summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-07-06iwlwifi: add new 8260 PCI IDsOren Givon
Add 3 new 8260 series PCI IDs: - (0x24F3, 0x10B0) - (0x24F3, 0xD0B0) - (0x24F3, 0xB0B0) CC: <stable@vger.kernel.org> [4.1+] Signed-off-by: Oren Givon <oren.givon@intel.com> Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-07-06iwlwifi: mvm: support dqa-enable hcmdLiad Kaufman
Support sending the DQA-enablement HCMD to the FW when working in DQA mode. This HCMD will enable DQA-specific flows in the FW. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-07-06iwlwifi: mvm: update aux queue in dqa modeLiad Kaufman
In DQA mode the AUX queue is mapped elsewhere than in non- DQA mode. Update the code to reflect this. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-07-06iwlwifi: mvm: set sta_id in SCD_QUEUE_CONFIG cmdLiad Kaufman
Set the correct sta_id in the SCD_QUEUE_CONFIG command sent to the FW when enabling/disabling queues. This is needed in DQA-mode to allow the FW to associate between queue and STA. In case the queue isn't connected to a specific station but rather is a static "generic" queue - the sta_id should be set to 0x10 (max supported STA is 0x0f). Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-07-06iwlwifi: mvm: support dqa queue sharingLiad Kaufman
Support DQA queue sharing when no free queue exists for allocation to a STA that already exists. This means that a single queue will serve more than a single TID (although the RA will be the same for all TIDs served). We try to choose the lowest AC possible, to ensure the shared queues have the lowest possible combined AC requirements. The queue to share is chosen only from the same RA's DATA queues as follows (in descending priority): 1. An AC_BE queue 2. Same AC queue 3. Highest AC queue that is lower than new AC 4. Any existing AC (there always is at least 1 DATA queue) If any aggregations existed for any of the TIDs of the shared queue - they are stopped (the FW is notified), but no delBA is sent. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-07-06iwlwifi: mvm: silence uninitialized variable warningDan Carpenter
"max_amsdu_len" isn't set if kstrtouint() fails. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-07-06iwlwifi: mvm: remove an unused variableDan Carpenter
We never initialize ampdu_status so it causes a static checker warning when we pass it to iwl_mvm_pass_packet_to_mac80211(). Fortunately, it's never used so we can just remove it. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-07-06iwlwifi: mvm: change scan timeout to a delayed workLuca Coelho
Some transports may sleep when writing to registers, which is done when calling iwl_force_nmi(). So we can't call iwl_force_nmi() in a timer context. To solve that, convert the scan timeout timer to a delayed work. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-07-06iwlwifi: mvm: fix possible division by zeroSara Sharon
Theoretically we may get only one IRQ from OS, in which case we will have only 1 queue even in MSIx mode. This will cause division by zero in the indirection table calculation. We do not need send the command in that case, as there is only one queue so all RX traffic will be directed to it anyway. Bail out early if there is only one queue. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-07-06iwlwifi: pcie: unify restock calls on initSara Sharon
Currently code calls restock for mq devices during the init function, unlike sq where restock is called after init. This causes an harmless but alarming deadlock warning from lockdep, to fix this - unify the init code. Rename the restock functions while at it. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-07-06iwlwifi: mvm: support dqa queue inactivation upon timeoutLiad Kaufman
