summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-12-11splice: do not checksum AF_UNIX socketsFrederik Deweerdt
When `skb_splice_from_iter` was introduced, it inadvertently added checksumming for AF_UNIX sockets. This resulted in significant slowdowns, for example when using sendfile over unix sockets. Using the test code in [1] in my test setup (2G single core qemu), the client receives a 1000M file in: - without the patch: 1482ms (+/- 36ms) - with the patch: 652.5ms (+/- 22.9ms) This commit addresses the issue by marking checksumming as unnecessary in `unix_stream_sendmsg` Cc: stable@vger.kernel.org Signed-off-by: Frederik Deweerdt <deweerdt.lkml@gmail.com> Fixes: 2e910b95329c ("net: Add a function to splice pages into an skbuff for MSG_SPLICE_PAGES") Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Joe Damato <jdamato@fastly.com> Link: https://patch.msgid.link/Z1fMaHkRf8cfubuE@xiberoa Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-11net: usb: qmi_wwan: add Telit FE910C04 compositionsDaniele Palmas
Add the following Telit FE910C04 compositions: 0x10c0: rmnet + tty (AT/NMEA) + tty (AT) + tty (diag) T: Bus=02 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 13 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10c0 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FE910 S: SerialNumber=f71b8b32 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10c4: rmnet + tty (AT) + tty (AT) + tty (diag) T: Bus=02 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 14 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10c4 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FE910 S: SerialNumber=f71b8b32 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10c8: rmnet + tty (AT) + tty (diag) + DPL (data packet logging) + adb T: Bus=02 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 17 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10c8 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FE910 S: SerialNumber=f71b8b32 C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Link: https://patch.msgid.link/20241209151821.3688829-1-dnlplm@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-11Merge branch 'mana-fix-few-memory-leaks-in-mana_gd_setup_irqs'Jakub Kicinski
Maxim Levitsky says: ==================== MANA: Fix few memory leaks in mana_gd_setup_irqs Fix 2 minor memory leaks in the mana driver, introduced by commit ==================== Link: https://patch.msgid.link/20241209175751.287738-1-mlevitsk@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-11net: mana: Fix irq_contexts memory leak in mana_gd_setup_irqsMaxim Levitsky
gc->irq_contexts is not freeded if one of the later operations fail. Suggested-by: Michael Kelley <mhklinux@outlook.com> Fixes: 8afefc361209 ("net: mana: Assigning IRQ affinity on HT cores") Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com> Reviewed-by: Yury Norov <yury.norov@gmail.com> Link: https://patch.msgid.link/20241209175751.287738-3-mlevitsk@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-11net: mana: Fix memory leak in mana_gd_setup_irqsMaxim Levitsky
Commit 8afefc361209 ("net: mana: Assigning IRQ affinity on HT cores") added memory allocation in mana_gd_setup_irqs of 'irqs' but the code doesn't free this temporary array in the success path. This was caught by kmemleak. Fixes: 8afefc361209 ("net: mana: Assigning IRQ affinity on HT cores") Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com> Reviewed-by: Yury Norov <yury.norov@gmail.com> Link: https://patch.msgid.link/20241209175751.287738-2-mlevitsk@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-11MAINTAINERS: Add ethtool.h to NETWORKING [GENERAL]Simon Horman
This is part of an effort to assign a section in MAINTAINERS to header files related to Networking. In this case the files named ethool.h. Signed-off-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20241210-mnt-ethtool-h-v1-1-2a40b567939d@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-11netfilter: nf_tables: do not defer rule destruction via call_rcuFlorian Westphal
nf_tables_chain_destroy can sleep, it can't be used from call_rcu callbacks. Moreover, nf_tables_rule_release() is only safe for error unwinding, while transaction mutex is held and the to-be-desroyed rule was not exposed to either dataplane or dumps, as it deactives+frees without the required synchronize_rcu() in-between. nft_rule_expr_deactivate() callbacks will change ->use counters of other chains/sets, see e.g. nft_lookup .deactivate callback, these must be serialized via transaction mutex. Also add a few lockdep asserts to make this more explicit. Calling synchronize_rcu() isn't ideal, but fixing this without is hard and way more intrusive. As-is, we can get: WARNING: .. net/netfilter/nf_tables_api.c:5515 nft_set_destroy+0x.. Workqueue: events nf_tables_trans_destroy_work RIP: 0010:nft_set_destroy+0x3fe/0x5c0 Call Trace: <TASK> nf_tables_trans_destroy_work+0x6b7/0xad0 process_one_work+0x64a/0xce0 worker_thread+0x613/0x10d0 In case the synchronize_rcu becomes an issue, we can explore alternatives. One way would be to allocate nft_trans_rule objects + one nft_trans_chain object, deactivate the rules + the chain and then defer the freeing to the nft destroy workqueue. We'd still need to keep the synchronize_rcu path as a fallback to handle -ENOMEM corner cases though. Reported-by: syzbot+b26935466701e56cfdc2@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/67478d92.050a0220.253251.0062.GAE@google.com/T/ Fixes: c03d278fdf35 ("netfilter: nf_tables: wait for rcu grace period on net_device removal") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-12-11netfilter: IDLETIMER: Fix for possible ABBA deadlockPhil Sutter
Deletion of the last rule referencing a given idletimer may happen at the same time as a read of its file in sysfs: | ====================================================== | WARNING: possible circular locking dependency detected | 6.12.0-rc7-01692-g5e9a28f41134-dirty #594 Not tainted | ------------------------------------------------------ | iptables/3303 is trying to acquire lock: | ffff8881057e04b8 (kn->active#48){++++}-{0:0}, at: __kernfs_remove+0x20 | | but task is already holding lock: | ffffffffa0249068 (list_mutex){+.+.}-{3:3}, at: idletimer_tg_destroy_v] | | which lock already depends on the new lock. A simple reproducer is: | #!/bin/bash | | while true; do | iptables -A INPUT -i foo -j IDLETIMER --timeout 10 --label "testme" | iptables -D INPUT -i foo -j IDLETIMER --timeout 10 --label "testme" | done & | while true; do | cat /sys/class/xt_idletimer/timers/testme >/dev/null | done Avoid this by freeing list_mutex right after deleting the element from the list, then continuing with the teardown. Fixes: 0902b469bd25 ("netfilter: xtables: idletimer target implementation") Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-12-11selftests: netfilter: Stabilize rpath.shPhil Sutter
