summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-12-05drm/sun4i: Use values calculated by atomic checkJernej Skrabec
Now that we have properly clipped coordinates in plane state structure, use them. This also fixes bug where source x and y were adjusted for negative value, but width and height weren't. It wasn't discovered because primary plane usually doesn't have negative coordinates. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-13-jernej.skrabec@siol.net
2017-12-05drm/sun4i: Add constraints checking to DE2 driverJernej Skrabec
Since current DE2 driver doesn't know how to scale yet, add atomic check function which checks that. Nice side effect of that function is that populates clipped coordinates and checks visibility of the plane. That data will be used in the future. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-12-jernej.skrabec@siol.net
2017-12-05drm/sun4i: Start using layer id in DE2 driverJernej Skrabec
Till now, plane selection was hardcoded to first overlay in first UI channel and layer parameter is unused. Rename and add parameters to layer functions so they would represent HW more accurately and start using then. It turns out that overlays don't fit well in current DRM design, because they can't be blended together or scaled independetly when they are set to same channel. Because of that, always use only first overlay in each channel. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-11-jernej.skrabec@siol.net
2017-12-05drm/sun4i: Rework enabling plane in DE2 driverJernej Skrabec
If we want to support multiple planes in the future, code which enables pipe has to be moved to appropriate place and it must depend on channel id instead of being hardcoded. Side effect of that rework is definition of default Z position. For now, put first channel at the bottom, second above it and so on. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-10-jernej.skrabec@siol.net
2017-12-05drm/sun4i: Rename some macros in DE2 driverJernej Skrabec
Now that some knowledge of DE2 is gained, rename or add some macros to make code more readable. Max channel macro is removed, since it is not used and it is not clear if it has right value. Structures in BSP driver shows possibility of 5 channels maximum although there is no SoC with such configuration. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-9-jernej.skrabec@siol.net
2017-12-05drm/sun4i: Set blending mode for all channels (DE2)Jernej Skrabec
BSP driver always sets blend mode for all channels, no matter if they are really used or not. Do the same here. The exact meaning of the value is not exactly known, but BSP driver mentions "SRC OVER" and by digging through code some more info can be found. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-8-jernej.skrabec@siol.net
2017-12-05drm/sun4i: Explain color macro in DE2 driverJernej Skrabec
Color attribute have same format troughout the whole driver. Rename macro, add comment with simple explanation and remove redundant definitions. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-7-jernej.skrabec@siol.net
2017-12-05drm/sun4i: Remove setting default values in DE2 driverJernej Skrabec
Premultiply and color key control registers are already set to zero by initialization code few lines above. Furthermore, it seems that colorkeying doesn't really work. It's not used in BSP driver and experiments with it all failed. Just remove the code. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-6-jernej.skrabec@siol.net
2017-12-05drm/sun4i: Fix debug message in DE2Jernej Skrabec
Debug message would print "Enabling" even when disabling plane. Fix it. Fixes: 9d75b8c0b999 (drm/sun4i: add support for Allwinner DE2 mixers) Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-5-jernej.skrabec@siol.net
2017-12-05drm/sun4i: Remove setting alpha mode in DE2 driverJernej Skrabec
Current code sets alpha mode to global alpha mode and global alpha value to 0xff which is totaly opaque. That is not needed for two reasons: - only one plane is active and thus it can be blended only with background, which is black, - it will hinder proper blending when more than one plane is supported Default mode (0) considers pixel alpha value or 0xff if pixel has no alpha information. Global alpha value is ignored in this case. Because of that, just remove the code. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-4-jernej.skrabec@siol.net
2017-12-05drm/sun4i: Rename DE2 RGB format macrosJernej Skrabec
Current RGB formats macros are actually not specific to UI planes. Rename it to something more universal and introduce shift macro. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-3-jernej.skrabec@siol.net
2017-12-05drm/sun4i: Fix format mask in DE2 driverJernej Skrabec
Format mask is one bit too short. Fix it. Fixes: 9d75b8c0b999 (drm/sun4i: add support for Allwinner DE2 mixers) Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-2-jernej.skrabec@siol.net
2017-12-05drm: Document that drm_panel_orientation_quirks.c is shared with fbdevHans de Goede
