.
Before:
Chain exists of:
&ocfs2_sysfile_lock_key[args->fi_sysfile_type] --> jbd2_handle --> &oi->ip_xattr_sem
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&oi->ip_xattr_sem);
lock(jbd2_handle);
lock(&oi->ip_xattr_sem);
lock(&ocfs2_sysfile_lock_key[args->fi_sysfile_type]);
*** DEADLOCK ***
After:
Chain exists of:
&ocfs2_sysfile_lock_key[EXTENT_ALLOC_SYSTEM_INODE] --> jbd2_handle --> &oi->ip_xattr_sem
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&oi->ip_xattr_sem);
lock(jbd2_handle);
lock(&oi->ip_xattr_sem);
lock(&ocfs2_sysfile_lock_key[EXTENT_ALLOC_SYSTEM_INODE]);
*** DEADLOCK ***
Link: https://lkml.kernel.org/r/29348724-639c-443d-bbce-65c3a0a13a38@I-love.SAKURA.ne.jp
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Problem
=======
The "getdelays" can only display the latency of a single task
by specifying a PID, but it has the following limitations:
1. single-task perspective: only supports querying the latency (CPU, I/O,
memory, etc.) of an individual task via PID and cannot provide a global
analysis of high-latency processes across the system.
2. lack of High-Latency process awareness: when the overall system
latency is high (e.g., a spike in CPU latency), there is no way to
quickly identify the top N processes contributing to the highest
latency.
3. poor interactivity: It lacks dynamic sorting and refresh
capabilities (similar to top), making it difficult to monitor latency
changes in real time.
Solution
========
To address these limitations, we introduce the "delaytop" with the
following capabilities:
1. system view: monitors latency metrics (CPU, I/O, memory, IRQ, etc.)
for all system processes
2. supports field-based sorting (e.g., default sort by CPU latency in
descending order)
3. dynamic interactive interface: focus on specific processes with
--pid; limit displayed entries with --processes 20; control monitoring
duration with --iterations;
Use case
========
bash# ./delaytop
Top 20 processes (sorted by CPU delay):
PID TGID COMMAND CPU(ms) IO(ms) SWAP(ms) RCL(ms) THR(ms) CMP(ms) WP(ms) IRQ(ms)
---------------------------------------------------------------------------------------------
26 26 kworker/1:0H 5.55 0.00 0.00 0.00 0.00 0.00 0.00 0.00
32 32 kworker/2:0H-kb 2.93 0.00 0.00 0.00 0.00 0.00 0.00 0.00
38 38 kworker/3:0H-ev 2.88 0.00 0.00 0.00 0.00 0.00 0.00 0.00
84 84 kworker/R-vfio- 1.62 0.00 0.00 0.00 0.00 0.00 0.00 0.00
24 24 ksoftirqd/1 1.43 0.00 0.00 0.00 0.00 0.00 0.00 0.00
19 19 idle_inject/0 0.99 0.00 0.00 0.00 0.00 0.00 0.00 0.00
16 16 rcu_exp_par_gp_ 0.87 0.00 0.00 0.00 0.00 0.00 0.00 0.00
11 11 kworker/0:1 0.87 0.00 0.00 0.00 0.00 0.00 0.00 0.00
22 22 idle_inject/1 0.80 0.00 0.00 0.00 0.00 0.00 0.00 0.00
3 3 pool_workqueue_ 0.74 0.00 0.00 0.00 0.00 0.00 0.00 0.00
81 81 scsi_eh_1 0.59 0.00 0.00 0.00 0.00 0.00 0.00 0.00
30 30 ksoftirqd/2 0.42 0.00 0.00 0.00 0.00 0.00 0.00 0.00
36 36 ksoftirqd/3 0.37 0.00 0.00 0.00 0.00 0.00 0.00 0.00
9 9 kworker/0:0-eve 0.36 0.00 0.00 0.00 0.00 0.00 0.00 0.00
8 8 kworker/R-netns 0.34 0.00 0.00 0.00 0.00 0.00 0.00 0.00
