| Age | Commit message (Collapse) | Author |
|---|
|
When enabling UBSAN on Raspberry Pi 5, we get the following warning:
[ 387.894977] UBSAN: array-index-out-of-bounds in drivers/gpu/drm/v3d/v3d_sched.c:320:3
[ 387.903868] index 7 is out of range for type '__u32 [7]'
[ 387.909692] CPU: 0 PID: 1207 Comm: kworker/u16:2 Tainted: G WC 6.10.3-v8-16k-numa #151
[ 387.919166] Hardware name: Raspberry Pi 5 Model B Rev 1.0 (DT)
[ 387.925961] Workqueue: v3d_csd drm_sched_run_job_work [gpu_sched]
[ 387.932525] Call trace:
[ 387.935296] dump_backtrace+0x170/0x1b8
[ 387.939403] show_stack+0x20/0x38
[ 387.942907] dump_stack_lvl+0x90/0xd0
[ 387.946785] dump_stack+0x18/0x28
[ 387.950301] __ubsan_handle_out_of_bounds+0x98/0xd0
[ 387.955383] v3d_csd_job_run+0x3a8/0x438 [v3d]
[ 387.960707] drm_sched_run_job_work+0x520/0x6d0 [gpu_sched]
[ 387.966862] process_one_work+0x62c/0xb48
[ 387.971296] worker_thread+0x468/0x5b0
[ 387.975317] kthread+0x1c4/0x1e0
[ 387.978818] ret_from_fork+0x10/0x20
[ 387.983014] ---[ end trace ]---
This happens because the UAPI provides only seven configuration
registers and we are reading the eighth position of this u32 array.
Therefore, fix the out-of-bounds read in `v3d_csd_job_run()` by
accessing only seven positions on the '__u32 [7]' array. The eighth
register exists indeed on V3D 7.1, but it isn't currently used. That
being so, let's guarantee that it remains unused and add a note that it
could be set in a future patch.
Fixes: 0ad5bc1ce463 ("drm/v3d: fix up register addresses for V3D 7.x")
Reported-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240809152001.668314-1-mcanal@igalia.com
|
|
When there are multiple ap interfaces on one band and with WED on,
turning the interface down will cause a kernel panic on MT798X.
Previously, cb_priv was freed in mtk_wed_setup_tc_block() without
marking NULL,and mtk_wed_setup_tc_block_cb() didn't check the value, too.
Assign NULL after free cb_priv in mtk_wed_setup_tc_block() and check NULL
in mtk_wed_setup_tc_block_cb().
----------
Unable to handle kernel paging request at virtual address 0072460bca32b4f5
Call trace:
mtk_wed_setup_tc_block_cb+0x4/0x38
0xffffffc0794084bc
tcf_block_playback_offloads+0x70/0x1e8
tcf_block_unbind+0x6c/0xc8
...
---------
Fixes: 799684448e3e ("net: ethernet: mtk_wed: introduce wed wo support")
Signed-off-by: Zheng Zhang <everything411@qq.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix the unexpected indentation errors.
drm_connector.c has some kerneldoc comments that were missing newlines.
This results in the following warnings when running make htmldocs:
./Documentation/gpu/drm-kms:538: ./drivers/gpu/drm/drm_connector.c:2344: WARNING: Definition list ends without a blank line; unexpected unindent. [docutils]
./Documentation/gpu/drm-kms:538: ./drivers/gpu/drm/drm_connector.c:2346: ERROR: Unexpected indentation. [docutils]
./Documentation/gpu/drm-kms:538: ./drivers/gpu/drm/drm_connector.c:2368: WARNING: Block quote ends without a blank line; unexpected unindent. [docutils]
./Documentation/gpu/drm-kms:538: ./drivers/gpu/drm/drm_connector.c:2381: ERROR: Unexpected indentation. [docutils]
Signed-off-by: Daniel Yang <danielyangkang@gmail.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
[hmahfooz: append drm/connector prefix]
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240809032350.226382-1-danielyangkang@gmail.com
|
|
The MANA driver's RX buffer alloc_size is passed into napi_build_skb() to
create SKB. skb_shinfo(skb) is located at the end of skb, and its alignment
is affected by the alloc_size passed into napi_build_skb(). The size needs
to be aligned properly for better performance and atomic operations.
