summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-08-13drm/amd/sriov: extend NV_MAILBOX_POLL_MSG_TIMEDOUTVictor Zhao
on MI300/MI308 UBB products, when doing mode1 reset, since 1 gpu need to wait all 8 gpus finish mode1 reset and then do re-init. As observed, sometimes the gpu which triggered the reset need to wait 15s for all gpus to finish. If poll msg timeout, guest driver will send the reset message again, and may mess up the following reinit sequence on other gpus. So extend the time to cover the maximum time needed to recover. Signed-off-by: Victor Zhao <Victor.Zhao@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amd/display: Promote DAL to 3.2.296Martin Leung
This version brings along following fixes: - Fix some cursor issue - Fix print format specifiers in DC_LOG_IPS - Fix minor coding errors in dml21 phase 5 - Fix MST BW calculation Regression - Improve FAM control for DCN401 - Add null pointer checks for some code - Refactor 3DLUT for non-DMA - Optimize vstartup position for AS-SDP - Update to using new dccg callbacks - Enable otg synchronization logic for DCN321 - Disable DCN401 UCLK P-State support on full updates Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Martin Leung <Martin.Leung@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amd/display: Remove unnecessary call to REG_SEQ_SUBMIT|WAIT_DONERodrigo Siqueira
[why & how] Remove unnecessary call to REG_SEQ_SUBMIT and REG_SEQ_WAIT_DONE, since those macros are not necessary anymore at the dpp1 set degamma. Those are part of an old implementation. Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amd/display: Adjust cursor positionRodrigo Siqueira
[why & how] When the commit 9d84c7ef8a87 ("drm/amd/display: Correct cursor position on horizontal mirror") was introduced, it used the wrong calculation for the position copy for X. This commit uses the correct calculation for that based on the original patch. Fixes: 9d84c7ef8a87 ("drm/amd/display: Correct cursor position on horizontal mirror") Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amd/display: fix cursor offset on rotation 180Melissa Wen
[why & how] Cursor gets clipped off in the middle of the screen with hw rotation 180. Fix a miscalculation of cursor offset when it's placed near the edges in the pipe split case. Cursor bugs with hw rotation were reported on AMD issue tracker: https://gitlab.freedesktop.org/drm/amd/-/issues/2247 The issues on rotation 270 was fixed by: https://lore.kernel.org/amd-gfx/20221118125935.4013669-22-Brian.Chang@amd.com/ that partially addressed the rotation 180 too. So, this patch is the final bits for rotation 180. Reported-by: Xaver Hugl <xaver.hugl@gmail.com> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2247 Reviewed-by: Harry Wentland <harry.wentland@amd.com> Fixes: 9d84c7ef8a87 ("drm/amd/display: Correct cursor position on horizontal mirror") Signed-off-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13KVM: eventfd: Use synchronize_srcu_expedited() on shutdownLi RongQing
When hot-unplug a device which has many queues, and guest CPU will has huge jitter, and unplugging is very slow. It turns out synchronize_srcu() in irqfd_shutdown() caused the guest jitter and unplugging latency, so replace synchronize_srcu() with synchronize_srcu_expedited(), to accelerate the unplugging, and reduce the guest OS jitter, this accelerates the VM reboot too. Signed-off-by: Li RongQing <lirongqing@baidu.com> Message-ID: <20240711121130.38917-1-lirongqing@baidu.com> [Call it just once in irqfd_resampler_shutdown. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-08-13Merge tag '6.11-rc3-ksmbd-fixes' of git://git.samba.org/ksmbdLinus Torvalds
Pull smb server fixes from Steve French: "Two smb3 server fixes for access denied problem on share path checks" * tag '6.11-rc3-ksmbd-fixes' of git://git.samba.org/ksmbd: ksmbd: override fsids for smb2_query_info() ksmbd: override fsids for share path check
2024-08-13KVM: selftests: Add a testcase to verify x2APIC is fully readonlyMichal Luczaj
