| Age | Commit message (Collapse) | Author |
|---|
|
The irqsteer IP routes groups of input interrupts to a dedicated system
interrupt per group. Each group handles 64 input interrupts.
The current driver is limited to 8 groups, i.e. 512 input interrupts, which
is sufficient for the existing i.MX SoCs. The upcoming i.MX94 family
extends the irqsteer IP to 15 groups, i.e. 960 interrupts.
Extending the group limit to 15 enables this, but the new SoCs are not
guaranteed to utilize all 15 groups. Unused groups have no mapping for the
underlying output interrupt, which makes the probe function fail as it
expects a valid mapping for each group output.
Remove this limitation and stop the mapping loop, when no valid mapping is
detected.
[ tglx: Massage change log ]
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/all/20250305095522.2177843-1-ping.bai@nxp.com
|
|
The NMI controller in the Allwinner A523 is almost compatible to the
previous versions of this IP, but requires the extra bit 31 to be set in
the enable register to actually report the NMI.
Add a mask to allow such an enable bit to be specified, and add this to
the per-SoC data structure. As this struct was just for different register
offsets so far, it was consequently named "reg_offs", which is now no
longer applicable, so rename this to the more generic "data" on the way,
and move the existing offsets into a struct of its own.
Also add the respective Allwinner A523 compatible string, and set bit 31
in its enable mask, to add support for this SoC.
[ tglx: Mop up some coding style along with it ]
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250307005712.16828-7-andre.przywara@arm.com
|
|
The Allwinner A523 SoC contains an NMI controller very close to the one
used in the recent Allwinner SoCs, but it adds another bit that needs to
be toggled to actually deliver the IRQs. Sigh.
Add the A523 specific name to the list of allowed compatible strings.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/all/20250307005712.16828-6-andre.przywara@arm.com
|
|
The execution order of constructors in undefined and depends on the
toolchain. While recent toolchains seems to have a stable order, it
doesn't work for older ones and may also change at any time.
Stop validating the order and instead only validate that all
constructors are executed.
Reported-by: Willy Tarreau <w@1wt.eu>
Closes: https://lore.kernel.org/lkml/20250301110735.GA18621@1wt.eu/
Link: https://lore.kernel.org/r/20250306-nolibc-constructor-order-v1-1-68fd161cc5ec@weissschuh.net
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
The fix to atomically read the pipe head and tail state when not holding
the pipe mutex has caused a number of headaches due to the size change
of the involved types.
It turns out that we don't have _that_ many places that access these
fields directly and were affected, but we have more than we strictly
should have, because our low-level helper functions have been designed
to have intimate knowledge of how the pipes work.
And as a result, that random noise of direct 'pipe->head' and
'pipe->tail' accesses makes it harder to pinpoint any actual potential
problem spots remaining.
For example, we didn't have a "is the pipe full" helper function, but
instead had a "given these pipe buffer indexes and this pipe size, is
the pipe full". That's because some low-level pipe code does actually
want that much more complicated interface.
But most other places literally just want a "is the pipe full" helper,
and not having it meant that those places ended up being unnecessarily
much too aware of this all.
It would have been much better if only the very core pipe code that
cared had been the one aware of this all.
So let's fix it - better late than never. This just introduces the
trivial wrappers for "is this pipe full or empty" and to get how many
pipe buffers are used, so that instead of writing
if (pipe_full(pipe->head, pipe->tail, pipe->max_usage))
the places that literally just want to know if a pipe is full can just
say
if (pipe_is_full(pipe))
instead. The existing trivial cases were converted with a 'sed' script.
This cuts down on the places that access pipe->head and pipe->tail
directly outside of the pipe code (and core splice code) quite a lot.
The splice code in particular still revels in doing the direct low-level
accesses, and the fuse fuse_dev_splice_write() code also seems a bit
unnecessarily eager to go very low-level, but it's at least a bit better
than it used to be.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull drm fixes from Dave Airlie:
"Fixes across the board, mostly xe and imagination with some amd and
misc others.
The xe fixes are mostly hmm related, though there are some others in
there as well, nothing really stands out otherwise.
