| Age | Commit message (Collapse) | Author |
|---|
|
The skb isn't consumed in case of NETDEV_TX_BUSY, therefore don't
increment the tx_dropped counter.
Fixes: 188f4af04618 ("r8169: use NETDEV_TX_{BUSY/OK}")
Cc: stable@vger.kernel.org
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Link: https://patch.msgid.link/bbba9c48-8bac-4932-9aa1-d2ed63bc9433@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2024-07-31
We've added 2 non-merge commits during the last 2 day(s) which contain
a total of 2 files changed, 2 insertions(+), 2 deletions(-).
The main changes are:
1) Fix BPF selftest build after tree sync with regards to a _GNU_SOURCE
macro redefined compilation error, from Stanislav Fomichev.
2) Fix a wrong test in the ASSERT_OK() check in uprobe_syscall BPF selftest,
from Jiri Olsa.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf/selftests: Fix ASSERT_OK condition check in uprobe_syscall test
selftests/bpf: Filter out _GNU_SOURCE when compiling test_cpp
====================
Link: https://patch.msgid.link/20240731115706.19677-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When a buffer is evicted for memory pressure or TTM evict all,
the placement is set to the eviction domain, this means the
buffer never gets revalidated on the next exec to the correct domain.
I think this should be fine to use the initial domain from the
object creation, as least with VM_BIND this won't change after
init so this should be the correct answer.
Fixes: b88baab82871 ("drm/nouveau: implement new VM_BIND uAPI")
Cc: Danilo Krummrich <dakr@redhat.com>
Cc: <stable@vger.kernel.org> # v6.6
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240515025542.2156774-1-airlied@gmail.com
|
|
Add the CLK_IGNORE_UNUSED flag to the vp-axi clock (CLK_VP_AXI) to avoid
depending on clk_ignore_unused in the cmdline. Without this fix, the
emmc-sdio clock (CLK_EMMC_SDIO) fails to work after vp-axi is disabled.
Signed-off-by: Drew Fustini <drew@pdp7.com>
Link: https://lore.kernel.org/r/20240731061439.3807172-1-drew@pdp7.com
Fixes: ae81b69fd2b1 ("clk: thead: Add support for T-Head TH1520 AP_SUBSYS clocks")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
ip6table_nat_table_init() accesses net->gen->ptr[ip6table_nat_net_ops.id],
but the function is exposed to user space before the entry is allocated
via register_pernet_subsys().
Let's call register_pernet_subsys() before xt_register_template().
Fixes: fdacd57c79b7 ("netfilter: x_tables: never register tables by default")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
We had a report that iptables-restore sometimes triggered null-ptr-deref
at boot time. [0]
The problem is that iptable_nat_table_init() is exposed to user space
before the kernel fully initialises netns.
In the small race window, a user could call iptable_nat_table_init()
that accesses net_generic(net, iptable_nat_net_id), which is available
only after registering iptable_nat_net_ops.
Let's call register_pernet_subsys() before xt_register_template().
