summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-03-11drm/panel-lg-lg4573: Fix dotclockVille Syrjälä
The currently listed dotclock disagrees with the currently listed vrefresh rate. Change the dotclock to match the vrefresh. Someone tell me which (if either) of the dotclock or vreresh is correct? Cc: Heiko Schocher <hs@denx.de> Cc: Thierry Reding <treding@nvidia.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200302203452.17977-7-ville.syrjala@linux.intel.com Reviewed-by: Heiko Schocher <hs@denx.de>
2020-03-11drm/panel-ilitek-ili9322: Fix dotclocksVille Syrjälä
The listed dotclocks are two orders of mangnitude out. Fix them. v2: Just divide everything by 100 (Linus) Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Thierry Reding <treding@nvidia.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200309133809.32585-1-ville.syrjala@linux.intel.com Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2020-03-11drm/panel-novatek-nt35510: Fix dotclockVille Syrjälä
The dotclock is three orders of magnitude out. Fix it. v2: Just set it to 20MHz (Linus) Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200309133644.32385-1-ville.syrjala@linux.intel.com Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2020-03-11ftrace: Return the first found result in lookup_rec()Artem Savkov
It appears that ip ranges can overlap so. In that case lookup_rec() returns whatever results it got last even if it found nothing in last searched page. This breaks an obscure livepatch late module patching usecase: - load livepatch - load the patched module - unload livepatch - try to load livepatch again To fix this return from lookup_rec() as soon as it found the record containing searched-for ip. This used to be this way prior lookup_rec() introduction. Link: http://lkml.kernel.org/r/20200306174317.21699-1-asavkov@redhat.com Cc: stable@vger.kernel.org Fixes: 7e16f581a817 ("ftrace: Separate out functionality from ftrace_location_range()") Signed-off-by: Artem Savkov <asavkov@redhat.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-03-11drm: sysfs: Use scnprintf() for avoiding potential buffer overflowTakashi Iwai
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20200311073540.7108-1-tiwai@suse.de
2020-03-11bpf, sockmap: Remove bucket->lock from sock_{hash|map}_freeJohn Fastabend
The bucket->lock is not needed in the sock_hash_free and sock_map_free calls, in fact it is causing a splat due to being inside rcu block. | BUG: sleeping function called from invalid context at net/core/sock.c:2935 | in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 62, name: kworker/0:1 | 3 locks held by kworker/0:1/62: | #0: ffff88813b019748 ((wq_completion)events){+.+.}, at: process_one_work+0x1d7/0x5e0 | #1: ffffc900000abe50 ((work_completion)(&map->work)){+.+.}, at: process_one_work+0x1d7/0x5e0 | #2: ffff8881381f6df8 (&stab->lock){+...}, at: sock_map_free+0x26/0x180 | CPU: 0 PID: 62 Comm: kworker/0:1 Not tainted 5.5.0-04008-g7b083332376e #454 | Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-ppc64le-16.ppc.fedoraproject.org-3.fc31 04/01/2014 | Workqueue: events bpf_map_free_deferred | Call Trace: | dump_stack+0x71/0xa0 | ___might_sleep.cold+0xa6/0xb6 | lock_sock_nested+0x28/0x90 | sock_map_free+0x5f/0x180 | bpf_map_free_deferred+0x58/0x80 | process_one_work+0x260/0x5e0 | worker_thread+0x4d/0x3e0 | kthread+0x108/0x140 | ? process_one_work+0x5e0/0x5e0 | ? kthread_park+0x90/0x90 | ret_from_fork+0x3a/0x50 The reason we have stab->lock and bucket->locks in sockmap code is to handle checking EEXIST in update/delete cases. We need to be careful during an update operation that we check for EEXIST and we need to ensure that the psock object is not in some partial state of removal/insertion while we do this. So both map_update_common and sock_map_delete need to guard from being run together potentially deleting an entry we are checking, etc. But by the time we get to the tear-down code in sock_{ma[|hash}_free we have already disconnected the map and we just did synchronize_rcu() in the line above so no updates/deletes should be in flight. Because of this we can drop the bucket locks from the map free'ing code, noting no update/deletes can be in-flight. Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface") Reported-by: Jakub Sitnicki <jakub@cloudflare.com> Suggested-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/158385850787.30597.8346421465837046618.stgit@john-Precision-5820-Tower
2020-03-11drm/i915/gem: Mark up the racy read of the mmap_singletonChris Wilson
