| Age | Commit message (Collapse) | Author |
|---|
|
Sealevel XR17V35X based devices are inoperable on kernel versions
4.11 and above due to a change in the GPIO preconfiguration introduced in
commit
7dea8165f1d. This patch fixes this by preconfiguring the GPIO on Sealevel
cards to the value (0x00) used prior to commit 7dea8165f1d
With GPIOs preconfigured as per commit 7dea8165f1d all ports on
Sealevel XR17V35X based devices become stuck in high impedance
mode, regardless of dip-switch or software configuration. This
causes the device to become effectively unusable. This patch (in
various forms) has been distributed to our customers and no issues
related to it have been reported.
Fixes: 7dea8165f1d6 ("serial: exar: Preconfigure xr17v35x MPIOs as output")
Signed-off-by: Matthew Howell <matthew.howell@sealevel.com>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2007221605270.13247@tstest-VirtualBox
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
The following patchset contains Netfilter/IPVS fixes for net:
1) Fix NAT hook deletion when table is dormant, from Florian Westphal.
2) Fix IPVS sync stalls, from guodeqing.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
geneve_nl2info() sets 'df' conditionally, so we have to
initialize it by copying the value from existing geneve
device in geneve_changelink().
Fixes: 56c09de347e4 ("geneve: allow changing DF behavior after creation")
Reported-by: syzbot+7ebc2e088af5e4c0c9fa@syzkaller.appspotmail.com
Cc: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Very similar to commit 544f287b8495
("bonding: check error value of register_netdevice() immediately"),
we should immediately check the return value of register_netdevice()
before doing anything else.
Fixes: 005db31d5f5f ("bonding: set carrier off for devices created through netlink")
Reported-and-tested-by: syzbot+bbc3a11c4da63c1b74d6@syzkaller.appspotmail.com
Cc: Beniamino Galvani <bgalvani@redhat.com>
Cc: Taehee Yoo <ap420073@gmail.com>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This reverts commit 9ffad9263b467efd8f8dc7ae1941a0a655a2bab2.
Upon additional testing with older servers, it was found that
the original commit introduced a regression when using the old SMB1
dialect and rsyncing over an existing file.
The patch will need to be respun to address this, likely including
a larger refactoring of the SMB1 and SMB3 rename code paths to make
it less confusing and also to address some additional rename error
cases that SMB3 may be able to workaround.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reported-by: Patrick Fernie <patrick.fernie@gmail.com>
CC: Stable <stable@vger.kernel.org>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
Acked-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux into master
Pull s390 fixes from Heiko Carstens:
- Change cpum_cf/perf counter name from DFLT_CCERROR to DFLT_CCFINISH
to reflect reality and avoid further confusion. This is a user space
visible change therefore the commit has also a stable tag for 5.7,
where this counter was introduced.
- Add Matthew Rosato as s390 IOMMU maintainer.
* tag 's390-5.8-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
MAINTAINERS: add Matthew for s390 IOMMU
s390/cpum_cf,perf: change DFLT_CCERROR counter name
|
|
When I have KASAN enabled on my kernel and I start stressing the
touchscreen my system tends to hang. The touchscreen is one of the
only things that does a lot of big i2c transfers and ends up hitting
the DMA paths in the geni i2c driver. It appears that KASAN adds
enough delay in my system to tickle a race condition in the DMA setup
code.
When the system hangs, I found that it was running the geni_i2c_irq()
over and over again. It had these:
m_stat = 0x04000080
rx_st = 0x30000011
dm_tx_st = 0x00000000
dm_rx_st = 0x00000000
dma = 0x00000001
Notably we're in DMA mode but are getting M_RX_IRQ_EN and
M_RX_FIFO_WATERMARK_EN over and over again.
Putting some traces in geni_i2c_rx_one_msg() showed that when we
failed we were getting to the start of geni_i2c_rx_one_msg() but were
never executing geni_se_rx_dma_prep().
