summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-06-21wifi: iwlwifi: mvm: use min_t() for agg_sizeJohannes Berg
We can use min_t() for the agg_size and avoid spelling out the (firmware) limit twice. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230620125813.211768036c1f.I78b7eea32eaae20cc9f32869aa3f42814634ce9a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-21wifi: iwlwifi: mvm: use EHT maximum MPDU length on 2.4 GHzJohannes Berg
On 2.4 GHz there's no VHT, so EHT defines its own bits for the maximum MPDU length. Use them when telling firmware about the maximum. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230620125813.fd5322bb48a4.Ic471045f83229ceaacce25edcf992d3ce2c75de5@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-21wifi: iwlwifi: nvm: handle EHT/320 MHz regulatory flagJohannes Berg
Handle the regulatory EHT/320 MHz flags from firmware just like any other flags before it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230620125813.2c5e886c08f3.Ibc5c27d973d0590e2dea1f50435f9cf3ba8c2c09@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-21wifi: iwlwifi: mvm: make iwl_mvm_set_fw_mu_edca_params mld awareEmmanuel Grumbach
We need to work on the right link there. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230620125813.8762a90e8857.Ic5b8e96140a449fd1ed7008907d67fc36fe98506@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-21wifi: iwlwifi: fw: send marker cmd before suspend cmdMiri Korenblit
This is needed to sync the times in the FW and driver logs Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230620125813.9c84322c41b5.Id13816b3ece103f88514a7523b22bb2b9dcc8ab7@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-21wifi: iwlwifi: mvm: check the right csa_activeEmmanuel Grumbach
When the firmware says that the channel switch is happening, we check that we know about that switch by checking the csa_active bit. Until now, we checked the bss_conf from the vif instead of taking the bss_conf of the link. Fix that. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230620125813.63f835a4f578.I0bb2a231e4da506b7c751dc23a428558f9ecfa75@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-21wifi: iwlwifi: pcie: add size assertionsJohannes Berg
Ensure that the TX command scratch fits into the buffer provided by the first TB. It does, of course, but add some build-time validations in case we touch this code. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230620125813.8f54f2990b92.If19a038dfd633d4601e3d44dd0ff678bc0a851e9@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-21wifi: iwlwifi: pcie: refactor RB status size calculationJohannes Berg
We have three places doing this check, and even in slightly different ways (with/without an intermediate). Refactor that to a new small inline function. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230620125813.f3e87ddd5bce.Ifefba753043b68c394590a35bc6914a0f6497fd3@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-21wifi: nl80211/reg: add no-EHT regulatory flagJohannes Berg
This just propagates to the channel flags, like no-HE and similar other flags before it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230619161906.74ce2983aed8.Ifa343ba89c11760491daad5aee5a81209d5735a7@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-21wifi: cfg80211: Retrieve PSD information from RNR AP informationIlan Peer
Retrieve the Power Spectral Density (PSD) value from RNR AP information entry and store it so it could be used by the drivers. PSD value is explained in Section 9.4.2.170 of Draft P802.11Revme_D2.0. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230619161906.067ded2b8fc3.I9f407ab5800cbb07045a0537a513012960ced740@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-21wifi: mac80211: fix CRC calculation for extended elemsJohannes Berg
For extended elements, we currently only calculate the CRC for some of them, but really we should do it also for the rest that we care about, such as EHT operation and multi- link. Also, while at it, it seems we should do it even if they aren't well-formed, so we notice if that changes. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230619161906.93235d5c8651.I6615cb3c1244bc9618066baa2bdad7982e9abd1f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-21wifi: mac80211: avoid lockdep checking when removing deflinkBenjamin Berg
