| Age | Commit message (Collapse) | Author |
|---|
|
If tcp_bpf_sendmsg() is running while sk msg is full. When sk_msg_alloc()
returns -ENOMEM error, tcp_bpf_sendmsg() goes to wait_for_memory. If partial
memory has been alloced by sk_msg_alloc(), that is, msg_tx->sg.size is
greater than osize after sk_msg_alloc(), memleak occurs. To fix we use
sk_msg_trim() to release the allocated memory, then goto wait for memory.
Other call paths of sk_msg_alloc() have the similar issue, such as
tls_sw_sendmsg(), so handle sk_msg_trim logic inside sk_msg_alloc(),
as Cong Wang suggested.
This issue can cause the following info:
WARNING: CPU: 3 PID: 7950 at net/core/stream.c:208 sk_stream_kill_queues+0xd4/0x1a0
Call Trace:
<TASK>
inet_csk_destroy_sock+0x55/0x110
__tcp_close+0x279/0x470
tcp_close+0x1f/0x60
inet_release+0x3f/0x80
__sock_release+0x3d/0xb0
sock_close+0x11/0x20
__fput+0x92/0x250
task_work_run+0x6a/0xa0
do_exit+0x33b/0xb60
do_group_exit+0x2f/0xa0
get_signal+0xb6/0x950
arch_do_signal_or_restart+0xac/0x2a0
exit_to_user_mode_prepare+0xa9/0x200
syscall_exit_to_user_mode+0x12/0x30
do_syscall_64+0x46/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
</TASK>
WARNING: CPU: 3 PID: 2094 at net/ipv4/af_inet.c:155 inet_sock_destruct+0x13c/0x260
Call Trace:
<TASK>
__sk_destruct+0x24/0x1f0
sk_psock_destroy+0x19b/0x1c0
process_one_work+0x1b3/0x3c0
kthread+0xe6/0x110
ret_from_fork+0x22/0x30
</TASK>
Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20220304081145.2037182-3-wangyufen@huawei.com
|
|
If tcp_bpf_sendmsg is running during a tear down operation we may enqueue
data on the ingress msg queue while tear down is trying to free it.
sk1 (redirect sk2) sk2
------------------- ---------------
tcp_bpf_sendmsg()
tcp_bpf_send_verdict()
tcp_bpf_sendmsg_redir()
bpf_tcp_ingress()
sock_map_close()
lock_sock()
lock_sock() ... blocking
sk_psock_stop
sk_psock_clear_state(psock, SK_PSOCK_TX_ENABLED);
release_sock(sk);
lock_sock()
sk_mem_charge()
get_page()
sk_psock_queue_msg()
sk_psock_test_state(psock, SK_PSOCK_TX_ENABLED);
drop_sk_msg()
release_sock()
While drop_sk_msg(), the msg has charged memory form sk by sk_mem_charge
and has sg pages need to put. To fix we use sk_msg_free() and then kfee()
msg.
This issue can cause the following info:
WARNING: CPU: 0 PID: 9202 at net/core/stream.c:205 sk_stream_kill_queues+0xc8/0xe0
Call Trace:
<IRQ>
inet_csk_destroy_sock+0x55/0x110
tcp_rcv_state_process+0xe5f/0xe90
? sk_filter_trim_cap+0x10d/0x230
? tcp_v4_do_rcv+0x161/0x250
tcp_v4_do_rcv+0x161/0x250
tcp_v4_rcv+0xc3a/0xce0
ip_protocol_deliver_rcu+0x3d/0x230
ip_local_deliver_finish+0x54/0x60
ip_local_deliver+0xfd/0x110
? ip_protocol_deliver_rcu+0x230/0x230
ip_rcv+0xd6/0x100
? ip_local_deliver+0x110/0x110
__netif_receive_skb_one_core+0x85/0xa0
process_backlog+0xa4/0x160
__napi_poll+0x29/0x1b0
net_rx_action+0x287/0x300
__do_softirq+0xff/0x2fc
do_softirq+0x79/0x90
</IRQ>
WARNING: CPU: 0 PID: 531 at net/ipv4/af_inet.c:154 inet_sock_destruct+0x175/0x1b0
Call Trace:
<TASK>
__sk_destruct+0x24/0x1f0
sk_psock_destroy+0x19b/0x1c0
process_one_work+0x1b3/0x3c0
? process_one_work+0x3c0/0x3c0
worker_thread+0x30/0x350
? process_one_work+0x3c0/0x3c0
kthread+0xe6/0x110
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x22/0x30
</TASK>
Fixes: 9635720b7c88 ("bpf, sockmap: Fix memleak on ingress msg enqueue")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20220304081145.2037182-2-wangyufen@huawei.com
|
|
The WARN_ON() macro takes a condition, not a warning message.