Add a test to verify that userspace can't change a vCPU's x2APIC ID by abusing KVM_SET_LAPIC. KVM models the x2APIC ID (and x2APIC LDR) as readonly, and silently ignores userspace attempts to change the x2APIC ID for backwards compatibility. Signed-off-by: Michal Luczaj <mhal@rbox.co> [sean: write changelog, add to existing test] Signed-off-by: Sean Christopherson <seanjc@google.com> Message-ID: <20240802202941.344889-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-08-13KVM: x86: Make x2APIC ID 100% readonlySean Christopherson
Ignore the userspace provided x2APIC ID when fixing up APIC state for KVM_SET_LAPIC, i.e. make the x2APIC fully readonly in KVM. Commit a92e2543d6a8 ("KVM: x86: use hardware-compatible format for APIC ID register"), which added the fixup, didn't intend to allow userspace to modify the x2APIC ID. In fact, that commit is when KVM first started treating the x2APIC ID as readonly, apparently to fix some race: static inline u32 kvm_apic_id(struct kvm_lapic *apic) { - return (kvm_lapic_get_reg(apic, APIC_ID) >> 24) & 0xff; + /* To avoid a race between apic_base and following APIC_ID update when + * switching to x2apic_mode, the x2apic mode returns initial x2apic id. + */ + if (apic_x2apic_mode(apic)) + return apic->vcpu->vcpu_id; + + return kvm_lapic_get_reg(apic, APIC_ID) >> 24; } Furthermore, KVM doesn't support delivering interrupts to vCPUs with a modified x2APIC ID, but KVM *does* return the modified value on a guest RDMSR and for KVM_GET_LAPIC. I.e. no remotely sane setup can actually work with a modified x2APIC ID. Making the x2APIC ID fully readonly fixes a WARN in KVM's optimized map calculation, which expects the LDR to align with the x2APIC ID. WARNING: CPU: 2 PID: 958 at arch/x86/kvm/lapic.c:331 kvm_recalculate_apic_map+0x609/0xa00 [kvm] CPU: 2 PID: 958 Comm: recalc_apic_map Not tainted 6.4.0-rc3-vanilla+ #35 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.2-1-1 04/01/2014 RIP: 0010:kvm_recalculate_apic_map+0x609/0xa00 [kvm] Call Trace: <TASK> kvm_apic_set_state+0x1cf/0x5b0 [kvm] kvm_arch_vcpu_ioctl+0x1806/0x2100 [kvm] kvm_vcpu_ioctl+0x663/0x8a0 [kvm] __x64_sys_ioctl+0xb8/0xf0 do_syscall_64+0x56/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7fade8b9dd6f Unfortunately, the WARN can still trigger for other CPUs than the current one by racing against KVM_SET_LAPIC, so remove it completely. Reported-by: Michal Luczaj <mhal@rbox.co> Closes: https://lore.kernel.org/all/814baa0c-1eaa-4503-129f-059917365e80@rbox.co Reported-by: Haoyu Wu <haoyuwu254@gmail.com> Closes: https://lore.kernel.org/all/20240126161633.62529-1-haoyuwu254@gmail.com Reported-by: syzbot+545f1326f405db4e1c3e@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/000000000000c2a6b9061cbca3c3@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> Message-ID: <20240802202941.344889-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-08-13drm/ast: astdp: fix loop timeout checkDan Carpenter
This code has an issue because it loops until "i" is set to UINT_MAX but the test for failure assumes that "i" is set to zero. The result is that it will only print an error message if we succeed on the very last try. Reformat the loop to count forwards instead of backwards. Fixes: 2281475168d2 ("drm/ast: astdp: Perform link training during atomic_enable") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/1ba8da25-2d09-4924-a4ff-c0714bfbb192@stanley.mountain
2024-08-13drm/amd/display: Improve FAM control for DCN401Rodrigo Siqueira
[why & how] When the commit 5324e2b205a2 ("drm/amd/display: Add driver support for future FAMS versions") was introduced, it missed some of the FAM2 code. This commit introduces the code that control the FAM enable and disable. Fixes: 5324e2b205a2 ("drm/amd/display: Add driver support for future FAMS versions") Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amd/display: Remove unused fieldRodrigo Siqueira
[why & how] Remove force_backlight_start_level since it is never used. Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amd/display: Fix MST BW calculation RegressionFangzhi Zuo
[Why & How] Revert commit 8b2cb32cf0c6 ("drm/amd/display: FEC overhead should be checked once for mst slot nums") Because causes bw calculation regression Cc: mario.limonciello@amd.com Cc: alexander.deucher@amd.com Reported-by: jirislaby@kernel.org Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3495 Closes: https://bugzilla.suse.com/show_bug.cgi?id=1228093 Reviewed-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amd/display: Enable otg synchronization logic for DCN321Loan Chen