[11057.642683] BUG: KCSAN: data-race in i915_gem_mmap [i915] / singleton_release [i915] [11057.642717] [11057.642740] write (marked) to 0xffff8881f24471a0 of 8 bytes by task 44668 on cpu 2: [11057.643162] singleton_release+0x38/0x60 [i915] [11057.643192] __fput+0x160/0x3c0 [11057.643217] ____fput+0x16/0x20 [11057.643241] task_work_run+0xba/0x100 [11057.643263] exit_to_usermode_loop+0xe4/0xf0 [11057.643286] do_syscall_64+0x27e/0x2c0 [11057.643314] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [11057.643339] [11057.643359] read to 0xffff8881f24471a0 of 8 bytes by task 44667 on cpu 3: [11057.643774] i915_gem_mmap+0x295/0x670 [i915] [11057.643802] mmap_region+0x62b/0xac0 [11057.643825] do_mmap+0x414/0x6b0 [11057.643848] vm_mmap_pgoff+0xa9/0xf0 [11057.643875] ksys_mmap_pgoff+0x1ac/0x2f0 [11057.643900] do_syscall_64+0x6e/0x2c0 [11057.643924] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200311092624.10012-3-chris@chris-wilson.co.uk
2020-03-11drm/i915/execlists: Track active elements during dequeueChris Wilson
Record the initial active element we use when building the next ELSP submission, so that we can compare against it latter to see if there's no change. Fixes: 44d0a9c05bc0 ("drm/i915/execlists: Skip redundant resubmission") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200311092624.10012-2-chris@chris-wilson.co.uk
2020-03-11drm/i915/gt: Pull checking rps->pm_events under the irq_lockChris Wilson
Avoid angering kcsan by serialising the read of the pm_events with the write in rps_disable_interrupts. [ 6268.713419] BUG: KCSAN: data-race in intel_rps_park [i915] / rps_work [i915] [ 6268.713437] [ 6268.713449] write to 0xffff8881eda8efac of 4 bytes by task 1127 on cpu 3: [ 6268.713680] intel_rps_park+0x136/0x260 [i915] [ 6268.713905] __gt_park+0x61/0xa0 [i915] [ 6268.714128] ____intel_wakeref_put_last+0x42/0x90 [i915] [ 6268.714352] __intel_wakeref_put_work+0xd3/0xf0 [i915] [ 6268.714369] process_one_work+0x3b1/0x690 [ 6268.714384] worker_thread+0x80/0x670 [ 6268.714398] kthread+0x19a/0x1e0 [ 6268.714412] ret_from_fork+0x1f/0x30 [ 6268.714423] [ 6268.714435] read to 0xffff8881eda8efac of 4 bytes by task 950 on cpu 2: [ 6268.714664] rps_work+0xc2/0x680 [i915] [ 6268.714679] process_one_work+0x3b1/0x690 [ 6268.714693] worker_thread+0x80/0x670 [ 6268.714707] kthread+0x19a/0x1e0 [ 6268.714720] ret_from_fork+0x1f/0x30 v2: Mark all reads and writes of rpm->pm_events. The flow of enabling/disabling rps is stronly ordered, so the writes and interrupt generation are also strongly ordered -- just this may not be visible to the compiler, so provide annotations. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200311092624.10012-1-chris@chris-wilson.co.uk
2020-03-11drm/ttm: Use scnprintf() for avoiding potential buffer overflowTakashi Iwai
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/357174/ Signed-off-by: Christian König <christian.koenig@amd.com>
2020-03-11HID: hid-sensor-custom: Use scnprintf() for avoiding potential buffer overflowTakashi Iwai
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-03-11HID: hid-picolcd_fb: Use scnprintf() for avoiding potential buffer overflowTakashi Iwai
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-03-11drm/i915: Extend i915_request_await_active to use all timelinesChris Wilson
Extend i915_request_await_active() to be able to asynchronously wait on all the tracked timelines simultaneously. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200311092044.16353-1-chris@chris-wilson.co.uk
2020-03-11drm/i915/gt: Use scnprintf() for avoiding potential buffer overflowTakashi Iwai
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200311073256.6535-1-tiwai@suse.de
2020-03-11drm/i915/overlay: convert to drm_device based logging.Wambui Karuga
Convert various instances of the printk based drm logging macros to the struct drm_device based logging macros in i915/display/intel_overlay.c. This transformation was achieved using the following coccinelle script: @@ identifier fn, T; @@ fn(...,struct drm_i915_private *T,...) { <+... ( -DRM_INFO( +drm_info(&T->drm, ...) | -DRM_ERROR( +drm_err(&T->drm, ...) | -DRM_WARN( +drm_warn(&T->drm, ...) | -DRM_DEBUG( +drm_dbg(&T->drm, ...) | -DRM_DEBUG_DRIVER( +drm_dbg(&T->drm, ...) | -DRM_DEBUG_KMS( +drm_dbg_kms(&T->drm, ...) | -DRM_DEBUG_ATOMIC( +drm_dbg_atomic(&T->drm, ...) ) ...+> } @@ identifier fn, T; @@ fn(...) { ... struct drm_i915_private *T = ...; <+... ( -DRM_INFO( +drm_info(&T->drm, ...) | -DRM_ERROR( +drm_err(&T->drm, ...) | -DRM_WARN( +drm_warn(&T->drm, ...) | -DRM_DEBUG( +drm_dbg(&T->drm, ...) | -DRM_DEBUG_KMS( +drm_dbg_kms(&T->drm, ...) | -DRM_DEBUG_DRIVER( +drm_dbg(&T->drm, ...) | -DRM_DEBUG_ATOMIC( +drm_dbg_atomic(&T->drm, ...) ) ...+> } Note that this converts DRM_DEBUG to drm_dbg(). Checkpatch warnings were addressed manually. References: https://lists.freedesktop.org/archives/dri-devel/2020-January/253381.html Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ca3c14de13e308419caf33eb4bbf274f5387f1e0.1583766715.git.jani.nikula@intel.com
