| Age | Commit message (Collapse) | Author |
|---|
|
Better explain how pwm_round_waveform_might_sleep() (and so the
respective lowlevel driver callback) is supposed to round and the
meaning of the return value.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/db84abf1e82e4498fc0e7c318d2673771d0039fe.1744120697.git.ukleinek@kernel.org
[ukleinek: Fix a rst formatting issue reported by Stephen Rothwell]
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
There is a copy and paste bug so we accidentally returned
PTR_ERR(ddata->clk) instead of "ret".
Fixes: 2b62c89448dd ("pwm: Add Loongson PWM controller support")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Binbin Zhou <zhoubinbin@loongson.cn>
Link: https://lore.kernel.org/r/6965a480-745c-426f-b17b-e96af532578f@stanley.mountain
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
mul_u64_u64_div_u64() returns an u64 that might be bigger than U32_MAX.
To properly handle this case it must not be directly assigned to an u32
value.
Use a wider type for duty and period to make the idiom:
duty = mul_u64_u64_div_u64(...)
if (duty > U32_MAX)
duty = U32_MAX;
actually work as intended.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/44f3c764-8b65-49a9-b3ad-797e9fbb96f5@stanley.mountain
Fixes: 2b62c89448dd ("pwm: Add Loongson PWM controller support")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Binbin Zhou <zhoubinbin@loongson.cn>
Link: https://lore.kernel.org/r/20250412122124.1636152-2-u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20250408-gpiochip-set-rv-pwm-v1-1-61e5c3358a74@linaro.org
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
The .round_waveform_tohw() is supposed to return 0 if the request could
be rounded down to match the hardware capabilities and return 1 if
rounding down wasn't possible.
Expand the PWM_DEBUG check to not only assert proper downrounding if 0
was returned but also check that it was actually rounded up when the
callback signalled uprounding.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/dfb824ae37f99df068c752d48cbd163c044a74fb.1743844730.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
When you're interested in the actual register settings the driver
chooses or interprets you want to see them also for calls that hit
corner cases.
Make sure that all calls to stm32_pwm_round_waveform_tohw() and
stm32_pwm_round_waveform_fromhw() emit the debug message about the
register settings.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/fe154e79319da5ff4159cdc71201a9d3b395e491.1743844730.git.u.kleine-koenig@baylibre.com
[ukleinek: widen scope of rate in stm32_pwm_round_waveform_fromhw() to fix FTBFS]
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
Instead of manually calculating the offset of the channels CCxE bit,
make use of the TIM_CCER_CCxE macro.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/7803f63b1310ddbd706f51f2f42d30b6dd786b03.1743844730.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
Traditionally /sys/kernel/debug/pwm only contained info from pwm->state.
Most of the time this data represents the last requested setting which
might differ considerably from the actually configured in hardware
setting.
Expand the information in the debugfs file with the actual values.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Trevor Gamblin <tgamblin@baylibre.com>
Link: https://lore.kernel.org/r/20250404104844.543479-2-u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
dev_get_drvdata()'s parameter is a const pointer, so the chip passed to
pwmchip_get_drvdata() can be const, too.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20250403151134.266388-2-u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
Add a message to the error path of devm_clk_get() and simplify the error
path of devm_pwmchip_add() while improving the error message en passant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20250313072855.3360076-2-u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
This commit adds a generic PWM framework driver for the PWM controller
found on Loongson family chips.
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Co-developed-by: Juxin Gao <gaojuxin@loongson.cn>
Signed-off-by: Juxin Gao <gaojuxin@loongson.cn>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Link: https://lore.kernel.org/r/76050a903a8015422fb9261ad88c7d9cc2edbbd8.1743403075.git.zhoubinbin@loongson.cn
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
Add Loongson PWM controller binding with DT schema format using
json-schema.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Link: https://lore.kernel.org/r/57e0cbd4b7ce37da94094205e28a2ec2256c7175.1743403075.git.zhoubinbin@loongson.cn
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
meson_pwm_cnt_to_ns() uses clock rate got from clk_get_rate(). clk object
is getting from driver's private data thru several steps. Since
meson_pwm_cnt_to_ns() is called several times from a single scope it's
easier to get clock rate once and pass it as parameter.
Signed-off-by: George Stark <gnstark@salutedevices.com>
Link: https://lore.kernel.org/r/20241225105639.1787237-2-gnstark@salutedevices.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
g12, axg and s4 SoC families support constant and polarity bits
so enable those features in corresponding chip data structs.
Signed-off-by: George Stark <gnstark@salutedevices.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241119125318.3492261-5-gnstark@salutedevices.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
Add separate devce id data for compatibles: amlogic,meson-g12a-ee-pwm,
amlogic,meson-axg-pwm-v2, amlogic,meson-g12-pwm-v2 due to those PWM
modules have different set of features than meson8.
Signed-off-by: George Stark <gnstark@salutedevices.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241119125318.3492261-4-gnstark@salutedevices.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
Newer meson PWM IPs support constant and polarity bits. Support them to
correctly implement constant and inverted output levels.