[0]:
bpfilter: Loaded bpfilter_umh pid 11702
Started bpfilter
BUG: kernel NULL pointer dereference, address: 0000000000000013
PF: supervisor write access in kernel mode
PF: error_code(0x0002) - not-present page
PGD 0 P4D 0
PREEMPT SMP NOPTI
CPU: 2 PID: 11879 Comm: iptables-restor Not tainted 6.1.92-99.174.amzn2023.x86_64 #1
Hardware name: Amazon EC2 c6i.4xlarge/, BIOS 1.0 10/16/2017
RIP: 0010:iptable_nat_table_init (net/ipv4/netfilter/iptable_nat.c:87 net/ipv4/netfilter/iptable_nat.c:121) iptable_nat
Code: 10 4c 89 f6 48 89 ef e8 0b 19 bb ff 41 89 c4 85 c0 75 38 41 83 c7 01 49 83 c6 28 41 83 ff 04 75 dc 48 8b 44 24 08 48 8b 0c 24 <48> 89 08 4c 89 ef e8 a2 3b a2 cf 48 83 c4 10 44 89 e0 5b 5d 41 5c
RSP: 0018:ffffbef902843cd0 EFLAGS: 00010246
RAX: 0000000000000013 RBX: ffff9f4b052caa20 RCX: ffff9f4b20988d80
RDX: 0000000000000000 RSI: 0000000000000064 RDI: ffffffffc04201c0
RBP: ffff9f4b29394000 R08: ffff9f4b07f77258 R09: ffff9f4b07f77240
R10: 0000000000000000 R11: ffff9f4b09635388 R12: 0000000000000000
R13: ffff9f4b1a3c6c00 R14: ffff9f4b20988e20 R15: 0000000000000004
FS: 00007f6284340000(0000) GS:ffff9f51fe280000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000013 CR3: 00000001d10a6005 CR4: 00000000007706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
? show_trace_log_lvl (arch/x86/kernel/dumpstack.c:259)
? show_trace_log_lvl (arch/x86/kernel/dumpstack.c:259)
? xt_find_table_lock (net/netfilter/x_tables.c:1259)
? __die_body.cold (arch/x86/kernel/dumpstack.c:478 arch/x86/kernel/dumpstack.c:420)
? page_fault_oops (arch/x86/mm/fault.c:727)
? exc_page_fault (./arch/x86/include/asm/irqflags.h:40 ./arch/x86/include/asm/irqflags.h:75 arch/x86/mm/fault.c:1470 arch/x86/mm/fault.c:1518)
? asm_exc_page_fault (./arch/x86/include/asm/idtentry.h:570)
? iptable_nat_table_init (net/ipv4/netfilter/iptable_nat.c:87 net/ipv4/netfilter/iptable_nat.c:121) iptable_nat
xt_find_table_lock (net/netfilter/x_tables.c:1259)
xt_request_find_table_lock (net/netfilter/x_tables.c:1287)
get_info (net/ipv4/netfilter/ip_tables.c:965)
? security_capable (security/security.c:809 (discriminator 13))
? ns_capable (kernel/capability.c:376 kernel/capability.c:397)
? do_ipt_get_ctl (net/ipv4/netfilter/ip_tables.c:1656)
? bpfilter_send_req (net/bpfilter/bpfilter_kern.c:52) bpfilter
nf_getsockopt (net/netfilter/nf_sockopt.c:116)
ip_getsockopt (net/ipv4/ip_sockglue.c:1827)
__sys_getsockopt (net/socket.c:2327)
__x64_sys_getsockopt (net/socket.c:2342 net/socket.c:2339 net/socket.c:2339)
do_syscall_64 (arch/x86/entry/common.c:51 arch/x86/entry/common.c:81)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
RIP: 0033:0x7f62844685ee
Code: 48 8b 0d 45 28 0f 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 37 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 0a c3 66 0f 1f 84 00 00 00 00 00 48 8b 15 09
RSP: 002b:00007ffd1f83d638 EFLAGS: 00000246 ORIG_RAX: 0000000000000037
RAX: ffffffffffffffda RBX: 00007ffd1f83d680 RCX: 00007f62844685ee
RDX: 0000000000000040 RSI: 0000000000000000 RDI: 0000000000000004
RBP: 0000000000000004 R08: 00007ffd1f83d670 R09: 0000558798ffa2a0
R10: 00007ffd1f83d680 R11: 0000000000000246 R12: 00007ffd1f83e3b2
R13: 00007f628455baa0 R14: 00007ffd1f83d7b0 R15: 00007f628457a008
</TASK>
Modules linked in: iptable_nat(+) bpfilter rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache veth xt_state xt_connmark xt_nat xt_statistic xt_MASQUERADE xt_mark xt_addrtype ipt_REJECT nf_reject_ipv4 nft_chain_nat nf_nat xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 xt_comment nft_compat nf_tables nfnetlink overlay nls_ascii nls_cp437 vfat fat ghash_clmulni_intel aesni_intel ena crypto_simd ptp cryptd i8042 pps_core serio button sunrpc sch_fq_codel configfs loop dm_mod fuse dax dmi_sysfs crc32_pclmul crc32c_intel efivarfs
CR2: 0000000000000013
Fixes: fdacd57c79b7 ("netfilter: x_tables: never register tables by default")
Reported-by: Takahiro Kawahara <takawaha@amazon.co.jp>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Commit in Fixes was added as a catch-all for cases where the cmdline is
parsed before being merged with the builtin one.