On some systems, neighbor discoveries from ns1 for fec0:42::1 (i.e., the martian trap address) would happen at the wrong time and cause false-negative test result. Problem analysis also discovered that IPv6 martian ping test was broken in that sent neighbor discoveries, not echo requests were inadvertently trapped Avoid the race condition by introducing the neighbors to each other upfront. Also pin down the firewall rules to matching on echo requests only. Fixes: efb056e5f1f0 ("netfilter: ip6t_rpfilter: Fix regression with VRF interfaces") Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-12-11Revert "unicode: Don't special case ignorable code points"Linus Torvalds
This reverts commit 5c26d2f1d3f5e4be3e196526bead29ecb139cf91. It turns out that we can't do this, because while the old behavior of ignoring ignorable code points was most definitely wrong, we have case-folding filesystems with on-disk hash values with that wrong behavior. So now you can't look up those names, because they hash to something different. Of course, it's also entirely possible that in the meantime people have created *new* files with the new ("more correct") case folding logic, and reverting will just make other things break. The correct solution is to not do case folding in filesystems, but sadly, people seem to never really understand that. People still see it as a feature, not a bug. Reported-by: Qi Han <hanqi@vivo.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=219586 Cc: Gabriel Krisman Bertazi <krisman@suse.de> Requested-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-12-11Merge tag 'vfio-v6.13-rc3' of https://github.com/awilliam/linux-vfioLinus Torvalds
Pull vfio fix from Alex Williamson: - Fix migration dirty page tracking support in the mlx5-vfio-pci variant driver in configurations where the system page size exceeds the device maximum message size, and anticipate device updates where the opposite may also be required (Yishai Hadas) * tag 'vfio-v6.13-rc3' of https://github.com/awilliam/linux-vfio: vfio/mlx5: Align the page tracking max message size with the device capability
2024-12-11Merge tag 'linux_kselftest-fixes-6.13-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest fix from Shuah Khan: - fix the offset for kprobe syntax error test case when checking the BTF arguments on 64-bit powerpc * tag 'linux_kselftest-fixes-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests/ftrace: adjust offset for kprobe syntax error test
2024-12-11selftests/ftrace: adjust offset for kprobe syntax error testHari Bathini
In 'NOFENTRY_ARGS' test case for syntax check, any offset X of `vfs_read+X` except function entry offset (0) fits the criterion, even if that offset is not at instruction boundary, as the parser comes before probing. But with "ENDBR64" instruction on x86, offset 4 is treated as function entry. So, X can't be 4 as well. Thus, 8 was used as offset for the test case. On 64-bit powerpc though, any offset <= 16 can be considered function entry depending on build configuration (see arch_kprobe_on_func_entry() for implementation details). So, use `vfs_read+20` to accommodate that scenario too. Link: https://lore.kernel.org/r/20241129202621.721159-1-hbathini@linux.ibm.com Fixes: 4231f30fcc34a ("selftests/ftrace: Add BTF arguments test cases") Suggested-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Hari Bathini <hbathini@linux.ibm.com> Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2024-12-11Bluetooth: Improve setsockopt() handling of malformed user inputMichal Luczaj
The bt_copy_from_sockptr() return value is being misinterpreted by most users: a non-zero result is mistakenly assumed to represent an error code, but actually indicates the number of bytes that could not be copied. Remove bt_copy_from_sockptr() and adapt callers to use copy_safe_from_sockptr(). For sco_sock_setsockopt() (case BT_CODEC) use copy_struct_from_sockptr() to scrub parts of uninitialized buffer. Opportunistically, rename `len` to `optlen` in hci_sock_setsockopt_old() and hci_sock_setsockopt(). Fixes: 51eda36d33e4 ("Bluetooth: SCO: Fix not validating setsockopt user input") Fixes: a97de7bff13b ("Bluetooth: RFCOMM: Fix not validating setsockopt user input") Fixes: 4f3951242ace ("Bluetooth: L2CAP: Fix not validating setsockopt user input") Fixes: 9e8742cdfc4b ("Bluetooth: ISO: Fix not validating setsockopt user input") Fixes: b2186061d604 ("Bluetooth: hci_sock: Fix not validating setsockopt user input") Reviewed-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Reviewed-by: David Wei <dw@davidwei.uk> Signed-off-by: Michal Luczaj <mhal@rbox.co> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-12-10net: renesas: rswitch: handle stop vs interrupt raceNikita Yushchenko
Currently the stop routine of rswitch driver does not immediately prevent hardware from continuing to update descriptors and requesting interrupts. It can happen that when rswitch_stop() executes the masking of interrupts from the queues of the port being closed, napi poll for that port is already scheduled or running on a different CPU. When execution of this napi poll completes, it will unmask the interrupts. And unmasked interrupt can fire after rswitch_stop() returns from napi_disable() call. Then, the handler won't mask it, because napi_schedule_prep() will return false, and interrupt storm will happen. This can't be fixed by making rswitch_stop() call napi_disable() before masking interrupts. In this case, the interrupt storm will happen if interrupt fires between napi_disable() and masking. Fix this by checking for priv->opened_ports bit when unmasking interrupts after napi poll. For that to be consistent, move priv->opened_ports changes into spinlock-protected areas, and reorder other operations in rswitch_open() and rswitch_stop() accordingly. Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Fixes: 3590918b5d07 ("net: ethernet: renesas: Add support for "Ethernet Switch"") Link: https://patch.msgid.link/20241209113204.175015-1-nikita.yoush@cogentembedded.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-10Merge branch 'net-renesas-rswitch-several-fixes'Jakub Kicinski