Using constant bit allows to have truly stable low or high output level.
Since hi and low regs internally increment its values by 1 just writing
zero to any of them gives 1 clock count impulse. If constant bit is set
zero value in hi and low regs is not incremented.
Using polarity bit instead of swapping hi and low reg values allows to
correctly identify inversion in .get_state().
Signed-off-by: George Stark <gnstark@salutedevices.com>
Link: https://lore.kernel.org/r/20241119125318.3492261-3-gnstark@salutedevices.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
In .get_state() callback meson_pwm_channel struct are used to store
lo and hi reg values but they are never reused after that so
for clearness use local variable instead.
Signed-off-by: George Stark <gnstark@salutedevices.com>
Link: https://lore.kernel.org/r/20241119125318.3492261-2-gnstark@salutedevices.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
- Properly handle errors when file-backed I/O fails
- Fix compilation issues on ARM platform (arm-linux-gnueabi)
- Fix parsing of encoded extents
- Minor cleanup
* tag 'erofs-for-6.15-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: remove duplicate code
erofs: fix encoded extents handling
erofs: add __packed annotation to union(__le16..)
erofs: set error to bio if file-backed IO fails
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"A few more miscellaneous ext4 bug fixes and cleanups including some
syzbot failures and fixing a stale file handing refeencing an inode
previously used as a regular file, but which has been deleted and
reused as an ea_inode would result in ext4 erroneously considering
this a case of fs corruption"
* tag 'ext4_for_linus-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix off-by-one error in do_split
ext4: make block validity check resistent to sb bh corruption
ext4: avoid -Wflex-array-member-not-at-end warning
Documentation: ext4: Add fields to ext4_super_block documentation
ext4: don't treat fhandle lookup of ea_inode as FS corruption
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock fix from Mike Rapoport:
"Fix build of memblock test.
Add missing stubs for mutex and free_reserved_area() to memblock
tests"
* tag 'fixes-2025-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock tests: Fix mutex related build error
|
|
Syzkaller detected a use-after-free issue in ext4_insert_dentry that was
caused by out-of-bounds access due to incorrect splitting in do_split.
BUG: KASAN: use-after-free in ext4_insert_dentry+0x36a/0x6d0 fs/ext4/namei.c:2109
Write of size 251 at addr ffff888074572f14 by task syz-executor335/5847
CPU: 0 UID: 0 PID: 5847 Comm: syz-executor335 Not tainted 6.12.0-rc6-syzkaller-00318-ga9cda7c0ffed #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/30/2024
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:377 [inline]
print_report+0x169/0x550 mm/kasan/report.c:488
kasan_report+0x143/0x180 mm/kasan/report.c:601
kasan_check_range+0x282/0x290 mm/kasan/generic.c:189
__asan_memcpy+0x40/0x70 mm/kasan/shadow.c:106
ext4_insert_dentry+0x36a/0x6d0 fs/ext4/namei.c:2109
add_dirent_to_buf+0x3d9/0x750 fs/ext4/namei.c:2154
make_indexed_dir+0xf98/0x1600 fs/ext4/namei.c:2351
ext4_add_entry+0x222a/0x25d0 fs/ext4/namei.c:2455
ext4_add_nondir+0x8d/0x290 fs/ext4/namei.c:2796
ext4_symlink+0x920/0xb50 fs/ext4/namei.c:3431
vfs_symlink+0x137/0x2e0 fs/namei.c:4615
do_symlinkat+0x222/0x3a0 fs/namei.c:4641
__do_sys_symlink fs/namei.c:4662 [inline]
__se_sys_symlink fs/namei.c:4660 [inline]
__x64_sys_symlink+0x7a/0x90 fs/namei.c:4660
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
The following loop is located right above 'if' statement.
for (i = count-1; i >= 0; i--) {
/* is more than half of this entry in 2nd half of the block? */
if (size + map[i].size/2 > blocksize/2)
break;
size += map[i].size;
move++;
}
'i' in this case could go down to -1, in which case sum of active entries
wouldn't exceed half the block size, but previous behaviour would also do
split in half if sum would exceed at the very last block, which in case of
having too many long name files in a single block could lead to
out-of-bounds access and following use-after-free.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Cc: stable@vger.kernel.org
Fixes: 5872331b3d91 ("ext4: fix potential negative array index in do_split()")
Signed-off-by: Artem Sadovnikov <a.sadovnikov@ispras.ru>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250404082804.2567-3-a.sadovnikov@ispras.ru
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Block validity checks need to be skipped in case they are called
for journal blocks since they are part of system's protected
zone.
Currently, this is done by checking inode->ino against
sbi->s_es->s_journal_inum, which is a direct read from the ext4 sb
buffer head. If someone modifies this underneath us then the
s_journal_inum field might get corrupted. To prevent against this,
change the check to directly compare the inode with journal->j_inode.
