summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-11-30RISC-V: Clean up an unused includePalmer Dabbelt
We used to have some cmpxchg syscalls. They're no longer there, so we no longer need the include. CC: Christoph Hellwig <hch@infradead.org> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2017-11-30RISC-V: Allow userspace to flush the instruction cacheAndrew Waterman
Despite RISC-V having a direct 'fence.i' instruction available to userspace (which we can't trap!), that's not actually viable when running on Linux because the kernel might schedule a process on another hart. There is no way for userspace to handle this without invoking the kernel (as it doesn't know the thread->hart mappings), so we've defined a RISC-V specific system call to flush the instruction cache. This patch adds both a system call and a VDSO entry. If possible, we'd like to avoid having the system call be considered part of the user-facing ABI and instead restrict that to the VDSO entry -- both just in general to avoid having additional user-visible ABI to maintain, and because we'd prefer that users just call the VDSO entry because there might be a better way to do this in the future (ie, one that doesn't require entering the kernel). Signed-off-by: Andrew Waterman <andrew@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2017-11-30RISC-V: Flush I$ when making a dirty page executableAndrew Waterman
The RISC-V ISA allows for instruction caches that are not coherent WRT stores, even on a single hart. As a result, we need to explicitly flush the instruction cache whenever marking a dirty page as executable in order to preserve the correct system behavior. Local instruction caches aren't that scary (our implementations actually flush the cache, but RISC-V is defined to allow higher-performance implementations to exist), but RISC-V defines no way to perform an instruction cache shootdown. When explicitly asked to do so we can shoot down remote instruction caches via an IPI, but this is a bit on the slow side. Instead of requiring an IPI to all harts whenever marking a page as executable, we simply flush the currently running harts. In order to maintain correct behavior, we additionally mark every other hart as needing a deferred instruction cache which will be taken before anything runs on it. Signed-off-by: Andrew Waterman <andrew@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2017-11-30RISC-V: Add missing includeOlof Johansson
Fixes: include/asm-generic/mm_hooks.h:20:11: warning: 'struct vm_area_struct' declared inside parameter list will not be visible outside of this definition or declaration include/asm-generic/mm_hooks.h:19:38: warning: 'struct mm_struct' declared inside parameter list will not be visible outside of this definition or declaration Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2017-11-30RISC-V: Use define for get_cycles like other architecturesOlof Johansson
Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2017-11-30RISC-V: Provide stub of setup_profiling_timer()Olof Johansson
Fixes the following on allmodconfig build: profile.c:(.text+0x3e4): undefined reference to `setup_profiling_timer' Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2017-11-30RISC-V: Export some expected symbols for modulesOlof Johansson
These are the ones needed by current allmodconfig, so add them instead of everything other architectures are exporting -- the rest can be added on demand later if needed. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2017-11-30RISC-V: move empty_zero_page definition to C and export itOlof Johansson
Needed by some modules (exported by other architectures). Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2017-11-30RISC-V: io.h: type fixes for warningsOlof Johansson
include <linux/types.h> for __iomem definition. Also, add volatile to iounmap() like other architectures have it to avoid "discarding volatile" warnings from some drivers. Finally, explicitly promote the base address for INB/OUTB functions to avoid some old legacy drivers complaining about int-to-ptr promotions. The drivers are unlikely to work but they're included in allmodconfig so the warnings are noisy. Fixes, among other warnings, these with allmodconfig: ../arch/riscv/include/asm/io.h:24:21: error: expected '=', ',', ';', 'asm' or '__attribute__' before '*' token extern void __iomem *ioremap(phys_addr_t offset, unsigned long size); sound/pci/echoaudio/echoaudio.c: In function 'snd_echo_free': sound/pci/echoaudio/echoaudio.c:1879:10: warning: passing argument 1 of 'iounmap' discards 'volatile' qualifier from pointer target type [-Wdiscarded-qualifiers] Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2017-11-30RISC-V: use RISCV_{INT,SHORT} instead of {INT,SHORT} for asm macrosOlof Johansson
INT and SHORT are used by some drivers that pull in the include files, so prefixing helps avoid namespace conflicts. Other constructs in the same file already uses this. Fixes, among others, these warnings with allmodconfig: ../sound/core/pcm_misc.c:43:0: warning: "INT" redefined #define INT __force int Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2017-11-30RISC-V: use generic serial.hOlof Johansson