I believe that the problem here is that we are starting the geni
command before we run geni_se_rx_dma_prep(). If a transfer makes it
far enough before we do that then we get into the state I have
observed. Let's change the order, which seems to work fine.
Although problems were seen on the RX path, code inspection suggests
that the TX should be changed too. Change it as well.
Fixes: 37692de5d523 ("i2c: i2c-qcom-geni: Add bus driver for the Qualcomm GENI I2C controller")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Reviewed-by: Akash Asthana <akashast@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Mukesh Kumar Savaliya <msavaliy@codeaurora.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
On R-Car Gen2, we get a timeout when reading from the address set in
ICSAR, even though the slave interface is disabled. Clearing it fixes
this situation. Note that Gen3 is not affected.
To reproduce: bind and undbind an I2C slave on some bus, run
'i2cdetect' on that bus.
Fixes: de20d1857dd6 ("i2c: rcar: add slave support")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Previously TLP may send multiple probes of new data in one
flight. This happens when the sender is cwnd limited. After the
initial TLP containing new data is sent, the sender receives another
ACK that acks partial inflight. It may re-arm another TLP timer
to send more, if no further ACK returns before the next TLP timeout
(PTO) expires. The sender may send in theory a large amount of TLP
until send queue is depleted. This only happens if the sender sees
such irregular uncommon ACK pattern. But it is generally undesirable
behavior during congestion especially.
The original TLP design restrict only one TLP probe per inflight as
published in "Reducing Web Latency: the Virtue of Gentle Aggression",
SIGCOMM 2013. This patch changes TLP to send at most one probe
per inflight.
Note that if the sender is app-limited, TLP retransmits old data
and did not have this issue.
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We recently added some bounds checking in ax25_connect() and
ax25_sendmsg() and we so we removed the AX25_MAX_DIGIS checks because
they were no longer required.
Unfortunately, I believe they are required to prevent integer overflows
so I have added them back.
Fixes: 8885bb0621f0 ("AX.25: Prevent out-of-bounds read in ax25_sendmsg()")
Fixes: 2f2a7ffad5c6 ("AX.25: Fix out-of-bounds read in ax25_connect()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Morimoto <kuninori.morimoto.gx@renesas.com>:
Hi Mark
Many ASoC drivers are getting rtd from substream by
rtd = substream->private_data
OTOH, we have snd_pcm_substream_chip() macro for it.
#define snd_pcm_substream_chip(substream) ((substream)->private_data)
But, both are not understandable for reader.
This patch adds new asoc_substream_to_rtd() which is easy to understand.