Support marking queues as inactive upon a timeout expiring, and allow inactive queues to be re-assigned to other RA/TIDs if no other queue is free. This is done by keeping a timestamp of the latest frame TXed for every RA/TID, and then going over the queues currently in use when a new queue is needed, inactivating all those that are inactive. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-07-05ipv6: Fix mem leak in rt6i_pcpuMartin KaFai Lau
It was first reported and reproduced by Petr (thanks!) in https://bugzilla.kernel.org/show_bug.cgi?id=119581 free_percpu(rt->rt6i_pcpu) used to always happen in ip6_dst_destroy(). However, after fixing a deadlock bug in commit 9c7370a166b4 ("ipv6: Fix a potential deadlock when creating pcpu rt"), free_percpu() is not called before setting non_pcpu_rt->rt6i_pcpu to NULL. It is worth to note that rt6i_pcpu is protected by table->tb6_lock. kmemleak somehow did not report it. We nailed it down by observing the pcpu entries in /proc/vmallocinfo (first suggested by Hannes, thanks!). Signed-off-by: Martin KaFai Lau <kafai@fb.com> Fixes: 9c7370a166b4 ("ipv6: Fix a potential deadlock when creating pcpu rt") Reported-by: Petr Novopashenniy <pety@rusnet.ru> Tested-by: Petr Novopashenniy <pety@rusnet.ru> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Petr Novopashenniy <pety@rusnet.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05net: fix decnet rtnexthop parsingVegard Nossum
dn_fib_count_nhs() could enter an infinite loop if nhp->rtnh_len == 0 (i.e. if userspace passes a malformed netlink message). Let's use the helpers from net/nexthop.h which take care of all this stuff. We can do exactly the same as e.g. fib_count_nexthops() and fib_get_nhs() from net/ipv4/fib_semantics.c. This fixes the softlockup for me. Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-06iwlwifi: change fw.mvm_fw to fw.typeJohannes Berg
Instead of explicitly indicating the difference between just DVM and MVM with an mvm_fw boolean change this to fw.type to be more extensible and easier to understand. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-07-06iwlwifi: remove useless enum valuesJohannes Berg
Since the values of this enum are used only internally, we can let the compiler number them. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-07-05ACPI / debugger: Fix regression introduced by IS_ERR_VALUE() removalLv Zheng
The FIFO unlocking mechanism in acpi_dbg has been broken by the following commit: Commit: 287980e49ffc0f6d911601e7e352a812ed27768e Subject: remove lots of IS_ERR_VALUE abuses It converted !IS_ERR_VALUE(ret) into !ret which was not entirely correct. Fix the regression by taking ret > 0 into account too as appropriate. Fixes: 287980e49ffc (remove lots of IS_ERR_VALUE abuses) Signed-off-by: Lv Zheng <lv.zheng@intel.com> [ rjw: Simplifications, changelog & subject massage ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-05platform/chrome: cros_ec_dev - double fetch bug in ioctlDan Carpenter
We verify "u_cmd.outsize" and "u_cmd.insize" but we need to make sure that those values have not changed between the two copy_from_user() calls. Otherwise it could lead to a buffer overflow. Additionally, cros_ec_cmd_xfer() can set s_cmd->insize to a lower value. We should use the new smaller value so we don't copy too much data to the user. Reported-by: Pengfei Wang <wpengfeinudt@gmail.com> Fixes: a841178445bb ('mfd: cros_ec: Use a zero-length array for command data') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Kees Cook <keescook@chromium.org> Tested-by: Gwendal Grignou <gwendal@chromium.org> Cc: <stable@vger.kernel.org> # v4.2+ Signed-off-by: Olof Johansson <olof@lixom.net>
2016-07-06drm/nouveau/disp/sor/gf119: select correct sor when poking training patternBen Skeggs
