| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"There have been some significant changes in the core side, both for
ALSA and ASoC, while lots of development have been seen in SOF, as
well as many small fixes/improvements for ASoC codecs and platforms.
Below is a highlight in this cycle:
Core:
- The unification of PCM vmalloc buffer allocation helpers into the
standard API
- Clean up of the default PCM mmap handling for vmalloc & SG-buffer
- Fix potential races at ALSA timer open
- A few new PCM API extensions; just preliminary core changes, the
actual changes in drivers will be merged in 5.6
- Continued ASoC componentization works; now almost everything is a
common ASoC component object. A lot of refactoring and
simplification have been done along with it.
ASoC:
- Many fixes to the Sound Open Firmware (SOF) code
- Wake on voice support for Chromebooks
- SPI support and trigger word detection for RT5677
- New drivers for Analog Devices ADAU7118, Intel Cannonlake systems
with RT1011 and RT5682, Texas Instruments TAS2562 and TAS2770
HD-audio:
- Improved Intel DSP configuration / probe code for SOF
- Plumbing the legacy HD-audio driver with Intel SOF HDMI
- DP-MST support for Nvidia HDMI codecs
- Realtek quirks cleanups and new additions as usual
Others:
- Lots of refactoring and cleanups for FireWire; period-size sharing,
h/w IRQ interval configuration, clock recovery improvements, etc
- USB-audio: Scarlett mixer quirks
- Cleanups of PCM calls in various drivers (including media and USB)
to adapt the core API changes"
* tag 'sound-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (497 commits)
ALSA: usb-audio: Fix Focusrite Scarlett 6i6 gen1 - input handling
ALSA: hda/realtek - Enable internal speaker of ASUS UX431FLC
ALSA: aloop: Fix dependency on timer API
ASoC: DMI long name - avoid to add board name if matches with product name
ASoC: improve the DMI long card code in asoc-core
ASoC: rsnd: fix DALIGN register for SSIU
ALSA: aloop: Avoid unexpected timer event callback tasklets
ALSA: aloop: Remove redundant locking in timer open function
ASoC: component: Add sync_stop PCM ops
ASoC: pcm: Make ioctl ops optional
ALSA: hda/hdmi - Clear codec->relaxed_resume flag at unbinding
ALSA: hda - Disable audio component for legacy Nvidia HDMI codecs
ALSA: cs4236: fix error return comparison of an unsigned integer
ALSA: usb-audio: Fix NULL dereference at parsing BADD
ALSA: usb-audio: Fix Scarlett 6i6 Gen 2 port data
ALSA: hda/realtek - Enable the headset-mic on a Xiaomi's laptop
ALSA: hda/realtek - Move some alc236 pintbls to fallback table
ALSA: hda/realtek - Move some alc256 pintbls to fallback table
ALSA: docs: Update about the new PCM sync_stop ops
ALSA: pcm: Add card sync_irq field
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull device properties framework updates from Rafael Wysocki:
"Add support for printing fwnode names using a new conversion specifier
"%pfw" (Sakari Ailus), clean up the software node and
efi/apple-properties code in preparation for improved software node
reference properties handling (Dmitry Torokhov) and fix the struct
fwnode_operations description (Heikki Krogerus)"
* tag 'devprop-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (22 commits)
software node: simplify property_entry_read_string_array()
software node: unify PROPERTY_ENTRY_XXX macros
software node: remove property_entry_read_uNN_array functions
software node: get rid of property_set_pointer()
software node: clean up property_copy_string_array()
software node: mark internal macros with double underscores
efi/apple-properties: use PROPERTY_ENTRY_U8_ARRAY_LEN
software node: introduce PROPERTY_ENTRY_XXX_ARRAY_LEN()
software node: remove DEV_PROP_MAX
device property: Fix the description of struct fwnode_operations
lib/test_printf: Add tests for %pfw printk modifier
lib/vsprintf: Add %pfw conversion specifier for printing fwnode names
lib/vsprintf: OF nodes are first and foremost, struct device_nodes
lib/vsprintf: Make use of fwnode API to obtain node names and separators
lib/vsprintf: Add a note on re-using %pf or %pF
lib/vsprintf: Remove support for %pF and %pf in favour of %pS and %ps
device property: Add a function to obtain a node's prefix
device property: Add fwnode_get_name for returning the name of a node
device property: Add functions for accessing node's parents
device property: Move fwnode_get_parent() up
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These update the ACPICA code in the kernel to upstream revision
20191018, add support for EFI specific purpose memory, update the ACPI
EC driver to make it work on systems with hardware-reduced ACPI,
improve ACPI-based device enumeration for some platforms, rework the
lid blacklist handling in the button driver and add more lid quirks to
it, unify ACPI _HID/_UID matching, fix assorted issues and clean up
the code and documentation.