**Slight change in behavior**: During journal init path,
check_block_validity etc might be called for journal inode when
sbi->s_journal is not set yet. In this case we now proceed with
ext4_inode_block_valid() instead of returning early. Since systems zones
have not been set yet, it is okay to proceed so we can perform basic
checks on the blocks.
Suggested-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://patch.msgid.link/0c06bc9ebfcd6ccfed84a36e79147bf45ff5adc1.1743142920.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Use the `DEFINE_RAW_FLEX()` helper for an on-stack definition of
a flexible structure where the size of the flexible-array member
is known at compile-time, and refactor the rest of the code,
accordingly.
So, with these changes, fix the following warning:
fs/ext4/mballoc.c:3041:40: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/Z-SF97N3AxcIMlSi@kspp
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Documentation and implementation of the ext4 super block have
slightly diverged: Padding has been removed in order to make room for
new fields that are still missing in the documentation.
Add the new fields s_encryption_level, s_first_error_errorcode,
s_last_error_errorcode to the documentation of the ext4 super block.
Fixes: f542fbe8d5e8 ("ext4 crypto: reserve codepoints used by the ext4 encryption feature")
Fixes: 878520ac45f9 ("ext4: save the error code which triggered an ext4_error() in the superblock")
Signed-off-by: Tom Vierjahn <tom.vierjahn@acm.org>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://patch.msgid.link/20250324221004.5268-1-tom.vierjahn@acm.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Hide get_vm_area() from MMUless builds
The function get_vm_area() is not defined when CONFIG_MMU is not
defined. Hide that function within #ifdef CONFIG_MMU.
- Fix output of synthetic events when they have dynamic strings
The print fmt of the synthetic event's format file use to have "%.*s"
for dynamic size strings even though the user space exported
arguments had only __get_str() macro that provided just a nul
terminated string. This was fixed so that user space could parse this
properly.
But the reason that it had "%.*s" was because internally it provided
the maximum size of the string as one of the arguments. The fix that
replaced "%.*s" with "%s" caused the trace output (when the kernel
reads the event) to write "(efault)" as it would now read the length
of the string as "%s".
As the string provided is always nul terminated, there's no reason
for the internal code to use "%.*s" anyway. Just remove the length
argument to match the "%s" that is now in the format.
- Fix the ftrace subops hash logic of the manager ops hash
The function_graph uses the ftrace subops code. The subops code is a
way to have a single ftrace_ops registered with ftrace to determine
what functions will call the ftrace_ops callback. More than one user
of function graph can register a ftrace_ops with it. The function
graph infrastructure will then add this ftrace_ops as a subops with
the main ftrace_ops it registers with ftrace. This is because the
functions will always call the function graph callback which in turn
calls the subops ftrace_ops callbacks.
The main ftrace_ops must add a callback to all the functions that the
subops want a callback from. When a subops is registered, it will
update the main ftrace_ops hash to include the functions it wants.
This is the logic that was broken.
The ftrace_ops hash has a "filter_hash" and a "notrace_hash" where
all the functions in the filter_hash but not in the notrace_hash are
attached by ftrace. The original logic would have the main ftrace_ops
filter_hash be a union of all the subops filter_hashes and the main
notrace_hash would be a intersect of all the subops filter hashes.
But this was incorrect because the notrace hash depends on the
filter_hash it is associated to and not the union of all
filter_hashes.
Instead, when a subops is added, just include all the functions of
the subops hash that are in its filter_hash but not in its
notrace_hash. The main subops hash should not use its notrace hash,
unless all of its subops hashes have an empty filter_hash (which
means to attach to all functions), and then, and only then, the main
ftrace_ops notrace hash can be the intersect of all the subops
hashes.
This not only fixes the bug, but also simplifies the code.
- Add a selftest to better test the subops filtering
Add a selftest that would catch the bug fixed by the above change.
- Fix extra newline printed in function tracing with retval
The function parameter code changed the output logic slightly and
called print_graph_retval() and also printed a newline. The
print_graph_retval() also prints a newline which caused blank lines
to be printed in the function graph tracer when retval was added.
This caused one of the selftests to fail if retvals were enabled.
Instead remove the new line output from print_graph_retval() and have
the callers always print the new line so that it doesn't have to do
special logic if it calls print_graph_retval() or not.
- Fix out-of-bound memory access in the runtime verifier
When rv_is_container_monitor() is called on the last entry on the
link list it references the next entry, which is the list head and
causes an out-of-bound memory access.