The nouveau Kconfig to select FW_CACHE is in this, which we discussed
a while back.
nouveau:
- rely on fw caching Kconfig fix
imagination:
- avoid deadlock on fence release
- fix fence initialisation
- fix timestamps firmware traces
scheduler:
- fix include guard
bochs:
- dpms fix
i915:
- bump max stream count to match pipes
xe:
- Remove double page flip on initial plane
- Properly setup userptr pfn_flags_mask
- Fix GT "for each engine" workarounds
- Fix userptr races and missed validations
- Userptr invalid page access fixes
- Cleanup some style nits
amdgpu:
- Fix NULL check in DC code
- SMU 14 fix
amdkfd:
- Fix NULL check in queue validation
radeon:
- RS400 HyperZ fix"
* tag 'drm-fixes-2025-03-07' of https://gitlab.freedesktop.org/drm/kernel: (22 commits)
drm/bochs: Fix DPMS regression
drm/xe/userptr: Unmap userptrs in the mmu notifier
drm/xe/hmm: Don't dereference struct page pointers without notifier lock
drm/xe/hmm: Style- and include fixes
drm/xe: Add staging tree for VM binds
drm/xe: Fix fault mode invalidation with unbind
drm/xe/vm: Fix a misplaced #endif
drm/xe/vm: Validate userptr during gpu vma prefetching
drm/amd/pm: always allow ih interrupt from fw
drm/radeon: Fix rs400_gpu_init for ATI mobility radeon Xpress 200M
drm/amdkfd: Fix NULL Pointer Dereference in KFD queue
drm/amd/display: Fix null check for pipe_ctx->plane_state in resource_build_scaling_params
drm/xe: Fix GT "for each engine" workarounds
drm/xe/userptr: properly setup pfn_flags_mask
drm/i915/mst: update max stream count to match number of pipes
drm/xe: Remove double pageflip
drm/sched: Fix preprocessor guard
drm/imagination: Fix timestamps in firmware traces
drm/imagination: only init job done fences once
drm/imagination: Hold drm_gem_gpuva lock for unmap
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Fix racy non-atomic read-then-increment operation with
PREEMPT_RT in nft_ct, from Sebastian Andrzej Siewior.
2) GC is not skipped when jiffies wrap around in nf_conncount,
from Nicklas Bo Jensen.
3) flush_work() on nf_tables_destroy_work waits for the last queued
instance, this could be an instance that is different from the one
that we must wait for, then make destruction work queue.
* tag 'nf-25-03-06' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: make destruction work queue pernet
netfilter: nf_conncount: garbage collection is not skipped when jiffies wrap around
netfilter: nft_ct: Use __refcount_inc() for per-CPU nft_ct_pcpu_template.
====================
Link: https://patch.msgid.link/20250306153446.46712-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 5f89154e8e9e3445f9b59 ("block: Use enum to define RQF_x bit
indexes") converted the RQF flags to an anonymous enum, which was
a beneficial change. This patch goes one step further by naming the enum
as "rqf_flags".
This naming enables exporting these flags to BPF clients, eliminating
the need to duplicate these flags in BPF code. Instead, BPF clients can
now access the same kernel-side values through CO:RE (Compile Once, Run
Everywhere), as shown in this example:
rqf_stats = bpf_core_enum_value(enum rqf_flags, __RQF_STATS)
Suggested-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20250306-rqf_flags-v1-1-bbd64918b406@debian.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The paravirtual implementation ID stuffs is 64-bit only and broke 32bit
arm builds. Slap an ifdef bandaid on the situation to get things rolling
again.
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
If kzalloc in gred_init returns a NULL pointer, the code follows the
error handling path, invoking gred_destroy. This, in turn, calls
gred_offload, where memset could receive a NULL pointer as input,
potentially leading to a kernel crash.
When table->opt is NULL in gred_init(), gred_change_table_def()
is not called yet, so it is not necessary to call ->ndo_setup_tc()
in gred_offload().
