| Age | Commit message (Collapse) | Author |
|---|
|
If track_pfn_copy() fails, we already added the dst VMA to the maple
tree. As fork() fails, we'll cleanup the maple tree, and stumble over
the dst VMA for which we neither performed any reservation nor copied
any page tables.
Consequently untrack_pfn() will see VM_PAT and try obtaining the
PAT information from the page table -- which fails because the page
table was not copied.
The easiest fix would be to simply clear the VM_PAT flag of the dst VMA
if track_pfn_copy() fails. However, the whole thing is about "simply"
clearing the VM_PAT flag is shaky as well: if we passed track_pfn_copy()
and performed a reservation, but copying the page tables fails, we'll
simply clear the VM_PAT flag, not properly undoing the reservation ...
which is also wrong.
So let's fix it properly: set the VM_PAT flag only if the reservation
succeeded (leaving it clear initially), and undo the reservation if
anything goes wrong while copying the page tables: clearing the VM_PAT
flag after undoing the reservation.
Note that any copied page table entries will get zapped when the VMA will
get removed later, after copy_page_range() succeeded; as VM_PAT is not set
then, we won't try cleaning VM_PAT up once more and untrack_pfn() will be
happy. Note that leaving these page tables in place without a reservation
is not a problem, as we are aborting fork(); this process will never run.
A reproducer can trigger this usually at the first try:
https://gitlab.com/davidhildenbrand/scratchspace/-/raw/main/reproducers/pat_fork.c
WARNING: CPU: 26 PID: 11650 at arch/x86/mm/pat/memtype.c:983 get_pat_info+0xf6/0x110
Modules linked in: ...
CPU: 26 UID: 0 PID: 11650 Comm: repro3 Not tainted 6.12.0-rc5+ #92
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014
RIP: 0010:get_pat_info+0xf6/0x110
...
Call Trace:
<TASK>
...
untrack_pfn+0x52/0x110
unmap_single_vma+0xa6/0xe0
unmap_vmas+0x105/0x1f0
exit_mmap+0xf6/0x460
__mmput+0x4b/0x120
copy_process+0x1bf6/0x2aa0
kernel_clone+0xab/0x440
__do_sys_clone+0x66/0x90
do_syscall_64+0x95/0x180
Likely this case was missed in:
d155df53f310 ("x86/mm/pat: clear VM_PAT if copy_p4d_range failed")
... and instead of undoing the reservation we simply cleared the VM_PAT flag.
Keep the documentation of these functions in include/linux/pgtable.h,
one place is more than sufficient -- we should clean that up for the other
functions like track_pfn_remap/untrack_pfn separately.
Fixes: d155df53f310 ("x86/mm/pat: clear VM_PAT if copy_p4d_range failed")
Fixes: 2ab640379a0a ("x86: PAT: hooks in generic vm code to help archs to track pfnmap regions - v3")
Reported-by: xingwei lee <xrivendell7@gmail.com>
Reported-by: yuxin wang <wang1315768607@163.com>
Reported-by: Marius Fleischer <fleischermarius@gmail.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/20250321112323.153741-1-david@redhat.com
Closes: https://lore.kernel.org/lkml/CABOYnLx_dnqzpCW99G81DmOr+2UzdmZMk=T3uxwNxwz+R1RAwg@mail.gmail.com/
Closes: https://lore.kernel.org/lkml/CAJg=8jwijTP5fre8woS4JVJQ8iUA6v+iNcsOgtj9Zfpc3obDOQ@mail.gmail.com/
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- cleanup: remove an used function
- add support for a XenServer specific virtual PCI device
- fix the handling of a sparse Xen hypervisor symbol table
- avoid warnings when building the kernel with gcc 15
- fix use of devices behind a VMD bridge when running as a Xen PV dom0
* tag 'for-linus-6.15-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
PCI/MSI: Convert pci_msi_ignore_mask to per MSI domain flag
PCI: vmd: Disable MSI remapping bypass under Xen
xen/pci: Do not register devices with segments >= 0x10000
xen/pciback: Remove unused pcistub_get_pci_dev
xenfs/xensyms: respect hypervisor's "next" indication
xen/mcelog: Add __nonstring annotations for unterminated strings
xen: Add support for XenServer 6.1 platform device
|
|
Pull kvm updates from Paolo Bonzini:
"ARM:
- Nested virtualization support for VGICv3, giving the nested
hypervisor control of the VGIC hardware when running an L2 VM
- Removal of 'late' nested virtualization feature register masking,
making the supported feature set directly visible to userspace
- Support for emulating FEAT_PMUv3 on Apple silicon, taking advantage
of an IMPLEMENTATION DEFINED trap that covers all PMUv3 registers
- Paravirtual interface for discovering the set of CPU
implementations where a VM may run, addressing a longstanding issue
of guest CPU errata awareness in big-little systems and
cross-implementation VM migration
- Userspace control of the registers responsible for identifying a
particular CPU implementation (MIDR_EL1, REVIDR_EL1, AIDR_EL1),
allowing VMs to be migrated cross-implementation
- pKVM updates, including support for tracking stage-2 page table
allocations in the protected hypervisor in the 'SecPageTable' stat
- Fixes to vPMU, ensuring that userspace updates to the vPMU after
KVM_RUN are reflected into the backing perf events
LoongArch:
- Remove unnecessary header include path
- Assume constant PGD during VM context switch
- Add perf events support for guest VM
RISC-V:
- Disable the kernel perf counter during configure
- KVM selftests improvements for PMU
- Fix warning at the time of KVM module removal
x86:
- Add support for aging of SPTEs without holding mmu_lock.
Not taking mmu_lock allows multiple aging actions to run in
parallel, and more importantly avoids stalling vCPUs. This includes
an implementation of per-rmap-entry locking; aging the gfn is done
with only a per-rmap single-bin spinlock taken, whereas locking an
rmap for write requires taking both the per-rmap spinlock and the
mmu_lock.
Note that this decreases slightly the accuracy of accessed-page
information, because changes to the SPTE outside aging might not
use atomic operations even if they could race against a clear of
the Accessed bit.
This is deliberate because KVM and mm/ tolerate false
positives/negatives for accessed information, and testing has shown
that reducing the latency of aging is far more beneficial to
overall system performance than providing "perfect" young/old
information.