2020-03-11drm/i915/lvds: convert to drm_device based logging macros.Wambui Karuga
Converts various instances of the printk based drm logging macros to the struct drm_device based logging macros in i915/display/intel_lvds.c. This transformation was done by the following coccinelle script that matches based on the existence of a drm_i915_private device: @@ identifier fn, T; @@ fn(...,struct drm_i915_private *T,...) { <+... ( -DRM_INFO( +drm_info(&T->drm, ...) | -DRM_ERROR( +drm_err(&T->drm, ...) | -DRM_WARN( +drm_warn(&T->drm, ...) | -DRM_DEBUG( +drm_dbg(&T->drm, ...) | -DRM_DEBUG_DRIVER( +drm_dbg(&T->drm, ...) | -DRM_DEBUG_KMS( +drm_dbg_kms(&T->drm, ...) | -DRM_DEBUG_ATOMIC( +drm_dbg_atomic(&T->drm, ...) ) ...+> } @@ identifier fn, T; @@ fn(...) { ... struct drm_i915_private *T = ...; <+... ( -DRM_INFO( +drm_info(&T->drm, ...) | -DRM_ERROR( +drm_err(&T->drm, ...) | -DRM_WARN( +drm_warn(&T->drm, ...) | -DRM_DEBUG( +drm_dbg(&T->drm, ...) | -DRM_DEBUG_KMS( +drm_dbg_kms(&T->drm, ...) | -DRM_DEBUG_DRIVER( +drm_dbg(&T->drm, ...) | -DRM_DEBUG_ATOMIC( +drm_dbg_atomic(&T->drm, ...) ) ...+> } New checkpatch warnings were fixed manually. Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/e622ebd2ce07291f2db56174a0a0b31cc2df67df.1583766715.git.jani.nikula@intel.com
2020-03-11drm/i915/lpe_audio: convert to drm_device based logging macros.Wambui Karuga
Convert various uses of the printk based drm logging macros to the struct drm_device based logging macros in i915/display/intel_lpe_audio.c. Note that this converts DRM_DEBUG to drm_dbg(). References: https://lists.freedesktop.org/archives/dri-devel/2020-January/253381.html Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/98588d757a3729d7c8a4b1aaa0b5e7d160398b89.1583766715.git.jani.nikula@intel.com
2020-03-11drm/i915/hotplug: convert to drm_device based logging.Wambui Karuga
Converts various instances of the printk based drm logging macros to the struct drm_device based logging macros in i915/display/intel_hotplug.c. In some cases, this involves extracting the drm_i915_private pointer from the drm_device struct to be used in the logging macros. Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/3dfda89ab4a234f299ada77abd14163cef3f8bd4.1583766715.git.jani.nikula@intel.com
2020-03-11drm/i915/gmbus: convert to drm_device based logging,Wambui Karuga
Conversion instances of printk based drm logging macros to use the struct drm_device based logging macros in i915/display/intel_gmbus.c. This was done using the following coccinelle semantic patch that transforms based on the existence of an existing drm_i915_private device: @@ identifier fn, T; @@ fn(...,struct drm_i915_private *T,...) { <+... ( -DRM_INFO( +drm_info(&T->drm, ...) | -DRM_ERROR( +drm_err(&T->drm, ...) | -DRM_WARN( +drm_warn(&T->drm, ...) | -DRM_DEBUG( +drm_dbg(&T->drm, ...) | -DRM_DEBUG_DRIVER( +drm_dbg(&T->drm, ...) | -DRM_DEBUG_KMS( +drm_dbg_kms(&T->drm, ...) | -DRM_DEBUG_ATOMIC( +drm_dbg_atomic(&T->drm, ...) ) ...+> } @@ identifier fn, T; @@ fn(...) { ... struct drm_i915_private *T = ...; <+... ( -DRM_INFO( +drm_info(&T->drm, ...) | -DRM_ERROR( +drm_err(&T->drm, ...) | -DRM_WARN( +drm_warn(&T->drm, ...) | -DRM_DEBUG( +drm_dbg(&T->drm, ...) | -DRM_DEBUG_KMS( +drm_dbg_kms(&T->drm, ...) | -DRM_DEBUG_DRIVER( +drm_dbg(&T->drm, ...) | -DRM_DEBUG_ATOMIC( +drm_dbg_atomic(&T->drm, ...) ) ...+> } New checkpatch warnings were addressed manually. Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/5964ce0a603e2ec0e6110c927a11234e66891258.1583766715.git.jani.nikula@intel.com
2020-03-11drm/i915/fifo_underrun: convert to drm_device based logging.Wambui Karuga
Convert various instances of the printk based drm logging macros to the struct drm_device based logging macros in i915/display/intel_fifo_underrun.c. This was done using the following coccinelle script: @@ identifier fn, T; @@ fn(...,struct drm_i915_private *T,...) { <+... ( -DRM_INFO( +drm_info(&T->drm, ...) | -DRM_ERROR( +drm_err(&T->drm, ...) | -DRM_WARN( +drm_warn(&T->drm, ...) | -DRM_DEBUG( +drm_dbg(&T->drm, ...) | -DRM_DEBUG_DRIVER( +drm_dbg(&T->drm, ...) | -DRM_DEBUG_KMS( +drm_dbg_kms(&T->drm, ...) | -DRM_DEBUG_ATOMIC( +drm_dbg_atomic(&T->drm, ...) ) ...+> } @@ identifier fn, T; @@ fn(...) { ... struct drm_i915_private *T = ...; <+... ( -DRM_INFO( +drm_info(&T->drm, ...) | -DRM_ERROR( +drm_err(&T->drm, ...) | -DRM_WARN( +drm_warn(&T->drm, ...) | -DRM_DEBUG( +drm_dbg(&T->drm, ...) | -DRM_DEBUG_KMS( +drm_dbg_kms(&T->drm, ...) | -DRM_DEBUG_DRIVER( +drm_dbg(&T->drm, ...) | -DRM_DEBUG_ATOMIC( +drm_dbg_atomic(&T->drm, ...) ) ...+> } New checkpatch warnings were addressed manually. Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/3e8e74494c8aa662ab3fb4de1dac63fedef35c47.1583766715.git.jani.nikula@intel.com
