| Age | Commit message (Collapse) | Author |
|---|
|
If allocation of the 'imu' fails, then the existing pages aren't
unpinned in the error path. This is mostly a theoretical issue,
requiring fault injection to hit.
Move unpin_user_pages() to unified error handling to fix the page leak
issue.
Fixes: d8c2237d0aa9 ("io_uring: add io_pin_pages() helper")
Signed-off-by: Penglei Jiang <superman.xpt@gmail.com>
Link: https://lore.kernel.org/r/20250617165644.79165-1-superman.xpt@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
A recent commit moved the error handling of sqpoll thread and tctx
failures into the thread itself, as part of fixing an issue. However, it
missed that tctx allocation may also fail, and that
io_sq_offload_create() does its own error handling for the task_struct
in that case.
Remove the manual task putting in io_sq_offload_create(), as
io_sq_thread() will notice that the tctx did not get setup and hence it
should put itself and exit.
Reported-by: syzbot+763e12bbf004fb1062e4@syzkaller.appspotmail.com
Fixes: ac0b8b327a56 ("io_uring: fix use-after-free of sq->thread in __io_uring_show_fdinfo()")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This function exists in both tctx.h (where it belongs) and in io_uring.h
as a remnant of before the tctx handling code got split out. Remove the
io_uring.h definition and ensure that sqpoll.c includes the tctx.h
header to get the definition.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add missing put_task_struct() in the error path
Cc: stable@vger.kernel.org
Fixes: 0f8baa3c9802 ("io-wq: fully initialize wqe before calling cpuhp_state_add_instance_nocalls()")
Signed-off-by: Penglei Jiang <superman.xpt@gmail.com>
Link: https://lore.kernel.org/r/20250615163906.2367-1-superman.xpt@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
syzbot reports that it can trigger a WARN_ON() for kmalloc() attempt
that's too big:
WARNING: CPU: 0 PID: 6488 at mm/slub.c:5024 __kvmalloc_node_noprof+0x520/0x640 mm/slub.c:5024
Modules linked in:
CPU: 0 UID: 0 PID: 6488 Comm: syz-executor312 Not tainted 6.15.0-rc7-syzkaller-gd7fa1af5b33e #0 PREEMPT
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025
pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __kvmalloc_node_noprof+0x520/0x640 mm/slub.c:5024
lr : __do_kmalloc_node mm/slub.c:-1 [inline]
lr : __kvmalloc_node_noprof+0x3b4/0x640 mm/slub.c:5012
sp : ffff80009cfd7a90
x29: ffff80009cfd7ac0 x28: ffff0000dd52a120 x27: 0000000000412dc0
x26: 0000000000000178 x25: ffff7000139faf70 x24: 0000000000000000
x23: ffff800082f4cea8 x22: 00000000ffffffff x21: 000000010cd004a8
x20: ffff0000d75816c0 x19: ffff0000dd52a000 x18: 00000000ffffffff
x17: ffff800092f39000 x16: ffff80008adbe9e4 x15: 0000000000000005
x14: 1ffff000139faf1c x13: 0000000000000000 x12: 0000000000000000
x11: ffff7000139faf21 x10: 0000000000000003 x9 : ffff80008f27b938
x8 : 0000000000000002 x7 : 0000000000000000 x6 : 0000000000000000
x5 : 00000000ffffffff x4 : 0000000000400dc0 x3 : 0000000200000000
x2 : 000000010cd004a8 x1 : ffff80008b3ebc40 x0 : 0000000000000001
Call trace:
__kvmalloc_node_noprof+0x520/0x640 mm/slub.c:5024 (P)
kvmalloc_array_node_noprof include/linux/slab.h:1065 [inline]
io_rsrc_data_alloc io_uring/rsrc.c:206 [inline]
io_clone_buffers io_uring/rsrc.c:1178 [inline]
io_register_clone_buffers+0x484/0xa14 io_uring/rsrc.c:1287
__io_uring_register io_uring/register.c:815 [inline]
__do_sys_io_uring_register io_uring/register.c:926 [inline]
__se_sys_io_uring_register io_uring/register.c:903 [inline]
__arm64_sys_io_uring_register+0x42c/0xea8 io_uring/register.c:903
__invoke_syscall arch/arm64/kernel/syscall.c:35 [inline]
invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49
el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132
do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151
el0_svc+0x58/0x17c arch/arm64/kernel/entry-common.c:767
el0t_64_sync_handler+0x78/0x108 arch/arm64/kernel/entry-common.c:786
el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:600
which is due to offset + buffer_count being too large. The registration
code checks only the total count of buffers, but given that the indexing
is an array, it should also check offset + count. That can't exceed
IORING_MAX_REG_BUFFERS either, as there's no way to reach buffers beyond
that limit.
There's no issue with registrering a table this large, outside of the
fact that it's pointless to register buffers that cannot be reached, and
that it can trigger this kmalloc() warning for attempting an allocation
that is too large.
Cc: stable@vger.kernel.org
Fixes: b16e920a1909 ("io_uring/rsrc: allow cloning at an offset")
Reported-by: syzbot+cb4bf3cb653be0d25de8@syzkaller.appspotmail.com
Link: https://lore.kernel.org/io-uring/684e77bd.a00a0220.279073.0029.GAE@google.com/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In preparation for needing to shift NVMe passthrough to always use
task_work for polled IO completions, ensure that those are suitably
run at exit time. See commit:
9ce6c9875f3e ("nvme: always punt polled uring_cmd end_io work to task_work")
for details on why that is necessary.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If peeking a bunch of buffers, normally io_ring_buffers_peek() will
truncate the end buffer. This isn't optimal as presumably more data will
be arriving later, and hence it's better to stop with the last full
buffer rather than truncate the end buffer.
Cc: stable@vger.kernel.org
Fixes: 35c8711c8fc4 ("io_uring/kbuf: add helpers for getting/peeking multiple buffers")
Reported-by: Christian Mazakas <christian.mazakas@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The sqpoll thread is dereferenced with rcu read protection in one place,
so it needs to be annotated as an __rcu type, and should consistently
use rcu helpers for access and assignment to make sparse happy.
Since most of the accesses occur under the sqd->lock, we can use
rcu_dereference_protected() without declaring an rcu read section.
Provide a simple helper to get the thread from a locked context.
Fixes: ac0b8b327a5677d ("io_uring: fix use-after-free of sq->thread in __io_uring_show_fdinfo()")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20250611205343.1821117-1-kbusch@meta.com
[axboe: fold in fix for register.c]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
syzbot reports:
BUG: KASAN: slab-use-after-free in getrusage+0x1109/0x1a60
Read of size 8 at addr ffff88810de2d2c8 by task a.out/304
CPU: 0 UID: 0 PID: 304 Comm: a.out Not tainted 6.16.0-rc1 #1 PREEMPT(voluntary)
Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x53/0x70
print_report+0xd0/0x670
? __pfx__raw_spin_lock_irqsave+0x10/0x10
? getrusage+0x1109/0x1a60
kasan_report+0xce/0x100
? getrusage+0x1109/0x1a60
getrusage+0x1109/0x1a60
? __pfx_getrusage+0x10/0x10
__io_uring_show_fdinfo+0x9fe/0x1790
? ksys_read+0xf7/0x1c0
? do_syscall_64+0xa4/0x260
? vsnprintf+0x591/0x1100
? __pfx___io_uring_show_fdinfo+0x10/0x10
? __pfx_vsnprintf+0x10/0x10
? mutex_trylock+0xcf/0x130
? __pfx_mutex_trylock+0x10/0x10
? __pfx_show_fd_locks+0x10/0x10
? io_uring_show_fdinfo+0x57/0x80
io_uring_show_fdinfo+0x57/0x80
seq_show+0x38c/0x690
seq_read_iter+0x3f7/0x1180
? inode_set_ctime_current+0x160/0x4b0
seq_read+0x271/0x3e0
? __pfx_seq_read+0x10/0x10
? __pfx__raw_spin_lock+0x10/0x10
? __mark_inode_dirty+0x402/0x810
? selinux_file_permission+0x368/0x500
? file_update_time+0x10f/0x160
vfs_read+0x177/0xa40
? __pfx___handle_mm_fault+0x10/0x10
? __pfx_vfs_read+0x10/0x10
? mutex_lock+0x81/0xe0
? __pfx_mutex_lock+0x10/0x10
? fdget_pos+0x24d/0x4b0
ksys_read+0xf7/0x1c0
? __pfx_ksys_read+0x10/0x10
? do_user_addr_fault+0x43b/0x9c0
do_syscall_64+0xa4/0x260
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f0f74170fc9
Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 8
RSP: 002b:00007fffece049e8 EFLAGS: 00000206 ORIG_RAX: 0000000000000000
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f0f74170fc9
RDX: 0000000000001000 RSI: 00007fffece049f0 RDI: 0000000000000004
RBP: 00007fffece05ad0 R08: 0000000000000000 R09: 00007fffece04d90
R10: 0000000000000000 R11: 0000000000000206 R12: 00005651720a1100
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
</TASK>
Allocated by task 298:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
__kasan_slab_alloc+0x6e/0x70
kmem_cache_alloc_node_noprof+0xe8/0x330
copy_process+0x376/0x5e00
create_io_thread+0xab/0xf0
io_sq_offload_create+0x9ed/0xf20
io_uring_setup+0x12b0/0x1cc0
do_syscall_64+0xa4/0x260
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 22:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x37/0x50
kmem_cache_free+0xc4/0x360
rcu_core+0x5ff/0x19f0
handle_softirqs+0x18c/0x530
run_ksoftirqd+0x20/0x30
smpboot_thread_fn+0x287/0x6c0
kthread+0x30d/0x630
ret_from_fork+0xef/0x1a0
ret_from_fork_asm+0x1a/0x30
Last potentially related work creation:
kasan_save_stack+0x33/0x60
kasan_record_aux_stack+0x8c/0xa0
__call_rcu_common.constprop.0+0x68/0x940
__schedule+0xff2/0x2930
__cond_resched+0x4c/0x80
mutex_lock+0x5c/0xe0
io_uring_del_tctx_node+0xe1/0x2b0
io_uring_clean_tctx+0xb7/0x160
io_uring_cancel_generic+0x34e/0x760
do_exit+0x240/0x2350
do_group_exit+0xab/0x220
__x64_sys_exit_group+0x39/0x40
x64_sys_call+0x1243/0x1840
do_syscall_64+0xa4/0x260
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The buggy address belongs to the object at ffff88810de2cb00
which belongs to the cache task_struct of size 3712
The buggy address is located 1992 bytes inside of
freed 3712-byte region [ffff88810de2cb00, ffff88810de2d980)
which is caused by the task_struct pointed to by sq->thread being
released while it is being used in the function
__io_uring_show_fdinfo(). Holding ctx->uring_lock does not prevent ehre
relase or exit of sq->thread.