Fixes: 0933bd04047c ("net: sparx5: Add support for ptp clocks")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220314140327.GB30883@kili
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This reverts the omap2430 changes of
commit cf081d009c44 ("usb: musb: Set the DT node on the child device")
Since v5.17-rc1, musb is broken on the gta04 and openpandora devices
(omap3530/dm3730). BeagleBone Black (am335x) seems to work.
Symptoms of this bug are
a) main symptom
[ 21.336517] using random host ethernet address
[ 21.341430] using host ethernet address: 32:70:05:18:ff:78
[ 21.341461] using self ethernet address: 46:10:3a:b3:af:d9
[ 21.358184] usb0: HOST MAC 32:70:05:18:ff:78
[ 21.376678] usb0: MAC 46:10:3a:b3:af:d9
[ 21.388305] using random self ethernet address
[ 21.393371] using random host ethernet address
[ 21.398162] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
[ 21.421081] g_ether gadget: g_ether ready
[ 21.492156] musb-hdrc musb-hdrc.1.auto: Could not enable: -22
[ 21.691345] musb-hdrc musb-hdrc.1.auto: Could not enable: -22
[ 21.803192] musb-hdrc musb-hdrc.1.auto: Could not enable: -22
[ 21.819427] musb-hdrc musb-hdrc.1.auto: Could not enable: -22
[ 22.124450] musb-hdrc musb-hdrc.1.auto: Could not enable: -22
[ 22.168518] musb-hdrc musb-hdrc.1.auto: Could not enable: -22
[ 22.179382] musb-hdrc musb-hdrc.1.auto: Could not enable: -22
[ 23.213592] musb-hdrc musb-hdrc.1.auto: pm runtime get failed in musb_gadget_queue
[ 23.221832] musb-hdrc musb-hdrc.1.auto: Could not enable: -22
[ 23.227905] musb-hdrc musb-hdrc.1.auto: Could not enable: -22
[ 23.239440] musb-hdrc musb-hdrc.1.auto: Could not enable: -22
[ 23.401000] musb-hdrc musb-hdrc.1.auto: Could not enable: -22
[ 23.407073] musb-hdrc musb-hdrc.1.auto: Could not enable: -22
[ 23.426361] musb-hdrc musb-hdrc.1.auto: Could not enable: -22
[ 23.734466] musb-hdrc musb-hdrc.1.auto: pm runtime get failed in musb_gadget_queue
[ 23.742462] musb-hdrc musb-hdrc.1.auto: pm runtime get failed in musb_gadget_queue
[ 23.750396] musb-hdrc musb-hdrc.1.auto: pm runtime get failed in musb_gadget_queue
... (repeats with high frequency)
This stops if the USB cable is unplugged and restarts if it is plugged in again.
