summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-02-07media: iris: add support for dynamic resolution changeDikshita Agarwal
Handle the response sent by the firmware, when a source change is detected. Read the subscribed parameter to get the changed values. Raise the source change event to the client and update the instance sub-state. Mark the last buffer from before the source change with the V4L2_BUF_FLAG_LAST flag and return to the client. Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345) Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-07media: iris: implement vb2 ops for buf_queue and firmware responseDikshita Agarwal
Implement the vb2 ops for the buf queue. These are the different buffer attributes: BUF_ATTR_DEFERRED - buffer queued by the client but not submitted to firmware. BUF_ATTR_PENDING_RELEASE - buffers requested to be released from the firmware. BUF_ATTR_QUEUED - buffers submitted to the firmware. BUF_ATTR_DEQUEUED - buffers received from the firmware. BUF_ATTR_BUFFER_DONE - buffers sent back to vb2. Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345) Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-07media: iris: allocate, initialize and queue internal buffersDikshita Agarwal
Implement the functions for creating, queueing, releasing and destroying the buffers for internal usage. Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345) Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-07media: iris: subscribe parameters and properties to firmware for hfi_gen2Vedang Nagar
For hfi_gen2, subscribe different bitstream parameters on to firmware, to get notified of a change in any of the subscribed parameters. Signed-off-by: Vedang Nagar <quic_vnagar@quicinc.com> Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345) Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-07media: iris: implement set properties to firmware during streamonVedang Nagar
During the stream on operation, set some mandatory properties on the firmware to start a session. Set all v4l2 properties, which are set by the client, on to firmware, which is prepared with the dependency graph. Signed-off-by: Vedang Nagar <quic_vnagar@quicinc.com> Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345) Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-07media: iris: implement vb2 streaming opsDikshita Agarwal
During the stream on operation, send HFI_CMD_START on the capture and output planes to start processing on the respective planes. During the stream off operation, send HFI_CMD_STOP to the firmware, which is a synchronous command. After the response is received by the firmware, the session is closed on the firmware. Introduce different states for the instance and state transitions. IRIS_INST_INIT - video instance is opened. IRIS_INST_INPUT_STREAMING - stream on is completed on output plane. IRIS_INST_OUTPUT_STREAMING - stream on is completed on capture plane. IRIS_INST_STREAMING - stream on is completed on both output and capture planes. IRIS_INST_DEINIT - video instance is closed. IRIS_INST_ERROR - error state. | v ------------- +---------| INIT |--------- + | ------------- | | ^ ^ | | / \ | | / \ | | v v | | ----------- ----------- | | | INPUT OUTPUT | | |---| STREAMING STREAMING |---| | ----------- ----------- | | ^ ^ | | \ / | | \ / | | v v | | ------------- | |--------| STREAMING |-----------| | ------------- | | | | | | | | v | | ----------- | +-------->| DEINIT |<----------+ | ----------- | | | | | | | | v | | ---------- | +-------->| ERROR |<-----------+ ----------. Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345) Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-07media: iris: implement query_cap ioctlVedang Nagar
Implement the query_cap ioctl with the necessary hooks. Signed-off-by: Vedang Nagar <quic_vnagar@quicinc.com> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345) Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-07media: iris: implement iris v4l2_ctrl_opsDikshita Agarwal
Initialize the control handler by reading the platform specific firmware capabilities. Capabilities are features, which are supported by a specific platform (SOC). Each capability is defined with a min, max, range and default value and a corresponding HFI. Implement s_ctrl and g_volatile_ctrl ctrl ops. Co-developed-by: Vedang Nagar <quic_vnagar@quicinc.com> Signed-off-by: Vedang Nagar <quic_vnagar@quicinc.com> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345) Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-07media: iris: implement subscribe_event and unsubscribe_event ioctlsVedang Nagar
