summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-04-27ixgbe: Properly display 1 gig downshift warning for backplaneAnjali Singhai
Description: When using Intel smartspeed, the patch displays a warning when the link down shifts to 1 Gig. Signed-off-by: Anjali Singhai <anjali.singhai@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27ixgbe: cleanup ethtool autoneg inputDon Skidmore
The way we were setting autoneg via ethtool was inconstant with that of our other drivers. It will change the following: If autoneg is off: >ethtool -a eth0 Pause parameters for eth0: Autonegotiate: off RX: off TX: off Before: >ethtool -A eth0 autoneg on >ethtool -a eth0 Pause parameters for eth0: Autonegotiate: off RX: off TX: off Now: >ethtool -A eth0 autoneg on >ethtool -a eth0 Pause parameters for eth0: Autonegotiate: on RX: on TX: on Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27ixgbevf: Fix link speed displayGreg Rose
The ixgbevf driver would always report 10Gig speeds even when the link speed is downshifted to 1Gig. This patch fixes that problem. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27net: reimplement softnet_data.output_queue as a FIFO queueChangli Gao
reimplement softnet_data.output_queue as a FIFO queue to keep the fairness among the qdiscs rescheduled. Signed-off-by: Changli Gao <xiaosuo@gmail.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> ---- include/linux/netdevice.h | 1 + net/core/dev.c | 22 ++++++++++++---------- 2 files changed, 13 insertions(+), 10 deletions(-) Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27mac80211: fix rts threshold checkShanyu Zhao
Currently whenever rts thresold is set, every packet will use RTS protection no matter its size exceeds the threshold or not. This is due to a bug in the rts threshold check. if (len > tx->local->hw.wiphy->rts_threshold) { txrc.rts = rts = true; } Basically it is comparing an int (len) and a u32 (rts_threshold), and the variable len is assigned as: len = min_t(int, tx->skb->len + FCS_LEN, tx->local->hw.wiphy->frag_threshold); However, when frag_threshold is "-1", len is always "-1", which is 0xffffffff therefore rts is always set to true. CC: stable@kernel.org Signed-off-by: Shanyu Zhao <shanyu.zhao@intel.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-27mac80211: give virtual interface to hw_scanJohannes Berg
When scanning, it is somewhat important to scan on the correct virtual interface. All drivers that currently implement hw_scan only support a single virtual interface, but that may change and then we'd want to be ready. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-27cfg80211: Remove default dynamic PS timeout valueJuuso Oikarinen
Now that the mac80211 is choosing dynamic ps timeouts based on the ps-qos network latency configuration, configure a default value of -1 as the dynamic ps timeout in cfg80211. This value allows the mac80211 to determine the value to be used. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-27mac80211: Determine dynamic PS timeout based on ps-qos network latencyJuuso Oikarinen
Determine the dynamic PS timeout based on the configured ps-qos network latency. For backwards wext compatibility, allow the dynamic PS timeout configured by the cfg80211 to overrule the automatically determined value. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-27ath9k: Avoid corrupt frames being forwarded to mac80211.Vivek Natarajan
If bit 29 is set, MAC H/W can attempt to decrypt the received aggregate with WEP or TKIP, eventhough the received frame may be a CRC failed corrupted frame. If this bit is set, H/W obeys key type in keycache. If it is not set and if the key type in keycache is neither open nor AES, H/W forces key type to be open. But bit 29 should be set to 1 for AsyncFIFO feature to encrypt/decrypt the aggregate with WEP or TKIP. Cc: stable@kernel.org Reported-by: Johan Hovold <johan.hovold@lundinova.se> Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: Ranga Rao Ravuri <ranga.ravuri@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-27ath9k_htc: Handle CONF_IDLE during unassociated state to save power.Vivek Natarajan
Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-27mac80211: implement ap isolation supportFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-27cfg80211: add ap isolation supportFelix Fietkau
This is used to configure APs to not bridge traffic between connected stations. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-27MAINTAINERS: add entry for include/linux/iw_handler.hJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-27ath9k_hw: Fix TX interrupt mitigation settingsLuis R. Rodriguez
TX interrupt mitigation reduces the number of interrupts by addressing several interrupt actions (AR_IMR_TXOK, AR_IMR_TXDESC) all in one interrupt so when enabling it discard setting the other interrupts. Without this TX interrupt mitigation would actually increase the number of interrupts two-fold. We still leave TX interrupt mitigation disabled as it is still being tested. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-27ath9k_hw: fix noisefloor timeout handling on AR9003Felix Fietkau