- Defer runtime CPUID updates until KVM emulates a CPUID instruction,
to coalesce updates when multiple pieces of vCPU state are
changing, e.g. as part of a nested transition
- Fix a variety of nested emulation bugs, and add VMX support for
synthesizing nested VM-Exit on interception (instead of injecting
#UD into L2)
- Drop "support" for async page faults for protected guests that do
not set SEND_ALWAYS (i.e. that only want async page faults at CPL3)
- Bring a bit of sanity to x86's VM teardown code, which has
accumulated a lot of cruft over the years. Particularly, destroy
vCPUs before the MMU, despite the latter being a VM-wide operation
- Add common secure TSC infrastructure for use within SNP and in the
future TDX
- Block KVM_CAP_SYNC_REGS if guest state is protected. It does not
make sense to use the capability if the relevant registers are not
available for reading or writing
- Don't take kvm->lock when iterating over vCPUs in the suspend
notifier to fix a largely theoretical deadlock
- Use the vCPU's actual Xen PV clock information when starting the
Xen timer, as the cached state in arch.hv_clock can be stale/bogus
- Fix a bug where KVM could bleed PVCLOCK_GUEST_STOPPED across
different PV clocks; restrict PVCLOCK_GUEST_STOPPED to kvmclock, as
KVM's suspend notifier only accounts for kvmclock, and there's no
evidence that the flag is actually supported by Xen guests
- Clean up the per-vCPU "cache" of its reference pvclock, and instead
only track the vCPU's TSC scaling (multipler+shift) metadata (which
is moderately expensive to compute, and rarely changes for modern
setups)
- Don't write to the Xen hypercall page on MSR writes that are
initiated by the host (userspace or KVM) to fix a class of bugs
where KVM can write to guest memory at unexpected times, e.g.
during vCPU creation if userspace has set the Xen hypercall MSR
index to collide with an MSR that KVM emulates
- Restrict the Xen hypercall MSR index to the unofficial synthetic
range to reduce the set of possible collisions with MSRs that are
emulated by KVM (collisions can still happen as KVM emulates
Hyper-V MSRs, which also reside in the synthetic range)
- Clean up and optimize KVM's handling of Xen MSR writes and
xen_hvm_config
- Update Xen TSC leaves during CPUID emulation instead of modifying
the CPUID entries when updating PV clocks; there is no guarantee PV
clocks will be updated between TSC frequency changes and CPUID
emulation, and guest reads of the TSC leaves should be rare, i.e.
are not a hot path
x86 (Intel):
- Fix a bug where KVM unnecessarily reads XFD_ERR from hardware and
thus modifies the vCPU's XFD_ERR on a #NM due to CR0.TS=1
- Pass XFD_ERR as the payload when injecting #NM, as a preparatory
step for upcoming FRED virtualization support
- Decouple the EPT entry RWX protection bit macros from the EPT
Violation bits, both as a general cleanup and in anticipation of
adding support for emulating Mode-Based Execution Control (MBEC)
- Reject KVM_RUN if userspace manages to gain control and stuff
invalid guest state while KVM is in the middle of emulating nested
VM-Enter
- Add a macro to handle KVM's sanity checks on entry/exit VMCS
control pairs in anticipation of adding sanity checks for secondary
exit controls (the primary field is out of bits)
x86 (AMD):
- Ensure the PSP driver is initialized when both the PSP and KVM
modules are built-in (the initcall framework doesn't handle
dependencies)
- Use long-term pins when registering encrypted memory regions, so
that the pages are migrated out of MIGRATE_CMA/ZONE_MOVABLE and
don't lead to excessive fragmentation
- Add macros and helpers for setting GHCB return/error codes
- Add support for Idle HLT interception, which elides interception if
the vCPU has a pending, unmasked virtual IRQ when HLT is executed
- Fix a bug in INVPCID emulation where KVM fails to check for a
non-canonical address
- Don't attempt VMRUN for SEV-ES+ guests if the vCPU's VMSA is
invalid, e.g. because the vCPU was "destroyed" via SNP's AP
Creation hypercall
- Reject SNP AP Creation if the requested SEV features for the vCPU
don't match the VM's configured set of features
Selftests:
- Fix again the Intel PMU counters test; add a data load and do
CLFLUSH{OPT} on the data instead of executing code. The theory is
that modern Intel CPUs have learned new code prefetching tricks
that bypass the PMU counters
- Fix a flaw in the Intel PMU counters test where it asserts that an
event is counting correctly without actually knowing what the event
counts on the underlying hardware
- Fix a variety of flaws, bugs, and false failures/passes
dirty_log_test, and improve its coverage by collecting all dirty
entries on each iteration
- Fix a few minor bugs related to handling of stats FDs
- Add infrastructure to make vCPU and VM stats FDs available to tests
by default (open the FDs during VM/vCPU creation)
- Relax an assertion on the number of HLT exits in the xAPIC IPI test
when running on a CPU that supports AMD's Idle HLT (which elides
interception of HLT if a virtual IRQ is pending and unmasked)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (216 commits)
RISC-V: KVM: Optimize comments in kvm_riscv_vcpu_isa_disable_allowed
RISC-V: KVM: Teardown riscv specific bits after kvm_exit
LoongArch: KVM: Register perf callbacks for guest
LoongArch: KVM: Implement arch-specific functions for guest perf
LoongArch: KVM: Add stub for kvm_arch_vcpu_preempted_in_kernel()
LoongArch: KVM: Remove PGD saving during VM context switch
LoongArch: KVM: Remove unnecessary header include path
KVM: arm64: Tear down vGIC on failed vCPU creation
KVM: arm64: PMU: Reload when resetting
KVM: arm64: PMU: Reload when user modifies registers
KVM: arm64: PMU: Fix SET_ONE_REG for vPMC regs
KVM: arm64: PMU: Assume PMU presence in pmu-emul.c
KVM: arm64: PMU: Set raw values from user to PM{C,I}NTEN{SET,CLR}, PMOVS{SET,CLR}
KVM: arm64: Create each pKVM hyp vcpu after its corresponding host vcpu
KVM: arm64: Factor out pKVM hyp vcpu creation to separate function
KVM: arm64: Initialize HCRX_EL2 traps in pKVM
KVM: arm64: Factor out setting HCRX_EL2 traps into separate function
KVM: x86: block KVM_CAP_SYNC_REGS if guest state is protected
KVM: x86: Add infrastructure for secure TSC
KVM: x86: Push down setting vcpu.arch.user_set_tsc
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k updates from Geert Uytterhoeven:
- misc fixes and improvements
- defconfig updates
* tag 'm68k-for-v6.15-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: defconfig: Update defconfigs for v6.14-rc1
m68k: setup: Remove size argument when calling strscpy()
m68k: sun3: Fix DEBUG_MMU_EMU build
m68k: sun3: Use str_read_write() helper in mmu_emu_handle_fault()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS update from Borislav Petkov:
- A cleanup to the MCE notification machinery
* tag 'ras_core_for_v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce/inject: Remove call to mce_notify_irq()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
core:
- Add support for skb TX SND/COMPLETION timestamping
- hci_core: Enable buffer flow control for SCO/eSCO
- coredump: Log devcd dumps into the monitor
drivers:
- btusb: Add 2 HWIDs for MT7922
- btusb: Fix regression in the initialization of fake Bluetooth controllers
- btusb: Add 14 USB device IDs for Qualcomm WCN785x
- btintel: Add support for Intel Scorpius Peak
- btintel: Add support to configure TX power
- btintel: Add DSBR support for ScP
- btintel_pcie: Add device id of Whale Peak
- btintel_pcie: Setup buffers for firmware traces
- btintel_pcie: Read hardware exception data
- btintel_pcie: Add support for device coredump
- btintel_pcie: Trigger device coredump on hardware exception
- btnxpuart: Support for controller wakeup gpio config
- btnxpuart: Add support to set BD address
- btnxpuart: Add correct bootloader error codes
- btnxpuart: Handle bootloader error during cmd5 and cmd7
- btnxpuart: Fix kernel panic during FW release
- qca: add WCN3950 support
- hci_qca: use the power sequencer for wcn6750
- btmtksdio: Prevent enabling interrupts after IRQ handler removal
* tag 'for-net-next-2025-03-25' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (53 commits)
Bluetooth: MGMT: Add LL Privacy Setting
Bluetooth: hci_event: Fix handling of HCI_EV_LE_DIRECT_ADV_REPORT
Bluetooth: btnxpuart: Fix kernel panic during FW release
Bluetooth: btnxpuart: Handle bootloader error during cmd5 and cmd7
Bluetooth: btnxpuart: Add correct bootloader error codes
t blameBluetooth: btintel: Fix leading white space
Bluetooth: btintel: Add support to configure TX power
Bluetooth: btmtksdio: Prevent enabling interrupts after IRQ handler removal
Bluetooth: btmtk: Remove the resetting step before downloading the fw
Bluetooth: SCO: add TX timestamping
Bluetooth: L2CAP: add TX timestamping
Bluetooth: ISO: add TX timestamping
Bluetooth: add support for skb TX SND/COMPLETION timestamping
net-timestamp: COMPLETION timestamp on packet tx completion
HCI: coredump: Log devcd dumps into the monitor
Bluetooth: HCI: Add definition of hci_rp_remote_name_req_cancel
Bluetooth: hci_vhci: Mark Sync Flow Control as supported
Bluetooth: hci_core: Enable buffer flow control for SCO/eSCO
Bluetooth: btintel_pci: Fix build warning
Bluetooth: btintel_pcie: Trigger device coredump on hardware exception
...
