| Age | Commit message (Collapse) | Author |
|---|
|
At the beginning in 2009 one patch [1] introduced collecting drop
counter in nf_conntrack_in() by returning -NF_DROP. Later, another
patch [2] changed the return value of tcp_packet() which now is
renamed to nf_conntrack_tcp_packet() from -NF_DROP to NF_DROP. As
we can see, that -NF_DROP should be corrected.
Similarly, there are other two points where the -NF_DROP is used.
Well, as NF_DROP is equal to 0, inverting NF_DROP makes no sense
as patch [2] said many years ago.
[1]
commit 7d1e04598e5e ("netfilter: nf_conntrack: account packets drop by tcp_packet()")
[2]
commit ec8d540969da ("netfilter: conntrack: fix dropping packet after l4proto->packet()")
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
We're using mutex_lock() inside a wait_event() conditional -
prepare_to_wait() has already flipped task state, so potentially
blocking ops need annotation.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Arnd Bergmann sent a patch to fsdevel, he says:
"orangefs_statfs() copies two consecutive fields of the superblock into
the statfs structure, which triggers a warning from the string fortification
helpers"
Jan Kara suggested an alternate way to do the patch to make it more readable.
I ran both ideas through xfstests and both seem fine. This patch
is based on Jan Kara's suggestion.
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
|
|
Add mmio trace events support, currently generic mmio events
KVM_TRACE_MMIO_WRITE/xxx_READ/xx_READ_UNSATISFIED are added here.
Also vcpu id field is added for all kvm trace events, since perf
KVM tool parses vcpu id information for kvm entry event.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
When VM runs in kvm mode, system will not exit to host mode when
executing a general software breakpoint instruction such as INSN_BREAK,
trap exception happens in guest mode rather than host mode. In order to
debug guest kernel on host side, one mechanism should be used to let VM
exit to host mode.
Here a hypercall instruction with a special code is used for software
breakpoint usage. VM exits to host mode and kvm hypervisor identifies
the special hypercall code and sets exit_reason with KVM_EXIT_DEBUG. And
then let qemu handle it.
Idea comes from ppc kvm, one api KVM_REG_LOONGARCH_DEBUG_INST is added
to get the hypercall code. VMM needs get sw breakpoint instruction with
this api and set the corresponding sw break point for guest kernel.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
PARAVIRT config option and PV IPI is added for the guest side, function
pv_ipi_init() is used to add IPI sending and IPI receiving hooks. This
function firstly checks whether system runs in VM mode, and if kernel
runs in VM mode, it will call function kvm_para_available() to detect
the current hypervirsor type (now only KVM type detection is supported).
The paravirt functions can work only if current hypervisor type is KVM,
since there is only KVM supported on LoongArch now.
PV IPI uses virtual IPI sender and virtual IPI receiver functions. With
virtual IPI sender, IPI message is stored in memory rather than emulated
HW. IPI multicast is also supported, and 128 vcpus can received IPIs
at the same time like X86 KVM method. Hypercall method is used for IPI
sending.
With virtual IPI receiver, HW SWI0 is used rather than real IPI HW.
Since VCPU has separate HW SWI0 like HW timer, there is no trap in IPI
interrupt acknowledge. Since IPI message is stored in memory, there is
no trap in getting IPI message.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
On LoongArch system, IPI hw uses iocsr registers. There are one iocsr
register access on IPI sending, and two iocsr access on IPI receiving
for the IPI interrupt handler. In VM mode all iocsr accessing will cause
VM to trap into hypervisor. So with one IPI hw notification there will
be three times of trap.
In this patch PV IPI is added for VM, hypercall instruction is used for
IPI sender, and hypervisor will inject an SWI to the destination vcpu.
During the SWI interrupt handler, only CSR.ESTAT register is written to
clear irq. CSR.ESTAT register access will not trap into hypervisor, so
with PV IPI supported, there is one trap with IPI sender, and no trap
with IPI receiver, there is only one trap with IPI notification.
Also this patch adds IPI multicast support, the method is similar with
x86. With IPI multicast support, IPI notification can be sent to at
most 128 vcpus at one time. It greatly reduces the times of trapping
into hypervisor.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Physical CPUID is used for interrupt routing for irqchips such as ipi,
msgint and eiointc interrupt controllers. Physical CPUID is stored at
the CSR register LOONGARCH_CSR_CPUID, it can not be changed once vcpu
is created and the physical CPUIDs of two vcpus cannot be the same.