76 76 kworker/1:1-pm 0.32 0.00 0.00 0.00 0.00 0.00 0.00 0.00
21 21 cpuhp/1 0.30 0.00 0.00 0.00 0.00 0.00 0.00 0.00
4 4 kworker/R-rcu_g 0.21 0.00 0.00 0.00 0.00 0.00 0.00 0.00
12 12 kworker/u16:0-i 0.20 0.00 0.00 0.00 0.00 0.00 0.00 0.00
1 1 init 0.18 0.00 0.00 0.00 0.00 0.00 0.08 0.00
Link: https://lkml.kernel.org/r/20250619211843633h05gWrBDMFkEH6xAVm_5y@zte.com.cn
Co-developed-by: Fan Yu <fan.yu9@zte.com.cn>
Signed-off-by: Fan Yu <fan.yu9@zte.com.cn>
Signed-off-by: Yaxin Wang <wang.yaxin@zte.com.cn>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Peilin He <he.peilin@zte.com.cn>
Cc: Qiang Tu <tu.qiang35@zte.com.cn>
Cc: wangyong <wang.yong12@zte.com.cn>
Cc: xu xin <xu.xin16@zte.com.cn>
Cc: Yang Yang <yang.yang29@zte.com.cn>
Cc: ye xingchen <ye.xingchen@zte.com.cn>
Cc: Yunkai Zhang <zhang.yunkai@zte.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
fsfuzzer may make many invalid access for FAT-fs and generate many kmsg
like "FAT-fs (loop2): error, invalid access to FAT (entry 0x00000ccb)".
For platforms & os that enables hardware serial device whose speed are
slow, this may cause softlockup easily.
So let's ratelimit the error log.
The log as below:
[11916.242560] FAT-fs (loop2): error, invalid access to FAT (entry 0x00000ccb)
[11916.254485] FAT-fs (loop2): error, invalid access to FAT (entry 0x00000ccb)
[11916.266388] FAT-fs (loop2): error, invalid access to FAT (entry 0x00000ccb)
[11916.278287] FAT-fs (loop2): error, invalid access to FAT (entry 0x00000ccb)
[11916.290180] FAT-fs (loop2): error, invalid access to FAT (entry 0x00000ccb)
[11916.302068] FAT-fs (loop2): error, invalid access to FAT (entry 0x00000ccb)
[11916.313962] FAT-fs (loop2): error, invalid access to FAT (entry 0x00000ccb)
[11916.325848] FAT-fs (loop2): error, invalid access to FAT (entry 0x00000ccb)
[11916.337732] FAT-fs (loop2): error, invalid access to FAT (entry 0x00000ccb)
[11916.349619] FAT-fs (loop2): error, invalid access to FAT (entry 0x00000ccb)
[11916.361505] FAT-fs (loop2): error, invalid access to FAT (entry 0x00000ccb)
[11916.373391] FAT-fs (loop2): error, invalid access to FAT (entry 0x00000ccb)
[11916.385272] FAT-fs (loop2): error, invalid access to FAT (entry 0x00000ccb)
[11916.397144] FAT-fs (loop2): error, invalid access to FAT (entry 0x00000ccb)
[11916.409025] FAT-fs (loop2): error, invalid access to FAT (entry 0x00000ccb)
[11916.420909] FAT-fs (loop2): error, invalid access to FAT (entry 0x00000ccb)
[11916.432791] FAT-fs (loop2): error, invalid access to FAT (entry 0x00000ccb)
[11916.444674] FAT-fs (loop2): error, invalid access to FAT (entry 0x00000ccb)
[11916.456558] FAT-fs (loop2): error, invalid access to FAT (entry 0x00000ccb)
[11916.468446] FAT-fs (loop2): error, invalid access to FAT (entry 0x00000ccb)
[11916.480352] watchdog: BUG: soft lockup - CPU#58 stuck for 26s! [cat:2446035]
[11916.480357] Modules linked in: ...
[11916.480503] CPU: 58 PID: 2446035 Comm: cat Kdump: loaded Tainted: ...
[11916.480508] Hardware name: vclusters VSFT5000 B/VSFT5000 B, BIOS ...