* tag 'trace-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rv: Fix out-of-bound memory access in rv_is_container_monitor()
ftrace: Do not have print_graph_retval() add a newline
tracing/selftest: Add test to better test subops filtering of function graph
ftrace: Fix accounting of subop hashes
ftrace: Properly merge notrace hashes
tracing: Do not add length to print format in synthetic events
tracing: Hide get_vm_area() from MMUless builds
|
|
Pull bpf fixes from Alexei Starovoitov:
- Followup fixes for resilient spinlock (Kumar Kartikeya Dwivedi):
- Make res_spin_lock test less verbose, since it was spamming BPF
CI on failure, and make the check for AA deadlock stronger
- Fix rebasing mistake and use architecture provided
res_smp_cond_load_acquire
- Convert BPF maps (queue_stack and ringbuf) to resilient spinlock
to address long standing syzbot reports
- Make sure that classic BPF load instruction from SKF_[NET|LL]_OFF
offsets works when skb is fragmeneted (Willem de Bruijn)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Convert ringbuf map to rqspinlock
bpf: Convert queue_stack map to rqspinlock
bpf: Use architecture provided res_smp_cond_load_acquire
selftests/bpf: Make res_spin_lock AA test condition stronger
selftests/net: test sk_filter support for SKF_NET_OFF on frags
bpf: support SKF_NET_OFF and SKF_LL_OFF on skb frags
selftests/bpf: Make res_spin_lock test less verbose
|
|
When rv_is_container_monitor() is called on the last monitor in
rv_monitors_list, KASAN yells:
BUG: KASAN: global-out-of-bounds in rv_is_container_monitor+0x101/0x110
Read of size 8 at addr ffffffff97c7c798 by task setup/221
The buggy address belongs to the variable:
rv_monitors_list+0x18/0x40
This is due to list_next_entry() is called on the last entry in the list.
It wraps around to the first list_head, and the first list_head is not
embedded in struct rv_monitor_def.
Fix it by checking if the monitor is last in the list.
Cc: stable@vger.kernel.org
Cc: Gabriele Monaco <gmonaco@redhat.com>
Fixes: cb85c660fcd4 ("rv: Add option for nested monitors and include sched")
Link: https://lore.kernel.org/e85b5eeb7228bfc23b8d7d4ab5411472c54ae91b.1744355018.git.namcao@linutronix.de
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The retval and retaddr options for function_graph tracer will add a
comment at the end of a function for both leaf and non leaf functions that
looks like:
__wake_up_common(); /* ret=0x1 */
} /* pick_next_task_fair ret=0x0 */
The function print_graph_retval() adds a newline after the "*/". But if
that's not called, the caller function needs to make sure there's a
newline added.
This is confusing and when the function parameters code was added, it
added a newline even when calling print_graph_retval() as the fact that
the print_graph_retval() function prints a newline isn't obvious.
This caused an extra newline to be printed and that made it fail the
selftests when the retval option was set, as the selftests were not
expecting blank lines being injected into the trace.
Instead of having print_graph_retval() print a newline, just have the
caller always print the newline regardless if it calls print_graph_retval()
or not. This not only fixes this bug, but it also simplifies the code.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250411133015.015ca393@gandalf.local.home
Reported-by: Mark Brown <broonie@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/all/ccc40f2b-4b9e-4abd-8daf-d22fce2a86f0@sirena.org.uk/
Fixes: ff5c9c576e754 ("ftrace: Add support for function argument to graph tracer")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm fixes from Uwe Kleine-König:
"A set of fixes for pwm core and various drivers
The first three patches handle clk_get_rate() returning 0 (which might
happen for example if the CCF is disabled). The first of these was
found because this triggered a warning with clang, the two others by
looking for similar issues in other drivers.
The remaining three fixes address issues in the new waveform pwm API.
Now that I worked on this a bit more, the finer details and corner
cases are better understood and the code is fixed accordingly"
* tag 'pwm/for-6.15-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
pwm: axi-pwmgen: Let .round_waveform_tohw() signal when request was rounded up
pwm: stm32: Search an appropriate duty_cycle if period cannot be modified
pwm: Let pwm_set_waveform() succeed even if lowlevel driver rounded up
pwm: fsl-ftm: Handle clk_get_rate() returning 0
pwm: rcar: Improve register calculation
pwm: mediatek: Prevent divide-by-zero in pwm_mediatek_config()
|
|
Pull smb client fixes from Steve French:
- Fix multichannel decryption UAF
- Fix regression mounting to onedrive shares
- Fix missing mount option check for posix vs. noposix
- Fix version field in WSL symlinks
- Three minor cleanup to reparse point handling
- SMB1 fix for WSL special files
- SMB1 Kerberos fix
- Add SMB3 defines for two new FS attributes
* tag 'v6.15-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb3: Add defines for two new FileSystemAttributes
cifs: Fix querying of WSL CHR and BLK reparse points over SMB1
cifs: Split parse_reparse_point callback to functions: get buffer and parse buffer
cifs: Improve handling of name surrogate reparse points in reparse.c
cifs: Remove explicit handling of IO_REPARSE_TAG_MOUNT_POINT in inode.c
cifs: Fix encoding of SMB1 Session Setup Kerberos Request in non-UNICODE mode
smb: client: fix UAF in decryption with multichannel
cifs: Fix support for WSL-style symlinks
smb311 client: fix missing tcon check when mounting with linux/posix extensions
cifs: Ensure that all non-client-specific reparse points are processed by the server
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fix from Bjorn Helgaas:
- Run quirk_huawei_pcie_sva() before arm_smmu_probe_device(), which
depends on the quirk, to avoid IOMMU initialization failures
(Zhangfei Gao)
* tag 'pci-v6.15-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI: Run quirk_huawei_pcie_sva() before arm_smmu_probe_device()
|
|
A bug was discovered that showed the accounting of the subops of the
ftrace_ops filtering was incorrect. Add a new test to better test the
filtering.
