summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-10-17[CIFS] Remove obsolete commentSteve French
Signed-off-by: Steven French <smfrench@gmail.com>
2014-10-17openvswitch: Create right mask with disabled megaflowsPravin B Shelar
If megaflows are disabled, the userspace does not send the netlink attribute OVS_FLOW_ATTR_MASK, and the kernel must create an exact match mask. sw_flow_mask_set() sets every bytes (in 'range') of the mask to 0xff, even the bytes that represent padding for struct sw_flow, or the bytes that represent fields that may not be set during ovs_flow_extract(). This is a problem, because when we extract a flow from a packet, we do not memset() anymore the struct sw_flow to 0. This commit gets rid of sw_flow_mask_set() and introduces mask_set_nlattr(), which operates on the netlink attributes rather than on the mask key. Using this approach we are sure that only the bytes that the user provided in the flow are matched. Also, if the parse_flow_mask_nlattrs() for the mask ENCAP attribute fails, we now return with an error. This bug is introduced by commit 0714812134d7dcadeb7ecfbfeb18788aa7e1eaac ("openvswitch: Eliminate memset() from flow_extract"). Reported-by: Alex Wang <alexw@nicira.com> Signed-off-by: Daniele Di Proietto <ddiproietto@vmware.com> Signed-off-by: Andy Zhou <azhou@nicira.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-17vxlan: fix a free after useLi RongQing
pskb_may_pull maybe change skb->data and make eth pointer oboslete, so eth needs to reload Fixes: 91269e390d062 ("vxlan: using pskb_may_pull as early as possible") Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-17openvswitch: fix a use after freeLi RongQing
pskb_may_pull() called by arphdr_ok can change skb->data, so put the arp setting after arphdr_ok to avoid the use the freed memory Fixes: 0714812134d7d ("openvswitch: Eliminate memset() from flow_extract.") Cc: Jesse Gross <jesse@nicira.com> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Acked-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-17ipv4: dst_entry leak in ip_send_unicast_reply()Vasily Averin
ip_setup_cork() called inside ip_append_data() steals dst entry from rt to cork and in case errors in __ip_append_data() nobody frees stolen dst entry Fixes: 2e77d89b2fa8 ("net: avoid a pair of dst_hold()/dst_release() in ip_append_data()") Signed-off-by: Vasily Averin <vvs@parallels.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-17perf script: Add period as a default output columnJiri Olsa
Adding period as a default output column in script command fo hardware, software and raw events. If PERF_SAMPLE_PERIOD sample type is defined in perf.data, following will be displayed in perf script output: $ perf script ls 8034 57477.887209: 250000 task-clock: ffffffff81361d72 memset ([kernel.kallsyms]) ls 8034 57477.887464: 250000 task-clock: ffffffff816f6d92 _raw_spin_unlock_irqrestore ([kernel.kallsyms]) ls 8034 57477.887708: 250000 task-clock: ffffffff811a94f0 do_munmap ([kernel.kallsyms]) ls 8034 57477.887959: 250000 task-clock: 34080916c6 get_next_seq (/usr/lib64/libc-2.17.so) ls 8034 57477.888208: 250000 task-clock: 3408079230 _IO_doallocbuf (/usr/lib64/libc-2.17.so) ls 8034 57477.888717: 250000 task-clock: ffffffff814242c8 n_tty_write ([kernel.kallsyms]) ls 8034 57477.889285: 250000 task-clock: 3408076402 fwrite_unlocked (/usr/lib64/libc-2.17.so) Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: "Jen-Cheng(Tommy) Huang" <tommy24@gatech.edu> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jen-Cheng(Tommy) Huang <tommy24@gatech.edu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1408977943-16594-10-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-10-17perf script: Add period data columnJiri Olsa
Adding period data column to be displayed in perf script. It's possible to get period values using -f option, like: $ perf script -f comm,tid,time,period,ip,sym,dso :26019 26019 52414.329088: 3707 ffffffff8105443a native_write_msr_safe ([kernel.kallsyms]) :26019 26019 52414.329088: 44 ffffffff8105443a native_write_msr_safe ([kernel.kallsyms]) :26019 26019 52414.329093: 1987 ffffffff8105443a native_write_msr_safe ([kernel.kallsyms]) :26019 26019 52414.329093: 6 ffffffff8105443a native_write_msr_safe ([kernel.kallsyms]) ls 26019 52414.329442: 537558 3407c0639c _dl_map_object_from_fd (/usr/lib64/ld-2.17.so) ls 26019 52414.329442: 2099 3407c0639c _dl_map_object_from_fd (/usr/lib64/ld-2.17.so) ls 26019 52414.330181: 1242100 34080917bb get_next_seq (/usr/lib64/libc-2.17.so) ls 26019 52414.330181: 3774 34080917bb get_next_seq (/usr/lib64/libc-2.17.so) ls 26019 52414.331427: 1083662 ffffffff810c7dc2 update_curr ([kernel.kallsyms]) ls 26019 52414.331427: 360 ffffffff810c7dc2 update_curr ([kernel.kallsyms]) Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: David Ahern <dsahern@gmail.com> Cc: "Jen-Cheng(Tommy) Huang" <tommy24@gatech.edu> Cc: Andi Kleen <andi@firstfloor.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jen-Cheng(Tommy) Huang <tommy24@gatech.edu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1408977943-16594-9-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-10-17mtd: spi-nor: make spi_nor_scan() take a chip type name, not spi_device_idBen Hutchings
