summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-04-29irqchip: s3c24xx: add missing __init annotationsArnd Bergmann
The s3c24xx_init_intc and s3c2412_init_irq functions are only called at init time, and they call functions already marked __init, so they should be marked in the same way. This was reported as WARNING: vmlinux.o(.text+0x19e0b4): Section mismatch in reference from the function s3c2412_init_irq() to the function .init.text:s3c24xx_init_intc.constprop.8() The function s3c2412_init_irq() references the function __init s3c24xx_init_intc.constprop.8(). This is often because s3c2412_init_irq lacks a __init annotation or the annotation of s3c24xx_init_intc.constprop.8 is wrong. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Heiko Stuebner <heiko@sntech.de> Cc: Kukjin Kim <kgene.kim@samsung.com>
2013-04-29edac: sb_edac.c should not require prescence of IMC_DDRIO deviceLuck, Tony
The Sandy Bridge EDAC driver uses a register in the IMC_DDRIO CSR space to determine the type of DIMMs (registered or unregistered). But this device does not exist on some single socket Sandy Bridge servers. While the type of DIMMs is nice to know, it is not essential for this driver's other functions. So it seems harsh to have it refuse to load at all when it cannot find this device. Make the check for this device be optional. If it isn't present just report the memory type as "MEM_UNKNOWN". Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-29i7300_edac: Fix memory detection in single modeMauro Carvalho Chehab
When the machine is on single mode, only branch 0 channel 0 is valid. However, the code is not honouring it: [ 1952.639341] EDAC DEBUG: i7300_get_mc_regs: Memory controller operating on single mode ... [ 1952.639351] EDAC DEBUG: i7300_init_csrows: AMB-present CH0 = 0x1: [ 1952.639353] EDAC DEBUG: i7300_init_csrows: AMB-present CH1 = 0x0: [ 1952.639355] EDAC DEBUG: i7300_init_csrows: AMB-present CH2 = 0x0: [ 1952.639358] EDAC DEBUG: i7300_init_csrows: AMB-present CH3 = 0x0: ... [ 1952.639360] EDAC DEBUG: decode_mtr: MTR0 CH0: DIMMs are Present (mtr) [ 1952.639362] EDAC DEBUG: decode_mtr: WIDTH: x8 [ 1952.639363] EDAC DEBUG: decode_mtr: ELECTRICAL THROTTLING is enabled [ 1952.639364] EDAC DEBUG: decode_mtr: NUMBANK: 4 bank(s) [ 1952.639366] EDAC DEBUG: decode_mtr: NUMRANK: single [ 1952.639367] EDAC DEBUG: decode_mtr: NUMROW: 16,384 - 14 rows [ 1952.639368] EDAC DEBUG: decode_mtr: NUMCOL: 1,024 - 10 columns [ 1952.639370] EDAC DEBUG: decode_mtr: SIZE: 512 MB [ 1952.639371] EDAC DEBUG: decode_mtr: ECC code is 8-byte-over-32-byte SECDED+ code [ 1952.639373] EDAC DEBUG: decode_mtr: Scrub algorithm for x8 is on enhanced mode [ 1952.639374] EDAC DEBUG: decode_mtr: MTR0 CH1: DIMMs are Present (mtr) [ 1952.639376] EDAC DEBUG: decode_mtr: WIDTH: x8 [ 1952.639377] EDAC DEBUG: decode_mtr: ELECTRICAL THROTTLING is enabled [ 1952.639379] EDAC DEBUG: decode_mtr: NUMBANK: 4 bank(s) [ 1952.639380] EDAC DEBUG: decode_mtr: NUMRANK: single [ 1952.639381] EDAC DEBUG: decode_mtr: NUMROW: 16,384 - 14 rows [ 1952.639383] EDAC DEBUG: decode_mtr: NUMCOL: 1,024 - 10 columns [ 1952.639384] EDAC DEBUG: decode_mtr: SIZE: 512 MB [ 1952.639385] EDAC DEBUG: decode_mtr: ECC code is 8-byte-over-32-byte SECDED+ code [ 1952.639387] EDAC DEBUG: decode_mtr: Scrub algorithm for x8 is on enhanced mode ... [ 1952.639449] EDAC DEBUG: print_dimm_size: channel 0 | channel 1 | channel 2 | channel 3 | [ 1952.639451] EDAC DEBUG: print_dimm_size: ------------------------------------------------------------- [ 1952.639453] EDAC DEBUG: print_dimm_size: csrow/SLOT 0 512 MB | 512 MB | 0 MB | 0 MB | [ 1952.639456] EDAC DEBUG: print_dimm_size: csrow/SLOT 1 0 MB | 0 MB | 0 MB | 0 MB | [ 1952.639458] EDAC DEBUG: print_dimm_size: csrow/SLOT 2 0 MB | 0 MB | 0 MB | 0 MB | [ 1952.639460] EDAC DEBUG: print_dimm_size: csrow/SLOT 3 0 MB | 0 MB | 0 MB | 0 MB | [ 1952.639462] EDAC DEBUG: print_dimm_size: csrow/SLOT 4 0 MB | 0 MB | 0 MB | 0 MB | [ 1952.639464] EDAC DEBUG: print_dimm_size: csrow/SLOT 5 0 MB | 0 MB | 0 MB | 0 MB | [ 1952.639466] EDAC DEBUG: print_dimm_size: csrow/SLOT 6 0 MB | 0 MB | 0 MB | 0 MB | [ 1952.639468] EDAC DEBUG: print_dimm_size: csrow/SLOT 7 0 MB | 0 MB | 0 MB | 0 MB | [ 1952.639470] EDAC DEBUG: print_dimm_size: ------------------------------------------------------------- Instead of detecting a single memory at channel 0, it is showing twice the memory. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-29mm: Convert print_symbol to %pSRJoe Perches