b) also found in the log
[ 6.498107] ------------[ cut here ]------------
[ 6.502960] WARNING: CPU: 0 PID: 868 at arch/arm/mach-omap2/omap_hwmod.c:1885 _enable+0x50/0x234
[ 6.512207] omap_hwmod: usb_otg_hs: enabled state can only be entered from initialized, idle, or disabled state
[ 6.522766] Modules linked in: omap2430(+) bmp280_i2c bmp280 itg3200 at24 tsc2007 leds_tca6507 bma180 hmc5843_i2c hmc5843_core industrialio_triggered_buffer lis3lv02d_i2c kfifo_buf lis3lv02d phy_twl4030_usb snd_soc_omap_mcbsp snd_soc_ti_sdma musb_hdrc snd_soc_twl4030 gnss_sirf twl4030_vibra twl4030_madc twl4030_charger twl4030_pwrbutton gnss industrialio ehci_omap omapdrm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm drm_panel_orientation_quirks cec
[ 6.566436] CPU: 0 PID: 868 Comm: udevd Not tainted 5.16.0-rc5-letux+ #8251
[ 6.573730] Hardware name: Generic OMAP36xx (Flattened Device Tree)
[ 6.580322] [<c010ed30>] (unwind_backtrace) from [<c010a1d0>] (show_stack+0x10/0x14)
[ 6.588470] [<c010a1d0>] (show_stack) from [<c0897c14>] (dump_stack_lvl+0x40/0x4c)
[ 6.596405] [<c0897c14>] (dump_stack_lvl) from [<c0130cc4>] (__warn+0xb4/0xdc)
[ 6.604003] [<c0130cc4>] (__warn) from [<c0130d5c>] (warn_slowpath_fmt+0x70/0x9c)
[ 6.611846] [<c0130d5c>] (warn_slowpath_fmt) from [<c011f4d4>] (_enable+0x50/0x234)
[ 6.619903] [<c011f4d4>] (_enable) from [<c012081c>] (omap_hwmod_enable+0x28/0x40)
[ 6.627838] [<c012081c>] (omap_hwmod_enable) from [<c0120ff4>] (omap_device_enable+0x4c/0x78)
[ 6.636779] [<c0120ff4>] (omap_device_enable) from [<c0121030>] (_od_runtime_resume+0x10/0x3c)
[ 6.645812] [<c0121030>] (_od_runtime_resume) from [<c05c688c>] (__rpm_callback+0x3c/0xf4)
[ 6.654510] [<c05c688c>] (__rpm_callback) from [<c05c6994>] (rpm_callback+0x50/0x54)
[ 6.662628] [<c05c6994>] (rpm_callback) from [<c05c66b0>] (rpm_resume+0x448/0x4e4)
[ 6.670593] [<c05c66b0>] (rpm_resume) from [<c05c6784>] (__pm_runtime_resume+0x38/0x50)
[ 6.678985] [<c05c6784>] (__pm_runtime_resume) from [<bf14ab20>] (musb_init_controller+0x350/0xa5c [musb_hdrc])
[ 6.689727] [<bf14ab20>] (musb_init_controller [musb_hdrc]) from [<c05bccb8>] (platform_probe+0x58/0xa8)
[ 6.699737] [<c05bccb8>] (platform_probe) from [<c05badf0>] (really_probe+0x170/0x2fc)
[ 6.708068] [<c05badf0>] (really_probe) from [<c05bb040>] (__driver_probe_device+0xc4/0xd8)
[ 6.716827] [<c05bb040>] (__driver_probe_device) from [<c05bb084>] (driver_probe_device+0x30/0xac)
[ 6.726226] [<c05bb084>] (driver_probe_device) from [<c05bb3d0>] (__device_attach_driver+0x94/0xb4)
[ 6.735717] [<c05bb3d0>] (__device_attach_driver) from [<c05b93f8>] (bus_for_each_drv+0xa0/0xb4)
[ 6.744934] [<c05b93f8>] (bus_for_each_drv) from [<c05bb248>] (__device_attach+0xc0/0x134)
[ 6.753631] [<c05bb248>] (__device_attach) from [<c05b9fcc>] (bus_probe_device+0x28/0x80)
[ 6.762207] [<c05b9fcc>] (bus_probe_device) from [<c05b7e40>] (device_add+0x5fc/0x788)
[ 6.770507] [<c05b7e40>] (device_add) from [<c05bd240>] (platform_device_add+0x70/0x1bc)
[ 6.779022] [<c05bd240>] (platform_device_add) from [<bf177830>] (omap2430_probe+0x260/0x2d4 [omap2430])
[ 6.789001] [<bf177830>] (omap2430_probe [omap2430]) from [<c05bccb8>] (platform_probe+0x58/0xa8)
[ 6.798309] [<c05bccb8>] (platform_probe) from [<c05badf0>] (really_probe+0x170/0x2fc)
[ 6.806610] [<c05badf0>] (really_probe) from [<c05bb040>] (__driver_probe_device+0xc4/0xd8)
