Age | Commit message (Collapse) | Author |
|
If X86_FEATURE_USE_IBPB is not set, then both spectre_v2_user_ibpb and
spectre_v2_user_stibp are set to SPECTRE_V2_USER_NONE in
spectre_v2_user_select_mitigation(). Since ib_prctl_set() already checks
for this before performing the IBPB, the X86_FEATURE_USE_IBPB check is
redundant. Remove it.
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20250227012712.3193063-4-yosry.ahmed@linux.dev
|
|
The check is performed when either switch_mm_cond_ibpb or
switch_mm_always_ibpb is set. In both cases, X86_FEATURE_USE_IBPB is
always set. Remove the redundant check.
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20250227012712.3193063-3-yosry.ahmed@linux.dev
|
|
indirect_branch_prediction_barrier() only performs the MSR write if
X86_FEATURE_USE_IBPB is set, using alternative_msr_write(). In
preparation for removing X86_FEATURE_USE_IBPB, move the feature check
into the callers so that they can be addressed one-by-one, and use
X86_FEATURE_IBPB instead to guard the MSR write.
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Acked-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20250227012712.3193063-2-yosry.ahmed@linux.dev
|
|
There is a spelling mistake in a sig_print() message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250227091533.599213-1-colin.i.king@gmail.com
|
|
Change parity bit with XOR when !parity instead of masking bit out
and conditionally setting it when !parity.
Saves a couple of bytes in the object file.
Co-developed-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250226153709.6370-1-ubizjak@gmail.com
|
|
The bit pattern of _PAGE_DIRTY set and _PAGE_RW clear is used to mark
shadow stacks. This is currently checked for in mk_pte() but not
pfn_pte(). If we add the check to pfn_pte(), it catches vfree()
calling set_direct_map_invalid_noflush() which calls
__change_page_attr() which loads the old protection bits from the
PTE, clears the specified bits and uses pfn_pte() to construct the
new PTE.
We should, therefore, for kernel mappings, clear the _PAGE_DIRTY bit
consistently whenever we clear _PAGE_RW. I opted to do it in the
callers in case we want to use __change_page_attr() to create shadow
stacks inside the kernel at some point in the future. Arguably, we
might also want to clear _PAGE_ACCESSED here.
Note that the 3 functions involved:
__set_pages_np()
kernel_map_pages_in_pgd()
kernel_unmap_pages_in_pgd()
Only ever manipulate non-swappable kernel mappings, so maintaining
the DIRTY:1|RW:0 special pattern for shadow stacks and DIRTY:0
pattern for non-shadow-stack entries can be maintained consistently
and doesn't result in the unintended clearing of a live dirty bit
that could corrupt (destroy) dirty bit information for user mappings.
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/174051422675.10177.13226545170101706336.tip-bot2@tip-bot2
Closes: https://lore.kernel.org/oe-lkp/202502241646.719f4651-lkp@intel.com
|
|
Commit 00b27634bc471("epoll: replace gotos with a proper loop") refactored
ep_poll and always feeds ep_busy_loop with a time_out value of 0, nonblock
mode for ep_busy_loop has sunk since, IOW nonblock mode checking has been
taken over by ep_poll itself, codes snipped:
static int ep_poll(struct eventpoll *ep...
{
...
if (timed_out)
return 0;
eavail = ep_busy_loop(ep, timed_out);
...
}
Given this fact codes can be simplified a bit for ep_busy_loop.
Signed-off-by: Lin Feng <linf@wangsu.com>
Link: https://lore.kernel.org/r/20250227033412.5873-1-linf@wangsu.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
DMA areas are not necessarily backed by struct page, so we cannot
rely on it for deferred I/O. Allocate a shadow buffer for drivers
that require deferred I/O and use it as framebuffer memory.
Fixes driver errors about being "Unable to handle kernel NULL pointer
dereference at virtual address" or "Unable to handle kernel paging
request at virtual address".
The patch splits drm_fbdev_dma_driver_fbdev_probe() in an initial
allocation, which creates the DMA-backed buffer object, and a tail
that sets up the fbdev data structures. There is a tail function for
direct memory mappings and a tail function for deferred I/O with
the shadow buffer.
It is no longer possible to use deferred I/O without shadow buffer.
It can be re-added if there exists a reliably test for usable struct
page in the allocated DMA-backed buffer object.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reported-by: Nuno Gonçalves <nunojpg@gmail.com>
CLoses: https://lore.kernel.org/dri-devel/CAEXMXLR55DziAMbv_+2hmLeH-jP96pmit6nhs6siB22cpQFr9w@mail.gmail.com/
Tested-by: Nuno Gonçalves <nunojpg@gmail.com>
Fixes: 5ab91447aa13 ("drm/tiny/ili9225: Use fbdev-dma")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: <stable@vger.kernel.org> # v6.11+
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241211090643.74250-1-tzimmermann@suse.de
|
|
NeilBrown <neilb@suse.de> says:
These two patches are cleanup are dependencies for my mkdir changes and
subsequence directory locking changes.