Use the new vsprintf extension to avoid any possible message interleaving. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Christoph Lameter <cl@linux.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-04-29gfs2: Convert print_symbol to %pSRJoe Perches
Use the new vsprintf extension to avoid any possible message interleaving. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-04-29m32r: Convert print_symbol to %pSRJoe Perches
Use the new vsprintf extension to avoid any possible message interleaving. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-04-29iostats.txt: add easy-to-find description for field 6David P Hilton
iostats.txt has a merged description of fields 2 and 6, but it's not obvious. This patch adds a field 6, pointing to the merged description of field 6 in field 2. Signed-off-by: David Hilton <david.hilton.p@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-04-29jbd: use kmem_cache_zalloc for allocating journal headZheng Liu
This commit tries to use kmem_cache_zalloc instead of kmem_cache_alloc/ memset when a new journal head is alloctated. Signed-off-by: Zheng Liu <wenqing.lz@taobao.com> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Jan Kara <jack@suse.cz>
2013-04-29ALSA: asihpi: add format support check in snd_card_asihpi_capture_formatsEldad Zack
Some Asihpi formats are not supported or invalid, and their mapping to ALSA format is set to -1. Before performing the format conversion into ALSA bitwise formats, add a consistency check for the requested format, as done in snd_card_asihpi_playback_formats(). Compile tested only. Signed-off-by: Eldad Zack <eldad@fogrefinery.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-04-29ALSA: pcm_format_to_bits strong-typed conversionEldad Zack
Add a function to handle conversion from snd_pcm_format_t to bitwise with proper typing. Change such conversions to use this function and silence sparse warnings. Signed-off-by: Eldad Zack <eldad@fogrefinery.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-04-29ALSA: compress: fix the states to check for allowing readVinod Koul
for reading compressed data, we need to allow when we are paused, draining or stopped. Signed-off-by: Vinod Koul <vinod.koul@intel.com> Cc: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Cc: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-04-29nohz: Protect smp_processor_id() in tick_nohz_task_switch()Li Zhong
I saw following error when testing the latest nohz code on Power: [ 85.295384] BUG: using smp_processor_id() in preemptible [00000000] code: rsyslogd/3493 [ 85.295396] caller is .tick_nohz_task_switch+0x1c/0xb8 [ 85.295402] Call Trace: [ 85.295408] [c0000001fababab0] [c000000000012dc4] .show_stack+0x110/0x25c (unreliable) [ 85.295420] [c0000001fababba0] [c0000000007c4b54] .dump_stack+0x20/0x30 [ 85.295430] [c0000001fababc10] [c00000000044eb74] .debug_smp_processor_id+0xf4/0x124 [ 85.295438] [c0000001fababca0] [c0000000000d7594] .tick_nohz_task_switch+0x1c/0xb8 [ 85.295447] [c0000001fababd20] [c0000000000b9748] .finish_task_switch+0x13c/0x160 [ 85.295455] [c0000001fababdb0] [c0000000000bbe50] .schedule_tail+0x50/0x124 [ 85.295463] [c0000001fababe30] [c000000000009dc8] .ret_from_fork+0x4/0x54 The code below moves the test into local_irq_save/restore section to avoid the above complaint. Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1367119558.6391.34.camel@ThinkPad-T5421.cn.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-04-29ALSA: hda - Move Thinkpad X220 to use auto parserDavid Henningsson
This enables better volume controls than the current model parser. Also, because the original quirk for X220 was added to fix docking station support, add the TP410 fixup instead. Reported-by: Willian Jon McCann <william.jon.mccann@gmail.com> Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-04-29ALSA: USB: adjust for changed 3.8 USB APIClemens Ladisch