2020-03-11drm/i915/dsb: convert to drm_device based logging macros.Wambui Karuga
This converts uses of the printk based drm logging macros to the struct drm_device logging macros in i915/display/intel_dsb.c. This was done using the following coccinelle script: @@ identifier fn, T; @@ fn(...,struct drm_i915_private *T,...) { <+... ( -DRM_INFO( +drm_info(&T->drm, ...) | -DRM_ERROR( +drm_err(&T->drm, ...) | -DRM_WARN( +drm_warn(&T->drm, ...) | -DRM_DEBUG( +drm_dbg(&T->drm, ...) | -DRM_DEBUG_DRIVER( +drm_dbg(&T->drm, ...) | -DRM_DEBUG_KMS( +drm_dbg_kms(&T->drm, ...) | -DRM_DEBUG_ATOMIC( +drm_dbg_atomic(&T->drm, ...) ) ...+> } @@ identifier fn, T; @@ fn(...) { ... struct drm_i915_private *T = ...; <+... ( -DRM_INFO( +drm_info(&T->drm, ...) | -DRM_ERROR( +drm_err(&T->drm, ...) | -DRM_WARN( +drm_warn(&T->drm, ...) | -DRM_DEBUG( +drm_dbg(&T->drm, ...) | -DRM_DEBUG_KMS( +drm_dbg_kms(&T->drm, ...) | -DRM_DEBUG_DRIVER( +drm_dbg(&T->drm, ...) | -DRM_DEBUG_ATOMIC( +drm_dbg_atomic(&T->drm, ...) ) ...+> } Checkpatch warnings were fixed manually. Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/f2e049c74146f5430ea95653a4f745224d36f960.1583766715.git.jani.nikula@intel.com
2020-03-11drm/ttm: fix false positive assertChristian König
The assert sometimes incorrectly triggers when pinned BOs are destroyed. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Tested-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com> Link: https://patchwork.freedesktop.org/patch/356737/
2020-03-11drm/i915: Remove debugfs i915_drpc_info and i915_forcewake_domainsTvrtko Ursulin
The two files have been duplicated under the gt/ subdir and since there are not apparent users looking for them at the old location lets simply remove them and duplicated code. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Andi Shyti <andi.shyti@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Andi Shyti <andi.shyti@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200310164733.26487-1-tvrtko.ursulin@linux.intel.com
2020-03-11MAINTAINERS: rectify the INTEL IADX DRIVER entryLukas Bulwahn
Commit bfe1d56091c1 ("dmaengine: idxd: Init and probe for Intel data accelerators") added the INTEL IADX DRIVER entry in MAINTAINERS, which mentions include/linux/idxd.h as file entry. However, this header file was not added in this commit, nor in any later one. Hence, since then, ./scripts/get_maintainer.pl --self-test complains: warning: no file matches F: include/linux/idxd.h Drop the file entry to the non-existing file in INTEL IADX DRIVER now. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Acked-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/20200307205737.5829-1-lukas.bulwahn@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-11dmaengine: move .device_release missing log warning to debug levelVinod Koul
Dmaengine core warns the drivers registering for missing .device_release implementation. The warning is accurate for dmaengine controllers which hotplug but not for rest. So reduce this to a debug log. Link: https://lore.kernel.org/r/20200306135018.2286959-1-vkoul@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-11drm/rockchip: rgb: don't count non-existent devices when determining subdriversHeiko Stuebner
rockchip_drm_endpoint_is_subdriver() may also return error codes. For example if the target-node is in the disabled state, so no platform-device is getting created for it. In that case current code would count that as external rgb device, which in turn would make probing the rockchip-drm device fail. So only count the target as rgb device if the function actually returns 0. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200121224828.4070067-1-heiko@sntech.de
2020-03-11ARM: dts: imx6: phycore-som: fix arm and soc minimum voltageMarco Felsch
The current set minimum voltage of 730000µV seems to be wrong. I don't know the document which specifies that but the imx6qdl datasheets says that the minimum voltage should be 0.925V for VDD_ARM (LDO bypassed, lowest opp) and 1.15V for VDD_SOC (LDO bypassed, lowest opp). Fixes: ddec5d1c0047 ("ARM: dts: imx6: Add initial support for phyCORE-i.MX 6 SOM") Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-03-11mac80211: Do not send mesh HWMP PREQ if HWMP is disabledNicolas Cavallari