* patches from https://lore.kernel.org/r/20250226062135.2043651-1-neilb@suse.de: (2 commits)
nfsd: drop fh_update() from S_IFDIR branch of nfsd_create_locked()
nfs/vfs: discard d_exact_alias()
Link: https://lore.kernel.org/r/20250226062135.2043651-1-neilb@suse.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Watching mount namespaces for changes (mount, umount, move mount) was added
by previous patches.
This patch adds the file/watch_mountns permission that can be applied to
nsfs files (/proc/$$/ns/mnt), making it possible to allow or deny watching
a particular namespace for changes.
Suggested-by: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/all/CAHC9VhTOmCjCSE2H0zwPOmpFopheexVb6jyovz92ZtpKtoVv6A@mail.gmail.com/
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Link: https://lore.kernel.org/r/20250224154836.958915-1-mszeredi@redhat.com
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This commit causes a hard crash on sdm845 and likely other platforms.
Revert it until a proper fix is found.
This reverts commit 57a7138d0627: ("dmaengine: qcom: bam_dma: Avoid writing
unavailable register")
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Fixes: 57a7138d0627 ("dmaengine: qcom: bam_dma: Avoid writing unavailable register")
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on sdm845-DB845c
Tested-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20250208223112.142567-1-caleb.connolly@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Tariq Toukan says:
====================
mlx5 misc fixes 2025-02-25
This small patchset provides misc bug fixes from the team to the mlx5
core driver.
====================
Link: https://patch.msgid.link/20250225072608.526866-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
irq_pool_alloc() debug print can print a null string.
Fix it by providing a default string to print.
Fixes: 71e084e26414 ("net/mlx5: Allocating a pool of MSI-X vectors for SFs")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501141055.SwfIphN0-lkp@intel.com/
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20250225072608.526866-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Restore the `trace_mlx5_esw_vport_qos_create` event when creating
the vport scheduling element. This trace event was lost during
refactoring.
Fixes: be034baba83e ("net/mlx5: Make vport QoS enablement more flexible for future extensions")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250225072608.526866-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When enabling vport QoS fails, the scheduling node was never freed,
causing a leak.
Add the missing free and reset the vport scheduling node pointer to
NULL.
Fixes: be034baba83e ("net/mlx5: Make vport QoS enablement more flexible for future extensions")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250225072608.526866-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Non IP flow, with vlan tag not working as expected while
running below command for vlan-priority. fixed that.
ethtool -N eth1 flow-type ether vlan 0x8000 vlan-mask 0x1fff action 0 loc 0
Fixes: 1274daede3ef ("net: mvpp2: cls: Add steering based on vlan Id and priority.")
Signed-off-by: Harshal Chaudhari <hchaudhari@marvell.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250225042058.2643838-1-hchaudhari@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After running the 'sendmsg02' program of Linux Test Project (LTP),
kmemleak reports the following memory leak:
# cat /sys/kernel/debug/kmemleak
unreferenced object 0xffff888243866800 (size 2048):
comm "sendmsg02", pid 67, jiffies 4294903166
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 5e 00 00 00 00 00 00 00 ........^.......
01 00 07 40 00 00 00 00 00 00 00 00 00 00 00 00 ...@............
backtrace (crc 7e96a3f2):
kmemleak_alloc+0x56/0x90
kmem_cache_alloc_noprof+0x209/0x450
sk_prot_alloc.constprop.0+0x60/0x160
sk_alloc+0x32/0xc0
unix_create1+0x67/0x2b0
unix_create+0x47/0xa0
__sock_create+0x12e/0x200
__sys_socket+0x6d/0x100
__x64_sys_socket+0x1b/0x30
x64_sys_call+0x7e1/0x2140
do_syscall_64+0x54/0x110
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Commit 689c398885cc ("af_unix: Defer sock_put() to clean up path in
unix_dgram_sendmsg().") defers sock_put() in the error handling path.
However, it fails to account for the condition 'msg->msg_namelen != 0',
resulting in a memory leak when the code jumps to the 'lookup' label.
Fix issue by calling sock_put() if 'msg->msg_namelen != 0' is met.
Fixes: 689c398885cc ("af_unix: Defer sock_put() to clean up path in unix_dgram_sendmsg().")
