summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-12-01net: phy-micrel: check return code in flp center functionMax Uvarov
Fix obvious typo that first return value is set but not checked. Signed-off-by: Max Uvarov <muvarov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-01tipc: call tipc_rcv() only if bearer is up in tipc_udp_recv()Tommi Rantala
Remove the second tipc_rcv() call in tipc_udp_recv(). We have just checked that the bearer is not up, and calling tipc_rcv() with a bearer that is not up leads to a TIPC div-by-zero crash in tipc_node_calculate_timer(). The crash is rare in practice, but can happen like this: We're enabling a bearer, but it's not yet up and fully initialized. At the same time we receive a discovery packet, and in tipc_udp_recv() we end up calling tipc_rcv() with the not-yet-initialized bearer, causing later the div-by-zero crash in tipc_node_calculate_timer(). Jon Maloy explains the impact of removing the second tipc_rcv() call: "link setup in the worst case will be delayed until the next arriving discovery messages, 1 sec later, and this is an acceptable delay." As the tipc_rcv() call is removed, just leave the function via the rcu_out label, so that we will kfree_skb(). [ 12.590450] Own node address <1.1.1>, network identity 1 [ 12.668088] divide error: 0000 [#1] SMP [ 12.676952] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.14.2-dirty #1 [ 12.679225] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-2.fc27 04/01/2014 [ 12.682095] task: ffff8c2a761edb80 task.stack: ffffa41cc0cac000 [ 12.684087] RIP: 0010:tipc_node_calculate_timer.isra.12+0x45/0x60 [tipc] [ 12.686486] RSP: 0018:ffff8c2a7fc838a0 EFLAGS: 00010246 [ 12.688451] RAX: 0000000000000000 RBX: ffff8c2a5b382600 RCX: 0000000000000000 [ 12.691197] RDX: 0000000000000000 RSI: ffff8c2a5b382600 RDI: ffff8c2a5b382600 [ 12.693945] RBP: ffff8c2a7fc838b0 R08: 0000000000000001 R09: 0000000000000001 [ 12.696632] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8c2a5d8949d8 [ 12.699491] R13: ffffffff95ede400 R14: 0000000000000000 R15: ffff8c2a5d894800 [ 12.702338] FS: 0000000000000000(0000) GS:ffff8c2a7fc80000(0000) knlGS:0000000000000000 [ 12.705099] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 12.706776] CR2: 0000000001bb9440 CR3: 00000000bd009001 CR4: 00000000003606e0 [ 12.708847] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 12.711016] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 12.712627] Call Trace: [ 12.713390] <IRQ> [ 12.714011] tipc_node_check_dest+0x2e8/0x350 [tipc] [ 12.715286] tipc_disc_rcv+0x14d/0x1d0 [tipc] [ 12.716370] tipc_rcv+0x8b0/0xd40 [tipc] [ 12.717396] ? minmax_running_min+0x2f/0x60 [ 12.718248] ? dst_alloc+0x4c/0xa0 [ 12.718964] ? tcp_ack+0xaf1/0x10b0 [ 12.719658] ? tipc_udp_is_known_peer+0xa0/0xa0 [tipc] [ 12.720634] tipc_udp_recv+0x71/0x1d0 [tipc] [ 12.721459] ? dst_alloc+0x4c/0xa0 [ 12.722130] udp_queue_rcv_skb+0x264/0x490 [ 12.722924] __udp4_lib_rcv+0x21e/0x990 [ 12.723670] ? ip_route_input_rcu+0x2dd/0xbf0 [ 12.724442] ? tcp_v4_rcv+0x958/0xa40 [ 12.725039] udp_rcv+0x1a/0x20 [ 12.725587] ip_local_deliver_finish+0x97/0x1d0 [ 12.726323] ip_local_deliver+0xaf/0xc0 [ 12.726959] ? ip_route_input_noref+0x19/0x20 [ 12.727689] ip_rcv_finish+0xdd/0x3b0 [ 12.728307] ip_rcv+0x2ac/0x360 [ 12.728839] __netif_receive_skb_core+0x6fb/0xa90 [ 12.729580] ? udp4_gro_receive+0x1a7/0x2c0 [ 12.730274] __netif_receive_skb+0x1d/0x60 [ 12.730953] ? __netif_receive_skb+0x1d/0x60 [ 12.731637] netif_receive_skb_internal+0x37/0xd0 [ 12.732371] napi_gro_receive+0xc7/0xf0 [ 12.732920] receive_buf+0x3c3/0xd40 [ 12.733441] virtnet_poll+0xb1/0x250 [ 12.733944] net_rx_action+0x23e/0x370 [ 12.734476] __do_softirq+0xc5/0x2f8 [ 12.734922] irq_exit+0xfa/0x100 [ 12.735315] do_IRQ+0x4f/0xd0 [ 12.735680] common_interrupt+0xa2/0xa2 [ 12.736126] </IRQ> [ 12.736416] RIP: 0010:native_safe_halt+0x6/0x10 [ 12.736925] RSP: 0018:ffffa41cc0cafe90 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff4d [ 12.737756] RAX: 0000000000000000 RBX: ffff8c2a761edb80 RCX: 0000000000000000 [ 12.738504] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 12.739258] RBP: ffffa41cc0cafe90 R08: 0000014b5b9795e5 R09: ffffa41cc12c7e88 [ 12.740118] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000002 [ 12.740964] R13: ffff8c2a761edb80 R14: 0000000000000000 R15: 0000000000000000 [ 12.741831] default_idle+0x2a/0x100 [ 12.742323] arch_cpu_idle+0xf/0x20 [ 12.742796] default_idle_call+0x28/0x40 [ 12.743312] do_idle+0x179/0x1f0 [ 12.743761] cpu_startup_entry+0x1d/0x20 [ 12.744291] start_secondary+0x112/0x120 [ 12.744816] secondary_startup_64+0xa5/0xa5 [ 12.745367] Code: b9 f4 01 00 00 48 89 c2 48 c1 ea 02 48 3d d3 07 00 00 48 0f 47 d1 49 8b 0c 24 48 39 d1 76 07 49 89 14 24 48 89 d1 31 d2 48 89 df <48> f7 f1 89 c6 e8 81 6e ff ff 5b 41 5c 5d c3 66 90 66 2e 0f 1f [ 12.747527] RIP: tipc_node_calculate_timer.isra.12+0x45/0x60 [tipc] RSP: ffff8c2a7fc838a0 [ 12.748555] ---[ end trace 1399ab83390650fd ]--- [ 12.749296] Kernel panic - not syncing: Fatal exception in interrupt [ 12.750123] Kernel Offset: 0x13200000 from 0xffffffff82000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 12.751215] Rebooting in 60 seconds.. Fixes: c9b64d492b1f ("tipc: add replicast peer discovery") Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com> Cc: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-01tcp/dccp: block bh before arming time_wait timerEric Dumazet
