| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"This round of clk driver and framework updates is heavy on the driver
update side. The two main highlights in the core framework are the
addition of an bulk clk_get API that handles optional clks and an
extra debugfs file that tells the developer about the current parent
of a clk.
The driver updates are dominated by i.MX in the diffstat, but that is
mostly because that SoC has started converting to the clk_hw style of
clk registration. The next big update is in the Amlogic meson clk
driver that gained some support for audio, cpu, and temperature clks
while fixing some PLL issues. Finally, the biggest thing that stands
out is the conversion of a large part of the Allwinner sunxi-ng driver
to the new clk parent scheme that uses less strings and more pointer
comparisons to match clk parents and children up.
In general, it looks like we have a lot of little fixes and tweaks
here and there to clk data along with the normal addition of a handful
of new drivers and a couple new core framework features.
Core:
- Add a 'clk_parent' file in clk debugfs
- Add a clk_bulk_get_optional() API (with devm too)
New Drivers:
- Support gated clk controller on MIPS based BCM63XX SoCs
- Support SiLabs Si5341 and Si5340 chips
- Support for CPU clks on Raspberry Pi devices
- Audsys clock driver for MediaTek MT8516 SoCs
Updates:
- Convert a large portion of the Allwinner sunxi-ng driver to new clk parent scheme
- Small frequency support for SiLabs Si544 chips
- Slow clk support for AT91 SAM9X60 SoCs
- Remove dead code in various clk drivers (-Wunused)
- Support for Marvell 98DX1135 SoCs
- Get duty cycle of generic pwm clks
- Improvement in mmc phase calculation and cleanup of some rate defintions
- Switch i.MX6 and i.MX7 clock drivers to clk_hw based APIs
- Add GPIO, SNVS and GIC clocks for i.MX8 drivers
- Mark imx6sx/ul/ull/sll MMDC_P1_IPG and imx8mm DRAM_APB as critical clock
- Correct imx7ulp nic1_bus_clk and imx8mm audio_pll2_clk clock setting
- Add clks for new Exynos5422 Dynamic Memory Controller driver
- Clock definition for Exynos4412 Mali
- Add CMM (Color Management Module) clocks on Renesas R-Car H3, M3-N, E3, and D3
- Add TPU (Timer Pulse Unit / PWM) clocks on Renesas RZ/G2M
- Support for 32 bit clock IDs in TI's sci-clks for J721e SoCs
- TI clock probing done from DT by default instead of firmware
- Fix Amlogic Meson mpll fractional part and spread sprectrum issues
- Add Amlogic meson8 audio clocks
- Add Amlogic g12a temperature sensors clocks
- Add Amlogic g12a and g12b cpu clocks
- Add TPU (Timer Pulse Unit / PWM) clocks on Renesas R-Car H3, M3-W, and M3-N
- Add CMM (Color Management Module) clocks on Renesas R-Car M3-W
- Add Clock Domain support on Renesas RZ/N1"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (190 commits)
clk: consoldiate the __clk_get_hw() declarations
clk: sprd: Add check for return value of sprd_clk_regmap_init()
clk: lochnagar: Update DT binding doc to include the primary SPDIF MCLK
clk: Add Si5341/Si5340 driver
dt-bindings: clock: Add silabs,si5341
clk: clk-si544: Implement small frequency change support
clk: add BCM63XX gated clock controller driver
devicetree: document the BCM63XX gated clock bindings
clk: at91: sckc: use dedicated functions to unregister clock
clk: at91: sckc: improve error path for sama5d4 sck registration
clk: at91: sckc: remove unnecessary line
clk: at91: sckc: improve error path for sam9x5 sck register
clk: at91: sckc: add support to free slow clock osclillator
clk: at91: sckc: add support to free slow rc oscillator
clk: at91: sckc: add support to free slow oscillator
clk: rockchip: export HDMIPHY clock on rk3228
clk: rockchip: add watchdog pclk on rk3328
clk: rockchip: add clock id for hdmi_phy special clock on rk3228
clk: rockchip: add clock id for watchdog pclk on rk3328
clk: at91: sckc: add support for SAM9X60
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"A quiet cycle this time.
- ds1307: properly handle oscillator failure flags
- imx-sc: alarm support
- pcf2123: alarm support, correct offset handling
- sun6i: add R40 support
- simplify getting the adapter of an i2c client"
* tag 'rtc-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (37 commits)
rtc: wm831x: Add IRQF_ONESHOT flag
rtc: stm32: remove one condition check in stm32_rtc_set_alarm()
rtc: pcf2123: Fix build error
rtc: interface: Change type of 'count' from int to u64
rtc: pcf8563: Clear event flags and disable interrupts before requesting irq
rtc: pcf8563: Fix interrupt trigger method
rtc: pcf2123: fix negative offset rounding
rtc: pcf2123: add alarm support
rtc: pcf2123: use %ptR
rtc: pcf2123: port to regmap
rtc: pcf2123: remove sysfs register view
rtc: rx8025: simplify getting the adapter of a client
rtc: rx8010: simplify getting the adapter of a client
rtc: rv8803: simplify getting the adapter of a client
rtc: m41t80: simplify getting the adapter of a client
rtc: fm3130: simplify getting the adapter of a client
rtc: tegra: Drop MODULE_ALIAS
rtc: sun6i: Add R40 compatible
dt-bindings: rtc: sun6i: Add the R40 RTC compatible
dt-bindings: rtc: Convert Allwinner A31 RTC to a schema
...