Signed-off-by: Adrian Huang <ahuang12@lenovo.com>
Acked-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250225021457.1824-1-ahuang12@lenovo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
napi_schedule() is expected to be called either:
* From an interrupt, where raised softirqs are handled on IRQ exit
* From a softirq disabled section, where raised softirqs are handled on
the next call to local_bh_enable().
* From a softirq handler, where raised softirqs are handled on the next
round in do_softirq(), or further deferred to a dedicated kthread.
Other bare tasks context may end up ignoring the raised NET_RX vector
until the next random softirq handling opportunity, which may not
happen before a while if the CPU goes idle afterwards with the tick
stopped.
Such "misuses" have been detected on several places thanks to messages
of the kind:
"NOHZ tick-stop error: local softirq work is pending, handler #08!!!"
For example:
__raise_softirq_irqoff
__napi_schedule
rtl8152_runtime_resume.isra.0
rtl8152_resume
usb_resume_interface.isra.0
usb_resume_both
__rpm_callback
rpm_callback
rpm_resume
__pm_runtime_resume
usb_autoresume_device
usb_remote_wakeup
hub_event
process_one_work
worker_thread
kthread
ret_from_fork
ret_from_fork_asm
And also:
* drivers/net/usb/r8152.c::rtl_work_func_t
* drivers/net/netdevsim/netdev.c::nsim_start_xmit
There is a long history of issues of this kind:
019edd01d174 ("ath10k: sdio: Add missing BH locking around napi_schdule()")
330068589389 ("idpf: disable local BH when scheduling napi for marker packets")
e3d5d70cb483 ("net: lan78xx: fix "softirq work is pending" error")
e55c27ed9ccf ("mt76: mt7615: add missing bh-disable around rx napi schedule")
c0182aa98570 ("mt76: mt7915: add missing bh-disable around tx napi enable/schedule")
970be1dff26d ("mt76: disable BH around napi_schedule() calls")
019edd01d174 ("ath10k: sdio: Add missing BH locking around napi_schdule()")
30bfec4fec59 ("can: rx-offload: can_rx_offload_threaded_irq_finish(): add new function to be called from threaded interrupt")
e63052a5dd3c ("mlx5e: add add missing BH locking around napi_schdule()")
83a0c6e58901 ("i40e: Invoke softirqs after napi_reschedule")
bd4ce941c8d5 ("mlx4: Invoke softirqs after napi_reschedule")
8cf699ec849f ("mlx4: do not call napi_schedule() without care")
ec13ee80145c ("virtio_net: invoke softirqs after __napi_schedule")
This shows that relying on the caller to arrange a proper context for
the softirqs to be handled while calling napi_schedule() is very fragile
and error prone. Also fixing them can also prove challenging if the
caller may be called from different kinds of contexts.
Therefore fix this from napi_schedule() itself with waking up ksoftirqd
when softirqs are raised from task contexts.
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reported-by: Jakub Kicinski <kuba@kernel.org>
Reported-by: Francois Romieu <romieu@fr.zoreil.com>
Closes: https://lore.kernel.org/lkml/354a2690-9bbf-4ccb-8769-fa94707a9340@molgen.mpg.de/
Cc: Breno Leitao <leitao@debian.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250223221708.27130-1-frederic@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In certain cases, napi_get_frags() returns an skb that points to an old
received fragment, This skb may have its skb->ip_summed, csum, and other
fields set from previous fragment handling.
Some network drivers set skb->ip_summed to either CHECKSUM_COMPLETE or
CHECKSUM_UNNECESSARY when getting skb from napi_get_frags(), while
others only set skb->ip_summed when RX checksum offload is enabled on
the device, and do not set any value for skb->ip_summed when hardware
checksum offload is disabled, assuming that the skb->ip_summed
initiated to zero by napi_reuse_skb, ionic driver for example will
ignore/unset any value for the ip_summed filed if HW checksum offload is
disabled, and if we have a situation where the user disables the
checksum offload during a traffic that could lead to the following
errors shown in the kernel logs:
<IRQ>
dump_stack_lvl+0x34/0x48
__skb_gro_checksum_complete+0x7e/0x90
tcp6_gro_receive+0xc6/0x190
ipv6_gro_receive+0x1ec/0x430
dev_gro_receive+0x188/0x360
? ionic_rx_clean+0x25a/0x460 [ionic]
napi_gro_frags+0x13c/0x300
? __pfx_ionic_rx_service+0x10/0x10 [ionic]
ionic_rx_service+0x67/0x80 [ionic]
ionic_cq_service+0x58/0x90 [ionic]
ionic_txrx_napi+0x64/0x1b0 [ionic]
__napi_poll+0x27/0x170
net_rx_action+0x29c/0x370
handle_softirqs+0xce/0x270
__irq_exit_rcu+0xa3/0xc0
common_interrupt+0x80/0xa0
</IRQ>
This inconsistency sometimes leads to checksum validation issues in the
upper layers of the network stack.