struct sta_info may be removed without holding sta_mtx if it has not yet been inserted. To support this, only assert that the lock is held for links other than the deflink. This fixes lockdep issues that may be triggered in error cases. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230619161906.cdd81377dea0.If5a6734b4b85608a2275a09b4f99b5564d82997f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-21wifi: mac80211: always hold sdata lock in chanctx assign/unassignJohannes Berg
Due to all the multi-link handling, we now expose the fact that the sdata/vif is locked to drivers, e.g. when the driver uses ieee80211_set_monitor_channel(). This was true when a chanctx is added to or removed from a link, _except_ in monitor mode with the virtual sdata/vif. Change that, so that drivers can make that assumption. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230619161906.a5cf7534beda.I5b51664231abee27e02f222083df7ccf88722929@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-21wifi: mac80211: store BSS param change count from assoc responseJohannes Berg
When receiving a multi-link association response, make sure to track the BSS parameter change count for each link, including the assoc link. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230619161906.1799c164e7e9.I8e2c1f5eec6eec3fab525ae2dead9f6f099a2427@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-21wifi: mac80211: drop some unprotected action framesJohannes Berg
We should not receive/handle unicast protected dual or public action frames that aren't protected, so drop them - in the latter case of course only if MFP is used. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230619161906.eb4461108129.I3c2223cf29d8a3586dfc74b2dda3f6fa2a4eea7c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-21wifi: mac80211: move action length check upJohannes Berg
We'd like to add more checks to the function here for action frames, so move up the length check from the action processing. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230619161906.e799254e923f.I0a1de5f6bbdc1b2ef5efaa0ac80c7c3f39415538@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-21wifi: mac80211: drop unprotected robust mgmt before 4-way-HSAlon Giladi
When MFP is used, drop unprotected robust management frames also before the 4-way handshake has been completed, i.e. no key has been installed yet. Signed-off-by: Alon Giladi <alon.giladi@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230619183718.cfbefddccd0c.Ife369dbb61c87e311ce15739d5b2b4763bfdfbae@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-21ALSA: hda/realtek: Add quirk for ASUS ROG GV601VLuke D. Jones
Adds the required quirk to enable the Cirrus amp and correct pins on the ASUS ROG GV601V series. While this works if the related _DSD properties are made available, these aren't included in the ACPI of these laptops (yet). Signed-off-by: Luke D. Jones <luke@ljones.dev> Link: https://lore.kernel.org/r/20230621085715.5382-1-luke@ljones.dev Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-06-21kselftest/arm64: Log signal code and address for unexpected signalsMark Brown
If we get an unexpected signal during a signal test log a bit more data to aid diagnostics. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20230620-arm64-selftest-log-wrong-signal-v1-1-3fe29bdaaf38@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2023-06-21wifi: p54: Add missing MODULE_FIRMWARE macroJuerg Haefliger
Add the missing MODULE_FIRMWARE macro for "3826.eeprom". Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com> Acked-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230616121917.1034761-1-juerg.haefliger@canonical.com
2023-06-21MAINTAINERS: ath11k: add wiki and bugreport pageKalle Valo
ath11k has a wiki and a separate page about reporting bugs, add those so hopefully people find them easier. Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230614144704.505553-3-kvalo@kernel.org
2023-06-21MAINTAINERS: ath9k: add git treeKalle Valo
ath9k patches go to my ath.git tree, document that. Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230614144704.505553-2-kvalo@kernel.org
2023-06-21MAINTAINERS: mt76: add git treeKalle Valo
Felix has a git tree for mt76 patches, document that. Signed-off-by: Kalle Valo <kvalo@kernel.org> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230614144704.505553-1-kvalo@kernel.org
2023-06-21wifi: rtw89: use struct to parse firmware headerPing-Ke Shih