Nikita Yushchenko says: ==================== net: renesas: rswitch: several fixes This series fixes several glitches found in the rswitch driver. Repost of https://lore.kernel.org/20241206190015.4194153-1-nikita.yoush@cogentembedded.com ==================== Link: https://patch.msgid.link/20241208095004.69468-1-nikita.yoush@cogentembedded.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-10net: renesas: rswitch: avoid use-after-put for a device tree nodeNikita Yushchenko
The device tree node saved in the rswitch_device structure is used at several driver locations. So passing this node to of_node_put() after the first use is wrong. Move of_node_put() for this node to exit paths. Fixes: b46f1e579329 ("net: renesas: rswitch: Simplify struct phy * handling") Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://patch.msgid.link/20241208095004.69468-5-nikita.yoush@cogentembedded.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-10net: renesas: rswitch: fix leaked pointer on error pathNikita Yushchenko
If error path is taken while filling descriptor for a frame, skb pointer is left in the entry. Later, on the ring entry reuse, the same entry could be used as a part of a multi-descriptor frame, and skb for that new frame could be stored in a different entry. Then, the stale pointer will reach the completion routine, and passed to the release operation. Fix that by clearing the saved skb pointer at the error path. Fixes: d2c96b9d5f83 ("net: rswitch: Add jumbo frames handling for TX") Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://patch.msgid.link/20241208095004.69468-4-nikita.yoush@cogentembedded.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-10net: renesas: rswitch: fix race window between tx start and completeNikita Yushchenko
If hardware is already transmitting, it can start handling the descriptor being written to immediately after it observes updated DT field, before the queue is kicked by a write to GWTRC. If the start_xmit() execution is preempted at unfortunate moment, this transmission can complete, and interrupt handled, before gq->cur gets updated. With the current implementation of completion, this will cause the last entry not completed. Fix that by changing completion loop to check DT values directly, instead of depending on gq->cur. Fixes: 3590918b5d07 ("net: ethernet: renesas: Add support for "Ethernet Switch"") Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://patch.msgid.link/20241208095004.69468-3-nikita.yoush@cogentembedded.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-10net: renesas: rswitch: fix possible early skb releaseNikita Yushchenko
When sending frame split into multiple descriptors, hardware processes descriptors one by one, including writing back DT values. The first descriptor could be already marked as completed when processing of next descriptors for the same frame is still in progress. Although only the last descriptor is configured to generate interrupt, completion of the first descriptor could be noticed by the driver when handling interrupt for the previous frame. Currently, driver stores skb in the entry that corresponds to the first descriptor. This results into skb could be unmapped and freed when hardware did not complete the send yet. This opens a window for corrupting the data being sent. Fix this by saving skb in the entry that corresponds to the last descriptor used to send the frame. Fixes: d2c96b9d5f83 ("net: rswitch: Add jumbo frames handling for TX") Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://patch.msgid.link/20241208095004.69468-2-nikita.yoush@cogentembedded.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-10Merge tag 'wireless-2024-12-10' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Johannes Berg says: ==================== A small set of fixes: - avoid CSA warnings during link removal (by changing link bitmap after remove) - fix # of spatial streams initialisation - fix queues getting stuck in some CSA cases and resume failures - fix interface address when switching monitor mode - fix MBSS change flags 32-bit stack corruption - more UBSAN __counted_by "fixes" ... - fix link ID netlink validation * tag 'wireless-2024-12-10' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: cfg80211: sme: init n_channels before channels[] access wifi: mac80211: fix station NSS capability initialization order wifi: mac80211: fix vif addr when switching from monitor to station wifi: mac80211: fix a queue stall in certain cases of CSA wifi: mac80211: wake the queues in case of failure in resume wifi: cfg80211: clear link ID from bitmap during link delete after clean up wifi: mac80211: init cnt before accessing elem in ieee80211_copy_mbssid_beacon wifi: mac80211: fix mbss changed flags corruption on 32 bit systems wifi: nl80211: fix NL80211_ATTR_MLO_LINK_ID off-by-one ==================== Link: https://patch.msgid.link/20241210130145.28618-3-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-10tcp: check space before adding MPTCP SYN optionsMoYuanhao
Ensure there is enough space before adding MPTCP options in tcp_syn_options(). Without this check, 'remaining' could underflow, and causes issues. If there is not enough space, MPTCP should not be used. Signed-off-by: MoYuanhao <moyuanhao3676@163.com> Fixes: cec37a6e41aa ("mptcp: Handle MP_CAPABLE options for outgoing connections") Cc: stable@vger.kernel.org Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> [ Matt: Add Fixes, cc Stable, update Description ] Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20241209-net-mptcp-check-space-syn-v1-1-2da992bb6f74@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-10Documentation: networking: Add a caveat to nexthop_compat_mode sysctlPetr Machata
net.ipv4.nexthop_compat_mode was added when nexthop objects were added to provide the view of nexthop objects through the usual lens of the route UAPI. As nexthop objects evolved, the information provided through this lens became incomplete. For example, details of resilient nexthop groups are obviously omitted. Now that 16-bit nexthop group weights are a thing, the 8-bit UAPI cannot convey the >8-bit weight accurately. Instead of inventing workarounds for an obsolete interface, just document the expectations of inaccuracy. Fixes: b72a6a7ab957 ("net: nexthop: Increase weight to u16") Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/b575e32399ccacd09079b2a218255164535123bd.1733740749.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-10bnxt_en: Fix aggregation ID mask to prevent oops on 5760X chipsMichael Chan