====================
Link: https://patch.msgid.link/20250325192925.2497890-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The hardware only supports L4 checksum offload for TCP/UDP/SCTP protocol.
There was a bug to set Tx checksum flag for the other protocol that results
in Tx ring hang. Fix to compute software checksum for these packets.
Fixes: 3403960cdf86 ("net: wangxun: libwx add tx offload functions")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20250324103235.823096-2-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The length of skb header was incorrectly calculated when transmit a tunnel
packet with outer IPv6 extension header, or a IP over IP packet which has
inner IPv6 header. Thus the correct Tx context descriptor cannot be
composed, resulting in Tx ring hang.
Fixes: 3403960cdf86 ("net: wangxun: libwx add tx offload functions")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20250324103235.823096-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC updates from Borislav Petkov:
- Add infrastructure support to EDAC in order to be able to register
memory scrubbing RAS functionality with the kernel and expose sysfs
nodes to control such scrubbing functionality.
The main use case is CXL devices which provide different scrubbers
for their built-in memories so that tools like rasdaemon can
configure and control memory scrubbing and other, more advanced RAS
functionality (Shiju Jose and Jonathan Cameron)
- Add support to ie31200_edac for client SoCs like Raptor Lake-S which
have multiple memory controllers and out-of-band ECC capability
(Qiuxu Zhuo)
- The usual round of cleanups, simplifications and fixlets
* tag 'edac_updates_for_v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: (25 commits)
MAINTAINERS: Add a secondary maintainer for bluefield_edac
EDAC/ie31200: Switch Raptor Lake-S to interrupt mode
EDAC/ie31200: Add Intel Raptor Lake-S SoCs support
EDAC/ie31200: Break up ie31200_probe1()
EDAC/ie31200: Fold the two channel loops into one loop
EDAC/ie31200: Make struct dimm_data contain decoded information
EDAC/ie31200: Make the memory controller resources configurable
EDAC/ie31200: Simplify the pci_device_id table
EDAC/ie31200: Fix the 3rd parameter name of *populate_dimm_info()
EDAC/ie31200: Fix the error path order of ie31200_init()
EDAC/ie31200: Fix the DIMM size mask for several SoCs
EDAC/ie31200: Fix the size of EDAC_MC_LAYER_CHIP_SELECT layer
EDAC/device: Fix dev_set_name() format string
EDAC/pnd2: Make read-only const array intlv static
EDAC/igen6: Constify struct res_config
EDAC/amd64: Simplify return statement in dct_ecc_enabled()
EDAC: Update memory repair control interface for memory sparing feature
EDAC: Add a memory repair control feature
EDAC: Use string choice helper functions
EDAC: Add a Error Check Scrub control feature
...
|
|
When MPOA_cache_impos_rcvd() receives the msg, it can trigger
Null Pointer Dereference Vulnerability if both entry and
holding_time are NULL. Because there is only for the situation
where entry is NULL and holding_time exists, it can be passed
when both entry and holding_time are NULL. If these are NULL,
the entry will be passd to eg_cache_put() as parameter and
it is referenced by entry->use code in it.
kasan log:
[ 3.316691] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000006:I
[ 3.317568] KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037]
[ 3.318188] CPU: 3 UID: 0 PID: 79 Comm: ex Not tainted 6.14.0-rc2 #102
[ 3.318601] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
[ 3.319298] RIP: 0010:eg_cache_remove_entry+0xa5/0x470
[ 3.319677] Code: c1 f7 6e fd 48 c7 c7 00 7e 38 b2 e8 95 64 54 fd 48 c7 c7 40 7e 38 b2 48 89 ee e80
[ 3.321220] RSP: 0018:ffff88800583f8a8 EFLAGS: 00010006
[ 3.321596] RAX: 0000000000000006 RBX: ffff888005989000 RCX: ffffffffaecc2d8e
[ 3.322112] RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000030
[ 3.322643] RBP: 0000000000000000 R08: 0000000000000000 R09: fffffbfff6558b88
[ 3.323181] R10: 0000000000000003 R11: 203a207972746e65 R12: 1ffff11000b07f15
[ 3.323707] R13: dffffc0000000000 R14: ffff888005989000 R15: ffff888005989068
[ 3.324185] FS: 000000001b6313c0(0000) GS:ffff88806d380000(0000) knlGS:0000000000000000
[ 3.325042] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 3.325545] CR2: 00000000004b4b40 CR3: 000000000248e000 CR4: 00000000000006f0
[ 3.326430] Call Trace:
[ 3.326725] <TASK>
[ 3.326927] ? die_addr+0x3c/0xa0
[ 3.327330] ? exc_general_protection+0x161/0x2a0
[ 3.327662] ? asm_exc_general_protection+0x26/0x30
[ 3.328214] ? vprintk_emit+0x15e/0x420
[ 3.328543] ? eg_cache_remove_entry+0xa5/0x470
[ 3.328910] ? eg_cache_remove_entry+0x9a/0x470
[ 3.329294] ? __pfx_eg_cache_remove_entry+0x10/0x10
[ 3.329664] ? console_unlock+0x107/0x1d0
[ 3.329946] ? __pfx_console_unlock+0x10/0x10
[ 3.330283] ? do_syscall_64+0xa6/0x1a0
[ 3.330584] ? entry_SYSCALL_64_after_hwframe+0x47/0x7f
[ 3.331090] ? __pfx_prb_read_valid+0x10/0x10
[ 3.331395] ? down_trylock+0x52/0x80
[ 3.331703] ? vprintk_emit+0x15e/0x420
[ 3.331986] ? __pfx_vprintk_emit+0x10/0x10
[ 3.332279] ? down_trylock+0x52/0x80
[ 3.332527] ? _printk+0xbf/0x100