|
|
Pull dmaengine updates from Vinod Koul:
- Add support in dmaengine core to do device node checks for DT devices
and update bunch of drivers to use that and remove open coding from
drivers
- New driver/driver support for new hardware, namely:
- MediaTek UART APDMA
- Freescale i.mx7ulp edma2
- Synopsys eDMA IP core version 0
- Allwinner H6 DMA
- Updates to axi-dma and support for interleaved cyclic transfers
- Greg's debugfs return value check removals on drivers
- Updates to stm32-dma, hsu, dw, pl330, tegra drivers
* tag 'dmaengine-5.3-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (68 commits)
dmaengine: Revert "dmaengine: fsl-edma: add i.mx7ulp edma2 version support"
dmaengine: at_xdmac: check for non-empty xfers_list before invoking callback
Documentation: dmaengine: clean up description of dmatest usage
dmaengine: tegra210-adma: remove PM_CLK dependency
dmaengine: fsl-edma: add i.mx7ulp edma2 version support
dt-bindings: dma: fsl-edma: add new i.mx7ulp-edma
dmaengine: fsl-edma-common: version check for v2 instead
dmaengine: fsl-edma-common: move dmamux register to another single function
dmaengine: fsl-edma: add drvdata for fsl-edma
dmaengine: Revert "dmaengine: fsl-edma: support little endian for edma driver"
dmaengine: rcar-dmac: Reject zero-length slave DMA requests
dmaengine: dw: Enable iDMA 32-bit on Intel Elkhart Lake
dmaengine: dw-edma: fix semicolon.cocci warnings
dmaengine: sh: usb-dmac: Use [] to denote a flexible array member
dmaengine: dmatest: timeout value of -1 should specify infinite wait
dmaengine: dw: Distinguish ->remove() between DW and iDMA 32-bit
dmaengine: fsl-edma: support little endian for edma driver
dmaengine: hsu: Revert "set HSU_CH_MTSR to memory width"
dmagengine: pl330: add code to get reset property
dt-bindings: pl330: document the optional resets property
...
|
|
Pull MIPS updates from Paul Burton:
"A light batch this time around but significant improvements for
certain systems:
- Removal of readq & writeq for MIPS32 kernels where they would
simply BUG() anyway, allowing drivers or other code that #ifdefs on
their presence to work properly.
- Improvements for Ingenic JZ4740 systems, including support for the
external memory controller & pinmuxing fixes for qi_lb60/NanoNote
systems.
- Improvements for Lantiq systems, in particular around SMP & IPIs.
- DT updates for ralink/MediaTek MT7628a systems to probe & configure
a bunch more devices.
- Miscellaneous cleanups & build fixes"
* tag 'mips_5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (30 commits)
MIPS: fix some more fall through errors in arch/mips
MIPS: perf events: handle switch statement falling through warnings
mips/kprobes: Export kprobe_fault_handler()
MAINTAINERS: Add myself as Ingenic SoCs maintainer
MIPS: ralink: mt7628a.dtsi: Add watchdog controller DT node
MIPS: ralink: mt7628a.dtsi: Add SPI controller DT node
MIPS: ralink: mt7628a.dtsi: Add GPIO controller DT node
MIPS: ralink: mt7628a.dtsi: Add pinctrl DT properties to the UART nodes
MIPS: ralink: mt7628a.dtsi: Add pinmux DT node
MIPS: ralink: mt7628a.dtsi: Add SPDX GPL-2.0 license identifier
MIPS: lantiq: Add SMP support for lantiq interrupt controller
MIPS: lantiq: Shorten register names, remove unused macros
MIPS: lantiq: Fix bitfield masking
MIPS: lantiq: Remove unused macros
MIPS: lantiq: Fix attributes of of_device_id structure
MIPS: lantiq: Change variables to the same type as the source
MIPS: lantiq: Move macro directly to iomem function
mips: Remove q-accessors from non-64bit platforms
FDDI: defza: Include linux/io-64-nonatomic-lo-hi.h
MIPS: configs: Remove useless UEVENT_HELPER_PATH
...
|
|
git://git.sourceforge.jp/gitroot/uclinux-h8/linux
Pull h8300 update from Yoshinori Sato:
"Remove unused barrier defines"
* tag 'h8300-for-linus-20190617' of git://git.sourceforge.jp/gitroot/uclinux-h8/linux:
H8300: remove unused barrier defines
|
|
git://git.sourceforge.jp/gitroot/uclinux-h8/linux
Pull SH updates from Yoshinori Sato.
kprobe fix, defconfig updates and a SH Kconfig fix.
* tag 'for-linus-20190617' of git://git.sourceforge.jp/gitroot/uclinux-h8/linux:
arch/sh: Check for kprobe trap number before trying to handle a kprobe trap
sh: configs: Remove useless UEVENT_HELPER_PATH
Fix allyesconfig output.
|
|
The Asus WMI spec indicates that the function being controlled here
is called "Fan Boost Mode". The user-facing documentation also calls it
this.