Maciej Żenczykowski reported some panics in tcp_twsk_destructor() that might be caused by the following bug. timewait timer is pinned to the cpu, because we want to transition timwewait refcount from 0 to 4 in one go, once everything has been initialized. At the time commit ed2e92394589 ("tcp/dccp: fix timewait races in timer handling") was merged, TCP was always running from BH habdler. After commit 5413d1babe8f ("net: do not block BH while processing socket backlog") we definitely can run tcp_time_wait() from process context. We need to block BH in the critical section so that the pinned timer has still its purpose. This bug is more likely to happen under stress and when very small RTO are used in datacenter flows. Fixes: 5413d1babe8f ("net: do not block BH while processing socket backlog") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Maciej Żenczykowski <maze@google.com> Acked-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-01Merge branch 'sctp-prsctp-chunk-fixes'David S. Miller
Xin Long says: ==================== sctp: a couple of fixes for chunks abandoned in prsctp Now when abandoning chunks in prsctp, it doesn't consider for frags in one msg, which would cause peer can never receive the whole frags for one msg to get them reassembled, these pieces of this msg will stay in the reasm queue forever and block the following chunks' receiving. This patchset is to fix them in patch 2 and 3, and also fix another issue for prsctp in patch 1. ==================== Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-01sctp: do not abandon the other frags in unsent outq if one msg has ↵Xin Long
outstanding frags Now for the abandoned chunks in unsent outq, it would just free the chunks. Because no tsn is assigned to them yet, there's no need to send fwd tsn to peer, unlike for the abandoned chunks in sent outq. The problem is when parts of the msg have been sent and the other frags are still in unsent outq, if they are abandoned/dropped, the peer would never get this msg reassembled. So these frags in unsent outq can't be dropped if this msg already has outstanding frags. This patch does the check in sctp_chunk_abandoned and sctp_prsctp_prune_unsent. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-01sctp: abandon the whole msg if one part of a fragmented message is abandonedXin Long
As rfc3758#section-3.1 demands: A3) When a TSN is "abandoned", if it is part of a fragmented message, all other TSN's within that fragmented message MUST be abandoned at the same time. Besides, if it couldn't handle this, the rest frags would never get assembled in peer side. This patch supports it by adding abandoned flag in sctp_datamsg, when one chunk is being abandoned, set chunk->msg->abandoned as well. Next time when checking for abandoned, go checking chunk->msg->abandoned first. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-01sctp: only update outstanding_bytes for transmitted queue when doing ↵Xin Long
prsctp_prune Now outstanding_bytes is only increased when appending chunks into one packet and sending it at 1st time, while decreased when it is about to move into retransmit queue. It means outstanding_bytes value is already decreased for all chunks in retransmit queue. However sctp_prsctp_prune_sent is a common function to check the chunks in both transmitted and retransmit queue, it decrease outstanding_bytes when moving a chunk into abandoned queue from either of them. It could cause outstanding_bytes underflow, as it also decreases it's value for the chunks in retransmit queue. This patch fixes it by only updating outstanding_bytes for transmitted queue when pruning queues for prsctp prio policy, the same fix is also needed in sctp_check_transmitted. Fixes: 8dbdf1f5b09c ("sctp: implement prsctp PRIO policy") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-01Merge branch 'bpf-nfp-jmp-memcpy-improvements'Daniel Borkmann
Jiong Wang says: ==================== Currently, compiler will lower memcpy function call in XDP/eBPF C program into a sequence of eBPF load/store pairs for some scenarios. Compiler is thinking this "inline" optimiation is beneficial as it could avoid function call and also increase code locality. However, Netronome NPU is not an tranditional load/store architecture that doing a sequence of individual load/store actions are not efficient. This patch set tries to identify the load/store sequences composed of load/store pairs that comes from memcpy lowering, then accelerates them through NPU's Command Push Pull (CPP) instruction. This patch set registered an new optimization pass before doing the actual JIT work, it traverse through eBPF IR, once found candidate sequence then record the memory copy source, destination and length information in the first load instruction starting the sequence and marks all remaining instructions in the sequence into skipable status. Later, when JITing the first load instructoin, optimal instructions will be generated using those record information. For this safety of this transformation: - jump into the middle of the sequence will cancel the optimization. - overlapped memory access will cancel the optimization. - the load destination register still contains the same value as before the transformation. ==================== Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01nfp: bpf: detect load/store sequences lowered from memory copyJiong Wang
