summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-06-22ice: clean up freeing SR-IOV VFsPrzemek Kitszel
The check for existing VFs was redundant since very inception of SR-IOV sysfs interface in the kernel, see commit 1789382a72a5 ("PCI: SRIOV control and status via sysfs"). Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-06-22ice: allow hot-swapping XDP programsMaciej Fijalkowski
Currently ice driver's .ndo_bpf callback brings interface down and up independently of XDP resources' presence. This is only needed when either these resources have to be configured or removed. It means that if one is switching XDP programs on-the-fly with running traffic, packets will be dropped. To avoid this, compare early on ice_xdp_setup_prog() state of incoming bpf_prog pointer vs the bpf_prog pointer that is already assigned to VSI. Do the swap in case VSI has bpf_prog and incoming one are non-NULL. Lastly, while at it, put old bpf_prog *after* the update of Rx ring's bpf_prog pointer. In theory previous code could expose us to a state where Rx ring's bpf_prog would still be referring to old_prog that got released with earlier bpf_prog_put(). Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-06-22ice: reduce initial wait for control queue messagesJacob Keller
The ice_sq_send_cmd() function is used to send messages to the control queues used to communicate with firmware, virtual functions, and even some hardware. When sending a control queue message, the driver is designed to synchronously wait for a response from the queue. Currently it waits between checks for 100 to 150 microseconds. Commit f86d6f9c49f6 ("ice: sleep, don't busy-wait, for ICE_CTL_Q_SQ_CMD_TIMEOUT") did recently change the behavior from an unnecessary delay into a sleep which is a significant improvement over the old behavior of polling using udelay. Because of the nature of PCIe transactions, the hardware won't be informed about a new message until the write to the tail register posts. This is only guaranteed to occur at the next register read. In ice_sq_send_cmd(), this happens at the ice_sq_done() call. Because of this, the driver essentially forces a minimum of one full wait time regardless of how fast the response is. For the hardware-based sideband queue, this is especially slow. It is expected that the hardware will respond within 2 or 3 microseconds, an order of magnitude faster than the 100-150 microsecond sleep. Allow such fast completions to occur without delay by introducing a small 5 microsecond delay first before entering the sleeping timeout loop. Ensure the tail write has been posted by using ice_flush(hw) first. While at it, lets also remove the ICE_CTL_Q_SQ_CMD_USEC macro as it obscures the sleep time in the inner loop. It was likely introduced to avoid "magic numbers", but in practice sleep and delay values are easier to read and understand when using actual numbers instead of a named constant. This change should allow the fast hardware based control queue messages to complete quickly without delay, while slower firmware queue response times will sleep while waiting for the response. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Michal Schmidt <mschmidt@redhat.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-06-22spi: dt-bindings: stm32: do not disable spi-slave property for stm32f4-f7Valentin Caron
STM32F4-F7 are, from hardware point of view, capable to handle device mode. So this property should not be forced at false in dt-bindings. Signed-off-by: Valentin Caron <valentin.caron@foss.st.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/Message-Id: <20230621115523.923176-3-valentin.caron@foss.st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2023-06-22iavf: make functions static where possiblePrzemek Kitszel
Make all possible functions static. Move iavf_force_wb() up to avoid forward declaration. Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-06-22iavf: remove some unused functions and pointless wrappersPrzemek Kitszel
Remove iavf_aq_get_rss_lut(), iavf_aq_get_rss_key(), iavf_vf_reset(). Remove some "OS specific memory free for shared code" wrappers ;) Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-06-22iavf: fix err handling for MAC replacePrzemek Kitszel
Defer removal of current primary MAC until a replacement is successfully added. Previous implementation would left filter list with no primary MAC. This was found while reading the code. The patch takes advantage of the fact that there can only be a single primary MAC filter at any time ([1] by Piotr) Piotr has also applied some review suggestions during our internal patch submittal process. [1] https://lore.kernel.org/netdev/20230614145302.902301-2-piotrx.gardocki@intel.com/ Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Piotr Gardocki <piotrx.gardocki@intel.com> Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-06-22ACPI: video: Add backlight=native DMI quirk for Dell Studio 1569Hans de Goede
The Dell Studio 1569 predates Windows 8, so it defaults to using acpi_video# for backlight control, but this is non functional on this model. Add a DMI quirk to use the native intel_backlight interface which does work properly. Reported-by: raycekarneal <raycekarneal@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-06-22igc: Work around HW bug causing missing timestampsVinicius Costa Gomes