Signed-off-by: Jun Yang <juny24602@gmail.com>
Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com>
Fixes: f25c0515c521 ("net: sched: gred: dynamically allocate tc_gred_qopt_offload")
Link: https://patch.msgid.link/20250305154410.3505642-1-juny24602@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-03-05 (ice)
This series contains updates to ice driver.
Larysa removes modification of destination override that caused LLDP
packets to be blocked.
Grzegorz fixes a memory leak in aRFS.
Marcin resolves an issue with operation of switchdev and LAG.
Przemek adjusts order of calls for registering devlink in relation to
health reporters.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: register devlink prior to creating health reporters
ice: Fix switchdev slow-path in LAG
ice: fix memory leak in aRFS after reset
ice: do not configure destination override for switchdev
====================
Link: https://patch.msgid.link/20250305213549.1514274-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.14-2025-03-06:
amdgpu:
- Fix NULL check in DC code
- SMU 14 fix
amdkfd:
- Fix NULL check in queue validation
radeon:
- RS400 HyperZ fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306193424.27413-1-alexander.deucher@amd.com
|
|
Pull bcachefs fixes from Kent Overstreet:
- Fix a compatibility issue: we shouldn't be setting incompat feature
bits unless explicitly requested
- Fix another bug where the journal alloc/resize path could spuriously
fail with -BCH_ERR_open_buckets_empty
- Copygc shouldn't run on read-only devices: fragmentation isn't an
issue if we're not currently writing to a given device, and it may
not have anywhere to move the data to
* tag 'bcachefs-2025-03-06' of git://evilpiepirate.org/bcachefs:
bcachefs: copygc now skips non-rw devices
bcachefs: Fix bch2_dev_journal_alloc() spuriously failing
bcachefs: Don't set BCH_FEATURE_incompat_version_field unless requested
|
|
There's no point in doing copygc on non-rw devices: the fragmentation
doesn't matter if we're not writing to them, and we may not have
anywhere to put the data on our other devices.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Previously, we fixed journal resize spuriousl failing with
-BCH_ERR_open_buckets_empty, but initial journal allocation was missed
because it didn't invoke the "block on allocator" loop at all.
Factor out the "loop on allocator" code to fix that.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
- Remove double page flip on initial plane (Maarten)
- Properly setup userptr pfn_flags_mask (Auld)
- Fix GT "for each engine" workarounds (Tvrtko)
- Fix userptr races and missed validations (Thomas, Brost)
- Userptr invalid page access fixes (Thomas)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Z8ni6w3tskCFL11O@intel.com
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
- DP MST fix (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Z8ng8NjmRGiVcb5t@intel.com
|
|
bts_ctx might not be allocated, for example if the CPU has X86_FEATURE_PTI,
but intel_bts_disable/enable_local() and intel_bts_interrupt() are called
unconditionally from intel_pmu_handle_irq() and crash on bts_ctx.
So check if bts_ctx is allocated when calling BTS functions.
Fixes: 3acfcefa795c ("perf/x86/intel/bts: Allocate bts_ctx only if necessary")
Reported-by: Jiri Olsa <olsajiri@gmail.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Suggested-by: Adrian Hunter <adrian.hunter@intel.com>
Suggested-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250306051102.2642-1-lirongqing@baidu.com
|
|
This doesn't matter much, but is what the standard says.
Signed-off-by: Louis Taylor <louis@kragniz.eu>
Link: https://lore.kernel.org/r/20250306184147.208723-5-louis@kragniz.eu
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
This behaviour was changed in commit a7604ba149e7 ("tools/nolibc/sys:
make open() take a vararg on the 3rd argument").
Signed-off-by: Louis Taylor <louis@kragniz.eu>
Link: https://lore.kernel.org/r/20250306184147.208723-4-louis@kragniz.eu
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
openat() uses mode_t for this, so also update open() to be consistent.
Signed-off-by: Louis Taylor <louis@kragniz.eu>
Link: https://lore.kernel.org/r/20250306184147.208723-3-louis@kragniz.eu
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
All architectures support openat, so we don't need to make its use
conditional.
Signed-off-by: Louis Taylor <louis@kragniz.eu>
Link: https://lore.kernel.org/r/20250306184147.208723-2-louis@kragniz.eu
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
openat is useful to avoid needing to construct relative paths, so expose
a wrapper for using it directly.
