summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-03-20drm/radeon/kms: compute GPU addresses correctly on r600Marek Olšák
Signed-off-by: Marek Olšák <maraeo@gmail.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-03-20drm/radeon/kms: remove some unused variables in evergreen_cs_trackMarek Olšák
and document the other unused ones. Signed-off-by: Marek Olšák <maraeo@gmail.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-03-20drm/radeon/kms: skip db/cb/streamout checking when possible on evergreenMarek Olšák
Signed-off-by: Marek Olšák <maraeo@gmail.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-03-20drm/radeon/kms: optimize streamout checking for evergreenMarek Olšák
Signed-off-by: Marek Olšák <maraeo@gmail.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-03-20drm/radeon/kms: compute GPU addresses correctly on evergreenMarek Olšák
There are also two fixes: - In DRAW_INDEX_2, we read idx_value, but should have read idx+1. - When correcting SQ_VTX_CONSTANT_WORD1_0.SIZE, we should subtract the offset. Signed-off-by: Marek Olšák <maraeo@gmail.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-03-20drm/radeon/kms: make some DRM errors more informativeMarek Olšák
Signed-off-by: Marek Olšák <maraeo@gmail.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-03-20drm/radeon/kms: skip cb/db checking if SX_MISC is 1 on r600+Marek Olšák
Signed-off-by: Marek Olšák <maraeo@gmail.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-03-20drm/usb: move usb support into a separate moduleDave Airlie
In order to satisfy all the various Kconfig options between USB and DRM, we need to split the USB code out into a separate module and export symbols to it. This fixes build problems in -next reported by sfr. Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-03-20cpsw: Hook up default ndo_change_mtu.David S. Miller
Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-19[media] update CARDLIST.em28xxMauro Carvalho Chehab
Add the new DRX-K based devices there. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-19[media] partially reverts changeset fa5527cMauro Carvalho Chehab
This patch is applying some hunks that are already at changeset c247d7b, causing a compilation breakage. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-19[media] stb0899: fix the limits for signal strength valuesKlaus Schmidinger
stb0899: fix the limits for signal strength values stb0899_read_signal_strength() adds an offset to the result of the table lookup. That offset must correspond to the lowest value in the lookup table, to make sure the result doesn't get below 0, which would mean a "very high" value since the parameter is unsigned. 'strength' and 'snr' need to be initialized to 0 to make sure they have a defined result in case there is no "internal->lock". Signed-off-by: Klaus Schmidinger <Klaus.Schmidinger@tvdr.de> Cc: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-20Merge branch 'for-security' of ↵James Morris
git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor into next
2012-03-19[media] em28xx: support for 2304:0242 PCTV QuatroStick (510e)Ivan Kalvachev
It is mostly copy/paste of the 520e code with setting GPIO7 removed (no LED light). I've worked on just released vanilla linux-3.3.0 kernel, so there may be 1/2 lines offset to the internal working source, but most of the code should apply cleanly. I was able to get the DVB-C working (tuned and watched TV). Haven't tested DVB-T (no signal atm). Special thanks to everybody who worked on the code and to Antti Palosaari and Devin Heitmueller who provided essential support on irc. Hardware is based of: Empia EM2884 Micronas DRX 3926K NXP TDA18271HDC2 AVF4910 (not used atm) Signed-off-by: Ivan Kalvachev <ikalvachev@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-19[media] em28xx: support for 2013:0251 PCTV QuatroStick nano (520e)Antti Palosaari
Hardware is based of: Empia EM2884 Micronas DRX 3926K NXP TDA18271HDC2 ... + analog parts. Analog is not supported currently. Only DVB-T and DVB-C. There seems to be still problems for locking DVB-C channels which have strong signal. Attenuator helps. I think it is demodulator IF/RF AGC issue. Lets fix it later. Patches are welcome. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-19[media] -EINVAL -> -ENOTTYHans Verkuil
I found one more place where -EINVAL is used instead of -ENOTTY: Note that drivers/media/dvb/dvb-core/dvbdev.c has the same code, but as far as I can tell DVB is still using -EINVAL for unknown ioctls so I didn't change that. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-19[media] gspca - sn9c20x: Cleanup sourceJean-François Moine
- copyright change - use the kbuild module name for messages - remove useless code - add/remove blank lines, parenthesis, braces - add/change some information messages Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-19[media] gspca - sn9c20x: Simplify register write for capture start/stopJean-François Moine
The bridge register 1061 may take only the values 01 (stop) or 03 (start). Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-19[media] gspca - sn9c20x: Add automatic JPEG compression mechanismJean-François Moine
The JPEG compression may be adjusted from the packet fill ratio and from the flag 'USB FIFO full' returned in each frame. The code is adapted from the one in gspca sonixj and uses a workqueue. Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-19[media] gspca - sn9c20x: Greater delay in case of sensor no responseJean-François Moine
Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-19[media] gspca - sn9c20x: Optimize the code of write sequencesJean-François Moine
The new functions i2c_w1_buf() and i2c_w2_buf() handle the write loops. Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-19[media] gspca - sn9c20x: Add the JPEG compression quality controlJean-François Moine
The JPEG compression quality was hardcoded to 95%. This value was too big, raising often buffer overflows. This quality is now 80% by default and is settable. Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-19[media] gspca - sn9c20x: Add a delay after Omnivision sensor resetJean-François Moine
The reset of the Omnivision sensors takes a long time (200ms). Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-19[media] gspca - sn9c20x: Propagate USB errors to higher levelJean-François Moine
Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-19[media] gspca - sn9c20x: Use the new video control mechanismJean-François Moine
Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-19[media] gspca - sn9c20x: Fix loss of frame startJean-François Moine
The frame header was checked on packets of size 64 bytes only, while the webcams may put a frame header at the beginning of bigger packets. Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-19[media] gspca - zc3xx: Lack of register 08 value for sensor cs2102kJean-François Moine
The line defining the value of the register 08 for the sensor cs2102k was commented by error in commit 30c73d46. Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-19[media] gspca - ov534_9: Add brightness to OmniVision 5621 sensorJose Alberto Reguero
This patch adds brightness control to the OmniVision 5621 sensor. Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-19[media] gspca - zc3xx: Add V4L2_CID_JPEG_COMPRESSION_QUALITY control supportJean-François Moine
This patch is adapted from Sylwester's patch proposed on 2012/02/22. The JPEG compression control does not work with the autoquality done for the sensors hv7131r and pas202b. Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-19[media] pvrusb2: fix 7MHz & 8MHz DVB-T tuner support for HVR1900 rev D1F5Michael Krufky
The D1F5 revision of the WinTV HVR-1900 uses a tda18271c2 tuner instead of a tda18271c1 tuner as used in revision D1E9. To account for this, we must hardcode the frontend configuration to use the same IF frequency configuration for both revisions of the device. 6MHz DVB-T is unaffected by this issue, as the recommended IF Frequency configuration for 6MHz DVB-T is the same on both c1 and c2 revisions of the tda18271 tuner. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Cc: Mike Isely <isely@pobox.com> Cc: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-19[media] mxl111sf: fix error on stream stop in mxl111sf_ep6_streaming_ctrl()Michael Krufky
Remove unnecessary register access in mxl111sf_ep6_streaming_ctrl() This code breaks driver operation in kernel 3.3 and later, although it works properly in 3.2 Disable register access to 0x12 for now. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Cc: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-19[media] em28xx: support for 1b80:e425 MaxMedia UB425-TCAntti Palosaari
Hardware is based of: Empia EM2874B Micronas DRX 3913KA2 NXP TDA18271HDC2 Only DVB-C supported currently since missing firmware. According to my tests, DRX 3913KA2 demodulator requires firmware in order to support DVB-T mode. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-19AppArmor: Fix location of const qualifier on generated string tablesTetsuo Handa
Signed-off-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by: John Johansen <john.johansen@canonical.com>
2012-03-19[media] marvell-cam: Demote the "release" print to debug levelJonathan Corbet
We've spammed enough logfiles at this point. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-19[media] mmp-camera: Don't power up the sensor on resumeJonathan Corbet
We still need to power up the controller to avoid unsightly self-immolation should something try to access its registers, but the sensor can stay powered down unless the camera was actually operating at suspend time. This gets rid of the camera LED flash on resume, fixing OLPC bug #11644. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-19[media] marvell-cam: Don't signal multiple frame completions in ↵Jonathan Corbet
scatter/gather mode There is only one frame known to the DMA engine in scatter/gather mode, but it still tells us that any or all of frames 1-3 are done at each completion interrupt. Avoid the creation of junk frames by being sure to only "complete" one on each interrupt. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-19[media] marvell-cam: fix the green screen of deathJonathan Corbet
I had learned through hard experience that dinking around with the DMA descriptors while the C1_DESC_ENA enable bit was set is a recipe for all kinds of truly malicious behavior on the hardware's part, regardless of whether the DMA engine is actually operating at the time. That notwithstanding, the driver did so dink, resulting in "green frame" captures and the death of the system in random, spectacular ways. Move the tweaking of C1_DESC_ENA to the same function that sets the descriptor so we know that we'll never try to set a descriptor while that bit is set. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-19[media] marvell-cam: Increase the DMA shutdown timeoutJonathan Corbet