Different irqchips have different size declaration about physical CPUID,
the max CPUID value for CSR LOONGARCH_CSR_CPUID on Loongson-3A5000 is
512, the max CPUID supported by IPI hardware is 1024, while for eiointc
irqchip is 256, and for msgint irqchip is 65536.
The smallest value from all interrupt controllers is selected now, and
the max cpuid size is defines as 256 by KVM which comes from the eiointc
irqchip.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Instruction cpucfg can be used to get processor features. And there
is a trap exception when it is executed in VM mode, and also it can be
used to provide cpu features to VM. On real hardware cpucfg area 0 - 20
is used by now. Here one specified area 0x40000000 -- 0x400000ff is used
for KVM hypervisor to provide PV features, and the area can be extended
for other hypervisors in future. This area will never be used for real
HW, it is only used by software.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
On LoongArch system, there is a hypercall instruction special for
virtualization. When system executes this instruction on host side,
there is an illegal instruction exception reported, however it will
trap into host when it is executed in VM mode.
When hypercall is emulated, A0 register is set with value
KVM_HCALL_INVALID_CODE, rather than inject EXCCODE_INE invalid
instruction exception. So VM can continue to executing the next code.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Refine the ipi handling on LoongArch platform, there are three
modifications:
1. Add generic function get_percpu_irq(), replacing some percpu irq
functions such as get_ipi_irq()/get_pmc_irq()/get_timer_irq() with
get_percpu_irq().
2. Change definition about parameter action called by function
loongson_send_ipi_single() and loongson_send_ipi_mask(), and it is
defined as decimal encoding format at ipi sender side. Normal decimal
encoding is used rather than binary bitmap encoding for ipi action, ipi
hw sender uses decimal encoding code, and ipi receiver will get binary
bitmap encoding, the ipi hw will convert it into bitmap in ipi message
buffer.
3. Add a structure smp_ops on LoongArch platform so that pv ipi can be
used later.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Switch to using the bsearch library function rather than having a hand
written binary search. Const-ify some static functions to avoid compiler
warnings.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Chengen Du <chengen.du@canonical.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Li Dong <lidong@vivo.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paran Lee <p4ranlee@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: zhaimingbing <zhaimingbing@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20240504213803.218974-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When security labeling is enabled, the client can pass a file security
label as part of a create operation for the new file, similar to mode
and other attributes. At present, the security label is received by nfsd
and passed down to nfsd_create_setattr(), but nfsd_setattr() is never
called and therefore the label is never set on the new file. This bug
may have been introduced on or around commit d6a97d3f589a ("NFSD:
add security label to struct nfsd_attrs"). Looking at nfsd_setattr()
I am uncertain as to whether the same issue presents for
file ACLs and therefore requires a similar fix for those.
An alternative approach would be to introduce a new LSM hook to set the
"create SID" of the current task prior to the actual file creation, which
would atomically label the new inode at creation time. This would be better
for SELinux and a similar approach has been used previously
(see security_dentry_create_files_as) but perhaps not usable by other LSMs.
Reproducer:
1. Install a Linux distro with SELinux - Fedora is easiest
2. git clone https://github.com/SELinuxProject/selinux-testsuite
3. Install the requisite dependencies per selinux-testsuite/README.md
4. Run something like the following script:
MOUNT=$HOME/selinux-testsuite
sudo systemctl start nfs-server
sudo exportfs -o rw,no_root_squash,security_label localhost:$MOUNT
sudo mkdir -p /mnt/selinux-testsuite
sudo mount -t nfs -o vers=4.2 localhost:$MOUNT /mnt/selinux-testsuite
pushd /mnt/selinux-testsuite/
sudo make -C policy load
pushd tests/filesystem
sudo runcon -t test_filesystem_t ./create_file -f trans_test_file \
-e test_filesystem_filetranscon_t -v
sudo rm -f trans_test_file
popd
sudo make -C policy unload
popd
sudo umount /mnt/selinux-testsuite
sudo exportfs -u localhost:$MOUNT
sudo rmdir /mnt/selinux-testsuite
sudo systemctl stop nfs-server
Expected output:
<eliding noise from commands run prior to or after the test itself>
Process context:
unconfined_u:unconfined_r:test_filesystem_t:s0-s0:c0.c1023
Created file: trans_test_file
File context: unconfined_u:object_r:test_filesystem_filetranscon_t:s0
File context is correct
Actual output:
<eliding noise from commands run prior to or after the test itself>
Process context:
unconfined_u:unconfined_r:test_filesystem_t:s0-s0:c0.c1023
Created file: trans_test_file
File context: system_u:object_r:test_file_t:s0
File context error, expected:
test_filesystem_filetranscon_t
got:
test_file_t
Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Clients that send an OFFLOAD_STATUS might want to distinguish
between an async COPY operation that is still running, has
completed successfully, or that has failed.