Signed-off-by: Louis Taylor <louis@kragniz.eu>
Link: https://lore.kernel.org/r/20250306184147.208723-1-louis@kragniz.eu
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
The rseq_cs field is documented as being set to 0 by user-space prior to
registration, however this is not currently enforced by the kernel. This
can result in a segfault on return to user-space if the value stored in
the rseq_cs field doesn't point to a valid struct rseq_cs.
The correct solution to this would be to fail the rseq registration when
the rseq_cs field is non-zero. However, some older versions of glibc
will reuse the rseq area of previous threads without clearing the
rseq_cs field and will also terminate the process if the rseq
registration fails in a secondary thread. This wasn't caught in testing
because in this case the leftover rseq_cs does point to a valid struct
rseq_cs.
What we can do is clear the rseq_cs field on registration when it's
non-zero which will prevent segfaults on registration and won't break
the glibc versions that reuse rseq areas on thread creation.
Signed-off-by: Michael Jeanson <mjeanson@efficios.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250306211223.109455-1-mjeanson@efficios.com
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
A Kconfig fix for nouveau, locking and timestamp fixes for imagination,
a header guard fix for sched and a DPMS regression fix for bochs.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306-antelope-of-imminent-anger-bca19e@houat
|
|
The 5-level paging code parses the command line to look for the 'no5lvl'
string, and does so very early, before sanitize_boot_params() has been
called and has been given the opportunity to wipe bogus data from the
fields in boot_params that are not covered by struct setup_header, and
are therefore supposed to be initialized to zero by the bootloader.
This triggers an early boot crash when using syslinux-efi to boot a
recent kernel built with CONFIG_X86_5LEVEL=y and CONFIG_EFI_STUB=n, as
the 0xff padding that now fills the unused PE/COFF header is copied into
boot_params by the bootloader, and interpreted as the top half of the
command line pointer.
Fix this by sanitizing the boot_params before use. Note that there is no
harm in calling this more than once; subsequent invocations are able to
spot that the boot_params have already been cleaned up.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <stable@vger.kernel.org> # v6.1+
Link: https://lore.kernel.org/r/20250306155915.342465-2-ardb+git@google.com
Closes: https://lore.kernel.org/all/202503041549.35913.ulrich.gemkow@ikr.uni-stuttgart.de
|
|
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux
Merge amd-pstate updates for 6.15 (3/6/25) from Mario Limonciello:
"A lot of code optimization to avoid cases where call paths will end up
calling the same writes multiple times and needlessly caching variables.
To accomplish this some of the writes are now made into an atomically
written "perf" variable. Locking has been overhauled to ensure it only
applies to the necessary functions. Tracing has been adjusted to ensure
trace events only are used right before writing out to the hardware."
NOTE: This is a redo of amd-pstate-v6.15-2025-03-03 with a fixed Fixes tag.
* tag 'amd-pstate-v6.15-2025-03-06' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux: (29 commits)
cpufreq/amd-pstate: Drop actions in amd_pstate_epp_cpu_offline()
cpufreq/amd-pstate: Stop caching EPP
cpufreq/amd-pstate: Rework CPPC enabling
cpufreq/amd-pstate: Drop debug statements for policy setting
cpufreq/amd-pstate: Update cppc_req_cached for shared mem EPP writes
cpufreq/amd-pstate: Move all EPP tracing into *_update_perf and *_set_epp functions
cpufreq/amd-pstate: Cache CPPC request in shared mem case too
cpufreq/amd-pstate: Replace all AMD_CPPC_* macros with masks
cpufreq/amd-pstate-ut: Adjust variable scope
cpufreq/amd-pstate-ut: Run on all of the correct CPUs
cpufreq/amd-pstate-ut: Drop SUCCESS and FAIL enums
cpufreq/amd-pstate-ut: Allow lowest nonlinear and lowest to be the same
cpufreq/amd-pstate-ut: Use _free macro to free put policy
cpufreq/amd-pstate: Drop `cppc_cap1_cached`
cpufreq/amd-pstate: Overhaul locking
cpufreq/amd-pstate: Move perf values into a union
cpufreq/amd-pstate: Drop min and max cached frequencies
cpufreq/amd-pstate: Show a warning when a CPU fails to setup
cpufreq/amd-pstate: Invalidate cppc_req_cached during suspend
cpufreq/amd-pstate: Fix the clamping of perf values
...