The recent changes in the USB API ("implement new semantics for URB_ISO_ASAP") made the former meaning of the URB_ISO_ASAP flag the default, and changed this flag to mean that URBs can be delayed. This is not the behaviour wanted by any of the audio drivers because it leads to discontinuous playback with very small period sizes. Therefore, our URBs need to be submitted without this flag. Reported-by: Joe Rayhawk <jrayhawk@fairlystable.org> Cc: <stable@vger.kernel.org> # 3.8 only Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-04-29HID: Add PID for Japanese version of NE4K keyboardAdam Jiang
This patche adds PID of Japanese Natual Ergonomic Keyboard 4000. HID NE4K driver depends on this PID for determining its quirks. F14-F18 keys would not work without the patch. Signed-off-by: Adam Jiang <jiang.adam@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-04-29drm/exynos: Don't blend mixer layer 0Sean Paul
This patch disables blending the mixer's layer 0 onto the background (solid color). It doesn't make sense to blend this layer by default, and causes color distortion if the layer is used for arbitrary content. Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-04-29drm/exynos: Remove unnecessary braces in exynos_hdmi.cSachin Kamat
Silences the following checkpatch warning: WARNING: braces {} are not necessary for any arm of this statement Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-04-29drm/exynos: Select VIDEOMODE_HELPERS for FIMDSachin Kamat
FIMD also requires video mode helper APIs. Without this patch we get the following build error: drivers/gpu/drm/exynos/exynos_drm_fimd.c:895: undefined reference to `of_get_fb_videomode' make: *** [vmlinux] Error 1 Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-04-29drm/exynos: do not use generic flags to dumbInki Dae
This patch removes the use of dumb flags from driver. As Dave pointed out, the dumb flags are not driver specific so this should be removed from driver. Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2013-04-29drm/exynos: added ipp device registration to drm driverSeung-Woo Kim
This patch added exynos-drm-ipp platform device registration to the exynos drm driver. When DT is enabled, platform devices need to be registered within the driver code. This patch fits the requirement of both DT and Non DT based drm drivers. Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Donghwa Lee <dh09.lee@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-04-29exynos/drm: hdmi: cleanup for hdmi common device registrationSeung-Woo Kim
The hdmi common device registration function does not need extern definition and for error case and unregister case, exynos_drm_hdmi_pdev should be cleared. Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-04-29drm/exynos: fix wrong return check for platform_device_register_simpleSeung-Woo Kim
platform_device_register_simple() never returns NULL, but IS_ERR_OR_NULL macro is used for checking return value in exynos drm driver. Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-04-29drm/exynos: add device tree support for fimc ipp driverSylwester Nawrocki
This patch adds OF initialization support for the FIMC driver. The binding documentation can be found at Documentation/devicetree/ bindings/media/samsung-fimc.txt. The syscon regmap interface is used to serialize access to the shared CAMBLK registers from within the V4L2 FIMC-IS and the DRM FIMC drivers. The DRM driver uses this interface for setting up the FIFO data link between FIMD and FIMC IP blocks, while the V4L2 one for setting up a data link between the camera ISP and FIMC for camera capture. The CAMBLK registers are not accessed any more through a statically mapped IO. Synchronized access to these registers is required for simultaneous operation of the camera ISP and the DRM IPP on Exynos4x12. The driver data and driver_ids static data structures are removed since Exynos4 is going to be a dt-only platform and there is currently no board file in mainline that defines platform data for the FIMC IPP, i.e. uses it. Camera input signal polarities are not currently parsed from the device tree. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-04-29drm/exynos: rework fimc clocks handlingSylwester Nawrocki