This patch add the optimization frontend, but adding a new eBPF IR scan pass "nfp_bpf_opt_ldst_gather". The pass will traverse the IR to recognize the load/store pairs sequences that come from lowering of memory copy builtins. The gathered memory copy information will be kept in the meta info structure of the first load instruction in the sequence and will be consumed by the optimization backend added in the previous patches. NOTE: a sequence with cross memory access doesn't qualify this optimization, i.e. if one load in the sequence will load from place that has been written by previous store. This is because when we turn the sequence into single CPP operation, we are reading all contents at once into NFP transfer registers, then write them out as a whole. This is not identical with what the original load/store sequence is doing. Detecting cross memory access for two random pointers will be difficult, fortunately under XDP/eBPF's restrictied runtime environment, the copy normally happen among map, packet data and stack, they do not overlap with each other. And for cases supported by NFP, cross memory access will only happen on PTR_TO_PACKET. Fortunately for this, there is ID information that we could do accurate memory alias check. Signed-off-by: Jiong Wang <jiong.wang@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01nfp: bpf: implement memory bulk copy for length bigger than 32-bytesJiong Wang
When the gathered copy length is bigger than 32-bytes and within 128-bytes (the maximum length a single CPP Pull/Push request can finish), the strategy of read/write are changeed into: * Read. - use direct reference mode when length is within 32-bytes. - use indirect mode when length is bigger than 32-bytes. * Write. - length <= 8-bytes use write8 (direct_ref). - length <= 32-byte and 4-bytes aligned use write32 (direct_ref). - length <= 32-bytes but not 4-bytes aligned use write8 (indirect_ref). - length > 32-bytes and 4-bytes aligned use write32 (indirect_ref). - length > 32-bytes and not 4-bytes aligned and <= 40-bytes use write32 (direct_ref) to finish the first 32-bytes. use write8 (direct_ref) to finish all remaining hanging part. - length > 32-bytes and not 4-bytes aligned use write32 (indirect_ref) to finish those 4-byte aligned parts. use write8 (direct_ref) to finish all remaining hanging part. Signed-off-by: Jiong Wang <jiong.wang@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01nfp: bpf: implement memory bulk copy for length within 32-bytesJiong Wang
For NFP, we want to re-group a sequence of load/store pairs lowered from memcpy/memmove into single memory bulk operation which then could be accelerated using NFP CPP bus. This patch extends the existing load/store auxiliary information by adding two new fields: struct bpf_insn *paired_st; s16 ldst_gather_len; Both fields are supposed to be carried by the the load instruction at the head of the sequence. "paired_st" is the corresponding store instruction at the head and "ldst_gather_len" is the gathered length. If "ldst_gather_len" is negative, then the sequence is doing memory load/store in descending order, otherwise it is in ascending order. We need this information to detect overlapped memory access. This patch then optimize memory bulk copy when the copy length is within 32-bytes. The strategy of read/write used is: * Read. Use read32 (direct_ref), always. * Write. - length <= 8-bytes write8 (direct_ref). - length <= 32-bytes and is 4-byte aligned write32 (direct_ref). - length <= 32-bytes but is not 4-byte aligned write8 (indirect_ref). NOTE: the optimization should not change program semantics. The destination register of the last load instruction should contain the same value before and after this optimization. Signed-off-by: Jiong Wang <jiong.wang@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01nfp: bpf: factor out is_mbpf_load & is_mbpf_storeJiong Wang
It is usual that we need to check if one BPF insn is for loading/storeing data from/to memory. Therefore, it makes sense to factor out related code to become common helper functions. Signed-off-by: Jiong Wang <jiong.wang@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01nfp: bpf: encode indirect commandsJakub Kicinski
Add support for emitting commands with field overwrites. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Jiong Wang <jiong.wang@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01nfp: bpf: correct the encoding for No-Dest immedJiong Wang
When immed is used with No-Dest, the emitter should use reg.dst instead of reg.areg for the destination, using the latter will actually encode register zero. Signed-off-by: Jiong Wang <jiong.wang@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01nfp: bpf: relax source operands checkJiong Wang