Otherwise, on ARM64 CPU, for certain MTU settings like 4000, atomic
operations may panic on the skb_shinfo(skb)->dataref due to alignment fault.
To fix this bug, add proper alignment to the alloc_size calculation.
Sample panic info:
[ 253.298819] Unable to handle kernel paging request at virtual address ffff000129ba5cce
[ 253.300900] Mem abort info:
[ 253.301760] ESR = 0x0000000096000021
[ 253.302825] EC = 0x25: DABT (current EL), IL = 32 bits
[ 253.304268] SET = 0, FnV = 0
[ 253.305172] EA = 0, S1PTW = 0
[ 253.306103] FSC = 0x21: alignment fault
Call trace:
__skb_clone+0xfc/0x198
skb_clone+0x78/0xe0
raw6_local_deliver+0xfc/0x228
ip6_protocol_deliver_rcu+0x80/0x500
ip6_input_finish+0x48/0x80
ip6_input+0x48/0xc0
ip6_sublist_rcv_finish+0x50/0x78
ip6_sublist_rcv+0x1cc/0x2b8
ipv6_list_rcv+0x100/0x150
__netif_receive_skb_list_core+0x180/0x220
netif_receive_skb_list_internal+0x198/0x2a8
__napi_poll+0x138/0x250
net_rx_action+0x148/0x330
handle_softirqs+0x12c/0x3a0
Cc: stable@vger.kernel.org
Fixes: 80f6215b450e ("net: mana: Add support for jumbo frame")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add missed property phys, which indicate how connect to serdes phy.
Fix below warning:
arch/arm64/boot/dts/freescale/fsl-lx2160a-honeycomb.dtb: fsl-mc@80c000000: dpmacs:ethernet@7: Unevaluated properties are not allowed ('phys' was unexpected)
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Get drm-misc-next to the state of v6.11-rc2.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
Booting with CONFIG_DEBUG_VIRTUAL leads to following warning when
passing hugepage reservation on command line:
Kernel command line: hugepagesz=1g hugepages=1 hugepagesz=64m hugepages=1 hugepagesz=256m hugepages=1 noreboot
HugeTLB: allocating 1 of page size 1.00 GiB failed. Only allocated 0 hugepages.
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at arch/powerpc/include/asm/io.h:948 __alloc_bootmem_huge_page+0xd4/0x284
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 6.10.0-rc6-00396-g6b0e82791bd0-dirty #936
Hardware name: MPC8544DS e500v2 0x80210030 MPC8544 DS
NIP: c1020240 LR: c10201d0 CTR: 00000000
REGS: c13fdd30 TRAP: 0700 Not tainted (6.10.0-rc6-00396-g6b0e82791bd0-dirty)
MSR: 00021000 <CE,ME> CR: 44084288 XER: 20000000
GPR00: c10201d0 c13fde20 c130b560 e8000000 e8001000 00000000 00000000 c1420000
GPR08: 00000000 00028001 00000000 00000004 44084282 01066ac0 c0eb7c9c efffe149
GPR16: c0fc4228 0000005f ffffffff c0eb7d0c c0eb7cc0 c0eb7ce0 ffffffff 00000000
GPR24: c1441cec efffe153 e8001000 c14240c0 00000000 c1441d64 00000000 e8000000
NIP [c1020240] __alloc_bootmem_huge_page+0xd4/0x284
LR [c10201d0] __alloc_bootmem_huge_page+0x64/0x284
Call Trace:
[c13fde20] [c10201d0] __alloc_bootmem_huge_page+0x64/0x284 (unreliable)
[c13fde50] [c10207b8] hugetlb_hstate_alloc_pages+0x8c/0x3e8
[c13fdeb0] [c1021384] hugepages_setup+0x240/0x2cc
[c13fdef0] [c1000574] unknown_bootoption+0xfc/0x280
[c13fdf30] [c0078904] parse_args+0x200/0x4c4
[c13fdfa0] [c1000d9c] start_kernel+0x238/0x7d0
[c13fdff0] [c0000434] set_ivor+0x12c/0x168
Code: 554aa33e 7c042840 3ce0c142 80a7427c 5109a016 50caa016 7c9a2378 7fdcf378 4180000c 7c052040 41810160 7c095040 <0fe00000> 38c00000 40800108 3c60c0eb
---[ end trace 0000000000000000 ]---
This is due to virt_addr_valid() using high_memory before it is set.