And promptly one issue appeared, see Link below. The microcode loader
really needs to parse it that early, but the merging happens later.
Reshuffling the early boot nightmare^W code to handle that properly would
be a painful exercise for another day so do the chicken thing and parse the
builtin cmdline too before it has been merged.
Fixes: 0c40b1c7a897 ("x86/setup: Warn when option parsing is done too early")
Reported-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240730152108.GAZqkE5Dfi9AuKllRw@fat_crate.local
Link: https://lore.kernel.org/r/20240722152330.GCZp55ck8E_FT4kPnC@fat_crate.local
|
|
Allow userspace to use damage clips with atomic async flips. Damage
clips are useful for partial plane updates, which can be helpful for
clients that want to do flips asynchronously.
Fixes: 0e26cc72c71c ("drm: Refuse to async flip with atomic prop changes")
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/20240702212215.109696-2-andrealmeid@igalia.com
|
|
Allow userspace to use explicit synchronization with atomic async flips.
That means that the flip will wait for some hardware fence, and then
will flip as soon as possible (async) in regard of the vblank.
Fixes: 0e26cc72c71c ("drm: Refuse to async flip with atomic prop changes")
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/20240702212215.109696-1-andrealmeid@igalia.com
|
|
The Python finished() helper currently exits with KSFT_FAIL when there
are only passed and skipped tests. Fix the logic to exit with KSFT_PASS
instead, making it consistent with its C and bash counterparts
(ksft_finished() and ktap_finished() respectively).
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Fixes: dacf1d7a78bf ("kselftest: Add test to verify probe of devices from discoverable buses")
Signed-off-by: Laura Nao <laura.nao@collabora.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The abs-fuzz and abs-flat properties are documented as optional. When
these are absent, fwnode_property_read_u32() will leave the input
unchanged, meaning that an axis either picks up the value for the
previous axis or an uninitialized value.
Explicitly set these values to zero when they are unspecified to match
the documented behaviour in the device tree bindings.
Signed-off-by: John Keeping <jkeeping@inmusicbrands.com>
Link: https://lore.kernel.org/r/20240731093310.3696919-1-jkeeping@inmusicbrands.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The recent regression report revealed that the use of WC pages for AMD
HDMI device together with AMD IOMMU leads to unexpected truncation or
noises. The issue seems triggered by the change in the kernel core
memory allocation that enables IOMMU driver to use always S/G
buffers. Meanwhile, the use of WC pages has been a workaround for the
similar issue with standard pages in the past. So, now we need to
apply the workaround conditionally, namely, only when IOMMU isn't in
place.
This patch modifies the workaround code to check the DMA ops at first
and apply the snoop-off only when needed.
Fixes: f5ff79fddf0e ("dma-mapping: remove CONFIG_DMA_REMAP")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219087
Link: https://patch.msgid.link/20240731170521.31714-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
David Laight pointed out that we should deal with the min3() and max3()
mess too, which still does excessive expansion.
And our current macros are actually rather broken.
In particular, the macros did this:
#define min3(x, y, z) min((typeof(x))min(x, y), z)
#define max3(x, y, z) max((typeof(x))max(x, y), z)
and that not only is a nested expansion of possibly very complex
arguments with all that involves, the typing with that "typeof()" cast
is completely wrong.
For example, imagine what happens in max3() if 'x' happens to be a
'unsigned char', but 'y' and 'z' are 'unsigned long'. The types are
compatible, and there's no warning - but the result is just random
garbage.
No, I don't think we've ever hit that issue in practice, but since we
now have sane infrastructure for doing this right, let's just use it.
It fixes any excessive expansion, and also avoids these kinds of broken
type issues.