Add a comment to the DRM_PANEL_ORIENTATION_QUIRKS documenting that the reason for a separate Kconfig for this is because drm_panel_orientation_quirks.c code is shared with fbdev. Suggested-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20171204223321.15799-1-hdegoede@redhat.com
2017-12-05drm/i915/gvt: fix off-by-one comparison of ring_idColin Ian King
The ring_id maximum boundary is being compared using the > operator instead of >=, leading to an off-by-one error and an out of bounds write into array vgpu->hws_pga[]. Fix this by simply using the correct comparison operator. Also re-work another comparison that uses the comparison > I915_NUM_ENGINES - 1 to use the >= idiom using to keep this consistent in this code. Detected by CoverityScan, CID#1462404 ("Out-of-bounds write") Fixes: a2ae95af9646 ("drm/i915/gvt: update CSB and CSB write pointer in virtual HWSP") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2017-12-05drm/i915/gvt: Add missing breaks in switch statementColin Ian King
The switch statement is missing breaks for the cases of GVT_FAILSAFE_INSUFFICIENT_RESOURCE and GVT_FAILSAFE_GUEST_ERR. Add them in. Detected by CoverityScan, CID#1462416 ("Missing break in switch") Fixes: e011c6ce2b4f ("drm/i915/gvt: Add VM healthy check for workload_thread") Fixes: a33fc7a0482a ("drm/i915/gvt: enter failsafe mode when guest requires more resources") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2017-12-05Merge branch 'drm/next/du' of git://linuxtv.org/pinchartl/media into drm-nextDave Airlie
The series contains one patch that touches the V4L2 VSP driver. Mauro has acked it for merge through your tree, it doesn't conflict with anything scheduled for merge in v4.16 through Mauro's tree. * 'drm/next/du' of git://linuxtv.org/pinchartl/media: drm: rcar-du: Clip planes to screen boundaries drm: rcar-du: Share plane atomic check code between Gen2 and Gen3 v4l: vsp1: Start and stop DRM pipeline independently of planes drm: rcar-du: Remove unused CRTC suspend/resume functions drm: rcar-du: Implement system suspend/resume support drm: rcar-du: Don't set connector DPMS property drm: rcar-du: Add R8A7745 support drm: rcar-du: Add R8A7743 support dt-bindings: display: rcar-du: Document R8A774[35] DU
2017-12-04fbcon: Remove dmi quirk tableHans de Goede
This is now all handled in the drivers and communicated through fb_info.fbcon_rotate_hint. Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171125193553.23986-8-hdegoede@redhat.com
2017-12-04efifb: Set info->fbcon_rotate_hint based on drm_get_panel_orientation_quirkHans de Goede
On some hardware the LCD panel is not mounted upright in the casing, but rotated by 90 degrees. In this case we want the console to automatically be rotated to compensate. The drm subsys has a quirk table for this, use the drm_get_panel_orientation_quirk function to get the panel orientation and set info->fbcon_rotate_hint based on this, so that the fbcon console on top of efifb gets automatically rotated to compensate for the panel orientation. Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171125193553.23986-7-hdegoede@redhat.com
2017-12-04drm/i915: Add "panel orientation" property to the panel connector, v6.Hans de Goede
Ideally we could use the VBT for this, that would be simple, in intel_dsi_init() check dev_priv->vbt.dsi.config->rotation, set connector->display_info.panel_orientation accordingly and call drm_connector_init_panel_orientation_property(), done. Unfortunately vbt.dsi.config->rotation is always 0 even on tablets with an upside down LCD and where the GOP is properly rotating the EFI fb in hardware. So instead we end up reading the rotation from the primary plane. This commit only implements the panel orientation property for DSI panels on BYT / CHT hardware, as all known non normal oriented panels sofar are only found on this hardware. Changes in v2: -Read back the rotation applied by the GOP from the primary plane instead of relying on dev_priv->vbt.dsi.config->rotation, because it seems that the VBT rotation filed is always 0 even on devices where the GOP does apply a rotation Changes in v3: -Rewrite the code to read back the orientation from the primary plane to contain all of this in intel_dsi.c instead of poking a bunch of holes between all the different layers Changes in v6: -Move hardware readout to intel_dsi_init() Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171125193553.23986-6-hdegoede@redhat.com
2017-12-04drm/fb-helper: Apply panel orientation connector prop to the primary plane, v6.Hans de Goede
Apply the "panel orientation" drm connector prop to the primary plane so that fbcon and fbdev using userspace programs display the right way up. Changes in v3: -Use a rotation member in struct drm_fb_helper_crtc and set that from drm_setup_crtcs instead of looping over all crtc's to find the right one later -Since we now no longer look at rotation quirks directly in the fbcon code, set fb_info.fbcon_rotate_hint when the panel is not mounted upright and we cannot use hardware rotation Changes in v4: -Make drm_fb_helper_init() init drm_fb_helper_crtc.rotation to DRM_MODE_ROTATE_0 for all crtcs, so that we do not end up setting the plane_state's rotation to an invalid value for disabled crtcs (caught by Fi.CI) Changes in v5: -Only use hardware (crtc primary plane) rotation for DRM_ROTATE_180, 90 / 270 degree rotation requires special handling which we lack atm -Add a TODO comment for 90 / 270 degree hardware rotation -Add some comments to better document the default case when mapping sw_rotations to fbcon_rotate_hints Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=94894 Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171125193553.23986-5-hdegoede@redhat.com