The spec uses the term "fan mode" is used to refer to other things,
including functionality expected to appear on future products.
We missed this before as we are not dealing with the most readable of
specs, and didn't forsee any confusion around shortening the name.
Rename "fan mode" to "fan boost mode" to improve consistency with the
spec and to avoid a future naming conflict.
There is no interface breakage here since this has yet to be included
in an official kernel release. I also updated the kernel version listed
under ABI accordingly.
Signed-off-by: Daniel Drake <drake@endlessm.com>
Acked-by: Yurii Pavlovskyi <yurii.pavlovskyi@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Merge more updates from Andrew Morton:
"VM:
- z3fold fixes and enhancements by Henry Burns and Vitaly Wool
- more accurate reclaimed slab caches calculations by Yafang Shao
- fix MAP_UNINITIALIZED UAPI symbol to not depend on config, by
Christoph Hellwig
- !CONFIG_MMU fixes by Christoph Hellwig
- new novmcoredd parameter to omit device dumps from vmcore, by
Kairui Song
- new test_meminit module for testing heap and pagealloc
initialization, by Alexander Potapenko
- ioremap improvements for huge mappings, by Anshuman Khandual
- generalize kprobe page fault handling, by Anshuman Khandual
- device-dax hotplug fixes and improvements, by Pavel Tatashin
- enable synchronous DAX fault on powerpc, by Aneesh Kumar K.V
- add pte_devmap() support for arm64, by Robin Murphy
- unify locked_vm accounting with a helper, by Daniel Jordan
- several misc fixes
core/lib:
- new typeof_member() macro including some users, by Alexey Dobriyan
- make BIT() and GENMASK() available in asm, by Masahiro Yamada
- changed LIST_POISON2 on x86_64 to 0xdead000000000122 for better
code generation, by Alexey Dobriyan
- rbtree code size optimizations, by Michel Lespinasse
- convert struct pid count to refcount_t, by Joel Fernandes
get_maintainer.pl:
- add --no-moderated switch to skip moderated ML's, by Joe Perches
misc:
- ptrace PTRACE_GET_SYSCALL_INFO interface
- coda updates
- gdb scripts, various"
[ Using merge message suggestion from Vlastimil Babka, with some editing - Linus ]
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (100 commits)
fs/select.c: use struct_size() in kmalloc()
mm: add account_locked_vm utility function
arm64: mm: implement pte_devmap support
mm: introduce ARCH_HAS_PTE_DEVMAP
mm: clean up is_device_*_page() definitions
mm/mmap: move common defines to mman-common.h
mm: move MAP_SYNC to asm-generic/mman-common.h
device-dax: "Hotremove" persistent memory that is used like normal RAM
mm/hotplug: make remove_memory() interface usable
device-dax: fix memory and resource leak if hotplug fails
include/linux/lz4.h: fix spelling and copy-paste errors in documentation
ipc/mqueue.c: only perform resource calculation if user valid
include/asm-generic/bug.h: fix "cut here" for WARN_ON for __WARN_TAINT architectures
scripts/gdb: add helpers to find and list devices
scripts/gdb: add lx-genpd-summary command
drivers/pps/pps.c: clear offset flags in PPS_SETPARAMS ioctl
kernel/pid.c: convert struct pid count to refcount_t
drivers/rapidio/devices/rio_mport_cdev.c: NUL terminate some strings
select: shift restore_saved_sigmask_unless() into poll_select_copy_remaining()
select: change do_poll() to return -ERESTARTNOHAND rather than -EINTR
...
|
|
Currently, kcopyd has a sub-job size of 64KB and a maximum number of 8
sub-jobs. As a result, for any kcopyd job, we have a maximum of 512KB of
I/O in flight.
This upper limit to the amount of in-flight I/O under-utilizes fast
devices and results in decreased throughput, e.g., when writing to a
snapshotted thin LV with I/O size less than the pool's block size (so
COW is performed using kcopyd).
Increase kcopyd's default sub-job size to 512KB, so we have a maximum of
4MB of I/O in flight for each kcopyd job. This results in an up to 96%
improvement of bandwidth when writing to a snapshotted thin LV, with I/O
sizes less than the pool's block size.
Also, add dm_mod.kcopyd_subjob_size_kb module parameter to allow users
to fine tune the sub-job size of kcopyd. The default value of this
parameter is 512KB and the maximum allowed value is 1024KB.
We evaluate the performance impact of the change by running the
snap_breaking_throughput benchmark, from the device mapper test suite
[1].