The 5760X (P7) chip's HW GRO/LRO interface is very similar to that of the previous generation (5750X or P5). However, the aggregation ID fields in the completion structures on P7 have been redefined from 16 bits to 12 bits. The freed up 4 bits are redefined for part of the metadata such as the VLAN ID. The aggregation ID mask was not modified when adding support for P7 chips. Including the extra 4 bits for the aggregation ID can potentially cause the driver to store or fetch the packet header of GRO/LRO packets in the wrong TPA buffer. It may hit the BUG() condition in __skb_pull() because the SKB contains no valid packet header: kernel BUG at include/linux/skbuff.h:2766! Oops: invalid opcode: 0000 1 PREEMPT SMP NOPTI CPU: 4 UID: 0 PID: 0 Comm: swapper/4 Kdump: loaded Tainted: G OE 6.12.0-rc2+ #7 Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: Dell Inc. PowerEdge R760/0VRV9X, BIOS 1.0.1 12/27/2022 RIP: 0010:eth_type_trans+0xda/0x140 Code: 80 00 00 00 eb c1 8b 47 70 2b 47 74 48 8b 97 d0 00 00 00 83 f8 01 7e 1b 48 85 d2 74 06 66 83 3a ff 74 09 b8 00 04 00 00 eb a5 <0f> 0b b8 00 01 00 00 eb 9c 48 85 ff 74 eb 31 f6 b9 02 00 00 00 48 RSP: 0018:ff615003803fcc28 EFLAGS: 00010283 RAX: 00000000000022d2 RBX: 0000000000000003 RCX: ff2e8c25da334040 RDX: 0000000000000040 RSI: ff2e8c25c1ce8000 RDI: ff2e8c25869f9000 RBP: ff2e8c258c31c000 R08: ff2e8c25da334000 R09: 0000000000000001 R10: ff2e8c25da3342c0 R11: ff2e8c25c1ce89c0 R12: ff2e8c258e0990b0 R13: ff2e8c25bb120000 R14: ff2e8c25c1ce89c0 R15: ff2e8c25869f9000 FS: 0000000000000000(0000) GS:ff2e8c34be300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055f05317e4c8 CR3: 000000108bac6006 CR4: 0000000000773ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> ? die+0x33/0x90 ? do_trap+0xd9/0x100 ? eth_type_trans+0xda/0x140 ? do_error_trap+0x65/0x80 ? eth_type_trans+0xda/0x140 ? exc_invalid_op+0x4e/0x70 ? eth_type_trans+0xda/0x140 ? asm_exc_invalid_op+0x16/0x20 ? eth_type_trans+0xda/0x140 bnxt_tpa_end+0x10b/0x6b0 [bnxt_en] ? bnxt_tpa_start+0x195/0x320 [bnxt_en] bnxt_rx_pkt+0x902/0xd90 [bnxt_en] ? __bnxt_tx_int.constprop.0+0x89/0x300 [bnxt_en] ? kmem_cache_free+0x343/0x440 ? __bnxt_tx_int.constprop.0+0x24f/0x300 [bnxt_en] __bnxt_poll_work+0x193/0x370 [bnxt_en] bnxt_poll_p5+0x9a/0x300 [bnxt_en] ? try_to_wake_up+0x209/0x670 __napi_poll+0x29/0x1b0 Fix it by redefining the aggregation ID mask for P5_PLUS chips to be 12 bits. This will work because the maximum aggregation ID is less than 4096 on all P5_PLUS chips. Fixes: 13d2d3d381ee ("bnxt_en: Add new P7 hardware interface definitions") Reviewed-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20241209015448.1937766-1-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-10Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "Two reverts and two EN7581 driver fixes: - Revert the attempt to make CLK_GET_RATE_NOCACHE flag work in clk_set_rate() because it led to problems with the Qualcomm CPUFreq driver - Revert Amlogic reset driver back to the initial implementation. This broke probe of the audio subsystem on axg based platforms and also had compilation problems. We'll try again next time. - Fix a clk frequency and fix array bounds runtime checks in the Airoha EN7581 driver" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: en7523: Initialize num before accessing hws in en7523_register_clocks() clk: en7523: Fix wrong BUS clock for EN7581 clk: amlogic: axg-audio: revert reset implementation Revert "clk: Fix invalid execution of clk_set_rate"
2024-12-10Merge tag 'for-6.13-rc2-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "A few more fixes. Apart from the one liners and updated bio splitting error handling there's a fix for subvolume mount with different flags. This was known and fixed for some time but I've delayed it to give it more testing. - fix unbalanced locking when swapfile activation fails when the subvolume gets deleted in the meantime - add btrfs error handling after bio_split() calls that got error handling recently - during unmount, flush delalloc workers at the right time before the cleaner thread is shut down - fix regression in buffered write folio conversion, explicitly wait for writeback as FGP_STABLE flag is currently a no-op on btrfs - handle race in subvolume mount with different flags, the conversion to the new mount API did not handle the case where multiple subvolumes get mounted in parallel, which is a distro use case" * tag 'for-6.13-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: flush delalloc workers queue before stopping cleaner kthread during unmount btrfs: handle bio_split() errors btrfs: properly wait for writeback before buffered write btrfs: fix missing snapshot drew unlock when root is dead during swap activation btrfs: fix mount failure due to remount races
2024-12-10Merge tag 'probes-fixes-v6.13-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull eprobes fix from Masami Hiramatsu: - release eprobe when failing to add dyn_event. This unregisters event call and release eprobe when it fails to add a dynamic event. Found in cleaning up. * tag 'probes-fixes-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing/eprobe: Fix to release eprobe when failed to add dyn_event
2024-12-10udp: fix l4 hash after reconnectPaolo Abeni
After the blamed commit below, udp_rehash() is supposed to be called with both local and remote addresses set. Currently that is already the case for IPv6 sockets, but for IPv4 the destination address is updated after rehashing. Address the issue moving the destination address and port initialization before rehashing. Fixes: 1b29a730ef8b ("ipv6/udp: Add 4-tuple hash for connected socket") Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/4761e466ab9f7542c68cdc95f248987d127044d2.1733499715.git.pabeni@redhat.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-12-10Merge branch 'virtio_net-correct-netdev_tx_reset_queue-invocation-points'Paolo Abeni