The NFP normally requires the source operands to be difference addressing modes, but we should rule out the very special NN_REG_NONE type. There are instruction that ignores both A/B operands, for example: local_csr_rd For these instructions, we might pass the same operand type, NN_REG_NONE, for both A/B operands. NOTE: in current NFP ISA, it is only possible for instructions with unrestricted operands to take none operands, but in case there is new and similar instructoin in restricted form, they would follow similar rules, so swreg_to_restricted is updated as well. Signed-off-by: Jiong Wang <jiong.wang@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01nfp: bpf: don't do ld/shifts combination if shifts are jump destinationJiong Wang
If any of the shift insns in the ld/shift sequence is jump destination, don't do combination. Signed-off-by: Jiong Wang <jiong.wang@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01nfp: bpf: don't do ld/mask combination if mask is jump destinationJiong Wang
If the mask insn in the ld/mask pair is jump destination, then don't do combination. Signed-off-by: Jiong Wang <jiong.wang@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01nfp: bpf: flag jump destination to guide insn combine optimizationsJiong Wang
NFP eBPF offload JIT engine is doing some instruction combine based optimizations which however must not be safe if the combined sequences are across basic block boarders. Currently, there are post checks during fixing jump destinations. If the jump destination is found to be eBPF insn that has been combined into another one, then JIT engine will raise error and abort. This is not optimal. The JIT engine ought to disable the optimization on such cross-bb-border sequences instead of abort. As there is no control flow information in eBPF infrastructure that we can't do basic block based optimizations, this patch extends the existing jump destination record pass to also flag the jump destination, then in instruction combine passes we could skip the optimizations if insns in the sequence are jump targets. Suggested-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Jiong Wang <jiong.wang@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01nfp: bpf: record jump destination to simplify jump fixupJiong Wang
eBPF insns are internally organized as dual-list inside NFP offload JIT. Random access to an insn needs to be done by either forward or backward traversal along the list. One place we need to do such traversal is at nfp_fixup_branches where one traversal is needed for each jump insn to find the destination. Such traversals could be avoided if jump destinations are collected through a single travesal in a pre-scan pass, and such information could also be useful in other places where jump destination info are needed. This patch adds such jump destination collection in nfp_prog_prepare. Suggested-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Jiong Wang <jiong.wang@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01nfp: bpf: support backward jumpJiong Wang
This patch adds support for backward jump on NFP. - restrictions on backward jump in various functions have been removed. - nfp_fixup_branches now supports backward jump. There is one thing to note, currently an input eBPF JMP insn may generate several NFP insns, for example, NFP imm move insn A \ NFP compare insn B --> 3 NFP insn jited from eBPF JMP insn M NFP branch insn C / --- NFP insn X --> 1 NFP insn jited from eBPF insn N --- ... therefore, we are doing sanity check to make sure the last jited insn from an eBPF JMP is a NFP branch instruction. Once backward jump is allowed, it is possible an eBPF JMP insn is at the end of the program. This is however causing trouble for the sanity check. Because the sanity check requires the end index of the NFP insns jited from one eBPF insn while only the start index is recorded before this patch that we can only get the end index by: start_index_of_the_next_eBPF_insn - 1 or for the above example: start_index_of_eBPF_insn_N (which is the index of NFP insn X) - 1 nfp_fixup_branches was using nfp_for_each_insn_walk2 to expose *next* insn to each iteration during the traversal so the last index could be calculated from which. Now, it needs some extra code to handle the last insn. Meanwhile, the use of walk2 is actually unnecessary, we could simply use generic single instruction walk to do this, the next insn could be easily calculated using list_next_entry. So, this patch migrates the jump fixup traversal method to *list_for_each_entry*, this simplifies the code logic a little bit. The other thing to note is a new state variable "last_bpf_off" is introduced to track the index of the last jited NFP insn. This is necessary because NFP is generating special purposes epilogue sequences, so the index of the last jited NFP insn is *not* always nfp_prog->prog_len - 1. Suggested-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Jiong Wang <jiong.wang@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01nfp: fix old kdoc issuesJakub Kicinski
Since commit 3a025e1d1c2e ("Add optional check for bad kernel-doc comments") when built with W=1 build will complain about kdoc errors. Fix the kdoc issues we have. kdoc is still confused by defines in nfp_net_ctrl.h but those are not really errors. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01md/r5cache: move mddev_lock() out of r5c_journal_mode_set()Song Liu