Fixes a regression caused by a stupid thinko from "disp/sor/gf119: both links use the same training register". Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org
2016-07-05ACPICA: Namespace: Fix namespace/interpreter lock orderingLv Zheng
There is a lock order issue in acpi_load_tables(). The namespace lock is held before holding the interpreter lock. With ACPI_MUTEX_DEBUG enabled in the kernel, this is printed to the log during boot: [ 0.885699] ACPI Error: Invalid acquire order: Thread 405884224 owns [ACPI_MTX_Namespace], wants [ACPI_MTX_Interpreter] (20160422/utmutex-263) [ 0.885881] ACPI Error: Could not acquire AML Interpreter mutex (20160422/exutils-95) [ 0.893846] ACPI Error: Mutex [0x0] is not acquired, cannot release (20160422/utmutex-326) [ 0.894019] ACPI Error: Could not release AML Interpreter mutex (20160422/exutils-133) The issue has been introduced by the following commit: Commit: 2f38b1b16d9280689e5cfa47a4c50956bf437f0d ACPICA Commit: bfe03ffcde8ed56a7eae38ea0b188aeb12f9c52e Subject: ACPICA: Namespace: Fix a regression that MLC support triggers dead lock in dynamic table loading Which fixed a deadlock issue for acpi_ns_load_table() in acpi_ex_add_table() but didn't take care of the lock order in acpi_ns_load_table() correctly. Originally (before the above commit), ACPICA used the namespace/interpreter locks in the following 2 key code paths: 1. Table loading: acpi_ns_load_table L(Namespace) acpi_ns_parse_table acpi_ns_one_complete_parse U(Namespace) 2. Object evaluation: acpi_ns_evaluate L(Interpreter) acpi_ps_execute_method U(Interpreter) acpi_ns_load_table L(Namespace) U(Namespace) acpi_ev_initialize_region L(Namespace) U(Namespace) address_space.setup L(Namespace) U(Namespace) address_space.handler L(Namespace) U(Namespace) acpi_os_wait_semaphore acpi_os_acquire_mutex acpi_os_sleep L(Interpreter) U(Interpreter) During runtime, while acpi_ns_evaluate is called, the lock order is always Interpreter -> Namespace. In turn, the problematic commit acquires the locks in the following order: 3. Table loading: acpi_ns_load_table L(Namespace) acpi_ns_parse_table L(Interpreter) acpi_ns_one_complete_parse U(Interpreter) U(Namespace) To fix the lock order issue, move the interpreter lock to acpi_ns_load_table() to ensure the lock order correctness: 4. Table loading: acpi_ns_load_table L(Interpreter) L(Namespace) acpi_ns_parse_table acpi_ns_one_complete_parse U(Namespace) U(Interpreter) However, this doesn't fix the current design issues related to the namespace lock. For example, we can notice that in acpi_ns_evaluate(), outside of acpi_ns_load_table(), the namespace objects may be created by the named object creation control methods. And the creation of the method-owned namespace objects are not locked by the namespace lock. This patch doesn't try to fix such kind of existing issues. Fixes: 2f38b1b16d92 (ACPICA: Namespace: Fix a regression that MLC support triggers dead lock in dynamic table loading) Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-05nfs_atomic_open(): prevent parallel nfs_lookup() on a negative hashedAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-07-05Use the right predicate in ->atomic_open() instancesAl Viro
->atomic_open() can be given an in-lookup dentry *or* a negative one found in dcache. Use d_in_lookup() to tell one from another, rather than d_unhashed(). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-07-05qla2xxx: Fix NULL pointer deref in QLA interruptBruno Prémont