|
|
This patch is also an issue report. get_cpu_topology will always save
into cpupower_topology a cores size of 0. The code to handle this looks
like it was commented out, and what is commented out is missing a curly
bracket.
https://elixir.bootlin.com/linux/v6.13.5/source/tools/power/cpupower/lib/cpupower.c#L206-L212
Inspiration was taken from psutil to implement this by querying
core_cpu_list. Instead of using a hashmap, I used a sorted array, and
counted the number of valid unique strings. The counting of this takes
place before the qsort for .pkg as the following code says it is
dependent on the order of that sort.
The previous code claimed Intel CPUs are not numbered correctly. I was
not able to reproduce that issue and removed that comment and the code.
This commit was tested with the libcpupower SWIG Python bindings and
performed correctly on 4 different setups. The most notable is the
Framework Intel laptop; a hybrid system of 4 P cores (8 threads) and 8 E
cores (8 threads).
The 4 setups: A 4 core virt-manager VM running Fedora 41 4c/4t (specs not
listed) was tested as a sanity test for VMs. A Lenovo Ryzen 7 Pro 7840HS
8c/16t. A Supermico Intel(R) Xeon(R) Gold 6330 CPU w/ 56c/112t with 2 CPU
sockets. A Framework 12th Gen Intel(R) Core(TM) i5-1240P with hybrid
cores.
CPU(s): 16
On-line CPU(s) list: 0-15
Vendor ID: AuthenticAMD
Model name: AMD Ryzen 7 PRO 7840HS w/ Radeon 780M Graphics
CPU family: 25
Model: 116
Thread(s) per core: 2
Core(s) per socket: 8
Socket(s): 1
Stepping: 1
CPU(s): 112
On-line CPU(s) list: 0-111
Vendor ID: GenuineIntel
BIOS Vendor ID: Intel(R) Corporation
Model name: Intel(R) Xeon(R) Gold 6330 CPU @ 2.00GHz
BIOS Model name: Intel(R) Xeon(R) Gold 6330 CPU @ 2.00GHz CPU @ 2.0GHz
BIOS CPU family: 179
CPU family: 6
Model: 106
Thread(s) per core: 2
Core(s) per socket: 28
Socket(s): 2
Stepping: 6
CPU(s): 16
On-line CPU(s) list: 0-15
Vendor ID: GenuineIntel
Model name: 12th Gen Intel(R) Core(TM) i5-1240P
CPU family: 6
Model: 154
Thread(s) per core: 2
Core(s) per socket: 12
Socket(s): 1
Stepping: 3
Link: https://lore.kernel.org/r/20250305210901.24177-1-jwyatt@redhat.com
Signed-off-by: "John B. Wyatt IV" <jwyatt@redhat.com>
Signed-off-by: "John B. Wyatt IV" <sageofredondo@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Remove hard-coded topology depth values and replace them with
defines to improve code readability and maintainability in
cpupower-monitor code.
Link: https://lore.kernel.org/r/20250305225342.19447-3-skhan@linuxfoundation.org
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
cmd_monitor() calls get_cpu_topology() to allocate memory for
cpu topology and fails to release in error legs.
Fix it to call cpu_topology_release() from error legs.
Link: https://lore.kernel.org/r/20250305225342.19447-2-skhan@linuxfoundation.org
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Notice that em_dev_register_perf_domain() and the functions called by it
do not update objects pointed to by its cb and cpus parameters, so the
const modifier can be added to them.
This allows the return value of cpumask_of() or a pointer to a
struct em_data_callback declared as const to be passed to
em_dev_register_perf_domain() directly without explicit type
casting which is rather handy.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/4648962.LvFx2qVVIh@rjwysocki.net
|
|
The documentation examples in rust/kernel/workqueue.rs use pr_info!
calls that lack a trailing newline. To maintain consistency with
kernel logging practices, this patch adds the newline to all
affected examples.