Fix this by assigning and looking up ->thread under RCU, and grabbing a
reference to the task_struct. This ensures that it cannot get released
while fdinfo is using it.
Reported-by: syzbot+531502bbbe51d2f769f4@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/682b06a5.a70a0220.3849cf.00b3.GAE@google.com
Fixes: 3fcb9d17206e ("io_uring/sqpoll: statistics of the true utilization of sq threads")
Signed-off-by: Penglei Jiang <superman.xpt@gmail.com>
Link: https://lore.kernel.org/r/20250610171801.70960-1-superman.xpt@gmail.com
[axboe: massage commit message]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Inflight marking is used so that do_exit() -> io_uring_files_cancel()
will find requests with files that reference an io_uring instance,
so they can get appropriately canceled before the files go away.
However, it's also called before the mm goes away.
Mark futex/futexv wait requests as being inflight, so that
io_uring_files_cancel() will prune them. This ensures that the mm stays
alive, which is important as an exiting mm will also free the futex
private hash buckets. An io_uring futex request with FUTEX2_PRIVATE
set relies on those being alive until the request has completed. A
recent commit added these futex private hashes, which get killed when
the mm goes away.
Fixes: 80367ad01d93 ("futex: Add basic infrastructure for local task local hash")
Link: https://lore.kernel.org/io-uring/38053.1749045482@localhost/
Reported-by: Robert Morris <rtm@csail.mit.edu>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Rather than use a union of a u32 and struct futex_waitv user address,
consolidate it into a single void __user pointer instead. This also
makes prep easier to use as the store happens to the member that will
be used.
No functional changes in this patch.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The buffer ID for a provided buffer is an unsigned short, and hence
there can only be 64k added to any given buffer list before having
duplicate BIDs. Cap the legacy provided buffers at 64k in the list.
This is mostly to prevent silly stall reports from syzbot, which
likes to dump tons of buffers into a list and then have kernels with
lockdep and kasan churning through them and hitting long wait times
for buffer pruning at ring exit time.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Disassociate my name from the project over disagreements on development
practices.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/814ec73b73323a8e1c87643d193a73f467fb191f.1748034476.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently retry and general validity of msg_inq is gated on it being
larger than zero, but it's entirely possible for this to be slightly
inaccurate. In particular, if FIN is received, it'll return 1.
Just use larger than 1 as the check. This covers both the FIN case, and
at the same time, it doesn't make much sense to retry a recv immediately
if there's even just a single 1 byte of valid data in the socket.
Leave the SOCK_NONEMPTY flagging when larger than 0 still, as an app may
use that for the final receive.
Cc: stable@vger.kernel.org
Reported-by: Christian Mazakas <christian.mazakas@gmail.com>
Fixes: 7c71a0af81ba ("io_uring/net: improve recv bundles")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
On area registration failure there might be no ifq set and it's not safe
to access area->ifq in the release path without checking it first.
Cc: stable@vger.kernel.org
Fixes: f12ecf5e1c5ec ("io_uring/zcrx: fix late dma unmap for a dead dev")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/bc02878678a5fec28bc77d33355cdba735418484.1748365640.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
xa_find() interprets id as the lower bound and thus expects it initialised.
Reported-by: syzbot+c3ff04150c30d3df0f57@syzkaller.appspotmail.com
Fixes: 76f1cc98b23ce ("io_uring/zcrx: add support for multiple ifqs")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/faea44ef63131e6968f635e1b6b7ca6056f1f533.1748359655.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull MSI updates from Thomas Gleixner:
"Updates for the MSI subsystem (core code and PCI):
- Switch the MSI descriptor locking to lock guards
- Replace a broken and naive implementation of PCI/MSI-X control word
updates in the PCI/TPH driver with a properly serialized variant in
the PCI/MSI core code.
- Remove the MSI descriptor abuse in the SCCI/UFS/QCOM driver by
replacing the direct access to the MSI descriptors with the proper
API function calls. People will never understand that APIs exist
for a reason...
- Provide core infrastructre for the upcoming PCI endpoint library
extensions. Currently limited to ARM GICv3+, but in theory
extensible to other architectures.
- Provide a MSI domain::teardown() callback, which allows drivers to
undo the effects of the prepare() callback.
- Move the MSI domain::prepare() callback invocation to domain
creation time to avoid redundant (and in case of ARM/GIC-V3-ITS
confusing) invocations on every allocation.
In combination with the new teardown callback this removes some
ugly hacks in the GIC-V3-ITS driver, which pretended to work around
the short comings of the core code so far. With this update the
code is correct by design and implementation.
- Make the irqchip MSI library globally available, provide a MSI
parent domain creation helper and convert a bunch of (PCI/)MSI
drivers over to the modern MSI parent mechanism. This is the first
step to get rid of at least one incarnation of the three PCI/MSI
management schemes.
- The usual small cleanups and improvements"
* tag 'irq-msi-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
PCI/MSI: Use bool for MSI enable state tracking
PCI: tegra: Convert to MSI parent infrastructure
PCI: xgene: Convert to MSI parent infrastructure
PCI: apple: Convert to MSI parent infrastructure
irqchip/msi-lib: Honour the MSI_FLAG_NO_AFFINITY flag
irqchip/mvebu: Convert to msi_create_parent_irq_domain() helper
irqchip/gic: Convert to msi_create_parent_irq_domain() helper
genirq/msi: Add helper for creating MSI-parent irq domains
irqchip: Make irq-msi-lib.h globally available
irqchip/gic-v3-its: Use allocation size from the prepare call
genirq/msi: Engage the .msi_teardown() callback on domain removal
genirq/msi: Move prepare() call to per-device allocation
irqchip/gic-v3-its: Implement .msi_teardown() callback
genirq/msi: Add .msi_teardown() callback as the reverse of .msi_prepare()
irqchip/gic-v3-its: Add support for device tree msi-map and msi-mask
dt-bindings: PCI: pci-ep: Add support for iommu-map and msi-map
irqchip/gic-v3-its: Set IRQ_DOMAIN_FLAG_MSI_IMMUTABLE for ITS
irqdomain: Add IRQ_DOMAIN_FLAG_MSI_IMMUTABLE and irq_domain_is_msi_immutable()
platform-msi: Add msi_remove_device_irq_domain() in platform_device_msi_free_irqs_all()
genirq/msi: Rename msi_[un]lock_descs()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq cleanups from Thomas Gleixner:
"A set of cleanups for the generic interrupt subsystem:
- Consolidate on one set of functions for the interrupt domain code
to get rid of pointlessly duplicated code with only marginal
different semantics.
- Update the documentation accordingly and consolidate the coding
style of the irqdomain header"
* tag 'irq-cleanups-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
irqdomain: Consolidate coding style
irqdomain: Fix kernel-doc and add it to Documentation
Documentation: irqdomain: Update it
Documentation: irq-domain.rst: Simple improvements
Documentation: irq/concepts: Minor improvements
Documentation: irq/concepts: Add commas and reflow
irqdomain: Improve kernel-docs of functions
irqdomain: Make struct irq_domain_info variables const
irqdomain: Use irq_domain_instantiate()'s return value as initializers
irqdomain: Drop irq_linear_revmap()
pinctrl: keembay: Switch to irq_find_mapping()
irqchip/armada-370-xp: Switch to irq_find_mapping()
gpu: ipu-v3: Switch to irq_find_mapping()
gpio: idt3243x: Switch to irq_find_mapping()
sh: Switch to irq_find_mapping()
powerpc: Switch to irq_find_mapping()
irqdomain: Drop irq_domain_add_*() functions
powerpc: Switch irq_domain_add_nomap() to use fwnode
thermal: Switch to irq_domain_create_linear()
soc: Switch to irq_domain_create_*()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq controller updates from Thomas Gleixner:
"Update for interrupt chip drivers:
- Convert the generic interrupt chip to lock guards to remove copy &
pasta boilerplate code and gotos.
- A new driver fot the interrupt controller in the EcoNet EN751221
MIPS SoC.
- Extend the SG2042-MSI driver to support the new SG2044 SoC
- Updates and cleanups for the (ancient) VT8500 driver
- Improve the scalability of the ARM GICV4.1 ITS driver by utilizing
node local copies a VM's interrupt translation table when possible.
This results in a 12% reduction of VM IPI latency in certain
workloads.
- The usual cleanups and improvements all over the place"
* tag 'irq-drivers-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
irqchip/irq-pruss-intc: Simplify chained interrupt handler setup
irqchip/gic-v4.1: Use local 4_1 ITS to generate VSGI
irqchip/econet-en751221: Switch to of_fwnode_handle()
irqchip/irq-vt8500: Switch to irq_domain_create_*()
irqchip/econet-en751221: Switch to irq_domain_create_linear()
irqchip/irq-vt8500: Use fewer global variables and add error handling
irqchip/irq-vt8500: Use a dedicated chained handler function
irqchip/irq-vt8500: Don't require 8 interrupts from a chained controller
irqchip/irq-vt8500: Drop redundant copy of the device node pointer
irqchip/irq-vt8500: Split up ack/mask functions
irqchip/sg2042-msi: Fix wrong type cast in sg2044_msi_irq_ack()
irqchip/sg2042-msi: Add the Sophgo SG2044 MSI interrupt controller
irqchip/sg2042-msi: Introduce configurable chipinfo for SG2042
irqchip/sg2042-msi: Rename functions and data structures to be SG2042 agnostic
dt-bindings: interrupt-controller: Add Sophgo SG2044 MSI controller
genirq/generic-chip: Fix incorrect lock guard conversions
genirq/generic-chip: Remove unused lock wrappers
irqchip: Convert generic irqchip locking to guards
gpio: mvebu: Convert generic irqchip locking to guard()
ARM: orion/gpio:: Convert generic irqchip locking to guard()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq core updates from Thomas Gleixner:
"Updates for the generic interrupt subsystem core code:
- Address a long standing subtle problem in the CPU hotplug code for
affinity-managed interrupts.