Specifics:
- Update the ACPICA code in the kernel to upstream revision 20191018
including:
* Fixes for Clang warnings (Bob Moore)
* Fix for possible overflow in get_tick_count() (Bob Moore)
* Introduction of acpi_unload_table() (Bob Moore)
* Debugger and utilities updates (Erik Schmauss)
* Fix for unloading tables loaded via configfs (Nikolaus Voss)
- Add support for EFI specific purpose memory to optionally allow
either application-exclusive or core-kernel-mm managed access to
differentiated memory (Dan Williams)
- Fix and clean up processing of the HMAT table (Brice Goglin, Qian
Cai, Tao Xu)
- Update the ACPI EC driver to make it work on systems with
hardware-reduced ACPI (Daniel Drake)
- Always build in support for the Generic Event Device (GED) to allow
one kernel binary to work both on systems with full hardware ACPI
and hardware-reduced ACPI (Arjan van de Ven)
- Fix the table unload mechanism to unregister platform devices
created when the given table was loaded (Andy Shevchenko)
- Rework the lid blacklist handling in the button driver and add more
lid quirks to it (Hans de Goede)
- Improve ACPI-based device enumeration for some platforms based on
Intel BayTrail SoCs (Hans de Goede)
- Add an OpRegion driver for the Cherry Trail Crystal Cove PMIC and
prevent handlers from being registered for unhandled PMIC OpRegions
(Hans de Goede)
- Unify ACPI _HID/_UID matching (Andy Shevchenko)
- Clean up documentation and comments (Cao jin, James Pack, Kacper
Piwiński)"
* tag 'acpi-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (52 commits)
ACPI: OSI: Shoot duplicate word
ACPI: HMAT: use %u instead of %d to print u32 values
ACPI: NUMA: HMAT: fix a section mismatch
ACPI: HMAT: don't mix pxm and nid when setting memory target processor_pxm
ACPI: NUMA: HMAT: Register "soft reserved" memory as an "hmem" device
ACPI: NUMA: HMAT: Register HMAT at device_initcall level
device-dax: Add a driver for "hmem" devices
dax: Fix alloc_dax_region() compile warning
lib: Uplevel the pmem "region" ida to a global allocator
x86/efi: Add efi_fake_mem support for EFI_MEMORY_SP
arm/efi: EFI soft reservation to memblock
x86/efi: EFI soft reservation to E820 enumeration
efi: Common enable/disable infrastructure for EFI soft reservation
x86/efi: Push EFI_MEMMAP check into leaf routines
efi: Enumerate EFI_MEMORY_SP
ACPI: NUMA: Establish a new drivers/acpi/numa/ directory
ACPICA: Update version to 20191018
ACPICA: debugger: remove leading whitespaces when converting a string to a buffer
ACPICA: acpiexec: initialize all simple types and field units from user input
ACPICA: debugger: add field unit support for acpi_db_get_next_token
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These include cpuidle changes to use nanoseconds (instead of
microseconds) as the unit of time and to simplify checks for disabled
idle states in the idle loop, some cpuidle fixes and governor updates,
assorted cpufreq updates (driver updates mostly and a few core fixes
and cleanups), devfreq updates (dominated by the tegra30 driver
changes), new CPU IDs for the RAPL power capping driver, relatively
minor updates of the generic power domains (genpd) and operation
performance points (OPP) frameworks, and assorted fixes and cleanups.
There are also two maintainer information updates: Chanwoo Choi will
be maintaining the devfreq subsystem going forward and Todd Brandt is
going to maintain the pm-graph utility (created by him).
Specifics:
- Use nanoseconds (instead of microseconds) as the unit of time in
the cpuidle core and simplify checks for disabled idle states in
the idle loop (Rafael Wysocki)
- Fix and clean up the teo cpuidle governor (Rafael Wysocki)
- Fix the cpuidle registration error code path (Zhenzhong Duan)
- Avoid excessive vmexits in the ACPI cpuidle driver (Yin Fengwei)
- Extend the idle injection infrastructure to be able to measure the
requested duration in nanoseconds and to allow an exit latency
limit for idle states to be specified (Daniel Lezcano)
- Fix cpufreq driver registration and clarify a comment in the
cpufreq core (Viresh Kumar)
- Add NULL checks to the show() and store() methods of sysfs
attributes exposed by cpufreq (Kai Shen)
- Update cpufreq drivers:
* Fix for a plain int as pointer warning from sparse in
intel_pstate (Jamal Shareef)
* Fix for a hardcoded number of CPUs and stack bloat in the
powernv driver (John Hubbard)
* Updates to the ti-cpufreq driver and DT files to support new
platforms and migrate bindings from opp-v1 to opp-v2 (Adam Ford,
H. Nikolaus Schaller)
* Merging of the arm_big_little and vexpress-spc drivers and
related cleanup (Sudeep Holla)
* Fix for imx's default speed grade value (Anson Huang)
* Minor cleanup of the s3c64xx driver (Nathan Chancellor)
* CPU speed bin detection fix for sun50i (Ondrej Jirman)
- Appoint Chanwoo Choi as the new devfreq maintainer.