This test creates two instances, where it will add various filters to both
the set_ftrace_filter and the set_ftrace_notrace files and enable
function_graph. Then it looks into the enabled_functions file to make sure
that the filters are behaving correctly.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Andy Chiu <andybnac@gmail.com>
Link: https://lore.kernel.org/20250409152720.380778379@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The function graph infrastructure uses ftrace to hook to functions. It has
a single ftrace_ops to manage all the users of function graph. Each
individual user (tracing, bpf, fprobes, etc) has its own ftrace_ops to
track the functions it will have its callback called from. These
ftrace_ops are "subops" to the main ftrace_ops of the function graph
infrastructure.
Each ftrace_ops has a filter_hash and a notrace_hash that is defined as:
Only trace functions that are in the filter_hash but not in the
notrace_hash.
If the filter_hash is empty, it means to trace all functions.
If the notrace_hash is empty, it means do not disable any function.
The function graph main ftrace_ops needs to be a superset containing all
the functions to be traced by all the subops it has. The algorithm to
perform this merge was incorrect.
When the first subops was added to the main ops, it simply made the main
ops a copy of the subops (same filter_hash and notrace_hash).
When a second ops was added, it joined the new subops filter_hash with the
main ops filter_hash as a union of the two sets. The intersect between the
new subops notrace_hash and the main ops notrace_hash was created as the
new notrace_hash of the main ops.
The issue here is that it would then start tracing functions than no
subops were tracing. For example if you had two subops that had:
subops 1:
filter_hash = '*sched*' # trace all functions with "sched" in it
notrace_hash = '*time*' # except do not trace functions with "time"
subops 2:
filter_hash = '*lock*' # trace all functions with "lock" in it
notrace_hash = '*clock*' # except do not trace functions with "clock"
The intersect of '*time*' functions with '*clock*' functions could be the
empty set. That means the main ops will be tracing all functions with
'*time*' and all "*clock*" in it!
Instead, modify the algorithm to be a bit simpler and correct.
First, when adding a new subops, even if it's the first one, do not add
the notrace_hash if the filter_hash is not empty. Instead, just add the
functions that are in the filter_hash of the subops but not in the
notrace_hash of the subops into the main ops filter_hash. There's no
reason to add anything to the main ops notrace_hash.
The notrace_hash of the main ops should only be non empty iff all subops
filter_hashes are empty (meaning to trace all functions) and all subops
notrace_hashes include the same functions.
That is, the main ops notrace_hash is empty if any subops filter_hash is
non empty.
The main ops notrace_hash only has content in it if all subops
filter_hashes are empty, and the content are only functions that intersect
all the subops notrace_hashes. If any subops notrace_hash is empty, then
so is the main ops notrace_hash.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Andy Chiu <andybnac@gmail.com>
Link: https://lore.kernel.org/20250409152720.216356767@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The global notrace hash should be jointly decided by the intersection of
each subops's notrace hash, but not the filter hash.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20250408160258.48563-1-andybnac@gmail.com
Fixes: 5fccc7552ccb ("ftrace: Add subops logic to allow one ops to manage many")
Signed-off-by: Andy Chiu <andybnac@gmail.com>
[ fixed removing of freeing of filter_hash ]
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
quirk_huawei_pcie_sva() sets properties needed by arm_smmu_probe_device(),
but bcb81ac6ae3c ("iommu: Get DT/ACPI parsing into the proper probe path")
changed the iommu_probe_device() flow so arm_smmu_probe_device() is now
invoked before the quirk, leading to failures like this:
reg-dummy reg-dummy: late IOMMU probe at driver bind, something fishy here!
WARNING: CPU: 0 PID: 1 at drivers/iommu/iommu.c:449 __iommu_probe_device+0x140/0x570
RIP: 0010:__iommu_probe_device+0x140/0x570
The SR-IOV enumeration ordering changes like this:
pci_iov_add_virtfn
pci_device_add
pci_fixup_device(pci_fixup_header) <--
device_add
bus_notify
iommu_bus_notifier
+ iommu_probe_device
+ arm_smmu_probe_device
pci_bus_add_device
pci_fixup_device(pci_fixup_final) <--
device_attach
driver_probe_device
really_probe
pci_dma_configure
acpi_dma_configure_id
- iommu_probe_device
- arm_smmu_probe_device
The non-SR-IOV case is similar in that pci_device_add() is called from
pci_scan_single_device() in the generic enumeration path and
pci_bus_add_device() is called later, after all host bridges have been
enumerated.
Declare quirk_huawei_pcie_sva() as a header fixup to ensure that it happens
before arm_smmu_probe_device().