[ 6.815399] [<c05bb040>] (__driver_probe_device) from [<c05bb084>] (driver_probe_device+0x30/0xac)
[ 6.824798] [<c05bb084>] (driver_probe_device) from [<c05bb4b4>] (__driver_attach+0xc4/0xd8)
[ 6.833648] [<c05bb4b4>] (__driver_attach) from [<c05b9308>] (bus_for_each_dev+0x64/0xa0)
[ 6.842224] [<c05b9308>] (bus_for_each_dev) from [<c05ba248>] (bus_add_driver+0x148/0x1a4)
[ 6.850891] [<c05ba248>] (bus_add_driver) from [<c05bbd1c>] (driver_register+0xb4/0xf8)
[ 6.859313] [<c05bbd1c>] (driver_register) from [<c0101f54>] (do_one_initcall+0x90/0x1c8)
[ 6.867889] [<c0101f54>] (do_one_initcall) from [<c0893968>] (do_init_module+0x4c/0x204)
[ 6.876373] [<c0893968>] (do_init_module) from [<c01b4c30>] (load_module+0x13f0/0x1928)
[ 6.884796] [<c01b4c30>] (load_module) from [<c01b53a0>] (sys_finit_module+0xa0/0xc0)
[ 6.893005] [<c01b53a0>] (sys_finit_module) from [<c0100080>] (ret_fast_syscall+0x0/0x54)
[ 6.901580] Exception stack(0xc2807fa8 to 0xc2807ff0)
[ 6.906890] 7fa0: b6e517d4 00052068 00000006 b6e509f8 00000000 b6e5131c
[ 6.915466] 7fc0: b6e517d4 00052068 cd718000 0000017b 00020000 00037f78 00050048 00063368
[ 6.924011] 7fe0: bed8fef0 bed8fee0 b6e4ac4b b6f55a42
[ 6.929321] ---[ end trace d715ff121b58763c ]---
c) git bisect result on testing for "musb-hdrc" in the console log:
cf081d009c447647c6b36aced535ca427dbebe72 is the first bad commit
commit cf081d009c447647c6b36aced535ca427dbebe72
Author: Rob Herring <robh@kernel.org>
Date: Wed Dec 15 17:07:57 2021 -0600
usb: musb: Set the DT node on the child device
The musb glue drivers just copy the glue resources to the musb child device.
Instead, set the musb child device's DT node pointer to the parent device's
node so that platform_get_irq_byname() can find the resources in the DT.
This removes the need for statically populating the IRQ resources from the
DT which has been deprecated for some time.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211215230756.2009115-3-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/usb/musb/am35x.c | 2 ++
drivers/usb/musb/da8xx.c | 2 ++
drivers/usb/musb/jz4740.c | 1 +
drivers/usb/musb/mediatek.c | 2 ++
drivers/usb/musb/omap2430.c | 1 +
drivers/usb/musb/ux500.c | 1 +
6 files changed, 9 insertions(+)
Reverting this patch makes musb work again as before.
Fixes: cf081d009c44 ("usb: musb: Set the DT node on the child device")
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Link: https://lore.kernel.org/r/f62f5fc11f9ecae7e57f3fd66939e051bd3b11fc.1646744166.git.hns@goldelico.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If "BufOffset" is very large the "BufOffset + 8" operation can have an
integer overflow.
Cc: stable@kernel.org
Fixes: 38ea1eac7d88 ("usb: gadget: rndis: check size of RNDIS_MSG_SET command")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220301080424.GA17208@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add the PCI device ID and update the dwc3_pci_id_table
for Intel Alder Lake SoC.
The DWC3 controllor in the CPU block handles the USB3 traffic
and the device ID is common across the Alder Lake platforms.
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Shruthi Sanil <shruthi.sanil@intel.com>
Link: https://lore.kernel.org/r/20220308170848.30722-1-shruthi.sanil@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Usually, the vbus_regulator (smps10 on omap5evm) boots up disabled.