The benchmark:
1. Creates a 1G thin LV
2. Provisions the thin LV
3. Takes a snapshot of the thin LV
4. Writes to the thin LV with:
dd if=/dev/zero of=/dev/vg/thin_lv oflag=direct bs=<I/O size>
Running this benchmark with various thin pool block sizes and dd I/O
sizes (all combinations triggering the use of kcopyd) we get the
following results:
+-----------------+-------------+------------------+-----------------+
| Pool block size | dd I/O size | BW before (MB/s) | BW after (MB/s) |
+-----------------+-------------+------------------+-----------------+
| 1 MB | 256 KB | 242 | 280 |
| 1 MB | 512 KB | 238 | 295 |
| | | | |
| 2 MB | 256 KB | 238 | 354 |
| 2 MB | 512 KB | 241 | 380 |
| 2 MB | 1 MB | 245 | 394 |
| | | | |
| 4 MB | 256 KB | 248 | 412 |
| 4 MB | 512 KB | 234 | 432 |
| 4 MB | 1 MB | 251 | 474 |
| 4 MB | 2 MB | 257 | 504 |
| | | | |
| 8 MB | 256 KB | 239 | 420 |
| 8 MB | 512 KB | 256 | 431 |
| 8 MB | 1 MB | 264 | 467 |
| 8 MB | 2 MB | 264 | 502 |
| 8 MB | 4 MB | 281 | 537 |
+-----------------+-------------+------------------+-----------------+
[1] https://github.com/jthornber/device-mapper-test-suite
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
__find_snapshots_sharing_cow() should always be used with _origins_lock
held so fix snapshot_io_hints() accordingly. Also, once a snapshot is
being merged discards must not be allowed -- otherwise incorrect or
duplicate work will be performed.
Fixes: 2e6023850e177d ("dm snapshot: add optional discard support features")
Reported-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
dm-zoned uses the zone flag DMZ_ACTIVE to indicate that a zone of the
backend device is being actively read or written and so cannot be
reclaimed. This flag is set as long as the zone atomic reference
counter is not 0. When this atomic is decremented and reaches 0 (e.g.
on BIO completion), the active flag is cleared and set again whenever
the zone is reused and BIO issued with the atomic counter incremented.
These 2 operations (atomic inc/dec and flag set/clear) are however not
always executed atomically under the target metadata mutex lock and
this causes the warning:
WARN_ON(!test_bit(DMZ_ACTIVE, &zone->flags));
in dmz_deactivate_zone() to be displayed. This problem is regularly
triggered with xfstests generic/209, generic/300, generic/451 and
xfs/077 with XFS being used as the file system on the dm-zoned target
device. Similarly, xfstests ext4/303, ext4/304, generic/209 and
generic/300 trigger the warning with ext4 use.
This problem can be easily fixed by simply removing the DMZ_ACTIVE flag
and managing the "ACTIVE" state by directly looking at the reference
counter value. To do so, the functions dmz_activate_zone() and
dmz_deactivate_zone() are changed to inline functions respectively
calling atomic_inc() and atomic_dec(), while the dmz_is_active() macro
is changed to an inline function calling atomic_read().
Fixes: 3b1a94c88b79 ("dm zoned: drive-managed zoned block device target")
Cc: stable@vger.kernel.org
Reported-by: Masato Suzuki <masato.suzuki@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Move internal function declarations out of fs/internal.h into
include/linux/iomap.h so that our transition is complete.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Move the main iteration code into a separate file so that we can group
related functions in a single file instead of having a single enormous
source file.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Move the buffered IO code into a separate file so that we can group
related functions in a single file instead of having a single enormous
source file.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Move the direct IO code into a separate file so that we can group
related functions in a single file instead of having a single enormous
source file.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Move the SEEK_HOLE/SEEK_DATA code into a separate file so that we can
group related functions in a single file instead of having a single
enormous source file.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Move the file mapping reporting code (FIEMAP/FIBMAP) into a separate
file so that we can group related functions in a single file instead of
having a single enormous source file.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Move the swapfile activation code into a separate file so that we can
group related functions in a single file instead of having a single
enormous source file.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Commit 7457c0da024b ("x86/alternatives: Add int3_emulate_call()
selftest") is used to ensure there is a gap setup in int3 exception stack
which could be used for inserting call return address.
This gap is missed in XEN PV int3 exception entry path, then below panic
triggered:
[ 0.772876] general protection fault: 0000 [#1] SMP NOPTI
[ 0.772886] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.2.0+ #11
[ 0.772893] RIP: e030:int3_magic+0x0/0x7
[ 0.772905] RSP: 3507:ffffffff82203e98 EFLAGS: 00000246
[ 0.773334] Call Trace:
[ 0.773334] alternative_instructions+0x3d/0x12e
[ 0.773334] check_bugs+0x7c9/0x887
[ 0.773334] ? __get_locked_pte+0x178/0x1f0
[ 0.773334] start_kernel+0x4ff/0x535
[ 0.773334] ? set_init_arg+0x55/0x55
[ 0.773334] xen_start_kernel+0x571/0x57a
For 64bit PV guests, Xen's ABI enters the kernel with using SYSRET, with
%rcx/%r11 on the stack. To convert back to "normal" looking exceptions,
the xen thunks do 'xen_*: pop %rcx; pop %r11; jmp *'.
E.g. Extracting 'xen_pv_trap xenint3' we have:
xen_xenint3:
pop %rcx;
pop %r11;
jmp xenint3
As xenint3 and int3 entry code are same except xenint3 doesn't generate
a gap, we can fix it by using int3 and drop useless xenint3.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
PVH guest needs PV extentions to work, so "nopv" parameter should be
ignored for PVH but not for HVM guest.