There's an hardware issue that can cause missing timestamps. The bug is that the interrupt is only cleared if the IGC_TXSTMPH_0 register is read. The bug can cause a race condition if a timestamp is captured at the wrong time, and we will miss that timestamp. To reduce the time window that the problem is able to happen, in case no timestamp was ready, we read the "previous" value of the timestamp registers, and we compare with the "current" one, if it didn't change we can be reasonably sure that no timestamp was captured. If they are different, we use the new value as the captured timestamp. The HW bug is not easy to reproduce, got to reproduce it when smashing the NIC with timestamping requests from multiple applications (e.g. multiple ntpperf instances + ptp4l), after 10s of minutes. This workaround has more impact when multiple timestamp registers are used, and the IGC_TXSTMPH_0 register always need to be read, so the interrupt is cleared. Fixes: 2c344ae24501 ("igc: Add support for TX timestamping") Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-06-22igc: Retrieve TX timestamp during interrupt handlingVinicius Costa Gomes
When the interrupt is handled, the TXTT_0 bit in the TSYNCTXCTL register should already be set and the timestamp value already loaded in the appropriate register. This simplifies the handling, and reduces the latency for retrieving the TX timestamp, which increase the amount of TX timestamps that can be handled in a given time period. As the "work" function doesn't run in a workqueue anymore, rename it to something more sensible, a event handler. Using ntpperf[1] we can see the following performance improvements: Before: $ sudo ./ntpperf -i enp3s0 -m 10:22:22:22:22:21 -d 192.168.1.3 -s 172.18.0.0/16 -I -H -o -37 | responses | TX timestamp offset (ns) rate clients | lost invalid basic xleave | min mean max stddev 1000 100 0.00% 0.00% 0.00% 100.00% -56 +9 +52 19 1500 150 0.00% 0.00% 0.00% 100.00% -40 +30 +75 22 2250 225 0.00% 0.00% 0.00% 100.00% -11 +29 +72 15 3375 337 0.00% 0.00% 0.00% 100.00% -18 +40 +88 22 5062 506 0.00% 0.00% 0.00% 100.00% -19 +23 +77 15 7593 759 0.00% 0.00% 0.00% 100.00% +7 +47 +5168 43 11389 1138 0.00% 0.00% 0.00% 100.00% -11 +41 +5240 39 17083 1708 0.00% 0.00% 0.00% 100.00% +19 +60 +5288 50 25624 2562 0.00% 0.00% 0.00% 100.00% +1 +56 +5368 58 38436 3843 0.00% 0.00% 0.00% 100.00% -84 +12 +8847 66 57654 5765 0.00% 0.00% 100.00% 0.00% 86481 8648 0.00% 0.00% 100.00% 0.00% 129721 12972 0.00% 0.00% 100.00% 0.00% 194581 16384 0.00% 0.00% 100.00% 0.00% 291871 16384 27.35% 0.00% 72.65% 0.00% 437806 16384 50.05% 0.00% 49.95% 0.00% After: $ sudo ./ntpperf -i enp3s0 -m 10:22:22:22:22:21 -d 192.168.1.3 -s 172.18.0.0/16 -I -H -o -37 | responses | TX timestamp offset (ns) rate clients | lost invalid basic xleave | min mean max stddev 1000 100 0.00% 0.00% 0.00% 100.00% -44 +0 +61 19 1500 150 0.00% 0.00% 0.00% 100.00% -6 +39 +81 16 2250 225 0.00% 0.00% 0.00% 100.00% -22 +25 +69 15 3375 337 0.00% 0.00% 0.00% 100.00% -28 +15 +56 14 5062 506 0.00% 0.00% 0.00% 100.00% +7 +78 +143 27 7593 759 0.00% 0.00% 0.00% 100.00% -54 +24 +144 47 11389 1138 0.00% 0.00% 0.00% 100.00% -90 -33 +28 21 17083 1708 0.00% 0.00% 0.00% 100.00% -50 -2 +35 14 25624 2562 0.00% 0.00% 0.00% 100.00% -62 +7 +66 23 38436 3843 0.00% 0.00% 0.00% 100.00% -33 +30 +5395 36 57654 5765 0.00% 0.00% 100.00% 0.00% 86481 8648 0.00% 0.00% 100.00% 0.00% 129721 12972 0.00% 0.00% 100.00% 0.00% 194581 16384 19.50% 0.00% 80.50% 0.00% 291871 16384 35.81% 0.00% 64.19% 0.00% 437806 16384 55.40% 0.00% 44.60% 0.00% [1] https://github.com/mlichvar/ntpperf Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-06-22igc: Check if hardware TX timestamping is enabled earlierVinicius Costa Gomes
Before requesting a packet transmission to be hardware timestamped, check if the user has TX timestamping enabled. Fixes an issue that if a packet was internally forwarded to the NIC, and it had the SKBTX_HW_TSTAMP flag set, the driver would mark that timestamp as skipped. In reality, that timestamp was "not for us", as TX timestamp could never be enabled in the NIC. Checking if the TX timestamping is enabled earlier has a secondary effect that when TX timestamping is disabled, there's no need to check for timestamp timeouts. We should only take care to free any pending timestamp when TX timestamping is disabled, as that skb would never be released otherwise. Fixes: 2c344ae24501 ("igc: Add support for TX timestamping") Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-06-22igc: Fix race condition in PTP tx codeVinicius Costa Gomes
Currently, the igc driver supports timestamping only one tx packet at a time. During the transmission flow, the skb that requires hardware timestamping is saved in adapter->ptp_tx_skb. Once hardware has the timestamp, an interrupt is delivered, and adapter->ptp_tx_work is scheduled. In igc_ptp_tx_work(), we read the timestamp register, update adapter->ptp_tx_skb, and notify the network stack. While the thread executing the transmission flow (the user process running in kernel mode) and the thread executing ptp_tx_work don't access adapter->ptp_tx_skb concurrently, there are two other places where adapter->ptp_tx_skb is accessed: igc_ptp_tx_hang() and igc_ptp_suspend(). igc_ptp_tx_hang() is executed by the adapter->watchdog_task worker thread which runs periodically so it is possible we have two threads accessing ptp_tx_skb at the same time. Consider the following scenario: right after __IGC_PTP_TX_IN_PROGRESS is set in igc_xmit_frame_ring(), igc_ptp_tx_hang() is executed. Since adapter->ptp_tx_start hasn't been written yet, this is considered a timeout and adapter->ptp_tx_skb is cleaned up. This patch fixes the issue described above by adding the ptp_tx_lock to protect access to ptp_tx_skb and ptp_tx_start fields from igc_adapter. Since igc_xmit_frame_ring() called in atomic context by the networking stack, ptp_tx_lock is defined as a spinlock, and the irq safe variants of lock/unlock are used. With the introduction of the ptp_tx_lock, the __IGC_PTP_TX_IN_PROGRESS flag doesn't provide much of a use anymore so this patch gets rid of it. Fixes: 2c344ae24501 ("igc: Add support for TX timestamping") Signed-off-by: Andre Guedes <andre.guedes@intel.com> Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-06-22block: don't return -EINVAL for not found names in devt_from_devnameChristoph Hellwig