In qla24xx_process_response_queue() rsp->msix->cpuid may trigger NULL pointer dereference when rsp->msix is NULL: [ 5.622457] NULL pointer dereference at 0000000000000050 [ 5.622457] IP: [<ffffffff8155e614>] qla24xx_process_response_queue+0x44/0x4b0 [ 5.622457] PGD 0 [ 5.622457] Oops: 0000 [#1] SMP [ 5.622457] Modules linked in: [ 5.622457] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.6.3-x86_64 #1 [ 5.622457] Hardware name: HP ProLiant DL360 G5, BIOS P58 05/02/2011 [ 5.622457] task: ffff8801a88f3740 ti: ffff8801a8954000 task.ti: ffff8801a8954000 [ 5.622457] RIP: 0010:[<ffffffff8155e614>] [<ffffffff8155e614>] qla24xx_process_response_queue+0x44/0x4b0 [ 5.622457] RSP: 0000:ffff8801afb03de8 EFLAGS: 00010002 [ 5.622457] RAX: 0000000000000000 RBX: 0000000000000032 RCX: 00000000ffffffff [ 5.622457] RDX: 0000000000000002 RSI: ffff8801a79bf8c8 RDI: ffff8800c8f7e7c0 [ 5.622457] RBP: ffff8801afb03e68 R08: 0000000000000000 R09: 0000000000000000 [ 5.622457] R10: 00000000ffff8c47 R11: 0000000000000002 R12: ffff8801a79bf8c8 [ 5.622457] R13: ffff8800c8f7e7c0 R14: ffff8800c8f60000 R15: 0000000000018013 [ 5.622457] FS: 0000000000000000(0000) GS:ffff8801afb00000(0000) knlGS:0000000000000000 [ 5.622457] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5.622457] CR2: 0000000000000050 CR3: 0000000001e07000 CR4: 00000000000006e0 [ 5.622457] Stack: [ 5.622457] ffff8801afb03e30 ffffffff810c0f2d 0000000000000086 0000000000000002 [ 5.622457] ffff8801afb03e28 ffffffff816570e1 ffff8800c8994628 0000000000000002 [ 5.622457] ffff8801afb03e60 ffffffff816772d4 b47c472ad6955e68 0000000000000032 [ 5.622457] Call Trace: [ 5.622457] <IRQ> [ 5.622457] [<ffffffff810c0f2d>] ? __wake_up_common+0x4d/0x80 [ 5.622457] [<ffffffff816570e1>] ? usb_hcd_resume_root_hub+0x51/0x60 [ 5.622457] [<ffffffff816772d4>] ? uhci_hub_status_data+0x64/0x240 [ 5.622457] [<ffffffff81560d00>] qla24xx_intr_handler+0xf0/0x2e0 [ 5.622457] [<ffffffff810d569e>] ? get_next_timer_interrupt+0xce/0x200 [ 5.622457] [<ffffffff810c89b4>] handle_irq_event_percpu+0x64/0x100 [ 5.622457] [<ffffffff810c8a77>] handle_irq_event+0x27/0x50 [ 5.622457] [<ffffffff810cb965>] handle_edge_irq+0x65/0x140 [ 5.622457] [<ffffffff8101a498>] handle_irq+0x18/0x30 [ 5.622457] [<ffffffff8101a276>] do_IRQ+0x46/0xd0 [ 5.622457] [<ffffffff817f8fff>] common_interrupt+0x7f/0x7f [ 5.622457] <EOI> [ 5.622457] [<ffffffff81020d38>] ? mwait_idle+0x68/0x80 [ 5.622457] [<ffffffff8102114a>] arch_cpu_idle+0xa/0x10 [ 5.622457] [<ffffffff810c1b97>] default_idle_call+0x27/0x30 [ 5.622457] [<ffffffff810c1d3b>] cpu_startup_entry+0x19b/0x230 [ 5.622457] [<ffffffff810324c6>] start_secondary+0x136/0x140 [ 5.622457] Code: 00 00 65 48 8b 04 25 28 00 00 00 48 89 45 d0 31 c0 48 8b 47 58 a8 02 0f 84 c5 00 00 00 48 8b 46 50 49 89 f4 65 8b 15 34 bb aa 7e <39> 50 50 74 11 89 50 50 48 8b 46 50 8b 40 50 41 89 86 60 8b 00 [ 5.622457] RIP [<ffffffff8155e614>] qla24xx_process_response_queue+0x44/0x4b0 [ 5.622457] RSP <ffff8801afb03de8> [ 5.622457] CR2: 0000000000000050 [ 5.622457] ---[ end trace fa2b19c25106d42b ]--- [ 5.622457] Kernel panic - not syncing: Fatal exception in interrupt The affected code was introduced by commit cdb898c52d1dfad4b4800b83a58b3fe5d352edde (qla2xxx: Add irq affinity notification). Only dereference rsp->msix when it has been set so the machine can boot fine. Possibly rsp->msix is unset because: [ 3.479679] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.33-k. [ 3.481839] qla2xxx [0000:13:00.0]-001d: : Found an ISP2432 irq 17 iobase 0xffffc90000038000. [ 3.484081] qla2xxx [0000:13:00.0]-0035:0: MSI-X; Unsupported ISP2432 (0x2, 0x3). [ 3.485804] qla2xxx [0000:13:00.0]-0037:0: Falling back-to MSI mode -258. [ 3.890145] scsi host0: qla2xxx [ 3.891956] qla2xxx [0000:13:00.0]-00fb:0: QLogic QLE2460 - PCI-Express Single Channel 4Gb Fibre Channel HBA. [ 3.894207] qla2xxx [0000:13:00.0]-00fc:0: ISP2432: PCIe (2.5GT/s x4) @ 0000:13:00.0 hdma+ host#=0 fw=7.03.00 (9496). [ 5.714774] qla2xxx [0000:13:00.0]-500a:0: LOOP UP detected (4 Gbps). Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org> Acked-by: Quinn Tran <quinn.tran@qlogic.com> CC: <stable@vger.kernel.org> # 4.5+ Fixes: cdb898c52d1dfad4b4800b83a58b3fe5d352edde Signed-off-by: James Bottomley <jejb@linux.vnet.ibm.com>