Affinity-managed interrupts are shut down by the core code when the
last CPU in the affinity set goes offline and started up again when
the first CPU in the affinity set becomes online again.
This unfortunately does not take into account whether an interrupt
has been disabled before the last CPU goes offline and starts up
the interrupt unconditionally when the first CPU becomes online
again.
That's obviously not what drivers expect.
Address this by preserving the disabled state for affinity-managed
interrupts accross these CPU hotplug operations. All non-managed
interrupts are not affected by this because startup/shutdown is
coupled to request/free_irq() which obviously has to reset state.
- Support three-cell scheme interrupts to allow GPIO drivers to
specify interrupts from an already existing scheme
- Switch the interrupt subsystem core to lock guards. This gets rid
of quite some copy & pasta boilerplate code all over the place.
- The usual small cleanups and improvements all over the place"
* tag 'irq-core-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (59 commits)
genirq/irqdesc: Remove double locking in hwirq_show()
genirq: Retain disable depth for managed interrupts across CPU hotplug
genirq: Bump the size of the local variable for sprintf()
genirq/manage: Use the correct lock guard in irq_set_irq_wake()
genirq: Consistently use '%u' format specifier for unsigned int variables
genirq: Ensure flags in lock guard is consistently initialized
genirq: Fix inverted condition in handle_nested_irq()
genirq/cpuhotplug: Fix up lock guards conversion brainf..t
genirq: Use scoped_guard() to shut clang up
genirq: Remove unused remove_percpu_irq()
genirq: Remove irq_[get|put]_desc*()
genirq/manage: Rework irq_set_irqchip_state()
genirq/manage: Rework irq_get_irqchip_state()
genirq/manage: Rework teardown_percpu_nmi()
genirq/manage: Rework prepare_percpu_nmi()
genirq/manage: Rework disable_percpu_irq()
genirq/manage: Rework irq_percpu_is_enabled()
genirq/manage: Rework enable_percpu_irq()
genirq/manage: Rework irq_set_parent()
genirq/manage: Rework can_request_irq()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core entry code updates from Thomas Gleixner:
"Updates for the generic and architecture entry code:
- Move LoongArch and RISC-V ret_from_fork() implementations to C code
so that syscall_exit_user_mode() can be inlined
- Split the RISC-V ret_from_fork() implementation into return to user
and return to kernel, which gives a measurable performance
improvement
- Inline syscall_exit_user_mode() which benefits all architectures by
avoiding a function call and letting the compiler do better
optimizations"
* tag 'core-entry-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
LoongArch: entry: Fix include order
entry: Inline syscall_exit_to_user_mode()
LoongArch: entry: Migrate ret_from_fork() to C
riscv: entry: Split ret_from_fork() into user and kernel
riscv: entry: Convert ret_from_fork() to C
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 build updates from Ingo Molnar:
"Add the CONFIG_X86_NATIVE_CPU=y build option to locally optimize the
kernel build with '-march=native'"
* tag 'x86-build-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/kbuild/64: Restrict clang versions that can use '-march=native'
x86/kbuild/64: Test for the availability of the -mtune=native compiler flag
x86/kbuild/64: Add the CONFIG_X86_NATIVE_CPU option to locally optimize the kernel with '-march=native'
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 vdso updates from Ingo Molnar:
"Two changes to simplify the x86 vDSO code a bit"
* tag 'x86-entry-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/vdso: Remove redundant #ifdeffery around in_ia32_syscall()
x86/vdso: Remove #ifdeffery around page setup variants
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 debug updates from Ingo Molnar:
"Move the x86 page fault tracepoints to generic code, because other
architectures would like to make use of them as well"
* tag 'x86-debug-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tracing, x86/mm: Move page fault tracepoints to generic
x86/tracing, x86/mm: Remove redundant trace_pagefault_key
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Ingo Molnar:
"Misc x86 cleanups: kernel-doc updates and a string API transition
patch"
* tag 'x86-cleanups-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/power: hibernate: Fix W=1 build kernel-doc warnings
x86/mm/pat: Fix W=1 build kernel-doc warning
x86/CPU/AMD: Replace strcpy() with strscpy()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core x86 updates from Ingo Molnar:
"Boot code changes:
- A large series of changes to reorganize the x86 boot code into a
better isolated and easier to maintain base of PIC early startup
code in arch/x86/boot/startup/, by Ard Biesheuvel.
Motivation & background:
| Since commit
|
| c88d71508e36 ("x86/boot/64: Rewrite startup_64() in C")
|
| dated Jun 6 2017, we have been using C code on the boot path in a way
| that is not supported by the toolchain, i.e., to execute non-PIC C
| code from a mapping of memory that is different from the one provided
| to the linker. It should have been obvious at the time that this was a
| bad idea, given the need to sprinkle fixup_pointer() calls left and
| right to manipulate global variables (including non-pointer variables)
| without crashing.
|
| This C startup code has been expanding, and in particular, the SEV-SNP
| startup code has been expanding over the past couple of years, and
| grown many of these warts, where the C code needs to use special
| annotations or helpers to access global objects.
This tree includes the first phase of this work-in-progress x86
boot code reorganization.
Scalability enhancements and micro-optimizations:
- Improve code-patching scalability (Eric Dumazet)
- Remove MFENCEs for X86_BUG_CLFLUSH_MONITOR (Andrew Cooper)
CPU features enumeration updates:
- Thorough reorganization and cleanup of CPUID parsing APIs (Ahmed S.
Darwish)
- Fix, refactor and clean up the cacheinfo code (Ahmed S. Darwish,
Thomas Gleixner)
- Update CPUID bitfields to x86-cpuid-db v2.3 (Ahmed S. Darwish)
Memory management changes:
- Allow temporary MMs when IRQs are on (Andy Lutomirski)
- Opt-in to IRQs-off activate_mm() (Andy Lutomirski)
- Simplify choose_new_asid() and generate better code (Borislav
Petkov)
- Simplify 32-bit PAE page table handling (Dave Hansen)
- Always use dynamic memory layout (Kirill A. Shutemov)
- Make SPARSEMEM_VMEMMAP the only memory model (Kirill A. Shutemov)
- Make 5-level paging support unconditional (Kirill A. Shutemov)
- Stop prefetching current->mm->mmap_lock on page faults (Mateusz
Guzik)
- Predict valid_user_address() returning true (Mateusz Guzik)
- Consolidate initmem_init() (Mike Rapoport)
FPU support and vector computing:
- Enable Intel APX support (Chang S. Bae)
- Reorgnize and clean up the xstate code (Chang S. Bae)
- Make task_struct::thread constant size (Ingo Molnar)
- Restore fpu_thread_struct_whitelist() to fix
CONFIG_HARDENED_USERCOPY=y (Kees Cook)
- Simplify the switch_fpu_prepare() + switch_fpu_finish() logic (Oleg
Nesterov)
- Always preserve non-user xfeatures/flags in __state_perm (Sean
Christopherson)
Microcode loader changes:
- Help users notice when running old Intel microcode (Dave Hansen)
- AMD: Do not return error when microcode update is not necessary
(Annie Li)
- AMD: Clean the cache if update did not load microcode (Boris
Ostrovsky)
Code patching (alternatives) changes:
- Simplify, reorganize and clean up the x86 text-patching code (Ingo
Molnar)
- Make smp_text_poke_batch_process() subsume
smp_text_poke_batch_finish() (Nikolay Borisov)
- Refactor the {,un}use_temporary_mm() code (Peter Zijlstra)
Debugging support:
- Add early IDT and GDT loading to debug relocate_kernel() bugs
(David Woodhouse)
- Print the reason for the last reset on modern AMD CPUs (Yazen
Ghannam)
- Add AMD Zen debugging document (Mario Limonciello)
- Fix opcode map (!REX2) superscript tags (Masami Hiramatsu)
- Stop decoding i64 instructions in x86-64 mode at opcode (Masami
Hiramatsu)
CPU bugs and bug mitigations:
- Remove X86_BUG_MMIO_UNKNOWN (Borislav Petkov)
- Fix SRSO reporting on Zen1/2 with SMT disabled (Borislav Petkov)
- Restructure and harmonize the various CPU bug mitigation methods
(David Kaplan)
- Fix spectre_v2 mitigation default on Intel (Pawan Gupta)
MSR API:
- Large MSR code and API cleanup (Xin Li)
- In-kernel MSR API type cleanups and renames (Ingo Molnar)
PKEYS:
- Simplify PKRU update in signal frame (Chang S. Bae)
NMI handling code:
- Clean up, refactor and simplify the NMI handling code (Sohil Mehta)
- Improve NMI duration console printouts (Sohil Mehta)
Paravirt guests interface:
- Restrict PARAVIRT_XXL to 64-bit only (Kirill A. Shutemov)
SEV support:
- Share the sev_secrets_pa value again (Tom Lendacky)
x86 platform changes:
- Introduce the <asm/amd/> header namespace (Ingo Molnar)
- i2c: piix4, x86/platform: Move the SB800 PIIX4 FCH definitions to
<asm/amd/fch.h> (Mario Limonciello)
Fixes and cleanups:
- x86 assembly code cleanups and fixes (Uros Bizjak)
- Misc fixes and cleanups (Andi Kleen, Andy Lutomirski, Andy
Shevchenko, Ard Biesheuvel, Bagas Sanjaya, Baoquan He, Borislav
Petkov, Chang S. Bae, Chao Gao, Dan Williams, Dave Hansen, David
Kaplan, David Woodhouse, Eric Biggers, Ingo Molnar, Josh Poimboeuf,
Juergen Gross, Malaya Kumar Rout, Mario Limonciello, Nathan
Chancellor, Oleg Nesterov, Pawan Gupta, Peter Zijlstra, Shivank