If PVH guest boots up via the Xen-PVH boot entry, xen_pvh is set early,
we know it's PVH guest and ignore "nopv" parameter directly.
If PVH guest boots up via the normal boot entry same as HVM guest, it's
hard to distinguish PVH and HVM guest at that time. In this case, we
have to panic early if PVH is detected and nopv is enabled to avoid a
worse situation later.
Remove static from bool_x86_init_noop/x86_op_int_noop so they could be
used globally. Move xen_platform_hvm() after xen_hvm_guest_late_init()
to avoid compile error.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
.. as "nopv" support needs it to be changeable at boot up stage.
Checkpatch reports warning, so move variable declarations from
hypervisor.c to hypervisor.h
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Clean up unnecessory code after that operation.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
In virtualization environment, PV extensions (drivers, interrupts,
timers, etc) are enabled in the majority of use cases which is the
best option.
However, in some cases (kexec not fully working, benchmarking)
we want to disable PV extensions. We have "xen_nopv" for that purpose
but only for XEN. For a consistent admin experience a common command
line parameter "nopv" set across all PV guest implementations is a
better choice.
There are guest types which just won't work without PV extensions,
like Xen PV, Xen PVH and jailhouse. add a "ignore_nopv" member to
struct hypervisor_x86 set to true for those guest types and call
the detect functions only if nopv is false or ignore_nopv is true.
Suggested-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
.. as they are only called at early bootup stage. In fact, other
functions in x86_hyper_xen_hvm.init.* are all marked as __init.
Unexport xen_hvm_need_lapic as it's never used outside.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
The Xen tmem (transcendent memory) driver can be removed, as the
related Xen hypervisor feature never made it past the "experimental"
state and will be removed in future Xen versions (>= 4.13).
The xen-selfballoon driver depends on tmem, so it can be removed, too.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
initialized"
This reverts commit ca5d376e17072c1b60c3fee66f3be58ef018952d.
Commit 8990cac6e5ea ("x86/jump_label: Initialize static branching
early") adds jump_label_init() call in setup_arch() to make static
keys initialized early, so we could use the original simpler code
again.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
When binding an interdomain event channel to a vcpu via
IOCTL_EVTCHN_BIND_INTERDOMAIN not only the event channel needs to be
bound, but the affinity of the associated IRQi must be changed, too.
Otherwise the IRQ and the event channel won't be moved to another vcpu
in case the original vcpu they were bound to is going offline.
Cc: <stable@vger.kernel.org> # 4.13
Fixes: c48f64ab472389df ("xen-evtchn: Bind dyn evtchn:qemu-dm interrupt to next online VCPU")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
This patch fixes below sparse warning related to __virtio
type in virtio pmem driver. This is reported by Intel test
bot on linux-next tree.
nd_virtio.c:56:28: warning: incorrect type in assignment
(different base types)
nd_virtio.c:56:28: expected unsigned int [unsigned] [usertype] type
nd_virtio.c:56:28: got restricted __virtio32
nd_virtio.c:93:59: warning: incorrect type in argument 2
(different base types)
nd_virtio.c:93:59: expected restricted __virtio32 [usertype] val
nd_virtio.c:93:59: got unsigned int [unsigned] [usertype] ret
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Pankaj Gupta <pagupta@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
RocksDB can hang indefinitely when using a DAX file. This is due to
a bug in the XArray conversion when handling a PMD fault and finding a
PTE entry. We use the wrong index in the hash and end up waiting on
the wrong waitqueue.
There's actually no need to wait; if we find a PTE entry while looking
for a PMD entry, we can return immediately as we know we should fall
back to a PTE fault (which may not conflict with the lock held).
We reuse the XA_RETRY_ENTRY to signal a conflicting entry was found.
This value can never be found in an XArray while holding its lock, so
it does not create an ambiguity.
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/CAPcyv4hwHpX-MkUEqxwdTj7wCCZCN4RV-L4jsnuwLGyL_UEG4A@mail.gmail.com
Fixes: b15cd800682f ("dax: Convert page fault handlers to XArray")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Dan Williams <dan.j.williams@intel.com>
Reported-by: Robert Barror <robert.barror@intel.com>
Reported-by: Seema Pandit <seema.pandit@intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:
struct foo {
int stuff;
struct boo entry[];
};
size = sizeof(struct foo) + count * sizeof(struct boo);
instance = kmalloc(size, GFP_KERNEL);
Instead of leaving these open-coded and prone to type mistakes, we can now
use the new struct_size() helper:
instance = kmalloc(struct_size(instance, entry, count), GFP_KERNEL);
Also, notice that variable size is unnecessary, hence it is removed.
This code was detected with the help of Coccinelle.
Link: http://lkml.kernel.org/r/20190604164226.GA13823@embeddedor
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
locked_vm accounting is done roughly the same way in five places, so
unify them in a helper.
Include the helper's caller in the debug print to distinguish between
callsites.
Error codes stay the same, so user-visible behavior does too. The one
exception is that the -EPERM case in tce_account_locked_vm is removed
because Alexey has never seen it triggered.