Fixes this from allmodconfig: drivers/tty/serial/earlycon.c:27:10: fatal error: asm/serial.h: No such file or directory Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2017-11-30drm/i915: Tidy up signed/unsigned comparisonChris Wilson
drivers/gpu/drm/i915/i915_irq.c|3096 col 29| error: comparison between signed and unsigned integer expressions [-Werror=sign-compare] Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171130125253.21405-1-chris@chris-wilson.co.uk Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
2017-11-30drm/docs: Add todo entry for simple modeset suspend/resumeNoralf Trønnes
Add entry for conversion of drivers to new helpers. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20171106191812.38927-7-noralf@tronnes.org
2017-11-30drm/tinydrm: Use drm_mode_config_helper_suspend/resume()Noralf Trønnes
Replace driver's code with the generic helpers that do the same thing. Remove todo entry. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Stefan Agner <stefan@agner.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20171106191812.38927-6-noralf@tronnes.org
2017-11-30drm/arm/mali: Use drm_mode_config_helper_suspend/resume()Noralf Trønnes
Replace driver's code with the generic helpers that do the same thing. Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Brian Starkey <brian.starkey@arm.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171106191812.38927-4-noralf@tronnes.org
2017-11-30drm/modeset-helper: Add simple modeset suspend/resume helpersNoralf Trønnes
Add drm_mode_config_helper_suspend/resume() which takes care of atomic modeset suspend/resume for simple use cases. The suspend state is stored in struct drm_mode_config. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20171106191812.38927-3-noralf@tronnes.org
2017-11-30drm/probe-helper: Fix drm_kms_helper_poll_enable() docsNoralf Trønnes
Fix docs to reflect code and drm_kms_helper_poll_disable() docs by saying that calling drm_kms_helper_poll_enable() is fine even if output polling is not enabled. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20171106191812.38927-2-noralf@tronnes.org
2017-11-30SUNRPC: Handle ENETDOWN errorsTrond Myklebust
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2017-11-30xfs: Properly retry failed dquot items in case of error during buffer writebackCarlos Maiolino
Once the inode item writeback errors is already fixed, it's time to fix the same problem in dquot code. Although there were no reports of users hitting this bug in dquot code (at least none I've seen), the bug is there and I was already planning to fix it when the correct approach to fix the inodes part was decided. This patch aims to fix the same problem in dquot code, regarding failed buffers being unable to be resubmitted once they are flush locked. Tested with the recently test-case sent to fstests list by Hou Tao. Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-11-30xfs: scrub inode mode properlyDarrick J. Wong
Since we've used up all the bits in i_mode, the existing mode check doesn't actually do anything useful. However, we've not used all the bit values in the format portion of i_mode, so we /do/ need to test that for bad values. Fixes: 80e4e1268 ("xfs: scrub inodes") Fixes-coverity-id: 1423992 Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
2017-11-30xfs: remove unused parameter from xfs_writepage_mapDarrick J. Wong
The first thing that xfs_writepage_map does is clobber the offset parameter. Since we never use the passed-in value, turn the parameter into a local variable. This gets rid of an UBSAN warning in generic/466. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
2017-11-30xfs: ubsan fixesDarrick J. Wong
Fix some complaints from the UBSAN about signed integer addition overflows. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
2017-11-30Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM fixes from Paolo Bonzini: - x86 bugfixes: APIC, nested virtualization, IOAPIC - PPC bugfix: HPT guests on a POWER9 radix host * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (26 commits) KVM: Let KVM_SET_SIGNAL_MASK work as advertised KVM: VMX: Fix vmx->nested freeing when no SMI handler KVM: VMX: Fix rflags cache during vCPU reset KVM: X86: Fix softlockup when get the current kvmclock KVM: lapic: Fixup LDR on load in x2apic KVM: lapic: Split out x2apic ldr calculation KVM: PPC: Book3S HV: Fix migration and HPT resizing of HPT guests on radix hosts KVM: vmx: use X86_CR4_UMIP and X86_FEATURE_UMIP KVM: x86: Fix CPUID function for word 6 (80000001_ECX) KVM: nVMX: Fix vmx_check_nested_events() return value in case an event was reinjected to L2 KVM: x86: ioapic: Preserve read-only values in the redirection table KVM: x86: ioapic: Clear Remote IRR when entry is switched to edge-triggered KVM: x86: ioapic: Remove redundant check for Remote IRR in ioapic_set_irq KVM: x86: ioapic: Don't fire level irq when Remote IRR set KVM: x86: ioapic: Fix level-triggered EOI and IOAPIC reconfigure race KVM: x86: inject exceptions produced by x86_decode_insn KVM: x86: Allow suppressing prints on RDMSR/WRMSR of unhandled MSRs KVM: x86: fix em_fxstor() sleeping while in atomic KVM: nVMX: Fix mmu context after VMLAUNCH/VMRESUME failure KVM: nVMX: Validate the IA32_BNDCFGS on nested VM-entry ...