These are not important, but for readable code.
Kuninori Morimoto (29):
ASoC: soc-xxx: add asoc_substream_to_rtd()
ASoC: ux500: use asoc_substream_to_rtd()
ASoC: ti: use asoc_substream_to_rtd()
ASoC: tegra: use asoc_substream_to_rtd()
ASoC: sunxi: use asoc_substream_to_rtd()
ASoC: stm: use asoc_substream_to_rtd()
ASoC: sof: use asoc_substream_to_rtd()
ASoC: sh: use asoc_substream_to_rtd()
ASoC: samsung: use asoc_substream_to_rtd()
ASoC: pxa: use asoc_substream_to_rtd()
ASoC: cirrus: use asoc_substream_to_rtd()
ASoC: rockchip: use asoc_substream_to_rtd()
ASoC: amd: use asoc_substream_to_rtd()
ASoC: fsl: use asoc_substream_to_rtd()
ASoC: mediatek: use asoc_substream_to_rtd()
ASoC: atmel: use asoc_substream_to_rtd()
ASoC: qcom: use asoc_substream_to_rtd()
ASoC: dwc: use asoc_substream_to_rtd()
ASoC: intel: use asoc_substream_to_rtd()
ASoC: meson: use asoc_substream_to_rtd()
ASoC: au1x: use asoc_substream_to_rtd()
ASoC: bcm: use asoc_substream_to_rtd()
ASoC: codecs: use asoc_substream_to_rtd()
ASoC: generic: use asoc_substream_to_rtd()
ASoC: sprd: use asoc_substream_to_rtd()
ASoC: kirkwood: use asoc_substream_to_rtd()
ASoC: xtensa: use asoc_substream_to_rtd()
ASoC: mxs: use asoc_substream_to_rtd()
ASoC: uniphier: use asoc_substream_to_rtd()
include/sound/soc.h | 2 +
sound/soc/amd/acp-da7219-max98357a.c | 12 ++--
sound/soc/amd/acp-pcm-dma.c | 2 +-
sound/soc/amd/acp-rt5645.c | 2 +-
sound/soc/amd/acp3x-rt5682-max9836.c | 8 +--
sound/soc/amd/raven/acp3x-i2s.c | 2 +-
sound/soc/amd/raven/acp3x-pcm-dma.c | 6 +-
sound/soc/atmel/atmel-classd.c | 8 +--
sound/soc/atmel/atmel-pcm-dma.c | 4 +-
sound/soc/atmel/atmel-pcm-pdc.c | 2 +-
sound/soc/atmel/atmel-pdmic.c | 10 +--
sound/soc/atmel/atmel_wm8904.c | 2 +-
sound/soc/au1x/db1200.c | 2 +-
sound/soc/au1x/dbdma2.c | 2 +-
sound/soc/au1x/dma.c | 2 +-
sound/soc/bcm/bcm63xx-pcm-whistler.c | 12 ++--
sound/soc/bcm/cygnus-pcm.c | 16 ++---
sound/soc/cirrus/edb93xx.c | 2 +-
sound/soc/cirrus/snappercl15.c | 2 +-
sound/soc/codecs/rt5677-spi.c | 4 +-
sound/soc/dwc/dwc-pcm.c | 2 +-
sound/soc/fsl/eukrea-tlv320.c | 2 +-
sound/soc/fsl/fsl-asoc-card.c | 2 +-
sound/soc/fsl/fsl_asrc_dma.c | 4 +-
sound/soc/fsl/fsl_dma.c | 2 +-
sound/soc/fsl/fsl_spdif.c | 10 +--
sound/soc/fsl/fsl_ssi.c | 8 +--
sound/soc/fsl/imx-audmix.c | 6 +-
sound/soc/fsl/imx-mc13783.c | 2 +-
sound/soc/fsl/mpc5200_dma.c | 8 +--
sound/soc/fsl/mpc5200_psc_i2s.c | 2 +-
sound/soc/fsl/mpc8610_hpcd.c | 2 +-
sound/soc/fsl/mx27vis-aic32x4.c | 2 +-
sound/soc/fsl/p1022_ds.c | 2 +-
sound/soc/fsl/p1022_rdk.c | 2 +-
sound/soc/fsl/wm1133-ev1.c | 2 +-
sound/soc/generic/simple-card-utils.c | 6 +-
sound/soc/intel/atom/sst-mfld-platform-pcm.c | 6 +-
sound/soc/intel/baytrail/sst-baytrail-pcm.c | 16 ++---
sound/soc/intel/boards/bdw-rt5650.c | 2 +-
sound/soc/intel/boards/bdw-rt5677.c | 4 +-
sound/soc/intel/boards/broadwell.c | 2 +-
sound/soc/intel/boards/bxt_rt298.c | 2 +-