To resolve this, this patch clears the skb->ip_summed value for each
reused skb in by napi_reuse_skb(), ensuring that the caller is responsible
for setting the correct checksum status. This eliminates potential
checksum validation issues caused by improper handling of
skb->ip_summed.
Fixes: 76620aafd66f ("gro: New frags interface to avoid copying shinfo")
Signed-off-by: Mohammad Heib <mheib@redhat.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250225112852.2507709-1-mheib@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When a queue is stopped using the ndo queue API, before
destroying its page pool, the associated NAPI instance
needs to be unlinked to avoid warnings.
Handle this by calling page_pool_disable_direct_recycling()
when stopping a queue.
Cc: stable@vger.kernel.org
Fixes: ebdfae0d377b ("gve: adopt page pool for DQ RDA mode")
Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250226003526.1546854-1-hramamurthy@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Breno Leitao reported the splat below. [0]
Commit 65161fb544aa ("net: Fix dev_net(dev) race in
unregister_netdevice_notifier_dev_net().") added the
DEBUG_NET_WARN_ON_ONCE(), assuming that the netdev is not
registered before register_netdevice_notifier_dev_net().
But the assumption was simply wrong.
Let's use rtnl_net_dev_lock() in register_netdevice_notifier_dev_net().
[0]:
WARNING: CPU: 25 PID: 849 at net/core/dev.c:2150 register_netdevice_notifier_dev_net (net/core/dev.c:2150)
<TASK>
? __warn (kernel/panic.c:242 kernel/panic.c:748)
? register_netdevice_notifier_dev_net (net/core/dev.c:2150)
? register_netdevice_notifier_dev_net (net/core/dev.c:2150)
? report_bug (lib/bug.c:? lib/bug.c:219)
? handle_bug (arch/x86/kernel/traps.c:285)
? exc_invalid_op (arch/x86/kernel/traps.c:309)
? asm_exc_invalid_op (./arch/x86/include/asm/idtentry.h:621)
? register_netdevice_notifier_dev_net (net/core/dev.c:2150)
? register_netdevice_notifier_dev_net (./include/net/net_namespace.h:406 ./include/linux/netdevice.h:2663 net/core/dev.c:2144)
mlx5e_mdev_notifier_event+0x9f/0xf0 mlx5_ib
notifier_call_chain.llvm.12241336988804114627 (kernel/notifier.c:85)
blocking_notifier_call_chain (kernel/notifier.c:380)
mlx5_core_uplink_netdev_event_replay (drivers/net/ethernet/mellanox/mlx5/core/main.c:352)
mlx5_ib_roce_init.llvm.12447516292400117075+0x1c6/0x550 mlx5_ib
mlx5r_probe+0x375/0x6a0 mlx5_ib
? kernfs_put (./include/linux/instrumented.h:96 ./include/linux/atomic/atomic-arch-fallback.h:2278 ./include/linux/atomic/atomic-instrumented.h:1384 fs/kernfs/dir.c:557)
? auxiliary_match_id (drivers/base/auxiliary.c:174)
? mlx5r_mp_remove+0x160/0x160 mlx5_ib
really_probe (drivers/base/dd.c:? drivers/base/dd.c:658)
driver_probe_device (drivers/base/dd.c:830)
__driver_attach (drivers/base/dd.c:1217)
bus_for_each_dev (drivers/base/bus.c:369)
? driver_attach (drivers/base/dd.c:1157)
bus_add_driver (drivers/base/bus.c:679)
driver_register (drivers/base/driver.c:249)
Fixes: 7fb1073300a2 ("net: Hold rtnl_net_lock() in (un)?register_netdevice_notifier_dev_net().")
Reported-by: Breno Leitao <leitao@debian.org>
Closes: https://lore.kernel.org/netdev/20250224-noisy-cordial-roadrunner-fad40c@leitao/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Tested-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250225211023.96448-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull bcachefs fixes from Kent Overstreet:
"A couple small ones, the main user visible changes/fixes are:
- Fix a bug where truncate would rarely fail and return 1
- Revert the directory i_size code: this turned out to have a number
of issues that weren't noticed because the fsck code wasn't
correctly reporting errors (ouch), and we're late enough in the
cycle that it can just wait until 6.15"
* tag 'bcachefs-2025-02-26' of git://evilpiepirate.org/bcachefs:
bcachefs: Fix truncate sometimes failing and returning 1
bcachefs: Fix deadlock
bcachefs: Check for -BCH_ERR_open_buckets_empty in journal resize
bcachefs: Revert directory i_size
bcachefs: fix bch2_extent_ptr_eq()
bcachefs: Fix memmove when move keys down
bcachefs: print op->nonce on data update inconsistency
|
|
__bch_truncate_folio() may return 1 to indicate dirtyness of the folio
being truncated, needed for fpunch to get the i_size writes correct.