Drivers currently call spi_nor_match_id() and then spi_nor_scan(). This adds a dependency on struct spi_device_id which we want to avoid. Make spi_nor_scan() do it for them. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-10-17mtd: m25p80: get rid of spi_get_device_idRafał Miłecki
This simplifies the way we use spi_nor framework and will allow us to drop spi_nor_match_id. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-10-17ipv4: clean up cookie_v4_check()Cong Wang
We can retrieve opt from skb, no need to pass it as a parameter. And opt should always be non-NULL, no need to check. Cc: Krzysztof Kolasa <kkolasa@winsoft.pl> Cc: Eric Dumazet <edumazet@google.com> Tested-by: Krzysztof Kolasa <kkolasa@winsoft.pl> Signed-off-by: Cong Wang <cwang@twopensource.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-17ipv4: share tcp_v4_save_options() with cookie_v4_check()Cong Wang
cookie_v4_check() allocates ip_options_rcu in the same way with tcp_v4_save_options(), we can just make it a helper function. Cc: Krzysztof Kolasa <kkolasa@winsoft.pl> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Cong Wang <cwang@twopensource.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-17ipv4: call __ip_options_echo() in cookie_v4_check()Cong Wang
commit 971f10eca186cab238c49da ("tcp: better TCP_SKB_CB layout to reduce cache line misses") missed that cookie_v4_check() still calls ip_options_echo() which uses IPCB(). It should use TCPCB() at TCP layer, so call __ip_options_echo() instead. Fixes: commit 971f10eca186cab238c49da ("tcp: better TCP_SKB_CB layout to reduce cache line misses") Cc: Krzysztof Kolasa <kkolasa@winsoft.pl> Cc: Eric Dumazet <edumazet@google.com> Reported-by: Krzysztof Kolasa <kkolasa@winsoft.pl> Tested-by: Krzysztof Kolasa <kkolasa@winsoft.pl> Signed-off-by: Cong Wang <cwang@twopensource.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-17drm/armada: convert to use vblank_on/off callsRussell King
A future commit changes the way various vblank calls behave, which causes drivers to break. Converting to use the drm_crtc_vblank_on/off calls avoids this breakage. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-10-17drm/armada: fix page_flip refcounting leakRussell King
A refcounting leak was found of the original frame buffer attached to the CRTC when using the page_flip ioctl, resulting in the frame buffer never being freed. This was not obvious initially, as if the page flip subsequently re-attaches the original frame buffer, the refcounts will be balanced. However, if the original frame buffer is freed, then it will be leaked. Fix this by ensuring that we take a reference on the incoming fb, but rely on the queued work to drop that ref count. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-10-17drm/armada: add IRQ support backRussell King
Add IRQ support back so that vblank ioctls work again. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-10-17atm: simplify lanai.c by using module_pci_driverMichael Opdenacker
This simplifies the lanai.c driver by using the module_pci_driver() macro, at the expense of losing only debugging messages. Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-17crypto: memzero_explicit - make sure to clear out sensitive dataDaniel Borkmann
Recently, in commit 13aa93c70e71 ("random: add and use memzero_explicit() for clearing data"), we have found that GCC may optimize some memset() cases away when it detects a stack variable is not being used anymore and going out of scope. This can happen, for example, in cases when we are clearing out sensitive information such as keying material or any e.g. intermediate results from crypto computations, etc. With the help of Coccinelle, we can figure out and fix such occurences in the crypto subsytem as well. Julia Lawall provided the following Coccinelle program: @@ type T; identifier x; @@ T x; ... when exists when any -memset +memzero_explicit (&x, -0, ...) ... when != x when strict @@ type T; identifier x; @@ T x[...]; ... when exists when any -memset +memzero_explicit (x, -0, ...) ... when != x when strict Therefore, make use of the drop-in replacement memzero_explicit() for exactly such cases instead of using memset(). Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Julia Lawall <julia.lawall@lip6.fr> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2014-10-17random: add and use memzero_explicit() for clearing dataDaniel Borkmann