Experience shows that, on the Armada platform, it can take as much as 120ms for the DMA engine to actually shut down after it has been told to. So a 40ms timeout is not adequate; use 150ms instead. Also make sure we don't leave the DMA_ACTIVE flag set once things are down. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-19[media] marvell-cam: Remove broken "owner" logicJonathan Corbet
The marvell cam driver retained just enough of the owner-tracking logic from cafe_ccic to be broken; it could, conceivably, cause the driver to release DMA memory while the controller is still active. Simply remove the remaining pieces and ensure that the controller is stopped before we free things. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-19[media] marvell-cam: ensure that the camera stops when requestedJonathan Corbet
The controller stop/restart logic could possibly restart DMA after the driver things things have stopped, with suitably ugly results. Make sure that we only restart the hardware if we're supposed to be streaming. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-19[media] em28xx: Unused macro cleanupEzequiel García
Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-19[media] V4L: pxa_camera: add clk_prepare/clk_unprepare callsPhilipp Zabel
This patch adds clk_prepare/clk_unprepare calls to the pxa_camera driver by using the helper functions clk_prepare_enable and clk_disable_unprepare. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-19[media] V4L: sh_mobile_ceu_camera: maximum image size depends on the ↵Guennadi Liakhovetski
hardware version Newer CEU versions, e.g., the one, used on sh7372, support image sizes larger than 2560x1920. Retrieve maximum sizes from platform properties. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-19[media] V4L: soc-camera: call soc_camera_power_on() after adding the client ↵Guennadi Liakhovetski
to the host soc_camera_power_on() calls client's .s_power(1) method, which can try to access the client hardware. This, however, is typically only possible, after calling host's .add() method, because that's where the host driver usually turns the master clock on. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-19[media] rc: Pospone ir raw decoders loading until really neededEzequiel García
This changes rc_core to not load the IR decoders at load time, postponing it to load only if a RC_DRIVER_IR_RAW device is registered via rc_register_device. We use a static boolean variable, to ensure decoders modules are only loaded once. Tested with rc-loopback device only. Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com> Acked-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-20TOMOYO: Return error if fails to delete a domainTetsuo Handa
Call sequence: tomoyo_write_domain() --> tomoyo_delete_domain() In 'tomoyo_delete_domain', return -EINTR if locking attempt is interrupted by signal. At present it returns success to its caller 'tomoyo_write_domain()' even though domain is not deleted. 'tomoyo_write_domain()' assumes domain is deleted and returns success to its caller. This is wrong behaviour. 'tomoyo_write_domain' should return error from tomoyo_delete_domain() to its caller. Signed-off-by: Santosh Nayak <santoshprasadnayak@gmail.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-03-19Merge branch 'core-locking-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core/locking changes for v3.4 from Ingo Molnar * 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: futex: Simplify return logic futex: Cover all PI opcodes with cmpxchg enabled check
2012-03-19Merge branch 'core-iommu-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core/iommu changes for v3.4 from Ingo Molnar * 'core-iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/iommu/intel: Increase the number of iommus supported to MAX_IO_APICS x86/iommu/intel: Fix identity mapping for sandy bridge
2012-03-19Merge branch 'next' into for-linusDmitry Torokhov
2012-03-19Merge branch 'dcache-word-accesses'Linus Torvalds
* branch 'dcache-word-accesses': vfs: use 'unsigned long' accesses for dcache name comparison and hashing This does the name hashing and lookup using word-sized accesses when that is efficient, namely on x86 (although any little-endian machine with good unaligned accesses would do). It does very much depend on little-endian logic, but it's a very hot couple of functions under some real loads, and this patch improves the performance of __d_lookup_rcu() and link_path_walk() by up to about 30%. Giving a 10% improvement on some very pathname-heavy benchmarks. Because we do make unaligned accesses past the filename, the optimization is disabled when CONFIG_DEBUG_PAGEALLOC is active, and we effectively depend on the fact that on x86 we don't really ever have the last page of usable RAM followed immediately by any IO memory (due to ACPI tables, BIOS buffer areas etc). Some of the bit operations we do are a bit "subtle". It's commented, but you do need to really think about the code. Or just consider it black magic. Thanks to people on G+ for some of the optimized bit tricks.
generated by cgit (git 2.34.1) at 2025-09-14 13:57:50 +0000