When the noisefloor calibration times out, do not load -50 into the registers, since this might cause rx issues. Instead, leave enough time for the noise floor calibration to complete until the next check. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-27ath9k_hw: Fix endian bug in an AR9003 EEPROM fieldFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-27ath9k_hw: Fix typos in tx rate power level parsing for AR9003Felix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-27ath9k_hw: use the configured power limit for AR9003Felix Fietkau
Since the new AR9003 EEPROM code does tune the card for the configured tx power level, we need to fill in the correct power limits in the TPC part of the DMA descriptor. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-27ath9k: wake queue after processing edma rx framesFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-27ath9k_hw: fix fast clock handling for 5GHz channelsFelix Fietkau
Combine multiple checks that were supposed to check for the same conditions, but didn't. Always enable fast PLL clock on AR9280 2.0 Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-27ath9k_hw: update EEPROM data structure for AR9280Felix Fietkau
Adds read access for the 5 GHz fast clock flag Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-27ath9k_hw: Fix usec to hw clock conversion in 5Ghz for ar9003Vasanthakumar Thiagarajan
Fast clock operation (44Mhz) is enabled for 5Ghz in ar9003, so take care of the conversion from usec to hw clock. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-27ath9k_hw: disable TX IQ calibration for AR9003Luis R. Rodriguez
Disable TX IQ calibration, it was prematurely enabled in previous versions. Cc: Paul Shaw <Paul.Shaw@Atheros.com> Cc: Thomas Hammel <Thomas.Hammel@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-27ath9k_hw: fix typo in the AR9003 EEPROM data structure definitionFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-27ath9k_hw: fix pll clock setting for 5ghz on AR9003Felix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-27ath9k_hw: update initvals for AR9003Felix Fietkau
This synchs up the initvals to the values used on the Atheros HAL for AR9003. This specific change adds support for a new high power module. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-27mac80211: fix handling of 4-address-mode in ieee80211_change_ifaceFelix Fietkau
A misplaced interface type check bails out too early if the interface is not in monitor mode. This patch moves it to the right place, so that it only covers changes to the monitor flags. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-27ath9k_htc: Simplify RX IRQ handlerSujith
A bunch of validation and processing in the RX IRQ handler can be moved to the RX tasklet. The IRQ handler is already heavy, with the memory allocation for handling stream mode. Also, a memcpy of 40 bytes for every packet can be avoided in the handler. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-27ath9k_htc: Validate TX Endpoint IDSujith
Check for the endpoint IDs when processing TX completions and drop the unsupported EPIDs. We can add other endpoints (UAPSD,..) when support is added. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-27ath9k_htc: Remove unnecessary powersave restoreSujith
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-27Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kaber/ipmr-2.6
2010-04-27ixgb: Use pr_<level> and netdev_<level>Joe Perches
Convert DEBUGOUTx to pr_debug Convert DEBUGFUNC to more commonly used ENTER Convert mac address output to %pM Use #define pr_fmt Convert a few printks to pr_<level> Improve ixgb_mc_addr_list_update: use a temporary for current mc address Use etherdevice.h functions for mac address testing Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27ixgbe: ixgbe_down needs to stop dev_watchdogJohn Fastabend
There is a small race between when the tx queues are stopped and when netif_carrier_off() is called in ixgbe_down. If the dev_watchdog() timer fires during this time it is possible for a false tx timeout to occur. This patch moves the netif_carrier_off() so that it is called before the tx queues are stopped preventing the dev_watchdog timer from detecting false tx timeouts. The race is seen occosionally when FCoE or DCB settings are being configured or changed. Testing note, running ifconfig up/down will not reproduce this issue because dev_open/dev_close call dev_deactivate() and then dev_activate(). Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27igb: add support for reporting 5GT/s during probe on PCIe Gen2Alexander Duyck
This change corrects the fact that we were not reporting Gen2 link speeds when we were in fact connected at Gen2 rates. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27ixgbe: fix bug when EITR=0 causing no writebacksJesse Brandeburg
writebacks can be held indefinitely by hardware if EITR=0, when combined with TXDCTL.WTHRESH=8. When EITR=0, WTHRESH should be set back to zero. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27ixgbe: enable extremely low latencyJesse Brandeburg
82598/82599 can support EITR == 0, which allows for the absolutely lowest latency setting in the hardware. This disables writeback batching and anything else that relies upon a delayed interrupt. This patch enables the feature of "override" when a user sets rx-usecs to zero, the driver will respect that setting over using RSC, and automatically disable RSC. If rx-usecs is used to set the EITR value to 0, then the driver should disable LRO (aka RSC) internally until EITR is set to non-zero again. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27igbvf: double increment nr_fragsKoki Sanagi
