summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-03-13xHCI: set cycle state when allocate ringsAndiry Xu
In the past all the rings were allocated with cycle state equal to 1. Now the driver may expand an existing ring, and the new segments shall be allocated with the same cycle state as the old one. This affects ring allocation and cached ring re-initialization. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Tested-by: Paul Zimmerman <Paul.Zimmerman@synopsys.com>
2012-03-13xHCI: factor out segments allocation and free functionAndiry Xu
Factor out the segments allocation and free part from ring allocation and free routines since driver may call them directly when try to expand a ring. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Tested-by: Paul Zimmerman <Paul.Zimmerman@synopsys.com>
2012-03-13xHCI: count free TRBs on transfer ringAndiry Xu
In the past, the room_on_ring() check was implemented by walking all over the ring, which is wasteful and complicated. Count the number of free TRBs instead. The free TRBs number should be updated when enqueue/dequeue pointer is updated, or upon the completion of a set dequeue pointer command. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Tested-by: Paul Zimmerman <Paul.Zimmerman@synopsys.com>
2012-03-13xHCI: store ring's last segment and segment numbersAndiry Xu
Store the ring's last segment pointer and number of segments for ring expansion usage. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Tested-by: Paul Zimmerman <Paul.Zimmerman@synopsys.com>
2012-03-13perf record: Fix buffer overrun bug in tracepoint_id_to_path()Stephane Eranian
This patch fixes a buffer overrun bug in tracepoint_id_to_path(). The bug manisfested itself as a memory error reported by perf record. I ran into it with perf sched: $ perf sched rec noploop 2 noploop for 2 seconds [ perf record: Woken up 14 times to write data ] [ perf record: Captured and wrote 42.701 MB perf.data (~1865622 samples) ] Fatal: No memory to alloc tracepoints list It turned out that tracepoint_id_to_path() was reading the tracepoint id using read() but the buffer was not large enough to include the \n terminator for id with 4 digits or more. The patch fixes the problem by extending the buffer to a more reasonable size covering all possible id length include \n terminator. Note that atoll() stops at the first non digit character, thus it is not necessary to clear the buffer between each read. Signed-off-by: Stephane Eranian <eranian@google.com> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: fweisbec@gmail.com Cc: dsahern@gmail.com Link: http://lkml.kernel.org/r/20120313155102.GA6465@quad Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-13Merge branch 'linus' into irq/coreThomas Gleixner
Reason: Get upstream fixes integrated before further modifications. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-03-13sched/x86: Fix overflow in cyc2ns_offsetSalman Qazi
When a machine boots up, the TSC generally gets reset. However, when kexec is used to boot into a kernel, the TSC value would be carried over from the previous kernel. The computation of cycns_offset in set_cyc2ns_scale is prone to an overflow, if the machine has been up more than 208 days prior to the kexec. The overflow happens when we multiply *scale, even though there is enough room to store the final answer. We fix this issue by decomposing tsc_now into the quotient and remainder of division by CYC2NS_SCALE_FACTOR and then performing the multiplication separately on the two components. Refactor code to share the calculation with the previous fix in __cycles_2_ns(). Signed-off-by: Salman Qazi <sqazi@google.com> Acked-by: John Stultz <john.stultz@linaro.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Turner <pjt@google.com> Cc: john stultz <johnstul@us.ibm.com> Link: http://lkml.kernel.org/r/20120310004027.19291.88460.stgit@dungbeetle.mtv.corp.google.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-13Merge tag 'v3.3-rc7' into sched/coreIngo Molnar
Merge reason: merge back final fixes, prepare for the merge window. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-13hwmon: (w83627ehf) Describe undocumented pwm attributesGuenter Roeck