But truncate was forgetting to clear ret, and sometimes returning it as
an error.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This fixes two deadlocks:
1.pcpu_alloc_mutex involved one as pointed by syzbot[1]
2.recursion deadlock.
The root cause is that we hold the bc lock during alloc_percpu, fix it
by following the pattern used by __btree_node_mem_alloc().
[1] https://lore.kernel.org/all/66f97d9a.050a0220.6bad9.001d.GAE@google.com/T/
Reported-by: syzbot+fe63f377148a6371a9db@syzkaller.appspotmail.com
Tested-by: syzbot+fe63f377148a6371a9db@syzkaller.appspotmail.com
Signed-off-by: Alan Huang <mmpgouride@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This fixes occasional failures from journal resize.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This turned out to have several bugs, which were missed because the fsck
code wasn't properly reporting errors - whoops.
Kicking it out for now, hopefully it can make 6.15.
Cc: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
When the range of present physical memory is sufficiently small enough
and the reserved address space for the linear map is sufficiently large
enough, The linear map base address is randomized in
arm64_memblock_init().
Prior to commit 62cffa496aac ("arm64/mm: Override PARange for !LPA2 and
use it consistently"), we decided if the sizes were suitable with the
help of the raw mmfr0.parange. But the commit changed this to use the
sanitized version instead. But the function runs before the register has
been sanitized so this returns 0, interpreted as a parange of 32 bits.
Some fun wrapping occurs and the logic concludes that there is enough
room to randomize the linear map base address, when really there isn't.
So the top of the linear map ends up outside the reserved address space.
Since the PA range cannot be overridden in the first place, restore the
mmfr0 reading logic to its state prior to 62cffa496aac, where the raw
register value is used.
Reported-by: Luiz Capitulino <luizcap@redhat.com>
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Closes: https://lore.kernel.org/all/a3d9acbe-07c2-43b6-9ba9-a7585f770e83@redhat.com/
Fixes: 62cffa496aac ("arm64/mm: Override PARange for !LPA2 and use it consistently")
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Link: https://lore.kernel.org/r/20250225114638.2038006-1-ryan.roberts@arm.com
Cc: stable@vger.kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add error message when the number of entry argument exceeds the
maximum size of entry data.
This is currently checked when registering fprobe, but in this case
no error message is shown in the error_log file.
Link: https://lore.kernel.org/all/174055074269.4079315.17809232650360988538.stgit@mhiramat.tok.corp.google.com/
Fixes: 25f00e40ce79 ("tracing/probes: Support $argN in return probe (kprobe and fprobe)")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Commit 57a7e6de9e30 ("tracing/fprobe: Support raw tracepoints on
future loaded modules") allows user to set a tprobe on non-exist
tracepoint but it does not check the tracepoint name is acceptable.
So it leads tprobe has a wrong character for events (e.g. with
subsystem prefix). In this case, the event is not shown in the
events directory.
Reject such invalid tracepoint name.
The tracepoint name must consist of alphabet or digit or '_'.
Link: https://lore.kernel.org/all/174055073461.4079315.15875502830565214255.stgit@mhiramat.tok.corp.google.com/
Fixes: 57a7e6de9e30 ("tracing/fprobe: Support raw tracepoints on future loaded modules")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: stable@vger.kernel.org
|
|
Fix a memory leak when a tprobe is defined with $retval. This
combination is not allowed, but the parse_symbol_and_return() does
not free the *symbol which should not be used if it returns the error.
Thus, it leaks the *symbol memory in that error path.
Link: https://lore.kernel.org/all/174055072650.4079315.3063014346697447838.stgit@mhiramat.tok.corp.google.com/
Fixes: ce51e6153f77 ("tracing: fprobe-event: Fix to check tracepoint event and return")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: stable@vger.kernel.org
|
|
The parent of disp_cc_mdss_byte0_intf_clk clock should not propagate up
the rates, because this messes up entire clock hierarchy when setting
clock rates in MSM DSI driver.
The dsi_link_clk_set_rate_6g() first sets entire clock hierarchy rates
via dev_pm_opp_set_rate() on byte clock and then sets individual clock
rates, like pixel and byte_intf clocks, to proper frequencies. Having
CLK_SET_RATE_PARENT caused that entire tree was re-calced and the byte
clock received halved frequency. Drop CLK_SET_RATE_PARENT to fix this
and align with SM8550 and SM8650.