When trying to transmit to an unknown destination, the mesh code would unconditionally transmit a HWMP PREQ even if HWMP is not the current path selection algorithm. Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr> Link: https://lore.kernel.org/r/20200305140409.12204-1-cavallar@lri.fr Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-03-11nl80211: add missing attribute validation for channel switchJakub Kicinski
Add missing attribute validation for NL80211_ATTR_OPER_CLASS to the netlink policy. Fixes: 1057d35ede5d ("cfg80211: introduce TDLS channel switch commands") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20200303051058.4089398-4-kuba@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-03-11nl80211: add missing attribute validation for beacon report scanningJakub Kicinski
Add missing attribute validation for beacon report scanning to the netlink policy. Fixes: 1d76250bd34a ("nl80211: support beacon report scanning") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20200303051058.4089398-3-kuba@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-03-11nl80211: add missing attribute validation for critical protocol indicationJakub Kicinski
Add missing attribute validation for critical protocol fields to the netlink policy. Fixes: 5de17984898c ("cfg80211: introduce critical protocol indication from user-space") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20200303051058.4089398-2-kuba@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-03-11KVM: s390: Also reset registers in sync regs for initial cpu resetChristian Borntraeger
When we do the initial CPU reset we must not only clear the registers in the internal data structures but also in kvm_run sync_regs. For modern userspace sync_regs is the only place that it looks at. Fixes: 7de3f1423ff9 ("KVM: s390: Add new reset vcpu API") Acked-by: David Hildenbrand <david@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2020-03-11staging: wfx: fix RCU usage between hif_join() and ieee80211_bss_get_ie()Jérôme Pouiller
Access to result of ieee80211_bss_get_ie() is protected by RCU. In other hand, function hif_join() can sleep and cannot be called with RCU locked. Provide a copy of "ssidie" to hif_join() to solve this behavior. Fixes: 9ced9b593741 ("staging: wfx: simplify hif_join()") Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20200310101356.182818-6-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-11staging: wfx: fix RCU usage in wfx_join_finalize()Jérôme Pouiller
Access to sta->ht_cap is protected by RCU. However, hif_set_association_mode() may sleep, so it can't be called in RCU. This patch fix this behavior by handling sta and its RCU directly from function hif_set_association_mode(). Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Fixes: d00149011066 ("staging: wfx: fix RCU usage") Link: https://lore.kernel.org/r/20200310101356.182818-5-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-11staging: wfx: make warning about pending frame less scaryJérôme Pouiller
Removing station while some traffic is in progress may happen. Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20200310101356.182818-4-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-11staging: wfx: fix lines ending with a comma instead of a semicolonJérôme Pouiller
Obviously introduced by mistake. Fixes: 09779276f1ba ("staging: wfx: simplify hif_start() usage") Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20200310101356.182818-3-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-11staging: wfx: fix warning about freeing in-use mutex during device unregisterJérôme Pouiller
After hif_shutdown(), communication with the chip is no more possible. It the only request that never reply. Therefore, hif_cmd.lock is never unlocked. hif_shutdown() unlock itself hif_cmd.lock to avoid a potential warning during disposal of device. hif_cmd.key_renew_lock should also been unlocked for the same reason. Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20200310101356.182818-2-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-11staging/speakup: fix get_word non-space look-aheadSamuel Thibault