When we didn't find a device and didn't guess it might be a partition, it might still show up later, so don't disable rootwait for it by returning -EINVAL. Fixes: 079caa35f786 ("init: clear root_wait on all invalid root= strings") Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230622150644.600327-1-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-22btrfs: fix remaining u32 overflows when left shifting stripe_nrQu Wenruo
There was regression caused by a97699d1d610 ("btrfs: replace map_lookup->stripe_len by BTRFS_STRIPE_LEN") and supposedly fixed by a7299a18a179 ("btrfs: fix u32 overflows when left shifting stripe_nr"). To avoid code churn the fix was open coding the type casts but unfortunately missed one which was still possible to hit [1]. The missing place was assignment of bioc->full_stripe_logical inside btrfs_map_block(). Fix it by adding a helper that does the safe calculation of the offset and use it everywhere even though it may not be strictly necessary due to already using u64 types. This replaces all remaining "<< BTRFS_STRIPE_LEN_SHIFT" calls. [1] https://lore.kernel.org/linux-btrfs/20230622065438.86402-1-wqu@suse.com/ Fixes: a7299a18a179 ("btrfs: fix u32 overflows when left shifting stripe_nr") Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> [ update changelog ] Signed-off-by: David Sterba <dsterba@suse.com>
2023-06-22spi: Create a helper to derive adaptive timeoutsMiquel Raynal
Big transfers might take a bit of time, too constraining timeouts might lead to false positives. In order to simplify the drivers work and with the goal of factorizing code in mind, let's add a helper that can be used by any spi controller driver to derive a relevant per-transfer timeout value. The logic is simple: we know how much time it would take to transfer a byte, we can easily derive the total theoretical amount of time involved for each transfer. We multiply it by two to have a bit of margin and enforce a minimum of 500ms. Suggested-by: Mark Brown <broonie@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/Message-Id: <20230622090634.3411468-2-miquel.raynal@bootlin.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2023-06-22cdrom: Fix spectre-v1 gadgetJordy Zomer
This patch fixes a spectre-v1 gadget in cdrom. The gadget could be triggered by speculatively bypassing the cdi->capacity check. Signed-off-by: Jordy Zomer <jordyzomer@google.com> Link: https://lore.kernel.org/all/20230612110040.849318-2-jordyzomer@google.com Reviewed-by: Phillip Potter <phil@philpotter.co.uk> Link: https://lore.kernel.org/all/ZI1+1OG9Ut1MqsUC@equinox Signed-off-by: Phillip Potter <phil@philpotter.co.uk> Link: https://lore.kernel.org/r/20230617113828.1230-2-phil@philpotter.co.uk Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-22block: make sure local irq is disabled when calling __blkcg_rstat_flushMing Lei
When __blkcg_rstat_flush() is called from cgroup_rstat_flush*() code path, interrupt is always disabled. When we start to flush blkcg per-cpu stats list in __blkg_release() for avoiding to leak blkcg_gq's reference in commit 20cb1c2fb756 ("blk-cgroup: Flush stats before releasing blkcg_gq"), local irq isn't disabled yet, then lockdep warning may be triggered because the dependent cgroup locks may be acquired from irq(soft irq) handler. Fix the issue by disabling local irq always. Fixes: 20cb1c2fb756 ("blk-cgroup: Flush stats before releasing blkcg_gq") Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com> Closes: https://lore.kernel.org/linux-block/pz2wzwnmn5tk3pwpskmjhli6g3qly7eoknilb26of376c7kwxy@qydzpvt6zpis/T/#u Cc: stable@vger.kernel.org Cc: Jay Shin <jaeshin@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Waiman Long <longman@redhat.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Waiman Long <longman@redhat.com> Link: https://lore.kernel.org/r/20230622084249.1208005-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-22erofs: clean up zmap.cGao Xiang
Several trivial cleanups which aren't quite necessary to split: - Rename lcluster load functions as well as justify full indexes since they are typically used for global deduplication for compressed data; - Avoid unnecessary lines, comments for simplicity. No logic changes. Reviewed-by: Guo Xuenan <guoxuenan@huaweicloud.com> Reviewed-by: Yue Hu <huyue2@coolpad.com> Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com> Link: https://lore.kernel.org/r/20230615064421.103178-1-hsiangkao@linux.alibaba.com
2023-06-22erofs: remove unnecessary gotoYangtao Li
It's redundant, let's remove it. Signed-off-by: Yangtao Li <frank.li@vivo.com> Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com> Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com> Link: https://lore.kernel.org/r/20230615034539.14286-1-frank.li@vivo.com Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
2023-06-22erofs: Fix detection of atomic contextSandeep Dhavale