Implement the subscribe_event and unsubscribe_event iocts with the necessary hooks. Signed-off-by: Vedang Nagar <quic_vnagar@quicinc.com> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345) Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-07media: iris: implement enum_fmt and enum_framesizes ioctlsVedang Nagar
Implement the enum_fmt and enum_framesizes ioctls with the necessary hooks. Signed-off-by: Vedang Nagar <quic_vnagar@quicinc.com> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345) Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-07media: iris: implement g_selection ioctlVedang Nagar
Implement the g_selection ioctl op in the driver with the necessary hooks. Signed-off-by: Vedang Nagar <quic_vnagar@quicinc.com> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345) Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-07media: iris: implement s_fmt, g_fmt and try_fmt ioctlsVedang Nagar
Implement the s_fmt, g_fmt and try_fmt ioctl ops with the necessary hooks. Signed-off-by: Vedang Nagar <quic_vnagar@quicinc.com> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345) Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-07media: iris: implement reqbuf ioctl with vb2_queue_setupDikshita Agarwal
Implement the reqbuf IOCTL op and the vb2_queue_setup vb2 op in the driver with necessary hooks. Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345) Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-07media: iris: implement power managementDikshita Agarwal
Implement runtime power management for iris, including a platform specific power on/off sequence. Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345) Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-07media: iris: introduce host firmware interface with necessary hooksDikshita Agarwal
The Host firmware interface (HFI) is a well defined set of interfaces for the communication between the host driver and the firmware. The commands and responses are exchanged in form of packets. One or multiple packets are grouped under the packet header. Each packet has a packet type which describes the specific HFI and the payload, which holds the corresponding value for that HFI. Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345) Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-07media: iris: implement the boot sequence of the firmwareDikshita Agarwal
Set the memory region on the firmware and implement the boot sequence. Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345) Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-07media: iris: implement video firmware load/unloadDikshita Agarwal
Load/unload the firmware into/from memory via the MDT loader. The firmware is loaded as part of core initialization and unloaded as part of core de-initialization. Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345) Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-07media: iris: introduce iris core state management with shared queuesDikshita Agarwal
Introduce a core state management for iris driver with the necessary queues needed for the host firmware communication. There are 3 types of queues: Command queue - driver to write any command to firmware. Message queue - firmware to send any response to the driver. Debug queue - for the firmware to write debug messages. Initialize and configure the shared queues during probe. Different states for core: IRIS_CORE_DEINIT - default state. IRIS_CORE_INIT - core state with core initialized. FW loaded and HW brought out of reset, shared queues established between host driver and firmware. IRIS_CORE_ERROR - error state. ----------- | V ----------- | DEINIT | ----------- ^ / \ / \ / \ / \ v v ----------- ----------. | INIT |-->| ERROR | ----------- ----------. Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345) Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-07media: iris: implement iris v4l2 file opsDikshita Agarwal
Implement open, close and poll ops. Open: Configure the vb2 queue and v4l2 file handler. Allocate a video instance and add the instance to core instance list. Close: Free the instance and remove it from core instance list. Poll: Wait for an event on vb2 src and vb2 dst queues. Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345) Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-07media: iris: add platform driver for iris video deviceDikshita Agarwal