[ 3.332762] ? __pfx__printk+0x10/0x10
[ 3.333007] ? _raw_write_lock_irq+0x81/0xe0
[ 3.333284] ? __pfx__raw_write_lock_irq+0x10/0x10
[ 3.333614] msg_from_mpoad+0x1185/0x2750
[ 3.333893] ? __build_skb_around+0x27b/0x3a0
[ 3.334183] ? __pfx_msg_from_mpoad+0x10/0x10
[ 3.334501] ? __alloc_skb+0x1c0/0x310
[ 3.334809] ? __pfx___alloc_skb+0x10/0x10
[ 3.335283] ? _raw_spin_lock+0xe0/0xe0
[ 3.335632] ? finish_wait+0x8d/0x1e0
[ 3.335975] vcc_sendmsg+0x684/0xba0
[ 3.336250] ? __pfx_vcc_sendmsg+0x10/0x10
[ 3.336587] ? __pfx_autoremove_wake_function+0x10/0x10
[ 3.337056] ? fdget+0x176/0x3e0
[ 3.337348] __sys_sendto+0x4a2/0x510
[ 3.337663] ? __pfx___sys_sendto+0x10/0x10
[ 3.337969] ? ioctl_has_perm.constprop.0.isra.0+0x284/0x400
[ 3.338364] ? sock_ioctl+0x1bb/0x5a0
[ 3.338653] ? __rseq_handle_notify_resume+0x825/0xd20
[ 3.339017] ? __pfx_sock_ioctl+0x10/0x10
[ 3.339316] ? __pfx___rseq_handle_notify_resume+0x10/0x10
[ 3.339727] ? selinux_file_ioctl+0xa4/0x260
[ 3.340166] __x64_sys_sendto+0xe0/0x1c0
[ 3.340526] ? syscall_exit_to_user_mode+0x123/0x140
[ 3.340898] do_syscall_64+0xa6/0x1a0
[ 3.341170] entry_SYSCALL_64_after_hwframe+0x77/0x7f
[ 3.341533] RIP: 0033:0x44a380
[ 3.341757] Code: 0f 1f 84 00 00 00 00 00 66 90 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c00
[ 3.343078] RSP: 002b:00007ffc1d404098 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
[ 3.343631] RAX: ffffffffffffffda RBX: 00007ffc1d404458 RCX: 000000000044a380
[ 3.344306] RDX: 000000000000019c RSI: 00007ffc1d4040b0 RDI: 0000000000000003
[ 3.344833] RBP: 00007ffc1d404260 R08: 0000000000000000 R09: 0000000000000000
[ 3.345381] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001
[ 3.346015] R13: 00007ffc1d404448 R14: 00000000004c17d0 R15: 0000000000000001
[ 3.346503] </TASK>
[ 3.346679] Modules linked in:
[ 3.346956] ---[ end trace 0000000000000000 ]---
[ 3.347315] RIP: 0010:eg_cache_remove_entry+0xa5/0x470
[ 3.347737] Code: c1 f7 6e fd 48 c7 c7 00 7e 38 b2 e8 95 64 54 fd 48 c7 c7 40 7e 38 b2 48 89 ee e80
[ 3.349157] RSP: 0018:ffff88800583f8a8 EFLAGS: 00010006
[ 3.349517] RAX: 0000000000000006 RBX: ffff888005989000 RCX: ffffffffaecc2d8e
[ 3.350103] RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000030
[ 3.350610] RBP: 0000000000000000 R08: 0000000000000000 R09: fffffbfff6558b88
[ 3.351246] R10: 0000000000000003 R11: 203a207972746e65 R12: 1ffff11000b07f15
[ 3.351785] R13: dffffc0000000000 R14: ffff888005989000 R15: ffff888005989068
[ 3.352404] FS: 000000001b6313c0(0000) GS:ffff88806d380000(0000) knlGS:0000000000000000
[ 3.353099] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 3.353544] CR2: 00000000004b4b40 CR3: 000000000248e000 CR4: 00000000000006f0
[ 3.354072] note: ex[79] exited with irqs disabled
[ 3.354458] note: ex[79] exited with preempt_count 1
Signed-off-by: Minjoong Kim <pwn9uin@gmail.com>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250322105200.14981-1-pwn9uin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Hans-Frieder Vogt says:
====================
net: tn40xx: add support for AQR105 based cards
This patch series adds support to the Tehuti tn40xx driver for TN9510 cards
which combine a TN4010 MAC with an Aquantia AQR105.
It is an update of the patch series "net: tn40xx: add support for AQR105
based cards", addressing review comments and generally cleaning up the series.
The patch was tested on a Tehuti TN9510 card (1fc9:4025:1fc9:3015).
v6: https://lore.kernel.org/20250318-tn9510-v3a-v6-0-808a9089d24b@gmx.net
v5: https://lore.kernel.org/20250222-tn9510-v3a-v5-0-99365047e309@gmx.net
v4: https://lore.kernel.org/20241221-tn9510-v3a-v4-0-dafff89ba7a7@gmx.net
v3: https://lore.kernel.org/20241217-tn9510-v3a-v3-0-4d5ef6f686e0@gmx.net
v2: https://lore.kernel.org/trinity-602c050f-bc76-4557-9824-252b0de48659-1726429697171@3c-app-gmx-bap07
v1: https://lore.kernel.org/trinity-33332a4a-1c44-46b7-8526-b53b1a94ffc2-1726082106356@3c-app-gmx-bs04
====================
Link: https://patch.msgid.link/20250322-tn9510-v3a-v7-0-672a9a3d8628@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add the PCI-ID of the AQR105-based Tehuti TN4010 cards to allow loading
of the tn40xx driver on these cards. Here, I chose the detailed definition
with the subvendor ID similar to the QT2025 cards with the PCI-ID
TEHUTI:0x4022, because there is a card with an AQ2104 hiding amongst the
AQR105 cards, and they all come with the same PCI-ID (TEHUTI:0x4025). But
the AQ2104 is currently not supported.
Signed-off-by: Hans-Frieder Vogt <hfdevel@gmx.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250322-tn9510-v3a-v7-7-672a9a3d8628@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Prepare the tn40xx driver to load for Tehuti TN9510 cards, which require
bit 3 in the register TN40_REG_MDIO_CMD_STAT to be set. The function of bit
3 is unclear, but may have something to do with the length of the preamble
in the MDIO communication. If bit 3 is not set, the PHY will not be found
when performing a scan for PHYs. Use the available tn40_mdio_set_speed
function which includes setting bit 3. Just move the function to before the
devm_mdio_register function, which scans the mdio bus for PHYs.