r5c_journal_mode_set() is called by r5c_journal_mode_store() and raid_ctr() in dm-raid. We don't need mddev_lock() when calling from raid_ctr(). This patch fixes this by moves the mddev_lock() to r5c_journal_mode_store(). Cc: stable@vger.kernel.org (v4.13+) Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-12-01md/raid5: correct degraded calculation in raid5_errorbingjingc
When disk failure occurs on new disks for reshape, mddev->degraded is not calculated correctly. Faulty bit of the failure device is not set before raid5_calc_degraded(conf). mdadm --create /dev/md0 --level=5 --raid-devices=3 /dev/loop[012] mdadm /dev/md0 -a /dev/loop3 mdadm /dev/md0 --grow -n4 mdadm /dev/md0 -f /dev/loop3 # simulating disk failure cat /sys/block/md0/md/degraded # it outputs 0, but it should be 1. However, mdadm -D /dev/md0 will show that it is degraded. It's a bug. It can be fixed by moving the resources raid5_calc_degraded() depends on before it. Reported-by: Roy Chung <roychung@synology.com> Reviewed-by: Alex Wu <alexwu@synology.com> Signed-off-by: BingJing Chang <bingjingc@synology.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-12-01IB/core: Only enforce security for InfiniBandDaniel Jurgens
For now the only LSM security enforcement mechanism available is specific to InfiniBand. Bypass enforcement for non-IB link types. This fixes a regression where modify_qp fails for iWARP because querying the PKEY returns -EINVAL. Cc: Paul Moore <paul@paul-moore.com> Cc: Don Dutile <ddutile@redhat.com> Cc: stable@vger.kernel.org Reported-by: Potnuri Bharat Teja <bharat@chelsio.com> Fixes: d291f1a65232("IB/core: Enforce PKey security on QPs") Fixes: 47a2b338fe63("IB/core: Enforce security on management datagrams") Signed-off-by: Daniel Jurgens <danielj@mellanox.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Tested-by: Potnuri Bharat Teja <bharat@chelsio.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2017-12-01RDMA/hns: Get rid of page operation after dma_alloc_coherentWei Hu\(Xavier\)
In general, dma_alloc_coherent() returns a CPU virtual address and a DMA address, and we have no guarantee that the underlying memory even has an associated struct page at all. This patch gets rid of the page operation after dma_alloc_coherent, and records the VA returned form dma_alloc_coherent in the struct of hem in hns RoCE driver. Fixes: 9a44353("IB/hns: Add driver files for hns RoCE driver") Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com> Signed-off-by: Shaobo Xu <xushaobo2@huawei.com> Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Yixian Liu <liuyixian@huawei.com> Signed-off-by: Xiping Zhang (Francis) <zhangxiping3@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2017-12-01RDMA/hns: Get rid of virt_to_page and vmap calls after dma_alloc_coherentWei Hu\(Xavier\)
In general dma_alloc_coherent() returns a CPU virtual address and a DMA address, and we have no guarantee that the virtual address is either in the linear map or vmalloc. It could be in some other special place. We have no guarantee that the underlying memory even has an associated struct page at all. In current code, there are incorrect usage as below: dma_alloc_coherent + virt_to_page + vmap. There will probably introduce coherency problem. This patch fixes it to get rid of virt_to_page and vmap calls at Leon's suggestion. The related link: https://lkml.org/lkml/2017/11/7/34 Fixes: 9a44353("IB/hns: Add driver files for hns RoCE driver") Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com> Signed-off-by: Shaobo Xu <xushaobo2@huawei.com> Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Yixian Liu <liuyixian@huawei.com> Signed-off-by: Xiping Zhang (Francis) <zhangxiping3@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2017-12-01RDMA/hns: Fix the issue of IOVA not page continuous in hip08Wei Hu\(Xavier\)
If the smmu is enabled, the length of sg obtained from __iommu_map_sg_attrs is not 4kB. When the IOVA is set with the sg dma address, the IOVA will not be page continuous. so, the current code has MTPT configuration error that probably cause dma operation failure. In order to fix this issue, the IOVA should be calculated based on the sg length. Fixes: 3958cc5("RDMA/hns: Configure the MTPT in hip08") Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com> Signed-off-by: Shaobo Xu <xushaobo2@huawei.com> Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Yixian Liu <liuyixian@huawei.com> Signed-off-by: Xiping Zhang (Francis) <zhangxiping3@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2017-12-01IB/core: Init subsys if compiled to vmlinuz-coreDmitry Monakhov
Once infiniband is compiled as a core component its subsystem must be enabled before device initialization. Otherwise there is a NULL pointer dereference during mlx4_core init, calltrace: ->device_add if (dev->class) { deref dev->class->p =>NULLPTR #Config CONFIG_NET_DEVLINK=y CONFIG_MAY_USE_DEVLINK=y CONFIG_MLX4_EN=y Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2017-12-01RDMA/cma: Make sure that PSN is not over max allowedMoni Shoua