Garg, Sohil Mehta, Thomas Gleixner, Uros Bizjak, Xin Li)"
* tag 'x86-core-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (331 commits)
x86/bugs: Fix spectre_v2 mitigation default on Intel
x86/bugs: Restructure ITS mitigation
x86/xen/msr: Fix uninitialized variable 'err'
x86/msr: Remove a superfluous inclusion of <asm/asm.h>
x86/paravirt: Restrict PARAVIRT_XXL to 64-bit only
x86/mm/64: Make 5-level paging support unconditional
x86/mm/64: Make SPARSEMEM_VMEMMAP the only memory model
x86/mm/64: Always use dynamic memory layout
x86/bugs: Fix indentation due to ITS merge
x86/cpuid: Rename hypervisor_cpuid_base()/for_each_possible_hypervisor_cpuid_base() to cpuid_base_hypervisor()/for_each_possible_cpuid_base_hypervisor()
x86/cpu/intel: Rename CPUID(0x2) descriptors iterator parameter
x86/cacheinfo: Rename CPUID(0x2) descriptors iterator parameter
x86/cpuid: Rename cpuid_get_leaf_0x2_regs() to cpuid_leaf_0x2()
x86/cpuid: Rename have_cpuid_p() to cpuid_feature()
x86/cpuid: Set <asm/cpuid/api.h> as the main CPUID header
x86/cpuid: Move CPUID(0x2) APIs into <cpuid/api.h>
x86/msr: Add rdmsrl_on_cpu() compatibility wrapper
x86/mm: Fix kernel-doc descriptions of various pgtable methods
x86/asm-offsets: Export certain 'struct cpuinfo_x86' fields for 64-bit asm use too
x86/boot: Defer initialization of VM space related global variables
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events updates from Ingo Molnar:
"Core & generic-arch updates:
- Add support for dynamic constraints and propagate it to the Intel
driver (Kan Liang)
- Fix & enhance driver-specific throttling support (Kan Liang)
- Record sample last_period before updating on the x86 and PowerPC
platforms (Mark Barnett)
- Make perf_pmu_unregister() usable (Peter Zijlstra)
- Unify perf_event_free_task() / perf_event_exit_task_context()
(Peter Zijlstra)
- Simplify perf_event_release_kernel() and perf_event_free_task()
(Peter Zijlstra)
- Allocate non-contiguous AUX pages by default (Yabin Cui)
Uprobes updates:
- Add support to emulate NOP instructions (Jiri Olsa)
- selftests/bpf: Add 5-byte NOP uprobe trigger benchmark (Jiri Olsa)
x86 Intel PMU enhancements:
- Support Intel Auto Counter Reload [ACR] (Kan Liang)
- Add PMU support for Clearwater Forest (Dapeng Mi)
- Arch-PEBS preparatory changes: (Dapeng Mi)
- Parse CPUID archPerfmonExt leaves for non-hybrid CPUs
- Decouple BTS initialization from PEBS initialization
- Introduce pairs of PEBS static calls
x86 AMD PMU enhancements:
- Use hrtimer for handling overflows in the AMD uncore driver
(Sandipan Das)
- Prevent UMC counters from saturating (Sandipan Das)
Fixes and cleanups:
- Fix put_ctx() ordering (Frederic Weisbecker)
- Fix irq work dereferencing garbage (Frederic Weisbecker)
- Misc fixes and cleanups (Changbin Du, Frederic Weisbecker, Ian
Rogers, Ingo Molnar, Kan Liang, Peter Zijlstra, Qing Wang, Sandipan
Das, Thorsten Blum)"
* tag 'perf-core-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits)
perf/headers: Clean up <linux/perf_event.h> a bit
perf/uapi: Clean up <uapi/linux/perf_event.h> a bit
perf/uapi: Fix PERF_RECORD_SAMPLE comments in <uapi/linux/perf_event.h>
mips/perf: Remove driver-specific throttle support
xtensa/perf: Remove driver-specific throttle support
sparc/perf: Remove driver-specific throttle support
loongarch/perf: Remove driver-specific throttle support
csky/perf: Remove driver-specific throttle support
arc/perf: Remove driver-specific throttle support
alpha/perf: Remove driver-specific throttle support
perf/apple_m1: Remove driver-specific throttle support
perf/arm: Remove driver-specific throttle support
s390/perf: Remove driver-specific throttle support
powerpc/perf: Remove driver-specific throttle support
perf/x86/zhaoxin: Remove driver-specific throttle support
perf/x86/amd: Remove driver-specific throttle support
perf/x86/intel: Remove driver-specific throttle support
perf: Only dump the throttle log for the leader
perf: Fix the throttle logic for a group
perf/core: Add the is_event_in_freq_mode() helper to simplify the code
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Core & fair scheduler changes:
- Tweak wait_task_inactive() to force dequeue sched_delayed tasks
(John Stultz)
- Adhere to place_entity() constraints (Peter Zijlstra)
- Allow decaying util_est when util_avg > CPU capacity (Pierre
Gondois)
- Fix up wake_up_sync() vs DELAYED_DEQUEUE (Xuewen Yan)
Energy management:
- Introduce sched_update_asym_prefer_cpu() (K Prateek Nayak)
- cpufreq/amd-pstate: Update asym_prefer_cpu when core rankings
change (K Prateek Nayak)
- Align uclamp and util_est and call before freq update (Xuewen Yan)
CPU isolation:
- Make use of more than one housekeeping CPU (Phil Auld)
RT scheduler:
- Fix race in push_rt_task() (Harshit Agarwal)
- Add kernel cmdline option for rt_group_sched (Michal Koutný)
Scheduler topology support:
- Improve topology_span_sane speed (Steve Wahl)
Scheduler debugging:
- Move and extend the sched_process_exit() tracepoint (Andrii
Nakryiko)
- Add RT_GROUP WARN checks for non-root task_groups (Michal Koutný)
- Fix trace_sched_switch(.prev_state) (Peter Zijlstra)
- Untangle cond_resched() and live-patching (Peter Zijlstra)
Fixes and cleanups:
- Misc fixes and cleanups (K Prateek Nayak, Michal Koutný, Peter
Zijlstra, Xuewen Yan)"
* tag 'sched-core-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (26 commits)
sched/uclamp: Align uclamp and util_est and call before freq update
sched/util_est: Simplify condition for util_est_{en,de}queue()
sched/fair: Fixup wake_up_sync() vs DELAYED_DEQUEUE
sched,livepatch: Untangle cond_resched() and live-patching
sched/core: Tweak wait_task_inactive() to force dequeue sched_delayed tasks
sched/fair: Adhere to place_entity() constraints
sched/debug: Print the local group's asym_prefer_cpu
cpufreq/amd-pstate: Update asym_prefer_cpu when core rankings change
sched/topology: Introduce sched_update_asym_prefer_cpu()
sched/fair: Use READ_ONCE() to read sg->asym_prefer_cpu
sched/isolation: Make use of more than one housekeeping cpu
sched/rt: Fix race in push_rt_task
sched: Add annotations to RT_GROUP_SCHED fields
sched: Add RT_GROUP WARN checks for non-root task_groups
sched: Do not construct nor expose RT_GROUP_SCHED structures if disabled
sched: Bypass bandwitdh checks with runtime disabled RT_GROUP_SCHED
sched: Skip non-root task_groups with disabled RT_GROUP_SCHED
sched: Add commadline option for RT_GROUP_SCHED toggling
sched: Always initialize rt_rq's task_group
sched: Remove unneeed macro wrap
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
- Speed up SHT_GROUP reindexing (Josh Poimboeuf)
- Fix up st_info in COMDAT group section (Rong Xu)
* tag 'objtool-core-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Speed up SHT_GROUP reindexing
objtool: Fix up st_info in COMDAT group section
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"Futexes:
- Add support for task local hash maps (Sebastian Andrzej Siewior,
Peter Zijlstra)
- Implement the FUTEX2_NUMA ABI, which feature extends the futex
interface to be NUMA-aware. On NUMA-aware futexes a second u32 word
containing the NUMA node is added to after the u32 futex value word
(Peter Zijlstra)
- Implement the FUTEX2_MPOL ABI, which feature extends the futex
interface to be mempolicy-aware as well, to further refine futex
node mappings and lookups (Peter Zijlstra)
Locking primitives:
- Misc cleanups (Andy Shevchenko, Borislav Petkov, Colin Ian King,
Ingo Molnar, Nam Cao, Peter Zijlstra)
Lockdep:
- Prevent abuse of lockdep subclasses (Waiman Long)
- Add number of dynamic keys to /proc/lockdep_stats (Waiman Long)
Plus misc cleanups and fixes"
* tag 'locking-core-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (35 commits)
selftests/futex: Fix spelling mistake "unitiliazed" -> "uninitialized"
futex: Correct the kernedoc return value for futex_wait_setup().
tools headers: Synchronize prctl.h ABI header
futex: Use RCU_INIT_POINTER() in futex_mm_init().
selftests/futex: Use TAP output in futex_numa_mpol
selftests/futex: Use TAP output in futex_priv_hash
futex: Fix kernel-doc comments
futex: Relax the rcu_assign_pointer() assignment of mm->futex_phash in futex_mm_init()
futex: Fix outdated comment in struct restart_block
locking/lockdep: Add number of dynamic keys to /proc/lockdep_stats
locking/lockdep: Prevent abuse of lockdep subclass
locking/lockdep: Move hlock_equal() to the respective #ifdeffery
futex,selftests: Add another FUTEX2_NUMA selftest
selftests/futex: Add futex_numa_mpol
selftests/futex: Add futex_priv_hash
selftests/futex: Build without headers nonsense
tools/perf: Allow to select the number of hash buckets
tools headers: Synchronize prctl.h ABI header
futex: Implement FUTEX2_MPOL
futex: Implement FUTEX2_NUMA
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Madhavan Srinivasan:
- Support for dynamic preemption
- Migrate powerpc boards GPIO driver to new setter API
- Added new PMU for KVM host-wide measurement
- Enhancement to htmdump driver to support more functions
- Added character device for couple RTAS supported APIs
- Minor fixes and cleanup
Thanks to Amit Machhiwal, Athira Rajeev, Bagas Sanjaya, Bartosz
Golaszewski, Christophe Leroy, Eddie James, Gaurav Batra, Gautam
Menghani, Geert Uytterhoeven, Haren Myneni, Hari Bathini, Jiri Slaby
(SUSE), Linus Walleij, Michal Suchanek, Naveen N Rao (AMD), Nilay
Shroff, Ricardo B. Marlière, Ritesh Harjani (IBM), Sathvika Vasireddy,
Shrikanth Hegde, Stephen Rothwell, Sourabh Jain, Thorsten Blum, Vaibhav
Jain, Venkat Rao Bagalkote, and Viktor Malik.