Hence calling regulator_disable() indirectly through dwc3_omap_set_mailbox()
during probe leads to:
[ 10.332764] WARNING: CPU: 0 PID: 1628 at drivers/regulator/core.c:2853 _regulator_disable+0x40/0x164
[ 10.351919] unbalanced disables for smps10_out1
[ 10.361298] Modules linked in: dwc3_omap(+) clk_twl6040 at24 gpio_twl6040 palmas_gpadc palmas_pwrbutton
industrialio snd_soc_omap_mcbsp(+) snd_soc_ti_sdma display_connector ti_tpd12s015 drm leds_gpio
drm_panel_orientation_quirks ip_tables x_tables ipv6 autofs4
[ 10.387818] CPU: 0 PID: 1628 Comm: systemd-udevd Not tainted 5.17.0-rc1-letux-lpae+ #8139
[ 10.405129] Hardware name: Generic OMAP5 (Flattened Device Tree)
[ 10.411455] unwind_backtrace from show_stack+0x10/0x14
[ 10.416970] show_stack from dump_stack_lvl+0x40/0x4c
[ 10.422313] dump_stack_lvl from __warn+0xb8/0x170
[ 10.427377] __warn from warn_slowpath_fmt+0x70/0x9c
[ 10.432595] warn_slowpath_fmt from _regulator_disable+0x40/0x164
[ 10.439037] _regulator_disable from regulator_disable+0x30/0x64
[ 10.445382] regulator_disable from dwc3_omap_set_mailbox+0x8c/0xf0 [dwc3_omap]
[ 10.453116] dwc3_omap_set_mailbox [dwc3_omap] from dwc3_omap_probe+0x2b8/0x394 [dwc3_omap]
[ 10.467021] dwc3_omap_probe [dwc3_omap] from platform_probe+0x58/0xa8
[ 10.481762] platform_probe from really_probe+0x168/0x2fc
[ 10.481782] really_probe from __driver_probe_device+0xc4/0xd8
[ 10.481782] __driver_probe_device from driver_probe_device+0x24/0xa4
[ 10.503762] driver_probe_device from __driver_attach+0xc4/0xd8
[ 10.510018] __driver_attach from bus_for_each_dev+0x64/0xa0
[ 10.516001] bus_for_each_dev from bus_add_driver+0x148/0x1a4
[ 10.524880] bus_add_driver from driver_register+0xb4/0xf8
[ 10.530678] driver_register from do_one_initcall+0x90/0x1c4
[ 10.536661] do_one_initcall from do_init_module+0x4c/0x200
[ 10.536683] do_init_module from load_module+0x13dc/0x1910
[ 10.551159] load_module from sys_finit_module+0xc8/0xd8
[ 10.561319] sys_finit_module from __sys_trace_return+0x0/0x18
[ 10.561336] Exception stack(0xc344bfa8 to 0xc344bff0)
[ 10.561341] bfa0: b6fb5778 b6fab8d8 00000007 b6ecfbb8 00000000 b6ed0398
[ 10.561341] bfc0: b6fb5778 b6fab8d8 855c0500 0000017b 00020000 b6f9a3cc 00000000 b6fb5778
[ 10.595500] bfe0: bede18f8 bede18e8 b6ec9aeb b6dda1c2
[ 10.601345] ---[ end trace 0000000000000000 ]---
Fix this unnecessary warning by checking if the regulator is enabled.
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Link: https://lore.kernel.org/r/af3b750dc2265d875deaabcf5f80098c9645da45.1646744616.git.hns@goldelico.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently the driver will schedule isoc transfers immediately on the
next interval, which is quite aggressive when the interval is 125us.
There's report that some platforms may need more time to process the
transfer, otherwise the controller may miss the first interval. Let's
keep it simple and give the controller at least 500us to schedule the
isoc transfer.
Link: https://lore.kernel.org/linux-usb/20220302143539.GI11577@pengutronix.de/
Tested-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/deb8146b8e1f7f8495ef2d5647017270934cb2d8.1646708142.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In the 3.0 device core, if the core is programmed to operate in
2.0 only, then setting the GUCTL1.DEV_FORCE_20_CLK_FOR_30_CLK makes
the internal 2.0(utmi/ulpi) clock to be routed as the 3.0 (pipe)
clock. Enabling this feature allows the pipe3 clock to be not-running
when forcibly operating in 2.0 device mode.
Tested-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Bin Yang <yangbin@rock-chips.com>
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Link: https://lore.kernel.org/r/20220228135700.1089526-6-pgwipeout@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add the compatible for the Rockchip RK3568 variant.