2016-07-05cxgb4: update latest firmware version supportedGanesh Goudar
Change t4fw_version.h to update latest firmware version number Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05net/mlx5: Avoid setting unused var when modifying vport node GUIDOr Gerlitz
GCC complains on unused-but-set-variable, clean this up. Fixes: 23898c763f4a ('net/mlx5: E-Switch, Modify node guid on vf set MAC') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05bonding: fix enslavement slave link notificationsAviv Heller
Currently, link notifications are not sent by bond_set_slave_link_state() upon enslavement if the slave is enslaved when up. This happens because slave->link default init value is 0, which is the same as BOND_LINK_UP, resulting in bond_set_slave_link_state() ignoring this transition. This patch sets the default value of slave->link to BOND_LINK_NOCHANGE, assuring it will count as a state transition and thus trigger notification logic. Signed-off-by: Aviv Heller <avivh@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05net: vrf: Add support for PREROUTING rules on vrf deviceDavid Ahern
Add support for PREROUTING rules with skb->dev set to the vrf device. INPUT rules are already allowed. Provides symmetry with the output path which allows POSTROUTING rules. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05connector: make cn_proc explicitly non-modularPaul Gortmaker
The Kconfig controlling build of this code is currently: drivers/connector/Kconfig:config PROC_EVENTS drivers/connector/Kconfig: bool "Report process events to userspace" ...meaning that it currently is not being built as a module by anyone. Lets remove the two modular references, so that when reading the driver there is no doubt it is builtin-only. Since module_init translates to device_initcall in the non-modular case, the init ordering remains unchanged with this commit. Cc: Evgeniy Polyakov <zbr@ioremap.net> Cc: netdev@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05r8152: fix runtime function for RTL8152hayeswang
The RTL8152 doesn't have U1U2 and U2P3 features, so use different runtime functions for RTL812 and RTL8153 by adding autosuspend_en() to rtl_ops. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05net: hns: fix return value check in hns_dsaf_get_cfg()Wei Yongjun
In case of error, function devm_ioremap_resource() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05Revert "gpio: gpiolib-of: Allow compile testing"Linus Walleij
This reverts commit 1e4a80640338924b9f9fd7a121ac31d08134410a. This creates more problems than it solves right now. Compile testing needs to go in with patches fixing the problems it uncovers. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-05Merge branch 'mlxsw-ipv4-unicast-routing'David S. Miller
Jiri Pirko says: ==================== mlxsw: Implement IPV4 unicast routing This patchset enables IPv4 unicast routing in the Mellanox Spectrum ASIC switch driver. This builds upon the work that was done by a couple of previous patchsets. Patches 1,2,6 add a couple of dependencies outside the driver. Namely, the ability to propagate ndo_neigh_construct()/destroy() through stacked devices and a notification whenever DELAY_PROBE_TIME changes. When propagated down, the ndos allow drivers to add and remove neighbour entries from their private neighbour table. The DELAY_PROBE_TIME notification gives drivers the ability to correctly configure their polling interval for neighbour activity, so that active neighbour won't be marked as STALE. Patches 3-5,7-8 add the neighbour offloading infrastructure, where patch 7 uses the DELAY_PROBE_TIME notification in order to correctly configure the device's polling interval. Patch 8 finally programs neighbours to the device's table based on NEIGH_UPDATE notifications, so that directly connected routes can be used. Patches 9-16 build upon the previous patches and extend the router with remote routes (nexthop) support. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05mlxsw: Add the unresolved next-hops probesYotam Gigi