The intention of this patch is to make NFSD behave like this:
* Copy still running:
OFFLOAD_STATUS returns NFS4_OK, the number of bytes copied
so far, and an empty osr_status array
* Copy completed successfully:
OFFLOAD_STATUS returns NFS4_OK, the number of bytes copied,
and an osr_status of NFS4_OK
* Copy failed:
OFFLOAD_STATUS returns NFS4_OK, the number of bytes copied,
and an osr_status other than NFS4_OK
* Copy operation lost, canceled, or otherwise unrecognized:
OFFLOAD_STATUS returns NFS4ERR_BAD_STATEID
NB: Though RFC 7862 Section 11.2 lists a small set of NFS status
codes that are valid for OFFLOAD_STATUS, there do not seem to be any
explicit spec limits on the status codes that may be returned in the
osr_status field.
At this time we have no unit tests for COPY and its brethren, as
pynfs does not yet implement support for NFSv4.2.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
After a client has started an asynchronous COPY operation, a
subsequent OFFLOAD_STATUS operation will need to report the status
code once that COPY operation has completed. The recorded status
record will be used by a subsequent patch.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
It is obsolete since sp_lock was discarded in commit 580a25756a9f
("SUNRPC: discard sp_lock").
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Introduce write_ports netlink command. For listener-set, userspace is
expected to provide a NFS listeners list it wants enabled. All other
sockets will be closed.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Co-developed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
svc_find_listener will return the transport instance pointer for the
endpoint accepting connections/peer traffic from the specified transport
class and matching sockaddr.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Add svc_xprt_create_from_sa utility routine and refactor
svc_xprt_create() codebase in order to introduce the capability to
create a svc port from socket address.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Introduce write_version netlink command through a "declarative" interface.
This patch introduces a change in behavior since for version-set userspace
is expected to provide a NFS major/minor version list it wants to enable
while all the other ones will be disabled. (procfs write_version
command implements imperative interface where the admin writes +3/-3 to
enable/disable a single version.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Introduce write_threads netlink command similar to the one available
through the procfs.
Tested-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Co-developed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Currently admins set this by using unshare to create a new uts
namespace, and then resetting the hostname. With the new netlink
interface we can just pass this in directly. Prepare nfsd_svc for
this change.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Currently nfsd_svc holds the nfsd_mutex over the whole function. For
some of the later netlink patches though, we want to do some other
things to the server before starting it. Move the mutex handling into
the callers.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
In 'nlm_alloc_host', the host has already been assigned a value of NULL
when defined, so 'host=NULL;' Can be deleted.
Signed-off-by: Li kunyu <kunyu@nfschina.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
When CONFIG_NFSD_LEGACY_CLIENT_TRACKING is not set, the virtual file
/proc/fs/nfsd/nfsv4recoverydir
is created but responds EINVAL to any access.
This is not useful, is somewhat surprising, and it causes ltp to
complain.
The only known user of this file is in nfs-utils, which handles
non-existence and read-failure equally well. So there is nothing to
gain from leaving the file present but inaccessible.
So this patch removes the file when its content is not available - i.e.
when that config option is not selected.
Also remove the #ifdef which hides some of the enum values when
CONFIG_NFSD_V$ not selection. simple_fill_super() quietly ignores array
entries that are not present, so having slots in the array that don't
get used is perfectly acceptable. So there is no value in this #ifdef.
Reported-by: Petr Vorel <pvorel@suse.cz>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Fixes: 74fd48739d04 ("nfsd: new Kconfig option for legacy client tracking")
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
recalculate_deny_mode() takes time that is linear in the number of
stateids active on the file.
When called from
release_openowner -> free_ol_stateid_reaplist ->nfs4_free_ol_stateid
-> release_all_access
the number of times it is called is linear in the number of stateids.
The net result is that time taken by release_openowner is quadratic in
the number of stateids.
When the nfsd server is shut down while there are many active stateids
this can result in a soft lockup. ("CPU stuck for 302s" seen in one case).