2017-11-30Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Martin Schwidefsky: - SPDX identifiers are added to more of the s390 specific files. - The ELF_ET_DYN_BASE base patch from Kees is reverted, with the change some old 31-bit programs crash. - Bug fixes and cleanups. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (29 commits) s390/gs: add compat regset for the guarded storage broadcast control block s390: revert ELF_ET_DYN_BASE base changes s390: Remove redundant license text s390: crypto: Remove redundant license text s390: include: Remove redundant license text s390: kernel: Remove redundant license text s390: add SPDX identifiers to the remaining files s390: appldata: add SPDX identifiers to the remaining files s390: pci: add SPDX identifiers to the remaining files s390: mm: add SPDX identifiers to the remaining files s390: crypto: add SPDX identifiers to the remaining files s390: kernel: add SPDX identifiers to the remaining files s390: sthyi: add SPDX identifiers to the remaining files s390: drivers: Remove redundant license text s390: crypto: Remove redundant license text s390: virtio: add SPDX identifiers to the remaining files s390: scsi: zfcp_aux: add SPDX identifier s390: net: add SPDX identifiers to the remaining files s390: char: add SPDX identifiers to the remaining files s390: cio: add SPDX identifiers to the remaining files ...
2017-11-30drm/i915: Enable IPS with only sprite plane visible too, v4.Maarten Lankhorst
This comment predates atomic, and I think with the way we currently track IPS, it's safe to enable this for the case we switch too. Changes since v1: - Keep IPS enabled when switching planes. Changes since v2: - Enable IPS when at least one plane is enabled. (Ville) Changes since v3: - Actually do what was advertised in v3, sigh! (Ville, CI) Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171122183906.47767-1-maarten.lankhorst@linux.intel.com Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2017-11-30drm/i915: Make ips_enabled a property depending on whether IPS is enabled, v3.Maarten Lankhorst
ips_enabled was used as a variable of whether IPS can be enabled or not, but should be used to test whether IPS is actually enabled. Changes since v1: - Call needs_modeset on new crtc state. (Ville) - IPS can be enabled with sprite plane enabled too. (Ville) - Fix CDCLK vs IPS workaround. (Ville) Changes since v2: - Only re-enable fastset when inheriting mode. (Ville) - Put the conditions for enabling and disabling IPS in a helper. Changes since v3: - Keep the max_cdclk workaround working. (Ville) - Also check logical cdclk out of paranoia. - Remove planes check from IPS disable function for initial disable. - Remove assert_plane_enabled/disabled checks and use crtc_state->active_planes for hsw_enable_ips only, always allow calling hsw_disable_ips to disable it initially in hw. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171122183901.47720-1-maarten.lankhorst@linux.intel.com [mlankhorst: pipe_config -> crtc_state (Ville)] Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2017-11-30drm/sun4i: use sun4i_tcon_of_table to check if a device node is a TCONChen-Yu Tsai
The sun4i DRM driver maintains a list of compatible strings it uses to check if a device node within the display component graph is a TCON. The TCON driver also has this list, used to bind the TCON driver to the device. These two lists are identical. Instead of maintaining two identical lists, export the list from the TCON driver for the DRM driver to use. Suggested-by: Rob Herring <robh@kernel.org> Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171127084632.25511-1-wens@csie.org
2017-11-30drm/imx: always call wait_for_flip_done in commit_tailLucas Stach
drm_atomic_helper_wait_for_vblanks will go away in the future. The new drm_atomic_helper_setup_commit in 4.15 expects that blocking commits have completed flipping before the commit_tail returns. This must be ensured by calling wait_for_vblanks or wait_for_flip_done, where flip_done might do a less agressive wait, which is fine for imx-drm. Fixes: 080de2e5be2d (drm/atomic: Check for busy planes/connectors before setting the commit) Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-11-30Merge branch 'acpi-ec' into acpiRafael J. Wysocki