[daniel.m.jordan@oracle.com: v3]
Link: http://lkml.kernel.org/r/20190529205019.20927-1-daniel.m.jordan@oracle.com
[sfr@canb.auug.org.au: fix mm/util.c]
Link: http://lkml.kernel.org/r/20190524175045.26897-1-daniel.m.jordan@oracle.com
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Cc: Alan Tull <atull@kernel.org>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Moritz Fischer <mdf@kernel.org>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Steve Sistare <steven.sistare@oracle.com>
Cc: Wu Hao <hao.wu@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In order for things like get_user_pages() to work on ZONE_DEVICE memory,
we need a software PTE bit to identify device-backed PFNs. Hook this up
along with the relevant helpers to join in with ARCH_HAS_PTE_DEVMAP.
[robin.murphy@arm.com: build fixes]
Link: http://lkml.kernel.org/r/13026c4e64abc17133bbfa07d7731ec6691c0bcd.1559050949.git.robin.murphy@arm.com
Link: http://lkml.kernel.org/r/817d92886fc3b33bcbf6e105ee83a74babb3a5aa.1558547956.git.robin.murphy@arm.com
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
ARCH_HAS_ZONE_DEVICE is somewhat meaningless in itself, and combined
with the long-out-of-date comment can lead to the impression than an
architecture may just enable it (since __add_pages() now "comprehends
device memory" for itself) and expect things to work.
In practice, however, ZONE_DEVICE users have little chance of
functioning correctly without __HAVE_ARCH_PTE_DEVMAP, so let's clean
that up the same way as ARCH_HAS_PTE_SPECIAL and make it the proper
dependency so the real situation is clearer.
Link: http://lkml.kernel.org/r/87554aa78478a02a63f2c4cf60a847279ae3eb3b.1558547956.git.robin.murphy@arm.com
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Refactor is_device_{public,private}_page() with is_pci_p2pdma_page() to
make them all consistent in depending on their respective config options
even when CONFIG_DEV_PAGEMAP_OPS is enabled for other reasons. This
allows a little more compile-time optimisation as well as the conceptual
and cosmetic cleanup.
Link: http://lkml.kernel.org/r/187c2ab27dea70635d375a61b2f2076d26c032b0.1558547956.git.robin.murphy@arm.com
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Suggested-by: Jerome Glisse <jglisse@redhat.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oliver O'Halloran <oohall@gmail.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Two architecture that use arch specific MMAP flags are powerpc and
sparc. We still have few flag values common across them and other
architectures. Consolidate this in mman-common.h.
Also update the comment to indicate where to find HugeTLB specific
reserved values
Link: http://lkml.kernel.org/r/20190604090950.31417-1-aneesh.kumar@linux.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This enables support for synchronous DAX fault on powerpc
The generic changes are added as part of b6fb293f2497 ("mm: Define
MAP_SYNC and VM_SYNC flags")
Without this, mmap returns EOPNOTSUPP for MAP_SYNC with
MAP_SHARED_VALIDATE
Instead of adding MAP_SYNC with same value to
arch/powerpc/include/uapi/asm/mman.h, I am moving the #define to
asm-generic/mman-common.h. Two architectures using mman-common.h
directly are sparc and powerpc. We should be able to consloidate more
#defines to mman-common.h. That can be done as a separate patch.
Link: http://lkml.kernel.org/r/20190528091120.13322-1-aneesh.kumar@linux.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
It is now allowed to use persistent memory like a regular RAM, but
currently there is no way to remove this memory until machine is
rebooted.
This work expands the functionality to also allows hotremoving
previously hotplugged persistent memory, and recover the device for use
for other purposes.
To hotremove persistent memory, the management software must first
offline all memory blocks of dax region, and than unbind it from
device-dax/kmem driver. So, operations should look like this:
echo offline > /sys/devices/system/memory/memoryN/state
...
echo dax0.0 > /sys/bus/dax/drivers/kmem/unbind
Note: if unbind is done without offlining memory beforehand, it won't be
possible to do dax0.0 hotremove, and dax's memory is going to be part of
System RAM until reboot.
Link: http://lkml.kernel.org/r/20190517215438.6487-4-pasha.tatashin@soleen.com
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: James Morris <jmorris@namei.org>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ross Zwisler <zwisler@kernel.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Yaowei Bai <baiyaowei@cmss.chinamobile.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Presently the remove_memory() interface is inherently broken. It tries
to remove memory but panics if some memory is not offline. The problem
is that it is impossible to ensure that all memory blocks are offline as
this function also takes lock_device_hotplug that is required to change
memory state via sysfs.
So, between calling this function and offlining all memory blocks there
is always a window when lock_device_hotplug is released, and therefore,
there is always a chance for a panic during this window.
Make this interface to return an error if memory removal fails. This
way it is safe to call this function without panicking machine, and also
makes it symmetric to add_memory() which already returns an error.
Link: http://lkml.kernel.org/r/20190517215438.6487-3-pasha.tatashin@soleen.com
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: James Morris <jmorris@namei.org>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Ross Zwisler <zwisler@kernel.org>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Yaowei Bai <baiyaowei@cmss.chinamobile.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series ""Hotremove" persistent memory", v6.
Recently, adding a persistent memory to be used like a regular RAM was
added to Linux. This work extends this functionality to also allow hot
removing persistent memory.