This patch limits the initial value for PSN to 24 bits as spec requires. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Mukesh Kacker <mukesh.kacker@oracle.com> Signed-off-by: Daniel Jurgens <danielj@mellanox.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2017-12-01i40iw: Notify user of established connection after QP in RTSHenry Orosco
Established CM event is sent prior to modifying QP to RTS state. This can result in application closing the connection before the QP is actually in RTS state. Move sending of established CM event to after modify QP to RTS. Fixes: f27b4746f378 ("i40iw: add connection management code") Signed-off-by: Henry Orosco <henry.orosco@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2017-12-01i40iw: Move MPA request event for loopback after connectTatyana Nikolova
For loopback, a MPA request event is generated when cm_node is initialized, which allows applications to act on the connect request before i40iw_connect() has completed. In some cases, the reject flow executes in parallel with the connect flow and doesn't delete an APBVT entry, because the apbvt_set variable is still not set by the connect flow. Move the MPA request event to the end of i40iw_connect() to notify application for a connect request, after connect has completed. Fixes: f27b4746f378 ("i40iw: add connection management code") Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com> Signed-off-by: Henry Orosco <henry.orosco@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2017-12-01i40iw: Correct ARP index maskMustafa Ismail
The ARP table entry indexes are aliased to 12bits instead of the intended 16bits when uploaded to the QP Context. This will present an issue when the number of connections exceeds 4096 as ARP entries are reused. Fix this by adjusting the mask to account for the full 16bits. Fixes: 4e9042e647ff ("i40iw: add hw and utils files") Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2017-12-01i40iw: Do not free sqbuf when event is I40IW_TIMER_TYPE_CLOSEMustafa Ismail
When the event type is I40IW_TIMER_TYPE_CLOSE, there is no sqbuf and it should not be freed as one in i40iw_schedule_cm_timer(). Fixes: f27b4746f378 ("i40iw: add connection management code") Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2017-12-01i40iw: Allocate a sdbuf per CQP WQEChien Tin Tung
Currently there is only one sdbuf per Control QP (CQP) for programming Segment Descriptor (SD). If multiple SD work requests are posted simultaneously, the sdbuf is reused by all WQEs and new WQEs can corrupt previous WQEs sdbuf leading to incorrect SD programming. Fix this by allocating one sdbuf per CQP SQ WQE. When an SD command is posted, it will use the corresponding sdbuf for the WQE. Fixes: 86dbcd0f12e9 ("i40iw: add file to handle cqp calls") Signed-off-by: Chien Tin Tung <chien.tin.tung@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2017-12-01usb: xhci: fix panic in xhci_free_virt_devices_depth_firstYu Chen
Check vdev->real_port 0 to avoid panic [ 9.261347] [<ffffff800884a390>] xhci_free_virt_devices_depth_first+0x58/0x108 [ 9.261352] [<ffffff800884a814>] xhci_mem_cleanup+0x1bc/0x570 [ 9.261355] [<ffffff8008842de8>] xhci_stop+0x140/0x1c8 [ 9.261365] [<ffffff80087ed304>] usb_remove_hcd+0xfc/0x1d0 [ 9.261369] [<ffffff80088551c4>] xhci_plat_remove+0x6c/0xa8 [ 9.261377] [<ffffff80086e928c>] platform_drv_remove+0x2c/0x70 [ 9.261384] [<ffffff80086e6ea0>] __device_release_driver+0x80/0x108 [ 9.261387] [<ffffff80086e7a1c>] device_release_driver+0x2c/0x40 [ 9.261392] [<ffffff80086e5f28>] bus_remove_device+0xe0/0x120 [ 9.261396] [<ffffff80086e2e34>] device_del+0x114/0x210 [ 9.261399] [<ffffff80086e9e00>] platform_device_del+0x30/0xa0 [ 9.261403] [<ffffff8008810bdc>] dwc3_otg_work+0x204/0x488 [ 9.261407] [<ffffff80088133fc>] event_work+0x304/0x5b8 [ 9.261414] [<ffffff80080e31b0>] process_one_work+0x148/0x490 [ 9.261417] [<ffffff80080e3548>] worker_thread+0x50/0x4a0 [ 9.261421] [<ffffff80080e9ea0>] kthread+0xe8/0x100 [ 9.261427] [<ffffff8008083680>] ret_from_fork+0x10/0x50 The problem can occur if xhci_plat_remove() is called shortly after xhci_plat_probe(). While xhci_free_virt_devices_depth_first been called before the device has been setup and get real_port initialized. The problem occurred on Hikey960 and was reproduced by Guenter Roeck on Kevin with chromeos-4.4. Fixes: ee8665e28e8d ("xhci: free xhci virtual devices with leaf nodes first") Cc: Guenter Roeck <groeck@google.com> Cc: <stable@vger.kernel.org> # v4.10+ Reviewed-by: Guenter Roeck <groeck@chromium.org> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Fan Ning <fanning4@hisilicon.com> Signed-off-by: Li Rui <lirui39@hisilicon.com> Signed-off-by: yangdi <yangdi10@hisilicon.com> Signed-off-by: Yu Chen <chenyu56@huawei.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-01xhci: Don't show incorrect WARN message about events for empty ringsMathias Nyman
xHC can generate two events for a short transfer if the short TRB and last TRB in the TD are not the same TRB. The driver will handle the TD after the first short event, and remove it from its internal list. Driver then incorrectly prints a warning for the second event: "WARN Event TRB for slot x ep y with no TDs queued" Fix this by not printing a warning if we get a event on a empty list if the previous event was a short event. Cc: <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-01virtio_balloon: fix increment of vb->num_pfns in fill_balloon()Jan Stancek