high_memory is set in mem_init() using max_low_pfn, but max_low_pfn
is available long before, it is set in mem_topology_setup(). So just
like commit daa9ada2093e ("powerpc/mm: Fix boot crash with FLATMEM")
moved the setting of max_mapnr immediately after the call to
mem_topology_setup(), the same can be done for high_memory.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/62b69c4baad067093f39e7e60df0fe27a86b8d2a.1723100702.git.christophe.leroy@csgroup.eu
|
|
Commit 6b0e82791bd0 ("powerpc/e500: switch to 64 bits PGD on 85xx
(32 bits)") increased the size of PGD entries but failed to increase
the PGD directory.
Use the size of pgd_t instead of the size of pointers to calculate
the allocated size.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Fixes: 6b0e82791bd0 ("powerpc/e500: switch to 64 bits PGD on 85xx (32 bits)")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/1cdaacb391cbd3e0240f0e0faf691202874e9422.1723109462.git.christophe.leroy@csgroup.eu
|
|
Pawel Dembicki says:
====================
net: dsa: vsc73xx: fix MDIO bus access and PHY opera
This series are extracted patches from net-next series [0].
The VSC73xx driver has issues with PHY configuration. This patch series
fixes most of them.
The first patch synchronizes the register configuration routine with the
datasheet recommendations.
Patches 2-3 restore proper communication on the MDIO bus. Currently,
the write value isn't sent to the MDIO register, and without a busy check,
communication with the PHY can be interrupted. This causes the PHY to
receive improper configuration and autonegotiation could fail.
The fourth patch removes the PHY reset blockade, as it is no longer
required.
After fixing the MDIO operations, autonegotiation became possible.
The last patch removes the blockade, which became unnecessary after
the MDIO operations fix.
[0] https://patchwork.kernel.org/project/netdevbpf/list/?series=874739&state=%2A&archive=both
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When the vsc73xx mdio bus work properly, the generic autonegotiation
configuration works well.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Resetting the VSC73xx PHY was problematic because the MDIO bus, without
a busy check, read and wrote incorrect register values.
My investigation indicates that resetting the PHY only triggers changes
in configuration. However, improper register values written earlier
were only exposed after a soft reset.
The reset itself wasn't the issue; rather, the problem stemmed from
incorrect read and write operations.
A 'soft_reset' can now proceed normally. There are no reasons to keep
the VSC73xx from being reset.
This commit removes the reset blockade in the 'vsc73xx_phy_write'
function.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The VSC73xx has a busy flag used during MDIO operations. It is raised
when MDIO read/write operations are in progress. Without it, PHYs are
misconfigured and bus operations do not work as expected.
Fixes: 05bd97fc559d ("net: dsa: Add Vitesse VSC73xx DSA router driver")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In the 'vsc73xx_phy_write' function, the register value is missing,
and the phy write operation always sends zeros.
This commit passes the value variable into the proper register.
Fixes: 05bd97fc559d ("net: dsa: Add Vitesse VSC73xx DSA router driver")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
According to the datasheet description ("Port Mode Procedure" in 5.6.2),
the VSC73XX_MAC_CFG_WEXC_DIS bit is configured only for half duplex mode.
The WEXC_DIS bit is responsible for MAC behavior after an excessive
collision. Let's set it as described in the datasheet.
Fixes: 05bd97fc559d ("net: dsa: Add Vitesse VSC73xx DSA router driver")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In axiethernet header fix register defines comment description to be
inline with IP documentation. It updates MAC configuration register,
MDIO configuration register and frame filter control description.