get_char was erroneously given the address of the pointer to the text instead of the address of the text, thus leading to random crashes when the user requests speaking a word while the current position is on a space character and say_word_ctl is not enabled. Reported-on: https://github.com/bytefire/speakup/issues/1 Reported-by: Kirk Reiser <kirk@reisers.ca> Reported-by: Janina Sajka <janina@rednote.net> Reported-by: Alexandr Epaneshnikov <aarnaarn2@gmail.com> Reported-by: Gregory Nowak <greg@gregn.net> Reported-by: deedra waters <deedra@the-brannons.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Tested-by: Alexandr Epaneshnikov <aarnaarn2@gmail.com> Tested-by: Gregory Nowak <greg@gregn.net> Tested-by: Michael Taboada <michael@michaels.world> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200306003047.thijtmqrnayd3dmw@function Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-11ALSA: hda/realtek: Fix pop noise on ALC225Kai-Heng Feng
Commit 317d9313925c ("ALSA: hda/realtek - Set default power save node to 0") makes the ALC225 have pop noise on S3 resume and cold boot. So partially revert this commit for ALC225 to fix the regression. Fixes: 317d9313925c ("ALSA: hda/realtek - Set default power save node to 0") BugLink: https://bugs.launchpad.net/bugs/1866357 Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Link: https://lore.kernel.org/r/20200311061328.17614-1-kai.heng.feng@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-03-10scsi: ipr: Fix softlockup when rescanning devices in petitbootWen Xiong
When trying to rescan disks in petitboot shell, we hit the following softlockup stacktrace: Kernel panic - not syncing: System is deadlocked on memory [ 241.223394] CPU: 32 PID: 693 Comm: sh Not tainted 5.4.16-openpower1 #1 [ 241.223406] Call Trace: [ 241.223415] [c0000003f07c3180] [c000000000493fc4] dump_stack+0xa4/0xd8 (unreliable) [ 241.223432] [c0000003f07c31c0] [c00000000007d4ac] panic+0x148/0x3cc [ 241.223446] [c0000003f07c3260] [c000000000114b10] out_of_memory+0x468/0x4c4 [ 241.223461] [c0000003f07c3300] [c0000000001472b0] __alloc_pages_slowpath+0x594/0x6d8 [ 241.223476] [c0000003f07c3420] [c00000000014757c] __alloc_pages_nodemask+0x188/0x1a4 [ 241.223492] [c0000003f07c34a0] [c000000000153e10] alloc_pages_current+0xcc/0xd8 [ 241.223508] [c0000003f07c34e0] [c0000000001577ac] alloc_slab_page+0x30/0x98 [ 241.223524] [c0000003f07c3520] [c0000000001597fc] new_slab+0x138/0x40c [ 241.223538] [c0000003f07c35f0] [c00000000015b204] ___slab_alloc+0x1e4/0x404 [ 241.223552] [c0000003f07c36c0] [c00000000015b450] __slab_alloc+0x2c/0x48 [ 241.223566] [c0000003f07c36f0] [c00000000015b754] kmem_cache_alloc_node+0x9c/0x1b4 [ 241.223582] [c0000003f07c3760] [c000000000218c48] blk_alloc_queue_node+0x34/0x270 [ 241.223599] [c0000003f07c37b0] [c000000000226574] blk_mq_init_queue+0x2c/0x78 [ 241.223615] [c0000003f07c37e0] [c0000000002ff710] scsi_mq_alloc_queue+0x28/0x70 [ 241.223631] [c0000003f07c3810] [c0000000003005b8] scsi_alloc_sdev+0x184/0x264 [ 241.223647] [c0000003f07c38a0] [c000000000300ba0] scsi_probe_and_add_lun+0x288/0xa3c [ 241.223663] [c0000003f07c3a00] [c000000000301768] __scsi_scan_target+0xcc/0x478 [ 241.223679] [c0000003f07c3b20] [c000000000301c64] scsi_scan_channel.part.9+0x74/0x7c [ 241.223696] [c0000003f07c3b70] [c000000000301df4] scsi_scan_host_selected+0xe0/0x158 [ 241.223712] [c0000003f07c3bd0] [c000000000303f04] store_scan+0x104/0x114 [ 241.223727] [c0000003f07c3cb0] [c0000000002d5ac4] dev_attr_store+0x30/0x4c [ 241.223741] [c0000003f07c3cd0] [c0000000001dbc34] sysfs_kf_write+0x64/0x78 [ 241.223756] [c0000003f07c3cf0] [c0000000001da858] kernfs_fop_write+0x170/0x1b8 [ 241.223773] [c0000003f07c3d40] [c0000000001621fc] __vfs_write+0x34/0x60 [ 241.223787] [c0000003f07c3d60] [c000000000163c2c] vfs_write+0xa8/0xcc [ 241.223802] [c0000003f07c3db0] [c000000000163df4] ksys_write+0x70/0xbc [ 241.223816] [c0000003f07c3e20] [c00000000000b40c] system_call+0x5c/0x68 As a part of the scan process Linux will allocate and configure a scsi_device for each target to be scanned. If the device is not present, then the scsi_device is torn down. As a part of scsi_device teardown a workqueue item will be scheduled and the lockups we see are because there are 250k workqueue items to be processed. Accoding to the specification of SIS-64 sas controller, max_channel should be decreased on SIS-64 adapters to 4. The patch fixes softlockup issue. Thanks for Oliver Halloran's help with debugging and explanation! Link: https://lore.kernel.org/r/1583510248-23672-1-git-send-email-wenxiong@linux.vnet.ibm.com Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-10drm/i915/execlists: Mark up data-races in virtual enginesChris Wilson