In many cases all the states have the same deny modes and there is no
need to examine the entire list in recalculate_deny_mode(). In
particular, recalculate_deny_mode() will only reduce the deny mode,
never increase it. So if some prefix of the list causes the original
deny mode to be required, there is no need to examine the remainder of
the list.
So we can improve recalculate_deny_mode() to usually run in constant
time, so release_openowner will typically be only linear in the number
of states.
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Show client info alongside the number of cl_rpc_users. If that's
elevated, then we can infer that this function returned nfserr_jukebox.
[ cel: For additional debugging of RPC user refcounting ]
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Vladimir Benes <vbenes@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Replace a dprintk in check_slot_seqid with tracepoints. These new
tracepoints track slot sequence numbers during operation.
Suggested-by: Jeffrey Layton <jlayton@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
We never want a newline in tracepoint output.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Vladimir Benes <vbenes@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
since vs_proc pointer is dereferenced before getting it's address there's
no need to check for NULL.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 8e5b67731d08 ("SUNRPC: Add a callback to initialise server requests")
Signed-off-by: Aleksandr Aprelkov <aaprelkov@usergate.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Use group allocation/free of per-cpu counters api to accelerate
nfsd percpu_counters init/destroy(), and also squash the
nfsd_percpu_counters_init/reset/destroy() and nfsd_counters_init/destroy()
into callers to simplify code.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
This adds basic infrastructure for handing GET_DIR_DELEGATION calls from
clients, including the decoders and encoders. For now, it always just
returns NFS4_OK + GDD4_UNAVAIL.
Eventually clients may start sending this operation, and it's better if
we can return GDD4_UNAVAIL instead of having to abort the whole compound.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Commit 883820366747 ("nfsd: update workqueue creation") made the
callback_wq single-threaded, presumably to protect modifications of
cl_cb_client. See documenting comment for nfsd4_process_cb_update().
However, cl_cb_client is per-lease. There's no other reason that all
callback operations need to be dispatched via a single thread. The
single threading here means all client callbacks can be blocked by a
problem with one client.
Change the NFSv4 callback client so it serializes per-lease instead
of serializing all NFSv4 callback operations on the server.
Reported-by: Dai Ngo <dai.ngo@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
move_to_close_lru() is currently called with ->st_mutex held.
This can lead to a deadlock as move_to_close_lru() waits for sc_count to
drop to 2, and some threads holding a reference might be waiting for the
mutex. These references will never be dropped so sc_count will never
reach 2.
There can be no harm in dropping ->st_mutex before
move_to_close_lru() because the only place that takes the mutex is
nfsd4_lock_ol_stateid(), and it quickly aborts if sc_type is
NFS4_CLOSED_STID, which it will be before move_to_close_lru() is called.
See also
https://lore.kernel.org/lkml/4dd1fe21e11344e5969bb112e954affb@jd.com/T/
where this problem was raised but not successfully resolved.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
move_to_close_lru() waits for sc_count to become zero while holding
rp_mutex. This can deadlock if another thread holds a reference and is
waiting for rp_mutex.
By the time we get to move_to_close_lru() the openowner is unhashed and
cannot be found any more. So code waiting for the mutex can safely
retry the lookup if move_to_close_lru() has started.
So change rp_mutex to an atomic_t with three states:
RP_UNLOCK - state is still hashed, not locked for reply
RP_LOCKED - state is still hashed, is locked for reply
RP_UNHASHED - state is not hashed, no code can get a lock.
Use wait_var_event() to wait for either a lock, or for the owner to be
unhashed. In the latter case, retry the lookup.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Rather than taking the rp_mutex (via nfsd4_cstate_assign_replay) in
nfsd4_cleanup_open_state() (which seems counter-intuitive), take it and
assign rp_owner as soon as possible - in nfsd4_process_open1().
This will support a future change when nfsd4_cstate_assign_replay() might
fail.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Currently find_openstateowner_str look ups are done both in
nfsd4_process_open1() and alloc_init_open_stateowner() - the latter
possibly being a surprise based on its name.
It would be easier to follow, and more conformant to common patterns, if
the lookup was all in the one place.
So replace alloc_init_open_stateowner() with
find_or_alloc_open_stateowner() and use the latter in
nfsd4_process_open1() without any calls to find_openstateowner_str().
This means all finds are find_openstateowner_str_locked() and
find_openstateowner_str() is no longer needed. So discard
find_openstateowner_str() and rename find_openstateowner_str_locked() to
find_openstateowner_str().