Fixes: f1080d8dab0f ("clk: qcom: dispcc-sm8750: Add SM8750 Display clock controller")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250129154519.209791-1-krzysztof.kozlowski@linaro.org
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Small ufs fixes and a core change to clear the command private area on
every retry (which fixes a reported bug in virtio_scsi)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: bsg: Fix crash when arpmb command fails
scsi: ufs: core: Set default runtime/system PM levels before ufshcd_hba_init()
scsi: core: Clear driver private data when retrying request
scsi: ufs: core: Fix ufshcd_is_ufs_dev_busy() and ufshcd_eh_timed_out()
|
|
The commit b1f8921dfbaa
("i2c: amd-asf: Clear remote IRR bit to get successive interrupt")
introduced a method to enable successive interrupts but inadvertently
omitted the necessary write to the EOI register, resulting in a failure to
receive successive interrupts.
Fix this by adding the required write to the EOI register.
Fixes: b1f8921dfbaa ("i2c: amd-asf: Clear remote IRR bit to get successive interrupt")
Cc: stable@vger.kernel.org # v6.13+
Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Fixes: 9b25419ad397 ("i2c: amd-asf: Add routine to handle the ASF slave process")
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250219135747.3251182-1-Shyam-sundar.S-k@amd.com
|
|
According to the chip manual, the I2C register access type of
Loongson-2K2000/LS7A is "B", so we can only access registers in byte
form (readb()/writeb()).
Although Loongson-2K0500/Loongson-2K1000 do not have similar
constraints, register accesses in byte form also behave correctly.
Also, in hardware, the frequency division registers are defined as two
separate registers (high 8-bit and low 8-bit), so we just access them
directly as bytes.
Fixes: 015e61f0bffd ("i2c: ls2x: Add driver for Loongson-2K/LS7A I2C controller")
Co-developed-by: Hongliang Wang <wanghongliang@loongson.cn>
Signed-off-by: Hongliang Wang <wanghongliang@loongson.cn>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Cc: stable@vger.kernel.org # v6.3+
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250220125612.1910990-1-zhoubinbin@loongson.cn
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue update from Tejun Heo:
"This contains a patch improve debug visibility.
While it isn't a fix, the change carries virtually no risk and makes
it substantially easier to chase down a class of problems"
* tag 'wq-for-6.14-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Log additional details when rejecting work
|
|
The customer reports that there is a soft lockup issue related to
the i2c driver. After checking, the i2c module was doing a tx transfer
and the bmc machine reboots in the middle of the i2c transaction, the i2c
module keeps the status without being reset.
Due to such an i2c module status, the i2c irq handler keeps getting
triggered since the i2c irq handler is registered in the kernel booting
process after the bmc machine is doing a warm rebooting.
The continuous triggering is stopped by the soft lockup watchdog timer.
Disable the interrupt enable bit in the i2c module before calling
devm_request_irq to fix this issue since the i2c relative status bit
is read-only.
Here is the soft lockup log.
[ 28.176395] watchdog: BUG: soft lockup - CPU#0 stuck for 26s! [swapper/0:1]
[ 28.183351] Modules linked in:
[ 28.186407] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.15.120-yocto-s-dirty-bbebc78 #1
[ 28.201174] pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 28.208128] pc : __do_softirq+0xb0/0x368
[ 28.212055] lr : __do_softirq+0x70/0x368
[ 28.215972] sp : ffffff8035ebca00
[ 28.219278] x29: ffffff8035ebca00 x28: 0000000000000002 x27: ffffff80071a3780
[ 28.226412] x26: ffffffc008bdc000 x25: ffffffc008bcc640 x24: ffffffc008be50c0
[ 28.233546] x23: ffffffc00800200c x22: 0000000000000000 x21: 000000000000001b
[ 28.240679] x20: 0000000000000000 x19: ffffff80001c3200 x18: ffffffffffffffff
[ 28.247812] x17: ffffffc02d2e0000 x16: ffffff8035eb8b40 x15: 00001e8480000000
[ 28.254945] x14: 02c3647e37dbfcb6 x13: 02c364f2ab14200c x12: 0000000002c364f2
[ 28.262078] x11: 00000000fa83b2da x10: 000000000000b67e x9 : ffffffc008010250
[ 28.269211] x8 : 000000009d983d00 x7 : 7fffffffffffffff x6 : 0000036d74732434
[ 28.276344] x5 : 00ffffffffffffff x4 : 0000000000000015 x3 : 0000000000000198