zatimend has reported that in his environment (3.16/gcc4.8.3/corei7) memset() calls which clear out sensitive data in extract_{buf,entropy, entropy_user}() in random driver are being optimized away by gcc. Add a helper memzero_explicit() (similarly as explicit_bzero() variants) that can be used in such cases where a variable with sensitive data is being cleared out in the end. Other use cases might also be in crypto code. [ I have put this into lib/string.c though, as it's always built-in and doesn't need any dependencies then. ] Fixes kernel bugzilla: 82041 Reported-by: zatimend@hotmail.co.uk Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
2014-10-17perf evsel: No need to drag util/cgroup.hArnaldo Carvalho de Melo
The only thing we need is a forward declaration for 'struct cgroup_sel', that is inside 'struct perf_evsel'. Include cgroup.h instead on the tools that support cgroups. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-b7kuymbgf0zxi5viyjjtu5hk@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-10-17perf evlist: Add missing 'struct option' forward declarationArnaldo Carvalho de Melo
It was being found, by chance, because evsel.h needlessly includes util/cgroup.h, which will be sorted out in a following patch. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-xsvxr747wkkpg1ay9dramorr@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-10-17perf evsel: Move exit stuff from __delete to __exitArnaldo Carvalho de Melo
So that when an evsel is embedded into other struct it can free up resources calling perf_evsel__exit(). Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-n1w68pfe9m2vkhm4sqs8y1en@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-10-17s390/uprobes: fix kprobes dependencyJan Willeke
If kprobes is disabled uprobes will not compile. Fix this by including the correct header files. Signed-off-by: Jan Willeke <willeke@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-17s390: wire up bpf syscallHeiko Carstens
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-17spi/rockchip: spi controller must be disabled in tx callback tooAddy Ke
Signed-off-by: Addy Ke <addy.ke@rock-chips.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-17ntb: Adding split BAR support for Haswell platformsDave Jiang
On the Haswell platform, a split BAR option to allow creation of 2 32bit BARs (4 and 5) from the 64bit BAR 4. Adding support for this new option. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2014-10-17ntb: use errata flag set via DID to implement workaroundDave Jiang
Instead of using a module parameter, we should detect the errata via PCI DID and then set an appropriate flag. This will be used for additional errata later on. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2014-10-17ntb: conslidate reading of PPD to move platform detection earlierDave Jiang
To simplify some of the platform detection code. Move the platform detection to a function to be called earlier. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2014-10-17ntb: move platform detection to separate functionDave Jiang
Move the platform detection function to separate functions to allow easier maintenence. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2014-10-17NTB: debugfs device entryJon Mason
Create a debugfs entry for the NTB device to log the basic device info, as well as display the error count on a number of registers. Signed-off-by: Jon Mason <jon.mason@intel.com>
2014-10-17Revert "Btrfs: race free update of commit root for ro snapshots"Chris Mason
This reverts commit 9c3b306e1c9e6be4be09e99a8fe2227d1005effc. Switching only one commit root during a transaction is wrong because it leads the fs into an inconsistent state. All commit roots should be switched at once, at transaction commit time, otherwise backref walking can often miss important references that were only accessible through the old commit root. Plus, the root item for the snapshot's root wasn't getting updated and preventing the next transaction commit to do it. This made several users get into random corruption issues after creation of readonly snapshots. A regression test for xfstests will follow soon. Cc: stable@vger.kernel.org # 3.17 Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-10-17Merge branch 'int340x-thermal' of .git into nextZhang Rui