Tested-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Link: https://lore.kernel.org/r/20220228135700.1089526-4-pgwipeout@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The USB3 glue layer has 2 areas in the register set, see RM Rev.1
section 11.2.5.2.1 GLUE_usb3 memory map:
* USB3 control/status
* PHY control/status
Provide the memory area to the usb3 nodes for accessing the features
in the USB3 control area.
Reviewed-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20220218152707.2198357-5-alexander.stein@ew.tq-group.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The i.MX8MP glue layer has support for the following flags:
* over-current polarity
* PWR pad polarity
* controlling PPC flag in HCCPARAMS register
* permanent port attach for usb2 & usb3 port
Allow setting these flags by supporting specific flags in the glue node.
In order to get this to work an additional IORESOURCE_MEM and clock is
necessary. For backward compatibility this is purely optional.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20220218152707.2198357-4-alexander.stein@ew.tq-group.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This adds bindings for features in the USB glue block. They allow
setting polarity of PWR and OC as well as disabling port power control.
Also permanently attached can be annotated as well.
Additional IO address and clock are needed.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20220218152707.2198357-3-alexander.stein@ew.tq-group.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Until now the iomem used is not USB glue as the name suggests, but
HSIO BLK_CTL. Rename the struct member accordingly. This is a preparing
patch for when USB glue is actually used.
Reviewed-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20220218152707.2198357-2-alexander.stein@ew.tq-group.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit a0c68e493007a8c72b6b00f6ac95590a86edc937.
Revert all the changes to add the Embedded USB Debugger(EUD) Node
in the device tree, the connector node and also changes to usb2 Node
associated with this.The changes need to be reverted as DT changes
for QCOM should go through the QCOM tree and not the USB tree.
Signed-off-by: Souradeep Chowdhury <quic_schowdhu@quicinc.com>
Link: https://lore.kernel.org/r/8c863e7e76003511dff36383b518ab66d2dd6552.1645793187.git.quic_schowdhu@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit c18553956f34819e224a79c9890eba2ba0604e15.
Revert the change to set dr_mode for usb2 in case of
Embedded USB Debugger(EUD). This change needs to be
reverted as the DT changes for QCOM should go through
the QCOM tree and not the USB tree.
Signed-off-by: Souradeep Chowdhury <quic_schowdhu@quicinc.com>
Link: https://lore.kernel.org/r/87008876afb33d8e1b7fd78d2fd5b6d9ec343d7d.1645793187.git.quic_schowdhu@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Constify the drvdata structs. This also matches the definition of
member drvdata in dwc3_meson_g12a.
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/a3c178c9-7c33-d7b8-9f6e-734dc28728ab@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If we try to use raw_ioctl_ep_enable() for ep5in on a hardware that
only support from ep1-ep4 for both in and out direction, it will return
-EBUSY originally.
I think it will be more intuitive if we return -EINVAL, because -EBUSY
sounds like ep5in is not available now, but might be available in the
future.
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Signed-off-by: Wei Ming Chen <jj251510319013@gmail.com>
Link: https://lore.kernel.org/r/20220311082944.4881-1-jj251510319013@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The usb-device.yaml reference is absolute so it should use /schemas part
in path.
Fixes: 23bf6fc7046c ("dt-bindings: usb: convert usb-device.txt to YAML schema")
Cc: <stable@vger.kernel.org>
Reported-by: Rob Herring <robh@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20220314181830.245853-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use kzalloc instead of kmalloc + memset.
The semantic patch that makes this change is:
(https://coccinelle.gitlabpages.inria.fr/website/)
//<smpl>
@@
expression res, size, flag;
@@
- res = kmalloc(size, flag);
+ res = kzalloc(size, flag);
...
- memset(res, 0, size);
//</smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Link: https://lore.kernel.org/r/20220312102705.71413-7-Julia.Lawall@inria.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Various spelling mistakes in comments.
Detected with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Link: https://lore.kernel.org/r/20220314115354.144023-12-Julia.Lawall@inria.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The code inside rtw_init_drv_sw() calls various init functions to
populate the padapter structure and checks for their return values
respectively.
But if one of the functions in middle fails then it simply returns
_FAIL instead of proper logging and calling freeing counterparts
of previous init functions.
This leads to various memory leaks and can be found in
/sys/kernel/debug/kmemleak if kernel is compiled with DEBUG_KMEMLEAK=y.
Fix this and keep the success and error separate.