The clocks handling is refactored and a "mux" clock handling is added to account for changes in the clocks driver. After switching to the common clock framework the sclk_fimc clock is now split into two clocks: a gate and a mux clock. In order to retain the exisiting functionality two additional consumer clocks are passed to the driver from device tree: "mux" and "parent". Then the driver sets "parent" clock as a parent clock of the "mux" clock. These two additional clocks are optional, and should go away when there is a standard way of setting up parent clocks on DT platforms. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-04-29drm/exynos: remove redundant devm_kfree()Sylwester Nawrocki
There is no need for explicit calls of devm_kfree(), as the allocated memory will be freed during driver's detach. Remove the redundant devm_kfree() calls from probe() and remove() callbacks. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-04-29drm/exynos: enable FIMD clocksVikas Sajjan
Common Clock Framework introduced the need to prepare clocks before enabling them, otherwise clk_enable() fails. This patch adds clk_prepare_enable and clk_disable_unprepare() calls to the driver. This patch also removes clk_disable() from fimd_remove() as it will be done by pm_runtime_put_sync. Signed-off-by: Vikas Sajjan <vikas.sajjan@linaro.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-04-29Revert "drm/exynos: prepare FIMD clocks"Inki Dae
This reverts commit b4e3a3e844a0e33cf106a1c9f27ff93340c37640.
2013-04-28ARM: KVM: iterate over all CPUs for CPU compatibility checkAndre Przywara
kvm_target_cpus() checks the compatibility of the used CPU with KVM, which is currently limited to ARM Cortex-A15 cores. However by calling it only once on any random CPU it assumes that all cores are the same, which is not necessarily the case (for example in Big.Little). [ I cut some of the commit message and changed the formatting of the code slightly to pass checkpatch and look more like the rest of the kvm/arm init code - Christoffer ] Signed-off-by: Andre Przywara <andre.przywara@linaro.org> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
2013-04-28KVM: ARM: Fix spelling in error messageChristoffer Dall
s/unkown/unknown/ Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
2013-04-28ARM: KVM: define KVM_ARM_MAX_VCPUS unconditionallyArnd Bergmann
The CONFIG_KVM_ARM_MAX_VCPUS symbol is needed in order to build the kernel/context_tracking.c code, which includes the vgic data structures implictly through the kvm headers. Definining the symbol to zero on builds without KVM resolves this build error: In file included from include/linux/kvm_host.h:33:0, from kernel/context_tracking.c:18: arch/arm/include/asm/kvm_host.h:28:23: warning: "CONFIG_KVM_ARM_MAX_VCPUS" is not defined [-Wundef] #define KVM_MAX_VCPUS CONFIG_KVM_ARM_MAX_VCPUS ^ arch/arm/include/asm/kvm_vgic.h:34:24: note: in expansion of macro 'KVM_MAX_VCPUS' #define VGIC_MAX_CPUS KVM_MAX_VCPUS ^ arch/arm/include/asm/kvm_vgic.h:38:6: note: in expansion of macro 'VGIC_MAX_CPUS' #if (VGIC_MAX_CPUS > 8) ^ In file included from arch/arm/include/asm/kvm_host.h:41:0, from include/linux/kvm_host.h:33, from kernel/context_tracking.c:18: arch/arm/include/asm/kvm_vgic.h:59:11: error: 'CONFIG_KVM_ARM_MAX_VCPUS' undeclared here (not in a function) } percpu[VGIC_MAX_CPUS]; ^ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Christoffer Dall <cdall@cs.columbia.edu> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
2013-04-28KVM: ARM: Fix API documentation for ONE_REG encodingChristoffer Dall
Unless I'm mistaken, the size field was encoded 4 bits off and a wrong value was used for 64-bit FP registers. Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
2013-04-28ARM: KVM: promote vfp_host pointer to generic host cpu contextMarc Zyngier
We use the vfp_host pointer to store the host VFP context, should the guest start using VFP itself. Actually, we can use this pointer in a more generic way to store CPU speficic data, and arm64 is using it to dump the whole host state before switching to the guest. Simply rename the vfp_host field to host_cpu_context, and the corresponding type to kvm_cpu_context_t. No change in functionnality. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
2013-04-28ARM: KVM: add architecture specific hook for capabilitiesMarc Zyngier