sound/soc/intel/boards/byt-rt5640.c | 2 +-
sound/soc/intel/boards/bytcht_da7213.c | 4 +-
sound/soc/intel/boards/bytcr_rt5640.c | 2 +-
sound/soc/intel/boards/bytcr_rt5651.c | 2 +-
sound/soc/intel/boards/cht_bsw_max98090_ti.c | 2 +-
sound/soc/intel/boards/cht_bsw_nau8824.c | 2 +-
sound/soc/intel/boards/cht_bsw_rt5645.c | 2 +-
sound/soc/intel/boards/cht_bsw_rt5672.c | 2 +-
sound/soc/intel/boards/cml_rt1011_rt5682.c | 4 +-
sound/soc/intel/boards/ehl_rt5660.c | 2 +-
sound/soc/intel/boards/glk_rt5682_max98357a.c | 2 +-
sound/soc/intel/boards/haswell.c | 2 +-
sound/soc/intel/boards/kbl_da7219_max98927.c | 8 +--
sound/soc/intel/boards/kbl_rt5660.c | 2 +-
sound/soc/intel/boards/kbl_rt5663_max98927.c | 4 +-
.../intel/boards/kbl_rt5663_rt5514_max98927.c | 4 +-
.../soc/intel/boards/skl_nau88l25_max98357a.c | 2 +-
sound/soc/intel/boards/skl_nau88l25_ssm4567.c | 2 +-
sound/soc/intel/boards/skl_rt286.c | 2 +-
sound/soc/intel/boards/sof_da7219_max98373.c | 2 +-
sound/soc/intel/boards/sof_maxim_common.c | 4 +-
sound/soc/intel/boards/sof_pcm512x.c | 4 +-
sound/soc/intel/boards/sof_rt5682.c | 4 +-
sound/soc/intel/boards/sof_sdw_rt1308.c | 2 +-
sound/soc/intel/boards/sof_wm8804.c | 2 +-
sound/soc/intel/haswell/sst-haswell-pcm.c | 12 ++--
sound/soc/intel/keembay/kmb_platform.c | 2 +-
sound/soc/intel/skylake/skl-pcm.c | 8 +--
sound/soc/kirkwood/armada-370-db.c | 2 +-
sound/soc/mediatek/common/mtk-afe-fe-dai.c | 12 ++--
.../mediatek/common/mtk-afe-platform-driver.c | 2 +-
sound/soc/mediatek/mt2701/mt2701-afe-pcm.c | 2 +-
sound/soc/mediatek/mt2701/mt2701-cs42448.c | 2 +-
sound/soc/mediatek/mt2701/mt2701-wm8960.c | 2 +-
sound/soc/mediatek/mt6797/mt6797-afe-pcm.c | 4 +-
sound/soc/mediatek/mt8173/mt8173-afe-pcm.c | 2 +-
sound/soc/mediatek/mt8173/mt8173-max98090.c | 2 +-
.../mediatek/mt8173/mt8173-rt5650-rt5514.c | 2 +-
.../mediatek/mt8173/mt8173-rt5650-rt5676.c | 2 +-
sound/soc/mediatek/mt8173/mt8173-rt5650.c | 2 +-
sound/soc/mediatek/mt8183/mt8183-afe-pcm.c | 4 +-
.../mediatek/mt8183/mt8183-da7219-max98357.c | 8 +--
.../mt8183/mt8183-mt6358-ts3a227-max98357.c | 12 ++--
sound/soc/meson/axg-card.c | 2 +-
sound/soc/meson/gx-card.c | 2 +-
sound/soc/meson/meson-card-utils.c | 2 +-
sound/soc/meson/meson-codec-glue.c | 2 +-
sound/soc/mxs/mxs-sgtl5000.c | 2 +-
sound/soc/pxa/brownstone.c | 2 +-
sound/soc/pxa/corgi.c | 4 +-
sound/soc/pxa/hx4700.c | 2 +-
sound/soc/pxa/imote2.c | 2 +-
sound/soc/pxa/magician.c | 6 +-
sound/soc/pxa/mmp-pcm.c | 2 +-
sound/soc/pxa/poodle.c | 4 +-
sound/soc/pxa/pxa2xx-i2s.c | 2 +-
sound/soc/pxa/spitz.c | 4 +-
sound/soc/pxa/tosa.c | 2 +-
sound/soc/pxa/z2.c | 2 +-
sound/soc/pxa/zylonite.c | 2 +-
sound/soc/qcom/apq8096.c | 2 +-
sound/soc/qcom/lpass-platform.c | 14 ++---
sound/soc/qcom/qdsp6/q6asm-dai.c | 6 +-
sound/soc/qcom/qdsp6/q6routing.c | 2 +-
sound/soc/qcom/sdm845.c | 14 ++---
sound/soc/qcom/storm.c | 2 +-