Current check for atomic context is not sufficient as z_erofs_decompressqueue_endio can be called under rcu lock from blk_mq_flush_plug_list(). See the stacktrace [1] In such case we should hand off the decompression work for async processing rather than trying to do sync decompression in current context. Patch fixes the detection by checking for rcu_read_lock_any_held() and while at it use more appropriate !in_task() check than in_atomic(). Background: Historically erofs would always schedule a kworker for decompression which would incur the scheduling cost regardless of the context. But z_erofs_decompressqueue_endio() may not always be in atomic context and we could actually benefit from doing the decompression in z_erofs_decompressqueue_endio() if we are in thread context, for example when running with dm-verity. This optimization was later added in patch [2] which has shown improvement in performance benchmarks. ============================================== [1] Problem stacktrace [name:core&]BUG: sleeping function called from invalid context at kernel/locking/mutex.c:291 [name:core&]in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 1615, name: CpuMonitorServi [name:core&]preempt_count: 0, expected: 0 [name:core&]RCU nest depth: 1, expected: 0 CPU: 7 PID: 1615 Comm: CpuMonitorServi Tainted: G S W OE 6.1.25-android14-5-maybe-dirty-mainline #1 Hardware name: MT6897 (DT) Call trace: dump_backtrace+0x108/0x15c show_stack+0x20/0x30 dump_stack_lvl+0x6c/0x8c dump_stack+0x20/0x48 __might_resched+0x1fc/0x308 __might_sleep+0x50/0x88 mutex_lock+0x2c/0x110 z_erofs_decompress_queue+0x11c/0xc10 z_erofs_decompress_kickoff+0x110/0x1a4 z_erofs_decompressqueue_endio+0x154/0x180 bio_endio+0x1b0/0x1d8 __dm_io_complete+0x22c/0x280 clone_endio+0xe4/0x280 bio_endio+0x1b0/0x1d8 blk_update_request+0x138/0x3a4 blk_mq_plug_issue_direct+0xd4/0x19c blk_mq_flush_plug_list+0x2b0/0x354 __blk_flush_plug+0x110/0x160 blk_finish_plug+0x30/0x4c read_pages+0x2fc/0x370 page_cache_ra_unbounded+0xa4/0x23c page_cache_ra_order+0x290/0x320 do_sync_mmap_readahead+0x108/0x2c0 filemap_fault+0x19c/0x52c __do_fault+0xc4/0x114 handle_mm_fault+0x5b4/0x1168 do_page_fault+0x338/0x4b4 do_translation_fault+0x40/0x60 do_mem_abort+0x60/0xc8 el0_da+0x4c/0xe0 el0t_64_sync_handler+0xd4/0xfc el0t_64_sync+0x1a0/0x1a4 [2] Link: https://lore.kernel.org/all/20210317035448.13921-1-huangjianan@oppo.com/ Reported-by: Will Shiu <Will.Shiu@mediatek.com> Suggested-by: Gao Xiang <xiang@kernel.org> Signed-off-by: Sandeep Dhavale <dhavale@google.com> Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com> Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com> Link: https://lore.kernel.org/r/20230621220848.3379029-1-dhavale@google.com Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
2023-06-22s390/defconfigs: set CONFIG_NET_TC_SKB_EXT=yNiklas Schnelle
As made explicit by commit 03a283cdc8c8 ("net/mlx5: Kconfig: Make tc offload depend on tc skb extension") tc skb extension is required for offloading tc as well as bridges on switchdev capable ConnectX devices. Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2023-06-22Merge tag 'nf-23-06-21' of ↵Paolo Abeni
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf Pablo Neira Ayuso says: ==================== Netfilter/IPVS fixes for net This is v3, including a crash fix for patch 01/14. The following patchset contains Netfilter/IPVS fixes for net: 1) Fix UDP segmentation with IPVS tunneled traffic, from Terin Stock. 2) Fix chain binding transaction logic, add a bound flag to rule transactions. Remove incorrect logic in nft_data_hold() and nft_data_release(). 3) Add a NFT_TRANS_PREPARE_ERROR deactivate state to deal with releasing the set/chain as a follow up to 1240eb93f061 ("netfilter: nf_tables: incorrect error path handling with NFT_MSG_NEWRULE") 4) Drop map element references from preparation phase instead of set destroy path, otherwise bogus EBUSY with transactions such as: flush chain ip x y delete chain ip x w where chain ip x y contains jump/goto from set elements. 5) Pipapo set type does not regard generation mask from the walk iteration. 6) Fix reference count underflow in set element reference to stateful object. 7) Several patches to tighten the nf_tables API: - disallow set element updates of bound anonymous set - disallow unbound anonymous set/chain at the end of transaction. - disallow updates of anonymous set. - disallow timeout configuration for anonymous sets. 8) Fix module reference leak in chain updates. 9) Fix nfnetlink_osf module autoload. 10) Fix deletion of basechain when NFTA_CHAIN_HOOK is specified as in iptables-nft. This Netfilter batch is larger than usual at this stage, I am aware we are fairly late in the -rc cycle, if you prefer to route them through net-next, please let me know. netfilter pull request 23-06-21 * tag 'nf-23-06-21' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nf_tables: Fix for deleting base chains with payload netfilter: nfnetlink_osf: fix module autoload netfilter: nf_tables: drop module reference after updating chain netfilter: nf_tables: disallow timeout for anonymous sets netfilter: nf_tables: disallow updates of anonymous sets netfilter: nf_tables: reject unbound chain set before commit phase netfilter: nf_tables: reject unbound anonymous set before commit phase netfilter: nf_tables: disallow element updates of bound anonymous sets netfilter: nf_tables: fix underflow in object reference counter netfilter: nft_set_pipapo: .walk does not deal with generations netfilter: nf_tables: drop map element references from preparation phase netfilter: nf_tables: add NFT_TRANS_PREPARE_ERROR to deal with bound set/chain netfilter: nf_tables: fix chain binding transaction logic ipvs: align inner_mac_header for encapsulation ==================== Link: https://lore.kernel.org/r/20230621100731.68068-1-pablo@netfilter.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-06-22s390/cpum_cf: rework PER_CPU_DEFINE of struct cpu_cf_eventsThomas Richter