In preparation for adding H264 decode functionality, add the probe and remove functions and platform data to initialize iris resources, which are clocks, interconnects, power domains, reset clocks, and clock frequencies used for the iris hardware. Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345) Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-07dt-bindings: media: Add video support for QCOM SM8550 SoCDikshita Agarwal
Introduce support for Qualcomm new video acceleration hardware i.e. iris, used for video stream decoding and encoding on QCOM SM8550 SoC. Cc: devicetree@vger.kernel.org Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345) Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-06media: qcom: camss: Add support for VFE 780Depeng Shao
Add support for VFE found on SM8550 (Titan 780). This implementation is based on the titan 480 implementation. It supports the normal and lite VFE. Co-developed-by: Yongsheng Li <quic_yon@quicinc.com> Signed-off-by: Yongsheng Li <quic_yon@quicinc.com> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Depeng Shao <quic_depengs@quicinc.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-06media: qcom: camss: Add CSID 780 supportDepeng Shao
The CSID in sm8550 is version 780, it has new register offset and new functionality. The buf done irq, register update and reset are moved to CSID 780. Co-developed-by: Yongsheng Li <quic_yon@quicinc.com> Signed-off-by: Yongsheng Li <quic_yon@quicinc.com> Signed-off-by: Depeng Shao <quic_depengs@quicinc.com> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-06media: qcom: camss: csiphy-3ph: Add Gen2 v2.1.2 two-phase MIPI CSI-2 DPHY ↵Depeng Shao
support Add a PHY configuration sequence and PHY resource for the sm8550 which uses a Qualcomm Gen 2 version 2.1.2 CSI-2 PHY. The PHY can be configured as two phase or three phase in C-PHY or D-PHY mode. This configuration supports two-phase D-PHY mode. Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Depeng Shao <quic_depengs@quicinc.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-06media: qcom: camss: Add sm8550 compatibleDepeng Shao
Add CAMSS_8550 enum, sm8550 compatible and sm8550 camss drvier private data, the private data just include some basic information now, later changes will enumerate with csiphy, csid and vfe resources. Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Depeng Shao <quic_depengs@quicinc.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-06dt-bindings: media: camss: Add qcom,sm8550-camss bindingDepeng Shao
Add bindings for qcom,sm8550-camss in order to support the camera subsystem for sm8550. Co-developed-by: Yongsheng Li <quic_yon@quicinc.com> Signed-off-by: Yongsheng Li <quic_yon@quicinc.com> Signed-off-by: Depeng Shao <quic_depengs@quicinc.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-06media: qcom: camss: csid: Only add TPG v4l2 ctrl if TPG hardware is availableDepeng Shao
There is no CSID TPG on some SoCs, so the v4l2 ctrl in CSID driver shouldn't be registered. Checking the supported TPG modes to indicate if the TPG hardware exists or not and only registering v4l2 ctrl for CSID only when the TPG hardware is present. Signed-off-by: Depeng Shao <quic_depengs@quicinc.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-06media: qcom: camss: Add default case in vfe_src_pad_codeDepeng Shao
Add a default case in vfe_src_pad_code to get rid of a compile warning if a new hw enum is added. Signed-off-by: Depeng Shao <quic_depengs@quicinc.com> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-06media: qcom: camss: Add callback API for RUP update and buf doneDepeng Shao
The RUP registers and buf done irq are moved from the IFE to CSID register block on recent CAMSS implementations. Add callbacks structure to wrapper the location change with minimum logic disruption. Co-developed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Depeng Shao <quic_depengs@quicinc.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-06media: qcom: camss: vfe: Move common code into vfe coreDepeng Shao
Some v4l2 buffer related logic functions can be moved to vfe core as common code, then the vfe driver of different hw version can reuse them, this also can avoid adding duplicate code for new version supporting. Suggested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Depeng Shao <quic_depengs@quicinc.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-06media: qcom: camss: csid: Move common code into csid coreDepeng Shao