Signed-off-by: Hans-Frieder Vogt <hfdevel@gmx.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Link: https://patch.msgid.link/20250322-tn9510-v3a-v7-6-672a9a3d8628@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In case of an AQR105-based device, create a software node for the mdio
function, with a child node for the Aquantia AQR105 PHY, providing a
firmware-name (and a bit more, which may be used for future checks) to
allow the PHY to load a MAC specific firmware from the file system.
The name of the PHY software node follows the naming convention suggested
in the patch for the mdiobus_scan function (in the same patch series).
Signed-off-by: Hans-Frieder Vogt <hfdevel@gmx.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250322-tn9510-v3a-v7-5-672a9a3d8628@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch makes functions that were provided for aqr107 applicable to
aqr105, or replaces generic functions with specific ones. Since the aqr105
was introduced before NBASE-T was defined (or 802.3bz), there are a number
of vendor specific registers involved in the definition of the
advertisement, in auto-negotiation and in the setting of the speed. The
functions have been written following the downstream driver for TN4010
cards with aqr105 PHY, and use code from aqr107 functions wherever it
seemed to make sense.
Signed-off-by: Hans-Frieder Vogt <hfdevel@gmx.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250322-tn9510-v3a-v7-4-672a9a3d8628@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Allow the firmware name of an Aquantia PHY alternatively be provided by the
property "firmware-name" of a swnode. This software node may be provided by
the MAC or MDIO driver.
Signed-off-by: Hans-Frieder Vogt <hfdevel@gmx.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250322-tn9510-v3a-v7-3-672a9a3d8628@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Re-use the AQR107 probe function to load the firmware on the AQR105 (and
to probe the HWMON).
Signed-off-by: Hans-Frieder Vogt <hfdevel@gmx.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250322-tn9510-v3a-v7-2-672a9a3d8628@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch will allow to use a swnode/fwnode defined for a phy_device. The
MDIO bus (mii_bus) needs to contain nodes for the PHY devices, named
"ethernet-phy@i", with i being the MDIO address (0 .. PHY_MAX_ADDR - 1).
The fwnode is only attached to the phy_device if there isn't already an
fwnode attached.
fwnode_get_named_child_node will increase the usage counter of the fwnode.
However, no new code is needed to decrease the counter again, since this is
already implemented in the phy_device_release function.
Signed-off-by: Hans-Frieder Vogt <hfdevel@gmx.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250322-tn9510-v3a-v7-1-672a9a3d8628@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 resource control updates from Borislav Petkov:
- First part of the MPAM work: split the architectural part of resctrl
from the filesystem part so that ARM's MPAM varian of resource
control can be added later while sharing the user interface with x86
(James Morse)
* tag 'x86_cache_for_v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
x86/resctrl: Move get_{mon,ctrl}_domain_from_cpu() to live with their callers
x86/resctrl: Move get_config_index() to a header
x86/resctrl: Handle throttle_mode for SMBA resources
x86/resctrl: Move RFTYPE flags to be managed by resctrl
x86/resctrl: Make resctrl_arch_pseudo_lock_fn() take a plr
x86/resctrl: Make prefetch_disable_bits belong to the arch code
x86/resctrl: Allow an architecture to disable pseudo lock
x86/resctrl: Add resctrl_arch_ prefix to pseudo lock functions
x86/resctrl: Move mbm_cfg_mask to struct rdt_resource
x86/resctrl: Move mba_mbps_default_event init to filesystem code
x86/resctrl: Change mon_event_config_{read,write}() to be arch helpers
x86/resctrl: Add resctrl_arch_is_evt_configurable() to abstract BMEC
x86/resctrl: Move the is_mbm_*_enabled() helpers to asm/resctrl.h
x86/resctrl: Rewrite and move the for_each_*_rdt_resource() walkers
x86/resctrl: Move monitor init work to a resctrl init call
x86/resctrl: Move monitor exit work to a resctrl exit call
x86/resctrl: Add an arch helper to reset one resource
x86/resctrl: Move resctrl types to a separate header
x86/resctrl: Move rdt_find_domain() to be visible to arch and fs code
x86/resctrl: Expose resctrl fs's init function to the rest of the kernel
...
|
|
Joshua Washington says:
====================
Basic XDP Support for DQO RDA Queue Format
This patch series updates the GVE XDP infrastructure and introduces
XDP_PASS and XDP_DROP support for the DQO RDA queue format.
The infrastructure changes of note include an allocation path refactor
for XDP queues, and a unification of RX buffer sizes across queue
formats.
This patch series will be followed by more patch series to introduce
XDP_TX and XDP_REDIRECT support, as well as zero-copy and multi-buffer
support.
====================
Link: https://patch.msgid.link/20250321002910.1343422-1-hramamurthy@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch adds support for running XDP programs on DQ, along with
rudimentary processing for XDP_DROP and XDP_PASS. These actions require
very limited driver functionality when it comes to processing an XDP
buffer, so currently if the XDP action is not XDP_PASS, the packet is
dropped and stats are updated.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Praveen Kaliginedi <pkaligineedi@google.com>
Signed-off-by: Joshua Washington <joshwash@google.com>
Signed-off-by: Harshitha Ramamurthy<hramamurthy@google.com>
Link: https://patch.msgid.link/20250321002910.1343422-7-hramamurthy@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In order to support installing an XDP program on DQ, RX buffers need to
be reposted using 4K buffers, which is larger than the default packet
buffer size of 2K. This is needed to accommodate the extra head and tail
that accompanies the data portion of an XDP buffer. Continuing to use 2K
buffers would mean that the packet buffer size for the NIC would have to
be restricted to 2048 - 320 - 256 = 1472B. However, this is problematic
for two reasons: first, 1472 is not a packet buffer size accepted by
GVE; second, at least 1474B of buffer space is needed to accommodate an
MTU of 1460, which is the default on GCP. As such, we allocate 4K
buffers, and post a 2K section of those 4K buffers (offset relative to
the XDP headroom) to the NIC for DMA to avoid a potential extra copy.
Because the GQ-QPL datapath requires copies regardless, this change was
not needed to support XDP in that case.
To capture this subtlety, a new field, packet_buffer_truesize, has been
added to the rx ring struct to represent size of the allocated buffer,
while packet_buffer_size has been left to represent the portion of the
buffer posted to the NIC.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Praveen Kaligineedi <pkaligineedi@google.com>
Signed-off-by: Joshua Washington <joshwash@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20250321002910.1343422-6-hramamurthy@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The data_buffer_size_dqo field in gve_priv and the packet_buffer_size
field in gve_rx_ring theoretically have the same meaning, but they are
defined in two different places and used in two separate contexts. There
is no good reason for this, so this change merges those fields into the
packet_buffer_size field in the RX ring.