Struct cpu_cf_events is a large data structure and is statically defined for each possible CPU. Rework this and replace it by dynamically allocated data structures created when a perf_event_open() system call is invoked or an access via character device /dev/hwctr takes place. It is replaced by an array of pointers to all possible CPUs and reference counting. The array of pointers is allocated when the first event is created. For each online CPU an event is installed on, a struct cpu_cf_events is allocated and a pointer to struct cpu_cf_events is stored in the array: CPU 0 1 2 3 ... N +---+---+---+---+---+---+ cpu_cf_root::cpucf--> | * | | | |...| | +-|-+---+---+---+---+---+ | | \|/ +-------------+ |cpu_cf_events| | | +-------------+ With this approach the large data structure is only allocated when an event is actually installed and used. Also implement proper reference counting for allocation and removal. During interrupt processing make sure the pointer to cpu_cf_events is valid. The interrupt handler is shared and might be called when no event is active. This requires checking for a valid pointer to struct cpu_cf_events. When the pointer to the per-cpu cpu_cf_events is NULL, simply return. Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2023-06-22selftests/bpf: Fix compilation failure for prog vrf_socket_lookupYonghong Song
When building the latest kernel/selftest with clang17 compiler: make LLVM=1 -j <== for kernel make -C tools/testing/selftests/bpf LLVM=1 -j <== for selftest I hit the following compilation error: [...] In file included from progs/vrf_socket_lookup.c:3: In file included from /usr/include/linux/ip.h:21: In file included from /usr/include/asm/byteorder.h:5: In file included from /usr/include/linux/byteorder/little_endian.h:13: /usr/include/linux/swab.h:136:8: error: unknown type name '__always_inline' 136 | static __always_inline unsigned long __swab(const unsigned long y) | ^ /usr/include/linux/swab.h:171:8: error: unknown type name '__always_inline' 171 | static __always_inline __u16 __swab16p(const __u16 *p) | ^ /usr/include/linux/swab.h:171:29: error: expected ';' after top level declarator 171 | static __always_inline __u16 __swab16p(const __u16 *p) | ^ [...] Basically, with header files in my local host which is based on 5.12 kernel, __always_inline is not defined and this caused compilation failure. Since __always_inline is defined in bpf_helpers.h, let us move bpf_helpers.h to an early position which fixed the problem. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20230622061921.816772-1-yhs@fb.com
2023-06-22revert "net: align SO_RCVMARK required privileges with SO_MARK"Maciej Żenczykowski
This reverts commit 1f86123b9749 ("net: align SO_RCVMARK required privileges with SO_MARK") because the reasoning in the commit message is not really correct: SO_RCVMARK is used for 'reading' incoming skb mark (via cmsg), as such it is more equivalent to 'getsockopt(SO_MARK)' which has no priv check and retrieves the socket mark, rather than 'setsockopt(SO_MARK) which sets the socket mark and does require privs. Additionally incoming skb->mark may already be visible if sysctl_fwmark_reflect and/or sysctl_tcp_fwmark_accept are enabled. Furthermore, it is easier to block the getsockopt via bpf (either cgroup setsockopt hook, or via syscall filters) then to unblock it if it requires CAP_NET_RAW/ADMIN. On Android the socket mark is (among other things) used to store the network identifier a socket is bound to. Setting it is privileged, but retrieving it is not. We'd like unprivileged userspace to be able to read the network id of incoming packets (where mark is set via iptables [to be moved to bpf])... An alternative would be to add another sysctl to control whether setting SO_RCVMARK is privilged or not. (or even a MASK of which bits in the mark can be exposed) But this seems like over-engineering... Note: This is a non-trivial revert, due to later merged commit e42c7beee71d ("bpf: net: Consider has_current_bpf_ctx() when testing capable() in sk_setsockopt()") which changed both 'ns_capable' into 'sockopt_ns_capable' calls. Fixes: 1f86123b9749 ("net: align SO_RCVMARK required privileges with SO_MARK") Cc: Larysa Zaremba <larysa.zaremba@intel.com> Cc: Simon Horman <simon.horman@corigine.com> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Eyal Birger <eyal.birger@gmail.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Eric Dumazet <edumazet@google.com> Cc: Patrick Rohr <prohr@google.com> Signed-off-by: Maciej Żenczykowski <maze@google.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20230618103130.51628-1-maze@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-06-22net: wwan: iosm: Convert single instance struct member to flexible arrayKees Cook
struct mux_adth actually ends with multiple struct mux_adth_dg members. This is seen both in the comments about the member: /** * struct mux_adth - Structure of the Aggregated Datagram Table Header. ... * @dg: datagramm table with variable length */ and in the preparation for populating it: adth_dg_size = offsetof(struct mux_adth, dg) + ul_adb->dg_count[i] * sizeof(*dg); ... adth_dg_size -= offsetof(struct mux_adth, dg); memcpy(&adth->dg, ul_adb->dg[i], adth_dg_size); This was reported as a run-time false positive warning: memcpy: detected field-spanning write (size 16) of single field "&adth->dg" at drivers/net/wwan/iosm/iosm_ipc_mux_codec.c:852 (size 8) Adjust the struct mux_adth definition and associated sizeof() math; no binary output differences are observed in the resulting object file. Reported-by: Florian Klink <flokli@flokli.de> Closes: https://lore.kernel.org/lkml/dbfa25f5-64c8-5574-4f5d-0151ba95d232@gmail.com/ Fixes: 1f52d7b62285 ("net: wwan: iosm: Enable M.2 7360 WWAN card support") Cc: M Chetan Kumar <m.chetan.kumar@intel.com> Cc: Bagas Sanjaya <bagasdotme@gmail.com> Cc: Intel Corporation <linuxwwan@intel.com> Cc: Loic Poulain <loic.poulain@linaro.org> Cc: Sergey Ryazanov <ryazanov.s.a@gmail.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org> Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230620194234.never.023-kees@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-06-22dt-bindings: mmc: fsl-imx-esdhc: Add imx6ul supportOleksij Rempel