* acpi-ec: ACPI / EC: Fix regression related to PM ops support in ECDT device
2017-11-30Merge branch 'pm-tools'Rafael J. Wysocki
* pm-tools: cpupower : Fix cpupower working when cpu0 is offline cpupowerutils: bench - Fix cpu online check
2017-11-30drm/i915: Avoid PPS HW/SW state mismatch due to roundingImre Deak
We store a SW state of the t11_t12 timing in 100usec units but have to program it in 100msec as required by HW. The rounding used during programming means there will be a mismatch between the SW and HW states of this value triggering a "PPS state mismatch" error. Avoid this by storing the already rounded-up value in the SW state. Note that we still calculate panel_power_cycle_delay with the finer 100usec granularity to avoid any needless waits using that version of the delay. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103903 Cc: joks <joks@linux.pl> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171129175137.2889-1-imre.deak@intel.com
2017-11-30drm/i915: Skip switch-to-kernel-context on suspend when wedgedChris Wilson
If the HW is already wedged, attempting to submit a request will generate an -EIO. If we tried this during suspend, we would abort whereas all we want to do is to go sleep and throw away the corrupt state. Fixes: 5ab57c702069 ("drm/i915: Flush logical context image out to memory upon suspend") Testcase: igt/gem_eio/suspend Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171130102951.14965-1-chris@chris-wilson.co.uk
2017-11-30drm/i915/glk: Apply WaProgramL3SqcReg1DefaultForPerf for GLK tooValtteri Rantala
Testing the texture read performance shows that the same tuning for the SQ credits is needed on GLK as on BXT/APL. This has been also confirmed by Altug from the HW team. V4: Rebase + fix Signed-off-by: Valtteri Rantala <valtteri.rantala@intel.com> Reviewed-by: David Weinehall <david.weinehall@linux.intel.com> (v1) Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1511880305-12166-1-git-send-email-valtteri.rantala@intel.com
2017-11-30omapdrm: hdmi4_cec: signedness bug in hdmi4_cec_init()Dan Carpenter
"ret" needs to be signed for the error handling to work. Fixes: 8d7f934df8d8 ("omapdrm: hdmi4_cec: add OMAP4 HDMI CEC support") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-11-30drm: omapdrm: Fix DPI on platforms using the DSI VDDSLaurent Pinchart
Commit d178e034d565 ("drm: omapdrm: Move FEAT_DPI_USES_VDDS_DSI feature to dpi code") replaced usage of platform data version with SoC matching to configure DPI VDDS. The SoC match entries were incorrect, they should have matched on the machine name instead of the SoC family. Fix it. The result was observed on OpenPandora with OMAP3530 where the panel only had the Blue channel and Red&Green were missing. It was not observed on GTA04 with DM3730. Fixes: d178e034d565 ("drm: omapdrm: Move FEAT_DPI_USES_VDDS_DSI feature to dpi code") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reported-by: H. Nikolaus Schaller <hns@goldelico.com> Tested-by: H. Nikolaus Schaller <hns@goldelico.com> Cc: stable@vger.kernel.org # 4.14 Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-11-30omapdrm: hdmi4: Correct the SoC revision matchingPeter Ujfalusi
I believe the intention of the commit 2c9fc9bf45f8 ("drm: omapdrm: Move FEAT_HDMI_* features to hdmi4 driver") was to identify omap4430 ES1.x, omap4430 ES2.x and other OMAP4 revisions, like omap4460. By using family=OMAP4 in the match the code will treat omap4460 ES1.x in a same way as it would treat omap4430 ES1.x This breaks HDMI audio on OMAP4460 devices (PandaES for example). Correct the match rule so we are not going to get false positive match. Fixes: 2c9fc9bf45f8 ("drm: omapdrm: Move FEAT_HDMI_* features to hdmi4 driver") Cc: stable@vger.kernel.org # 4.14 Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-11-30drm/omap: displays: panel-dpi: add backlight dependencyArnd Bergmann