- Update the devfreq core:
* Check NULL governor in available_governors_show sysfs to prevent
showing wrong governor information and fix a race condition
between devfreq_update_status() and trans_stat_show() (Leonard
Crestez)
* Add new 'interrupt-driven' flag for devfreq governors to allow
interrupt-driven governors to prevent the devfreq core from
polling devices for status (Dmitry Osipenko)
* Improve an error message in devfreq_add_device() (Matthias
Kaehlcke)
- Update devfreq drivers:
* tegra30 driver fixes and cleanups (Dmitry Osipenko)
* Removal of unused property from dt-binding documentation for the
exynos-bus driver (Kamil Konieczny)
* exynos-ppmu cleanup and DT bindings update (Lukasz Luba, Marek
Szyprowski)
- Add new CPU IDs for CometLake Mobile and Desktop to the Intel RAPL
power capping driver (Zhang Rui)
- Allow device initialization in the generic power domains (genpd)
framework to be more straightforward and clean it up (Ulf Hansson)
- Add support for adjusting OPP voltages at run time to the OPP
framework (Stephen Boyd)
- Avoid freeing memory that has never been allocated in the
hibernation core (Andy Whitcroft)
- Clean up function headers in a header file and coding style in the
wakeup IRQs handling code (Ulf Hansson, Xiaofei Tan)
- Clean up the SmartReflex adaptive voltage scaling (AVS) driver for
ARM (Ben Dooks, Geert Uytterhoeven)
- Wrap power management documentation to fit in 80 columns (Bjorn
Helgaas)
- Add pm-graph utility entry to MAINTAINERS (Todd Brandt)
- Update the cpupower utility:
* Fix the handling of set and info subcommands (Abhishek Goel)
* Fix build warnings (Nathan Chancellor)
* Improve mperf_monitor handling (Janakarajan Natarajan)"
* tag 'pm-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (83 commits)
PM: Wrap documentation to fit in 80 columns
cpuidle: Pass exit latency limit to cpuidle_use_deepest_state()
cpuidle: Allow idle injection to apply exit latency limit
cpuidle: Introduce cpuidle_driver_state_disabled() for driver quirks
cpuidle: teo: Avoid code duplication in conditionals
cpufreq: Register drivers only after CPU devices have been registered
cpuidle: teo: Avoid using "early hits" incorrectly
cpuidle: teo: Exclude cpuidle overhead from computations
PM / Domains: Convert to dev_to_genpd_safe() in genpd_syscore_switch()
mmc: tmio: Avoid boilerplate code in ->runtime_suspend()
PM / Domains: Implement the ->start() callback for genpd
PM / Domains: Introduce dev_pm_domain_start()
ARM: OMAP2+: SmartReflex: add omap_sr_pdata definition
PM / wakeirq: remove unnecessary parentheses
power: avs: smartreflex: Remove superfluous cast in debugfs_create_file() call
cpuidle: Use nanoseconds as the unit of time
PM / OPP: Support adjusting OPP voltages at runtime
PM / core: Clean up some function headers in power.h
cpufreq: Add NULL checks to show() and store() methods of cpufreq
cpufreq: intel_pstate: Fix plain int as pointer warning from sparse
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 merge fix from Ingo Molnar:
"I missed one other semantic conflict that can result in build failures
on certain stripped down x86 32-bit configs, for example 32-bit
'allnoconfig' where CONFIG_X86_IOPL_IOPERM gets turned off"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/iopl: Make 'struct tss_struct' constant size again
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"The main changes in this cycle were:
- A comprehensive rewrite of the robust/PI futex code's exit handling
to fix various exit races. (Thomas Gleixner et al)
- Rework the generic REFCOUNT_FULL implementation using
atomic_fetch_* operations so that the performance impact of the
cmpxchg() loops is mitigated for common refcount operations.
With these performance improvements the generic implementation of
refcount_t should be good enough for everybody - and this got
confirmed by performance testing, so remove ARCH_HAS_REFCOUNT and
REFCOUNT_FULL entirely, leaving the generic implementation enabled
unconditionally. (Will Deacon)
- Other misc changes, fixes, cleanups"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
lkdtm: Remove references to CONFIG_REFCOUNT_FULL
locking/refcount: Remove unused 'refcount_error_report()' function
locking/refcount: Consolidate implementations of refcount_t
locking/refcount: Consolidate REFCOUNT_{MAX,SATURATED} definitions
locking/refcount: Move saturation warnings out of line
locking/refcount: Improve performance of generic REFCOUNT_FULL code
locking/refcount: Move the bulk of the REFCOUNT_FULL implementation into the <linux/refcount.h> header
locking/refcount: Remove unused refcount_*_checked() variants
locking/refcount: Ensure integer operands are treated as signed
locking/refcount: Define constants for saturation and max refcount values
futex: Prevent exit livelock
futex: Provide distinct return value when owner is exiting
futex: Add mutex around futex exit
futex: Provide state handling for exec() as well
futex: Sanitize exit state handling
futex: Mark the begin of futex exit explicitly
futex: Set task::futex_state to DEAD right after handling futex exit
futex: Split futex_mm_release() for exit/exec
exit/exec: Seperate mm_release()
futex: Replace PF_EXITPIDONE with a state
...
|
|
In gve_alloc_queue_page_list(), when a page allocation fails,
qpl->num_entries will be wrong. In this case priv->num_registered_pages
can underflow in gve_free_queue_page_list(), causing subsequent calls
to gve_alloc_queue_page_list() to fail.
Fixes: f5cedc84a30d ("gve: Add transmit and receive support")
Signed-off-by: Jeroen de Borst <jeroendb@google.com>
Reviewed-by: Catherine Sullivan <csully@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU updates from Ingo Molnar:
"The main changes in this cycle were:
- Dynamic tick (nohz) updates, perhaps most notably changes to force
the tick on when needed due to lengthy in-kernel execution on CPUs
on which RCU is waiting.