Most of the capabilities are common to both arm and arm64, but we still need to handle the exceptions. Introduce kvm_arch_dev_ioctl_check_extension, which both architectures implement (in the 32bit case, it just returns 0). Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
2013-04-28ARM: KVM: perform HYP initilization for hotplugged CPUsMarc Zyngier
Now that we have the necessary infrastructure to boot a hotplugged CPU at any point in time, wire a CPU notifier that will perform the HYP init for the incoming CPU. Note that this depends on the platform code and/or firmware to boot the incoming CPU with HYP mode enabled and return to the kernel by following the normal boot path (HYP stub installed). Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
2013-04-28ARM: KVM: switch to a dual-step HYP init codeMarc Zyngier
Our HYP init code suffers from two major design issues: - it cannot support CPU hotplug, as we tear down the idmap very early - it cannot perform a TLB invalidation when switching from init to runtime mappings, as pages are manipulated from PL1 exclusively The hotplug problem mandates that we keep two sets of page tables (boot and runtime). The TLB problem mandates that we're able to transition from one PGD to another while in HYP, invalidating the TLBs in the process. To be able to do this, we need to share a page between the two page tables. A page that will have the same VA in both configurations. All we need is a VA that has the following properties: - This VA can't be used to represent a kernel mapping. - This VA will not conflict with the physical address of the kernel text The vectors page seems to satisfy this requirement: - The kernel never maps anything else there - The kernel text being copied at the beginning of the physical memory, it is unlikely to use the last 64kB (I doubt we'll ever support KVM on a system with something like 4MB of RAM, but patches are very welcome). Let's call this VA the trampoline VA. Now, we map our init page at 3 locations: - idmap in the boot pgd - trampoline VA in the boot pgd - trampoline VA in the runtime pgd The init scenario is now the following: - We jump in HYP with four parameters: boot HYP pgd, runtime HYP pgd, runtime stack, runtime vectors - Enable the MMU with the boot pgd - Jump to a target into the trampoline page (remember, this is the same physical page!) - Now switch to the runtime pgd (same VA, and still the same physical page!) - Invalidate TLBs - Set stack and vectors - Profit! (or eret, if you only care about the code). Note that we keep the boot mapping permanently (it is not strictly an idmap anymore) to allow for CPU hotplug in later patches. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
2013-04-28ARM: KVM: rework HYP page table freeingMarc Zyngier
There is no point in freeing HYP page tables differently from Stage-2. They now have the same requirements, and should be dealt with the same way. Promote unmap_stage2_range to be The One True Way, and get rid of a number of nasty bugs in the process (good thing we never actually called free_hyp_pmds before...). Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
2013-04-28ARM: KVM: enforce maximum size for identity mapped codeMarc Zyngier
We're about to move to an init procedure where we rely on the fact that the init code fits in a single page. Make sure we align the idmap text on a vector alignment, and that the code is not bigger than a single page. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
2013-04-28ARM: KVM: move to a KVM provided HYP idmapMarc Zyngier
After the HYP page table rework, it is pretty easy to let the KVM code provide its own idmap, rather than expecting the kernel to provide it. It takes actually less code to do so. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
2013-04-28ARM: KVM: fix HYP mapping limitations around zeroMarc Zyngier
The current code for creating HYP mapping doesn't like to wrap around zero, which prevents from mapping anything into the last page of the virtual address space. It doesn't take much effort to remove this limitation, making the code more consistent with the rest of the kernel in the process. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