commit c7cdff0e8647 ("virtio_balloon: fix deadlock on OOM") changed code to increment vb->num_pfns before call to set_page_pfns(), which used to happen only after. This patch fixes boot hang for me on ppc64le KVM guests. Fixes: c7cdff0e8647 ("virtio_balloon: fix deadlock on OOM") Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Michal Hocko <mhocko@suse.com> Cc: Wei Wang <wei.w.wang@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Jan Stancek <jstancek@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-12-01virtio: release virtio index when fail to device_registerweiping zhang
index can be reused by other virtio device. Cc: stable@vger.kernel.org Signed-off-by: weiping zhang <zhangweiping@didichuxing.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-12-01fw_cfg: fix driver removeMarc-André Lureau
On driver remove(), all objects created during probe() should be removed, but sysfs qemu_fw_cfg/rev file was left. Also reorder functions to match probe() error cleanup code. Cc: stable@vger.kernel.org Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-12-01Merge tag 'powerpc-4.15-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "Two fixes for nasty kexec/kdump crashes in certain configurations. A couple of minor fixes for the new TIDR code. A fix for an oops in a CXL error handling path. Thanks to: Andrew Donnellan, Christophe Lombard, David Gibson, Mahesh Salgaonkar, Vaibhav Jain" * tag 'powerpc-4.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc: Do not assign thread.tidr if already assigned powerpc: Avoid signed to unsigned conversion in set_thread_tidr() powerpc/kexec: Fix kexec/kdump in P9 guest kernels powerpc/powernv: Fix kexec crashes caused by tlbie tracing cxl: Check if vphb exists before iterating over AFU devices
2017-12-01Merge tag 'afs-fixes-20171201' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull AFS fixes from David Howells: "Two fix patches for the AFS filesystem: - Fix the refcounting on permit caching. - AFS inode (afs_vnode) fields need resetting after allocation because they're only initialised when slab pages are obtained from the page allocator" * tag 'afs-fixes-20171201' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: afs: Properly reset afs_vnode (inode) fields afs: Fix permit refcounting
2017-12-01Merge tag 'mmc-v4.15-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "MMC core: - Ensure that debugfs files are removed properly - Fix missing blk_put_request() - Deal with errors from blk_get_request() - Rewind mmc bus suspend operations at failures - Prepend '0x' to ocr and pre_eol_info in sysfs to identify as hex MMC host: - sdhci-msm: Make it optional to wait for signal level changes - sdhci: Avoid swiotlb buffer being full" * tag 'mmc-v4.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: core: prepend 0x to OCR entry in sysfs mmc: core: prepend 0x to pre_eol_info entry in sysfs mmc: sdhci: Avoid swiotlb buffer being full mmc: sdhci-msm: Optionally wait for signal level changes mmc: block: Ensure that debugfs files are removed mmc: core: Do not leave the block driver in a suspended state mmc: block: Check return value of blk_get_request() mmc: block: Fix missing blk_put_request()
2017-12-01Merge tag 'drm-fixes-for-v4.15-rc2' of ↵Linus Torvalds
git://people.freedesktop.org/~airlied/linux Pull drm fixes and cleanups from Dave Airlie: "The main thing are a bunch of fixes for the new amd display code, a bunch of smatch fixes. core: - Atomic helper regression fix. - Deferred fbdev fallout regression fix. amdgpu: - New display code (dc) dpms, suspend/resume and smatch fixes, along with some others - Some regression fixes for amdkfd/radeon. - Fix a ttm regression for swiotlb disabled bridge: - A bunch of fixes for the tc358767 bridge mali-dp + hdlcd: - some fixes and internal API catchups. imx-drm: -regression fix in atomic code. omapdrm: - platform detection regression fixes" * tag 'drm-fixes-for-v4.15-rc2' of git://people.freedesktop.org/~airlied/linux: (76 commits) drm/imx: always call wait_for_flip_done in commit_tail omapdrm: hdmi4_cec: signedness bug in hdmi4_cec_init() drm: omapdrm: Fix DPI on platforms using the DSI VDDS omapdrm: hdmi4: Correct the SoC revision matching drm/omap: displays: panel-dpi: add backlight dependency drm/omap: Fix error handling path in 'omap_dmm_probe()' drm/i915: Disable THP until we have a GPU read BW W/A drm/bridge: tc358767: fix 1-lane behavior drm/bridge: tc358767: fix AUXDATAn registers access drm/bridge: tc358767: fix timing calculations drm/bridge: tc358767: fix DP0_MISC register set drm/bridge: tc358767: filter out too high modes drm/bridge: tc358767: do no fail on hi-res displays drm/bridge: Fix lvds-encoder since the panel_bridge rework. drm/bridge: synopsys/dw-hdmi: Enable cec clock drm/bridge: adv7511/33: Fix adv7511_cec_init() failure handling drm/radeon: remove init of CIK VMIDs 8-16 for amdkfd drm/ttm: fix populate_and_map() functions once more drm/fb_helper: Disable all crtc's when initial setup fails. drm/atomic: make drm_atomic_helper_wait_for_vblanks more agressive ...