sound/soc/rockchip/rk3288_hdmi_analog.c | 2 +-
sound/soc/rockchip/rk3399_gru_sound.c | 8 +--
sound/soc/rockchip/rockchip_i2s.c | 2 +-
sound/soc/rockchip/rockchip_max98090.c | 2 +-
sound/soc/rockchip/rockchip_rt5645.c | 2 +-
sound/soc/samsung/aries_wm8994.c | 4 +-
sound/soc/samsung/arndale.c | 4 +-
sound/soc/samsung/h1940_uda1380.c | 2 +-
sound/soc/samsung/i2s.c | 2 +-
sound/soc/samsung/jive_wm8750.c | 2 +-
sound/soc/samsung/littlemill.c | 2 +-
sound/soc/samsung/neo1973_wm8753.c | 8 +--
sound/soc/samsung/odroid.c | 6 +-
sound/soc/samsung/pcm.c | 4 +-
sound/soc/samsung/rx1950_uda1380.c | 2 +-
sound/soc/samsung/s3c-i2s-v2.c | 2 +-
sound/soc/samsung/s3c24xx_simtec.c | 2 +-
sound/soc/samsung/s3c24xx_uda134x.c | 6 +-
sound/soc/samsung/smartq_wm8987.c | 2 +-
sound/soc/samsung/smdk_spdif.c | 2 +-
sound/soc/samsung/smdk_wm8580.c | 2 +-
sound/soc/samsung/smdk_wm8994.c | 2 +-
sound/soc/samsung/smdk_wm8994pcm.c | 2 +-
sound/soc/samsung/snow.c | 2 +-
sound/soc/samsung/spdif.c | 6 +-
sound/soc/samsung/tm2_wm5110.c | 8 +--
sound/soc/sh/dma-sh7760.c | 12 ++--
sound/soc/sh/fsi.c | 2 +-
sound/soc/sh/migor.c | 4 +-
sound/soc/sh/rcar/core.c | 4 +-
sound/soc/soc-component.c | 20 +++---
sound/soc/soc-dai.c | 8 +--
sound/soc/soc-dapm.c | 6 +-
sound/soc/soc-generic-dmaengine-pcm.c | 4 +-
sound/soc/soc-link.c | 12 ++--
sound/soc/soc-pcm.c | 62 +++++++++----------
sound/soc/soc-utils.c | 2 +-
sound/soc/sof/intel/hda-dai.c | 10 +--
sound/soc/sof/intel/hda-dsp.c | 2 +-
sound/soc/sof/intel/hda-pcm.c | 2 +-
sound/soc/sof/pcm.c | 18 +++---
sound/soc/sprd/sprd-pcm-dma.c | 2 +-
sound/soc/stm/stm32_adfsdm.c | 12 ++--
sound/soc/stm/stm32_sai_sub.c | 2 +-
sound/soc/sunxi/sun4i-codec.c | 12 ++--
sound/soc/sunxi/sun4i-spdif.c | 2 +-
sound/soc/tegra/tegra_alc5632.c | 2 +-
sound/soc/tegra/tegra_max98090.c | 2 +-
sound/soc/tegra/tegra_rt5640.c | 2 +-
sound/soc/tegra/tegra_rt5677.c | 2 +-
sound/soc/tegra/tegra_sgtl5000.c | 2 +-
sound/soc/tegra/tegra_wm8753.c | 2 +-
sound/soc/tegra/tegra_wm8903.c | 2 +-
sound/soc/tegra/trimslice.c | 2 +-
sound/soc/ti/davinci-evm.c | 6 +-
sound/soc/ti/davinci-vcif.c | 4 +-
sound/soc/ti/j721e-evm.c | 6 +-
sound/soc/ti/n810.c | 4 +-
sound/soc/ti/omap-abe-twl6040.c | 4 +-
sound/soc/ti/omap-mcbsp.c | 4 +-
sound/soc/ti/omap-twl4030.c | 2 +-
sound/soc/ti/omap3pandora.c | 2 +-
sound/soc/ti/osk5912.c | 2 +-
sound/soc/ti/rx51.c | 4 +-
sound/soc/uniphier/aio-dma.c | 6 +-
sound/soc/ux500/mop500_ab8500.c | 8 +--
sound/soc/ux500/ux500_pcm.c | 2 +-
sound/soc/xtensa/xtfpga-i2s.c | 2 +-
177 files changed, 397 insertions(+), 395 deletions(-)
--
2.25.1
|
|
This patch converts ROHM BD28623UMV class D speaker amplifier binding
to DT schema.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200722174215.988974-1-katsuhiro@katsuster.net
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In order to support configuring dai fmt through DT, add some properties.