[Why] Tiled display cannot synchronize properly after S3. The fix for commit 5f0c74915815 ("drm/amd/display: Fix for otg synchronization logic") is not enable in DCN321, which causes the otg is excluded from synchronization. [How] Enable otg synchronization logic in dcn321. Fixes: 5f0c74915815 ("drm/amd/display: Fix for otg synchronization logic") Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Loan Chen <lo-an.chen@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amd/display: remove redundant msg to pmfw at boot/resumeCharlene Liu
[why & how] this is to remove redundant msg to pmfw at boot/resume since bios already power up dcn. Reviewed-by: Chris Park <chris.park@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amd/display: Set max VTotal cap for dcn401Dillon Varone
[WHY&HOW] Set max VTotal cap for dcn401 because VTotal register is only 16 bits wide on dcn401. Reviewed-by: Chris Park <chris.park@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amd/display: Perform outstanding programming on full updatesDillon Varone
[WHY] In certain scenarios DC can internally trigger back to back full updates which will miss some required programming that is normally deferred until post update via optimize_bandwidth. [HOW] In back to back update scenarios, wait for pending updates to complete and perform any strictly required outstanding programming. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amd/display: Disable DCN401 UCLK P-State support on full updatesDillon Varone
[WHY&HOW] It is not guaranteed even for HW exclusive P-State methods (like VActive) that P-state will be supported properly until optimize bandwidth is called, so unconditionally disable it on full updates. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amd/display: Reduce redundant minimal transitions due to SubVPDillon Varone
[WHY] Stream ID's associated with phantom pipes can change often as they are reconstructed on full updates, however they can remain identical depending on the required update. [HOW] In the case phantom streams and pipe topologies remain the same between updates, mark the transition as seamless. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amd/display: Add null check for 'afb' in ↵Srinivasan Shanmugam
amdgpu_dm_plane_handle_cursor_update (v2) This commit adds a null check for the 'afb' variable in the amdgpu_dm_plane_handle_cursor_update function. Previously, 'afb' was assumed to be null, but was used later in the code without a null check. This could potentially lead to a null pointer dereference. Changes since v1: - Moved the null check for 'afb' to the line where 'afb' is used. (Alex) Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_plane.c:1298 amdgpu_dm_plane_handle_cursor_update() error: we previously assumed 'afb' could be null (see line 1252) Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Co-developed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amd/display: Optimize vstartup position for AS-SDPRobin Chen
[Why] In current design, the vstartup position is adjusted to vblank start position when AS-SDP is enabled. However when the vblank length is too big, it may over vstartup boundary. [How] To adjust vstartup position to 1 line before vsync position. Reviewed-by: Anthony Koo <anthony.koo@amd.com> Signed-off-by: Robin Chen <robin.chen@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amd/display: Fix print format specifiers in DC_LOG_IPSRoman Li
[Why] %d specifier is used for printing unsigned values. It can result in negative values in logs for unsigned variables. [How] Replace %d with %u for unsigned. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amdkfd: Handle queue destroy buffer access racePhilip Yang