Fixes: bcb81ac6ae3c ("iommu: Get DT/ACPI parsing into the proper probe path")
Reported-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Closes: https://lore.kernel.org/all/SJ1PR11MB61295DE21A1184AEE0786E25B9D22@SJ1PR11MB6129.namprd11.prod.outlook.com/
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
[bhelgaas: commit log, add failure info and reporter]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250317011352.5806-1-zhangfei.gao@linaro.org
|
|
Convert the raw spinlock used by BPF ringbuf to rqspinlock. Currently,
we have an open syzbot report of a potential deadlock. In addition, the
ringbuf can fail to reserve spuriously under contention from NMI
context.
It is potentially attractive to enable unconstrained usage (incl. NMIs)
while ensuring no deadlocks manifest at runtime, perform the conversion
to rqspinlock to achieve this.
This change was benchmarked for BPF ringbuf's multi-producer contention
case on an Intel Sapphire Rapids server, with hyperthreading disabled
and performance governor turned on. 5 warm up runs were done for each
case before obtaining the results.
Before (raw_spinlock_t):
Ringbuf, multi-producer contention
==================================
rb-libbpf nr_prod 1 11.440 ± 0.019M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 2 2.706 ± 0.010M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 3 3.130 ± 0.004M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 4 2.472 ± 0.003M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 8 2.352 ± 0.001M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 12 2.813 ± 0.001M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 16 1.988 ± 0.001M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 20 2.245 ± 0.001M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 24 2.148 ± 0.001M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 28 2.190 ± 0.001M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 32 2.490 ± 0.001M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 36 2.180 ± 0.001M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 40 2.201 ± 0.001M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 44 2.226 ± 0.001M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 48 2.164 ± 0.001M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 52 1.874 ± 0.001M/s (drops 0.000 ± 0.000M/s)
After (rqspinlock_t):
Ringbuf, multi-producer contention
==================================
rb-libbpf nr_prod 1 11.078 ± 0.019M/s (drops 0.000 ± 0.000M/s) (-3.16%)
rb-libbpf nr_prod 2 2.801 ± 0.014M/s (drops 0.000 ± 0.000M/s) (3.51%)
rb-libbpf nr_prod 3 3.454 ± 0.005M/s (drops 0.000 ± 0.000M/s) (10.35%)
rb-libbpf nr_prod 4 2.567 ± 0.002M/s (drops 0.000 ± 0.000M/s) (3.84%)
rb-libbpf nr_prod 8 2.468 ± 0.001M/s (drops 0.000 ± 0.000M/s) (4.93%)
rb-libbpf nr_prod 12 2.510 ± 0.001M/s (drops 0.000 ± 0.000M/s) (-10.77%)
rb-libbpf nr_prod 16 2.075 ± 0.001M/s (drops 0.000 ± 0.000M/s) (4.38%)
rb-libbpf nr_prod 20 2.640 ± 0.001M/s (drops 0.000 ± 0.000M/s) (17.59%)
rb-libbpf nr_prod 24 2.092 ± 0.001M/s (drops 0.000 ± 0.000M/s) (-2.61%)
rb-libbpf nr_prod 28 2.426 ± 0.005M/s (drops 0.000 ± 0.000M/s) (10.78%)
rb-libbpf nr_prod 32 2.331 ± 0.004M/s (drops 0.000 ± 0.000M/s) (-6.39%)
rb-libbpf nr_prod 36 2.306 ± 0.003M/s (drops 0.000 ± 0.000M/s) (5.78%)
rb-libbpf nr_prod 40 2.178 ± 0.002M/s (drops 0.000 ± 0.000M/s) (-1.04%)
rb-libbpf nr_prod 44 2.293 ± 0.001M/s (drops 0.000 ± 0.000M/s) (3.01%)
rb-libbpf nr_prod 48 2.022 ± 0.001M/s (drops 0.000 ± 0.000M/s) (-6.56%)
rb-libbpf nr_prod 52 1.809 ± 0.001M/s (drops 0.000 ± 0.000M/s) (-3.47%)
There's a fair amount of noise in the benchmark, with numbers on reruns
going up and down by 10%, so all changes are in the range of this
disturbance, and we see no major regressions.
Reported-by: syzbot+850aaf14624dc0c6d366@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/0000000000004aa700061379547e@google.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250411101759.4061366-1-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A couple of cleanups for the error handling in the Freescale drivers"
* tag 'spi-fix-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: fsl-spi: Remove redundant probe error message
spi: fsl-qspi: Fix double cleanup in probe error path
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fixes from Damien Le Moal:
- Fix missing error checks during controller probe in the sata_sx4
driver (Wentao)
- Fix missing error checks during controller probe in the pata_pxa
driver (Henry)
* tag 'ata-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: sata_sx4: Add error handling in pdc20621_i2c_read()
ata: pata_pxa: Fix potential NULL pointer dereference in pxa_ata_probe()
|
|
Pull more block fixes from Jens Axboe:
"Apparently my internal clock was off, or perhaps it was just wishful
thinking, but I sent out block fixes yesterday as my brain assumed it
was Friday. Subsequently, that missed the NVMe fixes that should go
into this weeks release as well. Hence, here's a followup with those,
and another simple fix.