A firmware contains basic header, sections and optional dynamic header. Define them by a struct, so it will be easier to understand the layout, and also simply access these elements. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230616060601.28460-1-pkshih@realtek.com
2023-06-21wifi: rtw89: TX power stuffs replace confusing naming of _max with _numZong-Zhe Yang
Some old declarations about TX power stuffs were named with confusing `_max`. But, they mean "the number of". So we change them to be named with `_num`. (No logic is changed.) Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230616060523.28396-1-pkshih@realtek.com
2023-06-21wifi: rtw89: 8851b: configure to force 1 TX power valuePing-Ke Shih
RTL8851B is a chip with only single RF path, and it must use 1 TX power value for transmission, so force 1 TX power value to prevent hardware logic gets wrong TX power values randomly in certain samples. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230615130442.18116-6-pkshih@realtek.com
2023-06-21wifi: rtw89: 8851b: rfk: update IQK to version 0x8Ping-Ke Shih
The main change is to adjust RX calibration groups from {0,1,2,3} to {0,2} in 5 GHz, so reduce elements from 4 to 2, and use index to iterate them. Meanwhile, always do RX narrowband calibration (ID_NBRXK) for each group. NCTL is used to assist IQK, so also update NCTL to 0x6 along with internal tag HALRF_029_00_103. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230615130442.18116-5-pkshih@realtek.com
2023-06-21wifi: rtw89: 8851b: rfk: add LCK trackPing-Ke Shih
LCK is short for LC Tank calibration. To keep RF performance, do this calibration if difference of thermal value is over a threshold. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230615130442.18116-4-pkshih@realtek.com
2023-06-21wifi: rtw89: 8851b: update TX power tables to R28Zong-Zhe Yang
Update 8851B TX power tables to RF version R28. TX power tables' changes: * TX power limit and TX power shape: update 5 GHz configurations for FCC and IC Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230615130442.18116-3-pkshih@realtek.com
2023-06-21wifi: rtw89: 8851b: update RF radio A parameters to R28Ping-Ke Shih
Update 8851b radio A parameters to R28 along with internal HALRF_029_00_103 Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230615130442.18116-2-pkshih@realtek.com
2023-06-21wifi: rtw88: fix not entering PS mode after AP stopsPo-Hao Huang
Without this patch, firmware only track beacons for port 0 and since we will always start AP on port 0, this results in misbehavior of power saving mode on other ports after AP stops. The "default port" H2C command is used to notify which port should firmware track. Update the correct settings to firmware so power saving mode can work properly. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230616125540.36877-7-pkshih@realtek.com
2023-06-21wifi: rtw88: refine register based H2C commandPo-Hao Huang
Since register based H2C commands don't need endian conversion. Introduce a new API that don't do conversion and send it directly. New caller are expected to encode with cpu order and gradually replace the old ones. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230616125540.36877-6-pkshih@realtek.com
2023-06-21wifi: rtw88: Stop high queue during scanPo-Hao Huang
When traversing channel list, TX in high queue should be disabled along with beacon function, so packets won't be sent to incorrect channels. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230616125540.36877-5-pkshih@realtek.com
2023-06-21wifi: rtw88: Skip high queue in hci_flushPo-Hao Huang
The flush period may not always intersect with DTIM and when that happens, an error log "timed out to flush pci TX ring[6]" is shown. Bypass this since hardware will do proper transmission on the next DTIM period for broadcast/multicast packets in high queue. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230616125540.36877-4-pkshih@realtek.com
2023-06-21wifi: rtw88: Fix AP mode incorrect DTIM behaviorPo-Hao Huang
Broadcast and multicast packets in high queue should be transmitted all at once during DTIM. But without proper settings, hardware fails to recognize that there are multiple packets and fetches only one. Fix this by signaling hardware with more data bit set when there are packets in the high queue. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230616125540.36877-3-pkshih@realtek.com