This change also introduces a packet_buffer_size field to struct
gve_rx_queue_config to account for cases where queues are not allocated,
such as when the interface is down.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Joshua Washington <joshwash@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20250321002910.1343422-5-hramamurthy@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit ebdfae0d377b ("gve: adopt page pool for DQ RDA mode") introduced
a buf_size field to the gve_rx_slot_page_info struct, which can be used
in the datapath to take the place of the packet_buffer_size field, as it
will already be hot in the cache due to its extensive use. Using the
buf_size field in the datapath frees up the packet_buffer_size field in
the GQ-specific RX cacheline to be generalized for GQ and DQ (in the
next patch), as there is currently no common packet buffer size field
between the two queue formats.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Joshua Washington <joshwash@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20250321002910.1343422-4-hramamurthy@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
An earlier patch series[1] introduced RX/TX ring allocation configuration
structs which contained metadata used to allocate and configure new RX
and TX rings. This led to a much cleaner and safer allocation pattern
wherein queue resources were not deallocated until new queue resources
were successfully allocated.
Migrate the XDP allocation path to use the same pattern to allow for the
existence of a single allocation path instead of relying on XDP-specific
allocation methods. These extra allocation methods result in the
duplication of many existing behaviors while being prone to error when
configuration changes unrelated to XDP occur.
Link: https://lore.kernel.org/netdev/20240122182632.1102721-1-shailend@google.com/ [1]
Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Joshua Washington <joshwash@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20250321002910.1343422-3-hramamurthy@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
These statistics pollute the hotpath and do not have any real-world use
or meaning.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Joshua Washington <joshwash@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20250321002910.1343422-2-hramamurthy@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If we fail to configure the MAC or PCS according to the desired mode,
do not allow the network link to come up until we have successfully
configured the MAC and PCS. This improves phylink's behaviour when an
error occurs.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1twkqO-0006FI-Gm@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This commit enables the CLK_MTMIPS driver for omega2+ and vocore2
devices. This driver is required for these devices to boot properly.
Without it, the devices fail to obtain the CPU clock, resulting in a
kernel panic.
Signed-off-by: Joris Vaisvila <joey@tinyisr.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 speculation mitigation updates from Borislav Petkov:
- Some preparatory work to convert the mitigations machinery to
mitigating attack vectors instead of single vulnerabilities
- Untangle and remove a now unneeded X86_FEATURE_USE_IBPB flag
- Add support for a Zen5-specific SRSO mitigation
- Cleanups and minor improvements
* tag 'x86_bugs_for_v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bugs: Make spectre user default depend on MITIGATION_SPECTRE_V2
x86/bugs: Use the cpu_smt_possible() helper instead of open-coded code
x86/bugs: Add AUTO mitigations for mds/taa/mmio/rfds
x86/bugs: Relocate mds/taa/mmio/rfds defines
x86/bugs: Add X86_BUG_SPECTRE_V2_USER
x86/bugs: Remove X86_FEATURE_USE_IBPB
KVM: nVMX: Always use IBPB to properly virtualize IBRS
x86/bugs: Use a static branch to guard IBPB on vCPU switch
x86/bugs: Remove the X86_FEATURE_USE_IBPB check in ib_prctl_set()
x86/mm: Remove X86_FEATURE_USE_IBPB checks in cond_mitigation()
x86/bugs: Move the X86_FEATURE_USE_IBPB check into callers
x86/bugs: KVM: Add support for SRSO_MSR_FIX
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"Nothing major this time around.
Apart from the usual perf/PMU updates, some page table cleanups, the
notable features are average CPU frequency based on the AMUv1
counters, CONFIG_HOTPLUG_SMT and MOPS instructions (memcpy/memset) in
the uaccess routines.
Perf and PMUs:
- Support for the 'Rainier' CPU PMU from Arm
- Preparatory driver changes and cleanups that pave the way for BRBE
support
- Support for partial virtualisation of the Apple-M1 PMU
- Support for the second event filter in Arm CSPMU designs
- Minor fixes and cleanups (CMN and DWC PMUs)
- Enable EL2 requirements for FEAT_PMUv3p9
Power, CPU topology:
- Support for AMUv1-based average CPU frequency
- Run-time SMT control wired up for arm64 (CONFIG_HOTPLUG_SMT). It
adds a generic topology_is_primary_thread() function overridden by
x86 and powerpc
New(ish) features:
- MOPS (memcpy/memset) support for the uaccess routines
Security/confidential compute:
- Fix the DMA address for devices used in Realms with Arm CCA. The
CCA architecture uses the address bit to differentiate between
shared and private addresses
- Spectre-BHB: assume CPUs Linux doesn't know about vulnerable by
default
Memory management clean-ups:
- Drop the P*D_TABLE_BIT definition in preparation for 128-bit PTEs
- Some minor page table accessor clean-ups
- PIE/POE (permission indirection/overlay) helpers clean-up
Kselftests:
- MTE: skip hugetlb tests if MTE is not supported on such mappings
and user correct naming for sync/async tag checking modes
Miscellaneous:
- Add a PKEY_UNRESTRICTED definition as 0 to uapi (toolchain people
request)
- Sysreg updates for new register fields
- CPU type info for some Qualcomm Kryo cores"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (72 commits)
arm64: mm: Don't use %pK through printk
perf/arm_cspmu: Fix missing io.h include
arm64: errata: Add newer ARM cores to the spectre_bhb_loop_affected() lists
arm64: cputype: Add MIDR_CORTEX_A76AE
arm64: errata: Add KRYO 2XX/3XX/4XX silver cores to Spectre BHB safe list
arm64: errata: Assume that unknown CPUs _are_ vulnerable to Spectre BHB
arm64: errata: Add QCOM_KRYO_4XX_GOLD to the spectre_bhb_k24_list
arm64/sysreg: Enforce whole word match for open/close tokens
arm64/sysreg: Fix unbalanced closing block
arm64: Kconfig: Enable HOTPLUG_SMT
arm64: topology: Support SMT control on ACPI based system
arch_topology: Support SMT control for OF based system
cpu/SMT: Provide a default topology_is_primary_thread()
arm64/mm: Define PTDESC_ORDER
perf/arm_cspmu: Add PMEVFILT2R support
perf/arm_cspmu: Generalise event filtering
perf/arm_cspmu: Move register definitons to header
arm64/kernel: Always use level 2 or higher for early mappings
arm64/mm: Drop PXD_TABLE_BIT
arm64/mm: Check pmd_table() in pmd_trans_huge()
...
|
|
The platform device driver data has not been used since commit
7a4ca51b7040 ("thermal/drivers/qcom-spmi: Use devm_iio_channel_get") so
drop the unnecessary assignment.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250228082936.5694-1-johan+linaro@kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
The hardware calibration is fused on some, but not all, Gen3 and Gen4
boards. The calibrations values are the same on both generations but
located at different register offsets.
Instead of having duplicated logic to read the and store the values
create structure to hold the register parameters and have a common
function do the reading.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20250305174631.4119374-3-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
The style of the driver is to use lowercase hex constants, correct the
few outlines.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20250305174631.4119374-2-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
DTS example in the bindings should be indented with 2- or 4-spaces and
aligned with opening '- |', so correct any differences like 3-spaces or
mixtures 2- and 4-spaces in one binding.
No functional changes here, but saves some comments during reviews of
new patches built on existing code.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250107131027.246608-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
BCM74110 uses a different process node compared to previous chips that
requires a different equation, account for that.
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20250116193842.758788-3-florian.fainelli@broadcom.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Update the binding with the BCM74110 compatible string which denotes the
first device we need to support in a different process node requiring an
updated thermal equation.