Fixes: 15b286d1fd05 ("rust: workqueue: add examples")
Reported-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://github.com/Rust-for-Linux/linux/issues/1139
Signed-off-by: Alban Kurti <kurti@invicto.ai>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250206-printing_fix-v3-5-a85273b501ae@invicto.ai
[ Replaced Closes with Link since it fixes part of the issue. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
The pr_info! example in rust/kernel/sync/locked_by.rs was missing
a newline. This patch appends the missing newline to ensure
that log messages for locked resources display correctly.
Fixes: 7b1f55e3a984 ("rust: sync: introduce `LockedBy`")
Reported-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://github.com/Rust-for-Linux/linux/issues/1139
Signed-off-by: Alban Kurti <kurti@invicto.ai>
Link: https://lore.kernel.org/r/20250206-printing_fix-v3-4-a85273b501ae@invicto.ai
[ Replaced Closes with Link since it fixes part of the issue. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Several pr_info! calls in rust/kernel/init.rs (both in code examples
and macro documentation) were missing a newline, causing logs to
run together. This commit updates these calls to include a trailing
newline, improving readability and consistency with the C side.
Fixes: 6841d45a3030 ("rust: init: add `stack_pin_init!` macro")
Fixes: 7f8977a7fe6d ("rust: init: add `{pin_}chain` functions to `{Pin}Init<T, E>`")
Fixes: d0fdc3961270 ("rust: init: add `PinnedDrop` trait and macros")
Fixes: 4af84c6a85c6 ("rust: init: update expanded macro explanation")
Reported-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://github.com/Rust-for-Linux/linux/issues/1139
Signed-off-by: Alban Kurti <kurti@invicto.ai>
Link: https://lore.kernel.org/r/20250206-printing_fix-v3-3-a85273b501ae@invicto.ai
[ Replaced Closes with Link since it fixes part of the issue. Added
one more Fixes tag (still same set of stable kernels). - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth and wireless.
Current release - new code bugs:
- wifi: nl80211: disable multi-link reconfiguration
Previous releases - regressions:
- gso: fix ownership in __udp_gso_segment
- wifi: iwlwifi:
- fix A-MSDU TSO preparation
- free pages allocated when failing to build A-MSDU
- ipv6: fix dst ref loop in ila lwtunnel
- mptcp: fix 'scheduling while atomic' in
mptcp_pm_nl_append_new_local_addr
- bluetooth: add check for mgmt_alloc_skb() in
mgmt_device_connected()
- ethtool: allow NULL nlattrs when getting a phy_device
- eth: be2net: fix sleeping while atomic bugs in
be_ndo_bridge_getlink
Previous releases - always broken:
- core: support TCP GSO case for a few missing flags
- wifi: mac80211:
- fix vendor-specific inheritance
- cleanup sta TXQs on flush
- llc: do not use skb_get() before dev_queue_xmit()
- eth: ipa: nable checksum for IPA_ENDPOINT_AP_MODEM_{RX,TX}
for v4.7"
* tag 'net-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (41 commits)
net: ipv6: fix missing dst ref drop in ila lwtunnel
net: ipv6: fix dst ref loop in ila lwtunnel
mctp i3c: handle NULL header address
net: dsa: mt7530: Fix traffic flooding for MMIO devices
net-timestamp: support TCP GSO case for a few missing flags
vlan: enforce underlying device type
mptcp: fix 'scheduling while atomic' in mptcp_pm_nl_append_new_local_addr
net: ethtool: netlink: Allow NULL nlattrs when getting a phy_device
ppp: Fix KMSAN uninit-value warning with bpf
net: ipa: Enable checksum for IPA_ENDPOINT_AP_MODEM_{RX,TX} for v4.7
net: ipa: Fix QSB data for v4.7
net: ipa: Fix v4.7 resource group names
net: hns3: make sure ptp clock is unregister and freed if hclge_ptp_get_cycle returns an error
wifi: nl80211: disable multi-link reconfiguration
net: dsa: rtl8366rb: don't prompt users for LED control
be2net: fix sleeping while atomic bugs in be_ndo_bridge_getlink
llc: do not use skb_get() before dev_queue_xmit()
wifi: cfg80211: regulatory: improve invalid hints checking
caif_virtio: fix wrong pointer check in cfv_probe()
net: gso: fix ownership in __udp_gso_segment
...