Add helper function kfd_queue_unreference_buffers to reduce queue buffer refcount, separate it from release queue buffers. Because it is circular locking to hold dqm_lock to take vm lock, kfd_ioctl_destroy_queue should take vm lock, unreference queue buffers first, but not release queue buffers, to handle error in case failed to hold vm lock. Then hold dqm_lock to remove queue from queue list and then release queue buffers. Restore process worker restore queue hold dqm_lock, will always find the queue with valid queue buffers. v2 (Felix): - renamed kfd_queue_unreference_buffer(s) to kfd_queue_unref_bo_va(s) - added two FIXME comments for follow up Signed-off-by: Philip Yang <Philip.Yang@amd.com> Signed-off-by: Felix Kuehling <felix.kuehling@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13Documentation: dm-crypt.rst warning + error fixDaniel Yang
While building kernel documention using make htmldocs command, I was getting unexpected indentation error. Single description was given for two module parameters with wrong indentation. So, I corrected the indentation of both parameters and the description. Signed-off-by: Shibu kumar <shibukumar.bit@gmail.com> Signed-off-by: Daniel Yang <danielyangkang@gmail.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Fixes: 0d815e3400e6 ("dm-crypt: limit the size of encryption requests")
2024-08-13drm/amdkfd: fix partition query when setting up recommended sdma enginesJonathan Kim
When users dynamically set the partition mode through sysfs writes, this can lead to a double lock situation where the KFD is trying to take the partition lock when updating the recommended SDMA engines. Have the KFD reference its saved socket device number count instead. Also ensure we have enough SDMA xGMI engines to report the recommended engines in the first place. Fixes: e06b71b2313a ("drm/amdkfd: allow users to target recommended SDMA engines") Signed-off-by: Jonathan Kim <jonathan.kim@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amdgpu: fix ptr check warning in gfx12 ip_dumpSunil Khatri
Change condition, if (ptr == NULL) to if (!ptr) for a better format and fix the warning. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amdgpu: fix ptr check warning in gfx11 ip_dumpSunil Khatri
Change condition, if (ptr == NULL) to if (!ptr) for a better format and fix the warning. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amdgpu: fix ptr check warning in gfx10 ip_dumpSunil Khatri
Change condition, if (ptr == NULL) to if (!ptr) for a better format and fix the warning. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amdgpu: fix ptr check warning in gfx9 ip_dumpSunil Khatri
Change if (ptr == NULL) to if (!ptr) for a better format and fix the warning. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amd/display: Check null pointer before try to access itWayne Lin
[why & how] Make sure plane_state is not null before calling a function that dereferences it. Besides, remove redundant codes. Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amd/display: Check null pointer before try to access itRodrigo Siqueira
[why & how] Change the order of the pipe_ctx->plane_state check to ensure that plane_state is not null before accessing it. Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amd/display: guard otg disable w/a for testMuhammad Ahmed
[why & how] HW removed this w/a, but we will still keep it to avoid regression. but return in test mode. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Muhammad Ahmed <ahmed.ahmed@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amd/display: Add more logging for MALL static screenAurabindo Pillai
[why & how] print additional info for MALL related calculations and DMCUB messaging to aid debugging. Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amd/display: Update to using new dccg callbacksHansen Dsouza
[Why and how] Update to using new dccg callbacks Reviewed-by: Chris Park <chris.park@amd.com> Signed-off-by: Hansen Dsouza <Hansen.Dsouza@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amd/display: Unlock Pipes Based On DET AllocationAustin Zheng
[Why] DML21 does not allocate DET evenly between pipes. May result in underflow when unlocking the pipes as DET could be overallocated. [How] 1. Unlock pipes that have a decreased amount of DET allocation 2. Wait for the double buffer to be updated. 3. Unlock the remaining pipes. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Austin Zheng <Austin.Zheng@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amd/display: Check null pointers before using dc->clk_mgrAlex Hung