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250116193842.758788-2-florian.fainelli@broadcom.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Only sensors that are valid need to have their interrupts enable status
updated based on their thresholds. Use the lvts_for_each_valid_sensor()
helper in lvts_update_irq_mask() to ignore invalid sensors.
Currently, since the invalid sensors will always contain zeroed out
thresholds (from kzalloc), they will always get their interrupts
disabled on this loop. So this commit doesn't change the resulting
interrupts configuration, but it slightly optimizes the loop by skipping
the invalid sensors, avoids potential future surprises if at some point
memory is no longer allocated for invalid sensors, as well as makes the
code more obvious.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20250113-mt8192-lvts-filtered-suspend-fix-v2-5-07a25200c7c6@collabora.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Interrupts are enabled per sensor in lvts_update_irq_mask() as needed,
there's no point in enabling all of them during initialization. Change
the MONINT register initial value so all sensor interrupts start
disabled.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20250113-mt8192-lvts-filtered-suspend-fix-v2-4-07a25200c7c6@collabora.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
In order to get working interrupts, a low offset value needs to be
configured. The minimum value for it is 20 Celsius, which is what is
configured when there's no lower thermal trip (ie the thermal core
passes -INT_MAX as low trip temperature). However, when the temperature
gets that low and fluctuates around that value it causes an interrupt
storm.
Prevent that interrupt storm by not enabling the low offset interrupt if
the low threshold is the minimum one.
Cc: stable@vger.kernel.org
Fixes: 77354eaef821 ("thermal/drivers/mediatek/lvts_thermal: Don't leave threshold zeroed")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20250113-mt8192-lvts-filtered-suspend-fix-v2-3-07a25200c7c6@collabora.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
The Stage 3 thermal threshold is currently configured during
the controller initialization to 105 Celsius. From the kernel
perspective, this configuration is harmful because:
* The stage 3 interrupt that gets triggered when the threshold is
crossed is not handled in any way by the IRQ handler, it just gets
cleared. Besides, the temperature used for stage 3 comes from the
sensors, and the critical thermal trip points described in the
Devicetree will already cause a shutdown when crossed (at a lower
temperature, of 100 Celsius, for all SoCs currently using this
driver).
* The only effect of crossing the stage 3 threshold that has been
observed is that it causes the machine to no longer be able to enter
suspend. Even if that was a result of a momentary glitch in the
temperature reading of a sensor (as has been observed on the
MT8192-based Chromebooks).
For those reasons, disable the Stage 3 thermal threshold configuration.
Cc: stable@vger.kernel.org
Reported-by: Hsin-Te Yuan <yuanhsinte@chromium.org>
Closes: https://lore.kernel.org/all/20241108-lvts-v1-1-eee339c6ca20@chromium.org/
Fixes: f5f633b18234 ("thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20250113-mt8192-lvts-filtered-suspend-fix-v2-2-07a25200c7c6@collabora.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
When configured in filtered mode, the LVTS thermal controller will
monitor the temperature from the sensors and trigger an interrupt once a
thermal threshold is crossed.
Currently this is true even during suspend and resume. The problem with
that is that when enabling the internal clock of the LVTS controller in
lvts_ctrl_set_enable() during resume, the temperature reading can glitch
and appear much higher than the real one, resulting in a spurious
interrupt getting generated.
Disable the temperature monitoring and give some time for the signals to
stabilize during suspend in order to prevent such spurious interrupts.
Cc: stable@vger.kernel.org
Reported-by: Hsin-Te Yuan <yuanhsinte@chromium.org>
Closes: https://lore.kernel.org/all/20241108-lvts-v1-1-eee339c6ca20@chromium.org/
Fixes: 8137bb90600d ("thermal/drivers/mediatek/lvts_thermal: Add suspend and resume")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20250113-mt8192-lvts-filtered-suspend-fix-v2-1-07a25200c7c6@collabora.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
The struct thermal_zone_device is already declared on line 32, so the
duplicate declaration has been removed.
Fixes: b1ae92dcfa8e ("thermal: core: Make struct thermal_zone_device definition internal")
Signed-off-by: xueqin Luo <luoxueqin@kylinos.cn>
Link: https://lore.kernel.org/r/20250206081436.51785-1-luoxueqin@kylinos.cn
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
The mapping table for the rk3328 is missing the entry for -25C which is
found in the TRM section 9.5.2 "Temperature-to-code mapping".
NOTE: the kernel uses the tsadc_q_sel=1'b1 mode which is defined as:
4096-<code in table>. Whereas the table in the TRM gives the code
"3774" for -25C, the kernel uses 4096-3774=322.
[Dragan Simic] : "After going through the RK3308 and RK3328 TRMs, as
well as through the downstream kernel code, it seems we may have
some troubles at our hands. Let me explain, please.
To sum it up, part 1 of the RK3308 TRM v1.1 says on page 538 that
the equation for the output when tsadc_q_sel equals 1 is (4096 -
tsadc_q), while part 1 of the RK3328 TRM v1.2 says that the output
equation is (1024 - tsadc_q) in that case.
The downstream kernel code, however, treats the RK3308 and RK3328
tables and their values as being the same. It even mentions 1024 as
the "offset" value in a comment block for the rk_tsadcv3_control()
function, just like the upstream code does, which is obviously wrong
"offset" value when correlated with the table on page 544 of part 1
of the RK3308 TRM v1.1.
With all this in mind, it's obvious that more work is needed to make
it clear where's the actual mistake (it could be that the TRM is
wrong), which I'll volunteer for as part of the SoC binning project.
In the meantime, this patch looks fine as-is to me, by offering
what's a clear improvement to the current state of the upstream
code"
Link: https://opensource.rock-chips.com/images/9/97/Rockchip_RK3328TRM_V1.1-Part1-20170321.pdf
Cc: stable@vger.kernel.org
Fixes: eda519d5f73e ("thermal: rockchip: Support the RK3328 SOC in thermal driver")
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/20250207175048.35959-1-twoerner@gmail.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
SoCs without RPM need to enable sensors and calibrate them from the kernel.
The IPQ5332 and IPQ5424 use the tsens v2.3.3 IP and do not have RPM.
Therefore, add a new calibration function for V2, as the tsens.c calib
function only supports V1. Also add new feature_config, ops and data for
IPQ5332, IPQ5424.
Although the TSENS IP supports 16 sensors, not all are used. The hw_id
is used to enable the relevant sensors.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
Link: https://lore.kernel.org/r/20250210120436.821684-3-quic_mmanikan@quicinc.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
The IPQ5332 and IPQ5424 use TSENS v2.3.3 IP with combined interrupt.
RPM is not available in these SoCs, hence adding new compatible
to have the sensor enablement and calibration function. Also add
nvmem-cell-names.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
Link: https://lore.kernel.org/r/20250210120436.821684-2-quic_mmanikan@quicinc.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Enable power-down of TMU (Thermal Management Unit) for TMU version 2 during
system suspend to save power. Save approximately 4.3mW on VDD_ANA_1P8 on
i.MX93 platforms.