Fixes: 8a3b7a252dca ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We can't dereference "skb" after calling vcc->push() because the skb
is released.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
On macOS, as reported by Daniel Gomez, getline() sets ENOTTY to errno
if it is requested to read from /dev/null.
If this is worth fixing, I would rather pass an empty file to
scripts/kallsyms instead of adding the ugly #ifdef __APPLE__.
Fixes: c442db3f49f2 ("kbuild: remove PROVIDE() for kallsyms symbols")
Reported-by: Daniel Gomez <da.gomez@samsung.com>
Closes: https://lore.kernel.org/all/20240807-macos-build-support-v1-12-4cd1ded85694@samsung.com/
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
|
|
These files do not use any macros defined in <linux/version.h>.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
|
|
Going forward, struct intel_display shall replace struct
drm_i915_private as the main display device data pointer type. Convert
intel_bios.[ch] to struct intel_display.
Do one drive-by conversion of unnecessary hex usage to decimal.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0d0261a53aff5f141b16b482222a5ffce78e176e.1723213547.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Going forward, struct intel_display shall replace struct
drm_i915_private as the main display device data pointer type. Convert
intel_opregion.[ch] to struct intel_display.
v2:
- Fix declarations for !CONFIG_ACPI (Imre, kernel test robot)
- Pass encoder/connector directly to intel_display() (Imre)
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/aef94503909bbbf95f0244dc382a4d4cd050b903.1723213547.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Prefer the short encoder/connector names for struct
intel_encoder/intel_connector variables and parameters.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/60c67da6b7282ab521366524109ade0470408cf8.1723213547.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Going forward, struct intel_display shall replace struct
drm_i915_private as the main display device data pointer type. Convert
intel_acpi.[ch] to struct intel_display.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/465436a3442807b49609fc55c9f652a29f96fd02.1723213547.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
This patch takes care of the following warnings during documentation
compiling:
./include/uapi/drm/drm_mode.h:869: warning: Function parameter or struct member 'width' not described in 'drm_plane_size_hint'
./include/uapi/drm/drm_mode.h:869: warning: Function parameter or struct member 'height' not described in 'drm_plane_size_hint'
Signed-off-by: Mohammed Anees <pvmohammedanees2003@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20240811101653.170223-1-pvmohammedanees2003@gmail.com
|
|
Add quirk orientation for Ayn Loki Max model.
This has been tested by JELOS team that uses their
own patched kernel for a while now and confirmed by
users in the ChimeraOS discord servers.
Signed-off-by: Bouke Sybren Haarsma <boukehaarsma23@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240728124731.168452-3-boukehaarsma23@gmail.com
|
|
Add quirk orientation for the Ayn Loki Zero.
This also has been tested/used by the JELOS team.
Signed-off-by: Bouke Sybren Haarsma <boukehaarsma23@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240728124731.168452-2-boukehaarsma23@gmail.com
|
|
Now that kmsg dump callback has the description parameter, use it in
the user panic screen.
This is the string passed to panic(), like "VFS: Unable to mount root
fs on xxx" or "Attempted to kill init! exitcode=0xxxx".
It gives a hint on why the panic occurred, without being too cryptic.
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20240807134902.458669-6-jfalempe@redhat.com
|
|
Move the copyright notice to the top of drm_panic.h, and add the
missing Red Hat copyright notice.
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240807134902.458669-5-jfalempe@redhat.com
|
|
drm_panic_[un]register() are only used by the core drm, and are not
intended to be called by other drm drivers, so move their prototypes
to drm_crtc_internal.h.
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240807134902.458669-4-jfalempe@redhat.com
|
|
drm_panic_[un]register() are called only from the core drm, so there
is no need to export them.
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240807134902.458669-3-jfalempe@redhat.com
|
|
There is no space between the last word, and the punctuation mark in
English.
Suggested-by: Diego Viola <diego.viola@gmail.com>
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240807134902.458669-2-jfalempe@redhat.com
|
|
Audio control requests that sets sampling frequency sometimes fail on
this card. Adding delay between control messages eliminates that problem.