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
No functional changes intended.
Fixes: f2298c0403b0 ("null_blk: multi queue aware block test driver")
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20240506075538.6064-1-yanjun.zhu@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Function was only called in dsos.c with the dso parameter as
NULL. Remove the function and specialize for the dso being NULL case
removing other unused functions along the way.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Chengen Du <chengen.du@canonical.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Li Dong <lidong@vivo.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paran Lee <p4ranlee@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: zhaimingbing <zhaimingbing@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20240504213803.218974-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Function no longer used so remove.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Chengen Du <chengen.du@canonical.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Li Dong <lidong@vivo.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paran Lee <p4ranlee@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: zhaimingbing <zhaimingbing@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20240504213803.218974-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
It is unused.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240506122848.20326-1-bp@kernel.org
|
|
The race condition around the ECCCLR register access happens in the IRQ
disable method called in the device remove() procedure and in the ECC IRQ
handler:
1. Enable IRQ:
a. ECCCLR = EN_CE | EN_UE
2. Disable IRQ:
a. ECCCLR = 0
3. IRQ handler:
a. ECCCLR = CLR_CE | CLR_CE_CNT | CLR_CE | CLR_CE_CNT
b. ECCCLR = 0
c. ECCCLR = EN_CE | EN_UE
So if the IRQ disabling procedure is called concurrently with the IRQ
handler method the IRQ might be actually left enabled due to the
statement 3c.
The root cause of the problem is that ECCCLR register (which since
v3.10a has been called as ECCCTL) has intermixed ECC status data clear
flags and the IRQ enable/disable flags. Thus the IRQ disabling (clear EN
flags) and handling (write 1 to clear ECC status data) procedures must
be serialised around the ECCCTL register modification to prevent the
race.
So fix the problem described above by adding the spin-lock around the
ECCCLR modifications and preventing the IRQ-handler from modifying the
IRQs enable flags (there is no point in disabling the IRQ and then
re-enabling it again within a single IRQ handler call, see the
statements 3a/3b and 3c above).
Fixes: f7824ded4149 ("EDAC/synopsys: Add support for version 3 of the Synopsys EDAC DDR")
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240222181324.28242-2-fancer.lancer@gmail.com
|
|
DSOs were held on a list for fast iteration and in an rbtree for fast
finds.
Switch to using a lazily sorted array where iteration is just iterating
through the array and binary searches are the same complexity as
searching the rbtree.
The find may need to sort the array first which does increase the
complexity, but add operations have lower complexity and overall the
complexity should remain about the same.
The set name operations on the dso just records that the array is no
longer sorted, avoiding complexity in rebalancing the rbtree.
Tighter locking discipline is enforced to avoid the array being resorted
while long and short names or ids are changed.
The array is smaller in size, replacing 6 pointers with 2, and so even
with extra allocated space in the array, the array may be 50%
unoccupied, the memory saving should be at least 2x.
Committer testing:
On a previous version of this patchset we were getting a lot of warnings
about deleting a DSO still on a list, now it is ok:
root@x1:~# perf probe -l
root@x1:~# perf probe finish_task_switch
Added new event:
probe:finish_task_switch (on finish_task_switch)
You can now use it in all perf tools, such as:
perf record -e probe:finish_task_switch -aR sleep 1
root@x1:~# perf probe -l
probe:finish_task_switch (on finish_task_switch@kernel/sched/core.c)
root@x1:~# perf trace -e probe:finish_task_switch/max-stack=8/ --max-events=1
0.000 migration/0/19 probe:finish_task_switch(__probe_ip: -1894408688)
finish_task_switch.isra.0 ([kernel.kallsyms])
__schedule ([kernel.kallsyms])
schedule ([kernel.kallsyms])
smpboot_thread_fn ([kernel.kallsyms])
kthread ([kernel.kallsyms])
ret_from_fork ([kernel.kallsyms])
ret_from_fork_asm ([kernel.kallsyms])
root@x1:~#
root@x1:~# perf probe -d probe:*
Removed event: probe:finish_task_switch
root@x1:~# perf probe -l
root@x1:~#
I also ran the full 'perf test' suite after applying this one, no
regressions.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Chengen Du <chengen.du@canonical.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Li Dong <lidong@vivo.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paran Lee <p4ranlee@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: zhaimingbing <zhaimingbing@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20240504213803.218974-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
There is code that builds with calls to IO accessors even when
CONFIG_PCI=n, but the actual calls are guarded by runtime checks.