Add the 'fsl,imx6ul-usdhc' value to the compatible properties list in the fsl-imx-esdhc.yaml file. This is required to match the compatible strings present in the 'mmc@2190000' node of 'imx6ul-prti6g.dtb'. This commit addresses the following dtbs_check warning: imx6ul-prti6g.dtb:0:0: /soc/bus@2100000/mmc@2190000: failed to match any schema with compatible: ['fsl,imx6ul-usdhc', 'fsl,imx6sx-usdhc'] Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230621093245.78130-2-o.rempel@pengutronix.de Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-06-22mmc: mmci: Add support for SW busy-end timeoutsUlf Hansson
The ux500 variant doesn't have a HW based timeout to use for busy-end IRQs. To avoid hanging and waiting for the card to stop signaling busy, let's schedule a delayed work, according to the corresponding cmd->busy_timeout for the command. If the work gets to run, let's kick the IRQ handler to complete the currently running request/command. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20230620091113.33393-1-ulf.hansson@linaro.org
2023-06-22sch_netem: acquire qdisc lock in netem_change()Eric Dumazet
syzbot managed to trigger a divide error [1] in netem. It could happen if q->rate changes while netem_enqueue() is running, since q->rate is read twice. It turns out netem_change() always lacked proper synchronization. [1] divide error: 0000 [#1] SMP KASAN CPU: 1 PID: 7867 Comm: syz-executor.1 Not tainted 6.1.30-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/25/2023 RIP: 0010:div64_u64 include/linux/math64.h:69 [inline] RIP: 0010:packet_time_ns net/sched/sch_netem.c:357 [inline] RIP: 0010:netem_enqueue+0x2067/0x36d0 net/sched/sch_netem.c:576 Code: 89 e2 48 69 da 00 ca 9a 3b 42 80 3c 28 00 4c 8b a4 24 88 00 00 00 74 0d 4c 89 e7 e8 c3 4f 3b fd 48 8b 4c 24 18 48 89 d8 31 d2 <49> f7 34 24 49 01 c7 4c 8b 64 24 48 4d 01 f7 4c 89 e3 48 c1 eb 03 RSP: 0018:ffffc9000dccea60 EFLAGS: 00010246 RAX: 000001a442624200 RBX: 000001a442624200 RCX: ffff888108a4f000 RDX: 0000000000000000 RSI: 000000000000070d RDI: 000000000000070d RBP: ffffc9000dcceb90 R08: ffffffff849c5e26 R09: fffffbfff10e1297 R10: 0000000000000000 R11: dffffc0000000001 R12: ffff888108a4f358 R13: dffffc0000000000 R14: 0000001a8cd9a7ec R15: 0000000000000000 FS: 00007fa73fe18700(0000) GS:ffff8881f6b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa73fdf7718 CR3: 000000011d36e000 CR4: 0000000000350ee0 Call Trace: <TASK> [<ffffffff84714385>] __dev_xmit_skb net/core/dev.c:3931 [inline] [<ffffffff84714385>] __dev_queue_xmit+0xcf5/0x3370 net/core/dev.c:4290 [<ffffffff84d22df2>] dev_queue_xmit include/linux/netdevice.h:3030 [inline] [<ffffffff84d22df2>] neigh_hh_output include/net/neighbour.h:531 [inline] [<ffffffff84d22df2>] neigh_output include/net/neighbour.h:545 [inline] [<ffffffff84d22df2>] ip_finish_output2+0xb92/0x10d0 net/ipv4/ip_output.c:235 [<ffffffff84d21e63>] __ip_finish_output+0xc3/0x2b0 [<ffffffff84d10a81>] ip_finish_output+0x31/0x2a0 net/ipv4/ip_output.c:323 [<ffffffff84d10f14>] NF_HOOK_COND include/linux/netfilter.h:298 [inline] [<ffffffff84d10f14>] ip_output+0x224/0x2a0 net/ipv4/ip_output.c:437 [<ffffffff84d123b5>] dst_output include/net/dst.h:444 [inline] [<ffffffff84d123b5>] ip_local_out net/ipv4/ip_output.c:127 [inline] [<ffffffff84d123b5>] __ip_queue_xmit+0x1425/0x2000 net/ipv4/ip_output.c:542 [<ffffffff84d12fdc>] ip_queue_xmit+0x4c/0x70 net/ipv4/ip_output.c:556 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Jiri Pirko <jiri@resnulli.us> Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230620184425.1179809-1-edumazet@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-06-22can: isotp: isotp_sendmsg(): fix return error fix on TX pathOliver Hartkopp
With commit d674a8f123b4 ("can: isotp: isotp_sendmsg(): fix return error on FC timeout on TX path") the missing correct return value in the case of a protocol error was introduced. But the way the error value has been read and sent to the user space does not follow the common scheme to clear the error after reading which is provided by the sock_error() function. This leads to an error report at the following write() attempt although everything should be working. Fixes: d674a8f123b4 ("can: isotp: isotp_sendmsg(): fix return error on FC timeout on TX path") Reported-by: Carsten Schmidt <carsten.schmidt-achim@t-online.de> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/all/20230607072708.38809-1-socketcan@hartkopp.net Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-22hrtimer: Add missing sparse annotations to hrtimer lockingBen Dooks
Sparse warns about lock imbalance vs. the hrtimer_base lock due to missing sparse annotations: kernel/time/hrtimer.c:175:33: warning: context imbalance in 'lock_hrtimer_base' - wrong count at exit kernel/time/hrtimer.c:1301:28: warning: context imbalance in 'hrtimer_start_range_ns' - unexpected unlock kernel/time/hrtimer.c:1336:28: warning: context imbalance in 'hrtimer_try_to_cancel' - unexpected unlock kernel/time/hrtimer.c:1457:9: warning: context imbalance in '__hrtimer_get_remaining' - unexpected unlock Add the annotations to the relevant functions. Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20230621075928.394481-1-ben.dooks@codethink.co.uk
2023-06-22platform/x86/amd/pmf: Register notify handler only if SPS is enabledShyam Sundar S K