2017-12-04drm: Add support for a panel-orientation connector property, v6Hans de Goede
On some devices the LCD panel is mounted in the casing in such a way that the up/top side of the panel does not match with the top side of the device (e.g. it is mounted upside-down). This commit adds the necessary infra for lcd-panel drm_connector-s to have a "panel orientation" property to communicate how the panel is orientated vs the casing. Userspace can use this property to check for non-normal orientation and then adjust the displayed image accordingly by rotating it to compensate. Changes in v2: -Store panel_orientation in drm_display_info, so that drm_fb_helper.c can access it easily -Have a single drm_connector_init_panel_orientation_property rather then create and attach functions. The caller is expected to set drm_display_info.panel_orientation before calling this, then this will check for platform specific quirks overriding the panel_orientation and if the panel_orientation is set after this then it will attach the property. Changes in v6: -Use an enum (with kerneldoc) rather then #defines for DRM_MODE_PANEL_ORIENTATION_* Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171125193553.23986-4-hdegoede@redhat.com
2017-12-04drm: Add panel orientation quirks, v6.Hans de Goede
Some x86 clamshell design devices use portrait tablet screens and a display engine which cannot rotate in hardware, so the firmware just leaves things as is and we cannot figure out that the display is oriented non upright from the hardware. So at least on x86, we need a quirk table for this. This commit adds a DMI based quirk table which is initially populated with 5 such devices: Asus T100HA, GPD Pocket, GPD win, I.T.Works TW891 and the VIOS LTH17. This quirk table will be used by the drm code to let userspace know that the display is not mounted upright inside the devices case through a new panel orientation drm-connector property, as well as to tell fbcon to rotate the console so that it shows the right way up. Changes in v5: -Add a kernel-doc comment documenting drm_get_panel_orientation_quirk() -Remove board_* matches from the dmi-matches for the VIOS LTH17 laptop, keeping only the (identical) sys_vendor and product_name matches. This is necessary because an older version of the bios has board_vendor set to VOIS instead of VIOS Changes in v6: -Add reference to added kernel-docs in Documentation/gpu/drm-kms-helpers.rst Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171125193553.23986-3-hdegoede@redhat.com
2017-12-04fbcon: Add fbcon_rotate_hint to struct fb_infoHans de Goede
On some hardware the LCD panel is not mounted upright in the casing, but upside-down or rotated 90 degrees. In this case we want the console to automatically be rotated to compensate. The fbdev-driver may know about the need to rotate. Add a new fbcon_rotate_hint field to struct fb_info, which gets initialized to -1. If the fbdev-driver knows that some sort of rotation is necessary then it can set this field to a FB_ROTATE_* value to tell the fbcon console driver to rotate the console. Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171125193553.23986-2-hdegoede@redhat.com
2017-12-04amdgpu/dm: Remove fb_location form fill_plane_attributesHarry Wentland
We no longer set the framebuffer address here so this is now dead code. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04drm/amdgpu:fix gpu recover missing skipping(v2)Monk Liu
if app close CTX right after IB submit, gpu recover will fail to find out the entity behind this guilty job thus lead to no job skipping for this guilty job. to fix this corner case just move the increasement of job->karma out of the entity iteration. v2: only do karma increasment if bad->s_priority != KERNEL because we always consider KERNEL job be correct and always want to recover an unfinished kernel job (sometimes kernel job is interrupted by VF FLR or other GPU hang event) Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-By: Xiangliang Yu <Xiangliang.Yu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04drm/amdgpu:read VRAMLOST from gimMonk Liu
Signed-off-by: Monk Liu <Monk.Liu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04drm/amdgpu: bypass FB resizing for SRIOV VFpding
It introduces 900ms latency in exclusive mode which causes failure of driver loading. Host can resize the BAR before guest staring, so the resizing is not necessary here. Signed-off-by: Pixel Ding <Pixel.Ding@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04drm/amdgpu: release exclusive mode after hw_initpding
Signed-off-by: pding <Pixel.Ding@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04drm/amdkfd: initialise kfd inside amdgpu_device_initpding