We (Microsoft) have an important use case for this functionality.
The requirement is for physical machines with small amount of RAM (~8G)
to be able to reboot in a very short period of time (<1s). Yet, there
is a userland state that is expensive to recreate (~2G).
The solution is to boot machines with 2G preserved for persistent
memory.
Copy the state, and hotadd the persistent memory so machine still has
all 8G available for runtime. Before reboot, offline and hotremove
device-dax 2G, copy the memory that is needed to be preserved to pmem0
device, and reboot.
The series of operations look like this:
1. After boot restore /dev/pmem0 to ramdisk to be consumed by apps.
and free ramdisk.
2. Convert raw pmem0 to devdax
ndctl create-namespace --mode devdax --map mem -e namespace0.0 -f
3. Hotadd to System RAM
echo dax0.0 > /sys/bus/dax/drivers/device_dax/unbind
echo dax0.0 > /sys/bus/dax/drivers/kmem/new_id
echo online_movable > /sys/devices/system/memoryXXX/state
4. Before reboot hotremove device-dax memory from System RAM
echo offline > /sys/devices/system/memoryXXX/state
echo dax0.0 > /sys/bus/dax/drivers/kmem/unbind
5. Create raw pmem0 device
ndctl create-namespace --mode raw -e namespace0.0 -f
6. Copy the state that was stored by apps to ramdisk to pmem device
7. Do kexec reboot or reboot through firmware if firmware does not
zero memory in pmem0 region (These machines have only regular
volatile memory). So to have pmem0 device either memmap kernel
parameter is used, or devices nodes in dtb are specified.
This patch (of 3):
When add_memory() fails, the resource and the memory should be freed.
Link: http://lkml.kernel.org/r/20190517215438.6487-2-pasha.tatashin@soleen.com
Fixes: c221c0b0308f ("device-dax: "Hotplug" persistent memory for use like normal RAM")
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Dave Hansen <dave.hansen@intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: James Morris <jmorris@namei.org>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Ross Zwisler <zwisler@kernel.org>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Yaowei Bai <baiyaowei@cmss.chinamobile.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fix a few spelling and grammar errors, and two places where fast/safe in
the documentation did not match the function.
Link: http://lkml.kernel.org/r/20190321014452.13297-1-tomlevy93@gmail.com
Signed-off-by: Tom Levy <tomlevy93@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Kosina <trivial@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Andreas Christoforou reported:
UBSAN: Undefined behaviour in ipc/mqueue.c:414:49 signed integer overflow:
9 * 2305843009213693951 cannot be represented in type 'long int'
...
Call Trace:
mqueue_evict_inode+0x8e7/0xa10 ipc/mqueue.c:414
evict+0x472/0x8c0 fs/inode.c:558
iput_final fs/inode.c:1547 [inline]
iput+0x51d/0x8c0 fs/inode.c:1573
mqueue_get_inode+0x8eb/0x1070 ipc/mqueue.c:320
mqueue_create_attr+0x198/0x440 ipc/mqueue.c:459
vfs_mkobj+0x39e/0x580 fs/namei.c:2892
prepare_open ipc/mqueue.c:731 [inline]
do_mq_open+0x6da/0x8e0 ipc/mqueue.c:771
Which could be triggered by:
struct mq_attr attr = {
.mq_flags = 0,
.mq_maxmsg = 9,
.mq_msgsize = 0x1fffffffffffffff,
.mq_curmsgs = 0,
};
if (mq_open("/testing", 0x40, 3, &attr) == (mqd_t) -1)
perror("mq_open");
mqueue_get_inode() was correctly rejecting the giant mq_msgsize, and
preparing to return -EINVAL. During the cleanup, it calls
mqueue_evict_inode() which performed resource usage tracking math for
updating "user", before checking if there was a valid "user" at all
(which would indicate that the calculations would be sane). Instead,
delay this check to after seeing a valid "user".
The overflow was real, but the results went unused, so while the flaw is
harmless, it's noisy for kernel fuzzers, so just fix it by moving the
calculation under the non-NULL "user" where it actually gets used.
Link: http://lkml.kernel.org/r/201906072207.ECB65450@keescook
Signed-off-by: Kees Cook <keescook@chromium.org>
Reported-by: Andreas Christoforou <andreaschristofo@gmail.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
architectures
For architectures using __WARN_TAINT, the WARN_ON macro did not print
out the "cut here" string. The other WARN_XXX macros would print "cut
here" inside __warn_printk, which is not called for WARN_ON since it
doesn't have a message to print.
Link: http://lkml.kernel.org/r/20190624154831.163888-1-ddavenport@chromium.org
Fixes: a7bed27af194 ("bug: fix "cut here" location for __WARN_TAINT architectures")
Signed-off-by: Drew Davenport <ddavenport@chromium.org>
Acked-by: Kees Cook <keescook@chromium.org>
Tested-by: Kees Cook <keescook@chromium.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add helper commands and functions for finding pointers to struct device
by enumerating linux device bus/class infrastructure. This can be used
to fetch subsystem and driver-specific structs:
(gdb) p *$container_of($lx_device_find_by_class_name("net", "eth0"), "struct net_device", "dev")
(gdb) p *$container_of($lx_device_find_by_bus_name("i2c", "0-004b"), "struct i2c_client", "dev")
(gdb) p *(struct imx_port*)$lx_device_find_by_class_name("tty", "ttymxc1")->parent->driver_data
Several generic "lx-device-list" functions are included to enumerate
devices by bus and class:
(gdb) lx-device-list-bus usb
(gdb) lx-device-list-class
(gdb) lx-device-list-tree &platform_bus
Similar information is available in /sys but pointer values are
deliberately hidden.