[ 28.283476] x2 : ffffffc02d2e0000 x1 : 00000000000000e0 x0 : ffffffc008bdcb40
[ 28.290611] Call trace:
[ 28.293052] __do_softirq+0xb0/0x368
[ 28.296625] __irq_exit_rcu+0xe0/0x100
[ 28.300374] irq_exit+0x14/0x20
[ 28.303513] handle_domain_irq+0x68/0x90
[ 28.307440] gic_handle_irq+0x78/0xb0
[ 28.311098] call_on_irq_stack+0x20/0x38
[ 28.315019] do_interrupt_handler+0x54/0x5c
[ 28.319199] el1_interrupt+0x2c/0x4c
[ 28.322777] el1h_64_irq_handler+0x14/0x20
[ 28.326872] el1h_64_irq+0x74/0x78
[ 28.330269] __setup_irq+0x454/0x780
[ 28.333841] request_threaded_irq+0xd0/0x1b4
[ 28.338107] devm_request_threaded_irq+0x84/0x100
[ 28.342809] npcm_i2c_probe_bus+0x188/0x3d0
[ 28.346990] platform_probe+0x6c/0xc4
[ 28.350653] really_probe+0xcc/0x45c
[ 28.354227] __driver_probe_device+0x8c/0x160
[ 28.358578] driver_probe_device+0x44/0xe0
[ 28.362670] __driver_attach+0x124/0x1d0
[ 28.366589] bus_for_each_dev+0x7c/0xe0
[ 28.370426] driver_attach+0x28/0x30
[ 28.373997] bus_add_driver+0x124/0x240
[ 28.377830] driver_register+0x7c/0x124
[ 28.381662] __platform_driver_register+0x2c/0x34
[ 28.386362] npcm_i2c_init+0x3c/0x5c
[ 28.389937] do_one_initcall+0x74/0x230
[ 28.393768] kernel_init_freeable+0x24c/0x2b4
[ 28.398126] kernel_init+0x28/0x130
[ 28.401614] ret_from_fork+0x10/0x20
[ 28.405189] Kernel panic - not syncing: softlockup: hung tasks
[ 28.411011] SMP: stopping secondary CPUs
[ 28.414933] Kernel Offset: disabled
[ 28.418412] CPU features: 0x00000000,00000802
[ 28.427644] Rebooting in 20 seconds..
Fixes: 56a1485b102e ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver")
Signed-off-by: Tyrone Ting <kfting@nuvoton.com>
Cc: <stable@vger.kernel.org> # v5.8+
Reviewed-by: Tali Perry <tali.perry1@gmail.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250220040029.27596-2-kfting@nuvoton.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fix from Tejun Heo:
"pick_task_scx() has a workaround to avoid stalling when the fair
class's balance() says yes but pick_task() says no.
The workaround was incorrectly deciding to keep the prev taks running
if the task is on SCX even when the task is in a sleeping state, which
can lead to several confusing failure modes.
Fix it by testing the prev task is currently queued on SCX instead"
* tag 'sched_ext-for-6.14-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Fix pick_task_scx() picking non-queued tasks when it's called without balance()
|
|
One difference here with other pseudo-firmware bitmap registers
is that the default/reset value for the supported hypercall
function-ids is 0 at present. Hence, modify the test accordingly.
Reviewed-by: Sebastian Ott <sebott@redhat.com>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Link: https://lore.kernel.org/r/20250221140229.12588-7-shameerali.kolothum.thodi@huawei.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Retrieve any migration target implementation CPUs using the hypercall
and enable associated errata.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Sebastian Ott <sebott@redhat.com>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250221140229.12588-6-shameerali.kolothum.thodi@huawei.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Subsequent patch will add target implementation CPU support and that
will require _midr_in_range_list() to access new data. To avoid
exporting the data make _midr_in_range_list() a normal function and
export it.
No functional changes intended.
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250221140229.12588-5-shameerali.kolothum.thodi@huawei.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
The vendor_hyp_bmap bitmap holds the information about the Vendor Hyp
services available to the user space and can be get/set using
{G, S}ET_ONE_REG interfaces. This is done using the pseudo-firmware
bitmap register KVM_REG_ARM_VENDOR_HYP_BMAP.
At present, this bitmap is a 64 bit one and since the function numbers
for newly added DISCOVER_IPML_* hypercalls are 64-65, introduce
another pseudo-firmware bitmap register KVM_REG_ARM_VENDOR_HYP_BMAP_2.
Reviewed-by: Sebastian Ott <sebott@redhat.com>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Link: https://lore.kernel.org/r/20250221140229.12588-4-shameerali.kolothum.thodi@huawei.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
If the Guest requires migration to multiple targets, these hypercalls
will provide a way to retrieve the target CPU implementations from
the user space VMM.