- Linux-kernel memory consistency model updates.
- Replace rcu_swap_protected() with rcu_prepace_pointer().
- Torture-test updates.
- Documentation updates.
- Miscellaneous fixes"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (51 commits)
security/safesetid: Replace rcu_swap_protected() with rcu_replace_pointer()
net/sched: Replace rcu_swap_protected() with rcu_replace_pointer()
net/netfilter: Replace rcu_swap_protected() with rcu_replace_pointer()
net/core: Replace rcu_swap_protected() with rcu_replace_pointer()
bpf/cgroup: Replace rcu_swap_protected() with rcu_replace_pointer()
fs/afs: Replace rcu_swap_protected() with rcu_replace_pointer()
drivers/scsi: Replace rcu_swap_protected() with rcu_replace_pointer()
drm/i915: Replace rcu_swap_protected() with rcu_replace_pointer()
x86/kvm/pmu: Replace rcu_swap_protected() with rcu_replace_pointer()
rcu: Upgrade rcu_swap_protected() to rcu_replace_pointer()
rcu: Suppress levelspread uninitialized messages
rcu: Fix uninitialized variable in nocb_gp_wait()
rcu: Update descriptions for rcu_future_grace_period tracepoint
rcu: Update descriptions for rcu_nocb_wake tracepoint
rcu: Remove obsolete descriptions for rcu_barrier tracepoint
rcu: Ensure that ->rcu_urgent_qs is set before resched IPI
workqueue: Convert for_each_wq to use built-in list check
rcu: Several rcu_segcblist functions can be static
rcu: Remove unused function hlist_bl_del_init_rcu()
Documentation: Rename rcu_node_context_switch() to rcu_note_context_switch()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"The biggest changes in this cycle were:
- Make kcpustat vtime aware (Frederic Weisbecker)
- Rework the CFS load_balance() logic (Vincent Guittot)
- Misc cleanups, smaller enhancements, fixes.
The load-balancing rework is the most intrusive change: it replaces
the old heuristics that have become less meaningful after the
introduction of the PELT metrics, with a grounds-up load-balancing
algorithm.
As such it's not really an iterative series, but replaces the old
load-balancing logic with the new one. We hope there are no
performance regressions left - but statistically it's highly probable
that there *is* going to be some workload that is hurting from these
chnages. If so then we'd prefer to have a look at that workload and
fix its scheduling, instead of reverting the changes"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
rackmeter: Use vtime aware kcpustat accessor
leds: Use all-in-one vtime aware kcpustat accessor
cpufreq: Use vtime aware kcpustat accessors for user time
procfs: Use all-in-one vtime aware kcpustat accessor
sched/vtime: Bring up complete kcpustat accessor
sched/cputime: Support other fields on kcpustat_field()
sched/cpufreq: Move the cfs_rq_util_change() call to cpufreq_update_util()
sched/fair: Add comments for group_type and balancing at SD_NUMA level
sched/fair: Fix rework of find_idlest_group()
sched/uclamp: Fix overzealous type replacement
sched/Kconfig: Fix spelling mistake in user-visible help text
sched/core: Further clarify sched_class::set_next_task()
sched/fair: Use mul_u32_u32()
sched/core: Simplify sched_class::pick_next_task()
sched/core: Optimize pick_next_task()
sched/core: Make pick_next_task_idle() more consistent
sched/fair: Better document newidle_balance()
leds: Use vtime aware kcpustat accessor to fetch CPUTIME_SYSTEM
cpufreq: Use vtime aware kcpustat accessor to fetch CPUTIME_SYSTEM
procfs: Use vtime aware kcpustat accessor to fetch CPUTIME_SYSTEM
...
|
|
Any argument outside of that range would result in an out of bound
memory access, since the accessed array is 65536 bits long.
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When user-space sets the OVS_UFID_F_OMIT_* flags, and the relevant
flow has no UFID, we can exceed the computed size, as
ovs_nla_put_identifier() will always dump an OVS_FLOW_ATTR_KEY
attribute.
Take the above in account when computing the flow command message
size.
Fixes: 74ed7ab9264c ("openvswitch: Add support for unique flow IDs.")
Reported-by: Qi Jun Ding <qding@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
"The main kernel side changes in this cycle were:
- Various Intel-PT updates and optimizations (Alexander Shishkin)
- Prohibit kprobes on Xen/KVM emulate prefixes (Masami Hiramatsu)
- Add support for LSM and SELinux checks to control access to the
perf syscall (Joel Fernandes)
- Misc other changes, optimizations, fixes and cleanups - see the
shortlog for details.
There were numerous tooling changes as well - 254 non-merge commits.
Here are the main changes - too many to list in detail:
- Enhancements to core tooling infrastructure, perf.data, libperf,
libtraceevent, event parsing, vendor events, Intel PT, callchains,
BPF support and instruction decoding.