Power source notify handler is getting registered even when none of the PMF feature in enabled leading to a crash. ... [ 22.592162] Call Trace: [ 22.592164] <TASK> [ 22.592164] ? rcu_note_context_switch+0x5e0/0x660 [ 22.592166] ? __warn+0x81/0x130 [ 22.592171] ? rcu_note_context_switch+0x5e0/0x660 [ 22.592172] ? report_bug+0x171/0x1a0 [ 22.592175] ? prb_read_valid+0x1b/0x30 [ 22.592177] ? handle_bug+0x3c/0x80 [ 22.592178] ? exc_invalid_op+0x17/0x70 [ 22.592179] ? asm_exc_invalid_op+0x1a/0x20 [ 22.592182] ? rcu_note_context_switch+0x5e0/0x660 [ 22.592183] ? acpi_ut_delete_object_desc+0x86/0xb0 [ 22.592186] ? acpi_ut_update_ref_count.part.0+0x22d/0x930 [ 22.592187] __schedule+0xc0/0x1410 [ 22.592189] ? ktime_get+0x3c/0xa0 [ 22.592191] ? lapic_next_event+0x1d/0x30 [ 22.592193] ? hrtimer_start_range_ns+0x25b/0x350 [ 22.592196] schedule+0x5e/0xd0 [ 22.592197] schedule_hrtimeout_range_clock+0xbe/0x140 [ 22.592199] ? __pfx_hrtimer_wakeup+0x10/0x10 [ 22.592200] usleep_range_state+0x64/0x90 [ 22.592203] amd_pmf_send_cmd+0x106/0x2a0 [amd_pmf bddfe0fe3712aaa99acce3d5487405c5213c6616] [ 22.592207] amd_pmf_update_slider+0x56/0x1b0 [amd_pmf bddfe0fe3712aaa99acce3d5487405c5213c6616] [ 22.592210] amd_pmf_set_sps_power_limits+0x72/0x80 [amd_pmf bddfe0fe3712aaa99acce3d5487405c5213c6616] [ 22.592213] amd_pmf_pwr_src_notify_call+0x49/0x90 [amd_pmf bddfe0fe3712aaa99acce3d5487405c5213c6616] [ 22.592216] notifier_call_chain+0x5a/0xd0 [ 22.592218] atomic_notifier_call_chain+0x32/0x50 ... Fix this by moving the registration of source change notify handler only when SPS(Static Slider) is advertised as supported. Reported-by: Allen Zhong <allen@atr.me> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217571 Fixes: 4c71ae414474 ("platform/x86/amd/pmf: Add support SPS PMF feature") Tested-by: Patil Rajesh Reddy <Patil.Reddy@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Link: https://lore.kernel.org/r/20230622060309.310001-1-Shyam-sundar.S-k@amd.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-06-22selftests: forwarding: Fix race condition in mirror installationDanielle Ratson
When mirroring to a gretap in hardware the device expects to be programmed with the egress port and all the encapsulating headers. This requires the driver to resolve the path the packet will take in the software data path and program the device accordingly. If the path cannot be resolved (in this case because of an unresolved neighbor), then mirror installation fails until the path is resolved. This results in a race that causes the test to sometimes fail. Fix this by setting the neighbor's state to permanent in a couple of tests, so that it is always valid. Fixes: 35c31d5c323f ("selftests: forwarding: Test mirror-to-gretap w/ UL 802.1d") Fixes: 239e754af854 ("selftests: forwarding: Test mirror-to-gretap w/ UL 802.1q") Signed-off-by: Danielle Ratson <danieller@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Link: https://lore.kernel.org/r/268816ac729cb6028c7a34d4dda6f4ec7af55333.1687264607.git.petrm@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-06-22Merge patch series "can: kvaser_pciefd: Fixes and improvements"Marc Kleine-Budde
Jimmy Assarsson <extja@kvaser.com> says: This patch series contains various non critical fixes and improvements for the kvaser_pciefd driver. Link: https://lore.kernel.org/all/20230529134248.752036-1-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-22can: kvaser_pciefd: Use TX FIFO size read from CAN controllerJimmy Assarsson
Use the TX FIFO size read from CAN controller register, instead of using hard coded value. Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/all/20230529134248.752036-15-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-22can: kvaser_pciefd: Refactor codeJimmy Assarsson
Refactor code; - Format code - Rename variables and macros - Remove intermediate variables - Add/remove blank lines - Reduce scope of variables - Add helper functions Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/all/20230529134248.752036-14-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-22can: kvaser_pciefd: Add len8_dlc supportJimmy Assarsson
Add support for the Classical CAN raw DLC functionality to send and receive DLC values from 9 .. 15. Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/all/20230529134248.752036-13-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-22can: kvaser_pciefd: Use FIELD_{GET,PREP} and GENMASK where appropriateJimmy Assarsson
Replace opencoded masking and shifting, with GENMASK, FIELD_GET and FIELD_PREP macros. Suggested-by: Vincent MAILHOL <mailhol.vincent@wanadoo.fr> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/all/20230529134248.752036-12-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-22can: kvaser_pciefd: Sort register definitionsJimmy Assarsson
Sort the registers defines, in the same order as the register bits/fields are defined. Sort register bits/fields in MSB-to-LSB order. Update and add comments. Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/all/20230529134248.752036-11-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-22can: kvaser_pciefd: Change return type for ↵Jimmy Assarsson
kvaser_pciefd_{receive,transmit,set_tx}_irq() Change return type to void for kvaser_pciefd_transmit_irq(), kvaser_pciefd_receive_irq() and kvaser_pciefd_set_tx_irq(). These functions always return zero. Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/all/20230529134248.752036-10-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-22can: kvaser_pciefd: Rename device ID definesJimmy Assarsson
Rename device ID defines to better match the product name of the supported device. Use 16 bit hexadecimal values for device IDs. And format kvaser_pciefd_id_table using clang-format. Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/all/20230529134248.752036-9-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-22can: kvaser_pciefd: Sort includes in alphabetic orderJimmy Assarsson
Sort the includes in alphabetic order. Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/all/20230529134248.752036-8-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-22can: kvaser_pciefd: Remove SPI flash parameter read functionalityJimmy Assarsson
Remove SPI flash parameter read functionality, since it's only used for reading the interface CAN controller count. This information is already read from a register, making the information redundant. Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/all/20230529134248.752036-7-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-22can: uapi: move CAN_RAW_FILTER_MAX definition to raw.hOliver Hartkopp