2023-06-21wifi: rtw88: use struct instead of macros to set TX descPo-Hao Huang
Remove macros that set TX descriptors. Use struct and le32_encode_bits() with mask definitions. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230616125540.36877-2-pkshih@realtek.com
2023-06-21wifi: rtw88: process VO packets without workqueue to avoid PTK rekey failedChih-Kang Chang
In the wpa_supplicant rekey flow, it sends an EAPOL packet 4/4 through nl80211_tx_control_port() and triggers wake_tx_queue() in the driver. Then, it sends nl80211_new_key() to configure a new key in mac80211. However, in wake_tx_queue(), a workqueue is used to process the tx packet, which might cause the driver to process the EAPOL packet later than nl80211_new_key(). As a result, the EAPOL 4/4 packet is dropped by mac80211 due to the rekey configuration being finished. The EAPOL packets belongs to VO packets that need high priority. Therefore, we process VO packets directly without workqueue to ensure that packets can process immediately. VO is normally used by voice application that is low traffic load and low latency, that doesn't affect user experience. We test iperf with VO packets(iperf3 -P4 -u -b 10000M -S 0xdf) before after TX throughput 162M 162M ping RTT 3.8ms 3.7ms Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230616031713.16769-1-pkshih@realtek.com
2023-06-21wifi: rtw88: Fix action frame transmission fail before associationPo-Hao Huang
For combo chips, antennas were controlled by bluetooth only during power on. If WiFi wish to do transmission, notification to the coexistence module are required. Previously we only do this before authentication. To allow transmission before auth, such as management TX, now we start the initiation of coexistence earlier so antennas are shared between WiFi and bluetooth after set_channel(), and frames could then be sent. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230615114348.7193-1-pkshih@realtek.com
2023-06-21bpf: Force kprobe multi expected_attach_type for kprobe_multi linkJiri Olsa
We currently allow to create perf link for program with expected_attach_type == BPF_TRACE_KPROBE_MULTI. This will cause crash when we call helpers like get_attach_cookie or get_func_ip in such program, because it will call the kprobe_multi's version (current->bpf_ctx context setup) of those helpers while it expects perf_link's current->bpf_ctx context setup. Making sure that we use BPF_TRACE_KPROBE_MULTI expected_attach_type only for programs attaching through kprobe_multi link. Fixes: ca74823c6e16 ("bpf: Add cookie support to programs attached with kprobe multi link") Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20230618131414.75649-1-jolsa@kernel.org
2023-06-21bpf/btf: Accept function names that contain dotsFlorent Revest
When building a kernel with LLVM=1, LLVM_IAS=0 and CONFIG_KASAN=y, LLVM leaves DWARF tags for the "asan.module_ctor" & co symbols. In turn, pahole creates BTF_KIND_FUNC entries for these and this makes the BTF metadata validation fail because they contain a dot. In a dramatic turn of event, this BTF verification failure can cause the netfilter_bpf initialization to fail, causing netfilter_core to free the netfilter_helper hashmap and netfilter_ftp to trigger a use-after-free. The risk of u-a-f in netfilter will be addressed separately but the existence of "asan.module_ctor" debug info under some build conditions sounds like a good enough reason to accept functions that contain dots in BTF. Although using only LLVM=1 is the recommended way to compile clang-based kernels, users can certainly do LLVM=1, LLVM_IAS=0 as well and we still try to support that combination according to Nick. To clarify: - > v5.10 kernel, LLVM=1 (LLVM_IAS=0 is not the default) is recommended, but user can still have LLVM=1, LLVM_IAS=0 to trigger the issue - <= 5.10 kernel, LLVM=1 (LLVM_IAS=0 is the default) is recommended in which case GNU as will be used Fixes: 1dc92851849c ("bpf: kernel side support for BTF Var and DataSec") Signed-off-by: Florent Revest <revest@chromium.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andrii@kernel.org> Cc: Yonghong Song <yhs@meta.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Link: https://lore.kernel.org/bpf/20230615145607.3469985-1-revest@chromium.org
2023-06-21Revert "virtio-blk: support completion batching for the IRQ path"Michael S. Tsirkin