The virtual engine passes tokens back and forth to its backing physical engines. [ 57.372993] BUG: KCSAN: data-race in execlists_dequeue [i915] / virtual_submission_tasklet [i915] [ 57.373012] [ 57.373023] write to 0xffff8881f47324c0 of 4 bytes by interrupt on cpu 2: [ 57.373241] execlists_dequeue+0x6fa/0x2150 [i915] [ 57.373458] __execlists_submission_tasklet+0x48/0x60 [i915] [ 57.373677] execlists_submission_tasklet+0xd3/0x170 [i915] [ 57.373694] tasklet_action_common.isra.0+0x42/0xa0 [ 57.373709] __do_softirq+0xd7/0x2cd [ 57.373723] irq_exit+0xbe/0xe0 [ 57.373735] do_IRQ+0x51/0x100 [ 57.373748] ret_from_intr+0x0/0x1c [ 57.373963] engine_retire+0x89/0xe0 [i915] [ 57.373977] process_one_work+0x3b1/0x690 [ 57.373990] worker_thread+0x80/0x670 [ 57.374004] kthread+0x19a/0x1e0 [ 57.374017] ret_from_fork+0x1f/0x30 [ 57.374027] [ 57.374038] read to 0xffff8881f47324c0 of 4 bytes by interrupt on cpu 3: [ 57.374256] virtual_submission_tasklet+0x27/0x5a0 [i915] [ 57.374273] tasklet_action_common.isra.0+0x42/0xa0 [ 57.374288] __do_softirq+0xd7/0x2cd [ 57.374302] run_ksoftirqd+0x15/0x20 [ 57.374315] smpboot_thread_fn+0x1ab/0x300 [ 57.374329] kthread+0x19a/0x1e0 [ 57.374342] ret_from_fork+0x1f/0x30 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200310141320.24149-3-chris@chris-wilson.co.uk
2020-03-10drm/i915: Mark up racy read of active rq->engineChris Wilson
As a virtual engine may change the rq->engine to point to the active request in flight, we need to warn the compiler that an active request's engine is volatile. [ 95.017686] write (marked) to 0xffff8881e8386b10 of 8 bytes by interrupt on cpu 2: [ 95.018123] execlists_dequeue+0x762/0x2150 [i915] [ 95.018539] __execlists_submission_tasklet+0x48/0x60 [i915] [ 95.018955] execlists_submission_tasklet+0xd3/0x170 [i915] [ 95.018986] tasklet_action_common.isra.0+0x42/0xa0 [ 95.019016] __do_softirq+0xd7/0x2cd [ 95.019043] irq_exit+0xbe/0xe0 [ 95.019068] irq_work_interrupt+0xf/0x20 [ 95.019491] i915_request_retire+0x2c5/0x670 [i915] [ 95.019937] retire_requests+0xa1/0xf0 [i915] [ 95.020348] engine_retire+0xa1/0xe0 [i915] [ 95.020376] process_one_work+0x3b1/0x690 [ 95.020403] worker_thread+0x80/0x670 [ 95.020429] kthread+0x19a/0x1e0 [ 95.020454] ret_from_fork+0x1f/0x30 [ 95.020476] [ 95.020498] read to 0xffff8881e8386b10 of 8 bytes by task 8909 on cpu 3: [ 95.020918] __i915_request_commit+0x177/0x220 [i915] [ 95.021329] i915_gem_do_execbuffer+0x38c4/0x4e50 [i915] [ 95.021750] i915_gem_execbuffer2_ioctl+0x2c3/0x580 [i915] [ 95.021784] drm_ioctl_kernel+0xe4/0x120 [ 95.021809] drm_ioctl+0x297/0x4c7 [ 95.021832] ksys_ioctl+0x89/0xb0 [ 95.021865] __x64_sys_ioctl+0x42/0x60 [ 95.021901] do_syscall_64+0x6e/0x2c0 [ 95.021927] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200310142403.5953-1-chris@chris-wilson.co.uk
2020-03-10drm/i915/gt: Mark up racy reads for intel_context.inflightChris Wilson
When being used across multiple real engines inside a virtual engine, the intel_context.inflight is updated atomically, and so we must annotate the racy read from outside the owning context. [11142.482846] BUG: KCSAN: data-race in __execlists_submission_tasklet [i915] / __execlists_submission_tasklet [i915] [11142.482867] [11142.482878] write (marked) to 0xffff8881f257b5e0 of 8 bytes by interrupt on cpu 2: [11142.483107] __execlists_submission_tasklet+0x1d33/0x2120 [i915] [11142.483336] execlists_submission_tasklet+0xd3/0x170 [i915] [11142.483355] tasklet_action_common.isra.0+0x42/0xa0 [11142.483371] __do_softirq+0xd7/0x2cd [11142.483384] irq_exit+0xbe/0xe0 [11142.483401] do_IRQ+0x51/0x100 [11142.483424] ret_from_intr+0x0/0x1c [11142.483446] do_idle+0x133/0x1f0 [11142.483465] cpu_startup_entry+0x14/0x16 [11142.483483] start_secondary+0x120/0x180 [11142.483498] secondary_startup_64+0xa4/0xb0 [11142.483512] [11142.483528] read to 0xffff8881f257b5e0 of 8 bytes by interrupt on cpu 1: [11142.483755] __execlists_submission_tasklet+0x14e/0x2120 [i915] [11142.483981] execlists_submission_tasklet+0xd3/0x170 [i915] [11142.483999] tasklet_action_common.isra.0+0x42/0xa0 [11142.484014] __do_softirq+0xd7/0x2cd [11142.484028] do_softirq_own_stack+0x2a/0x40 [11142.484046] do_softirq.part.0+0x26/0x30 [11142.484071] __local_bh_enable_ip+0x46/0x50 [11142.484299] i915_gem_do_execbuffer+0x39c1/0x4e50 [i915] [11142.484528] i915_gem_execbuffer2_ioctl+0x2c3/0x580 [i915] [11142.484546] drm_ioctl_kernel+0xe4/0x120 [11142.484559] drm_ioctl+0x297/0x4c7 [11142.484572] ksys_ioctl+0x89/0xb0 [11142.484586] __x64_sys_ioctl+0x42/0x60 [11142.484610] do_syscall_64+0x6e/0x2c0 [11142.484627] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200310141320.24149-1-chris@chris-wilson.co.uk
2020-03-10drm/i915: Tweak scheduler's kick_submission()Chris Wilson