If not those calls would be faulting, because the page at virtual
address zero is (usually) not mapped into the kernel. As Arnd pointed
out, it is possible a large port value could cause the address to be
above mmap_min_addr which would then access userspace, which would be
a bug.
To avoid any such issues, set _IO_BASE to POISON_POINTER_DELTA. That
is a value chosen to point into unmapped space between the kernel and
userspace, so any access will always fault.
Note that on 32-bit POISON_POINTER_DELTA is 0, so the patch only has an
effect on 64-bit.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240503075619.394467-2-mpe@ellerman.id.au
|
|
With -Wextra clang warns about pointer arithmetic using a null pointer.
When building with CONFIG_PCI=n, that triggers a warning in the IO
accessors, eg:
In file included from linux/arch/powerpc/include/asm/io.h:672:
linux/arch/powerpc/include/asm/io-defs.h:23:1: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
23 | DEF_PCI_AC_RET(inb, u8, (unsigned long port), (port), pio, port)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
...
linux/arch/powerpc/include/asm/io.h:591:53: note: expanded from macro '__do_inb'
591 | #define __do_inb(port) readb((PCI_IO_ADDR)_IO_BASE + port);
| ~~~~~~~~~~~~~~~~~~~~~ ^
That is because when CONFIG_PCI=n, _IO_BASE is defined as 0.
Although _IO_BASE is defined as plain 0, the cast (PCI_IO_ADDR) converts
it to void * before the addition with port happens.
Instead the addition can be done first, and then the cast. The resulting
value will be the same, but avoids the warning, and also avoids void
pointer arithmetic which is apparently non-standard.
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Closes: https://lore.kernel.org/all/CA+G9fYtEh8zmq8k8wE-8RZwW-Qr927RLTn+KqGnq1F=ptaaNsA@mail.gmail.com
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240503075619.394467-1-mpe@ellerman.id.au
|
|
Currently, bpf jit code on powerpc assumes all the bpf functions and
helpers to be part of core kernel text. This is false for kfunc case,
as function addresses may not be part of core kernel text area. So,
add support for addresses that are not within core kernel text area
too, to enable kfunc support. Emit instructions based on whether the
function address is within core kernel text address or not, to retain
optimized instruction sequence where possible.
In case of PCREL, as a bpf function that is not within core kernel
text area is likely to go out of range with relative addressing on
kernel base, use PC relative addressing. If that goes out of range,
load the full address with PPC_LI64().
With addresses that are not within core kernel text area supported,
override bpf_jit_supports_kfunc_call() to enable kfunc support. Also,
override bpf_jit_supports_far_kfunc_call() to enable 64-bit pointers,
as an address offset can be more than 32-bit long on PPC64.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240502173205.142794-2-hbathini@linux.ibm.com
|
|
With PCREL addressing, there is no kernel TOC. So, it is not setup in
prologue when PCREL addressing is used. But the number of instructions
to skip on a tail call was not adjusted accordingly. That resulted in
not so obvious failures while using tailcalls. 'tailcalls' selftest
crashed the system with the below call trace:
bpf_test_run+0xe8/0x3cc (unreliable)
bpf_prog_test_run_skb+0x348/0x778
__sys_bpf+0xb04/0x2b00
sys_bpf+0x28/0x38
system_call_exception+0x168/0x340
system_call_vectored_common+0x15c/0x2ec
Also, as bpf programs are always module addresses and a bpf helper in
general is a core kernel text address, using PC relative addressing
often fails with "out of range of pcrel address" error. Switch to
using kernel base for relative addressing to handle this better.
Fixes: 7e3a68be42e1 ("powerpc/64: vmlinux support building with PCREL addresing")
Cc: stable@vger.kernel.org # v6.4+
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240502173205.142794-1-hbathini@linux.ibm.com
|
|
This list was moved many years ago.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240503121012.3ba5000b@canb.auug.org.au
|
|
Documents how to use the PR_PPC_GET_DEXCR and PR_PPC_SET_DEXCR prctl()'s
for changing a process's DEXCR or its process tree default value.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240417112325.728010-10-bgray@linux.ibm.com
|
|
Adds a utility to exercise the prctl DEXCR inheritance in the shell.
Supports setting and clearing each aspect.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
[mpe: Use correct SPDX license, use execvp() for usability, print errors]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240417112325.728010-9-bgray@linux.ibm.com
|