* tag 'powerpc-6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (52 commits)
MAINTAINERS: powerpc: Remove myself as a reviewer
powerpc/iommu: Use str_disabled_enabled() helper
powerpc/powermac: Use str_enabled_disabled() and str_on_off() helpers
powerpc/mm/fault: Use str_write_read() helper function
powerpc: Replace strcpy() with strscpy() in proc_ppc64_init()
powerpc/pseries/iommu: Fix kmemleak in TCE table userspace view
powerpc/kernel: Fix ppc_save_regs inclusion in build
powerpc: Transliterate author name and remove FIXME
powerpc/pseries/htmdump: Include header file to get is_kvm_guest() definition
KVM: PPC: Book3S HV: Fix IRQ map warnings with XICS on pSeries KVM Guest
powerpc/8xx: Reduce alignment constraint for kernel memory
powerpc/boot: Fix build with gcc 15
powerpc/pseries/htmdump: Add documentation for H_HTM debugfs interface
powerpc/pseries/htmdump: Add htm capabilities support to htmdump module
powerpc/pseries/htmdump: Add htm flags support to htmdump module
powerpc/pseries/htmdump: Add htm setup support to htmdump module
powerpc/pseries/htmdump: Add htm info support to htmdump module
powerpc/pseries/htmdump: Add htm status support to htmdump module
powerpc/pseries/htmdump: Add htm start support to htmdump module
powerpc/pseries/htmdump: Add htm configure support to htmdump module
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
- Large rework of the protected key crypto code to allow for
asynchronous handling without memory allocation
- Speed up system call entry/exit path by re-implementing lazy ASCE
handling
- Add module autoload support for the diag288_wdt watchdog device
driver
- Get rid of s390 specific strcpy() and strncpy() implementations, and
switch all remaining users to strscpy() when possible
- Various other small fixes and improvements
* tag 's390-6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (51 commits)
s390/pci: Serialize device addition and removal
s390/pci: Allow re-add of a reserved but not yet removed device
s390/pci: Prevent self deletion in disable_slot()
s390/pci: Remove redundant bus removal and disable from zpci_release_device()
s390/crypto: Extend protected key conversion retry loop
s390/pci: Fix __pcilg_mio_inuser() inline assembly
s390/ptrace: Always inline regs_get_kernel_stack_nth() and regs_get_register()
s390/thread_info: Cleanup header includes
s390/extmem: Add workaround for DCSS unload diag
s390/crypto: Rework protected key AES for true asynch support
s390/cpacf: Rework cpacf_pcc() to return condition code
s390/mm: Fix potential use-after-free in __crst_table_upgrade()
s390/mm: Add mmap_assert_write_locked() check to crst_table_upgrade()
s390/string: Remove strcpy() implementation
s390/con3270: Use strscpy() instead of strcpy()
s390/boot: Use strspcy() instead of strcpy()
s390: Simple strcpy() to strscpy() conversions
s390/pkey/crypto: Introduce xflags param for pkey in-kernel API
s390/pkey: Provide and pass xflags within pkey and zcrypt layers
s390/uv: Remove uv_get_secret_metadata function
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit updates from Shuah Khan:
- Enable qemu_config for riscv32, sparc 64-bit, PowerPC 32-bit BE and
64-bit LE
- Enable CONFIG_SPARC32 to clearly differentiate between sparc 32-bit
and 64-bit configurations
- Enable CONFIG_CPU_BIG_ENDIAN to clearly differentiate between powerpc
LE and BE configurations
- Add feature to list available architectures to kunit tool
- Fixes to bugs and changes to documentation
* tag 'linux_kselftest-kunit-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: Fix wrong parameter to kunit_deactivate_static_stub()
kunit: tool: add test counts to JSON output
Documentation: kunit: improve example on testing static functions
kunit: executor: Remove const from kunit_filter_suites() allocation type
kunit: qemu_configs: Disable faulting tests on 32-bit SPARC
kunit: qemu_configs: Add 64-bit SPARC configuration
kunit: qemu_configs: sparc: Explicitly enable CONFIG_SPARC32=y
kunit: qemu_configs: Add PowerPC 32-bit BE and 64-bit LE
kunit: qemu_configs: powerpc: Explicitly enable CONFIG_CPU_BIG_ENDIAN=y
kunit: tool: Implement listing of available architectures
kunit: qemu_configs: Add riscv32 config
kunit: configs: Enable CONFIG_INIT_STACK_ALL_PATTERN in all_tests
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest updates from Shuah Khan:
"Fixes:
- cpufreq test to not double suspend in rtcwake case
- compile error in pid_namespace test
- run_kselftest.sh to use readlink if realpath is not available
- cpufreq basic read and update testcases
- ftrace to add poll to a gen_file so test can find it at run-time
- spelling errors in perf_events test"
* tag 'linux_kselftest-next-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/run_kselftest.sh: Use readlink if realpath is not available
selftests/timens: timerfd: Use correct clockid type in tclock_gettime()
selftests/timens: Make run_tests() functions static
selftests/timens: Print TAP headers
selftests: pid_namespace: add missing sys/mount.h include in pid_max.c
kselftest: cpufreq: Get rid of double suspend in rtcwake case
selftests/cpufreq: Fix cpufreq basic read and update testcases
selftests/ftrace: Convert poll to a gen_file
selftests/perf_events: Fix spelling mistake "sycnhronize" -> "synchronize"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux
Pull RCU updates from Joel Fernandes:
- Removed swake_up_one_online() workaround
- Reverted an incorrect rcuog wake-up fix from offline softirq
- Rust RCU Guard methods marked as inline
- Updated MAINTAINERS with Joel’s and Zqiang's new email address
- Replaced magic constant in rcu_seq_done_exact() with named constant
- Added warning mechanism to validate rcu_seq_done_exact()
- Switched SRCU polling API to use rcu_seq_done_exact()
- Commented on redundant delta check in rcu_seq_done_exact()
- Made ->gpwrap tests in rcutorture more frequent
- Fixed reuse of ARM64 images in rcutorture
- rcutorture improved to check Kconfig and reader conflict handling
- Extracted logic from rcu_torture_one_read() for clarity
- Updated LWN RCU API documentation links
- Enabled --do-rt in torture.sh for CONFIG_PREEMPT_RT
- Added tests for SRCU up/down reader primitives
- Added comments and delays checks in rcutorture
- Deprecated srcu_read_lock_lite() and srcu_read_unlock_lite() via checkpatch
- Added --do-normal and --do-no-normal to torture.sh
- Added RCU Rust binding tests to torture.sh
- Reduced CPU overcommit and removed MAXSMP/CPUMASK_OFFSTACK in TREE01
- Replaced kmalloc() with kcalloc() in rcuscale
- Refined listRCU example code for stale data elimination
- Fixed hardirq count bug for x86 in cpu_stall_cputime
- Added safety checks in rcu/nocb for offloaded rdp access
- Other miscellaneous changes
* tag 'next.2025.05.17a' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux: (27 commits)
rcutorture: Fix issue with re-using old images on ARM64
rcutorture: Remove MAXSMP and CPUMASK_OFFSTACK from TREE01
rcutorture: Reduce TREE01 CPU overcommit
torture: Check for "Call trace:" as well as "Call Trace:"
rcutorture: Perform more frequent testing of ->gpwrap
torture: Add testing of RCU's Rust bindings to torture.sh
torture: Add --do-{,no-}normal to torture.sh
checkpatch: Deprecate srcu_read_lock_lite() and srcu_read_unlock_lite()
rcutorture: Comment invocations of tick_dep_set_task()
rcu/nocb: Add Safe checks for access offloaded rdp
rcuscale: using kcalloc() to relpace kmalloc()
doc/RCU/listRCU: refine example code for eliminating stale data
doc: Update LWN RCU API links in whatisRCU.rst
Revert "rcu/nocb: Fix rcuog wake-up from offline softirq"
rust: sync: rcu: Mark Guard methods as inline
rcu/cpu_stall_cputime: fix the hardirq count for x86 architecture
rcu: Remove swake_up_one_online() bandaid
MAINTAINERS: Update Zqiang's email address
rcutorture: Make torture.sh --do-rt use CONFIG_PREEMPT_RT
srcu: Use rcu_seq_done_exact() for polling API
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm updates from Jarkko Sakkinen:
"This is only a small pull request with fixes, as possible features
moved to +1 release"
* tag 'tpmdd-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm_crb: ffa_tpm: fix/update comments describing the CRB over FFA ABI
tpm_crb_ffa: use dev_xx() macro to print log
tpm_ffa_crb: access tpm service over FF-A direct message request v2
tpm: remove kmalloc failure error message
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Fix memcpy_sglist to handle partially overlapping SG lists
- Use memcpy_sglist to replace null skcipher
- Rename CRYPTO_TESTS to CRYPTO_BENCHMARK
- Flip CRYPTO_MANAGER_DISABLE_TEST into CRYPTO_SELFTESTS
- Hide CRYPTO_MANAGER
- Add delayed freeing of driver crypto_alg structures
Compression:
- Allocate large buffers on first use instead of initialisation in scomp
- Drop destination linearisation buffer in scomp
- Move scomp stream allocation into acomp
- Add acomp scatter-gather walker
- Remove request chaining
- Add optional async request allocation
Hashing:
- Remove request chaining
- Add optional async request allocation
- Move partial block handling into API
- Add ahash support to hmac
- Fix shash documentation to disallow usage in hard IRQs
Algorithms:
- Remove unnecessary SIMD fallback code on x86 and arm/arm64
- Drop avx10_256 xts(aes)/ctr(aes) on x86
- Improve avx-512 optimisations for xts(aes)
- Move chacha arch implementations into lib/crypto
- Move poly1305 into lib/crypto and drop unused Crypto API algorithm
- Disable powerpc/poly1305 as it has no SIMD fallback
- Move sha256 arch implementations into lib/crypto
- Convert deflate to acomp
- Set block size correctly in cbcmac
Drivers:
- Do not use sg_dma_len before mapping in sun8i-ss
- Fix warm-reboot failure by making shutdown do more work in qat
- Add locking in zynqmp-sha
- Remove cavium/zip
- Add support for PCI device 0x17D8 to ccp
- Add qat_6xxx support in qat
- Add support for RK3576 in rockchip-rng
- Add support for i.MX8QM in caam
Others:
- Fix irq_fpu_usable/kernel_fpu_begin inconsistency during CPU bring-up