- There were updates to the following tools:
perf annotate
perf diff
perf inject
perf kvm
perf list
perf maps
perf parse
perf probe
perf record
perf report
perf script
perf stat
perf test
perf trace
- And a lot of other changes: please see the shortlog and Git log for
more details"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (279 commits)
perf parse: Fix potential memory leak when handling tracepoint errors
perf probe: Fix spelling mistake "addrees" -> "address"
libtraceevent: Fix memory leakage in copy_filter_type
libtraceevent: Fix header installation
perf intel-bts: Does not support AUX area sampling
perf intel-pt: Add support for decoding AUX area samples
perf intel-pt: Add support for recording AUX area samples
perf pmu: When using default config, record which bits of config were changed by the user
perf auxtrace: Add support for queuing AUX area samples
perf session: Add facility to peek at all events
perf auxtrace: Add support for dumping AUX area samples
perf inject: Cut AUX area samples
perf record: Add aux-sample-size config term
perf record: Add support for AUX area sampling
perf auxtrace: Add support for AUX area sample recording
perf auxtrace: Move perf_evsel__find_pmu()
perf record: Add a function to test for kernel support for AUX area sampling
perf tools: Add kernel AUX area sampling definitions
perf/core: Make the mlock accounting simple again
perf report: Jump to symbol source view from total cycles view
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI updates from Ingo Molnar:
"The main changes in this cycle were:
- Wire up the EFI RNG code for x86. This enables an additional source
of entropy during early boot.
- Enable the TPM event log code on ARM platforms.
- Update Ard's email address"
* 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: libstub/tpm: enable tpm eventlog function for ARM platforms
x86: efi/random: Invoke EFI_RNG_PROTOCOL to seed the UEFI RNG table
efi/random: use arch-independent efi_call_proto()
MAINTAINERS: update Ard's email address to @kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull stacktrace cleanup from Ingo Molnar:
"A minor cleanup"
* 'core-stacktrace-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
stacktrace: Get rid of unneeded '!!' pattern
|
|
Fix the return paths for all I/O operations to ensure
that the I/O completed successfully. Then pass the return
to the caller for further processing
Fixes: 01db923e8377 ("net: phy: dp83869: Add TI dp83869 phy")
Reported-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We need to calculate the skb size correctly otherwise we risk triggering
skb_over_panic[1]. The issue is that data_len is added to the skb in a
nl attribute, but we don't account for its header size (nlattr 4 bytes)
and alignment. We account for it when calculating the total size in
the > PSAMPLE_MAX_PACKET_SIZE comparison correctly, but not when
allocating after that. The fix is simple - use nla_total_size() for
data_len when allocating.
To reproduce:
$ tc qdisc add dev eth1 clsact
$ tc filter add dev eth1 egress matchall action sample rate 1 group 1 trunc 129
$ mausezahn eth1 -b bcast -a rand -c 1 -p 129
< skb_over_panic BUG(), tail is 4 bytes past skb->end >
[1] Trace:
[ 50.459526][ T3480] skbuff: skb_over_panic: text:(____ptrval____) len:196 put:136 head:(____ptrval____) data:(____ptrval____) tail:0xc4 end:0xc0 dev:<NULL>
[ 50.474339][ T3480] ------------[ cut here ]------------
[ 50.481132][ T3480] kernel BUG at net/core/skbuff.c:108!
[ 50.486059][ T3480] invalid opcode: 0000 [#1] PREEMPT SMP
[ 50.489463][ T3480] CPU: 3 PID: 3480 Comm: mausezahn Not tainted 5.4.0-rc7 #108
[ 50.492844][ T3480] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-2.fc30 04/01/2014
[ 50.496551][ T3480] RIP: 0010:skb_panic+0x79/0x7b
[ 50.498261][ T3480] Code: bc 00 00 00 41 57 4c 89 e6 48 c7 c7 90 29 9a 83 4c 8b 8b c0 00 00 00 50 8b 83 b8 00 00 00 50 ff b3 c8 00 00 00 e8 ae ef c0 fe <0f> 0b e8 2f df c8 fe 48 8b 55 08 44 89 f6 4c 89 e7 48 c7 c1 a0 22
[ 50.504111][ T3480] RSP: 0018:ffffc90000447a10 EFLAGS: 00010282
[ 50.505835][ T3480] RAX: 0000000000000087 RBX: ffff888039317d00 RCX: 0000000000000000
[ 50.507900][ T3480] RDX: 0000000000000000 RSI: ffffffff812716e1 RDI: 00000000ffffffff
[ 50.509820][ T3480] RBP: ffffc90000447a60 R08: 0000000000000001 R09: 0000000000000000
[ 50.511735][ T3480] R10: ffffffff81d4f940 R11: 0000000000000000 R12: ffffffff834a22b0
[ 50.513494][ T3480] R13: ffffffff82c10433 R14: 0000000000000088 R15: ffffffff838a8084
[ 50.515222][ T3480] FS: 00007f3536462700(0000) GS:ffff88803eac0000(0000) knlGS:0000000000000000
[ 50.517135][ T3480] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 50.518583][ T3480] CR2: 0000000000442008 CR3: 000000003b222000 CR4: 00000000000006e0
[ 50.520723][ T3480] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 50.522709][ T3480] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 50.524450][ T3480] Call Trace:
[ 50.525214][ T3480] skb_put.cold+0x1b/0x1b
[ 50.526171][ T3480] psample_sample_packet+0x1d3/0x340
[ 50.527307][ T3480] tcf_sample_act+0x178/0x250
[ 50.528339][ T3480] tcf_action_exec+0xb1/0x190
[ 50.529354][ T3480] mall_classify+0x67/0x90
[ 50.530332][ T3480] tcf_classify+0x72/0x160
[ 50.531286][ T3480] __dev_queue_xmit+0x3db/0xd50