[11916.480510] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[11916.480513] pc : console_emit_next_record+0x1b4/0x288
[11916.480524] lr : console_emit_next_record+0x1ac/0x288
[11916.480525] sp : ffff80009bcdae90
[11916.480527] x29: ffff80009bcdaec0 x28: ffff800082513810 x27: 0000000000000001
[11916.480530] x26: 0000000000000001 x25: ffff800081f66000 x24: 0000000000000000
[11916.480533] x23: 0000000000000000 x22: ffff80009bcdaf8f x21: 0000000000000001
[11916.480535] x20: 0000000000000000 x19: ffff800082513810 x18: ffffffffffffffff
[11916.480538] x17: 0000000000000002 x16: 0000000000000001 x15: ffff80009bcdab30
[11916.480541] x14: 0000000000000000 x13: 205d353330363434 x12: 32545b5d36343438
[11916.480543] x11: 652820544146206f x10: 7420737365636361 x9 : ffff800080159a6c
[11916.480546] x8 : 69202c726f727265 x7 : 545b5d3634343836 x6 : 342e36313931315b
[11916.480549] x5 : ffff800082513a01 x4 : ffff80009bcdad31 x3 : 0000000000000000
[11916.480551] x2 : 00000000ffffffff x1 : 0000000001b9b000 x0 : ffff8000836cef00
[11916.480554] Call trace:
[11916.480557] console_emit_next_record+0x1b4/0x288
[11916.480560] console_flush_all+0xcc/0x190
[11916.480563] console_unlock+0x78/0x138
[11916.480565] vprintk_emit+0x1c4/0x210
[11916.480568] vprintk_default+0x40/0x58
[11916.480570] vprintk+0x84/0xc8
[11916.480572] _printk+0x68/0xa0
[11916.480578] _fat_msg+0x6c/0xa0 [fat]
[11916.480593] __fat_fs_error+0xf8/0x118 [fat]
[11916.480601] fat_ent_read+0x164/0x238 [fat]
[11916.480609] fat_get_cluster+0x180/0x2c8 [fat]
[11916.480617] fat_get_mapped_cluster+0xb8/0x170 [fat]
Link: https://lkml.kernel.org/r/20250620020231.9292-1-me@linux.beauty
Signed-off-by: Li Chen <chenl311@chinatelecom.cn>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Christian Brauner <brauner@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
With commit 343f4c49f243 ("kthread: Don't allocate kthread_struct for init
and umh") and commit 753550eb0ce1 ("fork: Explicitly set PF_KTHREAD"), umh
task no longer have struct kthread and PF_KTHREAD flag.
Update the comment to describe what the current rules are to detect
is something is a kthread.
Link: https://lkml.kernel.org/r/20250620100801.23185-1-jqqlijiazi@gmail.com
Signed-off-by: Jiazi Li <jqqlijiazi@gmail.com>
Signed-off-by: mingzhu.wang <mingzhu.wang@transsion.com>
Suggested-by Eric W . Biederman <ebiederm@xmission.com>
Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
With sanitizers enabled, this function uses a lot of stack, causing a
harmless warning:
lib/test_objagg.c: In function 'test_hints_case.constprop':
lib/test_objagg.c:994:1: error: the frame size of 1440 bytes is larger than 1408 bytes [-Werror=frame-larger-than=]
Most of this is from the two 'struct world' structures. Since most of the
work in this function is duplicated for the two, split it up into separate
functions that each use one of them.
The combined stack usage is still the same here, but there is no warning
any more, and the code is still safe because of the known call chain.
Link: https://lkml.kernel.org/r/20250620111907.3395296-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Cc: Song Liu <song@kernel.org>
Cc: Yu Kuai <yukuai3@huawei.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Use the system-wide zero page instead of a custom zero page.
[herbert@gondor.apana.org.au: update lib/raid6/recov_rvv.c, per Klara]
Link: https://lkml.kernel.org/r/aFkUnXWtxcgOTVkw@gondor.apana.org.au
Link: https://lkml.kernel.org/r/Z9flJNkWQICx0PXk@gondor.apana.org.au
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Song Liu <song@kernel.org>
Cc: Yu Kuai <yukuai3@huawei.com>
Cc: Klara Modin <klarasmodin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Since these are now no longer defines, but in an enum.