- Add new SEV/SNP platform shutdown API in ccp"
* tag 'v6.16-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (382 commits)
x86/fpu: Fix irq_fpu_usable() to return false during CPU onlining
crypto: qat - add missing header inclusion
crypto: api - Redo lookup on EEXIST
Revert "crypto: testmgr - Add hash export format testing"
crypto: marvell/cesa - Do not chain submitted requests
crypto: powerpc/poly1305 - add depends on BROKEN for now
Revert "crypto: powerpc/poly1305 - Add SIMD fallback"
crypto: ccp - Add missing tee info reg for teev2
crypto: ccp - Add missing bootloader info reg for pspv5
crypto: sun8i-ce - move fallback ahash_request to the end of the struct
crypto: octeontx2 - Use dynamic allocated memory region for lmtst
crypto: octeontx2 - Initialize cptlfs device info once
crypto: xts - Only add ecb if it is not already there
crypto: lrw - Only add ecb if it is not already there
crypto: testmgr - Add hash export format testing
crypto: testmgr - Use ahash for generic tfm
crypto: hmac - Add ahash support
crypto: testmgr - Ignore EEXIST on shash allocation
crypto: algapi - Add driver template support to crypto_inst_setname
crypto: shash - Set reqsize in shash_alg
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull CRC updates from Eric Biggers:
"Cleanups for the kernel's CRC (cyclic redundancy check) code:
- Use __ro_after_init where appropriate
- Remove unnecessary static_key on s390
- Rename some source code files
- Rename the crc32 and crc32c crypto API modules
- Use subsys_initcall instead of arch_initcall
- Restore maintainers for crc_kunit.c
- Fold crc16_byte() into crc16.c
- Add some SPDX license identifiers"
* tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crc32: add SPDX license identifier
lib/crc16: unexport crc16_table and crc16_byte()
w1: ds2406: use crc16() instead of crc16_byte() loop
MAINTAINERS: add crc_kunit.c back to CRC LIBRARY
lib/crc: make arch-optimized code use subsys_initcall
crypto: crc32 - remove "generic" from file and module names
x86/crc: drop "glue" from filenames
sparc/crc: drop "glue" from filenames
s390/crc: drop "glue" from filenames
powerpc/crc: rename crc32-vpmsum_core.S to crc-vpmsum-template.S
powerpc/crc: drop "glue" from filenames
arm64/crc: drop "glue" from filenames
arm/crc: drop "glue" from filenames
s390/crc32: Remove no-op module init and exit functions
s390/crc32: Remove have_vxrs static key
lib/crc: make the CPU feature static keys __ro_after_init
|
|
Pull fscrypt update from Eric Biggers:
"Add support for 'hardware-wrapped inline encryption keys' to fscrypt.
When enabled on supported platforms, this feature protects file
contents keys from certain attacks, such as cold boot attacks.
This feature uses the block layer support for wrapped keys which was
merged in 6.15. Wrapped key support has existed out-of-tree in Android
for a long time, and it's finally ready for upstream now that there is
a platform on which it works end-to-end with upstream.
Specifically, it works on the Qualcomm SM8650 HDK, using the Qualcomm
ICE (Inline Crypto Engine) and HWKM (Hardware Key Manager). The
corresponding driver support is included in the SCSI tree for 6.16.
Validation for this feature includes two new tests that were already
merged into xfstests (generic/368 and generic/369)"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux:
fscrypt: add support for hardware-wrapped keys
|
|
Pull xfs updates from Carlos Maiolino:
- Atomic writes for XFS
- Remove experimental warnings for pNFS, scrub and parent pointers
* tag 'xfs-merge-6.16' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (26 commits)
xfs: add inode to zone caching for data placement
xfs: free the item in xfs_mru_cache_insert on failure
xfs: remove the EXPERIMENTAL warning for pNFS
xfs: remove some EXPERIMENTAL warnings
xfs: Remove deprecated xfs_bufd sysctl parameters
xfs: stop using set_blocksize
xfs: allow sysadmins to specify a maximum atomic write limit at mount time
xfs: update atomic write limits
xfs: add xfs_calc_atomic_write_unit_max()
xfs: add xfs_file_dio_write_atomic()
xfs: commit CoW-based atomic writes atomically
xfs: add large atomic writes checks in xfs_direct_write_iomap_begin()
xfs: add xfs_atomic_write_cow_iomap_begin()
xfs: refine atomic write size check in xfs_file_write_iter()
xfs: refactor xfs_reflink_end_cow_extent()
xfs: allow block allocator to take an alignment hint
xfs: ignore HW which cannot atomic write a single block
xfs: add helpers to compute transaction reservation for finishing intent items
xfs: add helpers to compute log item overhead
xfs: separate out setting buftarg atomic writes limits
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs updates from Gao Xiang:
"In this cycle, Intel QAT hardware accelerators are supported to
improve DEFLATE decompression performance. I've tested it with the
enwik9 dataset of 1 MiB pclusters on our Intel Sapphire Rapids
bare-metal server and a PL0 ESSD, and the sequential read performance
even surpasses LZ4 software decompression on this setup.
In addition, a `fsoffset` mount option is introduced for file-backed
mounts to specify the filesystem offset in order to adapt customized
container formats.
And other improvements and minor cleanups. Summary:
- Add a `fsoffset` mount option to specify the filesystem offset
- Support Intel QAT accelerators to boost up the DEFLATE algorithm
- Initialize per-CPU workers and CPU hotplug hooks lazily to avoid
unnecessary overhead when EROFS is not mounted
- Fix file handle encoding for 64-bit NIDs
- Minor cleanups"
* tag 'erofs-for-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: support DEFLATE decompression by using Intel QAT
erofs: clean up erofs_{init,exit}_sysfs()
erofs: add 'fsoffset' mount option to specify filesystem offset
erofs: lazily initialize per-CPU workers and CPU hotplug hooks
erofs: refine readahead tracepoint
erofs: avoid using multiple devices with different type
erofs: fix file handle encoding for 64-bit NIDs
|
|
Pull bcachefs updates from Kent Overstreet:
- Poisoned extents can now be moved: this lets us handle bitrotted data
without deleting it. For now, reading from poisoned extents only
returns -EIO: in the future we'll have an API for specifying "read
this data even if there were bitflips".
- Incompatible features may now be enabled at runtime, via
"opts/version_upgrade" in sysfs. Toggle it to incompatible, and then
toggle it back - option changes via the sysfs interface are
persistent.
- Various changes to support deployable disk images:
- RO mounts now use less memory
- Images may be stripped of alloc info, particularly useful for
slimming them down if they will primarily be mounted RO. Alloc
info will be automatically regenerated on first RW mount, and
this is quite fast
- Filesystem images generated with 'bcachefs image' will be
automatically resized the first time they're mounted on a larger
device
The images 'bcachefs image' generates with compression enabled have
been comparable in size to those generated by squashfs and erofs -
but you get a full RW capable filesystem
- Major error message improvements for btree node reads, data reads,
and elsewhere. We now build up a single error message that lists all
the errors encountered, actions taken to repair, and success/failure
of the IO. This extends to other error paths that may kick off other
actions, e.g. scheduling recovery passes: actions we took because of
an error are included in that error message, with
grouping/indentation so we can see what caused what.
- New option, 'rebalance_on_ac_only'. Does exactly what the name
suggests, quite handy with background compression.
- Repair/self healing:
- We can now kick off recovery passes and run them in the
background if we detect errors. Currently, this is just used by
code that walks backpointers. We now also check for missing
backpointers at runtime and run check_extents_to_backpointers if
required. The messy 6.14 upgrade left missing backpointers for
some users, and this will correct that automatically instead of
requiring a manual fsck - some users noticed this as copygc
spinning and not making progress.
In the future, as more recovery passes come online, we'll be able
to repair and recover from nearly anything - except for
unreadable btree nodes, and that's why you're using replication,
of course - without shutting down the filesystem.
- There's a new recovery pass, for checking the rebalance_work
btree, which tracks extents that rebalance will process later.
- Hardening:
- Close the last known hole in btree iterator/btree locking
assertions: path->should_be_locked paths must stay locked until
the end of the transaction. This shook out a few bugs, including
a performance issue that was causing unnecessary path_upgrade
transaction restarts.
- Performance:
- Faster snapshot deletion: this is an incompatible feature, as it
requires new sentinal values, for safety. Snapshot deletion no
longer has to do a full metadata scan, it now just scans the
inodes btree: if an extent/dirent/xattr is present for a given
snapshot ID, we already require that an inode be present with
that same snapshot ID.
If/when users hit scalability limits again (ridiculously huge
filesystems with lots of inodes, and many sparse snapshots), let
me know - the next step will be to add an index from snapshot ID
-> inode number, which won't be too hard.
- Faster device removal: the "scan for pointers to this device" no
longer does a full metadata scan, instead it walks backpointers.
Like fast snapshot deletion this is another incompat feature: it
also requires a new sentinal value, because we don't want to
reuse these device IDs until after a fsck.
- We're now coalescing redundant accounting updates prior to
transaction commit, taking some pressure off the journal. Shortly
we'll also be doing multiple extent updates in a transaction in
the main write path, which combined with the previous should
drastically cut down on the amount of metadata updates we have to
journal.