The new backlight code causes a link failure when backlight support itself is disabled: drivers/gpu/drm/omapdrm/displays/panel-dpi.o: In function `panel_dpi_probe_of': panel-dpi.c:(.text+0x35c): undefined reference to `of_find_backlight_by_node' This adds a Kconfig dependency like we have for the other OMAP display targets. Fixes: 39135a305a0f ("drm/omap: displays: panel-dpi: Support for handling backlight devices") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-11-30drm/omap: Fix error handling path in 'omap_dmm_probe()'Christophe JAILLET
If we don't find a matching device node, we must free the memory allocated in 'omap_dmm' a few lines above. Fixes: 7cb0d6c17b96 ("drm/omap: fix TILER on OMAP5") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-11-30drm/i915: Disable THP until we have a GPU read BW W/AJoonas Lahtinen
We seem to be missing some W/A for 2M pages and are getting a hit on raw GPU read bandwidths (even 30%) even though the GPU write bandwidths improve (even 10%). For now, disable THP, which is our only practical source of 2M pages until we have a W/A for the issue. v2: - Be explicit that we talk about GPU bandwidths (Eero) - s/deny/never/ because that's why (Chris) Reported-by: Valtteri Rantala <valtteri.rantala@intel.com> Fixes: b901bb89324a ("drm/i915/gemfs: enable THP") Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Valtteri Rantala <valtteri.rantala@intel.com> Cc: Eero Tamminen <eero.t.tamminen@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Tested-by: Valtteri Rantala <valtteri.rantala@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171127091233.7001-1-joonas.lahtinen@linux.intel.com (cherry picked from commit 9987da4b5dcfc8b94b702d4bb94b30955eb73c75) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2017-11-30drm/bridge: tc358767: add copyright linesAndrey Gusakov
Add copyright lines for Zodiac who paid for driver development. Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com> Acked-by: Chris Healy <cphealy@gmail.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1510073785-16108-8-git-send-email-andrey.gusakov@cogentembedded.com
2017-11-30drm/bridge: tc358767: fix 1-lane behaviorAndrey Gusakov
Use drm_dp_channel_eq_ok helper Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1510073785-16108-7-git-send-email-andrey.gusakov@cogentembedded.com
2017-11-30drm/bridge: tc358767: fix AUXDATAn registers accessAndrey Gusakov
First four bytes should go to DP0_AUXWDATA0. Due to bug if len > 4 first four bytes was writen to DP0_AUXWDATA1 and all data get shifted by 4 bytes. Fix it. Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1510073785-16108-6-git-send-email-andrey.gusakov@cogentembedded.com
2017-11-30drm/bridge: tc358767: fix timing calculationsAndrey Gusakov
Fields in HTIM01 and HTIM02 regs should be even. Recomended thresh_dly value is max_tu_symbol. Remove set of VPCTRL0.VSDELAY as it is related to DSI input interface. Currently driver supports only DPI. Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1510073785-16108-5-git-send-email-andrey.gusakov@cogentembedded.com
2017-11-30drm/bridge: tc358767: fix DP0_MISC register setAndrey Gusakov
Remove shift from TU_SIZE_RECOMMENDED define as it used to calculate max_tu_symbols. Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1510073785-16108-4-git-send-email-andrey.gusakov@cogentembedded.com
2017-11-30drm/bridge: tc358767: filter out too high modesAndrey Gusakov
Pixel clock limitation for DPI is 154 MHz. Do not accept modes with higher pixel clock rate. Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1510073785-16108-3-git-send-email-andrey.gusakov@cogentembedded.com
2017-11-30drm/bridge: tc358767: do no fail on hi-res displaysAndrey Gusakov
Do not fail data rates higher than 2.7 and more than 2 lanes. Try to fall back to 2.7Gbps and 2 lanes. Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1510073785-16108-2-git-send-email-andrey.gusakov@cogentembedded.com
2017-11-30drm/bridge: Fix lvds-encoder since the panel_bridge rework.Eric Anholt