Link: https://lkml.kernel.org/r/20250618134629.25700-2-johannes@sipsolutions.net
Fixes: 101f2bbab541 ("fs: convert mount flags to enum")
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
There is an unneeded OR in the ifdef functions that are used to allocate
and free kernel stacks based on direct map or vmap. Adding dynamic stack
support would complicate this logic even further.
Therefore, clean up by changing the order so OR is no longer needed.
Link: https://lkml.kernel.org/r/20250618-fork-fixes-v4-1-2e05a2e1f5fc@linaro.org
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Link: https://lore.kernel.org/20240311164638.2015063-3-pasha.tatashin@soleen.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The code checks newfe_bh for NULL after it has already been dereferenced
to access b_data. This NULL check is unnecessary for two reasons:
1. If ocfs2_inode_lock() succeeds (returns >= 0), newfe_bh is guaranteed
to be valid.
2. We've already dereferenced newfe_bh to access b_data, so it must be
non-NULL at this point.
Remove the redundant NULL check in the trace_ocfs2_rename_over_existing()
call to improve code clarity.
Link: https://lkml.kernel.org/r/20250617012534.3458669-1-leo.lilong@huawei.com
Signed-off-by: Long Li <leo.lilong@huawei.com>
Reviewed-by: Su Yue <glass.su@suse.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The reproducer uses FAULT_INJECTION to make memory allocation fail, which
causes __filemap_get_folio() to fail, when initializing w_folios[i] in
ocfs2_grab_folios_for_write(), it only returns an error code and the value
of w_folios[i] is the error code, which causes
ocfs2_unlock_and_free_folios() to recycle the invalid w_folios[i] when
releasing folios.
Link: https://lkml.kernel.org/r/20250616013140.3602219-1-lizhi.xu@windriver.com
Reported-by: syzbot+c2ea94ae47cd7e3881ec@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=c2ea94ae47cd7e3881ec
Signed-off-by: Lizhi Xu <lizhi.xu@windriver.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
There's error path that could lead to inactive uprobe:
1) uprobe_register succeeds - updates instruction to int3 and
changes ref_ctr from 0 to 1
2) uprobe_unregister fails - int3 stays in place, but ref_ctr
is changed to 0 (it's not restored to 1 in the fail path)
uprobe is leaked
3) another uprobe_register comes and re-uses the leaked uprobe
and succeds - but int3 is already in place, so ref_ctr update
is skipped and it stays 0 - uprobe CAN NOT be triggered now
4) uprobe_unregister fails because ref_ctr value is unexpected
Fix this by reverting the updated ref_ctr value back to 1 in step 2),
which is the case when uprobe_unregister fails (int3 stays in place), but
we have already updated refctr.
The new scenario will go as follows:
1) uprobe_register succeeds - updates instruction to int3 and
changes ref_ctr from 0 to 1
2) uprobe_unregister fails - int3 stays in place and ref_ctr
is reverted to 1.. uprobe is leaked
3) another uprobe_register comes and re-uses the leaked uprobe
and succeds - but int3 is already in place, so ref_ctr update
is skipped and it stays 1 - uprobe CAN be triggered now
4) uprobe_unregister succeeds
Link: https://lkml.kernel.org/r/20250514101809.2010193-1-jolsa@kernel.org
Fixes: 1cc33161a83d ("uprobes: Support SDT markers having reference count (semaphore)")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Suggested-by: Oleg Nesterov <oleg@redhat.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The current code that checks for misspelling verifies, in a more
complex regex, if $rawline matches [^\w]($misspellings)[^\w]
Being $rawline a byte-string, a utf-8 character in $rawline can
match the non-word-char [^\w].
E.g.:
./scripts/checkpatch.pl --git 81c2f059ab9
WARNING: 'ment' may be misspelled - perhaps 'meant'?
#36: FILE: MAINTAINERS:14360:
+M: Clément Léger <clement.leger@bootlin.com>
^^^^
Use a utf-8 version of $rawline for spell checking.
Link: https://lkml.kernel.org/r/20250616-b4-checkpatch-upstream-v2-1-5600ce4a3b43@foss.st.com
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Dwaipayan Ray <dwaipayanray1@gmail.com>
Cc: Joe Perches <joe@perches.com>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The current implementation forces a compile-time 1/0 division, which
generates an undefined instruction (ud2 on x86) rather than a proper
runtime division-by-zero exception.