Now, the driver sends arp probes for all unresolved neighbours that are currently a nexthop for some route on the system. The job is set periodically every 5 seconds. Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05mlxsw: spectrum_router: Add the nexthop neigh activity updateYotam Gigi
For nexthop neighbours we need to make kernel to think there is a traffic flowing to them preventing it from going to stale state. Otherwise kernel would stale it and eventually the neigh would be removed from HW and nexthop as well. That would reduce ECMP group in HW. Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05mlxsw: spectrum_router: Implement next-hop routingJiri Pirko
Implement next-hop routing offload including ECMP. To make it possible, introduce next-hop group entity. This entity keeps track of resolved neighbours and updates HW adjacency table accordingly. Note that HW next-hops are stored in this adjacency table, in form of MAC. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05mlxsw: reg: Add Router Algorithmic LPM ECMP Update RegisterJiri Pirko
The RALEU register is used to mass update remote action adjacency index and ecmp size. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05mlxsw: reg: Add Router Adjacency Table registerYotam Gigi
The RATR register is used to configure the Router Adjacency (next-hop) Table. Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05mlxsw: Introduce simplistic KVD linear area managerJiri Pirko
This is a very simple manager for KVD linear area. Currently, the allocator will either allocate a single entry from pre-defined sub-area, or in case more than one entry is needed, it will allocate 32-entry chunk in other pre-defined sub-area. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05mlxsw: spectrum: Define sizes of KVD areasJiri Pirko
Override the defaults and define the area sizes ourselves. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05mlxsw: Add KVD sizes configuration into profileJiri Pirko
Up until now we only used hash-based tables in the device, but we are going to use the linear table for remote routes adjacency lists. Add the configuration fields that control the size of the linear table. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05mlxsw: spectrum_router: Offload neighbours based on NUD state changeYotam Gigi
Listen to any NEIGH_UPDATE events sent and program the device accordingly. If NUD state is VALID and neighbour isn't yet offloaded, then program it into the device's table. Otherwise, just edit its parameters. If NUD state machine transitioned neighbour out of VALID state and it's present in the device's table, then remove it. Note that the device is programmed in delayed work, as the netevent notification chain is atomic and prevents us from going to sleep. Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05mlxsw: spectrum_router: Periodically update the kernel's neigh tableYotam Gigi
As previously explained, the driver should periodically poll the device for neighbours activity according to the configured DELAY_PROBE_TIME. This will prevent active neighbours from staying in STALE state for long periods of time. During init configure the polling interval according to the DELAY_PROBE_TIME used in the default table. In addition, register a netevent notification block, so that the interval is updated whenever DELAY_PROBE_TIME changes. Using the computed interval schedule a delayed work, which will update the kernel via neigh_event_send() on any active neighbour since the last delayed work. Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05neigh: Send a notification when DELAY_PROBE_TIME changesIdo Schimmel