Requested-by: David Laight <David.Laight@aculab.com>
Acked-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The Linux-internal Xlinuxenvcfg ISA extension is omitted from the
riscv_isa_ext array because it has no DT binding and should not appear
in /proc/cpuinfo. The logic added in commit 625034abd52a ("riscv: add
ISA extensions validation callback") assumes all extensions are included
in riscv_isa_ext, and so riscv_resolve_isa() wrongly drops Xlinuxenvcfg
from the final ISA string. Instead, accept such Linux-internal ISA
extensions as if they have no validation callback.
Fixes: 625034abd52a ("riscv: add ISA extensions validation callback")
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20240718213011.2600150-1-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Enable switching between UHBR and non-UHBR link rates on MST links when
reducing the link parameters after an LT failure.
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240722165503.2084999-15-imre.deak@intel.com
|
|
As explained in the previous patch, the MST link BW reported by branch
devices during topology probing/path resources enumeration depends on
the link parameters programmed to DPCD to be up-to-date. After a sink is
plugged this is not ensured, as those DPCD values start out zeroed. The
target link parameters (for a subsequent modeset) are the maximum that
is supported, so make sure these maximum values are programmed before the
topology probing.
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240722165503.2084999-14-imre.deak@intel.com
|
|
The MST link BW reported by branch devices via the ENUM_PATH_RESOURCES
message depends on the channel coding and link rate/lane count
parameters programmed to DPCD. This is the case at least for some branch
devices, while for others the reported BW is independent of the link
parameters. In any case the DP standard requires the branch device to
adjust the returned value to both account for the different way the BW
for FEC is accounted for (included in the returned value for non-UHBR
and not included for UHBR rates) and to limit the returned value to the
(trained) link BW between the source and first downstream branch
device, see DP v2.0/v2.1 Figure 2-94, DP v2.1 5.9.7. Presumedly this is
also the reason why the standard requires the DPCD link rate/lane count
values being up-to-date before sending the ENUM_PATH_RESOURCES message,
see DP v2.1 2.14.9.4.
Based on the above reprobe the MST topology after the link is retrained
with new link parameters to make sure that the MST link BW tracked in
the MST topology state (via each topology port's full_pbn value) is
up-to-date.
The next patch will make sure that the MST link BW is also kept
up-to-date if the link is disabled.
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240722165503.2084999-13-imre.deak@intel.com
|
|
If the MST payload allocation failed, enabling the output also failed
most probably, so send a uevent accordinly requesting the user to retry
the modeset. While at it remove the driver specific debug message, there
is already one printed by drm_dp_add_payload_part1().
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240722165503.2084999-12-imre.deak@intel.com
|
|
The MST topology probing depends on the maximum link parameters -
programmed to DPCD if required by a follow-up patch - so make sure these
parameters are up-to-date before configuring and probing the MST
topology.
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240722165503.2084999-11-imre.deak@intel.com
|
|
On MST links - at least for some MST branch devices - the list of modes
returned to users on an enabled link depends on the current link
rate/lane count parameters (besides the DPRX link capabilities, any MST
branch BW limit and the maximum link parameters reduced after LT
failures). In particular the MST branch BW limit may depend on the link
rate/lane count parameters programmed to DPCD. After an LT failure and
limiting the maximum link parameters accordingly, users should see a
mode list reflecting these new limits. However with the current fallback
order this isn't ensured, as the new limit could allow for modes
requiring a higher link BW, but these modes will be filtered out due to
the enabled link's lower link BW.
Ensure that the mode list changes in a consistent way after a link
training failure and reducing the link parameters by changing the
fallback order on MST links to happen in BW order.
v2:
- s/INTEL_DP_MAX_SUPPORTED_LANE_COUNTS/INTEL_DP_MAX_SUPPORTED_LANE_CONFIGS
and s/num_common_lane_counts/num_common_lane_configs to make the
difference wrt. max lane counts clearer. (Suraj)
- Add a TODO comment to make the SST fallback logic work the same way as
MST. (Arun)
- Use sort_r()'s default swap function instead of a custom one.
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Cc: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240729144458.2763667-1-imre.deak@intel.com
|
|
Add helpers to set the link mode and BW parameters. These are required
by a follow-up patch setting the parameters for a disabled link.