Add description of pwm[1-4]_start_output, pwm[1-4]_step_output, pwm[1-4]_stop_output, and pwm[1-4]_max_output attributes to driver documentation. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Jean Delvare <khali@linux-fr.org>
2012-03-13hwmon: (w83627ehf) Fix temp2 source for W83627UHGJean Delvare
Properly set the source of temp2 for the W83627UHG. Also fix a comment right before that, and document the W83627UHG as reporting up to 3 temperatures. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Guenter Roeck <guenter.roeck@ericsson.com> Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-03-12Merge branch 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86Linus Torvalds
Pull x86 platfrm driver fixes from Matthew Garrett: "Some trivial patches that fix wifi on some Lenovos and avoid a potential memory corruption issue on some Panasonics, plus two straightforward new drivers that touch no existing code." * 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86: panasonic-laptop: avoid overflow in acpi_pcc_hotkey_add() acer-wmi: No wifi rfkill on Lenovo machines Fujitsu tablet extras driver x86: Add amilo-rfkill driver for some Fujitsu-Siemens Amilo laptops
2012-03-12Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci Pull PCI changes from Jesse Barnes: "A single fix for a regression that affects some people who try to disable ASPM for whatever reason." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci: PCI: ignore pre-1.1 ASPM quirking when ASPM is disabled
2012-03-12Merge tag 'sh-for-linus' of git://github.com/pmundt/linux-shLinus Torvalds
Pull SuperH fixes from Paul Mundt. * tag 'sh-for-linus' of git://github.com/pmundt/linux-sh: sh-sci / PM: Avoid deadlocking runtime PM sh: fix up the ubc clock definition for sh7785. sh: add parameter for RSPI in clock-sh7757 sh: Fix sh2a vbr table for more than 255 irqs
2012-03-12Merge tag 'rmobile-for-linus' of git://github.com/pmundt/linux-shLinus Torvalds
Pull SH/R-Mobile fixes from Paul Mundt. * tag 'rmobile-for-linus' of git://github.com/pmundt/linux-sh: ARM: mach-shmobile: ap4evb: fixup fsi2_ak4643_info typo ARM: mach-shmobile: mackerel: Reserve DMA memory for the frame buffer ARM: mach-shmobile: Fix ag5evm compilation by including linux/videodev2.h ARM: mach-shmobile: Fix bonito compile breakage
2012-03-12tun: don't hold network namespace by tun socketsStanislav Kinsbursky
v3: added previously removed sock_put() to the tun_release() callback, because sk_release_kernel() doesn't drop the socket reference. v2: sk_release_kernel() used for socket release. Dummy tun_release() is required for sk_release_kernel() ---> sock_release() ---> sock->ops->release() call. TUN was designed to destroy it's socket on network namesapce shutdown. But this will never happen for persistent device, because it's socket holds network namespace. This patch removes of holding network namespace by TUN socket and replaces it by creating socket in init_net and then changing it's net it to desired one. On shutdown socket is moved back to init_net prior to final put. Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-12bnx2x: FCoE statistics id fixedYuval Mintz
FCoE statistics ids were distinguished from the L2's statistics ids. However, not all of the change was committed. This causes a possible collision of indices when FCoE is present. This patch fixes the issue. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-12bnx2x: dcb bit indices flags used as bitsYuval Mintz
DCB flags were updated using the flags' bit offsets instead of the actual bits. This is now fixed. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-12bnx2x: added cpu_to_le16 when preparing ramrod's dataAriel Elior
Fixed endianess issue when passing arguments to FW. Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-12bnx2x: pfc statistics counts pfc events twiceYuval Mintz
When pfc statistics were counted, the delta change from last count was summed twice. This fixes the issue. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-12xHCI: store ring's typeAndiry Xu
When allocate a ring, store its type - four transfer types for endpoint, TYPE_STREAM for stream transfer, and TYPE_COMMAND/TYPE_EVENT for xHCI host. This helps to get rid of three bool function parameters: link_trbs, isoc and consumer. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Tested-by: Paul Zimmerman <Paul.Zimmerman@synopsys.com>