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20241209164859.3758906-2-Frank.Li@nxp.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Use dev_err_probe() and devm_clk_get_optional_enabled() to simplify the
code.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20241209164859.3758906-1-Frank.Li@nxp.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
* for-next/el2-enable-feat-pmuv3p9:
: Enable EL2 requirements for FEAT_PMUv3p9
arm64/boot: Enable EL2 requirements for FEAT_PMUv3p9
|
|
* for-next/smt-control:
: Support SMT control on arm64
arm64: Kconfig: Enable HOTPLUG_SMT
arm64: topology: Support SMT control on ACPI based system
arch_topology: Support SMT control for OF based system
cpu/SMT: Provide a default topology_is_primary_thread()
|
|
'for-next/sysreg', 'for-next/misc', 'for-next/pgtable-cleanups', 'for-next/kselftest', 'for-next/uaccess-mops', 'for-next/pie-poe-cleanup', 'for-next/cputype-kryo', 'for-next/cca-dma-address', 'for-next/drop-pxd_table_bit' and 'for-next/spectre-bhb-assume-vulnerable', remote-tracking branch 'arm64/for-next/perf' into for-next/core
* arm64/for-next/perf:
perf/arm_cspmu: Fix missing io.h include
perf/arm_cspmu: Add PMEVFILT2R support
perf/arm_cspmu: Generalise event filtering
perf/arm_cspmu: Move register definitons to header
drivers/perf: apple_m1: Support host/guest event filtering
drivers/perf: apple_m1: Refactor event select/filter configuration
perf/dwc_pcie: fix duplicate pci_dev devices
perf/dwc_pcie: fix some unreleased resources
perf/arm-cmn: Minor event type housekeeping
perf: arm_pmu: Move PMUv3-specific data
perf: apple_m1: Don't disable counter in m1_pmu_enable_event()
perf: arm_v7_pmu: Don't disable counter in (armv7|krait_|scorpion_)pmu_enable_event()
perf: arm_v7_pmu: Drop obvious comments for enabling/disabling counters and interrupts
perf: arm_pmuv3: Don't disable counter in armv8pmu_enable_event()
perf: arm_pmu: Don't disable counter in armpmu_add()
perf: arm_pmuv3: Call kvm_vcpu_pmu_resync_el0() before enabling counters
perf: arm_pmuv3: Add support for ARM Rainier PMU
* for-next/amuv1-avg-freq:
: Add support for AArch64 AMUv1-based average freq
arm64: Utilize for_each_cpu_wrap for reference lookup
arm64: Update AMU-based freq scale factor on entering idle
arm64: Provide an AMU-based version of arch_freq_get_on_cpu
cpufreq: Introduce an optional cpuinfo_avg_freq sysfs entry
cpufreq: Allow arch_freq_get_on_cpu to return an error
arch_topology: init capacity_freq_ref to 0
* for-next/pkey_unrestricted:
: mm/pkey: Add PKEY_UNRESTRICTED macro
selftest/powerpc/mm/pkey: fix build-break introduced by commit 00894c3fc917
selftests/powerpc: Use PKEY_UNRESTRICTED macro
selftests/mm: Use PKEY_UNRESTRICTED macro
mm/pkey: Add PKEY_UNRESTRICTED macro
* for-next/sysreg:
: arm64 sysreg updates
arm64/sysreg: Enforce whole word match for open/close tokens
arm64/sysreg: Fix unbalanced closing block
arm64/sysreg: Add register fields for HFGWTR2_EL2
arm64/sysreg: Add register fields for HFGRTR2_EL2
arm64/sysreg: Add register fields for HFGITR2_EL2
arm64/sysreg: Add register fields for HDFGWTR2_EL2
arm64/sysreg: Add register fields for HDFGRTR2_EL2
arm64/sysreg: Update register fields for ID_AA64MMFR0_EL1
* for-next/misc:
: Miscellaneous arm64 patches
arm64: mm: Don't use %pK through printk
arm64/fpsimd: Remove unused declaration fpsimd_kvm_prepare()
* for-next/pgtable-cleanups:
: arm64 pgtable accessors cleanup
arm64/mm: Define PTDESC_ORDER
arm64/kernel: Always use level 2 or higher for early mappings
arm64/hugetlb: Consistently use pud_sect_supported()
arm64/mm: Convert __pte_to_phys() and __phys_to_pte_val() as functions
* for-next/kselftest:
: arm64 kselftest updates
kselftest/arm64: mte: Skip the hugetlb tests if MTE not supported on such mappings
kselftest/arm64: mte: Use the correct naming for tag check modes in check_hugetlb_options.c
* for-next/uaccess-mops:
: Implement the uaccess memory copy/set using MOPS instructions
arm64: lib: Use MOPS for usercopy routines
arm64: mm: Handle PAN faults on uaccess CPY* instructions
arm64: extable: Add fixup handling for uaccess CPY* instructions
* for-next/pie-poe-cleanup:
: PIE/POE helpers cleanup
arm64/sysreg: Move POR_EL0_INIT to asm/por.h
arm64/sysreg: Rename POE_RXW to POE_RWX
arm64/sysreg: Improve PIR/POR helpers
* for-next/cputype-kryo:
: Add cputype info for some Qualcomm Kryo cores
arm64: cputype: Add comments about Qualcomm Kryo 5XX and 6XX cores
arm64: cputype: Add QCOM_CPU_PART_KRYO_3XX_GOLD
* for-next/cca-dma-address:
: Fix DMA address for devices used in realms with Arm CCA
arm64: realm: Use aliased addresses for device DMA to shared buffers
dma: Introduce generic dma_addr_*crypted helpers
dma: Fix encryption bit clearing for dma_to_phys
* for-next/drop-pxd_table_bit:
: Drop the arm64 PXD_TABLE_BIT (clean-up in preparation for 128-bit PTEs)
arm64/mm: Drop PXD_TABLE_BIT
arm64/mm: Check pmd_table() in pmd_trans_huge()
arm64/mm: Check PUD_TYPE_TABLE in pud_bad()
arm64/mm: Check PXD_TYPE_TABLE in [p4d|pgd]_bad()
arm64/mm: Clear PXX_TYPE_MASK and set PXD_TYPE_SECT in [pmd|pud]_mkhuge()
arm64/mm: Clear PXX_TYPE_MASK in mk_[pmd|pud]_sect_prot()
arm64/ptdump: Test PMD_TYPE_MASK for block mapping
KVM: arm64: ptdump: Test PMD_TYPE_MASK for block mapping
* for-next/spectre-bhb-assume-vulnerable:
: Rework Spectre BHB mitigations to not assume "safe"
arm64: errata: Add newer ARM cores to the spectre_bhb_loop_affected() lists
arm64: cputype: Add MIDR_CORTEX_A76AE
arm64: errata: Add KRYO 2XX/3XX/4XX silver cores to Spectre BHB safe list
arm64: errata: Assume that unknown CPUs _are_ vulnerable to Spectre BHB
arm64: errata: Add QCOM_KRYO_4XX_GOLD to the spectre_bhb_k24_list
|