These properiese are same as the properties in simple card.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/1595302910-19688-2-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Support same propeties as simple card for configuring fmt
from DT.
In order to make this change compatible with old DT, these
properties are optional.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/1595302910-19688-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
ESAI interfaces may share same interrupt line with EDMA on
some platforms (e.g. i.MX8QXP, i.MX8QM).
Add IRQF_SHARED flag to allow sharing the irq among several
devices
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/1595476808-28927-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Build errors are seen on 32-bit platforms because of a plain 64-by-32
division. For example, following build erros were reported.
"ERROR: modpost: "__udivdi3" [sound/soc/tegra/snd-soc-tegra210-dmic.ko]
undefined!"
"ERROR: modpost: "__divdi3" [sound/soc/tegra/snd-soc-tegra210-dmic.ko]
undefined!"
This can be fixed by using div_u64() helper from 'math64.h' header.
Fixes: 8c8ff982e9e2 ("ASoC: tegra: Add Tegra210 based DMIC driver")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1595492011-2411-1-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
SND_SOC_J721E_EVM should not select SND_SOC_PCM3168A_I2C when I2C
is not enabled. That causes build errors, so make this driver's
symbol depend on I2C.
WARNING: unmet direct dependencies detected for SND_SOC_PCM3168A_I2C
Depends on [n]: SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && I2C [=n]
Selected by [m]:
- SND_SOC_J721E_EVM [=m] && SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && (DMA_OMAP [=y] || TI_EDMA [=m] || TI_K3_UDMA [=n] || COMPILE_TEST [=y]) && (ARCH_K3_J721E_SOC [=n] || COMPILE_TEST [=y])
../sound/soc/codecs/pcm3168a-i2c.c:59:1: warning: data definition has no type or storage class
module_i2c_driver(pcm3168a_i2c_driver);
^~~~~~~~~~~~~~~~~
../sound/soc/codecs/pcm3168a-i2c.c:59:1: error: type defaults to ‘int’ in declaration of ‘module_i2c_driver’ [-Werror=implicit-int]
../sound/soc/codecs/pcm3168a-i2c.c:59:1: warning: parameter names (without types) in function declaration
../sound/soc/codecs/pcm3168a-i2c.c:49:26: warning: ‘pcm3168a_i2c_driver’ defined but not used [-Wunused-variable]
static struct i2c_driver pcm3168a_i2c_driver = {
^~~~~~~~~~~~~~~~~~~
cc1: some warnings being treated as errors
Fixes: 6748d0559059 ("ASoC: ti: Add custom machine driver for j721e EVM (CPB and IVI)")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/e74c690c-c7f8-fd42-e461-4f33571df4ef@infradead.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://lore.kernel.org/r/20200718112403.13709-1-grandmaster@al2klimov.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Coefficient files now support additional metadata blocks, these
contain machine parsable text strings describing the parameters
contained in the coefficient file.