[ 50.532327][ T3480] dev_queue_xmit+0x18/0x20
[ 50.533299][ T3480] packet_sendmsg+0xee7/0x2090
[ 50.534331][ T3480] sock_sendmsg+0x54/0x70
[ 50.535271][ T3480] __sys_sendto+0x148/0x1f0
[ 50.536252][ T3480] ? tomoyo_file_ioctl+0x23/0x30
[ 50.537334][ T3480] ? ksys_ioctl+0x5e/0xb0
[ 50.540068][ T3480] __x64_sys_sendto+0x2a/0x30
[ 50.542810][ T3480] do_syscall_64+0x73/0x1f0
[ 50.545383][ T3480] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 50.548477][ T3480] RIP: 0033:0x7f35357d6fb3
[ 50.551020][ T3480] Code: 48 8b 0d 18 90 20 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d f9 d3 20 00 00 75 13 49 89 ca b8 2c 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 34 c3 48 83 ec 08 e8 eb f6 ff ff 48 89 04 24
[ 50.558547][ T3480] RSP: 002b:00007ffe0c7212c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
[ 50.561870][ T3480] RAX: ffffffffffffffda RBX: 0000000001dac010 RCX: 00007f35357d6fb3
[ 50.565142][ T3480] RDX: 0000000000000082 RSI: 0000000001dac2a2 RDI: 0000000000000003
[ 50.568469][ T3480] RBP: 00007ffe0c7212f0 R08: 00007ffe0c7212d0 R09: 0000000000000014
[ 50.571731][ T3480] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000082
[ 50.574961][ T3480] R13: 0000000001dac2a2 R14: 0000000000000001 R15: 0000000000000003
[ 50.578170][ T3480] Modules linked in: sch_ingress virtio_net
[ 50.580976][ T3480] ---[ end trace 61a515626a595af6 ]---
CC: Yotam Gigi <yotamg@mellanox.com>
CC: Jiri Pirko <jiri@mellanox.com>
CC: Jamal Hadi Salim <jhs@mojatatu.com>
CC: Simon Horman <simon.horman@netronome.com>
CC: Roopa Prabhu <roopa@cumulusnetworks.com>
Fixes: 6ae0a6286171 ("net: Introduce psample, a new genetlink channel for packet sampling")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Phong Tran says:
====================
Fix -Wcast-function-type usb net drivers
Change log with v1:
- Modify suffix of patch subject.
- Did the checkpatch.pl (remove the space, add a blank line).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
correct usage prototype of callback in tasklet_init().
Report by https://github.com/KSPP/linux/issues/20
Signed-off-by: Phong Tran <tranmanphong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
correct usage prototype of callback in tasklet_init().
Report by https://github.com/KSPP/linux/issues/20
Signed-off-by: Phong Tran <tranmanphong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In the quest to bring io_kiocb down to 3 cachelines, this one does
the trick. Make the wait_queue_entry for the poll command come out
of kmalloc instead of embedding it in struct io_poll_iocb, as the
latter is the largest member of io_kiocb. Once we trim this down a
bit, we're back at a healthy 192 bytes for struct io_kiocb.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently we're using 40 bytes for the io_wq_work structure, and 16 of
those is the doubly link list node. We don't need doubly linked lists,
we always add to tail to keep things ordered, and any other use case
is list traversal with deletion. For the deletion case, we can easily
support any node deletion by keeping track of the previous entry.
This shrinks io_wq_work to 32 bytes, and subsequently io_kiock from
io_uring to 216 to 208 bytes.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There are several things that can go wrong in the current code on NUMA
systems, especially if not all nodes are online all the time:
- If the identifiers of the online nodes do not form a single contiguous
block starting at zero, wq->wqes will be too small, and OOB memory
accesses will occur e.g. in the loop in io_wq_create().
- If a node comes online between the call to num_online_nodes() and the
for_each_node() loop in io_wq_create(), an OOB write will occur.
- If a node comes online between io_wq_create() and io_wq_enqueue(), a
lookup is performed for an element that doesn't exist, and an OOB read
will probably occur.
Fix it by:
- using nr_node_ids instead of num_online_nodes() for the allocation size;
nr_node_ids is calculated by setup_nr_node_ids() to be bigger than the
highest node ID that could possibly come online at some point, even if
those nodes' identifiers are not a contiguous block
- creating workers for all possible CPUs, not just all online ones
This is basically what the normal workqueue code also does, as far as I can
tell.
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
These allocations are single-element allocations, so don't use the array
allocation wrapper for them.
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Clean io_import_fixed() call site and make it return proper type.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There is no point left in keeping struct sqe_submit. Inline it
into struct io_kiocb, so any req->submit.field is now just req->field
- moves initialisation of ring_file into io_get_req()
- removes duplicated req->sequence.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Timeouts' sequence offset (i.e. sqe->off) is stored in
req->submit.sequence under a false name. Keep it in timeout.data
instead. The unused space for sequence will be reclaimed in the
following patches.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Only io_uring uses (and added) these, and we want to disallow the
use of sendmsg/recvmsg for anything but regular data transfers.