2012-03-12Merge branch 'perf/hw-branch-sampling' into perf/coreIngo Molnar
Merge reason: The 'perf record -b' hardware branch sampling feature is ready for upstream. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-12perf report: Fix annotate double quit issue in branch view modeStephane Eranian
This patch fixes perf report to not go back two levels when pressing the 'q' key while annotating in branch view mode. When pressing 'q' in annotate mode and if the branch source and target belong to different functions, perf now brings up the annotation popup menu again to offer the option to annotate the other branch source or target. As part of the code restructuring in perf_evsel__hists_browse() we also fix a memory leak on options[] in case of error. Signed-off-by: Stephane Eranian <eranian@google.com> Cc: peterz@infradead.org Cc: acme@redhat.com Cc: asharma@fb.com Cc: ravitillo@lbl.gov Cc: vweaver1@eecs.utk.edu Cc: khandual@linux.vnet.ibm.com Cc: dsahern@gmail.com Link: http://lkml.kernel.org/r/1331565210-10865-3-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-12perf report: Remove duplicate annotate choice in branch view modeStephane Eranian
This patch removes the duplicated annotate selection when browsing in branch view mode. If the sym and dso oof the branch source and target are the same, then only one annotate choice is proposed. Signed-off-by: Stephane Eranian <eranian@google.com> Cc: peterz@infradead.org Cc: acme@redhat.com Cc: asharma@fb.com Cc: ravitillo@lbl.gov Cc: vweaver1@eecs.utk.edu Cc: khandual@linux.vnet.ibm.com Cc: dsahern@gmail.com Link: http://lkml.kernel.org/r/1331565210-10865-2-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-12perf/x86: Prettify pmu config literalsPeter Zijlstra
I got somewhat tired of having to decode hex numbers.. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Link: http://lkml.kernel.org/n/tip-0vsy1sgywc4uar3mu1szm0rg@git.kernel.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-12Merge branch 'perf/urgent' into perf/coreIngo Molnar
Merge reason: We are going to queue up a dependent patch. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-12perf/x86: Fix local vs remote memory events for NHM/WSMPeter Zijlstra
Verified using the below proglet.. before: [root@westmere ~]# perf stat -e node-stores -e node-store-misses ./numa 0 remote write Performance counter stats for './numa 0': 2,101,554 node-stores 2,096,931 node-store-misses 5.021546079 seconds time elapsed [root@westmere ~]# perf stat -e node-stores -e node-store-misses ./numa 1 local write Performance counter stats for './numa 1': 501,137 node-stores 199 node-store-misses 5.124451068 seconds time elapsed After: [root@westmere ~]# perf stat -e node-stores -e node-store-misses ./numa 0 remote write Performance counter stats for './numa 0': 2,107,516 node-stores 2,097,187 node-store-misses 5.012755149 seconds time elapsed [root@westmere ~]# perf stat -e node-stores -e node-store-misses ./numa 1 local write Performance counter stats for './numa 1': 2,063,355 node-stores 165 node-store-misses 5.082091494 seconds time elapsed #define _GNU_SOURCE #include <sched.h> #include <stdio.h> #include <errno.h> #include <sys/mman.h> #include <sys/types.h> #include <dirent.h> #include <signal.h> #include <unistd.h> #include <numaif.h> #include <stdlib.h> #define SIZE (32*1024*1024) volatile int done; void sig_done(int sig) { done = 1; } int main(int argc, char **argv) { cpu_set_t *mask, *mask2; size_t size; int i, err, t; int nrcpus = 1024; char *mem; unsigned long nodemask = 0x01; /* node 0 */ DIR *node; struct dirent *de; int read = 0; int local = 0; if (argc < 2) { printf("usage: %s [0-3]\n", argv[0]); printf(" bit0 - local/remote\n"); printf(" bit1 - read/write\n"); exit(0); } switch (atoi(argv[1])) { case 0: printf("remote write\n"); break; case 1: printf("local write\n"); local = 1; break; case 2: printf("remote read\n"); read = 1; break; case 3: printf("local read\n"); local = 1; read = 1; break; } mask = CPU_ALLOC(nrcpus); size = CPU_ALLOC_SIZE(nrcpus); CPU_ZERO_S(size, mask); node = opendir("/sys/devices/system/node/node0/"); if (!node) perror("opendir"); while ((de = readdir(node))) { int cpu; if (sscanf(de->d_name, "cpu%d", &cpu) == 1) CPU_SET_S(cpu, size, mask); } closedir(node); mask2 = CPU_ALLOC(nrcpus); CPU_ZERO_S(size, mask2); for (i = 0; i < size; i++) CPU_SET_S(i, size, mask2); CPU_XOR_S(size, mask2, mask2, mask); // invert if (!local) mask = mask2; err = sched_setaffinity(0, size, mask); if (err) perror("sched_setaffinity"); mem = mmap(0, SIZE, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0); err = mbind(mem, SIZE, MPOL_BIND, &nodemask, 8*sizeof(nodemask), MPOL_MF_MOVE); if (err) perror("mbind"); signal(SIGALRM, sig_done); alarm(5); if (!read) { while (!done) { for (i = 0; i < SIZE; i++) mem[i] = 0x01; } } else { while (!done) { for (i = 0; i < SIZE; i++) t += *(volatile char *)(mem + i); } } return 0; } Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Cc: <stable@kernel.org> Link: http://lkml.kernel.org/n/tip-tq73sxus35xmqpojf7ootxgs@git.kernel.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-12sched: Fix nohz load accounting -- again!Peter Zijlstra
Various people reported nohz load tracking still being wrecked, but Doug spotted the actual problem. We fold the nohz remainder in too soon, causing us to loose samples and under-account. So instead of playing catch-up up-front, always do a single load-fold with whatever state we encounter and only then fold the nohz remainder and play catch-up. Reported-by: Doug Smythies <dsmythies@telus.net> Reported-by: LesÅ=82aw Kope=C4=87 <leslaw.kopec@nasza-klasa.pl> Reported-by: Aman Gupta <aman@tmm1.net> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-4v31etnhgg9kwd6ocgx3rxl8@git.kernel.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-12sched: Update yield() docsPeter Zijlstra
Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1331056466.11248.327.camel@twins Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-12printk/sched: Introduce special printk_sched() for those awkward momentsPeter Zijlstra
There's a few awkward printk()s inside of scheduler guts that people prefer to keep but really are rather deadlock prone. Fudge around it by storing the text in a per-cpu buffer and poll it using the existing printk_tick() handler. This will drop output when its more frequent than once a tick, however only the affinity thing could possible go that fast and for that just one should suffice to notify the admin he's done something silly.. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/n/tip-wua3lmkt3dg8nfts66o6brne@git.kernel.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-12sched/nohz: Correctly initialize 'next_balance' in 'nohz' idle balancerDiwakar Tundlam
The 'next_balance' field of 'nohz' idle balancer must be initialized to jiffies. Since jiffies is initialized to negative 300 seconds the 'nohz' idle balancer does not run for the first 300s (5mins) after bootup. If no new processes are spawed or no idle cycles happen, the load on the cpus will remain unbalanced for that duration. Signed-off-by: Diwakar Tundlam <dtundlam@nvidia.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1DD7BFEDD3147247B1355BEFEFE4665237994F30EF@HQMAIL04.nvidia.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-12sched: Cleanup cpu_active madnessPeter Zijlstra
Stepan found: CPU0 CPUn _cpu_up() __cpu_up() boostrap() notify_cpu_starting() set_cpu_online() while (!cpu_active()) cpu_relax() <PREEMPT-out> smp_call_function(.wait=1) /* we find cpu_online() is true */ arch_send_call_function_ipi_mask() /* wait-forever-more */ <PREEMPT-in> local_irq_enable() cpu_notify(CPU_ONLINE) sched_cpu_active() set_cpu_active() Now the purpose of cpu_active is mostly with bringing down a cpu, where we mark it !active to avoid the load-balancer from moving tasks to it while we tear down the cpu. This is required because we only update the sched_domain tree after we brought the cpu-down. And this is needed so that some tasks can still run while we bring it down, we just don't want new tasks to appear. On cpu-up however the sched_domain tree doesn't yet include the new cpu, so its invisible to the load-balancer, regardless of the active state. So instead of setting the active state after we boot the new cpu (and consequently having to wait for it before enabling interrupts) set the cpu active before we set it online and avoid the whole mess. Reported-by: Stepan Moskovchenko <stepanm@codeaurora.org> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1323965362.18942.71.camel@twins Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-12sched: Fix load-balance wreckagePeter Zijlstra