When the data plane is offloaded the traffic doesn't go through the networking stack. Therefore, after first resolving a neighbour the NUD state machine will transition it from REACHABLE to STALE until it's finally deleted by the garbage collector. To prevent such situations the offloading driver should notify the NUD state machine on any neighbours that were recently used. The driver's polling interval should be set so that the NUD state machine can function as if the traffic wasn't offloaded. Currently, there are no in-tree drivers that can report confirmation for a neighbour, but only 'used' indication. Therefore, the polling interval should be set according to DELAY_FIRST_PROBE_TIME, as a neighbour will transition from REACHABLE state to DELAY (instead of STALE) if "a packet was sent within the last DELAY_FIRST_PROBE_TIME seconds" (RFC 4861). Send a netevent whenever the DELAY_FIRST_PROBE_TIME changes - either via netlink or sysctl - so that offloading drivers can correctly set their polling interval. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05mlxsw: reg: Add Router Algorithmic LPM Unicast Host Table Dump registerYotam Gigi
The RAUHTD register allows dumping entries from the Router Unicast Host Table. Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05mlxsw: reg: Add Router Algorithmic LPM Unicast Host Table registerYotam Gigi
The RAUHT register is used to configure and query the Unicast Host Table in devices that implement the Algorithmic LPM. In other words, it is used to configure neighbour entries in the device. Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05mlxsw: spectrum_router: Add private neigh tableJiri Pirko
We need to hold some private data for every neigh entry. It would be possible to do it using neigh_priv_len/ndo_neigh_construct/ ndo_neigh_destroy however only for the port device itself. That would not work for stacked devices like bridge/team/bond. So introduce a private neigh table. Hook onto ndos neigh_construct/destroy and add/remove table entry according to that. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05net: introduce default neigh_construct/destroy ndo calls for L2 upper devicesJiri Pirko
L2 upper device needs to propagate neigh_construct/destroy calls down to lower devices. Do this by defining default ndo functions and use them in team, bond, bridge and vlan. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05net: add dev arg to ndo_neigh_construct/destroyJiri Pirko
As the following patch will allow upper devices to follow the call down lower devices, we need to add dev here and not rely on n->dev. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-06i2c: mux: reg: wrong condition checked for of_address_to_resource return valueLukasz Gemborowski
of_address_to_resource return 0 on successful call but devm_ioremap_resource is called only if it returns non-zero value Signed-off-by: Lukasz Gemborowski <lukasz.gemborowski@nokia.com> Reviewed-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2016-07-06i2c: tegra: Correct error path in probeJon Hunter
Commit 497fbe24987b ("i2c: tegra: enable multi master mode for tegra210") enables the Tegra I2C 'div_clk' for adapters using the multi-master mode during the device probe. Although the probe error path was updated to disable the clock on probe failure, there is one place after calling tegra_i2c_init() where the clock will not be disabled on failure. Correct the error path so that the 'div_clk' is disabled if calling tegra_i2c_init() fails. Fixes: 497fbe24987b ("i2c: tegra: enable multi master mode for tegra210") Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-07-05irqchip/mips-gic: Match IPI IRQ domain by bus token onlyPaul Burton