Signed-off-by: Lianqin Hu <hulianqin@vivo.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/TYUPR06MB6217FF67076AF3E49E12C877D2842@TYUPR06MB6217.apcprd06.prod.outlook.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Pull Cirrus HD-audio quirks for HP G12 laptops.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Some of these laptop models have quirk IDs that are identical but have
different amplifier parts fitted, this difference is described in the
ACPI information.
The solution introduced for this product family can derive the required
component binding information from ACPI instead of hardcoding it,
supports the new variants of the CS35L56 being used and has generalized
naming that makes it applicable to other ALC+amp combinations.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20240802152215.20831-4-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi into topic/cirrus-hp-g12
spi: Add empty versions of ACPI lookup functions
A patch from Richard Fitzgerald adding dummy versions of the ACPI lookup
functions for SPI:
Provide empty versions of acpi_spi_count_resources(),
acpi_spi_device_alloc() and acpi_spi_find_controller_by_adev()
if the real functions are not being built.
This commit fixes two problems with the original definitions:
1) There wasn't an empty version of these functions
2) The #if only depended on CONFIG_ACPI. But the functions are implemented
in the core spi.c so CONFIG_SPI_MASTER must also be enabled for the real
functions to exist.
|
|
Log the address of the register that caused the timeout
interrupt by reading RMTIMEOUTREG_CAPTURE
--v2:
- Update RMTIMEOUTREG_CAPTURE naming (Suraj)
--v3:
- XeLpdp naming convention.
- Use if condition instead of else if
Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240807142106.1270213-1-mitulkumar.ajitkumar.golani@intel.com
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
- Fix 32-bit PTI for real.
pti_clone_entry_text() is called twice, once before initcalls so that
initcalls can use the user-mode helper and then again after text is
set read only. Setting read only on 32-bit might break up the PMD
mapping, which makes the second invocation of pti_clone_entry_text()
find the mappings out of sync and failing.
Allow the second call to split the existing PMDs in the user mapping
and synchronize with the kernel mapping.
- Don't make acpi_mp_wake_mailbox read-only after init as the mail box
must be writable in the case that CPU hotplug operations happen after
boot. Otherwise the attempt to start a CPU crashes with a write to
read only memory.
- Add a missing sanity check in mtrr_save_state() to ensure that the
fixed MTRR MSRs are supported.
Otherwise mtrr_save_state() ends up in a #GP, which is fixed up, but
the WARN_ON() can bring systems down when panic on warn is set.
* tag 'x86-urgent-2024-08-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mtrr: Check if fixed MTRRs exist before saving them
x86/paravirt: Fix incorrect virt spinlock setting on bare metal
x86/acpi: Remove __ro_after_init from acpi_mp_wake_mailbox
x86/mm: Fix PTI for i386 some more
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull time keeping fixes from Thomas Gleixner:
- Fix a couple of issues in the NTP code where user supplied values are
neither sanity checked nor clamped to the operating range. This
results in integer overflows and eventualy NTP getting out of sync.
According to the history the sanity checks had been removed in favor
of clamping the values, but the clamping never worked correctly under
all circumstances. The NTP people asked to not bring the sanity
checks back as it might break existing applications.
Make the clamping work correctly and add it where it's missing
- If adjtimex() sets the clock it has to trigger the hrtimer subsystem
so it can adjust and if the clock was set into the future expire
timers if needed. The caller should provide a bitmask to tell
hrtimers which clocks have been adjusted.
adjtimex() uses not the proper constant and uses CLOCK_REALTIME
instead, which is 0. So hrtimers adjusts only the clocks, but does
not check for expired timers, which might make them expire really
late. Use the proper bitmask constant instead.
* tag 'timers-urgent-2024-08-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timekeeping: Fix bogus clock_was_set() invocation in do_adjtimex()
ntp: Safeguard against time_constant overflow
ntp: Clamp maxerror and esterror to operating range
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"Three small fixes for interrupt core and drivers:
- The interrupt core fails to honor caller supplied affinity hints
for non-managed interrupts and uses the system default affinity on
startup instead. Set the missing flag in the descriptor to tell the
core to use the provided affinity.