Change to trigger an actual div-by-0 exception at runtime, consistent with
other division operations. Use a non-1 dividend to prevent the compiler
from optimizing the division into a comparison.
Link: https://lkml.kernel.org/r/q246p466-1453-qon9-29so-37105116009q@onlyvoer.pbz
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Cc: Biju Das <biju.das.jz@bp.renesas.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Weißschuh <linux@weissschuh.net>
Cc: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Cc: David Laight <david.laight.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The commit 482a3767e508 ("exit: reparent: call forget_original_parent()
under tasklist_lock") moved the comment from exit_notify() to
forget_original_parent(). However, the forget_original_parent() only
handles (A), while (B) is handled in kill_orphaned_pgrp(). So remove the
unrelated part.
Link: https://lkml.kernel.org/r/20250615030930.58051-1-wangfushuai@baidu.com
Signed-off-by: Fushuai Wang <wangfushuai@baidu.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: wangfushuai <wangfushuai@baidu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
change '__santizer_cov_trace_pc()' to '__sanitizer_cov_trace_pc()'
Link: https://lkml.kernel.org/r/20250615123237.110144-1-n9winx@163.com
Signed-off-by: Wei Nanxin <n9winx@163.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Macro Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
It really doesn't matter if the user/admin knows what the last too big
value is. Record how many times this case is triggered would be helpful.
Solve the existing issue where relay_reset() doesn't restore the value.
Store the counter in the per-cpu buffer structure instead of the global
buffer structure. It also solves the racy condition which is likely to
happen when a few of per-cpu buffers encounter the too big data case and
then access the global field last_toobig without lock protection.
Remove the printk in relay_close() since kernel module can directly call
relay_stats() as they want.
Link: https://lkml.kernel.org/r/20250612061201.34272-6-kerneljasonxing@gmail.com
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Yushan Zhou <katrinzhou@tencent.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Replace internal subbuf_start in blktrace with the default policy in
relayfs.
Remove dropped field from struct blktrace. Correspondingly, call the
common helper in relay. By incrementing full_count to keep track of how
many times we encountered a full buffer issue, user space will know how
many events were lost.
Link: https://lkml.kernel.org/r/20250612061201.34272-5-kerneljasonxing@gmail.com
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Yushan Zhou <katrinzhou@tencent.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In this version, only support getting the counter for buffer full and
implement the framework of how it works.
Users can pass certain flag to fetch what field/statistics they expect to
know. Each time it only returns one result. So do not pass multiple
flags.
Link: https://lkml.kernel.org/r/20250612061201.34272-4-kerneljasonxing@gmail.com
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Yushan Zhou <katrinzhou@tencent.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When using relay mechanism, we often encounter the case where new data are
lost or old unconsumed data are overwritten because of slow reader.
Add 'full' field in per-cpu buffer structure to detect if the above case
is happening. Relay has two modes: 1) non-overwrite mode, 2) overwrite
mode. So buffer being full here respectively means: 1) relayfs doesn't
intend to accept new data and then simply drop them, or 2) relayfs is
going to start over again and overwrite old unread data with new data.
Note: this counter doesn't need any explicit lock to protect from being
modified by different threads for the better performance consideration.
Writers calling __relay_write/relay_write should consider how to use the
lock and ensure it performs under the lock protection, thus it's not
necessary to add a new small lock here.
Link: https://lkml.kernel.org/r/20250612061201.34272-3-kerneljasonxing@gmail.com
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Yushan Zhou <katrinzhou@tencent.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "relayfs: misc changes", v5.
The series mostly focuses on the error counters which helps every user
debug their own kernel module.
This patch (of 5):
prev_padding represents the unused space of certain subbuffer. If the
content of a call of relay_write() exceeds the limit of the remainder of
this subbuffer, it will skip storing in the rest space and record the
start point as buf->prev_padding in relay_switch_subbuf(). Since the buf
is a per-cpu big buffer, the point of prev_padding as a global value for
the whole buffer instead of a single subbuffer (whose padding info is
stored in buf->padding[]) seems meaningless from the real use cases, so we
don't bother to record it any more.