2013-04-28ARM: KVM: simplify HYP mapping populationMarc Zyngier
The way we populate HYP mappings is a bit convoluted, to say the least. Passing a pointer around to keep track of the current PFN is quite odd, and we end-up having two different PTE accessors for no good reason. Simplify the whole thing by unifying the two PTE accessors, passing a pgprot_t around, and moving the various validity checks to the upper layers. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
2013-04-28ARM: KVM: arch_timer: use symbolic constantsMark Rutland
In clocksource/arm_arch_timer.h we define useful symbolic constants. Let's use them to make the KVM arch_timer code clearer. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Christoffer Dall <cdall@cs.columbia.edu> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
2013-04-28ARM: KVM: add support for minimal host vs guest profilingMarc Zyngier
In order to be able to correctly profile what is happening on the host, we need to be able to identify when we're running on the guest, and log these events differently. Perf offers a simple way to register callbacks into KVM. Mimic what x86 does and enjoy being able to profile your KVM host. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
2013-04-29virtio-net: fill only rx queues which are being usedSasha Levin
Due to MQ support we may allocate a whole bunch of rx queues but never use them. With this patch we'll safe the space used by the receive buffers until they are actually in use: sh-4.2# free -h total used free shared buffers cached Mem: 490M 35M 455M 0B 0B 4.1M -/+ buffers/cache: 31M 459M Swap: 0B 0B 0B sh-4.2# ethtool -L eth0 combined 8 sh-4.2# free -h total used free shared buffers cached Mem: 490M 162M 327M 0B 0B 4.1M -/+ buffers/cache: 158M 331M Swap: 0B 0B 0B Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-04-29f2fs: check truncation of mapping after lock_pageJaegeuk Kim
We call lock_page when we need to update a page after readpage. Between grab and lock page, the page can be truncated by other thread. So, we should check the page after lock_page whether it was truncated or not. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-04-29f2fs: enhance alloc_nid and build_free_nids flowsJaegeuk Kim
In order to avoid build_free_nid lock contention, let's change the order of function calls as follows. At first, check whether there is enough free nids. - If available, just get a free nid with spin_lock without any overhead. - Otherwise, conduct build_free_nids. : scan nat pages, journal nat entries, and nat cache entries. We should consider carefullly not to serve free nids intermediately made by build_free_nids. We can get stable free nids only after build_free_nids is done. Reviewed-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-04-29modpost: fix unwanted VMLINUX_SYMBOL_STR expansionJames Hogan
Commit a4b6a77b77ba4f526392612c2365797fab956014 ("module: fix symbol versioning with symbol prefixes") broke the MODVERSIONS loading of any module using memcmp (e.g. ipv6) on x86_32, as it's defined to __builtin_memcmp which is expanded by VMLINUX_SYMBOL_STR. Use __VMLINUX_SYMBOL_STR instead which doesn't expand the argument. Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: H. Peter Anvin <hpa@zytor.com> Tested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: <stable@vger.kernel.org> # 3.9
2013-04-29f2fs: add a tracepoint on f2fs_new_inodeJaegeuk Kim
This can help when debugging the free nid allocation flows. Reviewed-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-04-28Linux 3.9v3.9Linus Torvalds
2013-04-28Merge branch 'clksrc/cleanup' into next/multiplatformOlof Johansson
Merge in the clksrc/cleanup branch to avoid a silly merge conflict. For some reason two versions of the same patch were merged in two branches. Resolve this here to avoid merge conflicts down the road, since it can be confusing to tell which version is the one to keep. * clksrc/cleanup: clocksource: make CLOCKSOURCE_OF_DECLARE type safe Signed-off-by: Olof Johansson <olof@lixom.net> Conflicts: include/linux/clocksource.h
2013-04-29Merge branch 'pm-cpufreq'Rafael J. Wysocki
* pm-cpufreq: cpufreq: Revert incorrect commit 5800043
generated by cgit (git 2.34.1) at 2025-09-22 16:35:06 +0000