2014-10-17Thermal: int340x thermal: select ACPI fan driverZhang Rui
we share the same driver for both ACPI predefined Fan device and INT3404 Fan device, thus we should select the ACPI Fan driver when int340x thermal drivers are enabeld. Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2014-10-17kprobes/x86: Remove stale ARCH_SUPPORTS_KPROBES_ON_FTRACE defineAnton Blanchard
Commit e7dbfe349d12 ("kprobes/x86: Move ftrace-based kprobe code into kprobes-ftrace.c") switched from using ARCH_SUPPORTS_KPROBES_ON_FTRACE to CONFIG_KPROBES_ON_FTRACE but missed removing the define. Signed-off-by: Anton Blanchard <anton@samba.org> Cc: masami.hiramatsu.pt@hitachi.com Cc: ananth@in.ibm.com Cc: a.p.zijlstra@chello.nl Cc: fweisbec@gmail.com Cc: rostedt@goodmis.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-10-17ARM: dts: Explicitly set dr_mode on exynos5420-arndale-octaSjoerd Simons
Explicitly set the dr_mode for the second dwc3 controller on the Arndale Octa board to host mode. This is required to ensure the controller is initialized in the right mode if the kernel is build with USB gadget support. Reported-By: Andreas Faerber <afaerber@suse.de> Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-10-17ARM: dts: Explicitly set dr_mode on exynos Peach boardsSjoerd Simons
In case the optional dr_mode property isn't set in the dwc3 nodes the the controller will go into OTG mode if both USB host and USB gadget functionality are enabled in the kernel configuration. Unfortunately this results in USB not working on exynos5420-peach-pit and exynos5800-peach-pi with such a kernel configuration unless manually change the mode. To resolve that explicitly configure the dual role mode as host. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Reviewed-by: Andreas Faerber <afaerber@suse.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-10-16drm/radeon: reduce sparse false positive warningsMichele Curti
include radeon_asic.h header file in the various xxx_dpm.c files to reduce sparse false positive warnings. Not so great patch in itself, but reducing warning count from 391 to 258 may help to see real problems.. Signed-off-by: Michele Curti <michele.curti@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-10-16drm/radeon: fix vm page table block size calculationAlex Deucher
The page offset is 12 bits. For example if we have an 8 GB VM, we'd need 33 bits. The number of bits needed for PD + PT is 21 (33 - 12 or log2(8) + 18), not 20 (log2(8) + 17). Noticed by Alexey during code review. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2014-10-16drm/ttm: Don't evict BOs outside of the requested placement rangeMichel Dänzer
The radeon driver uses placement range restrictions for several reasons, in particular to make sure BOs in VRAM can be accessed by the CPU, e.g. during a page fault. Without this change, TTM could evict other BOs while trying to satisfy the requested placement, even if the evicted BOs were outside of the requested placement range. Doing so didn't free up any space in the requested placement range, so the (potentially high) eviction cost was incurred for no benefit. Nominating for stable because radeon driver changes in 3.17 made this much more noticeable than before. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=84662 Cc: stable@vger.kernel.org Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-10-16drm/ttm: Don't skip fpfn check if lpfn is 0 in ttm_bo_mem_compatMichel Dänzer
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-10-16drm/radeon: use gart memory for DMA ring testsAlex Deucher
Avoids HDP cache flush issues when using vram which can cause ring test failures on certain boards. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Alexander Fyodorov <halcy@yandex.ru> Cc: stable@vger.kernel.org
2014-10-16drm/radeon: fix speaker allocation setupAlex Deucher
If the sad_count is 0, set the hw to stereo and change the error message to a warn. A lot of monitors don't set the speaker allocation block. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2014-10-16drm/radeon: initialize sadb to NULL in the audio codeAlex Deucher
Fixes kfree of the sadb buffer when it's NULL. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-10-17powerpc: Only do dynamic DMA zone limits on platforms that need itMichael Ellerman