Also finalize kfd inside amdgpu_device_fini. kfd device_init needs SRIOV exclusive accessing. Try to gather exclusive accessing to reduce time consuming. Signed-off-by: pding <Pixel.Ding@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04drm/amdgpu: don't use ttm_bo_move_ttm in amdgpu_ttm_bind v2Christian König
Just allocate the GART space and fill it. This prevents forcing the BO to be idle. v2: don't unbind/bind at all, just fill the allocated GART space Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04drm/amdgpu: rename amdgpu_ttm_bind to amdgpu_ttm_alloc_gartChristian König
We actually don't bind here, but rather allocate GART space if necessary. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04drm/amdgpu: switch to use new SOC15 reg read/write macros for soc15 ihHawking Zhang
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04drm/amdgpu: resize VRAM BAR for CPU access v6Christian König
Try to resize BAR0 to let CPU access all of VRAM. v2: rebased, style cleanups, disable mem decode before resize, handle gmc_v9 as well, round size up to power of two. v3: handle gmc_v6 as well, release and reassign all BARs in the driver. v4: rename new function to amdgpu_device_resize_fb_bar, reenable mem decoding only if all resources are assigned. v5: reorder resource release, return -ENODEV instead of BUG_ON(). v6: squash in rebase fix Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04drm/amdgpu: refine SR-IOV firmware VRAM reservation to protect dataHorace Chen
The previous solution will create a zero buffer on the system domain and then move the zeroes to the VRAM. This will break the original data on the VRAM. Refine the code to create bo on VRAM domain directly and then remove and re-create mem node to the exact position before bo_pin. This can avoid breaking the data and will not cause eviction. Signed-off-by: Horace Chen <horace.chen@amd.com> Reviewed-by: monk liu <monk.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04drm/amdgpu: retry init if exclusive mode request is failedpding
This is caused of that hypervisor fails to handle request, one known issue is MMIO unblocking timeout. In theory we can retry init here. Signed-off-by: pding <Pixel.Ding@amd.com> Reviewed-by: Xiangliang Yu <Xiangliang.Yu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04drm/amdgpu: return error when sriov access requests get timeoutpding
Reported-by: Sun Gary <Gary.Sun@amd.com> Signed-off-by: pding <Pixel.Ding@amd.com> Reviewed-by: Xiangliang Yu <Xiangliang.Yu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04drm/amd/display: Remove fb_location parameter from get_fb_infoMichel Dänzer
It's dead code. Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04amdgpu: Remove AMDGPU_{HPD,CRTC_IRQ,PAGEFLIP_IRQ}_LASTMichel Dänzer
Not used anymore. Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04drm/amd/display: Use real number of CRTCs and HPDs in set_irq_funcsMichel Dänzer
Corresponding to the previous non-DC change. Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04amdgpu/dce: Use actual number of CRTCs and HPDs in set_irq_funcsMichel Dänzer
Hardcoding the maximum numbers could result in spurious error messages from the IRQ state callbacks, e.g. on Polaris 11/12: [drm:dce_v11_0_set_pageflip_irq_state [amdgpu]] *ERROR* invalid pageflip crtc 5 [drm:amdgpu_irq_disable_all [amdgpu]] *ERROR* error disabling interrupt (-22) Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04drm/amd/display: Move conn_state to headerHarry Wentland
We'll need it in amdgpu_dm_mst_types.c as well. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04drm/amd/display: dal 3.1.10Tony Cheng
Signed-off-by: Tony Cheng <tony.cheng@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04drm/amd/display: correct DP is always in full range or bt609Charlene Liu
Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04drm/amd/display: fix bug from last commit for hubbubYue Hin Lau
fix memory leak Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04drm/amd/display: Move hdr_metadata from plane to streamAnthony Koo
Need to move HDR Metadata from Surface to Stream since there is only one infoframe possible per stream. Also cleaning up some duplicate definitions. Signed-off-by: Anthony Koo <anthony.koo@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04drm/amd/display: Apply VQ adjustments in MPO caseSivapiriyanKumarasamy
Signed-off-by: SivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04drm/amd/display: create new structure for hubbubYue Hin Lau
instantiating new structure hubbub in resource.c Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04drm/amd/display: dal 3.1.09Tony Cheng
Signed-off-by: Tony Cheng <tony.cheng@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04drm/amd/display: Added disconnect dchub.Yongqiang Sun
Add disable ttu interface to dcn10, when remove mpc, disable ttu as well. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04drm/amd/display: dal 3.1.08Tony Cheng
Signed-off-by: Tony Cheng <tony.cheng@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-09-12 11:02:54 +0000