Use the newly added prep helper to split the msghdr copy out from
the core function, to check for msg_control and msg_controllen
settings. If either is set, we return -EINVAL.
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This is in preparation for enabling the io_uring helpers for sendmsg
and recvmsg to first copy the header for validation before continuing
with the operation.
There should be no functional changes in this patch.
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Note that the sysctl write accessor functions guarantee that:
net->ipv4.sysctl_ip_prot_sock <= net->ipv4.ip_local_ports.range[0]
invariant is maintained, and as such the max() in selinux hooks is actually spurious.
ie. even though
if (snum < max(inet_prot_sock(sock_net(sk)), low) || snum > high) {
per logic is the same as
if ((snum < inet_prot_sock(sock_net(sk)) && snum < low) || snum > high) {
it is actually functionally equivalent to:
if (snum < low || snum > high) {
which is equivalent to:
if (snum < inet_prot_sock(sock_net(sk)) || snum < low || snum > high) {
even though the first clause is spurious.
But we want to hold on to it in case we ever want to change what what
inet_port_requires_bind_service() means (for example by changing
it from a, by default, [0..1024) range to some sort of set).
Test: builds, git 'grep inet_prot_sock' finds no other references
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Thomas Falcon says:
====================
ibmvnic: Harden device commands and queries
This patch series fixes some shortcomings with the current
VNIC device command implementation. The first patch fixes
the initialization of driver completion structures used
for device commands. Additionally, all waits for device
commands are bounded with a timeout in the event that the
device does not respond or becomes inoperable. Finally,
serialize queries to retain the integrity of device return
codes.
Changes in v2:
- included header comment for ibmvnic_wait_for_completion
- removed open-coded loop in patch 3/4, suggested by Jakub
- ibmvnic_wait_for_completion accepts timeout value in milliseconds
instead of jiffies
- timeout calculations cleaned up and completed before wait loop
- included missing mutex_destroy calls, suggested by Jakub
- included comment before mutex declaration
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Provide some serialization for device CRQ commands
and queries to ensure that the shared variable used for
storing return codes is properly synchronized.
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Create a wrapper for wait_for_completion calls with additional
driver checks to ensure that the driver does not wait on a
disabled device. In those cases or if the device does not respond
in an extended amount of time, this will allow the driver an
opportunity to recover.
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If we receive a notification that the device has been deactivated
or removed, force a completion of all waiting threads.
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix multiple calls to init_completion for device completion
structures. Instead, initialize them during device probe and
reinitialize them later as needed.
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It already existed in part of the function, but move it
to a higher level and use it consistently throughout.
Safe since sk is never written to.
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It cannot overlap with the local port range - ie. with autobind selectable
ports - and not with reserved ports.
Indeed 'ip_local_reserved_ports' isn't even a range, it's a (by default
empty) set.
Fixes: 4548b683b781 ("Introduce a sysctl that modifies the value of PROT_SOCK.")
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
seg_segment_reg() should be unreachable with task == current.
Rather than confusingly trying to make it work, just explicitly
disable this case.
(regset->get is used for current in the coredump code, but the ->set
interface is only used for ptrace, and you can't ptrace yourself.)
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
A double fault has a decent chance of being recoverable by killing
the offending thread. Use die() so that we at least try to recover.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The old x86_32 doublefault_fn() was old and crufty, and it did not
even try to recover. do_double_fault() is much nicer. Rewrite the
32-bit double fault code to sanitize CPU state and call
do_double_fault(). This is mostly an exercise i386 archaeology.
With this patch applied, 32-bit double faults get a real stack trace,
just like 64-bit double faults.
[ mingo: merged the patch to a later kernel base. ]
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
There are three problems with the current layout of the doublefault
stack and TSS. First, the TSS is only cacheline-aligned, which is
not enough -- if the hardware portion of the TSS (struct x86_hw_tss)
crosses a page boundary, horrible things happen [0]. Second, the
stack and TSS are global, so simultaneous double faults on different
CPUs will cause massive corruption. Third, the whole mechanism
won't work if user CR3 is loaded, resulting in a triple fault [1].
Let the doublefault stack and TSS share a page (which prevents the
TSS from spanning a page boundary), make it percpu, and move it into
cpu_entry_area. Teach the stack dump code about the doublefault
stack.
[0] Real hardware will read past the end of the page onto the next
*physical* page if a task switch happens. Virtual machines may
have any number of bugs, and I would consider it reasonable for
a VM to summarily kill the guest if it tries to task-switch to
a page-spanning TSS.
[1] Real hardware triple faults. At least some VMs seem to hang.
I'm not sure what's going on.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
doublefault.c now only contains 32-bit code. Rename it to
doublefault_32.c.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The 64-bit doublefault handler is much nicer than the 32-bit one.
As a first step toward unifying them, make the 64-bit handler
self-contained. This should have no effect no functional effect
except in the odd case of x86_64 with CONFIG_DOUBLEFAULT=n in which
case it will change the logging a bit.