The get hw version and src pad code functions can be common code in csid core file, then the csid driver of different hw version can reuse them, rather than adding duplicate code in csid driver for each version. Suggested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Depeng Shao <quic_depengs@quicinc.com> Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-06media: qcom: camss: csiphy-3ph: Use an offset variable to find common ↵Bryan O'Donoghue
control regs New versions of the CSIPHY locate the control registers at offset 0x1000 not offset 0x800. Provide a variable to base an offset from for the purposes of redirecting the base offset for the new PHY regs layout. The existing setup bases from 0x800, the new from 0x1000 with some of the 'EXT' registers dropped but the lower-order lane config regs at offset 0x00 and up the same as before. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Depeng Shao <quic_depengs@quicinc.com> Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-06media: qcom: camss: csiphy-3ph: Move CSIPHY variables to data field inside ↵Bryan O'Donoghue
csiphy struct A .data field in the csiphy device structure allows us to extend out the register layout of the three phase capable CSIPHY layer. Move the existing lane configuration structure to an encapsulating structure -> struct csiphy_device_regs which is derived from the .data field populated at PHY init time, as opposed to calculated at lane configuration. Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Depeng Shao <quic_depengs@quicinc.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-06media: qcom: camss: csiphy: Add an init callback to CSI PHY devicesBryan O'Donoghue
Add a nop init callback to CSIPHY devices, this callback is used to add some HW register offset and register configuration for specific platform, then different platform can reuse the same CSIPHY driver. Later changes will enumerate with enabling code. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Depeng Shao <quic_depengs@quicinc.com> Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-06media: qcom: camss: csiphy-3ph: Rename structBryan O'Donoghue
The existing structure captures the configuration of CSIPHY lane registers. Rename to struct csiphy_lane_regs to reflect. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Depeng Shao <quic_depengs@quicinc.com> Reviewed-by: Elliot Berman <quic_eberman@quicinc.com> Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-06media: qcom: camss: csiphy-3ph: Remove redundant PHY init sequence control loopBryan O'Donoghue
Adding a new CSIPHY init sequence using downstream as a reference prompted me to look at why we are splitting up the init sequence into chunks. Right now we declare CSI PHY init sequences as an array of five equally sized writes with a hard-coded control loop to iterate through each of the five indexes. One bug in this model is that if you don't have an even number of writes, you can't init the PHY as you wish. In downstream the original code has something of the character phy_init_seq[MAX_LANES][MAX_PARAMS] which in upstream we have translated into phy_init_seq[5][SOME_NUMBER_OF_EQUAL_WRITES]; What the code does is take a pointer to the first index of the r = &phy_init_seq[0][0]; and then literally does write(r, value); r++; The controlling loop that hard-codes '5' in-lieu of MAX_LANES does no special sleep, fabric-coherence sync or even a printk() to justify its existence. Our compilers are optimising all of this away anyway so lets drop. Reduce the array declaration down to one flat aggregate init and let the code just step through. As a happy side-effect we can then also handle odd-number writes as the number of elements in the init sequence will no longer have to be evenly divisible. Reviewed-by: Elliot Berman <quic_eberman@quicinc.com> Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Depeng Shao <quic_depengs@quicinc.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-06media: qcom: camss: csiphy-3ph: Fix trivial indentation fault in definesBryan O'Donoghue
Replace space with tab in define indentations. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Depeng Shao <quic_depengs@quicinc.com> Reviewed-by: Elliot Berman <quic_eberman@quicinc.com> Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-06media: qcom: camss: update clock names for sc7280Vikram Sharma
Update clock names to make them consistent with existing platform i.e sc8280xp. Rename gcc_cam_hf_axi to gcc_axi_hf and add gcc_axi_sf. Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-06media: dt-bindings: update clocks for sc7280-camssVikram Sharma