- Stack usage improvements: All allocator state has been moved off the
stack
- Debug improvements:
- enumerated refcounts: The debug code previously used for
filesystem write refs is now a small library, and used for other
heavily used refcounts. Different users of a refcount are
enumerated, making it much easier to debug refcount issues.
- Async object debugging: There's a new kconfig option that makes
various async objects (different types of bios, data updates,
write ops, etc.) visible in debugfs, and it should be fast enough
to leave on in production.
- Various sets of assertions no longer require
CONFIG_BCACHEFS_DEBUG, instead they're controlled by module
parameters and static keys, meaning users won't need to compile
custom kernels as often to help debug issues.
- bch2_trans_kmalloc() calls can be tracked (there's a new kconfig
option). With it on you can check the btree_transaction_stats in
debugfs to see the bch2_trans_kmalloc() calls a transaction did
when it used the most memory.
* tag 'bcachefs-2025-05-24' of git://evilpiepirate.org/bcachefs: (218 commits)
bcachefs: Don't mount bs > ps without TRANSPARENT_HUGEPAGE
bcachefs: Fix btree_iter_next_node() for new locking asserts
bcachefs: Ensure we don't use a blacklisted journal seq
bcachefs: Small check_fix_ptr fixes
bcachefs: Fix opts.recovery_pass_last
bcachefs: Fix allocate -> self healing path
bcachefs: Fix endianness in casefold check/repair
bcachefs: Path must be locked if trans->locked && should_be_locked
bcachefs: Simplify bch2_path_put()
bcachefs: Plumb btree_trans for more locking asserts
bcachefs: Clear trans->locked before unlock
bcachefs: Clear should_be_locked before unlock in key_cache_drop()
bcachefs: bch2_path_get() reuses paths if upgrade_fails & !should_be_locked
bcachefs: Give out new path if upgrade fails
bcachefs: Fix btree_path_get_locks when not doing trans restart
bcachefs: btree_node_locked_type_nowrite()
bcachefs: Kill bch2_path_put_nokeep()
bcachefs: bch2_journal_write_checksum()
bcachefs: Reduce stack usage in data_update_index_update()
bcachefs: bch2_trans_log_str()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 updates from Andreas Gruenbacher:
- Fix the long-standing warnings in inode_to_wb() when CONFIG_LOCKDEP
is enabled: gfs2 doesn't support cgroup writeback and so inode->i_wb
will never change. This is the counterpart of commit 9e888998ea4d
("writeback: fix false warning in inode_to_wb()")
- Fix a hang introduced by commit 8d391972ae2d ("gfs2: Remove
__gfs2_writepage()"): prevent gfs2_logd from creating transactions
for jdata pages while trying to flush the log
- Fix a race between gfs2_create_inode() and gfs2_evict_inode() by
deallocating partially created inodes on the gfs2_create_inode()
error path
- Fix a bug in the journal head lookup code that could cause mount to
fail after successful recovery
- Various smaller fixes and cleanups from various people
* tag 'gfs2-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: (23 commits)
gfs2: No more gfs2_find_jhead caching
gfs2: Get rid of duplicate log head lookup
gfs2: Simplify clean_journal
gfs2: Simplify gfs2_log_pointers_init
gfs2: Move gfs2_log_pointers_init
gfs2: Minor comments fix
gfs2: Don't start unnecessary transactions during log flush
gfs2: Move gfs2_trans_add_databufs
gfs2: Rename jdata_dirty_folio to gfs2_jdata_dirty_folio
gfs2: avoid inefficient use of crc32_le_shift()
gfs2: Do not call iomap_zero_range beyond eof
gfs: don't check for AOP_WRITEPAGE_ACTIVATE in gfs2_write_jdata_batch
gfs2: Fix usage of bio->bi_status in gfs2_end_log_write
gfs2: deallocate inodes in gfs2_create_inode
gfs2: Move GIF_ALLOC_FAILED check out of gfs2_ea_dealloc
gfs2: Move gfs2_dinode_dealloc
gfs2: Don't reread inodes unnecessarily
gfs2: gfs2_create_inode error handling fix
gfs2: Remove unnecessary NULL check before free_percpu()
gfs2: check sb_min_blocksize return value
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/a.hindborg/linux
Pull configfs updates from Andreas Hindborg:
- Allow creation of rw files with custom permissions. This allows
drivers to better protect secrets written through configfs
- Fix a bug where an error condition did not cause an early return
while populating attributes
- Report ENOMEM rather than EFAULT when kvasprintf() fails in
config_item_set_name()
- Add a Rust API for configfs. This allows Rust drivers to use configfs
through a memory safe interface
* tag 'configfs-for-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/a.hindborg/linux:
MAINTAINERS: add configfs Rust abstractions
rust: configfs: add a sample demonstrating configfs usage
rust: configfs: introduce rust support for configfs
configfs: Correct error value returned by API config_item_set_name()
configfs: Do not override creating attribute file failure in populate_attrs()
configfs: Delete semicolon from macro type_print() definition
configfs: Add CONFIGFS_ATTR_PERM helper
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"Apart from numerous cleanups, there are some performance improvements
and one minor mount option update. There's one more radix-tree
conversion (one remaining), and continued work towards enabling large
folios (almost finished).
Performance:
- extent buffer conversion to xarray gains throughput and runtime
improvements on metadata heavy operations doing writeback (sample
test shows +50% throughput, -33% runtime)
- extent io tree cleanups lead to performance improvements by
avoiding unnecessary searches or repeated searches
- more efficient extent unpinning when committing transaction
(estimated run time improvement 3-5%)
User visible changes:
- remove standalone mount option 'nologreplay', deprecated in 5.9,
replacement is 'rescue=nologreplay'
- in scrub, update reporting, add back device stats message after
detected errors (accidentally removed during recent refactoring)
Core:
- convert extent buffer radix tree to xarray
- in subpage mode, move block perfect compression out of experimental
build
- in zoned mode, introduce sub block groups to allow managing special
block groups, like the one for relocation or tree-log, to handle
some corner cases of ENOSPC
- in scrub, simplify bitmaps for block tracking status
- continued preparations for large folios:
- remove assertions for folio order 0
- add support where missing: compression, buffered write, defrag,
hole punching, subpage, send
- fix fsync of files with no hard links not persisting deletion
- reject tree blocks which are not nodesize aligned, a precaution
from 4.9 times
- move transaction abort calls closer to the error sites
- remove usage of some struct bio_vec internals
- simplifications in extent map
- extent IO cleanups and optimizations
- error handling improvements
- enhanced ASSERT() macro with optional format strings
- cleanups:
- remove unused code
- naming unifications, dropped __, added prefix
- merge similar functions
- use common helpers for various data structures"
* tag 'for-6.16-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (198 commits)
btrfs: move misplaced comment of btrfs_path::keep_locks
btrfs: remove standalone "nologreplay" mount option
btrfs: use a single variable to track return value at btrfs_page_mkwrite()
btrfs: don't return VM_FAULT_SIGBUS on failure to set delalloc for mmap write
btrfs: simplify early error checking in btrfs_page_mkwrite()
btrfs: pass true to btrfs_delalloc_release_space() at btrfs_page_mkwrite()
btrfs: fix wrong start offset for delalloc space release during mmap write
btrfs: fix harmless race getting delayed ref head count when running delayed refs
btrfs: log error codes during failures when writing super blocks
btrfs: simplify error return logic when getting folio at prepare_one_folio()
btrfs: return real error from __filemap_get_folio() calls
btrfs: remove superfluous return value check at btrfs_dio_iomap_begin()
btrfs: fix invalid data space release when truncating block in NOCOW mode
btrfs: update Kconfig option descriptions
btrfs: update list of features built under experimental config
btrfs: send: remove btrfs_debug() calls
btrfs: use boolean for delalloc argument to btrfs_free_reserved_extent()
btrfs: use boolean for delalloc argument to btrfs_free_reserved_bytes()
btrfs: fold error checks when allocating ordered extent and update comments
btrfs: check we grabbed inode reference when allocating an ordered extent
...
|
|
Pull io_uring updates from Jens Axboe:
- Avoid indirect function calls in io-wq for executing and freeing
work.
The design of io-wq is such that it can be a generic mechanism, but
as it's just used by io_uring now, may as well avoid these indirect
calls
- Clean up registered buffers for networking
- Add support for IORING_OP_PIPE. Pretty straight forward, allows
creating pipes with io_uring, particularly useful for having these be
instantiated as direct descriptors
- Clean up the coalescing support fore registered buffers
- Add support for multiple interface queues for zero-copy rx
networking. As this feature was merged for 6.15 it supported just a
single ifq per ring
- Clean up the eventfd support
- Add dma-buf support to zero-copy rx
- Clean up and improving the request draining support
- Clean up provided buffer support, most notably with an eye toward
making the legacy support less intrusive
- Minor fdinfo cleanups, dropping support for dumping what credentials
are registered
- Improve support for overflow CQE handling, getting rid of GFP_ATOMIC
for allocating overflow entries where possible
- Improve detection of cases where io-wq doesn't need to spawn a new
worker unnecessarily
- Various little cleanups
* tag 'for-6.16/io_uring-20250523' of git://git.kernel.dk/linux: (59 commits)
io_uring/cmd: warn on reg buf imports by ineligible cmds
io_uring/io-wq: only create a new worker if it can make progress
io_uring/io-wq: ignore non-busy worker going to sleep
io_uring/io-wq: move hash helpers to the top
trace/io_uring: fix io_uring_local_work_run ctx documentation
io_uring: finish IOU_OK -> IOU_COMPLETE transition
io_uring: add new helpers for posting overflows
io_uring: pass in struct io_big_cqe to io_alloc_ocqe()
io_uring: make io_alloc_ocqe() take a struct io_cqe pointer
io_uring: split alloc and add of overflow
io_uring: open code io_req_cqe_overflow()
io_uring/fdinfo: get rid of dumping credentials
io_uring/fdinfo: only compile if CONFIG_PROC_FS is set
io_uring/kbuf: unify legacy buf provision and removal
io_uring/kbuf: refactor __io_remove_buffers
io_uring/kbuf: don't compute size twice on prep
io_uring/kbuf: drop extra vars in io_register_pbuf_ring
io_uring/kbuf: use mem_is_zero()
io_uring/kbuf: account ring io_buffer_list memory
io_uring: drain based on allocates reqs
...