Koichiro Den says: ==================== virtio_net: correct netdev_tx_reset_queue() invocation points When virtnet_close is followed by virtnet_open, some TX completions can possibly remain unconsumed, until they are finally processed during the first NAPI poll after the netdev_tx_reset_queue(), resulting in a crash [1]. Commit b96ed2c97c79 ("virtio_net: move netdev_tx_reset_queue() call before RX napi enable") was not sufficient to eliminate all BQL crash scenarios for virtio-net. This issue can be reproduced with the latest net-next master by running: `while :; do ip l set DEV down; ip l set DEV up; done` under heavy network TX load from inside the machine. This patch series resolves the issue and also addresses similar existing problems: (a). Drop netdev_tx_reset_queue() from open/close path. This eliminates the BQL crashes due to the problematic open/close path. (b). As a result of (a), netdev_tx_reset_queue() is now explicitly required in freeze/restore path. Add netdev_tx_reset_queue() immediately after free_unused_bufs() invocation. (c). Fix missing resetting in virtnet_tx_resize(). virtnet_tx_resize() has lacked proper resetting since commit c8bd1f7f3e61 ("virtio_net: add support for Byte Queue Limits"). (d). Fix missing resetting in the XDP_SETUP_XSK_POOL path. Similar to (c), this path lacked proper resetting. Call netdev_tx_reset_queue() when virtqueue_reset() has actually recycled unused buffers. This patch series consists of six commits: [1/6]: Resolves (a) and (b). # also -stable 6.11.y [2/6]: Minor fix to make [4/6] streamlined. [3/6]: Prerequisite for (c). # also -stable 6.11.y [4/6]: Resolves (c) (incl. Prerequisite for (d)) # also -stable 6.11.y [5/6]: Preresuisite for (d). [6/6]: Resolves (d). Changes for v4: - move netdev_tx_reset_queue() out of free_unused_bufs() - submit to net, not net-next Changes for v3: - replace 'flushed' argument with 'recycle_done' Changes for v2: - add tx queue resetting for (b) to (d) above v3: https://lore.kernel.org/all/20241204050724.307544-1-koichiro.den@canonical.com/ v2: https://lore.kernel.org/all/20241203073025.67065-1-koichiro.den@canonical.com/ v1: https://lore.kernel.org/all/20241130181744.3772632-1-koichiro.den@canonical.com/ [1]: ------------[ cut here ]------------ kernel BUG at lib/dynamic_queue_limits.c:99! Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 7 UID: 0 PID: 1598 Comm: ip Tainted: G N 6.12.0net-next_main+ #2 Tainted: [N]=TEST Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), \ BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 RIP: 0010:dql_completed+0x26b/0x290 Code: b7 c2 49 89 e9 44 89 da 89 c6 4c 89 d7 e8 ed 17 47 00 58 65 ff 0d 4d 27 90 7e 0f 85 fd fe ff ff e8 ea 53 8d ff e9 f3 fe ff ff <0f> 0b 01 d2 44 89 d1 29 d1 ba 00 00 00 00 0f 48 ca e9 28 ff ff ff RSP: 0018:ffffc900002b0d08 EFLAGS: 00010297 RAX: 0000000000000000 RBX: ffff888102398c80 RCX: 0000000080190009 RDX: 0000000000000000 RSI: 000000000000006a RDI: 0000000000000000 RBP: ffff888102398c00 R08: 0000000000000000 R09: 0000000000000000 R10: 00000000000000ca R11: 0000000000015681 R12: 0000000000000001 R13: ffffc900002b0d68 R14: ffff88811115e000 R15: ffff8881107aca40 FS: 00007f41ded69500(0000) GS:ffff888667dc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000556ccc2dc1a0 CR3: 0000000104fd8003 CR4: 0000000000772ef0 PKRU: 55555554 Call Trace: <IRQ> ? die+0x32/0x80 ? do_trap+0xd9/0x100 ? dql_completed+0x26b/0x290 ? dql_completed+0x26b/0x290 ? do_error_trap+0x6d/0xb0 ? dql_completed+0x26b/0x290 ? exc_invalid_op+0x4c/0x60 ? dql_completed+0x26b/0x290 ? asm_exc_invalid_op+0x16/0x20 ? dql_completed+0x26b/0x290 __free_old_xmit+0xff/0x170 [virtio_net] free_old_xmit+0x54/0xc0 [virtio_net] virtnet_poll+0xf4/0xe30 [virtio_net] ? __update_load_avg_cfs_rq+0x264/0x2d0 ? update_curr+0x35/0x260 ? reweight_entity+0x1be/0x260 __napi_poll.constprop.0+0x28/0x1c0 net_rx_action+0x329/0x420 ? enqueue_hrtimer+0x35/0x90 ? trace_hardirqs_on+0x1d/0x80 ? kvm_sched_clock_read+0xd/0x20 ? sched_clock+0xc/0x30 ? kvm_sched_clock_read+0xd/0x20 ? sched_clock+0xc/0x30 ? sched_clock_cpu+0xd/0x1a0 handle_softirqs+0x138/0x3e0 do_softirq.part.0+0x89/0xc0 </IRQ> <TASK> __local_bh_enable_ip+0xa7/0xb0 virtnet_open+0xc8/0x310 [virtio_net] __dev_open+0xfa/0x1b0 __dev_change_flags+0x1de/0x250 dev_change_flags+0x22/0x60 do_setlink.isra.0+0x2df/0x10b0 ? rtnetlink_rcv_msg+0x34f/0x3f0 ? netlink_rcv_skb+0x54/0x100 ? netlink_unicast+0x23e/0x390 ? netlink_sendmsg+0x21e/0x490 ? ____sys_sendmsg+0x31b/0x350 ? avc_has_perm_noaudit+0x67/0xf0 ? cred_has_capability.isra.0+0x75/0x110 ? __nla_validate_parse+0x5f/0xee0 ? __pfx___probestub_irq_enable+0x3/0x10 ? __create_object+0x5e/0x90 ? security_capable+0x3b/0x70 rtnl_newlink+0x784/0xaf0 ? avc_has_perm_noaudit+0x67/0xf0 ? cred_has_capability.isra.0+0x75/0x110 ? stack_depot_save_flags+0x24/0x6d0 ? __pfx_rtnl_newlink+0x10/0x10 rtnetlink_rcv_msg+0x34f/0x3f0 ? do_syscall_64+0x6c/0x180 ? entry_SYSCALL_64_after_hwframe+0x76/0x7e ? __pfx_rtnetlink_rcv_msg+0x10/0x10 netlink_rcv_skb+0x54/0x100 netlink_unicast+0x23e/0x390 netlink_sendmsg+0x21e/0x490 ____sys_sendmsg+0x31b/0x350 ? copy_msghdr_from_user+0x6d/0xa0 ___sys_sendmsg+0x86/0xd0 ? __pte_offset_map+0x17/0x160 ? preempt_count_add+0x69/0xa0 ? __call_rcu_common.constprop.0+0x147/0x610 ? preempt_count_add+0x69/0xa0 ? preempt_count_add+0x69/0xa0 ? _raw_spin_trylock+0x13/0x60 ? trace_hardirqs_on+0x1d/0x80 __sys_sendmsg+0x66/0xc0 do_syscall_64+0x6c/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f41defe5b34 Code: 15 e1 12 0f 00 f7 d8 64 89 02 b8 ff ff ff ff eb bf 0f 1f 44 00 00 f3 0f 1e fa 80 3d 35 95 0f 00 00 74 13 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 4c c3 0f 1f 00 55 48 89 e5 48 83 ec 20 89 55 RSP: 002b:00007ffe5336ecc8 EFLAGS: 00000202 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f41defe5b34 RDX: 0000000000000000 RSI: 00007ffe5336ed30 RDI: 0000000000000003 RBP: 00007ffe5336eda0 R08: 0000000000000010 R09: 0000000000000001 R10: 00007ffe5336f6f9 R11: 0000000000000202 R12: 0000000000000003 R13: 0000000067452259 R14: 0000556ccc28b040 R15: 0000000000000000 </TASK> [...] ==================== Link: https://patch.msgid.link/20241206011047.923923-1-koichiro.den@canonical.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-12-10virtio_net: ensure netdev_tx_reset_queue is called on bind xsk for txKoichiro Den
virtnet_sq_bind_xsk_pool() flushes tx skbs and then resets tx queue, so DQL counters need to be reset when flushing has actually occurred, Add virtnet_sq_free_unused_buf_done() as a callback for virtqueue_resize() to handle this. Fixes: 21a4e3ce6dc7 ("virtio_net: xsk: bind/unbind xsk for tx") Signed-off-by: Koichiro Den <koichiro.den@canonical.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-12-10virtio_ring: add a func argument 'recycle_done' to virtqueue_reset()Koichiro Den