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240722165503.2084999-9-imre.deak@intel.com
|
|
A follow-up patch will add an alternative way to reduce the link
parameters in BW order on MST links, prepare for that here.
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240722165503.2084999-8-imre.deak@intel.com
|
|
There are multiple failure cases a modeset-retry uevent can be sent for
a link (TBT tunnel BW allocation failure, unrecoverable link training
failure), a follow-up patch adding the handling for a new case where the
DP MST payload allocation fails. The uevent is the same in all cases,
sent to all the connectors on the link, so in case of multiple failures
there is no point in sending a separate uevent for each failure; prevent
this, sending only a single modeset-retry uevent for a commit.
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240722165503.2084999-7-imre.deak@intel.com
|
|
Initialize the DP link parameters during HW readout. These need to be
up-to-date at least for the MST topology probing, which depends on the
link rate and lane count programmed in DPCD. A follow-up patch will
program the DPCD values to reflect the maximum link parameters before
the first MST topology probing, but should do so only if the link is
disabled (link_trained==false).
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240722165503.2084999-6-imre.deak@intel.com
|
|
If the DDI encoder output is enabled in HDMI mode there is no point in
calling intel_dp_sync_state(), as in that case the DPCD initialization
will fail - as expected - with AUX timeouts. Prevent calling the hook in
this case.
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240722165503.2084999-5-imre.deak@intel.com
|
|
In the
if (old_ddps != port->ddps || !created)
if (port->ddps && !port->input)
ret = drm_dp_send_enum_path_resources();
sequence the first if's condition is true if the port exists already
(!created) or the port was created anew (hence old_ddps==0) and it was
in the plugged state (port->ddps==1). The second if's condition is true
for output ports in the plugged state. So the function is called for an
output port in the plugged state, regardless if it already existed or
not and regardless of the old plugged state. In all other cases
port->full_pbn can be zeroed as the port is either an input for which
full_pbn is never set, or an output in the unplugged state for which
full_pbn was already zeroed previously or the port was just created
(with port->full_pbn==0).
Simplify the condition, making it clear that the path resources are
always enumerated for an output port in the plugged state.
Cc: Lyude Paul <lyude@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240722165503.2084999-4-imre.deak@intel.com
|
|
A follow up i915 patch will need to reprobe the MST topology after the
initial probing, add a helper for this.
Cc: Lyude Paul <lyude@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240722165503.2084999-3-imre.deak@intel.com
|
|
Factor out a function to queue a work for probing the topology, also
used by the next patch.
Cc: Lyude Paul <lyude@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240722165503.2084999-2-imre.deak@intel.com
|
|
shuffle few fields to reduce the holes within nvme_ns_head.
On x86_64, the size is reduced to 1104 bytes from 1120 bytes.
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
u8 fits the need, so stop using int for it.
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
pi_offset field is not required to be present in nvme_ns_head.
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The fujitsu,mb85rs256 is a 256 Kbit SPI memory FRAM in the same family
as the two existing fujitsu,mb85rs* compatibles and at25 compatible.
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240612092934.12282-1-francesco@dolcini.it
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
There is no added security by making the inittext section non-writable,
however it does split part of the kernel mapping into 4K mappings
instead of 1M mappings:
---[ Kernel Image Start ]---
0x000003ffe0000000-0x000003ffe0e00000 14M PMD RO X
0x000003ffe0e00000-0x000003ffe0ec7000 796K PTE RO X
0x000003ffe0ec7000-0x000003ffe0f00000 228K PTE RO NX
0x000003ffe0f00000-0x000003ffe1300000 4M PMD RO NX
0x000003ffe1300000-0x000003ffe1353000 332K PTE RO NX
0x000003ffe1353000-0x000003ffe1400000 692K PTE RW NX
0x000003ffe1400000-0x000003ffe1500000 1M PMD RW NX
0x000003ffe1500000-0x000003ffe1700000 2M PTE RW NX <---
0x000003ffe1700000-0x000003ffe1800000 1M PMD RW NX
0x000003ffe1800000-0x000003ffe187e000 504K PTE RW NX
---[ Kernel Image End ]---
Keep the inittext writable and enable instruction execution protection
(aka noexec) later to prevent this. This also allows to use the
generic free_initmem() implementation.