Update clock names to make them consistent with existing platform i.e qcom,sc8280xp-camss.yaml. Rename gcc_cam_hf_axi to gcc_axi_hf and add gcc_axi_sf. gcc_camera_ahb is always on and we don't need to enable it explicitly. gcc_axi_sf is added to avoid unexpected hardware behaviour. This change will not break ABI because the ABI hasn't been cemented yet as the dtsi changes are not merged yet and there are no users for this driver as of now. Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-02-02Linux 6.14-rc1v6.14-rc1Linus Torvalds
2025-02-02Merge tag 'turbostat-2025.02.02' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull turbostat updates from Len Brown: - Fix regression that affinitized forked child in one-shot mode. - Harden one-shot mode against hotplug online/offline - Enable RAPL SysWatt column by default - Add initial PTL, CWF platform support - Harden initial PMT code in response to early use - Enable first built-in PMT counter: CWF c1e residency - Refuse to run on unsupported platforms without --force, to encourage updating to a version that supports the system, and to avoid no-so-useful measurement results * tag 'turbostat-2025.02.02' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (25 commits) tools/power turbostat: version 2025.02.02 tools/power turbostat: Add CPU%c1e BIC for CWF tools/power turbostat: Harden one-shot mode against cpu offline tools/power turbostat: Fix forked child affinity regression tools/power turbostat: Add tcore clock PMT type tools/power turbostat: version 2025.01.14 tools/power turbostat: Allow adding PMT counters directly by sysfs path tools/power turbostat: Allow mapping multiple PMT files with the same GUID tools/power turbostat: Add PMT directory iterator helper tools/power turbostat: Extend PMT identification with a sequence number tools/power turbostat: Return default value for unmapped PMT domains tools/power turbostat: Check for non-zero value when MSR probing tools/power turbostat: Enhance turbostat self-performance visibility tools/power turbostat: Add fixed RAPL PSYS divisor for SPR tools/power turbostat: Fix PMT mmaped file size rounding tools/power turbostat: Remove SysWatt from DISABLED_BY_DEFAULT tools/power turbostat: Add an NMI column tools/power turbostat: add Busy% to "show idle" tools/power turbostat: Introduce --force parameter tools/power turbostat: Improve --help output ...
2025-02-02Merge tag 'sh-for-v6.14-tag1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux Pull sh updates from John Paul Adrian Glaubitz: "Fixes and improvements for sh: - replace seq_printf() with the more efficient seq_put_decimal_ull_width() to increase performance when stress reading /proc/interrupts (David Wang) - migrate sh to the generic rule for built-in DTB to help avoid race conditions during parallel builds which can occur because Kbuild decends into arch/*/boot/dts twice (Masahiro Yamada) - replace select with imply in the board Kconfig for enabling hardware with complex dependencies. This addresses warnings which were reported by the kernel test robot (Geert Uytterhoeven)" * tag 'sh-for-v6.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux: sh: boards: Use imply to enable hardware with complex dependencies sh: Migrate to the generic rule for built-in DTB sh: irq: Use seq_put_decimal_ull_width() for decimal values
2025-02-02tools/power turbostat: version 2025.02.02Len Brown
Summary of Changes since 2024.11.30: Fix regression in 2023.11.07 that affinitized forked child in one-shot mode. Harden one-shot mode against hotplug online/offline Enable RAPL SysWatt column by default. Add initial PTL, CWF platform support. Harden initial PMT code in response to early use. Enable first built-in PMT counter: CWF c1e residency Refuse to run on unsupported platforms without --force, to encourage updating to a version that supports the system, and to avoid no-so-useful measurement results. Signed-off-by: Len Brown <len.brown@intel.com>
2025-02-01Merge tag 'pull-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds
Pull misc vfs cleanups from Al Viro: "Two unrelated patches - one is a removal of long-obsolete include in overlayfs (it used to need fs/internal.h, but the extern it wanted has been moved back to include/linux/namei.h) and another introduces convenience helper constructing struct qstr by a NUL-terminated string" * tag 'pull-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: add a string-to-qstr constructor fs/overlayfs/namei.c: get rid of include ../internal.h