Fixes: 2b42bd58b321 ("staging: r8188eu: introduce new os_dep dir for RTL8188eu driver")
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Vihas Makwana <makvihas@gmail.com>
Link: https://lore.kernel.org/r/20220309205047.45981-3-makvihas@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The _rtw_init_recv_priv() initializes precvpriv->signal_stat_timer and
sets it's timeout interval to 1000 ms. But _rtw_free_recv_priv()
doesn't cancel the timer and we need to explicitly call
_cancel_timer_ex() after we call _rtw_free_recv_priv() to cancel the
timer.
Call _cancel_timer_ex() from inside _rtw_free_recv_priv() as every init
function needs a matching free function.
Signed-off-by: Vihas Makwana <makvihas@gmail.com>
Link: https://lore.kernel.org/r/20220309205047.45981-2-makvihas@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Missing part of staging: vt6656: Remove unused rf_type in baseband.c
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/6e1ef287e66039f9013435f8fa1266de7387df2e.1647284830.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Missing part of staging: vt6656: Remove unused rf_type in card.c
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/09f65cf4839b089ad38f28ff691d5146e6095e58.1647284830.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Petr Machata says:
====================
netdevsim: Support for L3 HW stats
"L3 stats" is a suite of interface statistics aimed at reflecting traffic
taking place in a HW device, on an object corresponding to some software
netdevice. Support for this stats suite has been added recently, in commit
ca0a53dcec94 ("Merge branch 'net-hw-counters-for-soft-devices'").
In this patch set:
- Patch #1 adds support for L3 stats to netdevsim.
Real devices can have various conditions for when an L3 counter is
available. To simulate this, netdevsim maintains a list of devices
suitable for HW stats collection. Only when l3_stats is enabled on both a
netdevice itself, and in netdevsim, will netdevsim contribute values to
L3 stats.
This enablement and disablement is done via debugfs:
# echo $ifindex > /sys/kernel/debug/netdevsim/$DEV/hwstats/l3/enable_ifindex
# echo $ifindex > /sys/kernel/debug/netdevsim/$DEV/hwstats/l3/disable_ifindex
Besides this, there is a third toggle to mark a device for future failure:
# echo $ifindex > /sys/kernel/debug/netdevsim/$DEV/hwstats/l3/fail_next_enable
- This allows HW-independent testing of stats reporting and in-kernel APIs,
as well as a test for enablement rollback, which is difficult to do
otherwise. This netdevsim-specific selftest is added in patch #2.
- Patch #3 adds another driver-specific selftest, namely a test aimed at
checking mlxsw-induced stats monitoring events.
====================
Link: https://lore.kernel.org/r/cover.1647265833.git.petrm@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Merge series from Julia Lawall <Julia.Lawall@inria.fr>:
Various spelling mistakes in comments.
Detected with the help of Coccinelle.
---
drivers/base/devres.c | 4 ++--
drivers/clk/qcom/gcc-sm6125.c | 2 +-
drivers/clk/ti/clkctrl.c | 2 +-
drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c | 4 ++--
drivers/gpu/drm/amd/display/dc/bios/command_table.c | 6 +++---
drivers/gpu/drm/amd/pm/amdgpu_pm.c | 2 +-
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 4 ++--
drivers/gpu/drm/sti/sti_gdp.c | 2 +-
drivers/infiniband/hw/qib/qib_iba7220.c | 4 ++--
drivers/leds/leds-pca963x.c | 2 +-
drivers/media/i2c/ov5695.c | 2 +-
drivers/mfd/rohm-bd9576.c | 2 +-
drivers/mtd/ubi/block.c | 2 +-
drivers/net/can/usb/ucan.c | 4 ++--
drivers/net/ethernet/packetengines/yellowfin.c | 2 +-
drivers/net/wireless/ath/ath6kl/htc_mbox.c | 2 +-
drivers/net/wireless/cisco/airo.c | 2 +-
drivers/net/wireless/mediatek/mt76/mt7915/init.c | 2 +-
drivers/net/wireless/realtek/rtlwifi/rtl8821ae/dm.c | 6 +++---
drivers/platform/x86/uv_sysfs.c | 2 +-
drivers/s390/crypto/pkey_api.c | 2 +-
drivers/scsi/aic7xxx/aicasm/aicasm.c | 2 +-
drivers/scsi/elx/libefc_sli/sli4.c | 2 +-
drivers/scsi/lpfc/lpfc_mbox.c | 2 +-
drivers/scsi/qla2xxx/qla_gs.c | 2 +-
drivers/spi/spi-sun4i.c | 2 +-
drivers/staging/rtl8723bs/core/rtw_mlme.c | 2 +-
drivers/usb/gadget/udc/snps_udc_core.c | 2 +-
fs/kernfs/file.c | 2 +-
kernel/events/core.c | 2 +-
30 files changed, 39 insertions(+), 39 deletions(-)
|
|
Smatch complains:
fs/nfsd/nfsxdr.c:341 nfssvc_decode_writeargs()
warn: no lower bound on 'args->len'
Change the type to unsigned to prevent this issue.