- NVMe pull request via Christoph:
- nvmet fc/fcloop refcounting fixes (Daniel Wagner)
- fix missed namespace/ANA scans (Hannes Reinecke)
- fix a use after free in the new TCP netns support (Kuniyuki
Iwashima)
- fix a NULL instead of false review in multipath (Uday Shankar)
- Use strscpy() for null_blk disk name copy"
* tag 'block-6.15-20250411' of git://git.kernel.dk/linux:
null_blk: Use strscpy() instead of strscpy_pad() in null_add_dev()
nvmet-fc: put ref when assoc->del_work is already scheduled
nvmet-fc: take tgtport reference only once
nvmet-fc: update tgtport ref per assoc
nvmet-fc: inline nvmet_fc_free_hostport
nvmet-fc: inline nvmet_fc_delete_assoc
nvmet-fcloop: add ref counting to lport
nvmet-fcloop: replace kref with refcount
nvmet-fcloop: swap list_add_tail arguments
nvme-tcp: fix use-after-free of netns by kernel TCP socket.
nvme: multipath: fix return value of nvme_available_path
nvme: re-read ANA log page after ns scan completes
nvme: requeue namespace scan on missed AENs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Joerg Roedel:
- Fix two crashes, one in core code and a NULL-ptr dereference in the
Mediatek IOMMU driver
- Dma_ops cleanup fix for core code
- Two fixes for Intel VT-d driver:
- Fix posted MSI issue when users change cpu affinity
- Remove invalid set_dma_ops() call in the iommu driver
- Warning fix for Tegra IOMMU driver
- Suspend/Resume fix for Exynos IOMMU driver
- Probe failure fix for Renesas IOMMU driver
- Cosmetic fix
* tag 'iommu-fixes-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommu/tegra241-cmdqv: Fix warnings due to dmam_free_coherent()
iommu: remove unneeded semicolon
iommu/mediatek: Fix NULL pointer deference in mtk_iommu_device_group
iommu/exynos: Fix suspend/resume with IDENTITY domain
iommu/ipmmu-vmsa: Register in a sensible order
iommu: Clear iommu-dma ops on cleanup
iommu/vt-d: Remove an unnecessary call set_dma_ops()
iommu/vt-d: Wire up irq_ack() to irq_move_irq() for posted MSIs
iommu: Fix crash in report_iommu_fault()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix a recent regression in the ACPI button driver, add quirks
related to EC wakeups from suspend-to-idle and fix coding mistakes
related to the usage of sizeof() in the PPTT parser code:
Summary:
- Add suspend-to-idle EC wakeup quirks for Lenovo Go S (Mario
Limonciello)
- Prevent ACPI button from sending spurions KEY_POWER events to user
space in some cases after a recent update (Mario Limonciello)
- Compute the size of a structure instead of the size of a pointer in
two places in the PPTT parser code (Jean-Marc Eurin)"
* tag 'acpi-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI PPTT: Fix coding mistakes in a couple of sizeof() calls
ACPI: EC: Set ec_no_wakeup for Lenovo Go S
ACPI: button: Only send `KEY_POWER` for `ACPI_BUTTON_NOTIFY_STATUS`
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
"Note that besides two bug fixes this includes three commits for IBM
z17, which was announced this week.
- Add IBM z17 bits:
- Setup elf_platform for new machine types
- Allow to compile the kernel with z17 optimizations
- Add new performance counters
- Fix mismatch between indicator bits and queue indexes in virtio CCW code
- Fix double free in pmu setup error path"
* tag 's390-6.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/cpumf: Fix double free on error in cpumf_pmu_event_init()
s390/cpumf: Update CPU Measurement facility extended counter set support
s390: Allow to compile with z17 optimizations
s390: Add z17 elf platform
s390/virtio_ccw: Don't allocate/assign airqs for non-existing queues
|
|
Merge updates of the ACPI EC and button drivers for 6.15-rc2:
- Add suspend-to-idle EC wakeup quirks for Lenovo Go S (Mario
Limonciello).
- Prevent ACPI button from sending spurions KEY_POWER events to user
space in some cases after a recent update (Mario Limonciello).
* acpi-ec:
ACPI: EC: Set ec_no_wakeup for Lenovo Go S
* acpi-button:
ACPI: button: Only send `KEY_POWER` for `ACPI_BUTTON_NOTIFY_STATUS`
|
|
blk_mq_alloc_disk() already zero-initializes the destination buffer,
making strscpy() sufficient for safely copying the disk's name. The
additional NUL-padding performed by strscpy_pad() is unnecessary.
If the destination buffer has a fixed length, strscpy() automatically
determines its size using sizeof() when the argument is omitted. This
makes the explicit size argument unnecessary.