Commit 367456c ("sched: Ditch per cgroup task lists for load-balancing") completely wrecked load-balancing due to a few silly mistakes. Correct those and remove more pointless code. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-zk04ihygwxn7qqrlpaf73b0r@git.kernel.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-12hwmon: (w83627ehf) Fix memory leak in probe functionGuenter Roeck
The driver probe function leaked memory if creating the cpu0_vid attribute file failed. Fix by converting the driver to use devm_kzalloc. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Cc: stable@vger.kernel.org # 2.6.32+ Acked-by: Jean Delvare <khali@linux-fr.org>
2012-03-12arch/tile: misplaced parens near likelyroel
Parentheses were missing. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-03-12arch/tile: sync up the defconfig files to the tipChris Metcalf
This was inspired by mchehab@redhat.com's observation that we didn't have EDAC configured on by default in both files. In addition, we were setting INITRAMFS_SOURCE to a non-empty string, which isn't a very common default and required editing to do test builds. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-03-12arch/tile: Fix up from commit 8a25a2fd126c621f44f3aeaef80d51f00fc11639Chris Metcalf
This was Kay Siever's bombing to convert 'cpu' to a regular subsystem. The change left a bogus second argument to sysfs_create_file(). Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-03-12rt2x00: fix random stallsStanislaw Gruszka
Is possible that we stop queue and then do not wake up it again, especially when packets are transmitted fast. That can be easily reproduced with modified tx queue entry_num to some small value e.g. 16. If mac80211 already hold local->queue_stop_reason_lock, then we can wait on that lock in both rt2x00queue_pause_queue() and rt2x00queue_unpause_queue(). After drooping ->queue_stop_reason_lock is possible that __ieee80211_wake_queue() will be performed before __ieee80211_stop_queue(), hence we stop queue and newer wake up it again. Another race condition is possible when between rt2x00queue_threshold() check and rt2x00queue_pause_queue() we will process all pending tx buffers on different cpu. This might happen if for example interrupt will be triggered on cpu performing rt2x00mac_tx(). To prevent race conditions serialize pause/unpause by queue->tx_lock. Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-12iwl3945: fix possible il->txq NULL pointer dereference in delayed worksStanislaw Gruszka
On il3945_down procedure we free tx queue data and nullify il->txq pointer. After that we drop mutex and then cancel delayed works. There is possibility, that after drooping mutex and before the cancel, some delayed work will start and crash while trying to send commands to the device. For example, here is reported crash in il3945_bg_reg_txpower_periodic(): https://bugzilla.kernel.org/show_bug.cgi?id=42766#c10 Patch fix problem by adding il->txq check on works that send commands, hence utilize tx queue. Reported-by: Clemens Eisserer <linuxhippy@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-12hwmon: (w83627ehf) Fix writing into fan_stop_time for NCT6775F/NCT6776FGuenter Roeck
NCT6775F and NCT6776F have their own set of registers for FAN_STOP_TIME. The correct registers were used to read FAN_STOP_TIME, but writes used the wrong registers. Fix it. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Cc: stable@vger.kernel.org # 3.0+ Acked-by: Jean Delvare <khali@linux-fr.org>
2012-03-12regulator: Support driver probe deferralMark Brown
If we fail to locate a requested regulator return -EPROBE_DEFER. If drivers pass this error code through to their caller (which they really should) then this will ensure that the probe is retried later when further devices become available. In the unusual case where a driver doesn't want this it can override the default behaviour. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-12vt: NULL dereference in vt_do_kdsk_ioctl()Dan Carpenter