This also gets rid of CONFIG_DOUBLEFAULT configurability on 64-bit
kernels. It didn't do anything useful -- CONFIG_DOUBLEFAULT=n
didn't actually disable doublefault handling on x86_64.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The DOUBLE_FAULT crash does INT $8, which is a decent approximation
of a double fault. This is useful for testing the double fault
handling. Use it like:
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
We used to test SYSENTER only through the vDSO. Test it directly
too, just in case.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The job of vmalloc_sync_all() is to help the lazy freeing of vmalloc()
ranges: before such vmap ranges are reused we make sure that they are
unmapped from every task's page tables.
This is really easy on pagetable setups where the kernel page tables
are shared between all tasks - this is the case on 32-bit kernels
with SHARED_KERNEL_PMD = 1.
But on !SHARED_KERNEL_PMD 32-bit kernels this involves iterating
over the pgd_list and clearing all pmd entries in the pgds that
are cleared in the init_mm.pgd, which is the reference pagetable
that the vmalloc() code uses.
In that context the current practice of vmalloc_sync_all() iterating
until FIX_ADDR_TOP is buggy:
for (address = VMALLOC_START & PMD_MASK;
address >= TASK_SIZE_MAX && address < FIXADDR_TOP;
address += PMD_SIZE) {
struct page *page;
Because iterating up to FIXADDR_TOP will involve a lot of non-vmalloc
address ranges:
VMALLOC -> PKMAP -> LDT -> CPU_ENTRY_AREA -> FIX_ADDR
This is mostly harmless for the FIX_ADDR and CPU_ENTRY_AREA ranges
that don't clear their pmds, but it's lethal for the LDT range,
which relies on having different mappings in different processes,
and 'synchronizing' them in the vmalloc sense corrupts those
pagetable entries (clearing them).
This got particularly prominent with PTI, which turns SHARED_KERNEL_PMD
off and makes this the dominant mapping mode on 32-bit.
To make LDT working again vmalloc_sync_all() must only iterate over
the volatile parts of the kernel address range that are identical
between all processes.
So the correct check in vmalloc_sync_all() is "address < VMALLOC_END"
to make sure the VMALLOC areas are synchronized and the LDT
mapping is not falsely overwritten.
The CPU_ENTRY_AREA and the FIXMAP area are no longer synced either,
but this is not really a proplem since their PMDs get established
during bootup and never change.
This change fixes the ldt_gdt selftest in my setup.
[ mingo: Fixed up the changelog to explain the logic and modified the
copying to only happen up until VMALLOC_END. ]
Reported-by: Borislav Petkov <bp@suse.de>
Tested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Cc: <stable@vger.kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: hpa@zytor.com
Fixes: 7757d607c6b3: ("x86/pti: Allow CONFIG_PAGE_TABLE_ISOLATION for x86_32")
Link: https://lkml.kernel.org/r/20191126111119.GA110513@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
After the following commit:
05b042a19443: ("x86/pti/32: Calculate the various PTI cpu_entry_area sizes correctly, make the CPU_ENTRY_AREA_PAGES assert precise")
'struct cpu_entry_area' has to be Kconfig invariant, so that we always
have a matching CPU_ENTRY_AREA_PAGES size.
This commit added a CONFIG_X86_IOPL_IOPERM dependency to tss_struct:
111e7b15cf10: ("x86/ioperm: Extend IOPL config to control ioperm() as well")
Which, if CONFIG_X86_IOPL_IOPERM is turned off, reduces the size of
cpu_entry_area by two pages, triggering the assert:
./include/linux/compiler.h:391:38: error: call to ‘__compiletime_assert_202’ declared with attribute error: BUILD_BUG_ON failed: (CPU_ENTRY_AREA_PAGES+1)*PAGE_SIZE != CPU_ENTRY_AREA_MAP_SIZE
Simplify the Kconfig dependencies and make cpu_entry_area constant
size on 32-bit kernels again.
Fixes: 05b042a19443: ("x86/pti/32: Calculate the various PTI cpu_entry_area sizes correctly, make the CPU_ENTRY_AREA_PAGES assert precise")
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The DTC v1.5.1 added references to (U)INT32_MAX.
This is no problem for user-space programs since <stdint.h> defines
(U)INT32_MAX along with (u)int32_t.
For the kernel space, libfdt_env.h needs to be adjusted before we
pull in the changes.
In the kernel, we usually use s/u32 instead of (u)int32_t for the
fixed-width types.
Accordingly, we already have S/U32_MAX for their max values.
So, we should not add (U)INT32_MAX to <linux/limits.h> any more.
Instead, add them to the in-kernel libfdt_env.h to compile the
latest libfdt.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
The Beurer GL50 evo uses a Cygnal-manufactured CD-on-a-chip that only
accepts a subset of SCSI commands, and supports neither audio commands
nor generic packet commands.
Actually sending those commands bring the device to an unrecoverable
state that causes the device to hang and reset.
To: Jens Axboe <axboe@kernel.dk>
Cc: linux-kernel@vger.kernel.org
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Diego Elio Pettenò <flameeyes@flameeyes.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Reading the TOC only works if the device can play audio, otherwise
these commands fail (and possibly bring the device to an unhealthy
state.)
Similarly, cdrom_mmc3_profile() should only be called if the device
supports generic packet commands.
To: Jens Axboe <axboe@kernel.dk>
Cc: linux-kernel@vger.kernel.org
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Diego Elio Pettenò <flameeyes@flameeyes.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