The source string is also NUL-terminated and meets the __must_be_cstr()
requirement of strscpy().
No functional changes intended.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20250410154727.883207-1-thorsten.blum@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Two WARNINGs are observed when SMMU driver rolls back upon failure:
arm-smmu-v3.9.auto: Failed to register iommu
arm-smmu-v3.9.auto: probe with driver arm-smmu-v3 failed with error -22
------------[ cut here ]------------
WARNING: CPU: 5 PID: 1 at kernel/dma/mapping.c:74 dmam_free_coherent+0xc0/0xd8
Call trace:
dmam_free_coherent+0xc0/0xd8 (P)
tegra241_vintf_free_lvcmdq+0x74/0x188
tegra241_cmdqv_remove_vintf+0x60/0x148
tegra241_cmdqv_remove+0x48/0xc8
arm_smmu_impl_remove+0x28/0x60
devm_action_release+0x1c/0x40
------------[ cut here ]------------
128 pages are still in use!
WARNING: CPU: 16 PID: 1 at mm/page_alloc.c:6902 free_contig_range+0x18c/0x1c8
Call trace:
free_contig_range+0x18c/0x1c8 (P)
cma_release+0x154/0x2f0
dma_free_contiguous+0x38/0xa0
dma_direct_free+0x10c/0x248
dma_free_attrs+0x100/0x290
dmam_free_coherent+0x78/0xd8
tegra241_vintf_free_lvcmdq+0x74/0x160
tegra241_cmdqv_remove+0x98/0x198
arm_smmu_impl_remove+0x28/0x60
devm_action_release+0x1c/0x40
This is because the LVCMDQ queue memory are managed by devres, while that
dmam_free_coherent() is called in the context of devm_action_release().
Jason pointed out that "arm_smmu_impl_probe() has mis-ordered the devres
callbacks if ops->device_remove() is going to be manually freeing things
that probe allocated":
https://lore.kernel.org/linux-iommu/20250407174408.GB1722458@nvidia.com/
In fact, tegra241_cmdqv_init_structures() only allocates memory resources
which means any failure that it generates would be similar to -ENOMEM, so
there is no point in having that "falling back to standard SMMU" routine,
as the standard SMMU would likely fail to allocate memory too.
Remove the unwind part in tegra241_cmdqv_init_structures(), and return a
proper error code to ask SMMU driver to call tegra241_cmdqv_remove() via
impl_ops->device_remove(). Then, drop tegra241_vintf_free_lvcmdq() since
devres will take care of that.
Fixes: 483e0bd8883a ("iommu/tegra241-cmdqv: Do not allocate vcmdq until dma_set_mask_and_coherent")
Cc: stable@vger.kernel.org
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20250407201908.172225-1-nicolinc@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
cocci warnings:
drivers/iommu/dma-iommu.c:1788:2-3: Unneeded semicolon
so remove unneeded semicolon to fix cocci warnings.
Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/tencent_73EEE47E6ECCF538229C9B9E6A0272DA2B05@qq.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Currently, mtk_iommu calls during probe iommu_device_register before
the hw_list from driver data is initialized. Since iommu probing issue
fix, it leads to NULL pointer dereference in mtk_iommu_device_group when
hw_list is accessed with list_first_entry (not null safe).
So, change the call order to ensure iommu_device_register is called
after the driver data are initialized.
Fixes: 9e3a2a643653 ("iommu/mediatek: Adapt sharing and non-sharing pgtable case")
Fixes: bcb81ac6ae3c ("iommu: Get DT/ACPI parsing into the proper probe path")
Reviewed-by: Yong Wu <yong.wu@mediatek.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org> # MT8183 Juniper, MT8186 Tentacruel
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Link: https://lore.kernel.org/r/20250403-fix-mtk-iommu-error-v2-1-fe8b18f8b0a8@collabora.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Commit bcb81ac6ae3c ("iommu: Get DT/ACPI parsing into the proper probe
path") changed the sequence of probing the SYSMMU controller devices and
calls to arm_iommu_attach_device(), what results in resuming SYSMMU
controller earlier, when it is still set to IDENTITY mapping. Such change
revealed the bug in IDENTITY handling in the exynos-iommu driver. When
SYSMMU controller is set to IDENTITY mapping, data->domain is NULL, so
adjust checks in suspend & resume callbacks to handle this case
correctly.
Fixes: b3d14960e629 ("iommu/exynos: Implement an IDENTITY domain")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20250401202731.2810474-1-m.szyprowski@samsung.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
IPMMU registers almost-initialised instances, but misses assigning the
drvdata to make them fully functional, so initial calls back into
ipmmu_probe_device() are likely to fail unnecessarily. Reorder this to
work as it should, also pruning the long-out-of-date comment and adding
the missing sysfs cleanup on error for good measure.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: bcb81ac6ae3c ("iommu: Get DT/ACPI parsing into the proper probe path")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/53be6667544de65a15415b699e38a9a965692e45.1742481687.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