There is no need to increment nr_frags because skb_fill_page_desc increments it. Signed-off-by: Koki Sanagi <sanagi.koki@jp.fujitsu.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27igb: double increment nr_fragsKoki Sanagi
There is no need to increment nr_frags because skb_fill_page_desc increments it. Signed-off-by: Koki Sanagi <sanagi.koki@jp.fujitsu.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27net: fix a lockdep rcu warning in __sk_dst_set()Eric Dumazet
__sk_dst_set() might be called while no state can be integrated in a rcu_dereference_check() condition. So use rcu_dereference_raw() to shutup lockdep warnings (if CONFIG_PROVE_RCU is set) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27rps: inet_rps_save_rxhash() argument is not constEric Dumazet
const qualifier on sock argument is misleading, since we can modify rxhash. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27TCP: avoid to send keepalive probes if receiving dataFlavio Leitner
RFC 1122 says the following: ... Keep-alive packets MUST only be sent when no data or acknowledgement packets have been received for the connection within an interval. ... The acknowledgement packet is reseting the keepalive timer but the data packet isn't. This patch fixes it by checking the timestamp of the last received data packet too when the keepalive timer expires. Signed-off-by: Flavio Leitner <fleitner@redhat.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27bridge: multicast router list manipulationstephen hemminger
I prefer that the hlist be only accessed through the hlist macro objects. Explicit twiddling of links (especially with RCU) exposes the code to future bugs. Compile tested only. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27bridge: use is_multicast_ether_addrstephen hemminger
Use existing inline function. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/e100.c drivers/net/e1000e/netdev.c
2010-04-27net: suppress RCU lockdep false positive in twsk_net()Paul E. McKenney
Calls to twsk_net() are in some cases protected by reference counting as an alternative to RCU protection. Cases covered by reference counts include __inet_twsk_kill(), inet_twsk_free(), inet_twdr_do_twkill_work(), inet_twdr_twcal_tick(), and tcp_timewait_state_process(). RCU is used by inet_twsk_purge(). Locking is used by established_get_first() and established_get_next(). Finally, __inet_twsk_hashdance() is an initialization case. It appears to be non-trivial to locate the appropriate locks and reference counts from within twsk_net(), so used rcu_dereference_raw(). Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27cxgb3: Wait longer for control packets on initializationAndre Detsch
In some Power7 platforms, when using VIOS (Virtual I/O Server), we need to wait longer for control packets to finish transfer during initialization. Without this change, initialization may fail prematurely. Signed-off-by: Wen Xiong <wenxiong@us.ibm.com> Signed-off-by: Andre Detsch <adetsch@br.ibm.com> Acked-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27e1000e: enable/disable ASPM L0s and L1 and ERT according to hardware errataBruce Allan
Prompted by a previous patch submitted by Matthew Garret <mjg@redhat.com>, further digging into errata documentation reveals the current enabling or disabling of ASPM L0s and L1 states for certain parts supported by this driver are incorrect. 82571 and 82572 should always disable L1. For standard frames, 82573/82574/82583 can enable L1 but L0s must be disabled, and for jumbo frames 82573/82574 must disable L1. This allows for some parts to enable L1 in certain configurations leading to better power savings. Also according to the same errata, Early Receive (ERT) should be disabled on 82573 when using jumbo frames. Cc: Matthew Garret <mjg@redhat.com> Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27ixgbe: Power down PHY during driver resetsPeter Waskiewicz
The PHY laser is still on during driver init. It's allowing garbage to hit our FIFO, which eventually can cause the entire device to die. Power down the laser while setting up the device, and re-enable the laser before getting link. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27bridge: Fix build of ipv6 multicast code.David S. Miller
Based upon a report from Stephen Rothwell: -------------------- net/bridge/br_multicast.c: In function 'br_ip6_multicast_alloc_query': net/bridge/br_multicast.c:469: error: implicit declaration of function 'csum_ipv6_magic' Introduced by commit 08b202b6726459626c73ecfa08fcdc8c3efc76c2 ("bridge br_multicast: IPv6 MLD support") from the net tree. csum_ipv6_magic is declared in net/ip6_checksum.h ... -------------------- Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27Remove redundant check for CONFIG_MMUChristoph Egger
The checks for CONFIG_MMU at this location are duplicated as all the code is located inside a #ifndef CONFIG_MMU block. So the first conditional block will always be included while the second never will. Signed-off-by: Christoph Egger <siccegge@stud.informatik.uni-erlangen.de> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit (git 2.34.1) at 2025-09-16 01:35:04 +0000