When virtqueue_reset() has actually recycled all unused buffers, additional work may be required in some cases. Relying solely on its return status is fragile, so introduce a new function argument 'recycle_done', which is invoked when it really occurs. Signed-off-by: Koichiro Den <koichiro.den@canonical.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-12-10virtio_net: ensure netdev_tx_reset_queue is called on tx ring resizeKoichiro Den
virtnet_tx_resize() flushes remaining tx skbs, requiring DQL counters to be reset when flushing has actually occurred. Add virtnet_sq_free_unused_buf_done() as a callback for virtqueue_reset() to handle this. Fixes: c8bd1f7f3e61 ("virtio_net: add support for Byte Queue Limits") Cc: <stable@vger.kernel.org> # v6.11+ Signed-off-by: Koichiro Den <koichiro.den@canonical.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-12-10virtio_ring: add a func argument 'recycle_done' to virtqueue_resize()Koichiro Den
When virtqueue_resize() has actually recycled all unused buffers, additional work may be required in some cases. Relying solely on its return status is fragile, so introduce a new function argument 'recycle_done', which is invoked when the recycle really occurs. Cc: <stable@vger.kernel.org> # v6.11+ Signed-off-by: Koichiro Den <koichiro.den@canonical.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-12-10virtio_net: replace vq2rxq with vq2txq where appropriateKoichiro Den
While not harmful, using vq2rxq where it's always sq appears odd. Replace it with the more appropriate vq2txq for clarity and correctness. Fixes: 89f86675cb03 ("virtio_net: xsk: tx: support xmit xsk buffer") Signed-off-by: Koichiro Den <koichiro.den@canonical.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-12-10virtio_net: correct netdev_tx_reset_queue() invocation pointKoichiro Den
When virtnet_close is followed by virtnet_open, some TX completions can possibly remain unconsumed, until they are finally processed during the first NAPI poll after the netdev_tx_reset_queue(), resulting in a crash [1]. Commit b96ed2c97c79 ("virtio_net: move netdev_tx_reset_queue() call before RX napi enable") was not sufficient to eliminate all BQL crash cases for virtio-net. This issue can be reproduced with the latest net-next master by running: `while :; do ip l set DEV down; ip l set DEV up; done` under heavy network TX load from inside the machine. netdev_tx_reset_queue() can actually be dropped from virtnet_open path; the device is not stopped in any case. For BQL core part, it's just like traffic nearly ceases to exist for some period. For stall detector added to BQL, even if virtnet_close could somehow lead to some TX completions delayed for long, followed by virtnet_open, we can just take it as stall as mentioned in commit 6025b9135f7a ("net: dqs: add NIC stall detector based on BQL"). Note also that users can still reset stall_max via sysfs. So, drop netdev_tx_reset_queue() from virtnet_enable_queue_pair(). This eliminates the BQL crashes. As a result, netdev_tx_reset_queue() is now explicitly required in freeze/restore path. This patch adds it to immediately after free_unused_bufs(), following the rule of thumb: netdev_tx_reset_queue() should follow any SKB freeing not followed by netdev_tx_completed_queue(). This seems the most consistent and streamlined approach, and now netdev_tx_reset_queue() runs whenever free_unused_bufs() is done. [1]: ------------[ cut here ]------------ kernel BUG at lib/dynamic_queue_limits.c:99! Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 7 UID: 0 PID: 1598 Comm: ip Tainted: G N 6.12.0net-next_main+ #2 Tainted: [N]=TEST Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), \ BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 RIP: 0010:dql_completed+0x26b/0x290 Code: b7 c2 49 89 e9 44 89 da 89 c6 4c 89 d7 e8 ed 17 47 00 58 65 ff 0d 4d 27 90 7e 0f 85 fd fe ff ff e8 ea 53 8d ff e9 f3 fe ff ff <0f> 0b 01 d2 44 89 d1 29 d1 ba 00 00 00 00 0f 48 ca e9 28 ff ff ff RSP: 0018:ffffc900002b0d08 EFLAGS: 00010297 RAX: 0000000000000000 RBX: ffff888102398c80 RCX: 0000000080190009 RDX: 0000000000000000 RSI: 000000000000006a RDI: 0000000000000000 RBP: ffff888102398c00 R08: 0000000000000000 R09: 0000000000000000 R10: 00000000000000ca R11: 0000000000015681 R12: 0000000000000001 R13: ffffc900002b0d68 R14: ffff88811115e000 R15: ffff8881107aca40 FS: 00007f41ded69500(0000) GS:ffff888667dc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000556ccc2dc1a0 CR3: 0000000104fd8003 CR4: 0000000000772ef0 PKRU: 55555554 Call Trace: <IRQ> ? die+0x32/0x80 ? do_trap+0xd9/0x100 ? dql_completed+0x26b/0x290 ? dql_completed+0x26b/0x290 ? do_error_trap+0x6d/0xb0 ? dql_completed+0x26b/0x290 ? exc_invalid_op+0x4c/0x60 ? dql_completed+0x26b/0x290 ? asm_exc_invalid_op+0x16/0x20 ? dql_completed+0x26b/0x290 __free_old_xmit+0xff/0x170 [virtio_net] free_old_xmit+0x54/0xc0 [virtio_net] virtnet_poll+0xf4/0xe30 [virtio_net] ? __update_load_avg_cfs_rq+0x264/0x2d0 ? update_curr+0x35/0x260 ? reweight_entity+0x1be/0x260 __napi_poll.constprop.0+0x28/0x1c0 net_rx_action+0x329/0x420 ? enqueue_hrtimer+0x35/0x90 ? trace_hardirqs_on+0x1d/0x80 ? kvm_sched_clock_read+0xd/0x20 ? sched_clock+0xc/0x30 ? kvm_sched_clock_read+0xd/0x20 ? sched_clock+0xc/0x30 ? sched_clock_cpu+0xd/0x1a0 handle_softirqs+0x138/0x3e0 do_softirq.part.0+0x89/0xc0 </IRQ> <TASK> __local_bh_enable_ip+0xa7/0xb0 virtnet_open+0xc8/0x310 [virtio_net] __dev_open+0xfa/0x1b0 __dev_change_flags+0x1de/0x250 dev_change_flags+0x22/0x60 do_setlink.isra.0+0x2df/0x10b0 ? rtnetlink_rcv_msg+0x34f/0x3f0 ? netlink_rcv_skb+0x54/0x100 ? netlink_unicast+0x23e/0x390 ? netlink_sendmsg+0x21e/0x490 ? ____sys_sendmsg+0x31b/0x350 ? avc_has_perm_noaudit+0x67/0xf0 ? cred_has_capability.isra.0+0x75/0x110 ? __nla_validate_parse+0x5f/0xee0 ? __pfx___probestub_irq_enable+0x3/0x10 ? __create_object+0x5e/0x90 ? security_capable+0x3b/0x70 rtnl_newlink+0x784/0xaf0 ? avc_has_perm_noaudit+0x67/0xf0 ? cred_has_capability.isra.0+0x75/0x110 ? stack_depot_save_flags+0x24/0x6d0 ? __pfx_rtnl_newlink+0x10/0x10 rtnetlink_rcv_msg+0x34f/0x3f0 ? do_syscall_64+0x6c/0x180 ? entry_SYSCALL_64_after_hwframe+0x76/0x7e ? __pfx_rtnetlink_rcv_msg+0x10/0x10 netlink_rcv_skb+0x54/0x100 