Link: http://lkml.kernel.org/r/c948628041311cbf1b9b4cff3dda7d2073cb3eaa.1561492937.git.leonard.crestez@nxp.com
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is like /sys/kernel/debug/pm/pm_genpd_summary except it's
accessible through a debugger.
This can be useful if the target crashes or hangs because power domains
were not properly enabled.
Link: http://lkml.kernel.org/r/f9ee627a0d4f94b894aa202fee8a98444049bed8.1561492937.git.leonard.crestez@nxp.com
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The PPS assert/clear offset corrections are set by the PPS_SETPARAMS
ioctl in the pps_ktime structs, which also contain flags. The flags are
not initialized by applications (using the timepps.h header) and they
are not used by the kernel for anything except returning them back in
the PPS_GETPARAMS ioctl.
Set the flags to zero to make it clear they are unused and avoid leaking
uninitialized data of the PPS_SETPARAMS caller to other applications
that have a read access to the PPS device.
Link: http://lkml.kernel.org/r/20190702092251.24303-1-mlichvar@redhat.com
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rodolfo Giometti <giometti@enneenne.com>
Cc: Greg KH <greg@kroah.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
struct pid's count is an atomic_t field used as a refcount. Use
refcount_t for it which is basically atomic_t but does additional
checking to prevent use-after-free bugs.
For memory ordering, the only change is with the following:
- if ((atomic_read(&pid->count) == 1) ||
- atomic_dec_and_test(&pid->count)) {
+ if (refcount_dec_and_test(&pid->count)) {
kmem_cache_free(ns->pid_cachep, pid);
Here the change is from: Fully ordered --> RELEASE + ACQUIRE (as per
refcount-vs-atomic.rst) This ACQUIRE should take care of making sure the
free happens after the refcount_dec_and_test().
The above hunk also removes atomic_read() since it is not needed for the
code to work and it is unclear how beneficial it is. The removal lets
refcount_dec_and_test() check for cases where get_pid() happened before
the object was freed.
Link: http://lkml.kernel.org/r/20190701183826.191936-1-joel@joelfernandes.org
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Reviewed-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Elena Reshetova <elena.reshetova@intel.com>
Cc: Jann Horn <jannh@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: KJ Tsanaktsidis <ktsanaktsidis@zendesk.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The dev_info.name[] array has space for RIO_MAX_DEVNAME_SZ + 1
characters. But the problem here is that we don't ensure that the user
put a NUL terminator on the end of the string. It could lead to an out
of bounds read.
Link: http://lkml.kernel.org/r/20190529110601.GB19119@mwanda
Fixes: e8de370188d0 ("rapidio: add mport char device driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Alexandre Bounine <alex.bou9@gmail.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Now that restore_saved_sigmask_unless() is always called with the same
argument right before poll_select_copy_remaining() we can move it into
poll_select_copy_remaining() and make it the only caller of restore() in
fs/select.c.
The patch also renames poll_select_copy_remaining(),
poll_select_finish() looks better after this change.
kern_select() doesn't use set_user_sigmask(), so in this case
poll_select_finish() does restore_saved_sigmask_unless() "for no
reason". But this won't hurt, and WARN_ON(!TIF_SIGPENDING) is still
valid.
Link: http://lkml.kernel.org/r/20190606140915.GC13440@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Laight <David.Laight@aculab.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Eric Wong <e@80x24.org>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
do_poll() returns -EINTR if interrupted and after that all its callers
have to translate it into -ERESTARTNOHAND. Change do_poll() to return
-ERESTARTNOHAND and update (simplify) the callers.
Note that this also unifies all users of restore_saved_sigmask_unless(),
see the next patch.
Linus:
: The *right* return value will actually be then chosen by
: poll_select_copy_remaining(), which will turn ERESTARTNOHAND to EINTR
: when it can't update the timeout.
:
: Except for the cases that use restart_block and do that instead and
: don't have the whole timeout restart issue as a result.
Link: http://lkml.kernel.org/r/20190606140852.GB13440@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Laight <David.Laight@aculab.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Eric Wong <e@80x24.org>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
task->saved_sigmask and ->restore_sigmask are only used in the ret-from-
syscall paths. This means that set_user_sigmask() can save ->blocked in
->saved_sigmask and do set_restore_sigmask() to indicate that ->blocked
was modified.
This way the callers do not need 2 sigset_t's passed to set/restore and
restore_user_sigmask() renamed to restore_saved_sigmask_unless() turns
into the trivial helper which just calls restore_saved_sigmask().
Link: http://lkml.kernel.org/r/20190606113206.GA9464@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Eric Wong <e@80x24.org>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: David Laight <David.Laight@aculab.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