Scott's patch 1c98025c6c95 "Dynamic DMA zone limits" changed dma_direct_alloc_coherent() to start using dev->coherent_dma_mask. That seems fair enough, but it exposes the fact that some of the drivers we care about on IBM platforms aren't setting the coherent mask. The proper fix is to have drivers set the coherent mask and also have the platform code honor it. For now, just restrict the dynamic DMA zone limits to the platforms that need it. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Scott Wood <scottwood@freescale.com>
2014-10-16Input: xpad - add Thrustmaster as Xbox 360 controller vendorTommi Rantala
Add Thrustmaster as Xbox 360 controller vendor. This is required for example to make the GP XID (044f:b326) gamepad work. Signed-off-by: Tommi Rantala <tt.rantala@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-10-16Input: xpad - add USB ID for Thrustmaster Ferrari 458 Racing WheelTommi Rantala
Add the USB ID for the Xbox 360 Thrustmaster Ferrari 458 Racing Wheel. Signed-off-by: Tommi Rantala <tt.rantala@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-10-16Input: max77693-haptic - fix state check in imax77693_haptic_disable()Jaewon Kim
The check to see whether the device is already disabled in max77693_haptic_disable() was inversed, this change corrects it. Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-10-16Input: xen-kbdfront - free grant table entry in xenkbd_disconnect_backendChang Huaixin
xenkbd_disconnect_backend doesn't free grant table entry. This bug affects live migration. xenkbd_disconnect_backend uses gnttab_end_foreign_access_ref to handle grant table entry which doesn't really free an entry. Thus every time we do xenkbd_resume, grant table entry increses by one. As an grant table entry occupies 8 bytes, an grant table page has at most 512 entries. Every 512 times we do xenkdb_resume, grant table pages increses by one. After around 3500 times of live migration, grant table pages will increase by 7, causing too many pages to populate and hitting max_pages limit when assigning pages.Thus assign_pages will fail, so will live migration. Signed-off-by: Chang Huaixin <huaixin.chx@alibaba-inc.com> Acked-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-10-16Check minimum response length on query_network_interfaceSteve French
Acked-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Signed-off-by: Steve French <smfrench@gmail.com>
2014-10-16Workaround Mac server problemSteve French
Mac server returns that they support CIFS Unix Extensions but doesn't actually support QUERY_FILE_UNIX_BASIC so mount fails. Workaround this problem by disabling use of Unix CIFS protocol extensions if server returns an EOPNOTSUPP error on QUERY_FILE_UNIX_BASIC during mount. Signed-off-by: Steve French <smfrench@gmail.com>
2014-10-16Remap reserved posix characters by default (part 3/3)Steve French
This is a bigger patch, but its size is mostly due to a single change for how we check for remapping illegal characters in file names - a lot of repeated, small changes to the way callers request converting file names. The final patch in the series does the following: 1) changes default behavior for cifs to be more intuitive. Currently we do not map by default to seven reserved characters, ie those valid in POSIX but not in NTFS/CIFS/SMB3/Windows, unless a mount option (mapchars) is specified. Change this to by default always map and map using the SFM maping (like the Mac uses) unless the server negotiates the CIFS Unix Extensions (like Samba does when mounting with the cifs protocol) when the remapping of the characters is unnecessary. This should help SMB3 mounts in particular since Samba will likely be able to implement this mapping with its new "vfs_fruit" module as it will be doing for the Mac. 2) if the user specifies the existing "mapchars" mount option then use the "SFU" (Microsoft Services for Unix, SUA) style mapping of the seven characters instead. 3) if the user specifies "nomapposix" then disable SFM/MAC style mapping (so no character remapping would be used unless the user specifies "mapchars" on mount as well, as above). 4) change all the places in the code that check for the superblock flag on the mount which is set by mapchars and passed in on all path based operation and change it to use a small function call instead to set the mapping type properly (and check for the mapping type in the cifs unicode functions) Signed-off-by: Steve French <smfrench@gmail.com>
generated by cgit (git 2.34.1) at 2025-09-14 20:55:19 +0000