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The mainline replacement for ashmem is memfd, so remove the legacy
code from drivers/staging/
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220315123457.2354812-1-hch@lst.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add a test that verifies that UAPI notifications are emitted, as mlxsw
installs and deinstalls HW counters for the L3 offload xstats.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a test that verifies basic UAPI contracts, netdevsim operation,
rollbacks after partial enablement in core, and UAPI notifications.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add support for testing of HW stats support that was added recently, namely
the L3 stats support. L3 stats are provided for devices for which the L3
stats have been turned on, and that were enabled for netdevsim through a
debugfs toggle:
# echo $ifindex > /sys/kernel/debug/netdevsim/$DEV/hwstats/l3/enable_ifindex
For fully enabled netdevices, netdevsim counts 10pps of ingress traffic and
20pps of egress traffic. Similarly, L3 stats can be disabled for a given
device, and netdevsim ceases pretending there is any HW traffic going on:
# echo $ifindex > /sys/kernel/debug/netdevsim/$DEV/hwstats/l3/disable_ifindex
Besides this, there is a third toggle to mark a device for future failure:
# echo $ifindex > /sys/kernel/debug/netdevsim/$DEV/hwstats/l3/fail_next_enable
A future request to enable L3 stats on such netdevice will be bounced by
netdevsim:
# ip -j l sh dev d | jq '.[].ifindex'
66
# echo 66 > /sys/kernel/debug/netdevsim/netdevsim10/hwstats/l3/enable_ifindex
# echo 66 > /sys/kernel/debug/netdevsim/netdevsim10/hwstats/l3/fail_next_enable
# ip stats set dev d l3_stats on
Error: netdevsim: Stats enablement set to fail.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Straightforward conversion.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
|
|
Removes a call to __set_page_dirty_nobuffers().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
|
|
Removes a call to __set_page_dirty_nobuffers().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
|
|
Removes several calls to __set_page_dirty_nobuffers(). Also turn the
PageSwapCache() case into a BUG() as there's no way for a swapcache page
to make it to a filesystem that doesn't use SWP_FS_OPS.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
|
|
Removes a call to __set_page_dirty_nobuffers().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
|
|
This is a trivial change.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
|
|
This removes a call to __set_page_dirty_nobuffers().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
|
|
These filesystems use __set_page_dirty_nobuffers() either directly or
with a very thin wrapper; convert them en masse.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
|
|
Optimise the non-DEBUG case to just call filemap_dirty_folio
directly. The DEBUG case doesn't actually compile, but convert
it to dirty_folio anyway.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
|
|
Convert all users of fscache_set_page_dirty to use fscache_dirty_folio.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
|
|
This replaces ->set_page_dirty(). It returns a bool instead of an int
and takes the address_space as a parameter instead of expecting the
implementations to retrieve the address_space from the page. This is
particularly important for filesystems which use FS_OPS for swap.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
|
|
With all users converted to ->launder_folio, remove ->launder_page.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
|
|
OrangeFS launders its pages from a number of locations, so add a
small amount of folio usage to its callers where it makes sense.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
|
|
We don't need to use page_file_mapping() here because launder_folio
is never called for swap cache pages. We also don't need to
cast an loff_t in order to print it.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
|
|
Straightforward conversion although the helper functions still assume
a single page.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
|
|
Straightforward conversion.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
|
|
Straightforward conversion.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
|
|
Trivial conversion.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
|