---[ Kernel Image Start ]---
0x000003ffe0000000-0x000003ffe0e00000 14M PMD RO X
0x000003ffe0e00000-0x000003ffe0ec7000 796K PTE RO X
0x000003ffe0ec7000-0x000003ffe0f00000 228K PTE RO NX
0x000003ffe0f00000-0x000003ffe1300000 4M PMD RO NX
0x000003ffe1300000-0x000003ffe1353000 332K PTE RO NX
0x000003ffe1353000-0x000003ffe1400000 692K PTE RW NX
0x000003ffe1400000-0x000003ffe1800000 4M PMD RW NX <---
0x000003ffe1800000-0x000003ffe187e000 504K PTE RW NX
---[ Kernel Image End ]---
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
The .data.rel.ro and .got section were added between the rodata and
ro_after_init data section, which adds an RW mapping in between all RO
mapping of the kernel image:
---[ Kernel Image Start ]---
0x000003ffe0000000-0x000003ffe0e00000 14M PMD RO X
0x000003ffe0e00000-0x000003ffe0ec7000 796K PTE RO X
0x000003ffe0ec7000-0x000003ffe0f00000 228K PTE RO NX
0x000003ffe0f00000-0x000003ffe1300000 4M PMD RO NX
0x000003ffe1300000-0x000003ffe1331000 196K PTE RO NX
0x000003ffe1331000-0x000003ffe13b3000 520K PTE RW NX <---
0x000003ffe13b3000-0x000003ffe13d5000 136K PTE RO NX
0x000003ffe13d5000-0x000003ffe1400000 172K PTE RW NX
0x000003ffe1400000-0x000003ffe1500000 1M PMD RW NX
0x000003ffe1500000-0x000003ffe1700000 2M PTE RW NX
0x000003ffe1700000-0x000003ffe1800000 1M PMD RW NX
0x000003ffe1800000-0x000003ffe187e000 504K PTE RW NX
---[ Kernel Image End ]---
Move the ro_after_init data section again right behind the rodata
section to prevent interleaving RO and RW mappings:
---[ Kernel Image Start ]---
0x000003ffe0000000-0x000003ffe0e00000 14M PMD RO X
0x000003ffe0e00000-0x000003ffe0ec7000 796K PTE RO X
0x000003ffe0ec7000-0x000003ffe0f00000 228K PTE RO NX
0x000003ffe0f00000-0x000003ffe1300000 4M PMD RO NX
0x000003ffe1300000-0x000003ffe1353000 332K PTE RO NX
0x000003ffe1353000-0x000003ffe1400000 692K PTE RW NX
0x000003ffe1400000-0x000003ffe1500000 1M PMD RW NX
0x000003ffe1500000-0x000003ffe1700000 2M PTE RW NX
0x000003ffe1700000-0x000003ffe1800000 1M PMD RW NX
0x000003ffe1800000-0x000003ffe187e000 504K PTE RW NX
---[ Kernel Image End ]---
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Since __va(0) does not translate to NULL anymore remove RELOC_HIDE()
which was only added to get rid of a compile warning with clang W=1:
arch/s390/mm/vmem.c:666:36: warning: performing pointer arithmetic on
a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
666 | __set_memory_4k(__va(0), __va(0) + ident_map_size);
| ~~~~~~~ ^
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Use the sort() from lib/sort.c to sort markers instead of the private
implementation. The current implementation does not sort markers
properly if they have to be moved downwards:
---[ Real Memory Copy Area Start ]---
0x0000035b903ff000-0x0000035b90400000 4K PTE I
---[ vmalloc Area Start ]---
---[ Real Memory Copy Area End ]---
Add a new member to each marker which indicates if a marker is start
of an area. If addresses of areas are equal consider an address which
defines the start of an area higher than the address which defines the
end of an area. In result the output is sorted as intended:
---[ Real Memory Copy Area Start ]---
0x0000019cedcff000-0x0000019cedd00000 4K PTE I
---[ Real Memory Copy Area End ]---
---[ vmalloc Area Start ]---
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
The page table dumper contains a hard coded assumption that the first
mapped area starts at address zero. With a relocated lowcore this is
not true anymore. Subsequently the first entry (lowcore) is printed as
if it would contain everything from address zero until the end of the
location of the lowcore area.