This reverts commit 07b679f70d73483930e8d3c293942416d9cd5c13. This change appears to have broken things... We now see applications hanging during disk accesses. e.g. multi-port virtio-blk device running in h/w (FPGA) Host running a simple 'fio' test. [global] thread=1 direct=1 ioengine=libaio norandommap=1 group_reporting=1 bs=4K rw=read iodepth=128 runtime=1 numjobs=4 time_based [job0] filename=/dev/vda [job1] filename=/dev/vdb [job2] filename=/dev/vdc ... [job15] filename=/dev/vdp i.e. 16 disks; 4 queues per disk; simple burst of 4KB reads This is repeatedly run in a loop. After a few, normally <10 seconds, fio hangs. With 64 queues (16 disks), failure occurs within a few seconds; with 8 queues (2 disks) it may take ~hour before hanging. Last message: fio-3.19 Starting 8 threads Jobs: 1 (f=1): [_(7),R(1)][68.3%][eta 03h:11m:06s] I think this means at the end of the run 1 queue was left incomplete. 'diskstats' (run while fio is hung) shows no outstanding transactions. e.g. $ cat /proc/diskstats ... 252 0 vda 1843140071 0 14745120568 712568645 0 0 0 0 0 3117947 712568645 0 0 0 0 0 0 252 16 vdb 1816291511 0 14530332088 704905623 0 0 0 0 0 3117711 704905623 0 0 0 0 0 0 ... Other stats (in the h/w, and added to the virtio-blk driver ([a]virtio_queue_rq(), [b]virtblk_handle_req(), [c]virtblk_request_done()) all agree, and show every request had a completion, and that virtblk_request_done() never gets called. e.g. PF= 0 vq=0 1 2 3 [a]request_count - 839416590 813148916 105586179 84988123 [b]completion1_count - 839416590 813148916 105586179 84988123 [c]completion2_count - 0 0 0 0 PF= 1 vq=0 1 2 3 [a]request_count - 823335887 812516140 104582672 75856549 [b]completion1_count - 823335887 812516140 104582672 75856549 [c]completion2_count - 0 0 0 0 i.e. the issue is after the virtio-blk driver. This change was introduced in kernel 6.3.0. I am seeing this using 6.3.3. If I run with an earlier kernel (5.15), it does not occur. If I make a simple patch to the 6.3.3 virtio-blk driver, to skip the blk_mq_add_to_batch()call, it does not fail. e.g. kernel 5.15 - this is OK virtio_blk.c,virtblk_done() [irq handler] if (likely(!blk_should_fake_timeout(req->q))) { blk_mq_complete_request(req); } kernel 6.3.3 - this fails virtio_blk.c,virtblk_handle_req() [irq handler] if (likely(!blk_should_fake_timeout(req->q))) { if (!blk_mq_complete_request_remote(req)) { if (!blk_mq_add_to_batch(req, iob, virtblk_vbr_status(vbr), virtblk_complete_batch)) { virtblk_request_done(req); //this never gets called... so blk_mq_add_to_batch() must always succeed } } } If I do, kernel 6.3.3 - this is OK virtio_blk.c,virtblk_handle_req() [irq handler] if (likely(!blk_should_fake_timeout(req->q))) { if (!blk_mq_complete_request_remote(req)) { virtblk_request_done(req); //force this here... if (!blk_mq_add_to_batch(req, iob, virtblk_vbr_status(vbr), virtblk_complete_batch)) { virtblk_request_done(req); //this never gets called... so blk_mq_add_to_batch() must always succeed } } } Perhaps you might like to fix/test/revert this change... Martin Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202306090826.C1fZmdMe-lkp@intel.com/ Cc: Suwan Kim <suwan.kim027@gmail.com> Tested-by: edliaw@google.com Reported-by: "Roberts, Martin" <martin.roberts@intel.com> Message-Id: <336455b4f630f329380a8f53ee8cad3868764d5c.1686295549.git.mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-06-21wifi: mac80211: fix documentation config referenceJohannes Berg
We shouldn't refer to CPTCFG_, that's for backports, in mainline that's just CONFIG_. Fix it. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-21readdir: Replace one-element arrays with flexible-array membersGustavo A. R. Silva
One-element arrays are deprecated, and we are replacing them with flexible array members instead. So, replace one-element arrays with flexible-array members in multiple structures. Address the following -Wstringop-overflow warnings seen when built m68k architecture with m5307c3_defconfig configuration: In function '__put_user_fn', inlined from 'fillonedir' at fs/readdir.c:170:2: include/asm-generic/uaccess.h:49:35: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 49 | *(u8 __force *)to = *(u8 *)from; | ~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~ fs/readdir.c: In function 'fillonedir': fs/readdir.c:134:25: note: at offset 1 into destination object 'd_name' of size 1 134 | char d_name[1]; | ^~~~~~ In function '__put_user_fn', inlined from 'filldir' at fs/readdir.c:257:2: include/asm-generic/uaccess.h:49:35: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 49 | *(u8 __force *)to = *(u8 *)from; | ~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~ fs/readdir.c: In function 'filldir': fs/readdir.c:211:25: note: at offset 1 into destination object 'd_name' of size 1 211 | char d_name[1]; | ^~~~~~ This helps with the ongoing efforts to globally enable -Wstringop-overflow. This results in no differences in binary output. Link: https://github.com/KSPP/linux/issues/79 Link: https://github.com/KSPP/linux/issues/312 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Message-Id: <ZJHiPJkNKwxkKz1c@work> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-06-20fsverity: improve documentation for builtin signature supportEric Biggers
fsverity builtin signatures (CONFIG_FS_VERITY_BUILTIN_SIGNATURES) aren't the only way to do signatures with fsverity, and they have some major limitations. Yet, more users have tried to use them, e.g. recently by https://github.com/ostreedev/ostree/pull/2640. In most cases this seems to be because users aren't sufficiently familiar with the limitations of this feature and what the alternatives are. Therefore, make some updates to the documentation to try to clarify the properties of this feature and nudge users in the right direction. Note that the Integrity Policy Enforcement (IPE) LSM, which is not yet upstream, is planned to use the builtin signatures. (This differs from IMA, which uses its own signature mechanism.) For that reason, my earlier patch "fsverity: mark builtin signatures as deprecated" (https://lore.kernel.org/r/20221208033548.122704-1-ebiggers@kernel.org), which marked builtin signatures as "deprecated", was controversial. This patch therefore stops short of marking the feature as deprecated. I've also revised the language to focus on better explaining the feature and what its alternatives are. Link: https://lore.kernel.org/r/20230620041937.5809-1-ebiggers@kernel.org Reviewed-by: Colin Walters <walters@verbum.org> Reviewed-by: Luca Boccassi <bluca@debian.org> Signed-off-by: Eric Biggers <ebiggers@google.com>
2023-06-20Merge branch 'net-stmmac-dwmac-qcom-ethqos-add-support-for-emac4'Jakub Kicinski
Bartosz Golaszewski says: ==================== net: stmmac: dwmac-qcom-ethqos: add support for EMAC4 Extend the dwmac-qcom-ethqos driver to support EMAC4. While at it: rework the code somewhat. The bindings have been reviewed by DT maintainers. This is a sub-series of [1] with only the patches targetting the net subsystem as they can go in independently. [1] https://lore.kernel.org/lkml/20230617001644.4e093326@kernel.org/T/ ==================== Link: https://lore.kernel.org/r/20230619092402.195578-1-brgl@bgdev.pl Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-20net: stmmac: dwmac-qcom-ethqos: add support for emac4 on sa8775p platformsBartosz Golaszewski
sa8775p uses EMAC version 4, add the relevant defines, rename the has_emac3 switch to has_emac_ge_3 (has emac greater-or-equal than 3) and add the new compatible. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-20dt-bindings: net: qcom,ethqos: add description for sa8775pBartosz Golaszewski
Add the compatible for the MAC controller on sa8775p platforms. This MAC works with a single interrupt so add minItems to the interrupts property. The fourth clock's name is different here so change it. Enable relevant PHY properties. Add the relevant compatibles to the binding document for snps,dwmac as well. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-20net: stmmac: add new switch to struct plat_stmmacenet_dataBartosz Golaszewski
On some platforms, the PCS can be integrated in the MAC so the driver will not see any PCS link activity. Add a switch that allows the platform drivers to let the core code know. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-20net: stmmac: dwmac-qcom-ethqos: add support for SGMIIBartosz Golaszewski
On sa8775p the MAC is connected to the external PHY over SGMII so add support for it to the driver. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-20net: stmmac: dwmac-qcom-ethqos: prepare the driver for more PHY modesBartosz Golaszewski
In preparation for supporting SGMII, let's make the code a bit more generic. Add a new callback for MAC configuration so that we can assign a different variant of it in the future. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-14 06:46:16 +0000