[WHY & HOW] dc->clk_mgr is null checked previously in the same function, indicating it might be null. Passing "dc" to "dc->hwss.apply_idle_power_optimizations", which dereferences null "dc->clk_mgr". (The function pointer resolves to "dcn35_apply_idle_power_optimizations".) This fixes 1 FORWARD_NULL issue reported by Coverity. Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amd/display: 3DLUT non-DMA refactorRelja Vojvodic
[Why] Currently the handling for 3DLUT is found in multiple different places, which causes issues when the different functions are not in sync with each other. Frequently bugs occur because the LUT handling is broken up, and what has already been handled isn't kept track of well, which can cause earlier changes to the LUT params to be overridden. [How] Remove DMA LUT handling from DCN401 and refactor legacy LUT handling in one place to make it easier to keep track of what has and needs to be done. Reviewed-by: Ilya Bakoulin <ilya.bakoulin@amd.com> Signed-off-by: Relja Vojvodic <Relja.Vojvodic@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amd/display: apply vmin optimization even if it doesn't reach vmin levelWenjing Liu
[why] Based on power measurement result, in most cases when display clock is higher than Vmin display clock, lowering display clock using dynamic ODM will improve overall power consumption by 0 to 4 watts even if we can't reach Vmin. [how] Allow vmin optimization applied even if dispclk can't reach Vmin. Reviewed-by: Austin Zheng <austin.zheng@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amd/display: fix minor coding errors where dml21 phase 5 uses wrong ↵Wenjing Liu
variables [why & how] There is a coding error which causes incorrect variables to be assigned in DML21 phase 5. Reviewed-by: Austin Zheng <austin.zheng@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amd/display: Add null check for 'afb' in amdgpu_dm_update_cursor (v2)Srinivasan Shanmugam
This commit adds a null check for the 'afb' variable in the amdgpu_dm_update_cursor function. Previously, 'afb' was assumed to be null at line 8388, but was used later in the code without a null check. This could potentially lead to a null pointer dereference. Changes since v1: - Moved the null check for 'afb' to the line where 'afb' is used. (Alex) Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:8433 amdgpu_dm_update_cursor() error: we previously assumed 'afb' could be null (see line 8388) Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Co-developed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13Revert "drm/amdgpu: add vcn ip dump ptr in vcn global struct"Sunil Khatri
This reverts commit f3392e662efdc095f10109f588aa4f3be86f7eb5. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13Revert "drm/amdgpu: add vcn_v3_0 ip dump support"Sunil Khatri
This reverts commit 58d283801d06d4434df6625ed6e6b8d2ba47fe65. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13Revert "drm/amdgpu: add print support for vcn_v3_0 ip dump"Sunil Khatri
This reverts commit cd162ae9bc3ba91eb630a1321afd3d1dde5f2000. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amdgpu/mes: add multiple mes ring instances supportJack Xiao
Add multiple mes ring instances in mes structure to support multiple mes pipes. Signed-off-by: Jack Xiao <Jack.Xiao@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amdgpu/mes12: update mes_v12_api_def.hJack Xiao
Update mes12 api definition. Signed-off-by: Jack Xiao <Jack.Xiao@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13Revert "drm/amdgpu: add vcn_v5_0 ip dump support"Sunil Khatri
This reverts commit a46a7bef7d41ee7787c246f47a656fbafe02f122. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amdgpu: add vcn_v5_0 ip dump supportSunil Khatri
Add support of vcn ip dump in the devcoredump for vcn_v5_0. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amdgpu/mes12: add API for legacy queue resetAlex Deucher
Add API for resetting kernel queues. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amdgpu/mes11: add API for legacy queue resetAlex Deucher
Add API for resetting kernel queues. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amdgpu/mes: add API for legacy queue resetAlex Deucher
Add API for resetting kernel queues. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>