Fix this by adding a single "Kernel Virtual Address Space" entry,
which always starts at address zero. It ends when the lowcore area
starts which is either address zero, or its relocated address.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Since virtual and real addresses are not the same anymore the
assumption that the kernel image is contained within the identity
mapping is also not true anymore.
Fix this by adding two explicit areas and at the correct locations: one
for the 8kb lowcore area, and one for the identity mapping.
Fixes: c98d2ecae08f ("s390/mm: Uncouple physical vs virtual address spaces")
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
With ARCH=s390, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/s390/cio/ccwgroup.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/s390/cio/vfio_ccw.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240715-md-s390-drivers-s390-cio-v2-1-97eaa6971124@quicinc.com
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Remove the unused and empty arch/s390/kernel/alternative.h header
file which was added by mistake.
Fixes: 5ade5be4edf8 ("s390: Add infrastructure to patch lowcore accesses")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
With the recent rewrite of the fpu code exception handling for the
lfpc instruction within load_fpu_state() was erroneously removed.
Add it again to prevent that loading invalid floating point register
values cause an unhandled specification exception.
Fixes: 8c09871a950a ("s390/fpu: limit save and restore to used registers")
Cc: stable@vger.kernel.org
Reported-by: Aristeu Rozanski <aris@redhat.com>
Tested-by: Aristeu Rozanski <aris@redhat.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
USB-audio driver puts SNDRV_CHMAP_SL and _SR as left and right
surround channels for UAC1 channel map, respectively. But they should
have been SNDRV_CHMAP_RL and _RR; the current value *_SL and _SR are
rather "side" channels, not "surround". I guess I took those
mistakenly when I read the spec mentioning "surround left".
This patch corrects those entries to be the right channels.
Suggested-by: Sylvain BERTRAND <sylvain.bertrand@legeek.net>
Closes: https://lore.kernel.orgZ/qIyJD8lhd8hFhlC@freedom
Fixes: 04324ccc75f9 ("ALSA: usb-audio: add channel map support")
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240731142018.24750-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
NAU8822 codec PLL parameters are not an information that the general
user should care about, this print is supposed to be used for debugging,
adjust the debug print priority accordingly.
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://patch.msgid.link/20240731114828.61238-1-francesco@dolcini.it
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This driver is intended as a "client" end of the console connection.
When connected to a host it's supposed to receive debug logs, and
possibly allow to interact with whatever debug console is available
there. Feeding messages back, depending on a configuration may cause log
messages be executed as shell commands (which can be really bad if one
is unlucky, imagine a log message like "prevented running `rm -rf
/home`"). In case of Xen, it exposes sysrq-like debug interface, and
feeding it its own logs will pretty quickly hit 'R' for "instant
reboot".
Contrary to a classic serial console, the USB one cannot be configured
ahead of time, as the device shows up only when target OS is up. And at
the time device is opened to execute relevant ioctl, it's already too
late, especially when logs start flowing shortly after device is
initialized.
Avoid the issue by changing default to no echo for this type of devices.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
[ johan: amend summary; disable also ECHONL ]
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
RPN with 127:127 is treated as a Null RPN, just to reset the
parameters, and it's not translated to MIDI2. Although the current
code can work as is in most cases, better to implement the RPN reset
explicitly for Null message.
Link: https://patch.msgid.link/20240731130528.12600-6-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Just like the core UMP conversion helper, we need to deal with the
partially-filled RPN/NRPN data in the sequencer UMP converter as
well.
Link: https://patch.msgid.link/20240731130528.12600-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The UMP core conversion helper API already defines the context needed
to record the bank and RPN/NRPN values, and we can simply re-use the
same struct instead of re-defining the same content as a different
name.