2025-02-01Merge tag 'mips_6.14_1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fix from Thomas Bogendoerfer: "Revert commit breaking sysv ipc for o32 ABI" * tag 'mips_6.14_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: Revert "mips: fix shmctl/semctl/msgctl syscall for o32"
2025-02-01Merge tag 'v6.14-rc-smb3-client-fixes-part2' of ↵Linus Torvalds
git://git.samba.org/sfrench/cifs-2.6 Pull more smb client updates from Steve French: - various updates for special file handling: symlink handling, support for creating sockets, cleanups, new mount options (e.g. to allow disabling using reparse points for them, and to allow overriding the way symlinks are saved), and fixes to error paths - fix for kerberos mounts (allow IAKerb) - SMB1 fix for stat and for setting SACL (auditing) - fix an incorrect error code mapping - cleanups" * tag 'v6.14-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: (21 commits) cifs: Fix parsing native symlinks directory/file type cifs: update internal version number cifs: Add support for creating WSL-style symlinks smb3: add support for IAKerb cifs: Fix struct FILE_ALL_INFO cifs: Add support for creating NFS-style symlinks cifs: Add support for creating native Windows sockets cifs: Add mount option -o reparse=none cifs: Add mount option -o symlink= for choosing symlink create type cifs: Fix creating and resolving absolute NT-style symlinks cifs: Simplify reparse point check in cifs_query_path_info() function cifs: Remove symlink member from cifs_open_info_data union cifs: Update description about ACL permissions cifs: Rename struct reparse_posix_data to reparse_nfs_data_buffer and move to common/smb2pdu.h cifs: Remove struct reparse_posix_data from struct cifs_open_info_data cifs: Remove unicode parameter from parse_reparse_point() function cifs: Fix getting and setting SACLs over SMB1 cifs: Remove intermediate object of failed create SFU call cifs: Validate EAs for WSL reparse points cifs: Change translation of STATUS_PRIVILEGE_NOT_HELD to -EPERM ...
2025-02-01Merge tag 'driver-core-6.14-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull debugfs fix from Greg KH: "Here is a single debugfs fix from Al to resolve a reported regression in the driver-core tree. It has been reported to fix the issue" * tag 'driver-core-6.14-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: debugfs: Fix the missing initializations in __debugfs_file_get()
2025-02-01Merge tag 'mm-hotfixes-stable-2025-02-01-03-56' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "21 hotfixes. 8 are cc:stable and the remainder address post-6.13 issues. 13 are for MM and 8 are for non-MM. All are singletons, please see the changelogs for details" * tag 'mm-hotfixes-stable-2025-02-01-03-56' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (21 commits) MAINTAINERS: include linux-mm for xarray maintenance revert "xarray: port tests to kunit" MAINTAINERS: add lib/test_xarray.c mailmap, MAINTAINERS, docs: update Carlos's email address mm/hugetlb: fix hugepage allocation for interleaved memory nodes mm: gup: fix infinite loop within __get_longterm_locked mm, swap: fix reclaim offset calculation error during allocation .mailmap: update email address for Christopher Obbard kfence: skip __GFP_THISNODE allocations on NUMA systems nilfs2: fix possible int overflows in nilfs_fiemap() mm: compaction: use the proper flag to determine watermarks kernel: be more careful about dup_mmap() failures and uprobe registering mm/fake-numa: handle cases with no SRAT info mm: kmemleak: fix upper boundary check for physical address objects mailmap: add an entry for Hamza Mahfooz MAINTAINERS: mailmap: update Yosry Ahmed's email address scripts/gdb: fix aarch64 userspace detection in get_current_task mm/vmscan: accumulate nr_demoted for accurate demotion statistics ocfs2: fix incorrect CPU endianness conversion causing mount failure mm/zsmalloc: add __maybe_unused attribute for is_first_zpdesc() ...
2025-02-01Merge tag 'media/v6.14-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fix from Mauro Carvalho Chehab: "A revert for a regression in the uvcvideo driver" * tag 'media/v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: Revert "media: uvcvideo: Require entities to have a non-zero unique ID"
2025-02-01MAINTAINERS: include linux-mm for xarray maintenanceAndrew Morton
MM developers have an interest in the xarray code. Cc: David Gow <davidgow@google.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com> Cc: Tamir Duberstein <tamird@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
generated by cgit (git 2.34.1) at 2025-09-11 22:32:19 +0000