We forgot to set the "key_map" variable here, so it's still NULL. This was introduced recently in 079c9534a9 "vt:tackle kbd_table". Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-12tty: serial: vt8500: fix annotations for probe/removeWolfram Sang
Fixes: WARNING: drivers/tty/serial/built-in.o(.data+0x30): Section mismatch in reference from the variable vt8500_platform_driver to the function .init.text:vt8500_serial_probe() The variable vt8500_platform_driver references the function __init vt8500_serial_probe() And mark the remove pointer while we are here. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-12usb: host: xhci: use __ffs() instead of hardcoding shiftFelipe Balbi
__ffs() can tell us which is the SEGMENT_SHIFT value to be used. This will prevent problems when users are too fast and don't pay attention to the need of fixing the Shift after changing TRBS_PER_SEGMENT. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2012-03-12xHCI: BESL calculation based on USB2.0 LPM errataAndiry Xu
The latest released errata for USB2.0 ECN LPM adds new fields to USB2.0 extension descriptor, defines two BESL values for device: baseline BESL and deep BESL. Baseline BESL value communicates a nominal power savings design point and the deep BESL value communicates a significant power savings design point. If device indicates BESL value, driver will use a value count in both host BESL and device BESL. Use baseline BESL value as default. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Tested-by: Jason Fan <jcfan@qca.qualcomm.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2012-03-12workqueue: use percpu allocator for cwq on UPLai Jiangshan
I notice that the commit bbddff makes percpu allocator can work on UP, So we don't need the magic way for UP. Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2012-03-12Merge 3.3-rc7 into usb-nextGreg Kroah-Hartman
This resolves the conflict with drivers/usb/host/ehci-fsl.h that happened with changes in Linus's and this branch at the same time. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-12panasonic-laptop: avoid overflow in acpi_pcc_hotkey_add()Xi Wang
num_sifr could go negative since acpi_pcc_get_sqty() returns -EINVAL on error. Then it could bypass the sanity check (num_sifr > 255). The subsequent call to kzalloc() would allocate a small buffer, leading to a memory corruption. Signed-off-by: Xi Wang <xi.wang@gmail.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-03-12acer-wmi: No wifi rfkill on Lenovo machinesIke Panhc
We have several reports which says acer-wmi is loaded on ideapads and register rfkill for wifi which can not be unblocked. Since ideapad-laptop also register rfkill for wifi and it works reliably, it will be fine acer-wmi is not going to register rfkill for wifi once VPC2004 is found. Also put IBM0068/LEN0068 in the list. Though thinkpad_acpi has no wifi rfkill capability, there are reports which says acer-wmi also block wireless on Thinkpad E520/E420. Signed-off-by: Ike Panhc <ike.pan@canonical.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-03-12Fujitsu tablet extras driverRobert Gerlach
This patch adds support for some of the devices within a wide variety of Fujitsu Tablet Computers, both convertibles and slates. Primarily it allows for the automatic detection of the tablet/notebook mode for convertible tablet pc's, and orientation for docked slates. It also adds support for the application panel buttons usually found next to the tablet screen, and docking station detection for slates. Signed-off-by: Robert Gerlach <khnz@gmx.de> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-03-12x86: Add amilo-rfkill driver for some Fujitsu-Siemens Amilo laptopsBen Hutchings
An rfkill driver based on the fsaa1655g and fsam7440 drivers for Fujitsu-Siemens Amilo A1655 and M7440 models found at: http://sourceforge.net/projects/fsaa1655g/ http://sourceforge.net/projects/fsam7440/ This adds DMI matching, replaces the procfs files with rfkill devices, and uses the proper functions to write to the i8042 safely. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Matthew Garrett <mjg@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-26 21:00:11 +0000