netlink_unicast+0x23e/0x390 netlink_sendmsg+0x21e/0x490 ____sys_sendmsg+0x31b/0x350 ? copy_msghdr_from_user+0x6d/0xa0 ___sys_sendmsg+0x86/0xd0 ? __pte_offset_map+0x17/0x160 ? preempt_count_add+0x69/0xa0 ? __call_rcu_common.constprop.0+0x147/0x610 ? preempt_count_add+0x69/0xa0 ? preempt_count_add+0x69/0xa0 ? _raw_spin_trylock+0x13/0x60 ? trace_hardirqs_on+0x1d/0x80 __sys_sendmsg+0x66/0xc0 do_syscall_64+0x6c/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f41defe5b34 Code: 15 e1 12 0f 00 f7 d8 64 89 02 b8 ff ff ff ff eb bf 0f 1f 44 00 00 f3 0f 1e fa 80 3d 35 95 0f 00 00 74 13 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 4c c3 0f 1f 00 55 48 89 e5 48 83 ec 20 89 55 RSP: 002b:00007ffe5336ecc8 EFLAGS: 00000202 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f41defe5b34 RDX: 0000000000000000 RSI: 00007ffe5336ed30 RDI: 0000000000000003 RBP: 00007ffe5336eda0 R08: 0000000000000010 R09: 0000000000000001 R10: 00007ffe5336f6f9 R11: 0000000000000202 R12: 0000000000000003 R13: 0000000067452259 R14: 0000556ccc28b040 R15: 0000000000000000 </TASK> [...] Fixes: c8bd1f7f3e61 ("virtio_net: add support for Byte Queue Limits") Cc: <stable@vger.kernel.org> # v6.11+ Signed-off-by: Koichiro Den <koichiro.den@canonical.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> [ pabeni: trimmed possibly troublesome separator ] Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-12-10octeontx2-af: Fix installation of PF multicast ruleGeetha sowjanya
Due to target variable is being reassigned in npc_install_flow() function, PF multicast rules are not getting installed. This patch addresses the issue by fixing the "IF" condition checks when rules are installed by AF. Fixes: 6c40ca957fe5 ("octeontx2-pf: Adds TC offload support"). Signed-off-by: Geetha sowjanya <gakula@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20241205113435.10601-1-gakula@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-12-09Merge branch 'qca_spi-fix-spi-specific-issues'Jakub Kicinski
Stefan Wahren says: ==================== qca_spi: Fix SPI specific issues This small series address two annoying SPI specific issues of the qca_spi driver. ==================== Link: https://patch.msgid.link/20241206184643.123399-1-wahrenst@gmx.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-09qca_spi: Make driver probing reliableStefan Wahren
The module parameter qcaspi_pluggable controls if QCA7000 signature should be checked at driver probe (current default) or not. Unfortunately this could fail in case the chip is temporary in reset, which isn't under total control by the Linux host. So disable this check per default in order to avoid unexpected probe failures. Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000") Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Link: https://patch.msgid.link/20241206184643.123399-3-wahrenst@gmx.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-09qca_spi: Fix clock speed for multiple QCA7000Stefan Wahren
Storing the maximum clock speed in module parameter qcaspi_clkspeed has the unintended side effect that the first probed instance defines the value for all other instances. Fix this issue by storing it in max_speed_hz of the relevant SPI device. This fix keeps the priority of the speed parameter (module parameter, device tree property, driver default). Btw this uses the opportunity to get the rid of the unused member clkspeed. Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000") Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Link: https://patch.msgid.link/20241206184643.123399-2-wahrenst@gmx.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-09cxgb4: use port number to set mac addrAnumula Murali Mohan Reddy
t4_set_vf_mac_acl() uses pf to set mac addr, but t4vf_get_vf_mac_acl() uses port number to get mac addr, this leads to error when an attempt to set MAC address on VF's of PF2 and PF3. This patch fixes the issue by using port number to set mac address. Fixes: e0cdac65ba26 ("cxgb4vf: configure ports accessible by the VF") Signed-off-by: Anumula Murali Mohan Reddy <anumula@chelsio.com> Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20241206062014.49414-1-anumula@chelsio.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-09Merge tag 'locking_urgent_for_v6.13_rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Borislav Petkov: - Remove if_not_guard() as it is generating incorrect code - Fix the initialization of the fake lockdep_map for the first locked ww_mutex * tag 'locking_urgent_for_v6.13_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: headers/cleanup.h: Remove the if_not_guard() facility locking/ww_mutex: Fix ww_mutex dummy lockdep map selftest warnings
2024-12-09Merge tag 'perf_urgent_for_v6.13_rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 perf fixes from Borislav Petkov: - Make sure the PEBS buffer is drained before reconfiguring the hardware - Add Arrow Lake U support * tag 'perf_urgent_for_v6.13_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel/ds: Unconditionally drain PEBS DS when changing PEBS_DATA_CFG perf/x86/intel: Add Arrow Lake U support
2024-12-09Merge tag 'sched_urgent_for_v6.13_rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Borislav Petkov: - Remove wrong enqueueing of a task for a later wakeup when a task blocks on a RT mutex - Do not setup a new deadline entity on a boosted task as that has happened already - Update preempt= kernel command line param - Prevent needless softirqd wakeups in the idle task's context - Detect the case where the idle load balancer CPU becomes busy and avoid unnecessary load balancing invocation - Remove an unnecessary load balancing need_resched() call in nohz_csd_func() - Allow for raising of SCHED_SOFTIRQ softirq type on RT but retain the warning to catch any other cases - Remove a wrong warning when a cpuset update makes the task affinity no longer a subset of the cpuset * tag 'sched_urgent_for_v6.13_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking: rtmutex: Fix wake_q logic in task_blocks_on_rt_mutex sched/deadline: Fix warning in migrate_enable for boosted tasks sched/core: Update kernel boot parameters for LAZY preempt. sched/core: Prevent wakeup of ksoftirqd during idle load balance sched/fair: Check idle_cpu() before need_resched() to detect ilb CPU turning busy sched/core: Remove the unnecessary need_resched() check in nohz_csd_func() softirq: Allow raising SCHED_SOFTIRQ from SMP-call-function on RT kernel sched: fix warning in sched_setaffinity sched/deadline: Fix replenish_dl_new_period dl_server condition