The panel_bridge bridge attaches to the panel's OF node, not the lvds-encoder's node. Put in a little no-op bridge of our own so that our consumers can still find a bridge where they expect. This also fixes an unintended unregistration and leak of the panel-bridge on module remove. Signed-off-by: Eric Anholt <eric@anholt.net> Fixes: 13dfc0540a57 ("drm/bridge: Refactor out the panel wrapper from the lvds-encoder bri dge.") Tested-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: https://patchwork.freedesktop.org/patch/msgid/20171114191647.22207-1-eric@anholt.net
2017-11-30drm/bridge: synopsys/dw-hdmi: Enable cec clockPierre-Hugues Husson
Support the "cec" optional clock. The documentation already mentions "cec" optional clock and it is used by several boards, but currently the driver doesn't enable it, thus preventing cec from working on those boards. And even worse: a /dev/cecX device will appear for those boards, but it won't be functioning without configuring this clock. Changes: v4: - Change commit message to stress the importance of this patch v3: - Drop useless braces v2: - Separate ENOENT errors from others - Propagate other errors (especially -EPROBE_DEFER) Signed-off-by: Pierre-Hugues Husson <phh@phh.me> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: https://patchwork.freedesktop.org/patch/msgid/20171125201844.11353-1-phh@phh.me
2017-11-30drm/bridge: adv7511/33: Fix adv7511_cec_init() failure handlingHans Verkuil
If the device tree for a board did not specify a cec clock, then adv7511_cec_init would return an error, which would cause adv7511_probe() to fail and thus there is no HDMI output. There is no need to have adv7511_probe() fail if the CEC initialization fails, so just change adv7511_cec_init() to a void function. In addition, adv7511_cec_init() should just return silently if the cec clock isn't found and show a message for any other errors. An otherwise correct cleanup patch from Dan Carpenter turned this broken failure handling into a kernel Oops, so bisection points to commit 7af35b0addbc ("drm/kirin: Checking for IS_ERR() instead of NULL") rather than 3b1b975003e4 ("drm: adv7511/33: add HDMI CEC support"). Based on earlier patches from Arnd and John. Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Cc: Xinliang Liu <xinliang.liu@linaro.org> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Archit Taneja <architt@codeaurora.org> Cc: John Stultz <john.stultz@linaro.org> Link: https://bugs.linaro.org/show_bug.cgi?id=3345 Link: https://lkft.validation.linaro.org/scheduler/job/48017#L3551 Fixes: 7af35b0addbc ("drm/kirin: Checking for IS_ERR() instead of NULL") Fixes: 3b1b975003e4 ("drm: adv7511/33: add HDMI CEC support") Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: https://patchwork.freedesktop.org/patch/msgid/9097b2a4-b6b9-5fca-e039-0a17694b1143@xs4all.nl
2017-11-29Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Mergr misc fixes from Andrew Morton: "28 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (28 commits) fs/hugetlbfs/inode.c: change put_page/unlock_page order in hugetlbfs_fallocate() mm/hugetlb: fix NULL-pointer dereference on 5-level paging machine autofs: revert "autofs: fix AT_NO_AUTOMOUNT not being honored" autofs: revert "autofs: take more care to not update last_used on path walk" fs/fat/inode.c: fix sb_rdonly() change mm, memcg: fix mem_cgroup_swapout() for THPs mm: migrate: fix an incorrect call of prep_transhuge_page() kmemleak: add scheduling point to kmemleak_scan() scripts/bloat-o-meter: don't fail with division by 0 fs/mbcache.c: make count_objects() more robust Revert "mm/page-writeback.c: print a warning if the vm dirtiness settings are illogical" mm/madvise.c: fix madvise() infinite loop under special circumstances exec: avoid RLIMIT_STACK races with prlimit() IB/core: disable memory registration of filesystem-dax vmas v4l2: disable filesystem-dax mapping support mm: fail get_vaddr_frames() for filesystem-dax mappings mm: introduce get_user_pages_longterm device-dax: implement ->split() to catch invalid munmap attempts mm, hugetlbfs: introduce ->split() to vm_operations_struct scripts/faddr2line: extend usage on generic arch ...
generated by cgit (git 2.34.1) at 2025-09-13 04:57:05 +0000