Subsequent patch will use this to enable the associated errata.
Suggested-by: Oliver Upton <oliver.upton@linux.dev>
Suggested-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Sebastian Ott <sebott@redhat.com>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Link: https://lore.kernel.org/r/20250221140229.12588-3-shameerali.kolothum.thodi@huawei.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
These changes lay the groundwork for adding support for guest kernels,
allowing them to leverage target CPU implementations provided by the
VMM.
No functional changes intended.
Suggested-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Sebastian Ott <sebott@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250221140229.12588-2-shameerali.kolothum.thodi@huawei.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
One of the not-so-obvious requirements for restoring a VM is ensuring
that the vITS has been restored _before_ creating any irqbypass mappings.
This is because KVM needs to get the guest translation for MSIs to
correctly assemble the vLPI mapping getting installed in the physical
ITS.
Document the restore ordering requirements necessary for GICv4 vLPI
injection to work.
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250226183124.82094-5-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Continuing with the theme of broken VMMs and guests, irqbypass
registration can fail if the virtual ITS lacks a translation for the
MSI. Either the guest hasn't mapped it or userspace may have forgotten
to restore the ITS.
Exit silently and allow irqbypass configuration to succeed. As a reward
for ingenuity, LPIs are demoted to software injection.
Tested-by: Sudheer Dantuluri <dantuluris@google.com>
Fixes: 196b136498b3 ("KVM: arm/arm64: GICv4: Wire mapping/unmapping of VLPIs in VFIO irq bypass")
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250226183124.82094-4-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
The VMM or guest can easily screw up GICv4 vLPI injection by
misconfiguring the MSI or the virtual ITS. Don't fuss over it; limit the
WARN in vgic_v4_unset_forwarding() to fire in the worrying case where an
unrelated HW IRQ was mapped to a vLPI.
Reported-by: Sudheer Dantuluri <dantuluris@google.com>
Tested-by: Sudheer Dantuluri <dantuluris@google.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250226183124.82094-3-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Some 'creative' VMMs out there may assign a VFIO MSI eventfd to an SPI
routing entry.
And yes, I can already hear you shouting about possibly driving a level
interrupt with an edge-sensitive one. You know who you are.
This works for the most part, and interrupt injection winds up taking
the software path. However, when running on GICv4-enabled hardware, KVM
erroneously attempts to setup LPI forwarding, even though the KVM
routing isn't an MSI.
Thanks to misuse of a union, the MSI destination is unlikely to match any
ITS in the VM and kvm_vgic_v4_set_forwarding() bails early. Later on when
the VM is being torn down, this half-configured state triggers the
WARN_ON() in kvm_vgic_v4_unset_forwarding() due to the fact that no HW
IRQ was ever assigned.
Avoid the whole mess by preventing SPI routing entries from getting into
the LPI forwarding helpers.
Reported-by: Sudheer Dantuluri <dantuluris@google.com>
Tested-by: Sudheer Dantuluri <dantuluris@google.com>
Fixes: 196b136498b3 ("KVM: arm/arm64: GICv4: Wire mapping/unmapping of VLPIs in VFIO irq bypass")
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250226183124.82094-2-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
This reverts commit 16767502aa990cca2cb7d1372b31d328c4c85b40.
Nolibc gained support for uname(2) and sscanf(3) which are the
dependencies of ksft_min_kernel_version().
So re-enable support for ksft_min_kernel_version() under nolibc.
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250209-nolibc-scanf-v2-2-c29dea32f1cd@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
These functions are used often, also in selftests.
sscanf() itself is also used by kselftest.h itself.
The implementation is limited and only supports numeric arguments.
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250209-nolibc-scanf-v2-1-c29dea32f1cd@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
Pull NFS client fixes from Anna Schumaker:
"Stable Fixes:
- O_DIRECT writes should adjust file length
Other Bugfixes:
- Adjust delegated timestamps for O_DIRECT reads and writes
- Prevent looping due to rpc_signal_task() races
- Fix a deadlock when recovering state on a sillyrenamed file
- Properly handle -ETIMEDOUT errors from tlshd
- Suppress build warnings for unused procfs functions
- Fix memory leak of lsm_contexts"
* tag 'nfs-for-6.14-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
lsm,nfs: fix memory leak of lsm_context
sunrpc: suppress warnings for unused procfs functions
SUNRPC: Handle -ETIMEDOUT return from tlshd
NFSv4: Fix a deadlock when recovering state on a sillyrenamed file
SUNRPC: Prevent looping due to rpc_signal_task() races
NFS: Adjust delegated timestamps for O_DIRECT reads and writes
NFS: O_DIRECT writes must check and adjust the file length
|