Skip useless priority bumping on adding a new dependency by making sure that we do update the priority if we would have rescheduled the active cotnext. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200310115947.6482-1-chris@chris-wilson.co.uk
2020-03-10drm/i915: Defer semaphore priority bumping to a workqueueChris Wilson
Since the semaphore fence may be signaled from inside an interrupt handler from inside a request holding its request->lock, we cannot then enter into the engine->active.lock for processing the semaphore priority bump as we may traverse our call tree and end up on another held request. CPU 0: [ 2243.218864] _raw_spin_lock_irqsave+0x9a/0xb0 [ 2243.218867] i915_schedule_bump_priority+0x49/0x80 [i915] [ 2243.218869] semaphore_notify+0x6d/0x98 [i915] [ 2243.218871] __i915_sw_fence_complete+0x61/0x420 [i915] [ 2243.218874] ? kmem_cache_free+0x211/0x290 [ 2243.218876] i915_sw_fence_complete+0x58/0x80 [i915] [ 2243.218879] dma_i915_sw_fence_wake+0x3e/0x80 [i915] [ 2243.218881] signal_irq_work+0x571/0x690 [i915] [ 2243.218883] irq_work_run_list+0xd7/0x120 [ 2243.218885] irq_work_run+0x1d/0x50 [ 2243.218887] smp_irq_work_interrupt+0x21/0x30 [ 2243.218889] irq_work_interrupt+0xf/0x20 CPU 1: [ 2242.173107] _raw_spin_lock+0x8f/0xa0 [ 2242.173110] __i915_request_submit+0x64/0x4a0 [i915] [ 2242.173112] __execlists_submission_tasklet+0x8ee/0x2120 [i915] [ 2242.173114] ? i915_sched_lookup_priolist+0x1e3/0x2b0 [i915] [ 2242.173117] execlists_submit_request+0x2e8/0x2f0 [i915] [ 2242.173119] submit_notify+0x8f/0xc0 [i915] [ 2242.173121] __i915_sw_fence_complete+0x61/0x420 [i915] [ 2242.173124] ? _raw_spin_unlock_irqrestore+0x39/0x40 [ 2242.173137] i915_sw_fence_complete+0x58/0x80 [i915] [ 2242.173140] i915_sw_fence_commit+0x16/0x20 [i915] Closes: https://gitlab.freedesktop.org/drm/intel/issues/1318 Fixes: b7404c7ecb38 ("drm/i915: Bump ready tasks ahead of busywaits") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: <stable@vger.kernel.org> # v5.2+ Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200310101720.9944-1-chris@chris-wilson.co.uk
2020-03-10Merge branch 's390-qeth-fixes'David S. Miller
Julian Wiedmann says: ==================== s390/qeth: fixes 2020-03-10 This fixes three minor issues: 1) a setup parameter gets cleared unnecessarily when the HW config changes, 2) insufficient error handling when initially filling the RX ring, and 3) a rarely used worker that needs to be cancelled during tear down. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10s390/qeth: cancel RX reclaim work earlierJulian Wiedmann
When qeth's napi poll code fails to refill an entirely empty RX ring, it kicks off buffer_reclaim_work to try again later. Make sure that this worker is cancelled when setting the qeth device offline. Otherwise a RX refill action can unexpectedly end up running concurrently to bigger re-configurations (eg. resizing the buffer pool), without any locking. Fixes: b333293058aa ("qeth: add support for af_iucv HiperSockets transport") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10s390/qeth: handle error when backing RX bufferJulian Wiedmann
qeth_init_qdio_queues() fills the RX ring with an initial set of RX buffers. If qeth_init_input_buffer() fails to back one of the RX buffers with memory, we need to bail out and report the error. Fixes: 4a71df50047f ("qeth: new qeth device driver") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10s390/qeth: don't reset default_out_queueJulian Wiedmann
When an OSA device in prio-queue setup is reduced to 1 TX queue due to HW restrictions, we reset its the default_out_queue to 0. In the old code this was needed so that qeth_get_priority_queue() gets the queue selection right. But with proper multiqueue support we already reduced dev->real_num_tx_queues to 1, and so the stack puts all traffic on txq 0 without even calling .ndo_select_queue. Thus we can preserve the user's configuration, and apply it if the OSA device later re-gains support for multiple TX queues. Fixes: 73dc2daf110f ("s390/qeth: add TX multiqueue support for OSA devices") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10scsi: ufs: Fix possible unclocked access to auto hibern8 timer registerCan Guo
Before access auto hibner8 timer register, make sure power and clock are properly configured to avoid unclocked register access. Link: https://lore.kernel.org/r/1583398391-14273-1-git-send-email-cang@codeaurora.org Fixes: ba7af5ec5126 ("scsi: ufs: export ufshcd_auto_hibern8_update for vendor usage") Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Can Guo <cang@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit (git 2.34.1) at 2025-09-24 14:21:24 +0000