2024-12-09x86: Fix build regression with CONFIG_KEXEC_JUMP enabledDamien Le Moal
Build 6.13-rc12 for x86_64 with gcc 14.2.1 fails with the error: ld: vmlinux.o: in function `virtual_mapped': linux/arch/x86/kernel/relocate_kernel_64.S:249:(.text+0x5915b): undefined reference to `saved_context_gdt_desc' when CONFIG_KEXEC_JUMP is enabled. This was introduced by commit 07fa619f2a40 ("x86/kexec: Restore GDT on return from ::preserve_context kexec") which introduced a use of saved_context_gdt_desc without a declaration for it. Fix that by including asm/asm-offsets.h where saved_context_gdt_desc is defined (indirectly in include/generated/asm-offsets.h which asm/asm-offsets.h includes). Fixes: 07fa619f2a40 ("x86/kexec: Restore GDT on return from ::preserve_context kexec") Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Acked-by: Borislav Petkov (AMD) <bp@alien8.de> Acked-by: David Woodhouse <dwmw@amazon.co.uk> Closes: https://lore.kernel.org/oe-kbuild-all/202411270006.ZyyzpYf8-lkp@intel.com/ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-12-09futex: fix user access on powerpcLinus Torvalds
The powerpc user access code is special, and unlike other architectures distinguishes between user access for reading and writing. And commit 43a43faf5376 ("futex: improve user space accesses") messed that up. It went undetected elsewhere, but caused ppc32 to fail early during boot, because the user access had been started with user_read_access_begin(), but then finished off with just a plain "user_access_end()". Note that the address-masking user access helpers don't even have that read-vs-write distinction, so if powerpc ever wants to do address masking tricks, we'll have to do some extra work for it. [ Make sure to also do it for the EFAULT case, as pointed out by Christophe Leroy ] Reported-by: Andreas Schwab <schwab@linux-m68k.org> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Link: https://lore.kernel.org/all/87bjxl6b0i.fsf@igel.home/ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-12-09Merge branch 'net-sparx5-lan969x-fixes'David S. Miller
Daniel Machon says: ==================== net: sparx5: misc fixes for sparx5 and lan969x This series fixes various issues in the Sparx5 and lan969x drivers. Most of the fixes are for new issues introduced by the recent series adding lan969x switch support in the Sparx5 driver. Most notable is patch 1/5 that moves the lan969x dir into the sparx5 dir, in order to address a cyclic dependency issue reported by depmod, when installing modules. Details are in the commit descriptions. To: Andrew Lunn <andrew+netdev@lunn.ch> To: David S. Miller <davem@davemloft.net> To: Eric Dumazet <edumazet@google.com> To: Jakub Kicinski <kuba@kernel.org> To: Paolo Abeni <pabeni@redhat.com> To: Lars Povlsen <lars.povlsen@microchip.com> To: Steen Hegelund <Steen.Hegelund@microchip.com> To: UNGLinuxDriver@microchip.com To: Richard Cochran <richardcochran@gmail.com> To: Bjarni Jonasson <bjarni.jonasson@microchip.com> To: jensemil.schulzostergaard@microchip.com To: horatiu.vultur@microchip.com To: arnd@arndb.de To: jacob.e.keller@intel.com To: Parthiban.Veerasooran@microchip.com Cc: Calvin Owens <calvin@wbinvd.org> Cc: Muhammad Usama Anjum <Usama.Anjum@collabora.com> Cc: linux-kernel@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org ==================== Signed-off-by: Daniel Machon <daniel.machon@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-12-09net: sparx5: fix the maximum frame length registerDaniel Machon
On port initialization, we configure the maximum frame length accepted by the receive module associated with the port. This value is currently written to the MAX_LEN field of the DEV10G_MAC_ENA_CFG register, when in fact, it should be written to the DEV10G_MAC_MAXLEN_CFG register. Fix this. Fixes: 946e7fd5053a ("net: sparx5: add port module support") Signed-off-by: Daniel Machon <daniel.machon@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-12-09net: sparx5: fix default value of monitor portsDaniel Machon
When doing port mirroring, the physical port to send the frame to, is written to the FRMC_PORT_VAL field of the QFWD_FRAME_COPY_CFG register. This field is 7 bits wide on sparx5 and 6 bits wide on lan969x, and has a default value of 65 and 30, respectively (the number of front ports). On mirror deletion, we set the default value of the monitor port to 65 for this field, in case no more ports exists for the mirror. Needless to say, this will not fit the 6 bits on lan969x. Fix this by correctly using the n_ports constant instead. Fixes: 3f9e46347a46 ("net: sparx5: use SPX5_CONST for constants which already have a symbol") Signed-off-by: Daniel Machon <daniel.machon@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-12-09net: sparx5: fix FDMA performance issueDaniel Machon
The FDMA handler is responsible for scheduling a NAPI poll, which will eventually fetch RX packets from the FDMA queue. Currently, the FDMA handler is run in a threaded context. For some reason, this kills performance. Admittedly, I did not do a thorough investigation to see exactly what causes the issue, however, I noticed that in the other driver utilizing the same FDMA engine, we run the FDMA handler in hard IRQ context. Fix this performance issue, by running the FDMA handler in hard IRQ context, not deferring any work to a thread. Prior to this change, the RX UDP performance was: Interval Transfer Bitrate Jitter 0.00-10.20 sec 44.6 MBytes 36.7 Mbits/sec 0.027 ms After this change, the rx UDP performance is: Interval Transfer Bitrate Jitter 0.00-9.12 sec 1.01 GBytes 953 Mbits/sec 0.020 ms Fixes: 10615907e9b5 ("net: sparx5: switchdev: adding frame DMA functionality") Signed-off-by: Daniel Machon <daniel.machon@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-12-09net: lan969x: fix the use of spin_lock in PTP handlerDaniel Machon
We are mixing the use of spin_lock() and spin_lock_irqsave() functions in the PTP handler of lan969x. Fix this by correctly using the _irqsave variants. Fixes: 24fe83541755 ("net: lan969x: add PTP handler function") Signed-off-by: Daniel Machon <daniel.machon@microchip.com> [1]: https://lore.kernel.org/netdev/20241024-sparx5-lan969x-switch-driver-2-v2-10-a0b5fae88a0f@microchip.com/ Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-11 06:44:46 +0000