CAN_RAW_FILTER_MAX is only relevant for CAN_RAW sockets and used in linux/can/raw.c or in userspace applications that include the raw.h file anyway. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/all/20230609121051.9631-1-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-22can: kvaser_pciefd: Define unsigned constants with type suffix 'U'Jimmy Assarsson
Define unsigned constants with type suffix 'U' Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/all/20230529134248.752036-6-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-22can: kvaser_pciefd: Set hardware timestamp on transmitted packetsJimmy Assarsson
Set hardware timestamp on transmitted packets. Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices") Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/all/20230529134248.752036-5-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-22can: kvaser_pciefd: Add function to set skb hwtstampsJimmy Assarsson
Add new function, kvaser_pciefd_set_skb_timestamp(), to set skb hwtstamps. Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/all/20230529134248.752036-4-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-22can: kvaser_pciefd: Remove handler for unused KVASER_PCIEFD_PACK_TYPE_EFRAME_ACKJimmy Assarsson
The Kvaser KCAN controller got a feature to send error frames on request. The packet KVASER_PCIEFD_PACK_TYPE_EFRAME_ACK signals that the requested error frame was transmitted. Since this feature is not supported by the driver, drop the handler and add KVASER_PCIEFD_PACK_TYPE_EFRAME_ACK to the list of unexpected packet types. Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices") Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/all/20230529134248.752036-3-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-22can: kvaser_pciefd: Remove useless write to interrupt registerJimmy Assarsson
The PCI interrupt register, KVASER_PCIEFD_IRQ_REG, is level triggered. Writing to the register doesn't affect it. Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices") Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/all/20230529134248.752036-2-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-06-22Merge patch series "can: length: fix definitions and add bit length calculation"Marc Kleine-Budde
Vincent Mailhol <mailhol.vincent@wanadoo.fr> says: When created in [1], frames length definitions were added to implement byte queue limits (bql). Because bql expects lengths in bytes, bit length definitions were not considered back then. Recently, a need to refer to the exact frame length in bits, with CAN bit stuffing, appeared in [2]. This series introduces can_frame_bits(): a function-like macro that can calculate the exact size of a CAN(-FD) frame in bits with or without bitsuffing. [1] commit 85d99c3e2a13 ("can: length: can_skb_get_frame_len(): introduce function to get data length of frame in data link layer") Link: https://git.kernel.org/torvalds/c/85d99c3e2a13 [2] RE: [PATCH] can: mcp251xfd: Increase poll timeout Link: https://lore.kernel.org/linux-can/BL3PR11MB64846C83ACD04E9330B0FE66FB729@BL3PR11MB6484.namprd11.prod.outlook.com * Changelog * v4 -> v5: * In __can_cc_frame_bits() and __can_fd_frame_bits(), enclose data_len in brackets to prevent operator precedence issues. * Add a note in can_frame_bits() documentation to explain that data_len shall have no side effects. * While at it, make CAN(FD)_FRAME_LEN_MAX definition fit on a single line. * A few typo/grammar small fixes in the commit descriptions. Link: https://lore.kernel.org/linux-can/20230601165625.100040-1-mailhol.vincent@wanadoo.fr v3 -> v4: * No functional changes. * as reported by Simon Horman, fix typo in the documentation of can_bitstuffing_len(): "bitstream_len" -> "destuffed_len". * as reported by Thomas Kopp, fix several other typos: - "indicatior" -> "indicator" - "in on the wire" -> "on the wire" - "bitsuffing" -> "bitstuffing". * in CAN_FRAME_LEN_MAX comment: specify that only the dynamic bitstuffing gets ignored but that the intermission is included. * move the Suggested-by: Thomas Kopp tag from patch 2 to patch 3. * add Reviewed-by: Thomas Kopp tag on the full series. * add an additional line of comment for the @intermission argument of can_frame_bits(). Link: https://lore.kernel.org/linux-can/20230530144637.4746-1-mailhol.vincent@wanadoo.fr v2 -> v3: * turn can_frame_bits() and can_frame_bytes() into function-like macros. The fact that inline functions can not be used to initialize constant struct fields was bothering me. I did my best to make the macro look as less ugly as possible. * as reported by Simon Horman, add missing document for the is_fd argument of can_frame_bits(). Link: https://lore.kernel.org/linux-can/20230523065218.51227-1-mailhol.vincent@wanadoo.fr v1 -> v2: * as suggested by Thomas Kopp, add a new patch to the series to fix the stuff bit count and the fixed stuff bits definitions * and another patch to fix documentation of the Remote Request Substitution (RRS). * refactor the length definition. Instead of using individual macro, rely on an inline function. One reason is to minimize the number of definitions. Another reason is that because the dynamic bit stuff is calculated differently for CAN and CAN-FD, it is just not possible to multiply the existing CANFD_FRAME_OVERHEAD_SFF/EFF by the overhead ratio to get the bitsuffing: for CAN-FD, the CRC field is already stuffed by the fixed stuff bits and is out of scope of the dynamic bitstuffing. Link: https://lore.kernel.org/linux-can/20230507155506.3179711-1-mailhol.vincent@wanadoo.fr Link: https://lore.kernel.org/all/20230611025728.450837-1-mailhol.vincent@wanadoo.fr Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
generated by cgit (git 2.34.1) at 2025-09-12 19:39:37 +0000