- Fix a shift out of bounds error in the Xilinx driver
- Handle switching to level trigger correctly in the RISCV APLIC
driver. It failed to retrigger the interrupt which causes it to
become stale"
* tag 'irq-urgent-2024-08-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/riscv-aplic: Retrigger MSI interrupt on source configuration
irqchip/xilinx: Fix shift out of bounds
genirq/irqdesc: Honor caller provided affinity in alloc_desc()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a number of small USB driver fixes for reported issues for
6.11-rc3. Included in here are:
- usb serial driver MODULE_DESCRIPTION() updates
- usb serial driver fixes
- typec driver fixes
- usb-ip driver fix
- gadget driver fixes
- dt binding update
All of these have been in linux-next with no reported issues"
* tag 'usb-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: ucsi: Fix a deadlock in ucsi_send_command_common()
usb: typec: tcpm: avoid sink goto SNK_UNATTACHED state if not received source capability message
usb: gadget: f_fs: pull out f->disable() from ffs_func_set_alt()
usb: gadget: f_fs: restore ffs_func_disable() functionality
USB: serial: debug: do not echo input by default
usb: typec: tipd: Delete extra semi-colon
usb: typec: tipd: Fix dereferencing freeing memory in tps6598x_apply_patch()
usb: gadget: u_serial: Set start_delayed during suspend
usb: typec: tcpci: Fix error code in tcpci_check_std_output_cap()
usb: typec: fsa4480: Check if the chip is really there
usb: gadget: core: Check for unset descriptor
usb: vhci-hcd: Do not drop references before new references are gained
usb: gadget: u_audio: Check return codes from usb_ep_enable and config_ep_by_speed.
usb: gadget: midi2: Fix the response for FB info with block 0xff
dt-bindings: usb: microchip,usb2514: Add USB2517 compatible
USB: serial: garmin_gps: use struct_size() to allocate pkt
USB: serial: garmin_gps: annotate struct garmin_packet with __counted_by
USB: serial: add missing MODULE_DESCRIPTION() macros
USB: serial: spcp8x5: remove unused struct 'spcp8x5_usb_ctrl_arg'
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver fixes from Greg KH:
"Here are some small tty and serial driver fixes for reported problems
for 6.11-rc3. Included in here are:
- sc16is7xx serial driver fixes
- uartclk bugfix for a divide by zero issue
- conmakehash userspace build issue fix
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: vt: conmakehash: cope with abs_srctree no longer in env
serial: sc16is7xx: fix invalid FIFO access with special register set
serial: sc16is7xx: fix TX fifo corruption
serial: core: check uartclk for zero to avoid divide by zero
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core / documentation fixes from Greg KH:
"Here are some small fixes, and some documentation updates for
6.11-rc3. Included in here are:
- embargoed hardware documenation updates based on a lot of review by
legal-types in lots of companies to try to make the process a _bit_
easier for us to manage over time.
- rust firmware documentation fix
- driver detach race fix for the fix that went into 6.11-rc1
All of these have been in linux-next for a while with no reported
issues"
* tag 'driver-core-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
driver core: Fix uevent_show() vs driver detach race
Documentation: embargoed-hardware-issues.rst: add a section documenting the "early access" process
Documentation: embargoed-hardware-issues.rst: minor cleanups and fixes
rust: firmware: fix invalid rustdoc link
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fixes from Greg KH:
"Here are some small char/misc/other driver fixes for 6.11-rc3 for
reported issues. Included in here are:
- binder driver fixes
- fsi MODULE_DESCRIPTION() additions (people seem to love them...)
- eeprom driver fix
- Kconfig dependency fix to resolve build issues
- spmi driver fixes
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
spmi: pmic-arb: add missing newline in dev_err format strings
spmi: pmic-arb: Pass the correct of_node to irq_domain_add_tree
binder_alloc: Fix sleeping function called from invalid context
binder: fix descriptor lookup for context manager
char: add missing NetWinder MODULE_DESCRIPTION() macros
misc: mrvl-cn10k-dpi: add PCI_IOV dependency
eeprom: ee1004: Fix locking issues in ee1004_probe()
fsi: add missing MODULE_DESCRIPTION() macros
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two core fixes: one to prevent discard type changes (seen on iSCSI)
during intermittent errors and the other is fixing a lockdep problem
caused by the queue limits change.