Link: https://lkml.kernel.org/r/20250612061201.34272-1-kerneljasonxing@gmail.com
Link: https://lkml.kernel.org/r/20250612061201.34272-2-kerneljasonxing@gmail.com
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Yushan Zhou <katrinzhou@tencent.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Remove an access to page->mapping and a few calls to the old page-based
APIs. This doesn't support large folios, but it's still a nice
improvement.
Link: https://lkml.kernel.org/r/20250612143903.2849289-3-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Phillip Lougher <phillip@squashfs.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "squashfs: Remove page->mapping references".
We're close to being able to kill page->mapping. These two patches get us
a little bit closer.
This patch (of 2):
Eliminate a reference to page->mapping by passing the inode from the
caller.
Link: https://lkml.kernel.org/r/20250612143903.2849289-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20250612143903.2849289-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Phillip Lougher <phillip@squashfs.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Passing the __GFP_ZERO flag to alloc_page should result in less overhead
th= an using memset()
Link: https://lkml.kernel.org/r/20250610225639.314970-3-git@elijahs.space
Signed-off-by: Elijah Wright <git@elijahs.space>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The current allocation of VMAP stack memory is using (THREADINFO_GFP &
~__GFP_ACCOUNT) which is a complicated way of saying (GFP_KERNEL |
__GFP_ZERO):
<linux/thread_info.h>:
define THREADINFO_GFP (GFP_KERNEL_ACCOUNT | __GFP_ZERO)
<linux/gfp_types.h>:
define GFP_KERNEL_ACCOUNT (GFP_KERNEL | __GFP_ACCOUNT)
This is an unfortunate side-effect of independent changes blurring the
picture:
commit 19809c2da28aee5860ad9a2eff760730a0710df0 changed (THREADINFO_GFP |
__GFP_HIGHMEM) to just THREADINFO_GFP since highmem became implicit.
commit 9b6f7e163cd0f468d1b9696b785659d3c27c8667 then added stack caching
and rewrote the allocation to (THREADINFO_GFP & ~__GFP_ACCOUNT) as cached
stacks need to be accounted separately. However that code, when it
eventually accounts the memory does this:
ret = memcg_kmem_charge(vm->pages[i], GFP_KERNEL, 0)
so the memory is charged as a GFP_KERNEL allocation.
Define a unique GFP_VMAP_STACK to use
GFP_KERNEL | __GFP_ZERO and move the comment there.
Link: https://lkml.kernel.org/r/20250509-gfp-stack-v1-1-82f6f7efc210@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reported-by: Mateusz Guzik <mjguzik@gmail.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
There are two data types: "struct vm_struct" and "struct vm_stack" that
have the same local variable names: vm_stack, or vm, or s, which makes the
code confusing to read.
Change the code so the naming is consistent:
struct vm_struct is always called vm_area
struct vm_stack is always called vm_stack
One change altering vfree(vm_stack) to vfree(vm_area->addr) may look like
a semantic change but it is not: vm_area->addr points to the vm_stack.
This was done to improve readability.
[linus.walleij@linaro.org: rebased and added new users of the variable names, address review comments]
Link: https://lore.kernel.org/20240311164638.2015063-4-pasha.tatashin@soleen.com
Link: https://lkml.kernel.org/r/20250509-fork-fixes-v3-2-e6c69dd356f2@linaro.org
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Replace sprintf() with the safer variant scnprintf() and use its return
value instead of calculating the string length again using strlen().
Use strscpy() instead of the deprecated strcpy().
No functional changes intended.
Link: https://github.com/KSPP/linux/issues/88
Link: https://lkml.kernel.org/r/20250521121840.5653-1-thorsten.blum@linux.dev
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: guoweikang <guoweikang.kernel@gmail.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
kstrtol() is better because simple_strtol() ignores overflow. And using
kstrtol() is more concise.
Link: https://lkml.kernel.org/r/20250527092333.1917391-1-suhui@nfschina.com
Signed-off-by: Su Hui <suhui@nfschina.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
__get_unaligned_cpu32() is deprecated. So, replace it with the more
generic get_unaligned() and just cast the input parameter.