Link: https://patch.msgid.link/20240731130528.12600-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
RPN with 127:127 is treated as a Null RPN, just to reset the
parameters, and it's not translated to MIDI2. Although the current
code can work as is in most cases, better to implement the RPN reset
explicitly for Null message.
Link: https://patch.msgid.link/20240731130528.12600-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The UMP 1.1 spec says that an RPN/NRPN should be sent when one of the
following occurs:
* a CC 38 is received
* a subsequent CC 6 is received
* a CC 98, 99, 100, and 101 is received, indicating the last RPN/NRPN
message has ended and a new one has started
That said, we should send a partial data even if it's not fully
filled. Let's change the UMP conversion helper code to follow that
rule.
Link: https://patch.msgid.link/20240731130528.12600-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
uevent_show() wants to de-reference dev->driver->name. There is no clean
way for a device attribute to de-reference dev->driver unless that
attribute is defined via (struct device_driver).dev_groups. Instead, the
anti-pattern of taking the device_lock() in the attribute handler risks
deadlocks with code paths that remove device attributes while holding
the lock.
This deadlock is typically invisible to lockdep given the device_lock()
is marked lockdep_set_novalidate_class(), but some subsystems allocate a
local lockdep key for @dev->mutex to reveal reports of the form:
======================================================
WARNING: possible circular locking dependency detected
6.10.0-rc7+ #275 Tainted: G OE N
------------------------------------------------------
modprobe/2374 is trying to acquire lock:
ffff8c2270070de0 (kn->active#6){++++}-{0:0}, at: __kernfs_remove+0xde/0x220
but task is already holding lock:
ffff8c22016e88f8 (&cxl_root_key){+.+.}-{3:3}, at: device_release_driver_internal+0x39/0x210
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&cxl_root_key){+.+.}-{3:3}:
__mutex_lock+0x99/0xc30
uevent_show+0xac/0x130
dev_attr_show+0x18/0x40
sysfs_kf_seq_show+0xac/0xf0
seq_read_iter+0x110/0x450
vfs_read+0x25b/0x340
ksys_read+0x67/0xf0
do_syscall_64+0x75/0x190
entry_SYSCALL_64_after_hwframe+0x76/0x7e
-> #0 (kn->active#6){++++}-{0:0}:
__lock_acquire+0x121a/0x1fa0
lock_acquire+0xd6/0x2e0
kernfs_drain+0x1e9/0x200
__kernfs_remove+0xde/0x220
kernfs_remove_by_name_ns+0x5e/0xa0
device_del+0x168/0x410
device_unregister+0x13/0x60
devres_release_all+0xb8/0x110
device_unbind_cleanup+0xe/0x70
device_release_driver_internal+0x1c7/0x210
driver_detach+0x47/0x90
bus_remove_driver+0x6c/0xf0
cxl_acpi_exit+0xc/0x11 [cxl_acpi]
__do_sys_delete_module.isra.0+0x181/0x260
do_syscall_64+0x75/0x190
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The observation though is that driver objects are typically much longer
lived than device objects. It is reasonable to perform lockless
de-reference of a @driver pointer even if it is racing detach from a
device. Given the infrequency of driver unregistration, use
synchronize_rcu() in module_remove_driver() to close any potential
races. It is potentially overkill to suffer synchronize_rcu() just to
handle the rare module removal racing uevent_show() event.
Thanks to Tetsuo Handa for the debug analysis of the syzbot report [1].
Fixes: c0a40097f0bc ("drivers: core: synchronize really_probe() and dev_uevent()")
Reported-by: syzbot+4762dd74e32532cda5ff@syzkaller.appspotmail.com
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Closes: http://lore.kernel.org/5aa5558f-90a4-4864-b1b1-5d6784c5607d@I-love.SAKURA.ne.jp [1]
Link: http://lore.kernel.org/669073b8ea479_5fffa294c1@dwillia2-xfh.jf.intel.com.notmuch
Cc: stable@vger.kernel.org
Cc: Ashish Sangwan <a.sangwan@samsung.com>
Cc: Namjae Jeon <namjae.jeon@samsung.com>
Cc: Dirk Behme <dirk.behme@de.bosch.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/172081332794.577428.9738802016494057132.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