|
|
Pull smb fixes from Steve French:
"Five SMB server fixes, two related client fixes, and minor MAINTAINERS
update:
- Two SMB3 lock fixes fixes (including use after free and bug on fix)
- Fix to race condition that can happen in processing IPC responses
- Four ACL related fixes: one related to endianness of num_aces, and
two related fixes to the checks for num_aces (for both client and
server), and one fixing missing check for num_subauths which can
cause memory corruption
- And minor update to email addresses in MAINTAINERS file"
* tag 'v6.14-rc5-smb3-fixes' of git://git.samba.org/ksmbd:
cifs: fix incorrect validation for num_aces field of smb_acl
ksmbd: fix incorrect validation for num_aces field of smb_acl
smb: common: change the data type of num_aces to le16
ksmbd: fix bug on trap in smb2_lock
ksmbd: fix use-after-free in smb2_lock
ksmbd: fix type confusion via race condition when using ipc_msg_send_request
ksmbd: fix out-of-bounds in parse_sec_desc()
MAINTAINERS: update email address in cifs and ksmbd entry
|
|
When the CPU goes offline there is no need to change the CPPC request
because the CPU will go into the deepest C-state it supports already.
Actually changing the CPPC request when it goes offline messes up the
cached values and can lead to the wrong values being restored when
it comes back.
Instead drop the actions and if the CPU comes back online let
amd_pstate_epp_set_policy() restore it to expected values.
Reviewed-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
EPP values are cached in the cpudata structure per CPU. This is needless
though because they are also cached in the CPPC request variable.
Drop the separate cache for EPP values and always reference the CPPC
request variable when needed.
Reviewed-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
The CPPC enable register is configured as "write once". That is
any future writes don't actually do anything.
Because of this, all the cleanup paths that currently exist for
CPPC disable are non-effective.
Rework CPPC enable to only enable after all the CAP registers have
been read to avoid enabling CPPC on CPUs with invalid _CPC or
unpopulated MSRs.
As the register is write once, remove all cleanup paths as well.
Reviewed-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
There are trace events that exist now for all amd-pstate modes that
will output information right before programming to the hardware.
This makes the existing debug statements unnecessary remaining
overhead. Drop them.
Reviewed-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
On EPP only writes update the cached variable so that the min/max
performance controls don't need to be updated again.
Reviewed-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
functions
The EPP tracing is done by the caller today, but this precludes the
information about whether the CPPC request has changed.
Move it into the update_perf and set_epp functions and include information
about whether the request has changed from the last one.
amd_pstate_update_perf() and amd_pstate_set_epp() now require the policy
as an argument instead of the cpudata.
Reviewed-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
In order to prevent a potential write for shmem_update_perf()
cache the request into the cppc_req_cached variable normally only
used for the MSR case.
This adds symmetry into the code and potentially avoids extra writes.
Reviewed-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
Bitfield masks are easier to follow and less error prone.
Reviewed-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
In amd_pstate_ut_check_freq() and amd_pstate_ut_check_perf() the cpudata
variable is only needed in the scope of the for loop. Move it there.
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Reviewed-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
If a CPU is missing a policy or one has been offlined then the unit test
is skipped for the rest of the CPUs on the system.
Instead; iterate online CPUs and skip any missing policies to allow
continuing to test the rest of them.
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Reviewed-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
Enums are effectively used as a boolean and don't show
the return value of the failing call.
Instead of using enums switch to returning the actual return
code from the unit test.
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Reviewed-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
Several Ryzen AI processors support the exact same value for lowest
nonlinear perf and lowest perf. Loosen up the unit tests to allow this
scenario.
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Reviewed-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