Link: https://lkml.kernel.org/r/20250603132121.3674066-1-julian@outer-limits.org
Signed-off-by: Julian Vetter <julian@outer-limits.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Wei-Hsin Yeh <weihsinyeh168@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
|
|
Pull /proc/sys dcache lookup fix from Al Viro:
"Fix for the breakage spotted by Neil in the interplay between
/proc/sys ->d_compare() weirdness and parallel lookups"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fix proc_sys_compare() handling of in-lookup dentries
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Fix the calculation of the deadline server task's runtime as this
mishap was preventing realtime tasks from running
- Avoid a race condition during migrate-swapping two tasks
- Fix the string reported for the "none" dynamic preemption option
* tag 'sched_urgent_for_v6.16_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/deadline: Fix dl_server runtime calculation formula
sched/core: Fix migrate_swap() vs. hotplug
sched: Fix preemption string of preempt_dynamic_none
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fix from Borislav Petkov:
- Fix the compilation of an x86 kernel on a big engian machine due to a
missed endianness conversion
* tag 'objtool_urgent_for_v6.16_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Add missing endian conversion to read_annotate()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Revert uprobes to using CAP_SYS_ADMIN again as currently they can
destructively modify kernel code from an unprivileged process
- Move a warning to where it belongs
* tag 'perf_urgent_for_v6.16_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Revert to requiring CAP_SYS_ADMIN for uprobes
perf/core: Fix the WARN_ON_ONCE is out of lock protected region
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Borislav Petkov:
- Make sure AMD SEV guests using secure TSC, include a TSC_FACTOR which
prevents their TSCs from going skewed from the hypervisor's
* tag 'x86_urgent_for_v6.16_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev: Use TSC_FACTOR for Secure TSC frequency calculation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Borislav Petkov:
- Disable FUTEX_PRIVATE_HASH for this cycle due to a performance
regression
- Add a selftests compilation product to the corresponding .gitignore
file
* tag 'locking_urgent_for_v6.16_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftests/futex: Add futex_numa to .gitignore
futex: Temporary disable FUTEX_PRIVATE_HASH
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fix from Borislav Petkov:
- Initialize sysfs attributes properly to avoid lockdep complaining
about an uninitialized lock class
* tag 'edac_urgent_for_v6.16_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC: Initialize EDAC features sysfs attributes
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS fixes from Borislav Petkov:
- Do not remove the MCE sysfs hierarchy if thresholding sysfs nodes
init fails due to new/unknown banks present, which in itself is not
fatal anyway; add default names for new banks
- Make sure MCE polling settings are honored after CMCI storms
- Make sure MCE threshold limit is reset after the thresholding
interrupt has been serviced
- Clean up properly and disable CMCI banks on shutdown so that a
second/kexec-ed kernel can rediscover those banks again
* tag 'ras_urgent_for_v6.16_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Make sure CMCI banks are cleared during shutdown on Intel
x86/mce/amd: Fix threshold limit reset
x86/mce/amd: Add default names for MCA banks and blocks
x86/mce: Ensure user polling settings are honored when restarting timer
x86/mce: Don't remove sysfs if thresholding sysfs init fails
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Borislav Petkov:
- Have irq-msi-lib select CONFIG_GENERIC_MSI_IRQ explicitly as it uses
its facilities
* tag 'irq_urgent_for_v6.16_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/irq-msi-lib: Select CONFIG_GENERIC_MSI_IRQ
|
|
futex_numa was never added to the .gitignore file.
Add it.
Fixes: 9140f57c1c13 ("futex,selftests: Add another FUTEX2_NUMA selftest")
Signed-off-by: Terry Tritton <terry.tritton@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Link: https://lore.kernel.org/all/20250704103749.10341-1-terry.tritton@linaro.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- Memory corruption fixes in hid-appletb-kbd driver (Qasim Ijaz)
- New device ID in hid-elecom driver (Leonard Dizon)
- Fixed several HID debugfs contants (Vicki Pfau)
* tag 'hid-for-linus-2025070502' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: appletb-kbd: fix slab use-after-free bug in appletb_kbd_probe
HID: Fix debug name for BTN_GEAR_DOWN, BTN_GEAR_UP, BTN_WHEEL
HID: elecom: add support for ELECOM HUGE 019B variant
HID: appletb-kbd: fix memory corruption of input_handler_list
|