2017-12-01Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "A selection of fixes/changes that should make it into this series. This contains: - NVMe, two merges, containing: - pci-e, rdma, and fc fixes - Device quirks - Fix for a badblocks leak in null_blk - bcache fix from Rui Hua for a race condition regression where -EINTR was returned to upper layers that didn't expect it. - Regression fix for blktrace for a bug introduced in this series. - blktrace cleanup for cgroup id. - bdi registration error handling. - Small series with cleanups for blk-wbt. - Various little fixes for typos and the like. Nothing earth shattering, most important are the NVMe and bcache fixes" * 'for-linus' of git://git.kernel.dk/linux-block: (34 commits) nvme-pci: fix NULL pointer dereference in nvme_free_host_mem() nvme-rdma: fix memory leak during queue allocation blktrace: fix trace mutex deadlock nvme-rdma: Use mr pool nvme-rdma: Check remotely invalidated rkey matches our expected rkey nvme-rdma: wait for local invalidation before completing a request nvme-rdma: don't complete requests before a send work request has completed nvme-rdma: don't suppress send completions bcache: check return value of register_shrinker bcache: recover data from backing when data is clean bcache: Fix building error on MIPS bcache: add a comment in journal bucket reading nvme-fc: don't use bit masks for set/test_bit() numbers blk-wbt: fix comments typo blk-wbt: move wbt_clear_stat to common place in wbt_done blk-sysfs: remove NULL pointer checking in queue_wb_lat_store blk-wbt: remove duplicated setting in wbt_init nvme-pci: add quirk for delay before CHK RDY for WDC SN200 block: remove useless assignment in bio_split null_blk: fix dev->badblocks leak ...
2017-12-01arm64: context: Fix comments and remove pointless smp_wmb()Will Deacon
The comments in the ASID allocator incorrectly hint at an MP-style idiom using the asid_generation and the active_asids array. In fact, the synchronisation is achieved using a combination of an xchg operation and a spinlock, so update the comments and remove the pointless smp_wmb(). Cc: James Morse <james.morse@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-12-01arm64: cpu_ops: Add missing 'const' qualifiersYury Norov
Building the kernel with an LTO-enabled GCC spits out the following "const" warning for the cpu_ops code: mm/percpu.c:2168:20: error: pcpu_fc_names causes a section type conflict with dt_supported_cpu_ops const char * const pcpu_fc_names[PCPU_FC_NR] __initconst = { ^ arch/arm64/kernel/cpu_ops.c:34:37: note: ‘dt_supported_cpu_ops’ was declared here static const struct cpu_operations *dt_supported_cpu_ops[] __initconst = { Fix it by adding missed const qualifiers. Signed-off-by: Yury Norov <ynorov@caviumnetworks.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-12-01arm64: perf: remove unsupported events for Cortex-A73Xu YiPing
bus access read/write events are not supported in A73, based on the Cortex-A73 TRM r0p2, section 11.9 Events (pages 11-457 to 11-460). Fixes: 5561b6c5e981 "arm64: perf: add support for Cortex-A73" Acked-by: Julien Thierry <julien.thierry@arm.com> Signed-off-by: Xu YiPing <xuyiping@hisilicon.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-12-01arm64: fpsimd: Fix failure to restore FPSIMD state after signalsDave Martin
The fpsimd_update_current_state() function is responsible for loading the FPSIMD state from the user signal frame into the current task during sigreturn. When implementing support for SVE, conditional code was added to this function in order to handle the case where SVE state need to be loaded for the task and merged with the FPSIMD data from the signal frame; however, the FPSIMD-only case was unintentionally dropped. As a result of this, sigreturn does not currently restore the FPSIMD state of the task, except in the case where the system supports SVE and the signal frame contains SVE state in addition to FPSIMD state. This patch fixes this bug by making the copy-in of the FPSIMD data from the signal frame to thread_struct unconditional. This remains a performance regression from v4.14, since the FPSIMD state is now copied into thread_struct and then loaded back, instead of _only_ being loaded into the CPU FPSIMD registers. However, it is essential to call task_fpsimd_load() here anyway in order to ensure that the SVE enable bit in CPACR_EL1 is set correctly before returning to userspace. This could use some refactoring, but since sigreturn is not a fast path I have kept this patch as a pure fix and left the refactoring for later. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Fixes: 8cd969d28fd2 ("arm64/sve: Signal handling support") Reported-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Dave Martin <Dave.Martin@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-12-01arm64: pgd: Mark pgd_cache as __ro_after_initJinbum Park
pgd_cache is setup once while init stage and never changed after that, so it is good candidate for __ro_after_init Signed-off-by: Jinbum Park <jinb.park7@gmail.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-12-01arm64: ftrace: emit ftrace-mod.o contents through codeArd Biesheuvel
When building the arm64 kernel with both CONFIG_ARM64_MODULE_PLTS and CONFIG_DYNAMIC_FTRACE enabled, the ftrace-mod.o object file is built with the kernel and contains a trampoline that is linked into each module, so that modules can be loaded far away from the kernel and still reach the ftrace entry point in the core kernel with an ordinary relative branch, as is emitted by the compiler instrumentation code dynamic ftrace relies on. In order to be able to build out of tree modules, this object file needs to be included into the linux-headers or linux-devel packages, which is undesirable, as it makes arm64 a special case (although a precedent does exist for 32-bit PPC). Given that the trampoline essentially consists of a PLT entry, let's not bother with a source or object file for it, and simply patch it in whenever the trampoline is being populated, using the existing PLT support routines. Cc: <stable@vger.kernel.org> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
generated by cgit (git 2.34.1) at 2025-09-14 12:02:33 +0000