Commit fbde2d7d8290 ("MIPS: Add generic SMP IPI support") introduced code which calls irq_find_matching_host with a NULL node parameter in order to discover IPI IRQ domains which are not associated with the DT root node's interrupt parent. This suggests that implementations of IPI IRQ domains should effectively ignore the node parameter if it is NULL and search purely based upon the bus token. Commit 2af70a962070 ("irqchip/mips-gic: Add a IPI hierarchy domain") did not do this when implementing the GIC IPI IRQ domain, and on MIPS Boston boards this leads to no IPI domain being discovered and a NULL pointer dereference when attempting to send an IPI: CPU 0 Unable to handle kernel paging request at virtual address 0000000000000040, epc == ffffffff8016e70c, ra == ffffffff8010ff5c Oops[#1]: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.7.0-rc6-00223-gad0d1b6 #945 task: a8000000ff066fc0 ti: a8000000ff068000 task.ti: a8000000ff068000 $ 0 : 0000000000000000 0000000000000001 ffffffff80730000 0000000000000003 $ 4 : 0000000000000000 ffffffff8057e5b0 a800000001e3ee00 0000000000000000 $ 8 : 0000000000000000 0000000000000023 0000000000000001 0000000000000001 $12 : 0000000000000000 ffffffff803323d0 0000000000000000 0000000000000000 $16 : 0000000000000000 0000000000000000 0000000000000001 ffffffff801108fc $20 : 0000000000000000 ffffffff8057e5b0 0000000000000001 0000000000000000 $24 : 0000000000000000 ffffffff8012de28 $28 : a8000000ff068000 a8000000ff06fbc0 0000000000000000 ffffffff8010ff5c Hi : ffffffff8014c174 Lo : a800000001e1e140 epc : ffffffff8016e70c __ipi_send_mask+0x24/0x11c ra : ffffffff8010ff5c mips_smp_send_ipi_mask+0x68/0x178 Status: 140084e2 KX SX UX KERNEL EXL Cause : 00800008 (ExcCode 02) BadVA : 0000000000000040 PrId : 0001a920 (MIPS I6400) Process swapper/0 (pid: 1, threadinfo=a8000000ff068000, task=a8000000ff066fc0, tls=0000000000000000) Stack : 0000000000000000 0000000000000000 0000000000000001 ffffffff801108fc 0000000000000000 ffffffff8057e5b0 0000000000000001 ffffffff8010ff5c 0000000000000001 0000000000000020 0000000000000000 0000000000000000 0000000000000000 ffffffff801108fc 0000000000000000 0000000000000001 0000000000000001 0000000000000000 0000000000000000 ffffffff801865e8 a8000000ff0c7500 a8000000ff06fc90 0000000000000001 0000000000000002 ffffffff801108fc ffffffff801868b8 0000000000000000 ffffffff801108fc 0000000000000000 0000000000000003 ffffffff8068c700 0000000000000001 ffffffff80730000 0000000000000001 a8000000ff00a290 ffffffff80110c50 0000000000000003 a800000001e48308 0000000000000003 0000000000000008 ... Call Trace: [<ffffffff8016e70c>] __ipi_send_mask+0x24/0x11c [<ffffffff8010ff5c>] mips_smp_send_ipi_mask+0x68/0x178 [<ffffffff801865e8>] generic_exec_single+0x150/0x170 [<ffffffff801868b8>] smp_call_function_single+0x108/0x160 [<ffffffff80110c50>] cps_boot_secondary+0x328/0x394 [<ffffffff80110534>] __cpu_up+0x38/0x90 [<ffffffff8012de4c>] bringup_cpu+0x24/0xac [<ffffffff8012df40>] cpuhp_up_callbacks+0x58/0xdc [<ffffffff8012e648>] cpu_up+0x118/0x18c [<ffffffff806dc158>] smp_init+0xbc/0xe8 [<ffffffff806d4c18>] kernel_init_freeable+0xa0/0x228 [<ffffffff8056c908>] kernel_init+0x10/0xf0 [<ffffffff80105098>] ret_from_kernel_thread+0x14/0x1c Fix this by allowing the GIC IPI IRQ domain to match purely based upon the bus token if the node provided is NULL. Fixes: 2af70a962070 ("irqchip/mips-gic: Add a IPI hierarchy domain") Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Jason Cooper <jason@lakedaemon.net> Cc: Qais Yousef <qsyousef@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20160705132600.27730-2-paul.burton@imgtec.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
generated by cgit (git 2.34.1) at 2025-10-01 22:53:12 +0000