Signed-off-by: James Schulman <james.schulman@cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200723110321.16382-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://lore.kernel.org/r/20200718111209.11760-1-grandmaster@al2klimov.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://lore.kernel.org/r/20200718110857.11520-1-grandmaster@al2klimov.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Commit adc0daad366b62ca1bce3e2958a40b0b71a8b8b3 ("dm: report suspended
device during destroy") broke integrity recalculation.
The problem is dm_suspended() returns true not only during suspend,
but also during resume. So this race condition could occur:
1. dm_integrity_resume calls queue_work(ic->recalc_wq, &ic->recalc_work)
2. integrity_recalc (&ic->recalc_work) preempts the current thread
3. integrity_recalc calls if (unlikely(dm_suspended(ic->ti))) goto unlock_ret;
4. integrity_recalc exits and no recalculating is done.
To fix this race condition, add a function dm_post_suspending that is
only true during the postsuspend phase and use it instead of
dm_suspended().
Signed-off-by: Mikulas Patocka <mpatocka redhat com>
Fixes: adc0daad366b ("dm: report suspended device during destroy")
Cc: stable vger kernel org # v4.18+
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Now we can use asoc_substream_to_rtd() macro,
let's use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87sgdnyoea.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Now we can use asoc_substream_to_rtd() macro,
let's use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87tuy3yoef.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Now we can use asoc_substream_to_rtd() macro,
let's use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87v9ijyoek.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Now we can use asoc_substream_to_rtd() macro,
let's use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87wo2zyoeo.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Now we can use asoc_substream_to_rtd() macro,
let's use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87y2nfyoes.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Now we can use asoc_substream_to_rtd() macro,
let's use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87zh7vyoex.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Now we can use asoc_substream_to_rtd() macro,
let's use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/871rl70yse.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Now we can use asoc_substream_to_rtd() macro,
let's use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87365n0ysi.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Now we can use asoc_substream_to_rtd() macro,
let's use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/874kq30ysm.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Now we can use asoc_substream_to_rtd() macro,
let's use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/875zaj0ysr.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Now we can use asoc_substream_to_rtd() macro,
let's use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/878sff0yt0.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Now we can use asoc_substream_to_rtd() macro,
let's use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87a6zv0yt5.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Now we can use asoc_substream_to_rtd() macro,
let's use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87blkb0ytd.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Now we can use asoc_substream_to_rtd() macro,
let's use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87d04r0yth.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Now we can use asoc_substream_to_rtd() macro,
let's use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87eep70ytr.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Now we can use asoc_substream_to_rtd() macro,
let's use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87ft9n0ytv.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Now we can use asoc_substream_to_rtd() macro,
let's use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87h7u30yu1.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Now we can use asoc_substream_to_rtd() macro,
let's use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87imej0yu5.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Now we can use asoc_substream_to_rtd() macro,
let's use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87k0yz0yua.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Now we can use asoc_substream_to_rtd() macro,
let's use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87lfjf0yuf.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Now we can use asoc_substream_to_rtd() macro,
let's use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87mu3v0yuj.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Now we can use asoc_substream_to_rtd() macro,
let's use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87o8ob0yun.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Now we can use asoc_substream_to_rtd() macro,
let's use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87pn8r0yus.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Now we can use asoc_substream_to_rtd() macro,
let's use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87r1t70yuw.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Now we can use asoc_substream_to_rtd() macro,
let's use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87sgdn0yv1.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Now we can use asoc_substream_to_rtd() macro,
let's use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87tuy30yv5.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Now we can use asoc_substream_to_rtd() macro,
let's use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87v9ij0yv9.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Current soc-xxx are getting rtd from substream by
rtd = substream->private_data;
But, getting data from "private_data" is very unclear.
This patch adds asoc_substream_to_rtd() macro which is
easy to understand that rtd from substream.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87wo2z0yve.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