|
|
Pull block updates from Jens Axboe:
- ublk updates:
- Add support for updating the size of a ublk instance
- Zero-copy improvements
- Auto-registering of buffers for zero-copy
- Series simplifying and improving GET_DATA and request lookup
- Series adding quiesce support
- Lots of selftests additions
- Various cleanups
- NVMe updates via Christoph:
- add per-node DMA pools and use them for PRP/SGL allocations
(Caleb Sander Mateos, Keith Busch)
- nvme-fcloop refcounting fixes (Daniel Wagner)
- support delayed removal of the multipath node and optionally
support the multipath node for private namespaces (Nilay Shroff)
- support shared CQs in the PCI endpoint target code (Wilfred
Mallawa)
- support admin-queue only authentication (Hannes Reinecke)
- use the crc32c library instead of the crypto API (Eric Biggers)
- misc cleanups (Christoph Hellwig, Marcelo Moreira, Hannes
Reinecke, Leon Romanovsky, Gustavo A. R. Silva)
- MD updates via Yu:
- Fix that normal IO can be starved by sync IO, found by mkfs on
newly created large raid5, with some clean up patches for bdev
inflight counters
- Clean up brd, getting rid of atomic kmaps and bvec poking
- Add loop driver specifically for zoned IO testing
- Eliminate blk-rq-qos calls with a static key, if not enabled
- Improve hctx locking for when a plug has IO for multiple queues
pending
- Remove block layer bouncing support, which in turn means we can
remove the per-node bounce stat as well
- Improve blk-throttle support
- Improve delay support for blk-throttle
- Improve brd discard support
- Unify IO scheduler switching. This should also fix a bunch of lockdep
warnings we've been seeing, after enabling lockdep support for queue
freezing/unfreezeing
- Add support for block write streams via FDP (flexible data placement)
on NVMe
- Add a bunch of block helpers, facilitating the removal of a bunch of
duplicated boilerplate code
- Remove obsolete BLK_MQ pci and virtio Kconfig options
- Add atomic/untorn write support to blktrace
- Various little cleanups and fixes
* tag 'for-6.16/block-20250523' of git://git.kernel.dk/linux: (186 commits)
selftests: ublk: add test for UBLK_F_QUIESCE
ublk: add feature UBLK_F_QUIESCE
selftests: ublk: add test case for UBLK_U_CMD_UPDATE_SIZE
traceevent/block: Add REQ_ATOMIC flag to block trace events
ublk: run auto buf unregisgering in same io_ring_ctx with registering
io_uring: add helper io_uring_cmd_ctx_handle()
ublk: remove io argument from ublk_auto_buf_reg_fallback()
ublk: handle ublk_set_auto_buf_reg() failure correctly in ublk_fetch()
selftests: ublk: add test for covering UBLK_AUTO_BUF_REG_FALLBACK
selftests: ublk: support UBLK_F_AUTO_BUF_REG
ublk: support UBLK_AUTO_BUF_REG_FALLBACK
ublk: register buffer to local io_uring with provided buf index via UBLK_F_AUTO_BUF_REG
ublk: prepare for supporting to register request buffer automatically
ublk: convert to refcount_t
selftests: ublk: make IO & device removal test more stressful
nvme: rename nvme_mpath_shutdown_disk to nvme_mpath_remove_disk
nvme: introduce multipath_always_on module param
nvme-multipath: introduce delayed removal of the multipath head node
nvme-pci: derive and better document max segments limits
nvme-pci: use struct_size for allocation struct nvme_dev
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs selftests updates from Christian Brauner:
"This contains various cleanups, fixes, and extensions for out
filesystem selftests"
* tag 'vfs-6.16-rc1.selftests' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
selftests/fs/mount-notify: add a test variant running inside userns
selftests/filesystems: create setup_userns() helper
selftests/filesystems: create get_unique_mnt_id() helper
selftests/fs/mount-notify: build with tools include dir
selftests/mount_settattr: remove duplicate syscall definitions
selftests/pidfd: move syscall definitions into wrappers.h
selftests/fs/statmount: build with tools include dir
selftests/filesystems: move wrapper.h out of overlayfs subdir
selftests/mount_settattr: ensure that ext4 filesystem can be created
selftests/mount_settattr: add missing STATX_MNT_ID_UNIQUE define
selftests/mount_settattr: don't define sys_open_tree() twice
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull iomap updates from Christian Brauner:
- More fallout and preparatory work associated with the folio batch
prototype posted a while back.
Mainly this just cleans up some of the helpers and pushes some
pos/len trimming further down in the write begin path.
- Add missing flag descriptions to the iomap documentation
* tag 'vfs-6.16-rc1.iomap' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
iomap: rework iomap_write_begin() to return folio offset and length
iomap: push non-large folio check into get folio path
iomap: helper to trim pos/bytes to within folio
iomap: drop pos param from __iomap_[get|put]_folio()
iomap: drop unnecessary pos param from iomap_write_[begin|end]
iomap: resample iter->pos after iomap_write_begin() calls
iomap: trace: Add missing flags to [IOMAP_|IOMAP_F_]FLAGS_STRINGS
Documentation: iomap: Add missing flags description
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull coredump updates from Christian Brauner:
"This adds support for sending coredumps over an AF_UNIX socket. It
also makes (implicit) use of the new SO_PEERPIDFD ability to hand out
pidfds for reaped peer tasks
The new coredump socket will allow userspace to not have to rely on
usermode helpers for processing coredumps and provides a saf way to
handle them instead of relying on super privileged coredumping helpers
This will also be significantly more lightweight since the kernel
doens't have to do a fork()+exec() for each crashing process to spawn
a usermodehelper. Instead the kernel just connects to the AF_UNIX
socket and userspace can process it concurrently however it sees fit.
Support for userspace is incoming starting with systemd-coredump
There's more work coming in that direction next cycle. The rest below
goes into some details and background
Coredumping currently supports two modes:
(1) Dumping directly into a file somewhere on the filesystem.
(2) Dumping into a pipe connected to a usermode helper process
spawned as a child of the system_unbound_wq or kthreadd
For simplicity I'm mostly ignoring (1). There's probably still some
users of (1) out there but processing coredumps in this way can be
considered adventurous especially in the face of set*id binaries
The most common option should be (2) by now. It works by allowing
userspace to put a string into /proc/sys/kernel/core_pattern like:
|/usr/lib/systemd/systemd-coredump %P %u %g %s %t %c %h
The "|" at the beginning indicates to the kernel that a pipe must be
used. The path following the pipe indicator is a path to a binary that
will be spawned as a usermode helper process. Any additional
parameters pass information about the task that is generating the
coredump to the binary that processes the coredump
In the example the core_pattern shown causes the kernel to spawn
systemd-coredump as a usermode helper. There's various conceptual
consequences of this (non-exhaustive list):
- systemd-coredump is spawned with file descriptor number 0 (stdin)
connected to the read-end of the pipe. All other file descriptors
are closed. That specifically includes 1 (stdout) and 2 (stderr).
This has already caused bugs because userspace assumed that this
cannot happen (Whether or not this is a sane assumption is
irrelevant)
- systemd-coredump will be spawned as a child of system_unbound_wq.
So it is not a child of any userspace process and specifically not
a child of PID 1. It cannot be waited upon and is in a weird hybrid
upcall which are difficult for userspace to control correctly
- systemd-coredump is spawned with full kernel privileges. This
necessitates all kinds of weird privilege dropping excercises in
userspace to make this safe
- A new usermode helper has to be spawned for each crashing process
This adds a new mode:
(3) Dumping into an AF_UNIX socket
Userspace can set /proc/sys/kernel/core_pattern to:
@/path/to/coredump.socket
The "@" at the beginning indicates to the kernel that an AF_UNIX
coredump socket will be used to process coredumps
The coredump socket must be located in the initial mount namespace.
When a task coredumps it opens a client socket in the initial network
namespace and connects to the coredump socket:
- The coredump server uses SO_PEERPIDFD to get a stable handle on the
connected crashing task. The retrieved pidfd will provide a stable
reference even if the crashing task gets SIGKILLed while generating
the coredump. That is a huge attack vector right now
- By setting core_pipe_limit non-zero userspace can guarantee that
the crashing task cannot be reaped behind it's back and thus
process all necessary information in /proc/<pid>. The SO_PEERPIDFD
can be used to detect whether /proc/<pid> still refers to the same
process
The core_pipe_limit isn't used to rate-limit connections to the
socket. This can simply be done via AF_UNIX socket directly
- The pidfd for the crashing task will contain information how the
task coredumps. The PIDFD_GET_INFO ioctl gained a new flag
PIDFD_INFO_COREDUMP which can be used to retreive the coredump
information
If the coredump gets a new coredump client connection the kernel
guarantees that PIDFD_INFO_COREDUMP information is available.
Currently the following information is provided in the new
@coredump_mask extension to struct pidfd_info:
* PIDFD_COREDUMPED is raised if the task did actually coredump
* PIDFD_COREDUMP_SKIP is raised if the task skipped coredumping
(e.g., undumpable)
* PIDFD_COREDUMP_USER is raised if this is a regular coredump and
doesn't need special care by the coredump server
* PIDFD_COREDUMP_ROOT is raised if the generated coredump should
be treated as sensitive and the coredump server should restrict
access to the generated coredump to sufficiently privileged
users"
* tag 'vfs-6.16-rc1.coredump' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
mips, net: ensure that SOCK_COREDUMP is defined
selftests/coredump: add tests for AF_UNIX coredumps
selftests/pidfd: add PIDFD_INFO_COREDUMP infrastructure
coredump: validate socket name as it is written
coredump: show supported coredump modes
pidfs, coredump: add PIDFD_INFO_COREDUMP
coredump: add coredump socket
coredump: reflow dump helpers a little
coredump: massage do_coredump()
coredump: massage format_corename()
|