And one driver fix in ufs"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sd: Keep the discard mode stable
scsi: sd: Move sd_read_cpr() out of the q->limits_lock region
scsi: ufs: core: Fix hba->last_dme_cmd_tstamp timestamp updating logic
|
|
Fix noise from speakers connected to AUX port when no sound is playing.
The problem occurs because the `alc_shutup_pins` function includes
a 0x10ec0257 vendor ID, which causes noise on Lenovo IdeaPad 3 15IAU7 with
Realtek ALC257 codec when no sound is playing.
Removing this vendor ID from the function fixes the bug.
Fixes: 70794b9563fe ("ALSA: hda/realtek: Add more codec ID to no shutup pins list")
Signed-off-by: Parsa Poorshikhian <parsa.poorsh@gmail.com>
Link: https://patch.msgid.link/20240810150939.330693-1-parsa.poorsh@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
ueue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-08-07 (igc)
This series contains updates to igc driver only.
Faizal adjusts the size of the MAC internal buffer on i226 devices to
resolve an errata for leaking packet transmits. He also corrects a
condition in which qbv_config_change_errors are incorrectly counted.
Lastly, he adjusts the conditions for resetting the adapter when
changing TSN Tx mode and corrects the conditions in which gtxoffset
register is set.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
`ip_hdr(skb)->ihl << 2` is the same as `ip_hdrlen(skb)`
Therefore, we should use a well-defined function not a bit shift
to find the header length.
It also compresses two lines to a single line.
Signed-off-by: Moon Yeounsu <yyyynoom@gmail.com>
Reviewed-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
During Linux graceful reboot, the GPIO interrupts are not disabled.
Since the drivers are not removed during graceful reboot,
the logic to call mlxbf3_gpio_irq_disable() is not triggered.
Interrupts that remain enabled can cause issues on subsequent boots.
For example, the mlxbf-gige driver contains PHY logic to bring up the link.
If the gpio-mlxbf3 driver loads first, the mlxbf-gige driver
will use a GPIO interrupt to bring up the link.
Otherwise, it will use polling.
The next time Linux boots and loads the drivers in this order, we encounter the issue:
- mlxbf-gige loads first and uses polling while the GPIO10
interrupt is still enabled from the previous boot. So if
the interrupt triggers, there is nothing to clear it.
- gpio-mlxbf3 loads.
- i2c-mlxbf loads. The interrupt doesn't trigger for I2C
because it is shared with the GPIO interrupt line which
was not cleared.
The solution is to add a shutdown function to the GPIO driver to clear and disable
all interrupts. Also clear the interrupt after disabling it in mlxbf3_gpio_irq_disable().
Fixes: 38a700efc510 ("gpio: mlxbf3: Add gpio driver support")
Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
Reviewed-by: David Thompson <davthompson@nvidia.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240611171509.22151-1-asmaa@nvidia.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Two minor fixes for recent changes
* tag 'nfsd-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
nfsd: don't set SVC_SOCK_ANONYMOUS when creating nfsd sockets
sunrpc: avoid -Wformat-security warning
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- Two fixes for SMBusAlert handling in the I2C core: one to avoid an
endless loop when scanning for handlers and one to make sure handlers
are always called even if HW has broken behaviour
- I2C header build fix for when ACPI is enabled but I2C isn't
- The testunit gets a rename in the code to match the documentation
- Two fixes for the Qualcomm GENI I2C controller are cleaning up the
error exit patch in the runtime_resume() function. The first is
disabling the clock, the second disables the icc on the way out
* tag 'i2c-for-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: testunit: match HostNotify test name with docs
i2c: qcom-geni: Add missing geni_icc_disable in geni_i2c_runtime_resume
i2c: qcom-geni: Add missing clk_disable_unprepare in geni_i2c_runtime_resume
i2c: Fix conditional for substituting empty ACPI functions
i2c: smbus: Send alert notifications to all devices if source not found
i2c: smbus: Improve handling of stuck alerts
|
